New upstream version 18.08

[deb_dpdk.git] / config / common_base

diff --git a/config/common_base b/config/common_base
index ad03cf4..4bcbaf9 100644 (file)
--- a/config/common_base
+++ b/config/common_base
@@ -61,7 +61,20 @@ CONFIG_RTE_CACHE_LINE_SIZE=64
 CONFIG_RTE_LIBRTE_EAL=y
 CONFIG_RTE_MAX_LCORE=128
 CONFIG_RTE_MAX_NUMA_NODES=8
-CONFIG_RTE_MAX_MEMSEG=256
+CONFIG_RTE_MAX_MEMSEG_LISTS=64
+# each memseg list will be limited to either RTE_MAX_MEMSEG_PER_LIST pages
+# or RTE_MAX_MEM_MB_PER_LIST megabytes worth of memory, whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_LIST=8192
+CONFIG_RTE_MAX_MEM_MB_PER_LIST=32768
+# a "type" is a combination of page size and NUMA node. total number of memseg
+# lists per type will be limited to either RTE_MAX_MEMSEG_PER_TYPE pages (split
+# over multiple lists of RTE_MAX_MEMSEG_PER_LIST pages), or
+# RTE_MAX_MEM_MB_PER_TYPE megabytes of memory (split over multiple lists of
+# RTE_MAX_MEM_MB_PER_LIST), whichever is smaller
+CONFIG_RTE_MAX_MEMSEG_PER_TYPE=32768
+CONFIG_RTE_MAX_MEM_MB_PER_TYPE=131072
+# global maximum usable amount of VA, in megabytes
+CONFIG_RTE_MAX_MEM_MB=524288
 CONFIG_RTE_MAX_MEMZONE=2560
 CONFIG_RTE_MAX_TAILQ=32
 CONFIG_RTE_ENABLE_ASSERT=n
@@ -74,8 +87,10 @@ CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
 CONFIG_RTE_EAL_IGB_UIO=n
 CONFIG_RTE_EAL_VFIO=n
 CONFIG_RTE_MAX_VFIO_GROUPS=64
+CONFIG_RTE_MAX_VFIO_CONTAINERS=64
 CONFIG_RTE_MALLOC_DEBUG=n
 CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
+CONFIG_RTE_USE_LIBBSD=n
 
 #
 # Recognize/ignore the AVX/AVX512 CPU flags for performance/power testing.
@@ -123,6 +138,11 @@ CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
 #
 CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
 
+#
+# Compile the Intel FPGA bus
+#
+CONFIG_RTE_LIBRTE_IFPGA_BUS=y
+
 #
 # Compile PCI bus driver
 #
@@ -143,6 +163,12 @@ CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
 CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
 
+#
+# Compile AMD PMD
+#
+CONFIG_RTE_LIBRTE_AXGBE_PMD=y
+CONFIG_RTE_LIBRTE_AXGBE_PMD_DEBUG=n
+
 #
 # Compile burst-oriented Broadcom PMD driver
 #
@@ -172,6 +198,7 @@ CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
 CONFIG_RTE_LIBRTE_DPAA_BUS=n
 CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
 CONFIG_RTE_LIBRTE_DPAA_PMD=n
+CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
 
 #
 # Compile NXP DPAA2 FSL-MC Bus
@@ -188,11 +215,7 @@ CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
 # Compile burst-oriented NXP DPAA2 PMD driver
 #
 CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
 CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
 
 #
 # Compile burst-oriented Amazon ENA PMD driver
@@ -241,8 +264,6 @@ CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
 
 #
 # Compile burst-oriented FM10K PMD
@@ -270,15 +291,14 @@ CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_MLX4_PMD=n
 CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
 
 #
-# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
+# Compile burst-oriented Mellanox ConnectX-4, ConnectX-5 & Bluefield
+# (MLX5) PMD
 #
 CONFIG_RTE_LIBRTE_MLX5_PMD=n
 CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
 CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
-CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
 
 #
 # Compile burst-oriented Netronome NFP PMD driver
@@ -306,11 +326,6 @@ CONFIG_RTE_LIBRTE_SFC_EFX_DEBUG=n
 # Compile software PMD backed by SZEDATA2 device
 #
 CONFIG_RTE_LIBRTE_PMD_SZEDATA2=n
-#
-# Defines firmware type address space.
-# See documentation for supported values.
-# Other values raise compile time error.
-CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS=0
 
 #
 # Compile burst-oriented Cavium Thunderx NICVF PMD driver
@@ -382,7 +397,20 @@ CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
 #
 # Compile Marvell PMD driver
 #
-CONFIG_RTE_LIBRTE_MRVL_PMD=n
+CONFIG_RTE_LIBRTE_MVPP2_PMD=n
+
+#
+# Compile support for VMBus library
+#
+CONFIG_RTE_LIBRTE_VMBUS=n
+
+#
+# Compile native PMD for Hyper-V/Azure
+#
+CONFIG_RTE_LIBRTE_NETVSC_PMD=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_NETVSC_DEBUG_DUMP=n
 
 #
 # Compile virtual device driver for NetVSC on Hyper-V/Azure
@@ -409,7 +437,7 @@ CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
 #
 # Compile SOFTNIC PMD
 #
-CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
+CONFIG_RTE_LIBRTE_PMD_SOFTNIC=n
 
 #
 # Compile the TAP PMD
@@ -427,6 +455,7 @@ CONFIG_RTE_PMD_PACKET_PREFETCH=y
 #
 CONFIG_RTE_LIBRTE_BBDEV=y
 CONFIG_RTE_BBDEV_MAX_DEVS=128
+CONFIG_RTE_BBDEV_OFFLOAD_COST=n
 
 #
 # Compile PMD for NULL bbdev device
@@ -442,7 +471,6 @@ CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
 # Compile generic crypto device library
 #
 CONFIG_RTE_LIBRTE_CRYPTODEV=y
-CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
 CONFIG_RTE_CRYPTO_MAX_DEVS=64
 
 #
@@ -455,49 +483,47 @@ CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO_DEBUG=n
 # Compile NXP DPAA2 crypto sec driver for CAAM HW
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA2_SEC=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
 
 #
 # NXP DPAA caam - crypto driver
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
 
 #
-# Compile PMD for QuickAssist based devices
+# Compile PMD for QuickAssist based devices - see docs for details
 #
-CONFIG_RTE_LIBRTE_PMD_QAT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_PMD_QAT_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_PMD_QAT=y
+CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
 #
-# Number of sessions to create in the session memory pool
-# on a single QuickAssist device.
+# Max. number of QuickAssist devices, which can be detected and attached
 #
-CONFIG_RTE_QAT_PMD_MAX_NB_SESSIONS=2048
+CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48
+CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16
+
+#
+# Compile PMD for virtio crypto devices
+#
+CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO=y
+#
+# Number of maximum virtio crypto devices
+#
+CONFIG_RTE_MAX_VIRTIO_CRYPTO=32
 
 #
 # Compile PMD for AESNI backed device
 #
 CONFIG_RTE_LIBRTE_PMD_AESNI_MB=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_MB_DEBUG=n
 
 #
 # Compile PMD for Software backed device
 #
 CONFIG_RTE_LIBRTE_PMD_OPENSSL=n
-CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n
 
 #
 # Compile PMD for AESNI GCM device
 #
 CONFIG_RTE_LIBRTE_PMD_AESNI_GCM=n
-CONFIG_RTE_LIBRTE_PMD_AESNI_GCM_DEBUG=n
 
 #
 # Compile PMD for SNOW 3G device
@@ -509,36 +535,63 @@ CONFIG_RTE_LIBRTE_PMD_SNOW3G_DEBUG=n
 # Compile PMD for KASUMI device
 #
 CONFIG_RTE_LIBRTE_PMD_KASUMI=n
-CONFIG_RTE_LIBRTE_PMD_KASUMI_DEBUG=n
 
 #
 # Compile PMD for ZUC device
 #
 CONFIG_RTE_LIBRTE_PMD_ZUC=n
-CONFIG_RTE_LIBRTE_PMD_ZUC_DEBUG=n
 
-#
 # Compile PMD for Crypto Scheduler device
 #
 CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER=y
-CONFIG_RTE_LIBRTE_PMD_CRYPTO_SCHEDULER_DEBUG=n
 
 #
 # Compile PMD for NULL Crypto device
 #
 CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
 
+#
+# Compile PMD for AMD CCP crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_CCP=n
+
 #
 # Compile PMD for Marvell Crypto device
 #
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
-CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO_DEBUG=n
 
 #
 # Compile generic security library
 #
 CONFIG_RTE_LIBRTE_SECURITY=y
 
+#
+# Compile generic compression device library
+#
+CONFIG_RTE_LIBRTE_COMPRESSDEV=y
+CONFIG_RTE_COMPRESS_MAX_DEVS=64
+
+#
+# Compile compressdev unit test
+#
+CONFIG_RTE_COMPRESSDEV_TEST=n
+
+#
+# Compile PMD for Octeontx ZIPVF compression device
+#
+CONFIG_RTE_LIBRTE_PMD_OCTEONTX_ZIPVF=y
+
+#
+# Compile PMD for ISA-L compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ISAL=n
+
+#
+# Compile PMD for ZLIB compression device
+#
+CONFIG_RTE_LIBRTE_PMD_ZLIB=n
+
 #
 # Compile generic event device library
 #
@@ -546,6 +599,9 @@ CONFIG_RTE_LIBRTE_EVENTDEV=y
 CONFIG_RTE_LIBRTE_EVENTDEV_DEBUG=n
 CONFIG_RTE_EVENT_MAX_DEVS=16
 CONFIG_RTE_EVENT_MAX_QUEUES_PER_DEV=64
+CONFIG_RTE_EVENT_TIMER_ADAPTER_NUM_MAX=32
+CONFIG_RTE_EVENT_ETH_INTR_RING_SIZE=1024
+CONFIG_RTE_EVENT_CRYPTO_ADAPTER_MAX_INSTANCE=32
 
 #
 # Compile PMD for skeleton event device
@@ -586,6 +642,21 @@ CONFIG_RTE_LIBRTE_RAWDEV=y
 CONFIG_RTE_RAWDEV_MAX_DEVS=10
 CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
 
+#
+# Compile PMD for NXP DPAA2 CMDIF raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_CMDIF_RAWDEV=n
+
+#
+# Compile PMD for NXP DPAA2 QDMA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_QDMA_RAWDEV=n
+
+#
+# Compile PMD for Intel FPGA raw device
+#
+CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y
+
 #
 # Compile librte_ring
 #
@@ -602,6 +673,8 @@ CONFIG_RTE_LIBRTE_MEMPOOL_DEBUG=n
 #
 # Compile Mempool drivers
 #
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET=y
+CONFIG_RTE_DRIVER_MEMPOOL_BUCKET_SIZE_KB=64
 CONFIG_RTE_DRIVER_MEMPOOL_RING=y
 CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
 
@@ -791,6 +864,20 @@ CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
 #
 CONFIG_RTE_LIBRTE_PMD_VHOST=n
 
+#
+# Compile IFC driver
+# To compile, CONFIG_RTE_LIBRTE_VHOST and CONFIG_RTE_EAL_VFIO
+# should be enabled.
+#
+CONFIG_RTE_LIBRTE_IFC_PMD=n
+
+#
+# Compile librte_bpf
+#
+CONFIG_RTE_LIBRTE_BPF=y
+# allow load BPF from ELF files (requires libelf)
+CONFIG_RTE_LIBRTE_BPF_ELF=n
+
 #
 # Compile the test application
 #