-# BSD LICENSE
-#
-# Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# * Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-# * Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
-# * Neither the name of Intel Corporation nor the names of its
-# contributors may be used to endorse or promote products derived
-# from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2010-2017 Intel Corporation
#
# define executive environment
CONFIG_RTE_MAX_MEMSEG=256
CONFIG_RTE_MAX_MEMZONE=2560
CONFIG_RTE_MAX_TAILQ=32
-CONFIG_RTE_LOG_LEVEL=RTE_LOG_INFO
+CONFIG_RTE_ENABLE_ASSERT=n
CONFIG_RTE_LOG_DP_LEVEL=RTE_LOG_INFO
CONFIG_RTE_LOG_HISTORY=256
CONFIG_RTE_BACKTRACE=y
CONFIG_RTE_EAL_ALWAYS_PANIC_ON_ERROR=n
CONFIG_RTE_EAL_IGB_UIO=n
CONFIG_RTE_EAL_VFIO=n
+CONFIG_RTE_MAX_VFIO_GROUPS=64
CONFIG_RTE_MALLOC_DEBUG=n
CONFIG_RTE_EAL_NUMA_AWARE_HUGEPAGES=n
#
CONFIG_RTE_LIBRTE_EAL_VMWARE_TSC_MAP_SUPPORT=y
+#
+# Compile the PCI library
+#
+CONFIG_RTE_LIBRTE_PCI=y
+
#
# Compile the argument parser library
#
CONFIG_RTE_LIBRTE_IEEE1588=n
CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16
CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y
+CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS=n
#
# Turn off Tx preparation stage
#
CONFIG_RTE_ETHDEV_TX_PREPARE_NOOP=n
+#
+# Compile PCI bus driver
+#
+CONFIG_RTE_LIBRTE_PCI_BUS=y
+
+#
+# Compile the vdev bus
+#
+CONFIG_RTE_LIBRTE_VDEV_BUS=y
+
+#
+# Compile ARK PMD
+#
+CONFIG_RTE_LIBRTE_ARK_PMD=y
+CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
+CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
+CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
+
+#
+# Compile burst-oriented Broadcom PMD driver
+#
+CONFIG_RTE_LIBRTE_BNX2X_PMD=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
+CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
+
+#
+# Compile burst-oriented Broadcom BNXT PMD driver
+#
+CONFIG_RTE_LIBRTE_BNXT_PMD=y
+
+#
+# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
+#
+CONFIG_RTE_LIBRTE_CXGBE_PMD=y
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
+
+# NXP DPAA Bus
+CONFIG_RTE_LIBRTE_DPAA_BUS=n
+CONFIG_RTE_LIBRTE_DPAA_MEMPOOL=n
+CONFIG_RTE_LIBRTE_DPAA_PMD=n
+
+#
+# Compile NXP DPAA2 FSL-MC Bus
+#
+CONFIG_RTE_LIBRTE_FSLMC_BUS=n
+
+#
+# Compile Support Libraries for NXP DPAA2
+#
+CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
+CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
+
+#
+# Compile burst-oriented NXP DPAA2 PMD driver
+#
+CONFIG_RTE_LIBRTE_DPAA2_PMD=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
+
#
# Compile burst-oriented Amazon ENA PMD driver
#
CONFIG_RTE_LIBRTE_ENA_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ENA_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_ENA_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_ENA_COM_DEBUG=n
+#
+# Compile burst-oriented Cisco ENIC PMD driver
+#
+CONFIG_RTE_LIBRTE_ENIC_PMD=y
+
#
# Compile burst-oriented IGB & EM PMD drivers
#
CONFIG_RTE_LIBRTE_EM_PMD=y
CONFIG_RTE_LIBRTE_IGB_PMD=y
-CONFIG_RTE_LIBRTE_E1000_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_RX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX=n
CONFIG_RTE_LIBRTE_E1000_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_E1000_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_E1000_PF_DISABLE_STRIP_CRC=n
#
# Compile burst-oriented IXGBE PMD driver
#
CONFIG_RTE_LIBRTE_IXGBE_PMD=y
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_IXGBE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_IXGBE_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_IXGBE_PF_DISABLE_STRIP_CRC=n
CONFIG_RTE_IXGBE_INC_VECTOR=y
CONFIG_RTE_LIBRTE_IXGBE_BYPASS=n
CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
-CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
# interval up to 8160 us, aligned to 2 (or default value)
CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
# Compile burst-oriented FM10K PMD
#
CONFIG_RTE_LIBRTE_FM10K_PMD=y
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_RX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX=n
CONFIG_RTE_LIBRTE_FM10K_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
CONFIG_RTE_LIBRTE_FM10K_INC_VECTOR=y
+#
+# Compile burst-oriented AVF PMD driver
+#
+CONFIG_RTE_LIBRTE_AVF_PMD=y
+CONFIG_RTE_LIBRTE_AVF_INC_VECTOR=y
+CONFIG_RTE_LIBRTE_AVF_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_AVF_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_AVF_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_AVF_16BYTE_RX_DESC=n
+
#
# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
#
CONFIG_RTE_LIBRTE_MLX4_PMD=n
CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
-CONFIG_RTE_LIBRTE_MLX4_DEBUG_BROKEN_VERBS=n
-CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
-CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS=n
CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
-CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
#
# Compile burst-oriented Mellanox ConnectX-4 & ConnectX-5 (MLX5) PMD
#
CONFIG_RTE_LIBRTE_MLX5_PMD=n
CONFIG_RTE_LIBRTE_MLX5_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS=n
CONFIG_RTE_LIBRTE_MLX5_TX_MP_CACHE=8
-#
-# Compile burst-oriented Broadcom PMD driver
-#
-CONFIG_RTE_LIBRTE_BNX2X_PMD=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_BNX2X_MF_SUPPORT=n
-CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC=n
-
-#
-# Compile burst-oriented Chelsio Terminator (CXGBE) PMD
-#
-CONFIG_RTE_LIBRTE_CXGBE_PMD=y
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_REG=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_MBOX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_CXGBE_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_CXGBE_TPUT=y
-
-#
-# Compile burst-oriented Cisco ENIC PMD driver
-#
-CONFIG_RTE_LIBRTE_ENIC_PMD=y
-CONFIG_RTE_LIBRTE_ENIC_DEBUG=n
-CONFIG_RTE_LIBRTE_ENIC_DEBUG_FLOW=n
-
#
# Compile burst-oriented Netronome NFP PMD driver
#
CONFIG_RTE_LIBRTE_NFP_PMD=n
-CONFIG_RTE_LIBRTE_NFP_DEBUG=n
+CONFIG_RTE_LIBRTE_NFP_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_NFP_DEBUG_RX=n
+# QLogic 10G/25G/40G/50G/100G PMD
#
-# Compile burst-oriented Broadcom BNXT PMD driver
-#
-CONFIG_RTE_LIBRTE_BNXT_PMD=y
+CONFIG_RTE_LIBRTE_QEDE_PMD=y
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
+#Provides abs path/name of the firmware file.
+#Empty string denotes driver will use default firmware
+CONFIG_RTE_LIBRTE_QEDE_FW=""
#
# Compile burst-oriented Solarflare libefx-based PMD
# Compile burst-oriented Cavium Thunderx NICVF PMD driver
#
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_PMD=y
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_RX=n
CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n
#
# Compile burst-oriented Cavium LiquidIO PMD driver
#
CONFIG_RTE_LIBRTE_LIO_PMD=y
-CONFIG_RTE_LIBRTE_LIO_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_LIO_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_TX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_MBOX=n
CONFIG_RTE_LIBRTE_LIO_DEBUG_REGS=n
#
-# Compile NXP DPAA2 FSL-MC Bus
+# Compile burst-oriented Cavium OCTEONTX network PMD driver
#
-CONFIG_RTE_LIBRTE_FSLMC_BUS=n
+CONFIG_RTE_LIBRTE_OCTEONTX_PMD=y
#
-# Compile Support Libraries for NXP DPAA2
-#
-CONFIG_RTE_LIBRTE_DPAA2_MEMPOOL=n
-CONFIG_RTE_LIBRTE_DPAA2_USE_PHYS_IOVA=y
-
-#
-# Compile burst-oriented NXP DPAA2 PMD driver
+# Compile WRS accelerated virtual port (AVP) guest PMD driver
#
-CONFIG_RTE_LIBRTE_DPAA2_PMD=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_DPAA2_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_AVP_PMD=n
+CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
#
# Compile burst-oriented VIRTIO PMD driver
#
CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_VIRTIO_DEBUG_DUMP=n
#
# Compile burst-oriented VMXNET3 PMD driver
#
CONFIG_RTE_LIBRTE_VMXNET3_PMD=y
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_INIT=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_RX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX=n
CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_VMXNET3_DEBUG_DRIVER=n
#
-# Compile example software rings based PMD
-#
-CONFIG_RTE_LIBRTE_PMD_RING=y
-CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
-CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
-
-#
-# Compile software PMD backed by PCAP files
+# Compile software PMD backed by AF_PACKET sockets (Linux only)
#
-CONFIG_RTE_LIBRTE_PMD_PCAP=n
+CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
#
# Compile link bonding PMD library
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB=n
CONFIG_RTE_LIBRTE_BOND_DEBUG_ALB_L1=n
-# QLogic 10G/25G/40G/50G/100G PMD
#
-CONFIG_RTE_LIBRTE_QEDE_PMD=y
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_INFO=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_QEDE_DEBUG_RX=n
-#Provides abs path/name of the firmware file.
-#Empty string denotes driver will use default firmware
-CONFIG_RTE_LIBRTE_QEDE_FW=""
+# Compile fail-safe PMD
+#
+CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
#
-# Compile software PMD backed by AF_PACKET sockets (Linux only)
+# Compile Marvell PMD driver
#
-CONFIG_RTE_LIBRTE_PMD_AF_PACKET=n
+CONFIG_RTE_LIBRTE_MRVL_PMD=n
#
-# Compile ARK PMD
+# Compile virtual device driver for NetVSC on Hyper-V/Azure
#
-CONFIG_RTE_LIBRTE_ARK_PMD=y
-CONFIG_RTE_LIBRTE_ARK_PAD_TX=y
-CONFIG_RTE_LIBRTE_ARK_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_STATS=n
-CONFIG_RTE_LIBRTE_ARK_DEBUG_TRACE=n
+CONFIG_RTE_LIBRTE_VDEV_NETVSC_PMD=n
#
-# Compile WRS accelerated virtual port (AVP) guest PMD driver
+# Compile null PMD
#
-CONFIG_RTE_LIBRTE_AVP_PMD=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_RX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_TX=n
-CONFIG_RTE_LIBRTE_AVP_DEBUG_DRIVER=y
-CONFIG_RTE_LIBRTE_AVP_DEBUG_BUFFERS=n
+CONFIG_RTE_LIBRTE_PMD_NULL=y
#
-# Compile the TAP PMD
-# It is enabled by default for Linux only.
+# Compile software PMD backed by PCAP files
#
-CONFIG_RTE_LIBRTE_PMD_TAP=n
+CONFIG_RTE_LIBRTE_PMD_PCAP=n
#
-# Compile Xen PMD
+# Compile example software rings based PMD
#
-CONFIG_RTE_LIBRTE_PMD_XENVIRT=n
+CONFIG_RTE_LIBRTE_PMD_RING=y
+CONFIG_RTE_PMD_RING_MAX_RX_RINGS=16
+CONFIG_RTE_PMD_RING_MAX_TX_RINGS=16
#
-# Compile null PMD
+# Compile SOFTNIC PMD
#
-CONFIG_RTE_LIBRTE_PMD_NULL=y
+CONFIG_RTE_LIBRTE_PMD_SOFTNIC=y
#
-# Compile fail-safe PMD
+# Compile the TAP PMD
+# It is enabled by default for Linux only.
#
-CONFIG_RTE_LIBRTE_PMD_FAILSAFE=y
+CONFIG_RTE_LIBRTE_PMD_TAP=n
#
# Do prefetch of packet data within PMD driver receive function
#
CONFIG_RTE_PMD_PACKET_PREFETCH=y
+# Compile generic wireless base band device library
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_BBDEV=y
+CONFIG_RTE_BBDEV_MAX_DEVS=128
+
+#
+# Compile PMD for NULL bbdev device
+#
+CONFIG_RTE_LIBRTE_PMD_BBDEV_NULL=y
+
+#
+# Compile PMD for turbo software bbdev device
+#
+CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=n
+
#
# Compile generic crypto device library
#
CONFIG_RTE_LIBRTE_CRYPTODEV=y
CONFIG_RTE_LIBRTE_CRYPTODEV_DEBUG=n
CONFIG_RTE_CRYPTO_MAX_DEVS=64
-CONFIG_RTE_CRYPTODEV_NAME_LEN=64
#
# Compile PMD for ARMv8 Crypto device
CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_DPAA2_SEC_DEBUG_RX=n
+#
+# NXP DPAA caam - crypto driver
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
+CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
+
#
# Compile PMD for QuickAssist based devices
#
#
CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO=y
+#
+# Compile PMD for Marvell Crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO=n
+CONFIG_RTE_LIBRTE_PMD_MRVL_CRYPTO_DEBUG=n
+
+#
+# Compile generic security library
+#
+CONFIG_RTE_LIBRTE_SECURITY=y
+
#
# Compile generic event device library
#
# Compile PMD for software event device
#
CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV=y
-CONFIG_RTE_LIBRTE_PMD_SW_EVENTDEV_DEBUG=n
#
# Compile PMD for octeontx sso event device
#
CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF=y
-CONFIG_RTE_LIBRTE_PMD_OCTEONTX_SSOVF_DEBUG=n
+
+#
+# Compile PMD for OPDL event device
+#
+CONFIG_RTE_LIBRTE_PMD_OPDL_EVENTDEV=y
+
+#
+# Compile PMD for NXP DPAA event device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n
+
+#
+# Compile PMD for NXP DPAA2 event device
+#
+CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n
+
+#
+# Compile raw device support
+# EXPERIMENTAL: API may change without prior notice
+#
+CONFIG_RTE_LIBRTE_RAWDEV=y
+CONFIG_RTE_RAWDEV_MAX_DEVS=10
+CONFIG_RTE_LIBRTE_PMD_SKELETON_RAWDEV=y
#
# Compile librte_ring
#
CONFIG_RTE_LIBRTE_RING=y
+CONFIG_RTE_RING_USE_C11_MEM_MODEL=n
#
# Compile librte_mempool
CONFIG_RTE_DRIVER_MEMPOOL_RING=y
CONFIG_RTE_DRIVER_MEMPOOL_STACK=y
+#
+# Compile PMD for octeontx fpa mempool device
+#
+CONFIG_RTE_LIBRTE_OCTEONTX_MEMPOOL=y
+
#
# Compile librte_mbuf
#
#
CONFIG_RTE_LIBRTE_EFD=y
+#
+# Compile librte_member
+#
+CONFIG_RTE_LIBRTE_MEMBER=y
+
#
# Compile librte_jobstats
#
#
CONFIG_RTE_LIBRTE_GRO=y
+#
+# Compile GSO library
+#
+CONFIG_RTE_LIBRTE_GSO=y
+
#
# Compile librte_meter
#
CONFIG_RTE_LIBRTE_METER=y
+#
+# Compile librte_classify
+#
+CONFIG_RTE_LIBRTE_FLOW_CLASSIFY=y
+
#
# Compile librte_sched
#
#
CONFIG_RTE_LIBRTE_PMD_VHOST=n
-#
-#Compile Xen domain0 support
-#
-CONFIG_RTE_LIBRTE_XEN_DOM0=n
-
#
# Compile the test application
#
CONFIG_RTE_APP_TEST=y
CONFIG_RTE_APP_TEST_RESOURCE_TAR=n
+#
+# Compile the procinfo application
+#
+CONFIG_RTE_PROC_INFO=n
+
#
# Compile the PMD test application
#
CONFIG_RTE_TEST_PMD_RECORD_CORE_CYCLES=n
CONFIG_RTE_TEST_PMD_RECORD_BURST_STATS=n
+#
+# Compile the bbdev test application
+#
+CONFIG_RTE_TEST_BBDEV=y
+
#
# Compile the crypto performance application
#
Code Review / deb_dpdk.git / blobdiff