-.. BSD LICENSE
- Copyright(c) 2016 Intel Corporation. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
-
- * Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in
- the documentation and/or other materials provided with the
- distribution.
- * Neither the name of Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived
- from this software without specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2016 Intel Corporation.
KASUMI Crypto Poll Mode Driver
===============================
-----------
* Chained mbufs are not supported.
-* KASUMI(F9) supported only if hash offset field is byte-aligned.
+* KASUMI(F9) supported only if hash offset and length field is byte-aligned.
* In-place bit-level operations for KASUMI(F8) are not supported
(if length and/or offset of data to be ciphered is not byte-aligned).
make
+**Note**: When encrypting with KASUMI F8, by default the library
+encrypts full blocks of 8 bytes, regardless the number of bytes to
+be encrypted provided (which leads to a possible buffer overflow).
+To avoid this situation, it is necessary not to pass
+3GPP_SAFE_BUFFERS as a compilation flag.
+Also, this is required when using chained operations
+(cipher-then-auth/auth-then-cipher).
+For this, in the Makefile of the library, make sure that this flag
+is commented out::
+
+ #EXTRA_CFLAGS += -D_3GPP_SAFE_BUFFERS
+
**Note**: To build the PMD as a shared library, the libsso_kasumi
library must be built as follows::
.. code-block:: console
- ./l2fwd-crypto -l 6 -n 4 --vdev="crypto_kasumi,socket_id=1,max_nb_sessions=128"
+ ./l2fwd-crypto -l 1 -n 4 --vdev="crypto_kasumi,socket_id=0,max_nb_sessions=128" \
+ -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "kasumi-f8"
+
+Extra notes on KASUMI F9
+------------------------
+
+When using KASUMI F9 authentication algorithm, the input buffer must be
+constructed according to the 3GPP KASUMI specifications (section 4.4, page 13):
+`<http://cryptome.org/3gpp/35201-900.pdf>`_.
+Input buffer has to have COUNT (4 bytes), FRESH (4 bytes), MESSAGE and DIRECTION (1 bit)
+concatenated. After the DIRECTION bit, a single '1' bit is appended, followed by
+between 0 and 7 '0' bits, so that the total length of the buffer is multiple of 8 bits.
+Note that the actual message can be any length, specified in bits.
+
+Once this buffer is passed this way, when creating the crypto operation,
+length of data to authenticate (op.sym.auth.data.length) must be the length
+of all the items described above, including the padding at the end.
+Also, offset of data to authenticate (op.sym.auth.data.offset)
+must be such that points at the start of the COUNT bytes.
Code Review / deb_dpdk.git / blobdiff