--- /dev/null
+.. BSD LICENSE
+ Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+.. _install_from_ports:
+
+Installing DPDK from the Ports Collection
+=========================================
+
+The easiest way to get up and running with the DPDK on FreeBSD is to
+install it from the ports collection. Details of getting and using the ports
+collection are documented in the
+`FreeBSD Handbook <http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/index.html>`_.
+
+.. note::
+
+ Testing has been performed using FreeBSD 10.0-RELEASE (x86_64) and requires the
+ installation of the kernel sources, which should be included during the
+ installation of FreeBSD.
+
+Installing the DPDK FreeBSD Port
+--------------------------------
+
+On a system with the ports collection installed in ``/usr/ports``, the DPDK
+can be installed using the commands:
+
+.. code-block:: console
+
+ cd /usr/ports/net/dpdk
+
+ make install
+
+After the installation of the DPDK port, instructions will be printed on
+how to install the kernel modules required to use the DPDK. A more
+complete version of these instructions can be found in the sections
+:ref:`loading_contigmem` and :ref:`loading_nic_uio`. Normally, lines like
+those below would be added to the file ``/boot/loader.conf``.
+
+.. code-block:: console
+
+ # Reserve 2 x 1G blocks of contiguous memory using contigmem driver:
+ hw.contigmem.num_buffers=2
+ hw.contigmem.buffer_size=1073741824
+ contigmem_load="YES"
+
+ # Identify NIC devices for DPDK apps to use and load nic_uio driver:
+ hw.nic_uio.bdfs="2:0:0,2:0:1"
+ nic_uio_load="YES"
+
+Compiling and Running the Example Applications
+----------------------------------------------
+
+When the DPDK has been installed from the ports collection it installs
+its example applications in ``/usr/local/share/dpdk/examples`` - also accessible via
+symlink as ``/usr/local/share/examples/dpdk``. These examples can be compiled and
+run as described in :ref:`compiling_sample_apps`. In this case, the required
+environmental variables should be set as below:
+
+* ``RTE_SDK=/usr/local/share/dpdk``
+
+* ``RTE_TARGET=x86_64-native-bsdapp-clang``
+
+.. note::
+
+ To install a copy of the DPDK compiled using gcc, please download the
+ official DPDK package from http://dpdk.org/ and install manually using
+ the instructions given in the next chapter, :ref:`building_from_source`
+
+An example application can therefore be copied to a user's home directory and
+compiled and run as below:
+
+.. code-block:: console
+
+ export RTE_SDK=/usr/local/share/dpdk
+
+ export RTE_TARGET=x86_64-native-bsdapp-clang
+
+ cp -r /usr/local/share/dpdk/examples/helloworld .
+
+ cd helloworld/
+
+ gmake
+ CC main.o
+ LD helloworld
+ INSTALL-APP helloworld
+ INSTALL-MAP helloworld.map
+
+ sudo ./build/helloworld -c F -n 2
+
+ EAL: Contigmem driver has 2 buffers, each of size 1GB
+ EAL: Sysctl reports 8 cpus
+ EAL: Detected lcore 0
+ EAL: Detected lcore 1
+ EAL: Detected lcore 2
+ EAL: Detected lcore 3
+ EAL: Support maximum 64 logical core(s) by configuration.
+ EAL: Detected 4 lcore(s)
+ EAL: Setting up physically contiguous memory...
+ EAL: Mapped memory segment 1 @ 0x802400000: len 1073741824
+ EAL: Mapped memory segment 2 @ 0x842400000: len 1073741824
+ EAL: WARNING: clock_gettime cannot use CLOCK_MONOTONIC_RAW and HPET
+ is not available - clock timings may be less accurate.
+ EAL: TSC frequency is ~3569023 KHz
+ EAL: PCI scan found 24 devices
+ EAL: Master core 0 is ready (tid=0x802006400)
+ EAL: Core 1 is ready (tid=0x802006800)
+ EAL: Core 3 is ready (tid=0x802007000)
+ EAL: Core 2 is ready (tid=0x802006c00)
+ EAL: PCI device 0000:01:00.0 on NUMA socket 0
+ EAL: probe driver: 8086:10fb rte_ixgbe_pmd
+ EAL: PCI memory mapped at 0x80074a000
+ EAL: PCI memory mapped at 0x8007ca000
+ EAL: PCI device 0000:01:00.1 on NUMA socket 0
+ EAL: probe driver: 8086:10fb rte_ixgbe_pmd
+ EAL: PCI memory mapped at 0x8007ce000
+ EAL: PCI memory mapped at 0x80084e000
+ EAL: PCI device 0000:02:00.0 on NUMA socket 0
+ EAL: probe driver: 8086:10fb rte_ixgbe_pmd
+ EAL: PCI memory mapped at 0x800852000
+ EAL: PCI memory mapped at 0x8008d2000
+ EAL: PCI device 0000:02:00.1 on NUMA socket 0
+ EAL: probe driver: 8086:10fb rte_ixgbe_pmd
+ EAL: PCI memory mapped at 0x801b3f000
+ EAL: PCI memory mapped at 0x8008d6000
+ hello from core 1
+ hello from core 2
+ hello from core 3
+ hello from core 0
+
+.. note::
+
+ To run a DPDK process as a non-root user, adjust the permissions on
+ the ``/dev/contigmem`` and ``/dev/uio device`` nodes as described in section
+ :ref:`running_non_root`
+
+.. note::
+
+ For an explanation of the command-line parameters that can be passed to an
+ DPDK application, see section :ref:`running_sample_app`.
Code Review / deb_dpdk.git / blobdiff