Please see :ref:`Limitations <enic_limitations>` for limitations in
the use of SR-IOV.
+.. _enic-genic-flow-api:
+
+Generic Flow API support
+------------------------
+
+Generic Flow API is supported. The baseline support is:
+
+- **1200 series VICs**
+
+ 5-tuple exact Flow support for 1200 series adapters. This allows:
+
+ - Attributes: ingress
+ - Items: ipv4, ipv6, udp, tcp (must exactly match src/dst IP
+ addresses and ports and all must be specified).
+ - Actions: queue and void
+ - Selectors: 'is'
+
+- **1300 series VICS with Advanced filters disabled**
+
+ With advanced filters disabled, an IPv4 or IPv6 item must be specified
+ in the pattern.
+
+ - Attributes: ingress
+ - Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp
+ - Actions: queue and void
+ - Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
+ - In total, up to 64 bytes of mask is allowed across all haeders
+
+- **1300 series VICS with Advanced filters enabled**
+
+ - Attributes: ingress
+ - Items: eth, ipv4, ipv6, udp, tcp, vxlan, inner eth, ipv4, ipv6, udp, tcp
+ - Actions: queue, mark, flag and void
+ - Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
+ - In total, up to 64 bytes of mask is allowed across all haeders
+
+More features may be added in future firmware and new versions of the VIC.
+Please refer to the release notes.
+
+Ingress VLAN Rewrite
+--------------------
+
+VIC adapters can tag, untag, or modify the VLAN headers of ingress
+packets. The ingress VLAN rewrite mode controls this behavior. By
+default, it is set to pass-through, where the NIC does not modify the
+VLAN header in any way so that the application can see the original
+header. This mode is sufficient for many applications, but may not be
+suitable for others. Such applications may change the mode by setting
+``devargs`` parameter ``ig-vlan-rewrite`` to one of the following.
+
+- ``pass``: Pass-through mode. The NIC does not modify the VLAN
+ header. This is the default mode.
+
+- ``priority``: Priority-tag default VLAN mode. If the ingress packet
+ is tagged with the default VLAN, the NIC replaces its VLAN header
+ with the priority tag (VLAN ID 0).
+
+- ``trunk``: Default trunk mode. The NIC tags untagged ingress packets
+ with the default VLAN. Tagged ingress packets are not modified. To
+ the application, every packet appears as tagged.
+
+- ``untag``: Untag default VLAN mode. If the ingress packet is tagged
+ with the default VLAN, the NIC removes or untags its VLAN header so
+ that the application sees an untagged packet. As a result, the
+ default VLAN becomes `untagged`. This mode can be useful for
+ applications such as OVS-DPDK performance benchmarks that utilize
+ only the default VLAN and want to see only untagged packets.
+
.. _enic_limitations:
Limitations
In test setups where an Ethernet port of a Cisco adapter in TRUNK mode is
connected point-to-point to another adapter port or connected though a router
instead of a switch, all ingress packets will be VLAN tagged. Programs such
- as l3fwd which do not account for VLAN tags in packets will misbehave. The
- solution is to enable VLAN stripping on ingress. The follow code fragment is
- example of how to accomplish this:
+ as l3fwd may not account for VLAN tags in packets and may misbehave. One
+ solution is to enable VLAN stripping on ingress so the VLAN tag is removed
+ from the packet and put into the mbuf->vlan_tci field. Here is an example
+ of how to accomplish this:
.. code-block:: console
vlan_offload |= ETH_VLAN_STRIP_OFFLOAD;
rte_eth_dev_set_vlan_offload(port, vlan_offload);
+Another alternative is modify the adapter's ingress VLAN rewrite mode so that
+packets with the default VLAN tag are stripped by the adapter and presented to
+DPDK as untagged packets. In this case mbuf->vlan_tci and the PKT_RX_VLAN and
+PKT_RX_VLAN_STRIPPED mbuf flags would not be set. This mode is enabled with the
+``devargs`` parameter ``ig-vlan-rewrite=untag``. For example::
+
+ -w 12:00.0,ig-vlan-rewrite=untag
+
- Limited flow director support on 1200 series and 1300 series Cisco VIC
adapters with old firmware. Please see :ref:`enic-flow-director`.
- The number of SR-IOV devices is limited to 256. Components on target system
might limit this number to fewer than 256.
+- **Flow API**
+
+ - The number of filters that can be specified with the Generic Flow API is
+ dependent on how many header fields are being masked. Use 'flow create' in
+ a loop to determine how many filters your VIC will support (not more than
+ 1000 for 1300 series VICs). Filter are checked for matching in the order they
+ were added. Since there currently is no grouping or priority support,
+ 'catch-all' filters should be added last.
+
How to build the suite
----------------------
+The build instructions for the DPDK suite should be followed. By default
+the ENIC PMD library will be built into the DPDK library.
+
Refer to the document :ref:`compiling and testing a PMD for a NIC
<pmd_build_and_test>` for details.
- Scattered Rx
- MTU update
- SR-IOV on UCS managed servers connected to Fabric Interconnects.
+- Flow API
Known bugs and unsupported features in this release
---------------------------------------------------
Code Review / deb_dpdk.git / blobdiff