MLX5 poll mode driver
=====================
-The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support for
-**Mellanox ConnectX-4** and **Mellanox ConnectX-4 Lx** families of
-10/25/40/50/100 Gb/s adapters as well as their virtual functions (VF) in
-SR-IOV context.
+The MLX5 poll mode driver library (**librte_pmd_mlx5**) provides support
+for **Mellanox ConnectX-4**, **Mellanox ConnectX-4 Lx** and **Mellanox
+ConnectX-5** families of 10/25/40/50/100 Gb/s adapters as well as their
+virtual functions (VF) in SR-IOV context.
Information and documentation about these adapters can be found on the
`Mellanox website <http://www.mellanox.com>`__. Help is also provided by the
- Hardware checksum offloads.
- Flow director (RTE_FDIR_MODE_PERFECT, RTE_FDIR_MODE_PERFECT_MAC_VLAN and
RTE_ETH_FDIR_REJECT).
+- Flow API.
- Secondary process TX is supported.
- KVM and VMware ESX SR-IOV modes are supported.
- RSS hash result is supported.
+- Hardware TSO.
+- Hardware checksum TX offload for VXLAN and GRE.
Limitations
-----------
- Inner RSS for VXLAN frames is not supported yet.
- Port statistics through software counters only.
-- Hardware checksum offloads for VXLAN inner header are not supported yet.
+- Hardware checksum RX offloads for VXLAN inner header are not supported yet.
- Secondary process RX is not supported.
Configuration
- ``txq_mpw_en`` parameter [int]
- A nonzero value enables multi-packet send. This feature allows the TX
- burst function to pack up to five packets in two descriptors in order to
- save PCI bandwidth and improve performance at the cost of a slightly
- higher CPU usage.
+ A nonzero value enables multi-packet send (MPS) for ConnectX-4 Lx and
+ enhanced multi-packet send (Enhanced MPS) for ConnectX-5. MPS allows the
+ TX burst function to pack up multiple packets in a single descriptor
+ session in order to save PCI bandwidth and improve performance at the
+ cost of a slightly higher CPU usage. When ``txq_inline`` is set along
+ with ``txq_mpw_en``, TX burst function tries to copy entire packet data
+ on to TX descriptor instead of including pointer of packet only if there
+ is enough room remained in the descriptor. ``txq_inline`` sets
+ per-descriptor space for either pointers or inlined packets. In addition,
+ Enhanced MPS supports hybrid mode - mixing inlined packets and pointers
+ in the same descriptor.
- It is currently only supported on the ConnectX-4 Lx family of adapters.
- Enabled by default.
+ This option cannot be used in conjunction with ``tso`` below. When ``tso``
+ is set, ``txq_mpw_en`` is disabled.
+
+ It is currently only supported on the ConnectX-4 Lx and ConnectX-5
+ families of adapters. Enabled by default.
+
+- ``txq_mpw_hdr_dseg_en`` parameter [int]
+
+ A nonzero value enables including two pointers in the first block of TX
+ descriptor. This can be used to lessen CPU load for memory copy.
+
+ Effective only when Enhanced MPS is supported. Disabled by default.
+
+- ``txq_max_inline_len`` parameter [int]
+
+ Maximum size of packet to be inlined. This limits the size of packet to
+ be inlined. If the size of a packet is larger than configured value, the
+ packet isn't inlined even though there's enough space remained in the
+ descriptor. Instead, the packet is included with pointer.
+
+ Effective only when Enhanced MPS is supported. The default value is 256.
+
+- ``tso`` parameter [int]
+
+ A nonzero value enables hardware TSO.
+ When hardware TSO is enabled, packets marked with TCP segmentation
+ offload will be divided into segments by the hardware.
+
+ Disabled by default.
Prerequisites
-------------
- **libmlx5**
- Low-level user space driver library for Mellanox ConnectX-4 devices,
- it is automatically loaded by libibverbs.
+ Low-level user space driver library for Mellanox ConnectX-4/ConnectX-5
+ devices, it is automatically loaded by libibverbs.
This library basically implements send/receive calls to the hardware
queues.
Unlike most other PMDs, these modules must remain loaded and bound to
their devices:
- - mlx5_core: hardware driver managing Mellanox ConnectX-4 devices and
- related Ethernet kernel network devices.
+ - mlx5_core: hardware driver managing Mellanox ConnectX-4/ConnectX-5
+ devices and related Ethernet kernel network devices.
- mlx5_ib: InifiniBand device driver.
- ib_uverbs: user space driver for Verbs (entry point for libibverbs).
- **Firmware update**
- Mellanox OFED releases include firmware updates for ConnectX-4 adapters.
+ Mellanox OFED releases include firmware updates for ConnectX-4/ConnectX-5
+ adapters.
Because each release provides new features, these updates must be applied to
match the kernel modules and libraries they come with.
Currently supported by DPDK:
-- Mellanox OFED **3.4-1.0.0.0**.
-
+- Mellanox OFED version: **4.0-2.0.0.0**
- firmware version:
- - ConnectX-4: **12.17.1010**
- - ConnectX-4 Lx: **14.17.1010**
+ - ConnectX-4: **12.18.2000**
+ - ConnectX-4 Lx: **14.18.2000**
+ - ConnectX-5: **16.19.1200**
+ - ConnectX-5 Ex: **16.19.1200**
Getting Mellanox OFED
~~~~~~~~~~~~~~~~~~~~~
this DPDK release was developed and tested against is strongly
recommended. Please check the `prerequisites`_.
+Supported NICs
+--------------
+
+* Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+* Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+* Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+* Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+* Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT (1x40G)
+* Mellanox(R) ConnectX(R)-4 40G MCX413A-BCAT (1x40G)
+* Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+* Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT (1x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX413A-GCAT (1x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX416A-BCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX416A-GCAT (2x50G)
+* Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+* Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+* Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+* Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+* Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+* Mellanox(R) ConnectX(R)-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
Notes for testpmd
-----------------
Usage example
-------------
-This section demonstrates how to launch **testpmd** with Mellanox ConnectX-4
-devices managed by librte_pmd_mlx5.
+This section demonstrates how to launch **testpmd** with Mellanox
+ConnectX-4/ConnectX-5 devices managed by librte_pmd_mlx5.
#. Load the kernel modules:
.. code-block:: console
- testpmd -c 0xff00 -n 4 -w 05:00.0 -w 05:00.1 -w 06:00.0 -w 06:00.1 -- --rxq=2 --txq=2 -i
+ testpmd -l 8-15 -n 4 -w 05:00.0 -w 05:00.1 -w 06:00.0 -w 06:00.1 -- --rxq=2 --txq=2 -i
Example output:
Code Review / deb_dpdk.git / blobdiff