========================================
The SFC EFX PMD (**librte_pmd_sfc_efx**) provides poll mode driver support
-for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters.
+for **Solarflare SFN7xxx and SFN8xxx** family of 10/40 Gbps adapters and
+**Solarflare XtremeScale X2xxx** family of 10/25/40/50/100 Gbps adapters.
SFC EFX PMD has support for the latest Linux and FreeBSD operating systems.
More information can be found at `Solarflare Communications website
- Flow API
+- Loopback
+
Non-supported Features
----------------------
- Priority-based flow control
-- Loopback
-
- Configurable RX CRC stripping (always stripped)
- Header split on receive
It should be taken into account when mbuf pool for receive is created.
+Equal stride super-buffer mode
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+When the receive queue uses equal stride super-buffer DMA mode, one HW Rx
+descriptor carries many Rx buffers which contiguously follow each other
+with some stride (equal to total size of rte_mbuf as mempool object).
+Each Rx buffer is an independent rte_mbuf.
+However dedicated mempool manager must be used when mempool for the Rx
+queue is created. The manager must support dequeue of the contiguous
+block of objects and provide mempool info API to get the block size.
+
+Another limitation of a equal stride super-buffer mode, imposed by the
+firmware, is that it allows for a single RSS context.
+
+
Tunnels support
---------------
-NVGRE, VXLAN and GENEVE tunnels are supported on SFN8xxx family adapters
-with full-feature firmware variant running.
+NVGRE, VXLAN and GENEVE tunnels are supported on SFN8xxx and X2xxx family
+adapters with full-feature firmware variant running.
**sfboot** should be used to configure NIC to run full-feature firmware variant.
See Solarflare Server Adapter User's Guide for details.
-SFN8xxx family adapters provide either inner or outer packet classes.
+SFN8xxx and X2xxx family adapters provide either inner or outer packet classes.
If adapter firmware advertises support for tunnels then the PMD
configures the hardware to report inner classes, and outer classes are
not reported in received packets.
However, for VXLAN and GENEVE tunnels the PMD does report UDP as the
outer layer 4 packet type.
-SFN8xxx family adapters report GENEVE packets as VXLAN.
+SFN8xxx and X2xxx family adapters report GENEVE packets as VXLAN.
If UDP ports are configured for only one tunnel type then it is safe to
treat VXLAN packet type indication as the corresponding UDP tunnel type.
- VOID
- ETH (exact match of source/destination addresses, individual/group match
- of destination address, EtherType)
+ of destination address, EtherType in the outer frame and exact match of
+ destination addresses, individual/group match of destination address in
+ the inner frame)
- VLAN (exact match of VID, double-tagging is supported)
- UDP (exact match of source/destination ports)
+- VXLAN (exact match of VXLAN network identifier)
+
+- GENEVE (exact match of virtual network identifier, only Ethernet (0x6558)
+ protocol type is supported)
+
+- NVGRE (exact match of virtual subnet ID)
+
Supported actions:
- VOID
- RSS
+- DROP
+
+- FLAG (supported only with ef10_essb Rx datapath)
+
+- MARK (supported only with ef10_essb Rx datapath)
+
Validating flow rules depends on the firmware variant.
Ethernet destinaton individual/group match
multicast, it matches all multicast (and broadcast) packets, oherwise it
matches unicast packets that are not filtered by other flow rules.
+Exceptions to flow rules
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+There is a list of exceptional flow rule patterns which will not be
+accepted by the PMD. A pattern will be rejected if at least one of the
+conditions is met:
+
+- Filtering by IPv4 or IPv6 EtherType without pattern items of internet
+ layer and above.
+
+- The last item is IPV4 or IPV6, and it's empty.
+
+- Filtering by TCP or UDP IP transport protocol without pattern items of
+ transport layer and above.
+
+- The last item is TCP or UDP, and it's empty.
+
Supported NICs
--------------
+- Solarflare XtremeScale Adapters:
+
+ - Solarflare X2522 Dual Port SFP28 10/25GbE Adapter
+
- Solarflare Flareon [Ultra] Server Adapters:
- Solarflare SFN8522 Dual Port SFP+ Server Adapter
Case-insensitive 1/y/yes/on or 0/n/no/off may be used to specify
boolean parameters value.
-- ``rx_datapath`` [auto|efx|ef10] (default **auto**)
+- ``rx_datapath`` [auto|efx|ef10|ef10_esps] (default **auto**)
Choose receive datapath implementation.
**auto** allows the driver itself to make a choice based on firmware
features available and required by the datapath implementation.
**efx** chooses libefx-based datapath which supports Rx scatter.
- **ef10** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which is
+ **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
more efficient than libefx-based and provides richer packet type
classification, but lacks Rx scatter support.
+ **ef10_esps** chooses SFNX2xxx equal stride packed stream datapath
+ which may be used on DPDK firmware variant only
+ (see notes about its limitations above).
- ``tx_datapath`` [auto|efx|ef10|ef10_simple] (default **auto**)
(full-feature firmware variant only), TSO and multi-segment mbufs.
Mbuf segments may come from different mempools, and mbuf reference
counters are treated responsibly.
- **ef10** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which is
+ **ef10** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which is
more efficient than libefx-based but has no VLAN insertion and TSO
support yet.
Mbuf segments may come from different mempools, and mbuf reference
counters are treated responsibly.
- **ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx) native datapath which
+ **ef10_simple** chooses EF10 (SFN7xxx, SFN8xxx, X2xxx) native datapath which
is even more faster then **ef10** but does not support multi-segment
mbufs, disallows multiple mempools and neglects mbuf reference counters.
**auto** allows NIC firmware to make a choice based on
installed licences and firmware variant configured using **sfboot**.
-- ``debug_init`` [bool] (default **n**)
-
- Enable extra logging during device initialization and startup.
-
-- ``mcdi_logging`` [bool] (default **n**)
-
- Enable extra logging of the communication with the NIC's management CPU.
- The logging is done using RTE_LOG() with INFO level and PMD type.
- The format is consumed by the Solarflare netlogdecode cross-platform tool.
-
- ``stats_update_period_ms`` [long] (default **1000**)
Adjust period in milliseconds to update port hardware statistics.
The accepted range is 0 to 65535. The value of **0** may be used
to disable periodic statistics update. One should note that it's
- only possible to set an arbitrary value on SFN8xxx provided that
+ only possible to set an arbitrary value on SFN8xxx and X2xxx provided that
firmware version is 6.2.1.1033 or higher, otherwise any positive
value will select a fixed update period of **1000** milliseconds
+
+- ``fw_variant`` [dont-care|full-feature|ultra-low-latency|
+ capture-packed-stream|dpdk] (default **dont-care**)
+
+ Choose the preferred firmware variant to use. In order for the selected
+ option to have an effect, the **sfboot** utility must be configured with the
+ **auto** firmware-variant option. The preferred firmware variant applies to
+ all ports on the NIC.
+ **dont-care** ensures that the driver can attach to an unprivileged function.
+ The datapath firmware type to use is controlled by the **sfboot**
+ utility.
+ **full-feature** chooses full featured firmware.
+ **ultra-low-latency** chooses firmware with fewer features but lower latency.
+ **capture-packed-stream** chooses firmware for SolarCapture packed stream
+ mode.
+ **dpdk** chooses DPDK firmware with equal stride super-buffer Rx mode
+ for higher Rx packet rate and packet marks support and firmware subvariant
+ without checksumming on transmit for higher Tx packet rate if
+ checksumming is not required.
+
+- ``rxd_wait_timeout_ns`` [long] (default **200 us**)
+
+ Adjust timeout in nanoseconds to head-of-line block to wait for
+ Rx descriptors.
+ The accepted range is 0 to 400 ms.
+ Flow control should be enabled to make it work.
+ The value of **0** disables it and packets are dropped immediately.
+ When a packet is dropped because of no Rx descriptors,
+ ``rx_nodesc_drop_cnt`` counter grows.
+ The feature is supported only by the DPDK firmware variant when equal
+ stride super-buffer Rx mode is used.
+
+
+Dynamic Logging Parameters
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+One may leverage EAL option "--log-level" to change default levels
+for the log types supported by the driver. The option is used with
+an argument typically consisting of two parts separated by a colon.
+
+Level value is the last part which takes a symbolic name (or integer).
+Log type is the former part which may shell match syntax.
+Depending on the choice of the expression, the given log level may
+be used either for some specific log type or for a subset of types.
+
+SFC EFX PMD provides the following log types available for control:
+
+- ``pmd.net.sfc.driver`` (default level is **notice**)
+
+ Affects driver-wide messages unrelated to any particular devices.
+
+- ``pmd.net.sfc.main`` (default level is **notice**)
+
+ Matches a subset of per-port log types registered during runtime.
+ A full name for a particular type may be obtained by appending a
+ dot and a PCI device identifier (``XXXX:XX:XX.X``) to the prefix.
+
+- ``pmd.net.sfc.mcdi`` (default level is **notice**)
+
+ Extra logging of the communication with the NIC's management CPU.
+ The format of the log is consumed by the Solarflare netlogdecode
+ cross-platform tool. May be managed per-port, as explained above.
Code Review / deb_dpdk.git / blobdiff