--- /dev/null
+.. BSD LICENSE
+ Copyright 2015 - 2016 CESNET
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of CESNET nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+SZEDATA2 poll mode driver library
+=================================
+
+The SZEDATA2 poll mode driver library implements support for cards from COMBO
+family (**COMBO-80G**, **COMBO-100G**).
+The SZEDATA2 PMD uses interface provided by libsze2 library to communicate
+with COMBO cards over sze2 layer.
+
+More information about family of
+`COMBO cards <https://www.liberouter.org/technologies/cards/>`_
+and used technology
+(`NetCOPE platform <https://www.liberouter.org/technologies/netcope/>`_) can be
+found on the `Liberouter website <https://www.liberouter.org/>`_.
+
+.. note::
+
+ This driver has external dependencies.
+ Therefore it is disabled in default configuration files.
+ It can be enabled by setting ``CONFIG_RTE_LIBRTE_PMD_SZEDATA2=y``
+ and recompiling.
+
+.. note::
+
+ Currently the driver is supported only on x86_64 architectures.
+ Only x86_64 versions of the external libraries are provided.
+
+Prerequisites
+-------------
+
+This PMD requires kernel modules which are responsible for initialization and
+allocation of resources needed for sze2 layer function.
+Communication between PMD and kernel modules is mediated by libsze2 library.
+These kernel modules and library are not part of DPDK and must be installed
+separately:
+
+* **libsze2 library**
+
+ The library provides API for initialization of sze2 transfers, receiving and
+ transmitting data segments.
+
+* **Kernel modules**
+
+ * combov3
+ * szedata2_cv3
+
+ Kernel modules manage initialization of hardware, allocation and
+ sharing of resources for user space applications.
+
+Information about getting the dependencies can be found `here
+<https://www.liberouter.org/technologies/netcope/access-to-libsze2-library/>`_.
+
+Configuration
+-------------
+
+These configuration options can be modified before compilation in the
+``.config`` file:
+
+* ``CONFIG_RTE_LIBRTE_PMD_SZEDATA2`` default value: **n**
+
+ Value **y** enables compilation of szedata2 PMD.
+
+* ``CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS`` default value: **0**
+
+ This option defines type of firmware address space.
+ Currently supported value is:
+
+ * **0** for firmwares:
+
+ * NIC_100G1_LR4
+ * HANIC_100G1_LR4
+ * HANIC_100G1_SR10
+
+Using the SZEDATA2 PMD
+----------------------
+
+From DPDK version 16.04 the type of SZEDATA2 PMD is changed to PMD_PDEV.
+SZEDATA2 device is automatically recognized during EAL initialization.
+No special command line options are needed.
+
+Kernel modules have to be loaded before running the DPDK application.
+
+Example of usage
+----------------
+
+Read packets from 0. and 1. receive channel and write them to 0. and 1.
+transmit channel:
+
+.. code-block:: console
+
+ $RTE_TARGET/app/testpmd -c 0xf -n 2 \
+ -- --port-topology=chained --rxq=2 --txq=2 --nb-cores=2 -i -a
+
+Example output:
+
+.. code-block:: console
+
+ [...]
+ EAL: PCI device 0000:06:00.0 on NUMA socket -1
+ EAL: probe driver: 1b26:c1c1 rte_szedata2_pmd
+ PMD: Initializing szedata2 device (0000:06:00.0)
+ PMD: SZEDATA2 path: /dev/szedataII0
+ PMD: Available DMA channels RX: 8 TX: 8
+ PMD: resource0 phys_addr = 0xe8000000 len = 134217728 virt addr = 7f48f8000000
+ PMD: szedata2 device (0000:06:00.0) successfully initialized
+ Interactive-mode selected
+ Auto-start selected
+ Configuring Port 0 (socket 0)
+ Port 0: 00:11:17:00:00:00
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Done
+ Start automatic packet forwarding
+ io packet forwarding - CRC stripping disabled - packets/burst=32
+ nb forwarding cores=2 - nb forwarding ports=1
+ RX queues=2 - RX desc=128 - RX free threshold=0
+ RX threshold registers: pthresh=0 hthresh=0 wthresh=0
+ TX queues=2 - TX desc=512 - TX free threshold=0
+ TX threshold registers: pthresh=0 hthresh=0 wthresh=0
+ TX RS bit threshold=0 - TXQ flags=0x0
+ testpmd>
Code Review / deb_dpdk.git / blobdiff