--- /dev/null
+.. BSD LICENSE
+ Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+.. _Environment_Abstraction_Layer:
+
+Environment Abstraction Layer
+=============================
+
+The Environment Abstraction Layer (EAL) is responsible for gaining access to low-level resources such as hardware and memory space.
+It provides a generic interface that hides the environment specifics from the applications and libraries.
+It is the responsibility of the initialization routine to decide how to allocate these resources
+(that is, memory space, PCI devices, timers, consoles, and so on).
+
+Typical services expected from the EAL are:
+
+* DPDK Loading and Launching:
+ The DPDK and its application are linked as a single application and must be loaded by some means.
+
+* Core Affinity/Assignment Procedures:
+ The EAL provides mechanisms for assigning execution units to specific cores as well as creating execution instances.
+
+* System Memory Reservation:
+ The EAL facilitates the reservation of different memory zones, for example, physical memory areas for device interactions.
+
+* PCI Address Abstraction: The EAL provides an interface to access PCI address space.
+
+* Trace and Debug Functions: Logs, dump_stack, panic and so on.
+
+* Utility Functions: Spinlocks and atomic counters that are not provided in libc.
+
+* CPU Feature Identification: Determine at runtime if a particular feature, for example, Intel® AVX is supported.
+ Determine if the current CPU supports the feature set that the binary was compiled for.
+
+* Interrupt Handling: Interfaces to register/unregister callbacks to specific interrupt sources.
+
+* Alarm Functions: Interfaces to set/remove callbacks to be run at a specific time.
+
+EAL in a Linux-userland Execution Environment
+---------------------------------------------
+
+In a Linux user space environment, the DPDK application runs as a user-space application using the pthread library.
+PCI information about devices and address space is discovered through the /sys kernel interface and through kernel modules such as uio_pci_generic, or igb_uio.
+Refer to the UIO: User-space drivers documentation in the Linux kernel. This memory is mmap'd in the application.
+
+The EAL performs physical memory allocation using mmap() in hugetlbfs (using huge page sizes to increase performance).
+This memory is exposed to DPDK service layers such as the :ref:`Mempool Library <Mempool_Library>`.
+
+At this point, the DPDK services layer will be initialized, then through pthread setaffinity calls,
+each execution unit will be assigned to a specific logical core to run as a user-level thread.
+
+The time reference is provided by the CPU Time-Stamp Counter (TSC) or by the HPET kernel API through a mmap() call.
+
+Initialization and Core Launching
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Part of the initialization is done by the start function of glibc.
+A check is also performed at initialization time to ensure that the micro architecture type chosen in the config file is supported by the CPU.
+Then, the main() function is called. The core initialization and launch is done in rte_eal_init() (see the API documentation).
+It consist of calls to the pthread library (more specifically, pthread_self(), pthread_create(), and pthread_setaffinity_np()).
+
+.. _figure_linuxapp_launch:
+
+.. figure:: img/linuxapp_launch.*
+
+ EAL Initialization in a Linux Application Environment
+
+
+.. note::
+
+ Initialization of objects, such as memory zones, rings, memory pools, lpm tables and hash tables,
+ should be done as part of the overall application initialization on the master lcore.
+ The creation and initialization functions for these objects are not multi-thread safe.
+ However, once initialized, the objects themselves can safely be used in multiple threads simultaneously.
+
+Multi-process Support
+~~~~~~~~~~~~~~~~~~~~~
+
+The Linuxapp EAL allows a multi-process as well as a multi-threaded (pthread) deployment model.
+See chapter
+:ref:`Multi-process Support <Multi-process_Support>` for more details.
+
+Memory Mapping Discovery and Memory Reservation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The allocation of large contiguous physical memory is done using the hugetlbfs kernel filesystem.
+The EAL provides an API to reserve named memory zones in this contiguous memory.
+The physical address of the reserved memory for that memory zone is also returned to the user by the memory zone reservation API.
+
+.. note::
+
+ Memory reservations done using the APIs provided by rte_malloc are also backed by pages from the hugetlbfs filesystem.
+
+Xen Dom0 support without hugetbls
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The existing memory management implementation is based on the Linux kernel hugepage mechanism.
+However, Xen Dom0 does not support hugepages, so a new Linux kernel module rte_dom0_mm is added to workaround this limitation.
+
+The EAL uses IOCTL interface to notify the Linux kernel module rte_dom0_mm to allocate memory of specified size,
+and get all memory segments information from the module,
+and the EAL uses MMAP interface to map the allocated memory.
+For each memory segment, the physical addresses are contiguous within it but actual hardware addresses are contiguous within 2MB.
+
+PCI Access
+~~~~~~~~~~
+
+The EAL uses the /sys/bus/pci utilities provided by the kernel to scan the content on the PCI bus.
+To access PCI memory, a kernel module called uio_pci_generic provides a /dev/uioX device file
+and resource files in /sys
+that can be mmap'd to obtain access to PCI address space from the application.
+The DPDK-specific igb_uio module can also be used for this. Both drivers use the uio kernel feature (userland driver).
+
+Per-lcore and Shared Variables
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+.. note::
+
+ lcore refers to a logical execution unit of the processor, sometimes called a hardware *thread*.
+
+Shared variables are the default behavior.
+Per-lcore variables are implemented using *Thread Local Storage* (TLS) to provide per-thread local storage.
+
+Logs
+~~~~
+
+A logging API is provided by EAL.
+By default, in a Linux application, logs are sent to syslog and also to the console.
+However, the log function can be overridden by the user to use a different logging mechanism.
+
+Trace and Debug Functions
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+There are some debug functions to dump the stack in glibc.
+The rte_panic() function can voluntarily provoke a SIG_ABORT,
+which can trigger the generation of a core file, readable by gdb.
+
+CPU Feature Identification
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The EAL can query the CPU at runtime (using the rte_cpu_get_feature() function) to determine which CPU features are available.
+
+User Space Interrupt Event
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
++ User Space Interrupt and Alarm Handling in Host Thread
+
+The EAL creates a host thread to poll the UIO device file descriptors to detect the interrupts.
+Callbacks can be registered or unregistered by the EAL functions for a specific interrupt event
+and are called in the host thread asynchronously.
+The EAL also allows timed callbacks to be used in the same way as for NIC interrupts.
+
+.. note::
+
+ In DPDK PMD, the only interrupts handled by the dedicated host thread are those for link status change,
+ i.e. link up and link down notification.
+
+
++ RX Interrupt Event
+
+The receive and transmit routines provided by each PMD don't limit themselves to execute in polling thread mode.
+To ease the idle polling with tiny throughput, it's useful to pause the polling and wait until the wake-up event happens.
+The RX interrupt is the first choice to be such kind of wake-up event, but probably won't be the only one.
+
+EAL provides the event APIs for this event-driven thread mode.
+Taking linuxapp as an example, the implementation relies on epoll. Each thread can monitor an epoll instance
+in which all the wake-up events' file descriptors are added. The event file descriptors are created and mapped to
+the interrupt vectors according to the UIO/VFIO spec.
+From bsdapp's perspective, kqueue is the alternative way, but not implemented yet.
+
+EAL initializes the mapping between event file descriptors and interrupt vectors, while each device initializes the mapping
+between interrupt vectors and queues. In this way, EAL actually is unaware of the interrupt cause on the specific vector.
+The eth_dev driver takes responsibility to program the latter mapping.
+
+.. note::
+
+ Per queue RX interrupt event is only allowed in VFIO which supports multiple MSI-X vector. In UIO, the RX interrupt
+ together with other interrupt causes shares the same vector. In this case, when RX interrupt and LSC(link status change)
+ interrupt are both enabled(intr_conf.lsc == 1 && intr_conf.rxq == 1), only the former is capable.
+
+The RX interrupt are controlled/enabled/disabled by ethdev APIs - 'rte_eth_dev_rx_intr_*'. They return failure if the PMD
+hasn't support them yet. The intr_conf.rxq flag is used to turn on the capability of RX interrupt per device.
+
+Blacklisting
+~~~~~~~~~~~~
+
+The EAL PCI device blacklist functionality can be used to mark certain NIC ports as blacklisted,
+so they are ignored by the DPDK.
+The ports to be blacklisted are identified using the PCIe* description (Domain:Bus:Device.Function).
+
+Misc Functions
+~~~~~~~~~~~~~~
+
+Locks and atomic operations are per-architecture (i686 and x86_64).
+
+Memory Segments and Memory Zones (memzone)
+------------------------------------------
+
+The mapping of physical memory is provided by this feature in the EAL.
+As physical memory can have gaps, the memory is described in a table of descriptors,
+and each descriptor (called rte_memseg ) describes a contiguous portion of memory.
+
+On top of this, the memzone allocator's role is to reserve contiguous portions of physical memory.
+These zones are identified by a unique name when the memory is reserved.
+
+The rte_memzone descriptors are also located in the configuration structure.
+This structure is accessed using rte_eal_get_configuration().
+The lookup (by name) of a memory zone returns a descriptor containing the physical address of the memory zone.
+
+Memory zones can be reserved with specific start address alignment by supplying the align parameter
+(by default, they are aligned to cache line size).
+The alignment value should be a power of two and not less than the cache line size (64 bytes).
+Memory zones can also be reserved from either 2 MB or 1 GB hugepages, provided that both are available on the system.
+
+
+Multiple pthread
+----------------
+
+DPDK usually pins one pthread per core to avoid the overhead of task switching.
+This allows for significant performance gains, but lacks flexibility and is not always efficient.
+
+Power management helps to improve the CPU efficiency by limiting the CPU runtime frequency.
+However, alternately it is possible to utilize the idle cycles available to take advantage of
+the full capability of the CPU.
+
+By taking advantage of cgroup, the CPU utilization quota can be simply assigned.
+This gives another way to improve the CPU efficiency, however, there is a prerequisite;
+DPDK must handle the context switching between multiple pthreads per core.
+
+For further flexibility, it is useful to set pthread affinity not only to a CPU but to a CPU set.
+
+EAL pthread and lcore Affinity
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The term "lcore" refers to an EAL thread, which is really a Linux/FreeBSD pthread.
+"EAL pthreads" are created and managed by EAL and execute the tasks issued by *remote_launch*.
+In each EAL pthread, there is a TLS (Thread Local Storage) called *_lcore_id* for unique identification.
+As EAL pthreads usually bind 1:1 to the physical CPU, the *_lcore_id* is typically equal to the CPU ID.
+
+When using multiple pthreads, however, the binding is no longer always 1:1 between an EAL pthread and a specified physical CPU.
+The EAL pthread may have affinity to a CPU set, and as such the *_lcore_id* will not be the same as the CPU ID.
+For this reason, there is an EAL long option '--lcores' defined to assign the CPU affinity of lcores.
+For a specified lcore ID or ID group, the option allows setting the CPU set for that EAL pthread.
+
+The format pattern:
+ --lcores='<lcore_set>[@cpu_set][,<lcore_set>[@cpu_set],...]'
+
+'lcore_set' and 'cpu_set' can be a single number, range or a group.
+
+A number is a "digit([0-9]+)"; a range is "<number>-<number>"; a group is "(<number|range>[,<number|range>,...])".
+
+If a '\@cpu_set' value is not supplied, the value of 'cpu_set' will default to the value of 'lcore_set'.
+
+ ::
+
+ For example, "--lcores='1,2@(5-7),(3-5)@(0,2),(0,6),7-8'" which means start 9 EAL thread;
+ lcore 0 runs on cpuset 0x41 (cpu 0,6);
+ lcore 1 runs on cpuset 0x2 (cpu 1);
+ lcore 2 runs on cpuset 0xe0 (cpu 5,6,7);
+ lcore 3,4,5 runs on cpuset 0x5 (cpu 0,2);
+ lcore 6 runs on cpuset 0x41 (cpu 0,6);
+ lcore 7 runs on cpuset 0x80 (cpu 7);
+ lcore 8 runs on cpuset 0x100 (cpu 8).
+
+Using this option, for each given lcore ID, the associated CPUs can be assigned.
+It's also compatible with the pattern of corelist('-l') option.
+
+non-EAL pthread support
+~~~~~~~~~~~~~~~~~~~~~~~
+
+It is possible to use the DPDK execution context with any user pthread (aka. Non-EAL pthreads).
+In a non-EAL pthread, the *_lcore_id* is always LCORE_ID_ANY which identifies that it is not an EAL thread with a valid, unique, *_lcore_id*.
+Some libraries will use an alternative unique ID (e.g. TID), some will not be impacted at all, and some will work but with limitations (e.g. timer and mempool libraries).
+
+All these impacts are mentioned in :ref:`known_issue_label` section.
+
+Public Thread API
+~~~~~~~~~~~~~~~~~
+
+There are two public APIs ``rte_thread_set_affinity()`` and ``rte_pthread_get_affinity()`` introduced for threads.
+When they're used in any pthread context, the Thread Local Storage(TLS) will be set/get.
+
+Those TLS include *_cpuset* and *_socket_id*:
+
+* *_cpuset* stores the CPUs bitmap to which the pthread is affinitized.
+
+* *_socket_id* stores the NUMA node of the CPU set. If the CPUs in CPU set belong to different NUMA node, the *_socket_id* will be set to SOCKET_ID_ANY.
+
+
+.. _known_issue_label:
+
+Known Issues
+~~~~~~~~~~~~
+
++ rte_mempool
+
+ The rte_mempool uses a per-lcore cache inside the mempool.
+ For non-EAL pthreads, ``rte_lcore_id()`` will not return a valid number.
+ So for now, when rte_mempool is used with non-EAL pthreads, the put/get operations will bypass the mempool cache and there is a performance penalty because of this bypass.
+ Support for non-EAL mempool cache is currently being enabled.
+
++ rte_ring
+
+ rte_ring supports multi-producer enqueue and multi-consumer dequeue.
+ However, it is non-preemptive, this has a knock on effect of making rte_mempool non-preemptable.
+
+ .. note::
+
+ The "non-preemptive" constraint means:
+
+ - a pthread doing multi-producers enqueues on a given ring must not
+ be preempted by another pthread doing a multi-producer enqueue on
+ the same ring.
+ - a pthread doing multi-consumers dequeues on a given ring must not
+ be preempted by another pthread doing a multi-consumer dequeue on
+ the same ring.
+
+ Bypassing this constraint it may cause the 2nd pthread to spin until the 1st one is scheduled again.
+ Moreover, if the 1st pthread is preempted by a context that has an higher priority, it may even cause a dead lock.
+
+ This does not mean it cannot be used, simply, there is a need to narrow down the situation when it is used by multi-pthread on the same core.
+
+ 1. It CAN be used for any single-producer or single-consumer situation.
+
+ 2. It MAY be used by multi-producer/consumer pthread whose scheduling policy are all SCHED_OTHER(cfs). User SHOULD be aware of the performance penalty before using it.
+
+ 3. It MUST not be used by multi-producer/consumer pthreads, whose scheduling policies are SCHED_FIFO or SCHED_RR.
+
+ ``RTE_RING_PAUSE_REP_COUNT`` is defined for rte_ring to reduce contention. It's mainly for case 2, a yield is issued after number of times pause repeat.
+
+ It adds a sched_yield() syscall if the thread spins for too long while waiting on the other thread to finish its operations on the ring.
+ This gives the preempted thread a chance to proceed and finish with the ring enqueue/dequeue operation.
+
++ rte_timer
+
+ Running ``rte_timer_manager()`` on a non-EAL pthread is not allowed. However, resetting/stopping the timer from a non-EAL pthread is allowed.
+
++ rte_log
+
+ In non-EAL pthreads, there is no per thread loglevel and logtype, global loglevels are used.
+
++ misc
+
+ The debug statistics of rte_ring, rte_mempool and rte_timer are not supported in a non-EAL pthread.
+
+cgroup control
+~~~~~~~~~~~~~~
+
+The following is a simple example of cgroup control usage, there are two pthreads(t0 and t1) doing packet I/O on the same core ($CPU).
+We expect only 50% of CPU spend on packet IO.
+
+ .. code-block:: console
+
+ mkdir /sys/fs/cgroup/cpu/pkt_io
+ mkdir /sys/fs/cgroup/cpuset/pkt_io
+
+ echo $cpu > /sys/fs/cgroup/cpuset/cpuset.cpus
+
+ echo $t0 > /sys/fs/cgroup/cpu/pkt_io/tasks
+ echo $t0 > /sys/fs/cgroup/cpuset/pkt_io/tasks
+
+ echo $t1 > /sys/fs/cgroup/cpu/pkt_io/tasks
+ echo $t1 > /sys/fs/cgroup/cpuset/pkt_io/tasks
+
+ cd /sys/fs/cgroup/cpu/pkt_io
+ echo 100000 > pkt_io/cpu.cfs_period_us
+ echo 50000 > pkt_io/cpu.cfs_quota_us
+
+
+Malloc
+------
+
+The EAL provides a malloc API to allocate any-sized memory.
+
+The objective of this API is to provide malloc-like functions to allow
+allocation from hugepage memory and to facilitate application porting.
+The *DPDK API Reference* manual describes the available functions.
+
+Typically, these kinds of allocations should not be done in data plane
+processing because they are slower than pool-based allocation and make
+use of locks within the allocation and free paths.
+However, they can be used in configuration code.
+
+Refer to the rte_malloc() function description in the *DPDK API Reference*
+manual for more information.
+
+Cookies
+~~~~~~~
+
+When CONFIG_RTE_MALLOC_DEBUG is enabled, the allocated memory contains
+overwrite protection fields to help identify buffer overflows.
+
+Alignment and NUMA Constraints
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The rte_malloc() takes an align argument that can be used to request a memory
+area that is aligned on a multiple of this value (which must be a power of two).
+
+On systems with NUMA support, a call to the rte_malloc() function will return
+memory that has been allocated on the NUMA socket of the core which made the call.
+A set of APIs is also provided, to allow memory to be explicitly allocated on a
+NUMA socket directly, or by allocated on the NUMA socket where another core is
+located, in the case where the memory is to be used by a logical core other than
+on the one doing the memory allocation.
+
+Use Cases
+~~~~~~~~~
+
+This API is meant to be used by an application that requires malloc-like
+functions at initialization time.
+
+For allocating/freeing data at runtime, in the fast-path of an application,
+the memory pool library should be used instead.
+
+Internal Implementation
+~~~~~~~~~~~~~~~~~~~~~~~
+
+Data Structures
+^^^^^^^^^^^^^^^
+
+There are two data structure types used internally in the malloc library:
+
+* struct malloc_heap - used to track free space on a per-socket basis
+
+* struct malloc_elem - the basic element of allocation and free-space
+ tracking inside the library.
+
+Structure: malloc_heap
+""""""""""""""""""""""
+
+The malloc_heap structure is used to manage free space on a per-socket basis.
+Internally, there is one heap structure per NUMA node, which allows us to
+allocate memory to a thread based on the NUMA node on which this thread runs.
+While this does not guarantee that the memory will be used on that NUMA node,
+it is no worse than a scheme where the memory is always allocated on a fixed
+or random node.
+
+The key fields of the heap structure and their function are described below
+(see also diagram above):
+
+* lock - the lock field is needed to synchronize access to the heap.
+ Given that the free space in the heap is tracked using a linked list,
+ we need a lock to prevent two threads manipulating the list at the same time.
+
+* free_head - this points to the first element in the list of free nodes for
+ this malloc heap.
+
+.. note::
+
+ The malloc_heap structure does not keep track of in-use blocks of memory,
+ since these are never touched except when they are to be freed again -
+ at which point the pointer to the block is an input to the free() function.
+
+.. _figure_malloc_heap:
+
+.. figure:: img/malloc_heap.*
+
+ Example of a malloc heap and malloc elements within the malloc library
+
+
+.. _malloc_elem:
+
+Structure: malloc_elem
+""""""""""""""""""""""
+
+The malloc_elem structure is used as a generic header structure for various
+blocks of memory.
+It is used in three different ways - all shown in the diagram above:
+
+#. As a header on a block of free or allocated memory - normal case
+
+#. As a padding header inside a block of memory
+
+#. As an end-of-memseg marker
+
+The most important fields in the structure and how they are used are described below.
+
+.. note::
+
+ If the usage of a particular field in one of the above three usages is not
+ described, the field can be assumed to have an undefined value in that
+ situation, for example, for padding headers only the "state" and "pad"
+ fields have valid values.
+
+* heap - this pointer is a reference back to the heap structure from which
+ this block was allocated.
+ It is used for normal memory blocks when they are being freed, to add the
+ newly-freed block to the heap's free-list.
+
+* prev - this pointer points to the header element/block in the memseg
+ immediately behind the current one. When freeing a block, this pointer is
+ used to reference the previous block to check if that block is also free.
+ If so, then the two free blocks are merged to form a single larger block.
+
+* next_free - this pointer is used to chain the free-list of unallocated
+ memory blocks together.
+ It is only used in normal memory blocks; on ``malloc()`` to find a suitable
+ free block to allocate and on ``free()`` to add the newly freed element to
+ the free-list.
+
+* state - This field can have one of three values: ``FREE``, ``BUSY`` or
+ ``PAD``.
+ The former two are to indicate the allocation state of a normal memory block
+ and the latter is to indicate that the element structure is a dummy structure
+ at the end of the start-of-block padding, i.e. where the start of the data
+ within a block is not at the start of the block itself, due to alignment
+ constraints.
+ In that case, the pad header is used to locate the actual malloc element
+ header for the block.
+ For the end-of-memseg structure, this is always a ``BUSY`` value, which
+ ensures that no element, on being freed, searches beyond the end of the
+ memseg for other blocks to merge with into a larger free area.
+
+* pad - this holds the length of the padding present at the start of the block.
+ In the case of a normal block header, it is added to the address of the end
+ of the header to give the address of the start of the data area, i.e. the
+ value passed back to the application on a malloc.
+ Within a dummy header inside the padding, this same value is stored, and is
+ subtracted from the address of the dummy header to yield the address of the
+ actual block header.
+
+* size - the size of the data block, including the header itself.
+ For end-of-memseg structures, this size is given as zero, though it is never
+ actually checked.
+ For normal blocks which are being freed, this size value is used in place of
+ a "next" pointer to identify the location of the next block of memory that
+ in the case of being ``FREE``, the two free blocks can be merged into one.
+
+Memory Allocation
+^^^^^^^^^^^^^^^^^
+
+On EAL initialization, all memsegs are setup as part of the malloc heap.
+This setup involves placing a dummy structure at the end with ``BUSY`` state,
+which may contain a sentinel value if ``CONFIG_RTE_MALLOC_DEBUG`` is enabled,
+and a proper :ref:`element header<malloc_elem>` with ``FREE`` at the start
+for each memseg.
+The ``FREE`` element is then added to the ``free_list`` for the malloc heap.
+
+When an application makes a call to a malloc-like function, the malloc function
+will first index the ``lcore_config`` structure for the calling thread, and
+determine the NUMA node of that thread.
+The NUMA node is used to index the array of ``malloc_heap`` structures which is
+passed as a parameter to the ``heap_alloc()`` function, along with the
+requested size, type, alignment and boundary parameters.
+
+The ``heap_alloc()`` function will scan the free_list of the heap, and attempt
+to find a free block suitable for storing data of the requested size, with the
+requested alignment and boundary constraints.
+
+When a suitable free element has been identified, the pointer to be returned
+to the user is calculated.
+The cache-line of memory immediately preceding this pointer is filled with a
+struct malloc_elem header.
+Because of alignment and boundary constraints, there could be free space at
+the start and/or end of the element, resulting in the following behavior:
+
+#. Check for trailing space.
+ If the trailing space is big enough, i.e. > 128 bytes, then the free element
+ is split.
+ If it is not, then we just ignore it (wasted space).
+
+#. Check for space at the start of the element.
+ If the space at the start is small, i.e. <=128 bytes, then a pad header is
+ used, and the remaining space is wasted.
+ If, however, the remaining space is greater, then the free element is split.
+
+The advantage of allocating the memory from the end of the existing element is
+that no adjustment of the free list needs to take place - the existing element
+on the free list just has its size pointer adjusted, and the following element
+has its "prev" pointer redirected to the newly created element.
+
+Freeing Memory
+^^^^^^^^^^^^^^
+
+To free an area of memory, the pointer to the start of the data area is passed
+to the free function.
+The size of the ``malloc_elem`` structure is subtracted from this pointer to get
+the element header for the block.
+If this header is of type ``PAD`` then the pad length is further subtracted from
+the pointer to get the proper element header for the entire block.
+
+From this element header, we get pointers to the heap from which the block was
+allocated and to where it must be freed, as well as the pointer to the previous
+element, and via the size field, we can calculate the pointer to the next element.
+These next and previous elements are then checked to see if they are also
+``FREE``, and if so, they are merged with the current element.
+This means that we can never have two ``FREE`` memory blocks adjacent to one
+another, as they are always merged into a single block.
Code Review / deb_dpdk.git / blobdiff