+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright 2018 The DPDK contributors
+
ABI and API Deprecation
=======================
Deprecation Notices
-------------------
-* eal: the following functions are deprecated starting from 17.05 and will
- be removed in 17.08:
-
- - ``rte_set_log_level``, replaced by ``rte_log_set_global_level``
- - ``rte_get_log_level``, replaced by ``rte_log_get_global_level``
- - ``rte_set_log_type``, replaced by ``rte_log_set_level``
- - ``rte_get_log_type``, replaced by ``rte_log_get_level``
-
-* devargs: An ABI change is planned for 17.08 for the structure ``rte_devargs``.
- The current version is dependent on bus-specific device identifier, which will
- be made generic and abstracted, in order to make the EAL bus-agnostic.
-
- Accompanying this evolution, device command line parameters will thus support
- explicit bus definition in a device declaration.
-
-* igb_uio: iomem mapping and sysfs files created for iomem and ioport in
- igb_uio will be removed, because we are able to detect these from what Linux
- has exposed, like the way we have done with uio-pci-generic. This change
- targets release 17.05.
-
-* The VDEV subsystem will be converted as driver of the new bus model.
- It may imply some EAL API changes in 17.08.
-
-* The struct ``rte_pci_driver`` is planned to be removed from
- ``rte_cryptodev_driver`` and ``rte_eventdev_driver`` in 17.08.
-
-* ethdev: An API change is planned for 17.08 for the function
- ``_rte_eth_dev_callback_process``. In 17.08 the function will return an ``int``
- instead of ``void`` and a fourth parameter ``void *ret_param`` will be added.
-
-* ethdev: for 17.08 it is planned to deprecate the following nine rte_eth_dev_*
- functions and move them into the ixgbe PMD:
-
- ``rte_eth_dev_bypass_init``, ``rte_eth_dev_bypass_state_set``,
- ``rte_eth_dev_bypass_state_show``, ``rte_eth_dev_bypass_event_store``,
- ``rte_eth_dev_bypass_event_show``, ``rte_eth_dev_wd_timeout_store``,
- ``rte_eth_dev_bypass_wd_timeout_show``, ``rte_eth_dev_bypass_ver_show``,
- ``rte_eth_dev_bypass_wd_reset``.
-
- The following fields will be removed from ``struct eth_dev_ops``:
-
- ``bypass_init_t``, ``bypass_state_set_t``, ``bypass_state_show_t``,
- ``bypass_event_set_t``, ``bypass_event_show_t``, ``bypass_wd_timeout_set_t``,
- ``bypass_wd_timeout_show_t``, ``bypass_ver_show_t``, ``bypass_wd_reset_t``.
-
- The functions will be renamed to the following, and moved to the ``ixgbe`` PMD:
-
- ``rte_pmd_ixgbe_bypass_init``, ``rte_pmd_ixgbe_bypass_state_set``,
- ``rte_pmd_ixgbe_bypass_state_show``, ``rte_pmd_ixgbe_bypass_event_set``,
- ``rte_pmd_ixgbe_bypass_event_show``, ``rte_pmd_ixgbe_bypass_wd_timeout_set``,
- ``rte_pmd_ixgbe_bypass_wd_timeout_show``, ``rte_pmd_ixgbe_bypass_ver_show``,
- ``rte_pmd_ixgbe_bypass_wd_reset``.
-
-* The mbuf flags PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated and
- are respectively replaced by PKT_RX_VLAN_STRIPPED and
- PKT_RX_QINQ_STRIPPED, that are better described. The old flags and
- their behavior will be kept until 17.05 and will be removed in 17.08.
-
-* ethdev: Tx offloads will no longer be enabled by default in 17.08.
- Instead, the ``rte_eth_txmode`` structure will be extended with
- bit field to enable each Tx offload.
- Besides of making the Rx/Tx configuration API more consistent for the
- application, PMDs will be able to provide a better out of the box performance.
- As part of the work, ``ETH_TXQ_FLAGS_NO*`` will be superseded as well.
+* linux: Linux kernel version 3.2 (which is the current minimum required
+ version for the DPDK) is not maintained anymore. Therefore the planned
+ minimum required kernel version for DPDK 19.02 will be the next oldest
+ Long Term Stable (LTS) version which is 3.16, but compatibility for
+ recent distribution kernels will be kept.
+
+* kvargs: The function ``rte_kvargs_process`` will get a new parameter
+ for returning key match count. It will ease handling of no-match case.
+
+* eal: function ``rte_bsf64`` in ``rte_bitmap.h`` has been renamed to
+ ``rte_bsf64_safe`` and moved to ``rte_common.h``. A new ``rte_bsf64`` function
+ will be added in the next release in ``rte_common.h`` that follows convention
+ set by existing ``rte_bsf32`` function.
+
+* eal: both declaring and identifying devices will be streamlined in v18.11.
+ New functions will appear to query a specific port from buses, classes of
+ device and device drivers. Device declaration will be made coherent with the
+ new scheme of device identification.
+ As such, ``rte_devargs`` device representation will change.
+
+ - The enum ``rte_devtype`` was used to identify a bus and will disappear.
+ - Functions previously deprecated will change or disappear:
+
+ + ``rte_eal_devargs_type_count``
+
+* pci: Several exposed functions are misnamed.
+ The following functions are deprecated starting from v17.11 and are replaced:
+
+ - ``eal_parse_pci_BDF`` replaced by ``rte_pci_addr_parse``
+ - ``eal_parse_pci_DomBDF`` replaced by ``rte_pci_addr_parse``
+ - ``rte_eal_compare_pci_addr`` replaced by ``rte_pci_addr_cmp``
+
+* dpaa2: removal of ``rte_dpaa2_memsegs`` structure which has been replaced
+ by a pa-va search library. This structure was earlier being used for holding
+ memory segments used by dpaa2 driver for faster pa->va translation. This
+ structure would be made internal (or removed if all dependencies are cleared)
+ in future releases.
+
+* mbuf: The opaque ``mbuf->hash.sched`` field will be updated to support generic
+ definition in line with the ethdev TM and MTR APIs. Currently, this field
+ is defined in librte_sched in a non-generic way. The new generic format
+ will contain: queue ID, traffic class, color. Field size will not change.
+
+* sched: Some API functions will change prototype due to the above
+ deprecation note for mbuf->hash.sched, e.g. ``rte_sched_port_pkt_write()``
+ and ``rte_sched_port_pkt_read()`` will likely have an additional parameter
+ of type ``struct rte_sched_port``.
+
+* mbuf: the macro ``RTE_MBUF_INDIRECT()`` will be removed in v18.08 or later and
+ replaced with ``RTE_MBUF_CLONED()`` which is already added in v18.05. As
+ ``EXT_ATTACHED_MBUF`` is newly introduced in v18.05, ``RTE_MBUF_INDIRECT()``
+ can no longer be mutually exclusive with ``RTE_MBUF_DIRECT()`` if the new
+ experimental API ``rte_pktmbuf_attach_extbuf()`` is used. Removal of the macro
+ is to fix this semantic inconsistency.
* ethdev: the legacy filter API, including
``rte_eth_dev_filter_supported()``, ``rte_eth_dev_filter_ctrl()`` as well
Target release for removal of the legacy API will be defined once most
PMDs have switched to rte_flow.
-* cryptodev: All PMD names definitions will be moved to the individual PMDs
- in 17.08.
-
-* cryptodev: The following changes will be done in in 17.08:
-
- - the device type enumeration ``rte_cryptodev_type`` will be removed
- - the following structures will be changed: ``rte_cryptodev_session``,
- ``rte_cryptodev_sym_session``, ``rte_cryptodev_info``, ``rte_cryptodev``
- - the function ``rte_cryptodev_count_devtype`` will be replaced by
- ``rte_cryptodev_device_count_by_driver``
-
-* cryptodev: API changes are planned for 17.08 for the sessions management
- to make it agnostic to the underlying devices, removing coupling with
- crypto PMDs, so a single session can be used on multiple devices.
-
- - ``struct rte_cryptodev_sym_session``, dev_id, dev_type will be removed,
- _private field changed to the indirect array of private data pointers of
- all supported devices
-
- An API of followed functions will be changed to allow operate on multiple
- devices with one session:
-
- - ``rte_cryptodev_sym_session_create``
- - ``rte_cryptodev_sym_session_free``
- - ``rte_cryptodev_sym_session_pool_create``
-
- While dev_id will not be stored in the ``struct rte_cryptodev_sym_session``,
- directly, the change of followed API is required:
-
- - ``rte_cryptodev_queue_pair_attach_sym_session``
- - ``rte_cryptodev_queue_pair_detach_sym_session``
-
-* cryptodev: the structures ``rte_crypto_op``, ``rte_crypto_sym_op``
- and ``rte_crypto_sym_xform`` will be restructured in 17.08,
- for correctness and improvement.
-
-* crypto/scheduler: the following two functions are deprecated starting
- from 17.05 and will be removed in 17.08:
-
- - ``rte_crpytodev_scheduler_mode_get``, replaced by ``rte_cryptodev_scheduler_mode_get``
- - ``rte_crpytodev_scheduler_mode_set``, replaced by ``rte_cryptodev_scheduler_mode_set``
-
-* librte_table: The ``key_mask`` parameter will be added to all the hash tables
- that currently do not have it, as well as to the hash compute function prototype.
- The non-"do-sig" versions of the hash tables will be removed
- (including the ``signature_offset`` parameter)
- and the "do-sig" versions renamed accordingly.
+* ethdev: Maximum and minimum MTU values vary between hardware devices. In
+ hardware agnostic DPDK applications access to such information would allow
+ a more accurate way of validating and setting supported MTU values on a per
+ device basis rather than using a defined default for all devices. To
+ resolve this, the following members will be added to ``rte_eth_dev_info``.
+ Note: these can be added to fit a hole in the existing structure for amd64
+ but not for 32-bit, as such ABI change will occur as size of the structure
+ will increase.
+
+ - Member ``uint16_t min_mtu`` the minimum MTU allowed.
+ - Member ``uint16_t max_mtu`` the maximum MTU allowed.
+
+* security: New field ``uint64_t opaque_data`` is planned to be added into
+ ``rte_security_session`` structure. That would allow upper layer to easily
+ associate/de-associate some user defined data with the security session.
+
+* cryptodev: several API and ABI changes are planned for rte_cryptodev
+ in v19.02:
+
+ - The size and layout of ``rte_cryptodev_sym_session`` will change
+ to fix existing issues.
+ - The size and layout of ``rte_cryptodev_qp_conf`` and syntax of
+ ``rte_cryptodev_queue_pair_setup`` will change to to allow to use
+ two different mempools for crypto and device private sessions.
+
+* pdump: As we changed to use generic IPC, some changes in APIs and structure
+ are expected in subsequent release.
+
+ - ``rte_pdump_set_socket_dir`` will be removed;
+ - The parameter, ``path``, of ``rte_pdump_init`` will be removed;
+ - The enum ``rte_pdump_socktype`` will be removed.
Code Review / deb_dpdk.git / blobdiff