--- /dev/null
+DPDK Release 17.05
+==================
+
+.. **Read this first.**
+
+ The text in the sections below explains how to update the release notes.
+
+ Use proper spelling, capitalization and punctuation in all sections.
+
+ Variable and config names should be quoted as fixed width text:
+ ``LIKE_THIS``.
+
+ Build the docs and view the output file to ensure the changes are correct::
+
+ make doc-guides-html
+
+ xdg-open build/doc/html/guides/rel_notes/release_17_05.html
+
+
+New Features
+------------
+
+.. This section should contain new features added in this release. Sample
+ format:
+
+ * **Add a title in the past tense with a full stop.**
+
+ Add a short 1-2 sentence description in the past tense. The description
+ should be enough to allow someone scanning the release notes to
+ understand the new feature.
+
+ If the feature adds a lot of sub-features you can use a bullet list like
+ this:
+
+ * Added feature foo to do something.
+ * Enhanced feature bar to do something else.
+
+ Refer to the previous release notes for examples.
+
+ This section is a comment. do not overwrite or remove it.
+ Also, make sure to start the actual text at the margin.
+ =========================================================
+
+* **Reorganized mbuf structure.**
+
+ The mbuf structure has been reorganized as follows:
+
+ * Align fields to facilitate the writing of ``data_off``, ``refcnt``, and
+ ``nb_segs`` in one operation.
+ * Use 2 bytes for port and number of segments.
+ * Move the sequence number to the second cache line.
+ * Add a timestamp field.
+ * Set default value for ``refcnt``, ``next`` and ``nb_segs`` at mbuf free.
+
+* **Added mbuf raw free API.**
+
+ Moved ``rte_mbuf_raw_free()`` and ``rte_pktmbuf_prefree_seg()`` functions to
+ the public API.
+
+* **Added free Tx mbuf on demand API.**
+
+ Added a new function ``rte_eth_tx_done_cleanup()`` which allows an
+ application to request the driver to release mbufs that are no longer in use
+ from a Tx ring, independent of whether or not the ``tx_rs_thresh`` has been
+ crossed.
+
+* **Added device removal interrupt.**
+
+ Added a new ethdev event ``RTE_ETH_DEV_INTR_RMV`` to signify
+ the sudden removal of a device.
+ This event can be advertised by PCI drivers and enabled accordingly.
+
+* **Added EAL dynamic log framework.**
+
+ Added new APIs to dynamically register named log types, and control
+ the level of each type independently.
+
+* **Added descriptor status ethdev API.**
+
+ Added a new API to get the status of a descriptor.
+
+ For Rx, it is almost similar to the ``rx_descriptor_done`` API, except
+ it differentiates descriptors which are held by the driver and not
+ returned to the hardware. For Tx, it is a new API.
+
+* **Increased number of next hops for LPM IPv6 to 2^21.**
+
+ The next_hop field has been extended from 8 bits to 21 bits for IPv6.
+
+* **Added VFIO hotplug support.**
+
+ Added hotplug support for VFIO in addition to the existing UIO support.
+
+* **Added PowerPC support to pci probing for vfio-pci devices.**
+
+ Enabled sPAPR IOMMU based pci probing for vfio-pci devices.
+
+* **Kept consistent PMD batching behavior.**
+
+ Removed the limit of fm10k/i40e/ixgbe Tx burst size and vhost Rx/Tx burst size
+ in order to support the same policy of "make an best effort to Rx/Tx pkts"
+ for PMDs.
+
+* **Updated the ixgbe base driver.**
+
+ Updated the ixgbe base driver, including the following changes:
+
+ * Add link block check for KR.
+ * Complete HW initialization even if SFP is not present.
+ * Add VF xcast promiscuous mode.
+
+* **Added PowerPC support for i40e and its vector PMD.**
+
+ Enabled i40e PMD and its vector PMD by default in PowerPC.
+
+* **Added VF max bandwidth setting in i40e.**
+
+ Enabled capability to set the max bandwidth for a VF in i40e.
+
+* **Added VF TC min and max bandwidth setting in i40e.**
+
+ Enabled capability to set the min and max allocated bandwidth for a TC on a
+ VF in i40.
+
+* **Added TC strict priority mode setting on i40e.**
+
+ There are 2 Tx scheduling modes supported for TCs by i40e HW: round robin
+ mode and strict priority mode. By default the round robin mode is used. It
+ is now possible to change the Tx scheduling mode for a TC. This is a global
+ setting on a physical port.
+
+* **Added i40e dynamic device personalization support.**
+
+ * Added dynamic device personalization processing to i40e firmware.
+
+* **Added Cloud Filter for QinQ steering to i40e.**
+
+ * Added a QinQ cloud filter on the i40e PMD, for steering traffic to a VM
+ using both VLAN tags. Note, this feature is not supported in Vector Mode.
+
+* **Updated mlx5 PMD.**
+
+ Updated the mlx5 driver, including the following changes:
+
+ * Added Generic flow API support for classification according to ether type.
+ * Extended Generic flow API support for classification of IPv6 flow
+ according to Vtc flow, Protocol and Hop limit.
+ * Added Generic flow API support for FLAG action.
+ * Added Generic flow API support for RSS action.
+ * Added support for TSO for non-tunneled and VXLAN packets.
+ * Added support for hardware Tx checksum offloads for VXLAN packets.
+ * Added support for user space Rx interrupt mode.
+ * Improved ConnectX-5 single core and maximum performance.
+
+* **Updated mlx4 PMD.**
+
+ Updated the mlx4 driver, including the following changes:
+
+ * Added support for Generic flow API basic flow items and actions.
+ * Added support for device removal event.
+
+* **Updated the sfc_efx driver.**
+
+ * Added Generic Flow API support for Ethernet, VLAN, IPv4, IPv6, UDP and TCP
+ pattern items with QUEUE action for ingress traffic.
+
+ * Added support for virtual functions (VFs).
+
+* **Added LiquidIO network PMD.**
+
+ Added poll mode driver support for Cavium LiquidIO II server adapter VFs.
+
+* **Added Atomic Rules Arkville PMD.**
+
+ Added a new poll mode driver for the Arkville family of
+ devices from Atomic Rules. The net/ark PMD supports line-rate
+ agnostic, multi-queue data movement on Arkville core FPGA instances.
+
+* **Added support for NXP DPAA2 - FSLMC bus.**
+
+ Added the new bus "fslmc" driver for NXP DPAA2 devices. See the
+ "Network Interface Controller Drivers" document for more details of this new
+ driver.
+
+* **Added support for NXP DPAA2 Network PMD.**
+
+ Added the new "dpaa2" net driver for NXP DPAA2 devices. See the
+ "Network Interface Controller Drivers" document for more details of this new
+ driver.
+
+* **Added support for the Wind River Systems AVP PMD.**
+
+ Added a new networking driver for the AVP device type. Theses devices are
+ specific to the Wind River Systems virtualization platforms.
+
+* **Added vmxnet3 version 3 support.**
+
+ Added support for vmxnet3 version 3 which includes several
+ performance enhancements such as configurable Tx data ring, Receive
+ Data Ring, and the ability to register memory regions.
+
+* **Updated the TAP driver.**
+
+ Updated the TAP PMD to:
+
+ * Support MTU modification.
+ * Support packet type for Rx.
+ * Support segmented packets on Rx and Tx.
+ * Speed up Rx on TAP when no packets are available.
+ * Support capturing traffic from another netdevice.
+ * Dynamically change link status when the underlying interface state changes.
+ * Added Generic Flow API support for Ethernet, VLAN, IPv4, IPv6, UDP and
+ TCP pattern items with DROP, QUEUE and PASSTHRU actions for ingress
+ traffic.
+
+* **Added MTU feature support to Virtio and Vhost.**
+
+ Implemented new Virtio MTU feature in Vhost and Virtio:
+
+ * Add ``rte_vhost_mtu_get()`` API to Vhost library.
+ * Enable Vhost PMD's MTU get feature.
+ * Get max MTU value from host in Virtio PMD
+
+* **Added interrupt mode support for virtio-user.**
+
+ Implemented Rxq interrupt mode and LSC support for virtio-user as a virtual
+ device. Supported cases:
+
+ * Rxq interrupt for virtio-user + vhost-user as the backend.
+ * Rxq interrupt for virtio-user + vhost-kernel as the backend.
+ * LSC interrupt for virtio-user + vhost-user as the backend.
+
+* **Added event driven programming model library (rte_eventdev).**
+
+ This API introduces an event driven programming model.
+
+ In a polling model, lcores poll ethdev ports and associated
+ Rx queues directly to look for a packet. By contrast in an event
+ driven model, lcores call the scheduler that selects packets for
+ them based on programmer-specified criteria. The Eventdev library
+ adds support for an event driven programming model, which offers
+ applications automatic multicore scaling, dynamic load balancing,
+ pipelining, packet ingress order maintenance and
+ synchronization services to simplify application packet processing.
+
+ By introducing an event driven programming model, DPDK can support
+ both polling and event driven programming models for packet processing,
+ and applications are free to choose whatever model
+ (or combination of the two) best suits their needs.
+
+* **Added Software Eventdev PMD.**
+
+ Added support for the software eventdev PMD. The software eventdev is a
+ software based scheduler device that implements the eventdev API. This
+ PMD allows an application to configure a pipeline using the eventdev
+ library, and run the scheduling workload on a CPU core.
+
+* **Added Cavium OCTEONTX Eventdev PMD.**
+
+ Added the new octeontx ssovf eventdev driver for OCTEONTX devices. See the
+ "Event Device Drivers" document for more details on this new driver.
+
+* **Added information metrics library.**
+
+ Added a library that allows information metrics to be added and updated
+ by producers, typically other libraries, for later retrieval by
+ consumers such as applications. It is intended to provide a
+ reporting mechanism that is independent of other libraries such
+ as ethdev.
+
+* **Added bit-rate calculation library.**
+
+ Added a library that can be used to calculate device bit-rates. Calculated
+ bitrates are reported using the metrics library.
+
+* **Added latency stats library.**
+
+ Added a library that measures packet latency. The collected statistics are
+ jitter and latency. For latency the minimum, average, and maximum is
+ measured.
+
+* **Added NXP DPAA2 SEC crypto PMD.**
+
+ A new "dpaa2_sec" hardware based crypto PMD for NXP DPAA2 devices has been
+ added. See the "Crypto Device Drivers" document for more details on this
+ driver.
+
+* **Updated the Cryptodev Scheduler PMD.**
+
+ * Added a packet-size based distribution mode, which distributes the enqueued
+ crypto operations among two slaves, based on their data lengths.
+ * Added fail-over scheduling mode, which enqueues crypto operations to a
+ primary slave first. Then, any operation that cannot be enqueued is
+ enqueued to a secondary slave.
+ * Added mode specific option support, so each scheduling mode can
+ now be configured individually by the new API.
+
+* **Updated the QAT PMD.**
+
+ The QAT PMD has been updated with additional support for:
+
+ * AES DOCSIS BPI algorithm.
+ * DES DOCSIS BPI algorithm.
+ * ZUC EEA3/EIA3 algorithms.
+
+* **Updated the AESNI MB PMD.**
+
+ The AESNI MB PMD has been updated with additional support for:
+
+ * AES DOCSIS BPI algorithm.
+
+* **Updated the OpenSSL PMD.**
+
+ The OpenSSL PMD has been updated with additional support for:
+
+ * DES DOCSIS BPI algorithm.
+
+
+Resolved Issues
+---------------
+
+.. This section should contain bug fixes added to the relevant
+ sections. Sample format:
+
+ * **code/section Fixed issue in the past tense with a full stop.**
+
+ Add a short 1-2 sentence description of the resolved issue in the past
+ tense.
+
+ The title should contain the code/lib section like a commit message.
+
+ Add the entries in alphabetic order in the relevant sections below.
+
+ This section is a comment. do not overwrite or remove it.
+ Also, make sure to start the actual text at the margin.
+ =========================================================
+
+
+* **l2fwd-keepalive: Fixed unclean shutdowns.**
+
+ Added clean shutdown to l2fwd-keepalive so that it can free up
+ stale resources used for inter-process communication.
+
+
+Known Issues
+------------
+
+.. This section should contain new known issues in this release. Sample format:
+
+ * **Add title in present tense with full stop.**
+
+ Add a short 1-2 sentence description of the known issue in the present
+ tense. Add information on any known workarounds.
+
+ This section is a comment. do not overwrite or remove it.
+ Also, make sure to start the actual text at the margin.
+ =========================================================
+
+* **LSC interrupt doesn't work for virtio-user + vhost-kernel.**
+
+ LSC interrupt cannot be detected when setting the backend, tap device,
+ up/down as we fail to find a way to monitor such event.
+
+
+API Changes
+-----------
+
+.. This section should contain API changes. Sample format:
+
+ * Add a short 1-2 sentence description of the API change. Use fixed width
+ quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past
+ tense.
+
+ This section is a comment. do not overwrite or remove it.
+ Also, make sure to start the actual text at the margin.
+ =========================================================
+
+* The LPM ``next_hop`` field is extended from 8 bits to 21 bits for IPv6
+ while keeping ABI compatibility.
+
+* **Reworked rte_ring library.**
+
+ The rte_ring library has been reworked and updated. The following changes
+ have been made to it:
+
+ * Removed the build-time setting ``CONFIG_RTE_RING_SPLIT_PROD_CONS``.
+ * Removed the build-time setting ``CONFIG_RTE_LIBRTE_RING_DEBUG``.
+ * Removed the build-time setting ``CONFIG_RTE_RING_PAUSE_REP_COUNT``.
+ * Removed the function ``rte_ring_set_water_mark`` as part of a general
+ removal of watermarks support in the library.
+ * Added an extra parameter to the burst/bulk enqueue functions to
+ return the number of free spaces in the ring after enqueue. This can
+ be used by an application to implement its own watermark functionality.
+ * Added an extra parameter to the burst/bulk dequeue functions to return
+ the number elements remaining in the ring after dequeue.
+ * Changed the return value of the enqueue and dequeue bulk functions to
+ match that of the burst equivalents. In all cases, ring functions which
+ operate on multiple packets now return the number of elements enqueued
+ or dequeued, as appropriate. The updated functions are:
+
+ - ``rte_ring_mp_enqueue_bulk``
+ - ``rte_ring_sp_enqueue_bulk``
+ - ``rte_ring_enqueue_bulk``
+ - ``rte_ring_mc_dequeue_bulk``
+ - ``rte_ring_sc_dequeue_bulk``
+ - ``rte_ring_dequeue_bulk``
+
+ NOTE: the above functions all have different parameters as well as
+ different return values, due to the other listed changes above. This
+ means that all instances of the functions in existing code will be
+ flagged by the compiler. The return value usage should be checked
+ while fixing the compiler error due to the extra parameter.
+
+* **Reworked rte_vhost library.**
+
+ The rte_vhost library has been reworked to make it generic enough so that
+ the user could build other vhost-user drivers on top of it. To achieve this
+ the following changes have been made:
+
+ * The following vhost-pmd APIs are removed:
+
+ * ``rte_eth_vhost_feature_disable``
+ * ``rte_eth_vhost_feature_enable``
+ * ``rte_eth_vhost_feature_get``
+
+ * The vhost API ``rte_vhost_driver_callback_register(ops)`` is reworked to
+ be per vhost-user socket file. Thus, it takes one more argument:
+ ``rte_vhost_driver_callback_register(path, ops)``.
+
+ * The vhost API ``rte_vhost_get_queue_num`` is deprecated, instead,
+ ``rte_vhost_get_vring_num`` should be used.
+
+ * The following macros are removed in ``rte_virtio_net.h``
+
+ * ``VIRTIO_RXQ``
+ * ``VIRTIO_TXQ``
+ * ``VIRTIO_QNUM``
+
+ * The following net specific header files are removed in ``rte_virtio_net.h``
+
+ * ``linux/virtio_net.h``
+ * ``sys/socket.h``
+ * ``linux/if.h``
+ * ``rte_ether.h``
+
+ * The vhost struct ``virtio_net_device_ops`` is renamed to
+ ``vhost_device_ops``
+
+ * The vhost API ``rte_vhost_driver_session_start`` is removed. Instead,
+ ``rte_vhost_driver_start`` should be used, and there is no need to create
+ a thread to call it.
+
+ * The vhost public header file ``rte_virtio_net.h`` is renamed to
+ ``rte_vhost.h``
+
+
+ABI Changes
+-----------
+
+.. This section should contain ABI changes. Sample format:
+
+ * Add a short 1-2 sentence description of the ABI change that was announced
+ in the previous releases and made in this release. Use fixed width quotes
+ for ``rte_function_names`` or ``rte_struct_names``. Use the past tense.
+
+ This section is a comment. do not overwrite or remove it.
+ Also, make sure to start the actual text at the margin.
+ =========================================================
+
+* **Reorganized the mbuf structure.**
+
+ The order and size of the fields in the ``mbuf`` structure changed,
+ as described in the `New Features`_ section.
+
+* The ``rte_cryptodev_info.sym`` structure has a new field ``max_nb_sessions_per_qp``
+ to support drivers which may support a limited number of sessions per queue_pair.
+
+
+Removed Items
+-------------
+
+.. This section should contain removed items in this release. Sample format:
+
+ * Add a short 1-2 sentence description of the removed item in the past
+ tense.
+
+ This section is a comment. do not overwrite or remove it.
+ Also, make sure to start the actual text at the margin.
+ =========================================================
+
+* KNI vhost support has been removed.
+
+* The dpdk_qat sample application has been removed.
+
+Shared Library Versions
+-----------------------
+
+.. Update any library version updated in this release and prepend with a ``+``
+ sign, like this:
+
+ librte_acl.so.2
+ + librte_cfgfile.so.2
+ librte_cmdline.so.2
+
+ This section is a comment. do not overwrite or remove it.
+ =========================================================
+
+
+The libraries prepended with a plus sign were incremented in this version.
+
+.. code-block:: diff
+
+ librte_acl.so.2
+ + librte_bitratestats.so.1
+ librte_cfgfile.so.2
+ librte_cmdline.so.2
+ librte_cryptodev.so.2
+ librte_distributor.so.1
+ + librte_eal.so.4
+ librte_ethdev.so.6
+ librte_hash.so.2
+ librte_ip_frag.so.1
+ librte_jobstats.so.1
+ librte_kni.so.2
+ librte_kvargs.so.1
+ + librte_latencystats.so.1
+ librte_lpm.so.2
+ + librte_mbuf.so.3
+ librte_mempool.so.2
+ librte_meter.so.1
+ + librte_metrics.so.1
+ librte_net.so.1
+ librte_pdump.so.1
+ librte_pipeline.so.3
+ librte_pmd_bond.so.1
+ librte_pmd_ring.so.2
+ librte_port.so.3
+ librte_power.so.1
+ librte_reorder.so.1
+ librte_ring.so.1
+ librte_sched.so.1
+ librte_table.so.2
+ librte_timer.so.1
+ librte_vhost.so.3
+
+
+Tested Platforms
+----------------
+
+.. This section should contain a list of platforms that were tested with this
+ release.
+
+ The format is:
+
+ * <vendor> platform with <vendor> <type of devices> combinations
+
+ * List of CPU
+ * List of OS
+ * List of devices
+ * Other relevant details...
+
+ This section is a comment. do not overwrite or remove it.
+ Also, make sure to start the actual text at the margin.
+ =========================================================
+
+* Intel(R) platforms with Intel(R) NICs combinations
+
+ * CPU
+
+ * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz
+ * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz
+ * Intel(R) Xeon(R) CPU E5-2658 v3 @ 2.20GHz
+
+ * OS:
+
+ * CentOS 7.2
+ * Fedora 25
+ * FreeBSD 11
+ * Red Hat Enterprise Linux Server release 7.3
+ * SUSE Enterprise Linux 12
+ * Wind River Linux 8
+ * Ubuntu 16.04
+ * Ubuntu 16.10
+
+ * NICs:
+
+ * Intel(R) 82599ES 10 Gigabit Ethernet Controller
+
+ * Firmware version: 0x61bf0001
+ * Device id (pf/vf): 8086:10fb / 8086:10ed
+ * Driver version: 4.0.1-k (ixgbe)
+
+ * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T
+
+ * Firmware version: 0x800001cf
+ * Device id (pf/vf): 8086:15ad / 8086:15a8
+ * Driver version: 4.2.5 (ixgbe)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1572 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA1 (1x40G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1584 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G)
+
+ * Firmware version: 5.05
+ * Device id (pf/vf): 8086:1583 / 8086:154c
+ * Driver version: 1.5.23 (i40e)
+
+ * Intel(R) Corporation I350 Gigabit Network Connection
+
+ * Firmware version: 1.48, 0x800006e7
+ * Device id (pf/vf): 8086:1521 / 8086:1520
+ * Driver version: 5.2.13-k (igb)
+
+* Intel(R) platforms with Mellanox(R) NICs combinations
+
+ * Platform details:
+
+ * Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz
+ * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
+ * Intel(R) Xeon(R) CPU E5-2640 @ 2.50GHz
+
+ * OS:
+
+ * Red Hat Enterprise Linux Server release 7.3 (Maipo)
+ * Red Hat Enterprise Linux Server release 7.2 (Maipo)
+ * Ubuntu 16.10
+ * Ubuntu 16.04
+ * Ubuntu 14.04
+
+ * MLNX_OFED: 4.0-2.0.0.0
+
+ * NICs:
+
+ * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1007
+ * Firmware version: 2.40.5030
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1015
+ * Firmware version: 14.18.2000
+
+ * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1017
+ * Firmware version: 16.19.1200
+
+ * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G)
+
+ * Host interface: PCI Express 4.0 x16
+ * Device ID: 15b3:1019
+ * Firmware version: 16.19.1200
+
+* IBM(R) Power8(R) with Mellanox(R) NICs combinations
+
+ * Platform details:
+
+ * Processor: POWER8E (raw), AltiVec supported
+ * type-model: 8247-22L
+ * Firmware FW810.21 (SV810_108)
+
+ * OS: Ubuntu 16.04 LTS PPC le
+
+ * MLNX_OFED: 4.0-2.0.0.0
+
+ * NICs:
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x8
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
+
+ * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G)
+
+ * Host interface: PCI Express 3.0 x16
+ * Device ID: 15b3:1013
+ * Firmware version: 12.18.2000
Code Review / deb_dpdk.git / blobdiff