New upstream version 18.02
[deb_dpdk.git] / doc / guides / sample_app_ug / tep_termination.rst
index c3d1e97..b333297 100644 (file)
@@ -1,34 +1,5 @@
-
-..  BSD LICENSE
-    Copyright(c) 2010-2015 Intel Corporation. All rights reserved.
-    All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions
-    are met:
-
-    * Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-    * Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in
-    the documentation and/or other materials provided with the
-    distribution.
-    * Neither the name of Intel Corporation nor the names of its
-    contributors may be used to endorse or promote products derived
-    from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-    A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-    OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-    SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-    LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-    DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-    THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
+..  SPDX-License-Identifier: BSD-3-Clause
+    Copyright(c) 2010-2015 Intel Corporation.
 
 TEP termination Sample Application
 ==================================
@@ -99,7 +70,8 @@ The sample will support the followings:
 
 *   TSO offload support for tunneling packet.
 
-The following figure shows the framework of the TEP termination sample application based on vhost-cuse.
+The following figure shows the framework of the TEP termination sample
+application based on DPDK vhost lib.
 
 .. _figure_tep_termination_arch:
 
@@ -118,89 +90,22 @@ The example in this section have been validated with the following distributions
 
 *   Fedora* 20
 
-Prerequisites
--------------
-
-Refer to :ref:`vhost_app_prerequisites`.
-
 Compiling the Sample Code
 -------------------------
-#.  Compile vhost lib:
 
-    To enable vhost, turn on vhost library in the configure file config/common_linuxapp.
+To enable vhost, turn on vhost library in the configure file
+``config/common_linuxapp``.
 
     .. code-block:: console
 
         CONFIG_RTE_LIBRTE_VHOST=y
 
-    vhost user is turned on by default in the configure file config/common_linuxapp.
-    To enable vhost cuse, disable vhost user.
-
-    .. code-block:: console
-
-        CONFIG_RTE_LIBRTE_VHOST_USER=n
-
-     After vhost is enabled and the implementation is selected, build the vhost library.
-
-#.  Go to the examples directory:
-
-    .. code-block:: console
-
-        export RTE_SDK=/path/to/rte_sdk
-        cd ${RTE_SDK}/examples/tep_termination
-
-#.  Set the target (a default target is used if not specified). For example:
-
-    .. code-block:: console
-
-        export RTE_TARGET=x86_64-native-linuxapp-gcc
-
-    See the DPDK Getting Started Guide for possible RTE_TARGET values.
-
-#.  Build the application:
-
-    .. code-block:: console
-
-        cd ${RTE_SDK}
-        make config ${RTE_TARGET}
-        make install ${RTE_TARGET}
-        cd ${RTE_SDK}/examples/tep_termination
-        make
-
-#.  Go to the eventfd_link directory(vhost cuse required):
-
-    .. code-block:: console
-
-        cd ${RTE_SDK}/lib/librte_vhost/eventfd_link
-
-#.  Build the eventfd_link kernel module(vhost cuse required):
-
-    .. code-block:: console
-
-        make
+Then following the to compile the sample application shown in
+:doc:`compiling`.
 
 Running the Sample Code
 -----------------------
 
-#.  Install the cuse kernel module(vhost cuse required):
-
-    .. code-block:: console
-
-        modprobe cuse
-
-#.  Go to the eventfd_link directory(vhost cuse required):
-
-    .. code-block:: console
-
-        export RTE_SDK=/path/to/rte_sdk
-        cd ${RTE_SDK}/lib/librte_vhost/eventfd_link
-
-#.  Install the eventfd_link module(vhost cuse required):
-
-    .. code-block:: console
-
-        insmod ./eventfd_link.ko
-
 #.  Go to the examples directory:
 
     .. code-block:: console
@@ -212,7 +117,7 @@ Running the Sample Code
 
     .. code-block:: console
 
-        user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+        user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                         -p 0x1 --dev-basename tep-termination --nb-devices 4
                         --udp-port 4789 --filter-type 1
 
@@ -225,8 +130,7 @@ Parameters
 
 **The same parameters with the vhost sample.**
 
-Refer to :ref:`vhost_app_parameters` for the meanings of 'Basename',
-'Stats', 'RX Retry', 'RX Retry Number' and 'RX Retry Delay Time'.
+Refer to :ref:`vhost_app_parameters` for detailed explanation.
 
 **Number of Devices.**
 
@@ -235,7 +139,7 @@ The default value is 2.
 
 .. code-block:: console
 
-    user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+    user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                     --nb-devices 2
 
 **Tunneling UDP port.**
@@ -245,7 +149,7 @@ The default value is 4789.
 
 .. code-block:: console
 
-    user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+    user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                     --nb-devices 2 --udp-port 4789
 
 **Filter Type.**
@@ -256,7 +160,7 @@ The default value is 1, which means the filter type of inner MAC and tenant ID i
 
 .. code-block:: console
 
-    user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+    user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                 --nb-devices 2 --udp-port 4789 --filter-type 1
 
 **TX Checksum.**
@@ -266,7 +170,7 @@ The default value is 0, which means the checksum offload is disabled.
 
 .. code-block:: console
 
-    user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+    user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                 --nb-devices 2 --tx-checksum
 
 **TCP segment size.**
@@ -276,7 +180,7 @@ The default value is 0, which means TSO offload is disabled.
 
 .. code-block:: console
 
-    user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+    user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                 --tx-checksum --tso-segsz 800
 
 **Decapsulation option.**
@@ -286,7 +190,7 @@ The default value is 1.
 
 .. code-block:: console
 
-    user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+    user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                 --nb-devices 4 --udp-port 4789 --decap 1
 
 **Encapsulation option.**
@@ -296,19 +200,19 @@ The default value is 1.
 
 .. code-block:: console
 
-    user@target:~$ ./build/app/tep_termination -c f -n 4 --huge-dir /mnt/huge --
+    user@target:~$ ./build/app/tep_termination -l 0-3 -n 4 --huge-dir /mnt/huge --
                 --nb-devices 4 --udp-port 4789 --encap 1
 
 
 Running the Virtual Machine (QEMU)
 ----------------------------------
 
-Refer to :ref:`vhost_app_running`.
+Refer to :ref:`vhost_app_run_vm`.
 
 Running DPDK in the Virtual Machine
 -----------------------------------
 
-Refer to :ref:`vhost_app_running_dpdk`.
+Refer to :ref:`vhost_app_run_dpdk_inside_guest`.
 
 Passing Traffic to the Virtual Machine Device
 ---------------------------------------------