#include <rte_malloc.h>
#include <rte_ring.h>
#include <rte_kvargs.h>
+#include <rte_cycles.h>
#include <rte_bbdev.h>
#include <rte_bbdev_pmd.h>
#include <phy_rate_match.h>
#include <divide.h>
-#define DRIVER_NAME turbo_sw
+#define DRIVER_NAME baseband_turbo_sw
/* Turbo SW PMD logging ID */
static int bbdev_turbo_sw_logtype;
rte_bbdev_log(DEBUG, RTE_STR(__LINE__) ":%s() " fmt, __func__, \
##__VA_ARGS__)
-/* Number of columns in sub-block interleaver (36.212, section 5.1.4.1.1) */
-#define C_SUBBLOCK (32)
-#define MAX_TB_SIZE (391656)
-#define MAX_CB_SIZE (6144)
-#define MAX_KW (18528)
+#define DEINT_INPUT_BUF_SIZE (((RTE_BBDEV_MAX_CB_SIZE >> 3) + 1) * 48)
+#define DEINT_OUTPUT_BUF_SIZE (DEINT_INPUT_BUF_SIZE * 6)
+#define ADAPTER_OUTPUT_BUF_SIZE ((RTE_BBDEV_MAX_CB_SIZE + 4) * 48)
/* private data structure */
struct bbdev_private {
{
int32_t result = 0;
- if (k < 40 || k > MAX_CB_SIZE)
+ if (k < RTE_BBDEV_MIN_CB_SIZE || k > RTE_BBDEV_MAX_CB_SIZE)
return -1;
if (k > 2048) {
RTE_BBDEV_TURBO_POS_LLR_1_BIT_IN |
RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN |
RTE_BBDEV_TURBO_CRC_TYPE_24B |
+ RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP |
RTE_BBDEV_TURBO_EARLY_TERMINATION,
+ .max_llr_modulus = 16,
.num_buffers_src = RTE_BBDEV_MAX_CODE_BLOCKS,
.num_buffers_hard_out =
RTE_BBDEV_MAX_CODE_BLOCKS,
dev_info->max_num_queues = internals->max_nb_queues;
dev_info->queue_size_lim = RTE_BBDEV_QUEUE_SIZE_LIMIT;
dev_info->hardware_accelerated = false;
- dev_info->max_queue_priority = 0;
+ dev_info->max_dl_queue_priority = 0;
+ dev_info->max_ul_queue_priority = 0;
dev_info->default_queue_conf = default_queue_conf;
dev_info->capabilities = bbdev_capabilities;
dev_info->cpu_flag_reqs = &cpu_flag;
}
/* Allocate memory for encoder output. */
- ret = snprintf(name, RTE_RING_NAMESIZE, RTE_STR(DRIVER_NAME)"_enc_out%u:%u",
+ ret = snprintf(name, RTE_RING_NAMESIZE, RTE_STR(DRIVER_NAME)"_enc_o%u:%u",
dev->data->dev_id, q_id);
if ((ret < 0) || (ret >= (int)RTE_RING_NAMESIZE)) {
rte_bbdev_log(ERR,
return -ENAMETOOLONG;
}
q->enc_out = rte_zmalloc_socket(name,
- ((MAX_TB_SIZE >> 3) + 3) * sizeof(*q->enc_out) * 3,
+ ((RTE_BBDEV_MAX_TB_SIZE >> 3) + 3) *
+ sizeof(*q->enc_out) * 3,
RTE_CACHE_LINE_SIZE, queue_conf->socket);
if (q->enc_out == NULL) {
rte_bbdev_log(ERR,
/* Allocate memory for rate matching output. */
ret = snprintf(name, RTE_RING_NAMESIZE,
- RTE_STR(DRIVER_NAME)"_enc_in%u:%u", dev->data->dev_id,
+ RTE_STR(DRIVER_NAME)"_enc_i%u:%u", dev->data->dev_id,
q_id);
if ((ret < 0) || (ret >= (int)RTE_RING_NAMESIZE)) {
rte_bbdev_log(ERR,
return -ENAMETOOLONG;
}
q->enc_in = rte_zmalloc_socket(name,
- (MAX_CB_SIZE >> 3) * sizeof(*q->enc_in),
+ (RTE_BBDEV_MAX_CB_SIZE >> 3) * sizeof(*q->enc_in),
RTE_CACHE_LINE_SIZE, queue_conf->socket);
if (q->enc_in == NULL) {
rte_bbdev_log(ERR,
return -ENAMETOOLONG;
}
q->ag = rte_zmalloc_socket(name,
- MAX_CB_SIZE * 10 * sizeof(*q->ag),
+ RTE_BBDEV_MAX_CB_SIZE * 10 * sizeof(*q->ag),
RTE_CACHE_LINE_SIZE, queue_conf->socket);
if (q->ag == NULL) {
rte_bbdev_log(ERR,
return -ENAMETOOLONG;
}
q->code_block = rte_zmalloc_socket(name,
- (6144 >> 3) * sizeof(*q->code_block),
+ RTE_BBDEV_MAX_CB_SIZE * sizeof(*q->code_block),
RTE_CACHE_LINE_SIZE, queue_conf->socket);
if (q->code_block == NULL) {
rte_bbdev_log(ERR,
/* Allocate memory for Deinterleaver input. */
ret = snprintf(name, RTE_RING_NAMESIZE,
- RTE_STR(DRIVER_NAME)"_deint_input%u:%u",
+ RTE_STR(DRIVER_NAME)"_de_i%u:%u",
dev->data->dev_id, q_id);
if ((ret < 0) || (ret >= (int)RTE_RING_NAMESIZE)) {
rte_bbdev_log(ERR,
return -ENAMETOOLONG;
}
q->deint_input = rte_zmalloc_socket(name,
- MAX_KW * sizeof(*q->deint_input),
+ DEINT_INPUT_BUF_SIZE * sizeof(*q->deint_input),
RTE_CACHE_LINE_SIZE, queue_conf->socket);
if (q->deint_input == NULL) {
rte_bbdev_log(ERR,
/* Allocate memory for Deinterleaver output. */
ret = snprintf(name, RTE_RING_NAMESIZE,
- RTE_STR(DRIVER_NAME)"_deint_output%u:%u",
+ RTE_STR(DRIVER_NAME)"_de_o%u:%u",
dev->data->dev_id, q_id);
if ((ret < 0) || (ret >= (int)RTE_RING_NAMESIZE)) {
rte_bbdev_log(ERR,
return -ENAMETOOLONG;
}
q->deint_output = rte_zmalloc_socket(NULL,
- MAX_KW * sizeof(*q->deint_output),
+ DEINT_OUTPUT_BUF_SIZE * sizeof(*q->deint_output),
RTE_CACHE_LINE_SIZE, queue_conf->socket);
if (q->deint_output == NULL) {
rte_bbdev_log(ERR,
/* Allocate memory for Adapter output. */
ret = snprintf(name, RTE_RING_NAMESIZE,
- RTE_STR(DRIVER_NAME)"_adapter_output%u:%u",
+ RTE_STR(DRIVER_NAME)"_ada_o%u:%u",
dev->data->dev_id, q_id);
if ((ret < 0) || (ret >= (int)RTE_RING_NAMESIZE)) {
rte_bbdev_log(ERR,
return -ENAMETOOLONG;
}
q->adapter_output = rte_zmalloc_socket(NULL,
- MAX_CB_SIZE * 6 * sizeof(*q->adapter_output),
+ ADAPTER_OUTPUT_BUF_SIZE * sizeof(*q->adapter_output),
RTE_CACHE_LINE_SIZE, queue_conf->socket);
if (q->adapter_output == NULL) {
rte_bbdev_log(ERR,
return -1;
}
- if (k > MAX_CB_SIZE) {
+ if (k > RTE_BBDEV_MAX_CB_SIZE) {
rte_bbdev_log(ERR, "CB size (%u) is too big, max: %d",
- k, MAX_CB_SIZE);
+ k, RTE_BBDEV_MAX_CB_SIZE);
return -1;
}
return -1;
}
- if (kw > MAX_KW) {
+ if (kw > RTE_BBDEV_MAX_KW) {
rte_bbdev_log(ERR, "Input length (%u) is too big, max: %d",
- kw, MAX_KW);
+ kw, RTE_BBDEV_MAX_KW);
return -1;
}
static inline void
process_enc_cb(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op,
- uint8_t cb_idx, uint8_t c, uint16_t k, uint16_t ncb,
+ uint8_t r, uint8_t c, uint16_t k, uint16_t ncb,
uint32_t e, struct rte_mbuf *m_in, struct rte_mbuf *m_out,
- uint16_t in_offset, uint16_t out_offset, uint16_t total_left)
+ uint16_t in_offset, uint16_t out_offset, uint16_t total_left,
+ struct rte_bbdev_stats *q_stats)
{
int ret;
int16_t k_idx;
uint16_t m;
uint8_t *in, *out0, *out1, *out2, *tmp_out, *rm_out;
+ uint64_t first_3_bytes = 0;
struct rte_bbdev_op_turbo_enc *enc = &op->turbo_enc;
struct bblib_crc_request crc_req;
+ struct bblib_crc_response crc_resp;
struct bblib_turbo_encoder_request turbo_req;
struct bblib_turbo_encoder_response turbo_resp;
struct bblib_rate_match_dl_request rm_req;
struct bblib_rate_match_dl_response rm_resp;
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ uint64_t start_time;
+#else
+ RTE_SET_USED(q_stats);
+#endif
k_idx = compute_idx(k);
in = rte_pktmbuf_mtod_offset(m_in, uint8_t *, in_offset);
op->status |= 1 << RTE_BBDEV_DATA_ERROR;
return;
}
- /* copy the input to the temporary buffer to be able to extend
- * it by 3 CRC bytes
+ crc_req.data = in;
+ crc_req.len = k - 24;
+ /* Check if there is a room for CRC bits if not use
+ * the temporary buffer.
*/
- rte_memcpy(q->enc_in, in, (k - 24) >> 3);
- crc_req.data = q->enc_in;
- crc_req.len = (k - 24) >> 3;
- if (bblib_lte_crc24a_gen(&crc_req) == -1) {
- op->status |= 1 << RTE_BBDEV_CRC_ERROR;
- rte_bbdev_log(ERR, "CRC24a generation failed");
- return;
+ if (rte_pktmbuf_append(m_in, 3) == NULL) {
+ rte_memcpy(q->enc_in, in, (k - 24) >> 3);
+ in = q->enc_in;
+ } else {
+ /* Store 3 first bytes of next CB as they will be
+ * overwritten by CRC bytes. If it is the last CB then
+ * there is no point to store 3 next bytes and this
+ * if..else branch will be omitted.
+ */
+ first_3_bytes = *((uint64_t *)&in[(k - 32) >> 3]);
}
- in = q->enc_in;
+
+ crc_resp.data = in;
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ start_time = rte_rdtsc_precise();
+#endif
+ bblib_lte_crc24a_gen(&crc_req, &crc_resp);
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ q_stats->offload_time += rte_rdtsc_precise() - start_time;
+#endif
} else if (enc->op_flags & RTE_BBDEV_TURBO_CRC_24B_ATTACH) {
/* CRC24B */
ret = is_enc_input_valid(k - 24, k_idx, total_left);
op->status |= 1 << RTE_BBDEV_DATA_ERROR;
return;
}
- /* copy the input to the temporary buffer to be able to extend
- * it by 3 CRC bytes
+ crc_req.data = in;
+ crc_req.len = k - 24;
+ /* Check if there is a room for CRC bits if this is the last
+ * CB in TB. If not use temporary buffer.
*/
- rte_memcpy(q->enc_in, in, (k - 24) >> 3);
- crc_req.data = q->enc_in;
- crc_req.len = (k - 24) >> 3;
- if (bblib_lte_crc24b_gen(&crc_req) == -1) {
- op->status |= 1 << RTE_BBDEV_CRC_ERROR;
- rte_bbdev_log(ERR, "CRC24b generation failed");
- return;
+ if ((c - r == 1) && (rte_pktmbuf_append(m_in, 3) == NULL)) {
+ rte_memcpy(q->enc_in, in, (k - 24) >> 3);
+ in = q->enc_in;
+ } else if (c - r > 1) {
+ /* Store 3 first bytes of next CB as they will be
+ * overwritten by CRC bytes. If it is the last CB then
+ * there is no point to store 3 next bytes and this
+ * if..else branch will be omitted.
+ */
+ first_3_bytes = *((uint64_t *)&in[(k - 32) >> 3]);
}
- in = q->enc_in;
+
+ crc_resp.data = in;
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ start_time = rte_rdtsc_precise();
+#endif
+ bblib_lte_crc24b_gen(&crc_req, &crc_resp);
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ q_stats->offload_time += rte_rdtsc_precise() - start_time;
+#endif
} else {
ret = is_enc_input_valid(k, k_idx, total_left);
if (ret != 0) {
/* Each bit layer output from turbo encoder is (k+4) bits long, i.e.
* input length + 4 tail bits. That's (k/8) + 1 bytes after rounding up.
* So dst_data's length should be 3*(k/8) + 3 bytes.
+ * In Rate-matching bypass case outputs pointers passed to encoder
+ * (out0, out1 and out2) can directly point to addresses of output from
+ * turbo_enc entity.
*/
- out0 = q->enc_out;
- out1 = RTE_PTR_ADD(out0, (k >> 3) + 1);
- out2 = RTE_PTR_ADD(out1, (k >> 3) + 1);
+ if (enc->op_flags & RTE_BBDEV_TURBO_RATE_MATCH) {
+ out0 = q->enc_out;
+ out1 = RTE_PTR_ADD(out0, (k >> 3) + 1);
+ out2 = RTE_PTR_ADD(out1, (k >> 3) + 1);
+ } else {
+ out0 = (uint8_t *)rte_pktmbuf_append(m_out, (k >> 3) * 3 + 2);
+ if (out0 == NULL) {
+ op->status |= 1 << RTE_BBDEV_DATA_ERROR;
+ rte_bbdev_log(ERR,
+ "Too little space in output mbuf");
+ return;
+ }
+ enc->output.length += (k >> 3) * 3 + 2;
+ /* rte_bbdev_op_data.offset can be different than the
+ * offset of the appended bytes
+ */
+ out0 = rte_pktmbuf_mtod_offset(m_out, uint8_t *, out_offset);
+ out1 = rte_pktmbuf_mtod_offset(m_out, uint8_t *,
+ out_offset + (k >> 3) + 1);
+ out2 = rte_pktmbuf_mtod_offset(m_out, uint8_t *,
+ out_offset + 2 * ((k >> 3) + 1));
+ }
turbo_req.case_id = k_idx;
turbo_req.input_win = in;
turbo_resp.output_win_0 = out0;
turbo_resp.output_win_1 = out1;
turbo_resp.output_win_2 = out2;
+
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ start_time = rte_rdtsc_precise();
+#endif
+
if (bblib_turbo_encoder(&turbo_req, &turbo_resp) != 0) {
op->status |= 1 << RTE_BBDEV_DRV_ERROR;
rte_bbdev_log(ERR, "Turbo Encoder failed");
return;
}
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ q_stats->offload_time += rte_rdtsc_precise() - start_time;
+#endif
+
+ /* Restore 3 first bytes of next CB if they were overwritten by CRC*/
+ if (first_3_bytes != 0)
+ *((uint64_t *)&in[(k - 32) >> 3]) = first_3_bytes;
+
/* Rate-matching */
if (enc->op_flags & RTE_BBDEV_TURBO_RATE_MATCH) {
+ uint8_t mask_id;
+ /* Integer round up division by 8 */
+ uint16_t out_len = (e + 7) >> 3;
+ /* The mask array is indexed using E%8. E is an even number so
+ * there are only 4 possible values.
+ */
+ const uint8_t mask_out[] = {0xFF, 0xC0, 0xF0, 0xFC};
+
/* get output data starting address */
- rm_out = (uint8_t *)rte_pktmbuf_append(m_out, (e >> 3));
+ rm_out = (uint8_t *)rte_pktmbuf_append(m_out, out_len);
if (rm_out == NULL) {
op->status |= 1 << RTE_BBDEV_DATA_ERROR;
rte_bbdev_log(ERR,
rm_out = rte_pktmbuf_mtod_offset(m_out, uint8_t *, out_offset);
/* index of current code block */
- rm_req.r = cb_idx;
+ rm_req.r = r;
/* total number of code block */
rm_req.C = c;
/* For DL - 1, UL - 0 */
rm_req.tin1 = out1;
rm_req.tin2 = out2;
rm_resp.output = rm_out;
- rm_resp.OutputLen = (e >> 3);
+ rm_resp.OutputLen = out_len;
if (enc->op_flags & RTE_BBDEV_TURBO_RV_INDEX_BYPASS)
rm_req.bypass_rvidx = 1;
else
rm_req.bypass_rvidx = 0;
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ start_time = rte_rdtsc_precise();
+#endif
+
if (bblib_rate_match_dl(&rm_req, &rm_resp) != 0) {
op->status |= 1 << RTE_BBDEV_DRV_ERROR;
rte_bbdev_log(ERR, "Rate matching failed");
return;
}
+
+ /* SW fills an entire last byte even if E%8 != 0. Clear the
+ * superfluous data bits for consistency with HW device.
+ */
+ mask_id = (e & 7) >> 1;
+ rm_out[out_len - 1] &= mask_out[mask_id];
+
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ q_stats->offload_time += rte_rdtsc_precise() - start_time;
+#endif
+
enc->output.length += rm_resp.OutputLen;
} else {
/* Rate matching is bypassed */
tmp_out++;
}
*tmp_out = 0;
-
- /* copy shifted output to turbo_enc entity */
- out0 = (uint8_t *)rte_pktmbuf_append(m_out,
- (k >> 3) * 3 + 2);
- if (out0 == NULL) {
- op->status |= 1 << RTE_BBDEV_DATA_ERROR;
- rte_bbdev_log(ERR,
- "Too little space in output mbuf");
- return;
- }
- enc->output.length += (k >> 3) * 3 + 2;
- /* rte_bbdev_op_data.offset can be different than the
- * offset of the appended bytes
- */
- out0 = rte_pktmbuf_mtod_offset(m_out, uint8_t *,
- out_offset);
- rte_memcpy(out0, q->enc_out, (k >> 3) * 3 + 2);
}
}
static inline void
-enqueue_enc_one_op(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op)
+enqueue_enc_one_op(struct turbo_sw_queue *q, struct rte_bbdev_enc_op *op,
+ struct rte_bbdev_stats *queue_stats)
{
uint8_t c, r, crc24_bits = 0;
uint16_t k, ncb;
/* Clear op status */
op->status = 0;
- if (total_left > MAX_TB_SIZE >> 3) {
+ if (total_left > RTE_BBDEV_MAX_TB_SIZE >> 3) {
rte_bbdev_log(ERR, "TB size (%u) is too big, max: %d",
- total_left, MAX_TB_SIZE);
+ total_left, RTE_BBDEV_MAX_TB_SIZE);
op->status = 1 << RTE_BBDEV_DATA_ERROR;
return;
}
}
process_enc_cb(q, op, r, c, k, ncb, e, m_in,
- m_out, in_offset, out_offset, total_left);
+ m_out, in_offset, out_offset, total_left,
+ queue_stats);
/* Update total_left */
total_left -= (k - crc24_bits) >> 3;
/* Update offsets for next CBs (if exist) */
static inline uint16_t
enqueue_enc_all_ops(struct turbo_sw_queue *q, struct rte_bbdev_enc_op **ops,
- uint16_t nb_ops)
+ uint16_t nb_ops, struct rte_bbdev_stats *queue_stats)
{
uint16_t i;
+#ifdef RTE_BBDEV_OFFLOAD_COST
+ queue_stats->offload_time = 0;
+#endif
for (i = 0; i < nb_ops; ++i)
- enqueue_enc_one_op(q, ops[i]);
+ enqueue_enc_one_op(q, ops[i], queue_stats);
return rte_ring_enqueue_burst(q->processed_pkts, (void **)ops, nb_ops,
NULL);
const uint32_t d = k + 4;
const uint32_t kw = (ncb / 3);
const uint32_t nd = kw - d;
- const uint32_t r_subblock = kw / C_SUBBLOCK;
+ const uint32_t r_subblock = kw / RTE_BBDEV_C_SUBBLOCK;
/* Inter-column permutation pattern */
- const uint32_t P[C_SUBBLOCK] = {0, 16, 8, 24, 4, 20, 12, 28, 2, 18, 10,
- 26, 6, 22, 14, 30, 1, 17, 9, 25, 5, 21, 13, 29, 3, 19,
- 11, 27, 7, 23, 15, 31};
+ const uint32_t P[RTE_BBDEV_C_SUBBLOCK] = {0, 16, 8, 24, 4, 20, 12, 28,
+ 2, 18, 10, 26, 6, 22, 14, 30, 1, 17, 9, 25, 5, 21, 13,
+ 29, 3, 19, 11, 27, 7, 23, 15, 31};
in_idx = 0;
out_idx = 0;
}
/* Last interlaced row is different - its last byte is the only padding
- * byte. We can have from 2 up to 26 padding bytes (Nd) per sub-block.
+ * byte. We can have from 4 up to 28 padding bytes (Nd) per sub-block.
* After interlacing the 1st and 2nd parity sub-blocks we can have 0, 1
* or 2 padding bytes each time we make a step of 2 * R_SUBBLOCK bytes
* (moving to another column). 2nd parity sub-block uses the same
* 32nd (31+1) byte, then 64th etc. (step is C_SUBBLOCK == 32) and the
* last byte will be the first byte from the sub-block:
* (32 + 32 * (R_SUBBLOCK-1)) % Kw == Kw % Kw == 0. Nd can't be smaller
- * than 2 so we know that bytes with ids 0 and 1 must be the padding
- * bytes. The bytes from the 1st parity sub-block are the bytes from the
- * 31st column - Nd can't be greater than 26 so we are sure that there
- * are no padding bytes in 31st column.
+ * than 4 so we know that bytes with ids 0, 1, 2 and 3 must be the
+ * padding bytes. The bytes from the 1st parity sub-block are the bytes
+ * from the 31st column - Nd can't be greater than 28 so we are sure
+ * that there are no padding bytes in 31st column.
*/
rte_memcpy(&out[out_idx], &in[in_idx], 2 * r_subblock - 1);
}
rte_memcpy(&out[nd], in, d);
rte_memcpy(&out[nd + kpi + 64], &in[kpi], d);
- rte_memcpy(&out[nd + 2 * (kpi + 64)], &in[2 * kpi], d);
+ rte_memcpy(&out[(nd - 1) + 2 * (kpi + 64)], &in[2 * kpi], d);
}
static inline void
process_dec_cb(struct turbo_sw_queue *q, struct rte_bbdev_dec_op *op,
uint8_t c, uint16_t k, uint16_t kw, struct rte_mbuf *m_in,
struct rte_mbuf *m_out, uint16_t in_offset, uint16_t out_offset,
- bool check_crc_24b, uint16_t total_left)
+ bool check_crc_24b, uint16_t crc24_overlap, uint16_t total_left)
{
int ret;
int32_t k_idx;
adapter_resp.pharqout = q->adapter_output;
bblib_turbo_adapter_ul(&adapter_req, &adapter_resp);
- out = (uint8_t *)rte_pktmbuf_append(m_out, (k >> 3));
+ out = (uint8_t *)rte_pktmbuf_append(m_out, ((k - crc24_overlap) >> 3));
if (out == NULL) {
op->status |= 1 << RTE_BBDEV_DATA_ERROR;
rte_bbdev_log(ERR, "Too little space in output mbuf");
turbo_req.k = k;
turbo_req.k_idx = k_idx;
turbo_req.max_iter_num = dec->iter_max;
+ turbo_req.early_term_disable = !check_bit(dec->op_flags,
+ RTE_BBDEV_TURBO_EARLY_TERMINATION);
turbo_resp.ag_buf = q->ag;
turbo_resp.cb_buf = q->code_block;
turbo_resp.output = out;
{
uint8_t c, r = 0;
uint16_t kw, k = 0;
+ uint16_t crc24_overlap = 0;
struct rte_bbdev_op_turbo_dec *dec = &op->turbo_dec;
struct rte_mbuf *m_in = dec->input.data;
struct rte_mbuf *m_out = dec->hard_output.data;
c = 1;
}
+ if ((c > 1) && !check_bit(dec->op_flags,
+ RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP))
+ crc24_overlap = 24;
+
while (total_left > 0) {
if (dec->code_block_mode == 0)
k = (r < dec->tb_params.c_neg) ?
* where D is the size of each output from turbo encoder block
* (k + 4).
*/
- kw = RTE_ALIGN_CEIL(k + 4, C_SUBBLOCK) * 3;
+ kw = RTE_ALIGN_CEIL(k + 4, RTE_BBDEV_C_SUBBLOCK) * 3;
process_dec_cb(q, op, c, k, kw, m_in, m_out, in_offset,
out_offset, check_bit(dec->op_flags,
- RTE_BBDEV_TURBO_CRC_TYPE_24B), total_left);
- /* As a result of decoding we get Code Block with included
- * decoded CRC24 at the end of Code Block. Type of CRC24 is
- * specified by flag.
+ RTE_BBDEV_TURBO_CRC_TYPE_24B), crc24_overlap,
+ total_left);
+ /* To keep CRC24 attached to end of Code block, use
+ * RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP flag as it
+ * removed by default once verified.
*/
/* Update total_left */
total_left -= kw;
/* Update offsets for next CBs (if exist) */
in_offset += kw;
- out_offset += (k >> 3);
+ out_offset += ((k - crc24_overlap) >> 3);
r++;
}
if (total_left != 0) {
struct turbo_sw_queue *q = queue;
uint16_t nb_enqueued = 0;
- nb_enqueued = enqueue_enc_all_ops(q, ops, nb_ops);
+ nb_enqueued = enqueue_enc_all_ops(q, ops, nb_ops, &q_data->queue_stats);
q_data->queue_stats.enqueue_err_count += nb_ops - nb_enqueued;
q_data->queue_stats.enqueued_count += nb_enqueued;
RTE_PMD_REGISTER_PARAM_STRING(DRIVER_NAME,
TURBO_SW_MAX_NB_QUEUES_ARG"=<int> "
TURBO_SW_SOCKET_ID_ARG"=<int>");
+RTE_PMD_REGISTER_ALIAS(DRIVER_NAME, turbo_sw);
-RTE_INIT(null_bbdev_init_log);
-static void
-null_bbdev_init_log(void)
+RTE_INIT(turbo_sw_bbdev_init_log)
{
bbdev_turbo_sw_logtype = rte_log_register("pmd.bb.turbo_sw");
if (bbdev_turbo_sw_logtype >= 0)
Code Review / deb_dpdk.git / blobdiff