-/*-
- * This file is provided under a dual BSD/GPLv2 license. When using or
- * redistributing this file, you may do so under either license.
- *
- * BSD LICENSE
+/* SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0)
*
* Copyright 2013-2016 Freescale Semiconductor Inc.
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * * Neither the name of the above-listed copyright holders nor the
- * names of any contributors may be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * GPL LICENSE SUMMARY
- *
- * ALTERNATIVELY, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") as published by the Free Software
- * Foundation, either version 2 of that License or (at your option) any
- * later version.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
*/
#include <fsl_mc_sys.h>
#include <fsl_mc_cmd.h>
return mc_send_command(mc_io, &cmd);
}
+/**
+ * dpci_get_attributes() - Retrieve DPCI attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @attr: Returned object's attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
int dpci_get_attributes(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
return 0;
}
+/**
+ * dpci_get_peer_attributes() - Retrieve peer DPCI attributes.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @attr: Returned peer attributes
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_get_peer_attributes(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ struct dpci_peer_attr *attr)
+{
+ struct dpci_rsp_get_peer_attr *rsp_params;
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_GET_PEER_ATTR,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ rsp_params = (struct dpci_rsp_get_peer_attr *)cmd.params;
+ attr->peer_id = le32_to_cpu(rsp_params->id);
+ attr->num_of_priorities = rsp_params->num_of_priorities;
+
+ return 0;
+}
+
+/**
+ * dpci_get_link_state() - Retrieve the DPCI link state.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @up: Returned link state; returns '1' if link is up, '0' otherwise
+ *
+ * DPCI can be connected to another DPCI, together they
+ * create a 'link'. In order to use the DPCI Tx and Rx queues,
+ * both objects must be enabled.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_get_link_state(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ int *up)
+{
+ struct dpci_rsp_get_link_state *rsp_params;
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_GET_LINK_STATE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ rsp_params = (struct dpci_rsp_get_link_state *)cmd.params;
+ *up = dpci_get_field(rsp_params->up, UP);
+
+ return 0;
+}
+
+/**
+ * dpci_set_rx_queue() - Set Rx queue configuration
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @priority: Select the queue relative to number of
+ * priorities configured at DPCI creation; use
+ * DPCI_ALL_QUEUES to configure all Rx queues
+ * identically.
+ * @cfg: Rx queue configuration
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
int dpci_set_rx_queue(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token,
dpci_set_field(cmd_params->dest_type,
DEST_TYPE,
cfg->dest_cfg.dest_type);
+ dpci_set_field(cmd_params->dest_type,
+ ORDER_PRESERVATION,
+ cfg->order_preservation_en);
/* send command to mc*/
return mc_send_command(mc_io, &cmd);
return 0;
}
+
+/**
+ * dpci_set_opr() - Set Order Restoration configuration.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @index: The queue index
+ * @options: Configuration mode options
+ * can be OPR_OPT_CREATE or OPR_OPT_RETIRE
+ * @cfg: Configuration options for the OPR
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_set_opr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t index,
+ uint8_t options,
+ struct opr_cfg *cfg)
+{
+ struct dpci_cmd_set_opr *cmd_params;
+ struct mc_command cmd = { 0 };
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_SET_OPR,
+ cmd_flags,
+ token);
+ cmd_params = (struct dpci_cmd_set_opr *)cmd.params;
+ cmd_params->index = index;
+ cmd_params->options = options;
+ cmd_params->oloe = cfg->oloe;
+ cmd_params->oeane = cfg->oeane;
+ cmd_params->olws = cfg->olws;
+ cmd_params->oa = cfg->oa;
+ cmd_params->oprrws = cfg->oprrws;
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+/**
+ * dpci_get_opr() - Retrieve Order Restoration config and query.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPCI object
+ * @index: The queue index
+ * @cfg: Returned OPR configuration
+ * @qry: Returned OPR query
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpci_get_opr(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t index,
+ struct opr_cfg *cfg,
+ struct opr_qry *qry)
+{
+ struct dpci_rsp_get_opr *rsp_params;
+ struct dpci_cmd_get_opr *cmd_params;
+ struct mc_command cmd = { 0 };
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPCI_CMDID_GET_OPR,
+ cmd_flags,
+ token);
+ cmd_params = (struct dpci_cmd_get_opr *)cmd.params;
+ cmd_params->index = index;
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ rsp_params = (struct dpci_rsp_get_opr *)cmd.params;
+ cfg->oloe = rsp_params->oloe;
+ cfg->oeane = rsp_params->oeane;
+ cfg->olws = rsp_params->olws;
+ cfg->oa = rsp_params->oa;
+ cfg->oprrws = rsp_params->oprrws;
+ qry->rip = dpci_get_field(rsp_params->flags, RIP);
+ qry->enable = dpci_get_field(rsp_params->flags, OPR_ENABLE);
+ qry->nesn = le16_to_cpu(rsp_params->nesn);
+ qry->ndsn = le16_to_cpu(rsp_params->ndsn);
+ qry->ea_tseq = le16_to_cpu(rsp_params->ea_tseq);
+ qry->tseq_nlis = dpci_get_field(rsp_params->tseq_nlis, TSEQ_NLIS);
+ qry->ea_hseq = le16_to_cpu(rsp_params->ea_hseq);
+ qry->hseq_nlis = dpci_get_field(rsp_params->hseq_nlis, HSEQ_NLIS);
+ qry->ea_hptr = le16_to_cpu(rsp_params->ea_hptr);
+ qry->ea_tptr = le16_to_cpu(rsp_params->ea_tptr);
+ qry->opr_vid = le16_to_cpu(rsp_params->opr_vid);
+ qry->opr_id = le16_to_cpu(rsp_params->opr_id);
+
+ return 0;
+}