--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (c) 2016 NXP. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Freescale Semiconductor, Inc nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _DPAA2_HW_PVT_H_
+#define _DPAA2_HW_PVT_H_
+
+#include <mc/fsl_mc_sys.h>
+#include <fsl_qbman_portal.h>
+
+#ifndef false
+#define false 0
+#endif
+#ifndef true
+#define true 1
+#endif
+#define lower_32_bits(x) ((uint32_t)(x))
+#define upper_32_bits(x) ((uint32_t)(((x) >> 16) >> 16))
+
+#ifndef ETH_VLAN_HLEN
+#define ETH_VLAN_HLEN 4 /** < Vlan Header Length */
+#endif
+
+#define MAX_TX_RING_SLOTS 8
+ /** <Maximum number of slots available in TX ring*/
+
+#define DPAA2_DQRR_RING_SIZE 16
+ /** <Maximum number of slots available in RX ring*/
+
+#define MC_PORTAL_INDEX 0
+#define NUM_DPIO_REGIONS 2
+#define NUM_DQS_PER_QUEUE 2
+
+/* Maximum release/acquire from QBMAN */
+#define DPAA2_MBUF_MAX_ACQ_REL 7
+
+#define MAX_BPID 256
+#define DPAA2_MBUF_HW_ANNOTATION 64
+#define DPAA2_FD_PTA_SIZE 64
+
+#if (DPAA2_MBUF_HW_ANNOTATION + DPAA2_FD_PTA_SIZE) > RTE_PKTMBUF_HEADROOM
+#error "Annotation requirement is more than RTE_PKTMBUF_HEADROOM"
+#endif
+
+/* we will re-use the HEADROOM for annotation in RX */
+#define DPAA2_HW_BUF_RESERVE 0
+#define DPAA2_PACKET_LAYOUT_ALIGN 64 /*changing from 256 */
+
+struct dpaa2_dpio_dev {
+ TAILQ_ENTRY(dpaa2_dpio_dev) next;
+ /**< Pointer to Next device instance */
+ uint16_t index; /**< Index of a instance in the list */
+ rte_atomic16_t ref_count;
+ /**< How many thread contexts are sharing this.*/
+ struct fsl_mc_io *dpio; /** handle to DPIO portal object */
+ uint16_t token;
+ struct qbman_swp *sw_portal; /** SW portal object */
+ const struct qbman_result *dqrr[4];
+ /**< DQRR Entry for this SW portal */
+ void *mc_portal; /**< MC Portal for configuring this device */
+ uintptr_t qbman_portal_ce_paddr;
+ /**< Physical address of Cache Enabled Area */
+ uintptr_t ce_size; /**< Size of the CE region */
+ uintptr_t qbman_portal_ci_paddr;
+ /**< Physical address of Cache Inhibit Area */
+ uintptr_t ci_size; /**< Size of the CI region */
+ int32_t vfio_fd; /**< File descriptor received via VFIO */
+ int32_t hw_id; /**< An unique ID of this DPIO device instance */
+};
+
+struct dpaa2_dpbp_dev {
+ TAILQ_ENTRY(dpaa2_dpbp_dev) next;
+ /**< Pointer to Next device instance */
+ struct fsl_mc_io dpbp; /** handle to DPBP portal object */
+ uint16_t token;
+ rte_atomic16_t in_use;
+ uint32_t dpbp_id; /*HW ID for DPBP object */
+};
+
+struct queue_storage_info_t {
+ struct qbman_result *dq_storage[NUM_DQS_PER_QUEUE];
+};
+
+struct dpaa2_queue {
+ struct rte_mempool *mb_pool; /**< mbuf pool to populate RX ring. */
+ void *dev;
+ int32_t eventfd; /*!< Event Fd of this queue */
+ uint32_t fqid; /*!< Unique ID of this queue */
+ uint8_t tc_index; /*!< traffic class identifier */
+ uint16_t flow_id; /*!< To be used by DPAA2 frmework */
+ uint64_t rx_pkts;
+ uint64_t tx_pkts;
+ uint64_t err_pkts;
+ struct queue_storage_info_t *q_storage;
+};
+
+/*! Global MCP list */
+extern void *(*rte_mcp_ptr_list);
+
+/* Refer to Table 7-3 in SEC BG */
+struct qbman_fle {
+ uint32_t addr_lo;
+ uint32_t addr_hi;
+ uint32_t length;
+ /* FMT must be 00, MSB is final bit */
+ uint32_t fin_bpid_offset;
+ uint32_t frc;
+ uint32_t reserved[3]; /* Not used currently */
+};
+
+/*Macros to define operations on FD*/
+#define DPAA2_SET_FD_ADDR(fd, addr) do { \
+ fd->simple.addr_lo = lower_32_bits((uint64_t)(addr)); \
+ fd->simple.addr_hi = upper_32_bits((uint64_t)(addr)); \
+} while (0)
+#define DPAA2_SET_FD_LEN(fd, length) (fd)->simple.len = length
+#define DPAA2_SET_FD_BPID(fd, bpid) ((fd)->simple.bpid_offset |= bpid)
+#define DPAA2_SET_FD_IVP(fd) ((fd->simple.bpid_offset |= 0x00004000))
+#define DPAA2_SET_FD_OFFSET(fd, offset) \
+ ((fd->simple.bpid_offset |= (uint32_t)(offset) << 16))
+#define DPAA2_SET_FD_INTERNAL_JD(fd, len) fd->simple.frc = (0x80000000 | (len))
+#define DPAA2_SET_FD_FRC(fd, frc) fd->simple.frc = frc
+#define DPAA2_RESET_FD_CTRL(fd) (fd)->simple.ctrl = 0
+
+#define DPAA2_SET_FD_ASAL(fd, asal) ((fd)->simple.ctrl |= (asal << 16))
+#define DPAA2_SET_FD_FLC(fd, addr) do { \
+ fd->simple.flc_lo = lower_32_bits((uint64_t)(addr)); \
+ fd->simple.flc_hi = upper_32_bits((uint64_t)(addr)); \
+} while (0)
+#define DPAA2_SET_FLE_INTERNAL_JD(fle, len) (fle->frc = (0x80000000 | (len)))
+#define DPAA2_GET_FLE_ADDR(fle) \
+ (uint64_t)((((uint64_t)(fle->addr_hi)) << 32) + fle->addr_lo)
+#define DPAA2_SET_FLE_ADDR(fle, addr) do { \
+ fle->addr_lo = lower_32_bits((uint64_t)addr); \
+ fle->addr_hi = upper_32_bits((uint64_t)addr); \
+} while (0)
+#define DPAA2_SET_FLE_OFFSET(fle, offset) \
+ ((fle)->fin_bpid_offset |= (uint32_t)(offset) << 16)
+#define DPAA2_SET_FLE_BPID(fle, bpid) ((fle)->fin_bpid_offset |= (uint64_t)bpid)
+#define DPAA2_GET_FLE_BPID(fle, bpid) (fle->fin_bpid_offset & 0x000000ff)
+#define DPAA2_SET_FLE_FIN(fle) (fle->fin_bpid_offset |= (uint64_t)1 << 31)
+#define DPAA2_SET_FLE_IVP(fle) (((fle)->fin_bpid_offset |= 0x00004000))
+#define DPAA2_SET_FD_COMPOUND_FMT(fd) \
+ (fd->simple.bpid_offset |= (uint32_t)1 << 28)
+#define DPAA2_GET_FD_ADDR(fd) \
+((uint64_t)((((uint64_t)((fd)->simple.addr_hi)) << 32) + (fd)->simple.addr_lo))
+
+#define DPAA2_GET_FD_LEN(fd) ((fd)->simple.len)
+#define DPAA2_GET_FD_BPID(fd) (((fd)->simple.bpid_offset & 0x00003FFF))
+#define DPAA2_GET_FD_IVP(fd) ((fd->simple.bpid_offset & 0x00004000) >> 14)
+#define DPAA2_GET_FD_OFFSET(fd) (((fd)->simple.bpid_offset & 0x0FFF0000) >> 16)
+#define DPAA2_SET_FLE_SG_EXT(fle) (fle->fin_bpid_offset |= (uint64_t)1 << 29)
+#define DPAA2_IS_SET_FLE_SG_EXT(fle) \
+ ((fle->fin_bpid_offset & ((uint64_t)1 << 29)) ? 1 : 0)
+
+#define DPAA2_INLINE_MBUF_FROM_BUF(buf, meta_data_size) \
+ ((struct rte_mbuf *)((uint64_t)(buf) - (meta_data_size)))
+
+#define DPAA2_ASAL_VAL (DPAA2_MBUF_HW_ANNOTATION / 64)
+
+/* Only Enqueue Error responses will be
+ * pushed on FQID_ERR of Enqueue FQ
+ */
+#define DPAA2_EQ_RESP_ERR_FQ 0
+/* All Enqueue responses will be pushed on address
+ * set with qbman_eq_desc_set_response
+ */
+#define DPAA2_EQ_RESP_ALWAYS 1
+
+#ifdef RTE_LIBRTE_DPAA2_USE_PHYS_IOVA
+static void *dpaa2_mem_ptov(phys_addr_t paddr) __attribute__((unused));
+/* todo - this is costly, need to write a fast coversion routine */
+static void *dpaa2_mem_ptov(phys_addr_t paddr)
+{
+ const struct rte_memseg *memseg = rte_eal_get_physmem_layout();
+ int i;
+
+ for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) {
+ if (paddr >= memseg[i].phys_addr &&
+ (char *)paddr < (char *)memseg[i].phys_addr + memseg[i].len)
+ return (void *)(memseg[i].addr_64
+ + (paddr - memseg[i].phys_addr));
+ }
+ return NULL;
+}
+
+static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr) __attribute__((unused));
+static phys_addr_t dpaa2_mem_vtop(uint64_t vaddr)
+{
+ const struct rte_memseg *memseg = rte_eal_get_physmem_layout();
+ int i;
+
+ for (i = 0; i < RTE_MAX_MEMSEG && memseg[i].addr_64 != 0; i++) {
+ if (vaddr >= memseg[i].addr_64 &&
+ vaddr < memseg[i].addr_64 + memseg[i].len)
+ return memseg[i].phys_addr
+ + (vaddr - memseg[i].addr_64);
+ }
+ return (phys_addr_t)(NULL);
+}
+
+/**
+ * When we are using Physical addresses as IO Virtual Addresses,
+ * Need to call conversion routines dpaa2_mem_vtop & dpaa2_mem_ptov
+ * whereever required.
+ * These routines are called with help of below MACRO's
+ */
+
+#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_physaddr)
+#define DPAA2_OP_VADDR_TO_IOVA(op) (op->phys_addr)
+
+/**
+ * macro to convert Virtual address to IOVA
+ */
+#define DPAA2_VADDR_TO_IOVA(_vaddr) dpaa2_mem_vtop((uint64_t)(_vaddr))
+
+/**
+ * macro to convert IOVA to Virtual address
+ */
+#define DPAA2_IOVA_TO_VADDR(_iova) dpaa2_mem_ptov((phys_addr_t)(_iova))
+
+/**
+ * macro to convert modify the memory containing IOVA to Virtual address
+ */
+#define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type) \
+ {_mem = (_type)(dpaa2_mem_ptov((phys_addr_t)(_mem))); }
+
+#else /* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */
+
+#define DPAA2_MBUF_VADDR_TO_IOVA(mbuf) ((mbuf)->buf_addr)
+#define DPAA2_OP_VADDR_TO_IOVA(op) (op)
+#define DPAA2_VADDR_TO_IOVA(_vaddr) (_vaddr)
+#define DPAA2_IOVA_TO_VADDR(_iova) (_iova)
+#define DPAA2_MODIFY_IOVA_TO_VADDR(_mem, _type)
+
+#endif /* RTE_LIBRTE_DPAA2_USE_PHYS_IOVA */
+
+struct dpaa2_dpbp_dev *dpaa2_alloc_dpbp_dev(void);
+void dpaa2_free_dpbp_dev(struct dpaa2_dpbp_dev *dpbp);
+
+#endif
Code Review / deb_dpdk.git / blobdiff