#include <rte_log.h>
#include <rte_pci.h>
+#include <rte_bus_pci.h>
#include <rte_eal_memconfig.h>
#include <rte_malloc.h>
+#include <rte_vfio.h>
#include "eal_filesystem.h"
-#include "eal_pci_init.h"
-#include "eal_vfio.h"
-#include "eal_private.h"
+
+#include "pci_init.h"
+#include "private.h"
/**
* @file
/* get PCI BAR number where MSI-X interrupts are */
static int
-pci_vfio_get_msix_bar(int fd, int *msix_bar, uint32_t *msix_table_offset,
- uint32_t *msix_table_size)
+pci_vfio_get_msix_bar(int fd, struct pci_msix_table *msix_table)
{
int ret;
uint32_t reg;
return -1;
}
- *msix_bar = reg & RTE_PCI_MSIX_TABLE_BIR;
- *msix_table_offset = reg & RTE_PCI_MSIX_TABLE_OFFSET;
- *msix_table_size = 16 * (1 + (flags & RTE_PCI_MSIX_FLAGS_QSIZE));
+ msix_table->bar_index = reg & RTE_PCI_MSIX_TABLE_BIR;
+ msix_table->offset = reg & RTE_PCI_MSIX_TABLE_OFFSET;
+ msix_table->size =
+ 16 * (1 + (flags & RTE_PCI_MSIX_FLAGS_QSIZE));
return 0;
}
pci_vfio_setup_interrupts(struct rte_pci_device *dev, int vfio_dev_fd)
{
int i, ret, intr_idx;
+ enum rte_intr_mode intr_mode;
/* default to invalid index */
intr_idx = VFIO_PCI_NUM_IRQS;
+ /* Get default / configured intr_mode */
+ intr_mode = rte_eal_vfio_intr_mode();
+
/* get interrupt type from internal config (MSI-X by default, can be
* overridden from the command line
*/
- switch (internal_config.vfio_intr_mode) {
+ switch (intr_mode) {
case RTE_INTR_MODE_MSIX:
intr_idx = VFIO_PCI_MSIX_IRQ_INDEX;
break;
int fd = -1;
/* skip interrupt modes we don't want */
- if (internal_config.vfio_intr_mode != RTE_INTR_MODE_NONE &&
+ if (intr_mode != RTE_INTR_MODE_NONE &&
i != intr_idx)
continue;
/* if this vector cannot be used with eventfd, fail if we explicitly
* specified interrupt type, otherwise continue */
if ((irq.flags & VFIO_IRQ_INFO_EVENTFD) == 0) {
- if (internal_config.vfio_intr_mode != RTE_INTR_MODE_NONE) {
+ if (intr_mode != RTE_INTR_MODE_NONE) {
RTE_LOG(ERR, EAL,
" interrupt vector does not support eventfd!\n");
return -1;
switch (i) {
case VFIO_PCI_MSIX_IRQ_INDEX:
- internal_config.vfio_intr_mode = RTE_INTR_MODE_MSIX;
+ intr_mode = RTE_INTR_MODE_MSIX;
dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSIX;
break;
case VFIO_PCI_MSI_IRQ_INDEX:
- internal_config.vfio_intr_mode = RTE_INTR_MODE_MSI;
+ intr_mode = RTE_INTR_MODE_MSI;
dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSI;
break;
case VFIO_PCI_INTX_IRQ_INDEX:
- internal_config.vfio_intr_mode = RTE_INTR_MODE_LEGACY;
+ intr_mode = RTE_INTR_MODE_LEGACY;
dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_LEGACY;
break;
default:
return -1;
}
-/*
- * map the PCI resources of a PCI device in virtual memory (VFIO version).
- * primary and secondary processes follow almost exactly the same path
- */
-int
-pci_vfio_map_resource(struct rte_pci_device *dev)
+static int
+pci_vfio_is_ioport_bar(int vfio_dev_fd, int bar_index)
+{
+ uint32_t ioport_bar;
+ int ret;
+
+ ret = pread64(vfio_dev_fd, &ioport_bar, sizeof(ioport_bar),
+ VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX)
+ + PCI_BASE_ADDRESS_0 + bar_index*4);
+ if (ret != sizeof(ioport_bar)) {
+ RTE_LOG(ERR, EAL, "Cannot read command (%x) from config space!\n",
+ PCI_BASE_ADDRESS_0 + bar_index*4);
+ return -1;
+ }
+
+ return (ioport_bar & PCI_BASE_ADDRESS_SPACE_IO) != 0;
+}
+
+static int
+pci_rte_vfio_setup_device(struct rte_pci_device *dev, int vfio_dev_fd)
+{
+ if (pci_vfio_setup_interrupts(dev, vfio_dev_fd) != 0) {
+ RTE_LOG(ERR, EAL, "Error setting up interrupts!\n");
+ return -1;
+ }
+
+ /* set bus mastering for the device */
+ if (pci_vfio_set_bus_master(vfio_dev_fd, true)) {
+ RTE_LOG(ERR, EAL, "Cannot set up bus mastering!\n");
+ return -1;
+ }
+
+ /*
+ * Reset the device. If the device is not capable of resetting,
+ * then it updates errno as EINVAL.
+ */
+ if (ioctl(vfio_dev_fd, VFIO_DEVICE_RESET) && errno != EINVAL) {
+ RTE_LOG(ERR, EAL, "Unable to reset device! Error: %d (%s)\n",
+ errno, strerror(errno));
+ return -1;
+ }
+
+ return 0;
+}
+
+static int
+pci_vfio_mmap_bar(int vfio_dev_fd, struct mapped_pci_resource *vfio_res,
+ int bar_index, int additional_flags)
+{
+ struct memreg {
+ unsigned long offset, size;
+ } memreg[2] = {};
+ void *bar_addr;
+ struct pci_msix_table *msix_table = &vfio_res->msix_table;
+ struct pci_map *bar = &vfio_res->maps[bar_index];
+
+ if (bar->size == 0)
+ /* Skip this BAR */
+ return 0;
+
+ if (msix_table->bar_index == bar_index) {
+ /*
+ * VFIO will not let us map the MSI-X table,
+ * but we can map around it.
+ */
+ uint32_t table_start = msix_table->offset;
+ uint32_t table_end = table_start + msix_table->size;
+ table_end = (table_end + ~PAGE_MASK) & PAGE_MASK;
+ table_start &= PAGE_MASK;
+
+ if (table_start == 0 && table_end >= bar->size) {
+ /* Cannot map this BAR */
+ RTE_LOG(DEBUG, EAL, "Skipping BAR%d\n", bar_index);
+ bar->size = 0;
+ bar->addr = 0;
+ return 0;
+ }
+
+ memreg[0].offset = bar->offset;
+ memreg[0].size = table_start;
+ memreg[1].offset = bar->offset + table_end;
+ memreg[1].size = bar->size - table_end;
+
+ RTE_LOG(DEBUG, EAL,
+ "Trying to map BAR%d that contains the MSI-X "
+ "table. Trying offsets: "
+ "0x%04lx:0x%04lx, 0x%04lx:0x%04lx\n", bar_index,
+ memreg[0].offset, memreg[0].size,
+ memreg[1].offset, memreg[1].size);
+ } else {
+ memreg[0].offset = bar->offset;
+ memreg[0].size = bar->size;
+ }
+
+ /* reserve the address using an inaccessible mapping */
+ bar_addr = mmap(bar->addr, bar->size, 0, MAP_PRIVATE |
+ MAP_ANONYMOUS | additional_flags, -1, 0);
+ if (bar_addr != MAP_FAILED) {
+ void *map_addr = NULL;
+ if (memreg[0].size) {
+ /* actual map of first part */
+ map_addr = pci_map_resource(bar_addr, vfio_dev_fd,
+ memreg[0].offset,
+ memreg[0].size,
+ MAP_FIXED);
+ }
+
+ /* if there's a second part, try to map it */
+ if (map_addr != MAP_FAILED
+ && memreg[1].offset && memreg[1].size) {
+ void *second_addr = RTE_PTR_ADD(bar_addr,
+ memreg[1].offset -
+ (uintptr_t)bar->offset);
+ map_addr = pci_map_resource(second_addr,
+ vfio_dev_fd,
+ memreg[1].offset,
+ memreg[1].size,
+ MAP_FIXED);
+ }
+
+ if (map_addr == MAP_FAILED || !map_addr) {
+ munmap(bar_addr, bar->size);
+ bar_addr = MAP_FAILED;
+ RTE_LOG(ERR, EAL, "Failed to map pci BAR%d\n",
+ bar_index);
+ return -1;
+ }
+ } else {
+ RTE_LOG(ERR, EAL,
+ "Failed to create inaccessible mapping for BAR%d\n",
+ bar_index);
+ return -1;
+ }
+
+ bar->addr = bar_addr;
+ return 0;
+}
+
+static int
+pci_vfio_map_resource_primary(struct rte_pci_device *dev)
{
struct vfio_device_info device_info = { .argsz = sizeof(device_info) };
char pci_addr[PATH_MAX] = {0};
int vfio_dev_fd;
struct rte_pci_addr *loc = &dev->addr;
- int i, ret, msix_bar;
+ int i, ret;
struct mapped_pci_resource *vfio_res = NULL;
- struct mapped_pci_res_list *vfio_res_list = RTE_TAILQ_CAST(rte_vfio_tailq.head, mapped_pci_res_list);
+ struct mapped_pci_res_list *vfio_res_list =
+ RTE_TAILQ_CAST(rte_vfio_tailq.head, mapped_pci_res_list);
struct pci_map *maps;
- uint32_t msix_table_offset = 0;
- uint32_t msix_table_size = 0;
- uint32_t ioport_bar;
dev->intr_handle.fd = -1;
dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
snprintf(pci_addr, sizeof(pci_addr), PCI_PRI_FMT,
loc->domain, loc->bus, loc->devid, loc->function);
- if ((ret = vfio_setup_device(pci_get_sysfs_path(), pci_addr,
- &vfio_dev_fd, &device_info)))
+ ret = rte_vfio_setup_device(rte_pci_get_sysfs_path(), pci_addr,
+ &vfio_dev_fd, &device_info);
+ if (ret)
return ret;
- /* get MSI-X BAR, if any (we have to know where it is because we can't
- * easily mmap it when using VFIO) */
- msix_bar = -1;
- ret = pci_vfio_get_msix_bar(vfio_dev_fd, &msix_bar,
- &msix_table_offset, &msix_table_size);
- if (ret < 0) {
- RTE_LOG(ERR, EAL, " %s cannot get MSI-X BAR number!\n", pci_addr);
- close(vfio_dev_fd);
- return -1;
+ /* allocate vfio_res and get region info */
+ vfio_res = rte_zmalloc("VFIO_RES", sizeof(*vfio_res), 0);
+ if (vfio_res == NULL) {
+ RTE_LOG(ERR, EAL,
+ "%s(): cannot store uio mmap details\n", __func__);
+ goto err_vfio_dev_fd;
}
+ memcpy(&vfio_res->pci_addr, &dev->addr, sizeof(vfio_res->pci_addr));
- /* if we're in a primary process, allocate vfio_res and get region info */
- if (internal_config.process_type == RTE_PROC_PRIMARY) {
- vfio_res = rte_zmalloc("VFIO_RES", sizeof(*vfio_res), 0);
- if (vfio_res == NULL) {
- RTE_LOG(ERR, EAL,
- "%s(): cannot store uio mmap details\n", __func__);
- close(vfio_dev_fd);
- return -1;
- }
- memcpy(&vfio_res->pci_addr, &dev->addr, sizeof(vfio_res->pci_addr));
-
- /* get number of registers (up to BAR5) */
- vfio_res->nb_maps = RTE_MIN((int) device_info.num_regions,
- VFIO_PCI_BAR5_REGION_INDEX + 1);
- } else {
- /* if we're in a secondary process, just find our tailq entry */
- TAILQ_FOREACH(vfio_res, vfio_res_list, next) {
- if (rte_eal_compare_pci_addr(&vfio_res->pci_addr,
- &dev->addr))
- continue;
- break;
- }
- /* if we haven't found our tailq entry, something's wrong */
- if (vfio_res == NULL) {
- RTE_LOG(ERR, EAL, " %s cannot find TAILQ entry for PCI device!\n",
- pci_addr);
- close(vfio_dev_fd);
- return -1;
- }
- }
+ /* get number of registers (up to BAR5) */
+ vfio_res->nb_maps = RTE_MIN((int) device_info.num_regions,
+ VFIO_PCI_BAR5_REGION_INDEX + 1);
/* map BARs */
maps = vfio_res->maps;
+ vfio_res->msix_table.bar_index = -1;
+ /* get MSI-X BAR, if any (we have to know where it is because we can't
+ * easily mmap it when using VFIO)
+ */
+ ret = pci_vfio_get_msix_bar(vfio_dev_fd, &vfio_res->msix_table);
+ if (ret < 0) {
+ RTE_LOG(ERR, EAL, " %s cannot get MSI-X BAR number!\n",
+ pci_addr);
+ goto err_vfio_dev_fd;
+ }
+
for (i = 0; i < (int) vfio_res->nb_maps; i++) {
struct vfio_region_info reg = { .argsz = sizeof(reg) };
void *bar_addr;
- struct memreg {
- unsigned long offset, size;
- } memreg[2] = {};
reg.index = i;
ret = ioctl(vfio_dev_fd, VFIO_DEVICE_GET_REGION_INFO, ®);
-
if (ret) {
RTE_LOG(ERR, EAL, " %s cannot get device region info "
"error %i (%s)\n", pci_addr, errno, strerror(errno));
- close(vfio_dev_fd);
- if (internal_config.process_type == RTE_PROC_PRIMARY)
- rte_free(vfio_res);
- return -1;
+ goto err_vfio_res;
}
/* chk for io port region */
- ret = pread64(vfio_dev_fd, &ioport_bar, sizeof(ioport_bar),
- VFIO_GET_REGION_ADDR(VFIO_PCI_CONFIG_REGION_INDEX)
- + PCI_BASE_ADDRESS_0 + i*4);
-
- if (ret != sizeof(ioport_bar)) {
- RTE_LOG(ERR, EAL,
- "Cannot read command (%x) from config space!\n",
- PCI_BASE_ADDRESS_0 + i*4);
- return -1;
- }
-
- if (ioport_bar & PCI_BASE_ADDRESS_SPACE_IO) {
- RTE_LOG(INFO, EAL,
- "Ignore mapping IO port bar(%d) addr: %x\n",
- i, ioport_bar);
+ ret = pci_vfio_is_ioport_bar(vfio_dev_fd, i);
+ if (ret < 0)
+ goto err_vfio_res;
+ else if (ret) {
+ RTE_LOG(INFO, EAL, "Ignore mapping IO port bar(%d)\n",
+ i);
continue;
}
if ((reg.flags & VFIO_REGION_INFO_FLAG_MMAP) == 0)
continue;
- if (i == msix_bar) {
- /*
- * VFIO will not let us map the MSI-X table,
- * but we can map around it.
- */
- uint32_t table_start = msix_table_offset;
- uint32_t table_end = table_start + msix_table_size;
- table_end = (table_end + ~PAGE_MASK) & PAGE_MASK;
- table_start &= PAGE_MASK;
-
- if (table_start == 0 && table_end >= reg.size) {
- /* Cannot map this BAR */
- RTE_LOG(DEBUG, EAL, "Skipping BAR %d\n", i);
- continue;
- } else {
- memreg[0].offset = reg.offset;
- memreg[0].size = table_start;
- memreg[1].offset = reg.offset + table_end;
- memreg[1].size = reg.size - table_end;
-
- RTE_LOG(DEBUG, EAL,
- "Trying to map BAR %d that contains the MSI-X "
- "table. Trying offsets: "
- "0x%04lx:0x%04lx, 0x%04lx:0x%04lx\n", i,
- memreg[0].offset, memreg[0].size,
- memreg[1].offset, memreg[1].size);
- }
- } else {
- memreg[0].offset = reg.offset;
- memreg[0].size = reg.size;
- }
+ /* try mapping somewhere close to the end of hugepages */
+ if (pci_map_addr == NULL)
+ pci_map_addr = pci_find_max_end_va();
- /* try to figure out an address */
- if (internal_config.process_type == RTE_PROC_PRIMARY) {
- /* try mapping somewhere close to the end of hugepages */
- if (pci_map_addr == NULL)
- pci_map_addr = pci_find_max_end_va();
+ bar_addr = pci_map_addr;
+ pci_map_addr = RTE_PTR_ADD(bar_addr, (size_t) reg.size);
- bar_addr = pci_map_addr;
- pci_map_addr = RTE_PTR_ADD(bar_addr, (size_t) reg.size);
- } else {
- bar_addr = maps[i].addr;
+ maps[i].addr = bar_addr;
+ maps[i].offset = reg.offset;
+ maps[i].size = reg.size;
+ maps[i].path = NULL; /* vfio doesn't have per-resource paths */
+
+ ret = pci_vfio_mmap_bar(vfio_dev_fd, vfio_res, i, 0);
+ if (ret < 0) {
+ RTE_LOG(ERR, EAL, " %s mapping BAR%i failed: %s\n",
+ pci_addr, i, strerror(errno));
+ goto err_vfio_res;
}
- /* reserve the address using an inaccessible mapping */
- bar_addr = mmap(bar_addr, reg.size, 0, MAP_PRIVATE |
- MAP_ANONYMOUS, -1, 0);
- if (bar_addr != MAP_FAILED) {
- void *map_addr = NULL;
- if (memreg[0].size) {
- /* actual map of first part */
- map_addr = pci_map_resource(bar_addr, vfio_dev_fd,
- memreg[0].offset,
- memreg[0].size,
- MAP_FIXED);
- }
+ dev->mem_resource[i].addr = maps[i].addr;
+ }
- /* if there's a second part, try to map it */
- if (map_addr != MAP_FAILED
- && memreg[1].offset && memreg[1].size) {
- void *second_addr = RTE_PTR_ADD(bar_addr,
- memreg[1].offset -
- (uintptr_t)reg.offset);
- map_addr = pci_map_resource(second_addr,
- vfio_dev_fd, memreg[1].offset,
- memreg[1].size,
- MAP_FIXED);
- }
+ if (pci_rte_vfio_setup_device(dev, vfio_dev_fd) < 0) {
+ RTE_LOG(ERR, EAL, " %s setup device failed\n", pci_addr);
+ goto err_vfio_res;
+ }
- if (map_addr == MAP_FAILED || !map_addr) {
- munmap(bar_addr, reg.size);
- bar_addr = MAP_FAILED;
- }
- }
+ TAILQ_INSERT_TAIL(vfio_res_list, vfio_res, next);
- if (bar_addr == MAP_FAILED ||
- (internal_config.process_type == RTE_PROC_SECONDARY &&
- bar_addr != maps[i].addr)) {
- RTE_LOG(ERR, EAL, " %s mapping BAR%i failed: %s\n", pci_addr, i,
- strerror(errno));
- close(vfio_dev_fd);
- if (internal_config.process_type == RTE_PROC_PRIMARY)
- rte_free(vfio_res);
- return -1;
- }
+ return 0;
+err_vfio_res:
+ rte_free(vfio_res);
+err_vfio_dev_fd:
+ close(vfio_dev_fd);
+ return -1;
+}
- maps[i].addr = bar_addr;
- maps[i].offset = reg.offset;
- maps[i].size = reg.size;
- maps[i].path = NULL; /* vfio doesn't have per-resource paths */
- dev->mem_resource[i].addr = bar_addr;
+static int
+pci_vfio_map_resource_secondary(struct rte_pci_device *dev)
+{
+ struct vfio_device_info device_info = { .argsz = sizeof(device_info) };
+ char pci_addr[PATH_MAX] = {0};
+ int vfio_dev_fd;
+ struct rte_pci_addr *loc = &dev->addr;
+ int i, ret;
+ struct mapped_pci_resource *vfio_res = NULL;
+ struct mapped_pci_res_list *vfio_res_list =
+ RTE_TAILQ_CAST(rte_vfio_tailq.head, mapped_pci_res_list);
+
+ struct pci_map *maps;
+
+ dev->intr_handle.fd = -1;
+ dev->intr_handle.type = RTE_INTR_HANDLE_UNKNOWN;
+
+ /* store PCI address string */
+ snprintf(pci_addr, sizeof(pci_addr), PCI_PRI_FMT,
+ loc->domain, loc->bus, loc->devid, loc->function);
+
+ ret = rte_vfio_setup_device(rte_pci_get_sysfs_path(), pci_addr,
+ &vfio_dev_fd, &device_info);
+ if (ret)
+ return ret;
+
+ /* if we're in a secondary process, just find our tailq entry */
+ TAILQ_FOREACH(vfio_res, vfio_res_list, next) {
+ if (rte_pci_addr_cmp(&vfio_res->pci_addr,
+ &dev->addr))
+ continue;
+ break;
+ }
+ /* if we haven't found our tailq entry, something's wrong */
+ if (vfio_res == NULL) {
+ RTE_LOG(ERR, EAL, " %s cannot find TAILQ entry for PCI device!\n",
+ pci_addr);
+ goto err_vfio_dev_fd;
}
- /* if secondary process, do not set up interrupts */
- if (internal_config.process_type == RTE_PROC_PRIMARY) {
- if (pci_vfio_setup_interrupts(dev, vfio_dev_fd) != 0) {
- RTE_LOG(ERR, EAL, " %s error setting up interrupts!\n", pci_addr);
- close(vfio_dev_fd);
- rte_free(vfio_res);
- return -1;
- }
+ /* map BARs */
+ maps = vfio_res->maps;
- /* set bus mastering for the device */
- if (pci_vfio_set_bus_master(vfio_dev_fd, true)) {
- RTE_LOG(ERR, EAL, " %s cannot set up bus mastering!\n", pci_addr);
- close(vfio_dev_fd);
- rte_free(vfio_res);
- return -1;
+ for (i = 0; i < (int) vfio_res->nb_maps; i++) {
+ ret = pci_vfio_mmap_bar(vfio_dev_fd, vfio_res, i, MAP_FIXED);
+ if (ret < 0) {
+ RTE_LOG(ERR, EAL, " %s mapping BAR%i failed: %s\n",
+ pci_addr, i, strerror(errno));
+ goto err_vfio_dev_fd;
}
- /* Reset the device */
- ioctl(vfio_dev_fd, VFIO_DEVICE_RESET);
+ dev->mem_resource[i].addr = maps[i].addr;
}
- if (internal_config.process_type == RTE_PROC_PRIMARY)
- TAILQ_INSERT_TAIL(vfio_res_list, vfio_res, next);
-
return 0;
+err_vfio_dev_fd:
+ close(vfio_dev_fd);
+ return -1;
+}
+
+/*
+ * map the PCI resources of a PCI device in virtual memory (VFIO version).
+ * primary and secondary processes follow almost exactly the same path
+ */
+int
+pci_vfio_map_resource(struct rte_pci_device *dev)
+{
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ return pci_vfio_map_resource_primary(dev);
+ else
+ return pci_vfio_map_resource_secondary(dev);
}
int
return -1;
}
- ret = vfio_release_device(pci_get_sysfs_path(), pci_addr,
+ ret = rte_vfio_release_device(rte_pci_get_sysfs_path(), pci_addr,
dev->intr_handle.vfio_dev_fd);
if (ret < 0) {
RTE_LOG(ERR, EAL,
return -1;
}
-int
-pci_vfio_enable(void)
-{
- return vfio_enable("vfio_pci");
-}
-
int
pci_vfio_is_enabled(void)
{
- return vfio_is_enabled("vfio_pci");
+ return rte_vfio_is_enabled("vfio_pci");
}
#endif
Code Review / deb_dpdk.git / blobdiff