o->execute = exec;
o->get = get;
- ECORE_MSG("Setup the execution queue with the chunk length of %d",
+ ECORE_MSG(sc, "Setup the execution queue with the chunk length of %d",
exe_len);
}
static void ecore_exe_queue_free_elem(struct bnx2x_softc *sc __rte_unused,
struct ecore_exeq_elem *elem)
{
- ECORE_MSG("Deleting an exe_queue element");
+ ECORE_MSG(sc, "Deleting an exe_queue element");
ECORE_FREE(sc, elem, sizeof(*elem));
}
/* Check if this request is ok */
rc = o->validate(sc, o->owner, elem);
if (rc) {
- ECORE_MSG("Preamble failed: %d", rc);
+ ECORE_MSG(sc, "Preamble failed: %d", rc);
goto free_and_exit;
}
}
*/
if (!ECORE_LIST_IS_EMPTY(&o->pending_comp)) {
if (ECORE_TEST_BIT(RAMROD_DRV_CLR_ONLY, ramrod_flags)) {
- ECORE_MSG
- ("RAMROD_DRV_CLR_ONLY requested: resetting a pending_comp list");
+ ECORE_MSG(sc,
+ "RAMROD_DRV_CLR_ONLY requested: resetting a pending_comp list");
__ecore_exe_queue_reset_pending(sc, o);
} else {
return ECORE_PENDING;
bnx2x_softc *sc
__rte_unused)
{
- ECORE_MSG("Allocating a new exe_queue element");
+ ECORE_MSG(sc, "Allocating a new exe_queue element");
return ECORE_ZALLOC(sizeof(struct ecore_exeq_elem), GFP_ATOMIC, sc);
}
if (CHIP_REV_IS_EMUL(sc))
cnt *= 20;
- ECORE_MSG("waiting for state to become %d", state);
+ ECORE_MSG(sc, "waiting for state to become %d", state);
ECORE_MIGHT_SLEEP();
while (cnt--) {
bnx2x_intr_legacy(sc, 1);
if (!ECORE_TEST_BIT(state, pstate)) {
#ifdef ECORE_STOP_ON_ERROR
- ECORE_MSG("exit (cnt %d)", 5000 - cnt);
+ ECORE_MSG(sc, "exit (cnt %d)", 5000 - cnt);
#endif
return ECORE_SUCCESS;
}
}
/* timeout! */
- PMD_DRV_LOG(ERR, "timeout waiting for state %d", state);
+ PMD_DRV_LOG(ERR, sc, "timeout waiting for state %d", state);
#ifdef ECORE_STOP_ON_ERROR
ecore_panic();
#endif
struct ecore_vlan_mac_obj *o)
{
if (o->head_reader) {
- ECORE_MSG("vlan_mac_lock writer - There are readers; Busy");
+ ECORE_MSG(sc, "vlan_mac_lock writer - There are readers; Busy");
return ECORE_BUSY;
}
- ECORE_MSG("vlan_mac_lock writer - Taken");
+ ECORE_MSG(sc, "vlan_mac_lock writer - Taken");
return ECORE_SUCCESS;
}
int rc;
unsigned long ramrod_flags = o->saved_ramrod_flags;
- ECORE_MSG("vlan_mac_lock execute pending command with ramrod flags %lu",
+ ECORE_MSG(sc, "vlan_mac_lock execute pending command with ramrod flags %lu",
ramrod_flags);
o->head_exe_request = FALSE;
o->saved_ramrod_flags = 0;
rc = ecore_exe_queue_step(sc, &o->exe_queue, &ramrod_flags);
if (rc != ECORE_SUCCESS) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"execution of pending commands failed with rc %d",
rc);
#ifdef ECORE_STOP_ON_ERROR
{
o->head_exe_request = TRUE;
o->saved_ramrod_flags = ramrod_flags;
- ECORE_MSG("Placing pending execution with ramrod flags %lu",
+ ECORE_MSG(sc, "Placing pending execution with ramrod flags %lu",
ramrod_flags);
}
* executed. If so, execute again. [Ad infinitum]
*/
while (o->head_exe_request) {
- ECORE_MSG
- ("vlan_mac_lock - writer release encountered a pending request");
+ ECORE_MSG(sc,
+ "vlan_mac_lock - writer release encountered a pending request");
__ecore_vlan_mac_h_exec_pending(sc, o);
}
}
{
/* If we got here, we're holding lock --> no WRITER exists */
o->head_reader++;
- ECORE_MSG("vlan_mac_lock - locked reader - number %d", o->head_reader);
+ ECORE_MSG(sc,
+ "vlan_mac_lock - locked reader - number %d", o->head_reader);
return ECORE_SUCCESS;
}
struct ecore_vlan_mac_obj *o)
{
if (!o->head_reader) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"Need to release vlan mac reader lock, but lock isn't taken");
#ifdef ECORE_STOP_ON_ERROR
ecore_panic();
#endif
} else {
o->head_reader--;
- PMD_DRV_LOG(INFO,
+ PMD_DRV_LOG(INFO, sc,
"vlan_mac_lock - decreased readers to %d",
o->head_reader);
}
* was last - if so we need to execute the command.
*/
if (!o->head_reader && o->head_exe_request) {
- PMD_DRV_LOG(INFO,
+ PMD_DRV_LOG(INFO, sc,
"vlan_mac_lock - reader release encountered a pending request");
/* Writer release will do the trick */
uint8_t *next = base;
int counter = 0, read_lock;
- ECORE_MSG("get_n_elements - taking vlan_mac_lock (reader)");
+ ECORE_MSG(sc, "get_n_elements - taking vlan_mac_lock (reader)");
read_lock = ecore_vlan_mac_h_read_lock(sc, o);
if (read_lock != ECORE_SUCCESS)
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"get_n_elements failed to get vlan mac reader lock; Access without lock");
/* traverse list */
if (counter < n) {
ECORE_MEMCPY(next, &pos->u, size);
counter++;
- ECORE_MSG
- ("copied element number %d to address %p element was:",
+ ECORE_MSG
+ (sc, "copied element number %d to address %p element was:",
counter, next);
next += stride + size;
}
}
if (read_lock == ECORE_SUCCESS) {
- ECORE_MSG("get_n_elements - releasing vlan_mac_lock (reader)");
+ ECORE_MSG(sc, "get_n_elements - releasing vlan_mac_lock (reader)");
ecore_vlan_mac_h_read_unlock(sc, o);
}
{
struct ecore_vlan_mac_registry_elem *pos;
- ECORE_MSG("Checking MAC %02x:%02x:%02x:%02x:%02x:%02x for ADD command",
+ ECORE_MSG(sc, "Checking MAC %02x:%02x:%02x:%02x:%02x:%02x for ADD command",
data->mac.mac[0], data->mac.mac[1], data->mac.mac[2],
data->mac.mac[3], data->mac.mac[4], data->mac.mac[5]);
{
struct ecore_vlan_mac_registry_elem *pos;
- ECORE_MSG("Checking MAC %02x:%02x:%02x:%02x:%02x:%02x for DEL command",
+ ECORE_MSG(sc, "Checking MAC %02x:%02x:%02x:%02x:%02x:%02x for DEL command",
data->mac.mac[0], data->mac.mac[1], data->mac.mac[2],
data->mac.mac[3], data->mac.mac[4], data->mac.mac[5]);
if (index > ECORE_LLH_CAM_MAX_PF_LINE)
return;
- ECORE_MSG("Going to %s LLH configuration at entry %d",
+ ECORE_MSG(sc, "Going to %s LLH configuration at entry %d",
(add ? "ADD" : "DELETE"), index);
if (add) {
ecore_vlan_mac_set_cmd_hdr_e2(o, add, CLASSIFY_RULE_OPCODE_MAC,
&rule_entry->mac.header);
- ECORE_MSG("About to %s MAC %02x:%02x:%02x:%02x:%02x:%02x for Queue %d",
+ ECORE_MSG(sc, "About to %s MAC %02x:%02x:%02x:%02x:%02x:%02x for Queue %d",
(add ? "add" : "delete"), mac[0], mac[1], mac[2], mac[3],
mac[4], mac[5], raw->cl_id);
ecore_vlan_mac_set_cfg_entry_e1x(o, add, opcode, mac, vlan_id,
cfg_entry);
- ECORE_MSG("%s MAC %02x:%02x:%02x:%02x:%02x:%02x CLID %d CAM offset %d",
+ ECORE_MSG(sc, "%s MAC %02x:%02x:%02x:%02x:%02x:%02x CLID %d CAM offset %d",
(add ? "setting" : "clearing"),
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
o->raw.cl_id, cam_offset);
/* Check the registry */
rc = o->check_add(sc, o, &elem->cmd_data.vlan_mac.u);
if (rc) {
- ECORE_MSG
- ("ADD command is not allowed considering current registry state.");
+ ECORE_MSG(sc,
+ "ADD command is not allowed considering current registry state.");
return rc;
}
* MAC/VLAN/VLAN-MAC. Return an error if there is.
*/
if (exeq->get(exeq, elem)) {
- ECORE_MSG("There is a pending ADD command already");
+ ECORE_MSG(sc, "There is a pending ADD command already");
return ECORE_EXISTS;
}
*/
pos = o->check_del(sc, o, &elem->cmd_data.vlan_mac.u);
if (!pos) {
- ECORE_MSG
- ("DEL command is not allowed considering current registry state");
+ ECORE_MSG(sc,
+ "DEL command is not allowed considering current registry state");
return ECORE_EXISTS;
}
/* Check for MOVE commands */
query_elem.cmd_data.vlan_mac.cmd = ECORE_VLAN_MAC_MOVE;
if (exeq->get(exeq, &query_elem)) {
- PMD_DRV_LOG(ERR, "There is a pending MOVE command already");
+ PMD_DRV_LOG(ERR, sc, "There is a pending MOVE command already");
return ECORE_INVAL;
}
/* Check for DEL commands */
if (exeq->get(exeq, elem)) {
- ECORE_MSG("There is a pending DEL command already");
+ ECORE_MSG(sc, "There is a pending DEL command already");
return ECORE_EXISTS;
}
if (!(ECORE_TEST_BIT(ECORE_DONT_CONSUME_CAM_CREDIT,
&elem->cmd_data.vlan_mac.vlan_mac_flags) ||
o->put_credit(o))) {
- PMD_DRV_LOG(ERR, "Failed to return a credit");
+ PMD_DRV_LOG(ERR, sc, "Failed to return a credit");
return ECORE_INVAL;
}
* state.
*/
if (!src_o->check_move(sc, src_o, dest_o, &elem->cmd_data.vlan_mac.u)) {
- ECORE_MSG
- ("MOVE command is not allowed considering current registry state");
+ ECORE_MSG(sc,
+ "MOVE command is not allowed considering current registry state");
return ECORE_INVAL;
}
/* Check DEL on source */
query_elem.cmd_data.vlan_mac.cmd = ECORE_VLAN_MAC_DEL;
if (src_exeq->get(src_exeq, &query_elem)) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"There is a pending DEL command on the source queue already");
return ECORE_INVAL;
}
/* Check MOVE on source */
if (src_exeq->get(src_exeq, elem)) {
- ECORE_MSG("There is a pending MOVE command already");
+ ECORE_MSG(sc, "There is a pending MOVE command already");
return ECORE_EXISTS;
}
/* Check ADD on destination */
query_elem.cmd_data.vlan_mac.cmd = ECORE_VLAN_MAC_ADD;
if (dest_exeq->get(dest_exeq, &query_elem)) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"There is a pending ADD command on the destination queue already");
return ECORE_INVAL;
}
ECORE_SPIN_LOCK_BH(&o->exe_queue.lock);
- ECORE_MSG("vlan_mac_execute_step - trying to take writer lock");
+ ECORE_MSG(sc, "vlan_mac_execute_step - trying to take writer lock");
rc = __ecore_vlan_mac_h_write_trylock(sc, o);
if (rc != ECORE_SUCCESS) {
&pos->cmd_data.vlan_mac.vlan_mac_flags)) {
if ((query.cmd_data.vlan_mac.cmd ==
ECORE_VLAN_MAC_ADD) && !o->put_credit(o)) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"Failed to return the credit for the optimized ADD command");
return ECORE_INVAL;
} else if (!o->get_credit(o)) { /* VLAN_MAC_DEL */
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"Failed to recover the credit from the optimized DEL command");
return ECORE_INVAL;
}
}
- ECORE_MSG("Optimizing %s command",
+ ECORE_MSG(sc, "Optimizing %s command",
(elem->cmd_data.vlan_mac.cmd == ECORE_VLAN_MAC_ADD) ?
"ADD" : "DEL");
return ECORE_INVAL;
}
- ECORE_MSG("Got cam offset %d", reg_elem->cam_offset);
+ ECORE_MSG(sc, "Got cam offset %d", reg_elem->cam_offset);
/* Set a VLAN-MAC data */
ECORE_MEMCPY(®_elem->u, &elem->cmd_data.vlan_mac.u,
rc = ECORE_PENDING;
if (ECORE_TEST_BIT(RAMROD_DRV_CLR_ONLY, ramrod_flags)) {
- ECORE_MSG
- ("RAMROD_DRV_CLR_ONLY requested: clearing a pending bit.");
+ ECORE_MSG(sc,
+ "RAMROD_DRV_CLR_ONLY requested: clearing a pending bit.");
raw->clear_pending(raw);
}
*vlan_mac_flags) {
rc = exeq->remove(sc, exeq->owner, exeq_pos);
if (rc) {
- PMD_DRV_LOG(ERR, "Failed to remove command");
+ PMD_DRV_LOG(ERR, sc, "Failed to remove command");
ECORE_SPIN_UNLOCK_BH(&exeq->lock);
return rc;
}
ECORE_CLEAR_BIT_NA(RAMROD_EXEC, &p.ramrod_flags);
ECORE_CLEAR_BIT_NA(RAMROD_CONT, &p.ramrod_flags);
- ECORE_MSG("vlan_mac_del_all -- taking vlan_mac_lock (reader)");
+ ECORE_MSG(sc, "vlan_mac_del_all -- taking vlan_mac_lock (reader)");
read_lock = ecore_vlan_mac_h_read_lock(sc, o);
if (read_lock != ECORE_SUCCESS)
return read_lock;
ECORE_MEMCPY(&p.user_req.u, &pos->u, sizeof(pos->u));
rc = ecore_config_vlan_mac(sc, &p);
if (rc < 0) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"Failed to add a new DEL command");
ecore_vlan_mac_h_read_unlock(sc, o);
return rc;
}
}
- ECORE_MSG("vlan_mac_del_all -- releasing vlan_mac_lock (reader)");
+ ECORE_MSG(sc, "vlan_mac_del_all -- releasing vlan_mac_lock (reader)");
ecore_vlan_mac_h_read_unlock(sc, o);
p.ramrod_flags = *ramrod_flags;
mac_filters->unmatched_unicast | mask :
mac_filters->unmatched_unicast & ~mask;
- ECORE_MSG("drop_ucast 0x%xdrop_mcast 0x%x accp_ucast 0x%x"
+ ECORE_MSG(sc, "drop_ucast 0x%xdrop_mcast 0x%x accp_ucast 0x%x"
"accp_mcast 0x%xaccp_bcast 0x%x",
mac_filters->ucast_drop_all, mac_filters->mcast_drop_all,
mac_filters->ucast_accept_all, mac_filters->mcast_accept_all,
*/
ecore_rx_mode_set_rdata_hdr_e2(p->cid, &data->header, rule_idx);
- ECORE_MSG
- ("About to configure %d rules, rx_accept_flags 0x%lx, tx_accept_flags 0x%lx",
+ ECORE_MSG
+ (sc, "About to configure %d rules, rx_accept_flags 0x%lx, tx_accept_flags 0x%lx",
data->header.rule_cnt, p->rx_accept_flags, p->tx_accept_flags);
/* No need for an explicit memory barrier here as long we would
return rc;
}
} else {
- ECORE_MSG("ERROR: config_rx_mode is NULL");
+ ECORE_MSG(sc, "ERROR: config_rx_mode is NULL");
return -1;
}
if (!new_cmd)
return ECORE_NOMEM;
- ECORE_MSG("About to enqueue a new %d command. macs_list_len=%d",
+ ECORE_MSG(sc, "About to enqueue a new %d command. macs_list_len=%d",
cmd, macs_list_len);
ECORE_LIST_INIT(&new_cmd->data.macs_head);
default:
ECORE_FREE(sc, new_cmd, total_sz);
- PMD_DRV_LOG(ERR, "Unknown command: %d", cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", cmd);
return ECORE_INVAL;
}
break;
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", cmd);
return;
}
- ECORE_MSG("%s bin %d",
+ ECORE_MSG(sc, "%s bin %d",
((rx_tx_add_flag & ETH_MULTICAST_RULES_CMD_IS_ADD) ?
"Setting" : "Clearing"), bin);
cnt++;
- ECORE_MSG("About to configure a bin %d", cur_bin);
+ ECORE_MSG(sc, "About to configure a bin %d", cur_bin);
/* Break if we reached the maximum number
* of rules.
cnt++;
- ECORE_MSG
- ("About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC",
+ ECORE_MSG
+ (sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC",
pmac_pos->mac[0], pmac_pos->mac[1], pmac_pos->mac[2],
pmac_pos->mac[3], pmac_pos->mac[4], pmac_pos->mac[5]);
cmd_pos->data.macs_num--;
- ECORE_MSG("Deleting MAC. %d left,cnt is %d",
+ ECORE_MSG(sc, "Deleting MAC. %d left,cnt is %d",
cmd_pos->data.macs_num, cnt);
/* Break if we reached the maximum
break;
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", cmd_pos->type);
+ PMD_DRV_LOG(ERR, sc,
+ "Unknown command: %d", cmd_pos->type);
return ECORE_INVAL;
}
cnt++;
- ECORE_MSG
- ("About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC",
+ ECORE_MSG
+ (sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC",
mlist_pos->mac[0], mlist_pos->mac[1], mlist_pos->mac[2],
mlist_pos->mac[3], mlist_pos->mac[4], mlist_pos->mac[5]);
}
cnt++;
- ECORE_MSG("Deleting MAC. %d left", p->mcast_list_len - i - 1);
+ ECORE_MSG(sc,
+ "Deleting MAC. %d left", p->mcast_list_len - i - 1);
}
*line_idx = cnt;
struct ecore_mcast_obj *o = p->mcast_obj;
int cnt = start_cnt;
- ECORE_MSG("p->mcast_list_len=%d", p->mcast_list_len);
+ ECORE_MSG(sc, "p->mcast_list_len=%d", p->mcast_list_len);
switch (cmd) {
case ECORE_MCAST_CMD_ADD:
break;
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", cmd);
return ECORE_INVAL;
}
break;
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", cmd);
return ECORE_INVAL;
}
bit = ecore_mcast_bin_from_mac(mlist_pos->mac);
ECORE_57711_SET_MC_FILTER(mc_filter, bit);
- ECORE_MSG
- ("About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC, bin %d",
+ ECORE_MSG
+ (sc, "About to configure %02x:%02x:%02x:%02x:%02x:%02x mcast MAC, bin %d",
mlist_pos->mac[0], mlist_pos->mac[1], mlist_pos->mac[2],
mlist_pos->mac[3], mlist_pos->mac[4], mlist_pos->mac[5],
bit);
for (bit = ecore_mcast_get_next_bin(o, 0);
bit >= 0; bit = ecore_mcast_get_next_bin(o, bit + 1)) {
ECORE_57711_SET_MC_FILTER(mc_filter, bit);
- ECORE_MSG("About to set bin %d", bit);
+ ECORE_MSG(sc, "About to set bin %d", bit);
}
}
break;
case ECORE_MCAST_CMD_DEL:
- ECORE_MSG("Invalidating multicast MACs configuration");
+ ECORE_MSG(sc, "Invalidating multicast MACs configuration");
/* clear the registry */
ECORE_MEMSET(o->registry.aprox_match.vec, 0,
break;
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", cmd);
return ECORE_INVAL;
}
if ((!p->mcast_list_len) && (!o->check_sched(o)))
return ECORE_SUCCESS;
- ECORE_MSG
- ("o->total_pending_num=%d p->mcast_list_len=%d o->max_cmd_len=%d",
+ ECORE_MSG
+ (sc, "o->total_pending_num=%d p->mcast_list_len=%d o->max_cmd_len=%d",
o->total_pending_num, p->mcast_list_len, o->max_cmd_len);
/* Enqueue the current command to the pending list if we can't complete
ECORE_MEMSET(data, 0, sizeof(*data));
- ECORE_MSG("Configuring RSS");
+ ECORE_MSG(sc, "Configuring RSS");
/* Set an echo field */
data->echo = ECORE_CPU_TO_LE32((r->cid & ECORE_SWCID_MASK) |
data->rss_mode = rss_mode;
- ECORE_MSG("rss_mode=%d", rss_mode);
+ ECORE_MSG(sc, "rss_mode=%d", rss_mode);
/* RSS capabilities */
if (ECORE_TEST_BIT(ECORE_RSS_IPV4, &p->rss_flags))
/* RSS engine ID */
data->rss_engine_id = o->engine_id;
- ECORE_MSG("rss_engine_id=%d", data->rss_engine_id);
+ ECORE_MSG(sc, "rss_engine_id=%d", data->rss_engine_id);
/* Indirection table */
ECORE_MEMCPY(data->indirection_table, p->ind_table,
/* Check that the requested transition is legal */
rc = o->check_transition(sc, o, params);
if (rc) {
- PMD_DRV_LOG(ERR, "check transition returned an error. rc %d",
+ PMD_DRV_LOG(ERR, sc, "check transition returned an error. rc %d",
rc);
return ECORE_INVAL;
}
/* Set "pending" bit */
- ECORE_MSG("pending bit was=%lx", o->pending);
+ ECORE_MSG(sc, "pending bit was=%lx", o->pending);
pending_bit = o->set_pending(o, params);
- ECORE_MSG("pending bit now=%lx", o->pending);
+ ECORE_MSG(sc, "pending bit now=%lx", o->pending);
/* Don't send a command if only driver cleanup was requested */
if (ECORE_TEST_BIT(RAMROD_DRV_CLR_ONLY, ¶ms->ramrod_flags))
unsigned long cur_pending = o->pending;
if (!ECORE_TEST_AND_CLEAR_BIT(cmd, &cur_pending)) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"Bad MC reply %d for queue %d in state %d pending 0x%lx, next_state %d",
cmd, o->cids[ECORE_PRIMARY_CID_INDEX], o->state,
cur_pending, o->next_state);
/* >= because tx only must always be smaller than cos since the
* primary connection supports COS 0
*/
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"illegal value for next tx_only: %d. max cos was %d",
o->next_tx_only, o->max_cos);
- ECORE_MSG("Completing command %d for queue %d, setting state to %d",
+ ECORE_MSG(sc, "Completing command %d for queue %d, setting state to %d",
cmd, o->cids[ECORE_PRIMARY_CID_INDEX], o->next_state);
if (o->next_tx_only) /* print num tx-only if any exist */
- ECORE_MSG("primary cid %d: num tx-only cons %d",
+ ECORE_MSG(sc, "primary cid %d: num tx-only cons %d",
o->cids[ECORE_PRIMARY_CID_INDEX], o->next_tx_only);
o->state = o->next_state;
ECORE_TEST_BIT(ECORE_Q_FLG_FCOE, flags) ?
LLFC_TRAFFIC_TYPE_FCOE : LLFC_TRAFFIC_TYPE_NW;
- ECORE_MSG("flags: active %d, cos %d, stats en %d",
+ ECORE_MSG(sc, "flags: active %d, cos %d, stats en %d",
gen_data->activate_flg, gen_data->cos,
gen_data->statistics_en_flg);
}
ecore_q_fill_init_tx_data(&cmd_params->params.tx_only.txq_params,
&data->tx, &cmd_params->params.tx_only.flags);
- ECORE_MSG("cid %d, tx bd page lo %x hi %x",
+ ECORE_MSG(sc, "cid %d, tx bd page lo %x hi %x",
cmd_params->q_obj->cids[0],
data->tx.tx_bd_page_base.lo, data->tx.tx_bd_page_base.hi);
}
/* Set CDU context validation values */
for (cos = 0; cos < o->max_cos; cos++) {
- ECORE_MSG("setting context validation. cid %d, cos %d",
+ ECORE_MSG(sc, "setting context validation. cid %d, cos %d",
o->cids[cos], cos);
- ECORE_MSG("context pointer %p", init->cxts[cos]);
+ ECORE_MSG(sc, "context pointer %p", init->cxts[cos]);
ECORE_SET_CTX_VALIDATION(sc, init->cxts[cos], o->cids[cos]);
}
if (ECORE_TEST_BIT(ECORE_Q_TYPE_FWD, &o->type))
ramrod = RAMROD_CMD_ID_ETH_FORWARD_SETUP;
- ECORE_MSG("sending forward tx-only ramrod");
+ ECORE_MSG(sc, "sending forward tx-only ramrod");
if (cid_index >= o->max_cos) {
- PMD_DRV_LOG(ERR, "queue[%d]: cid_index (%d) is out of range",
+ PMD_DRV_LOG(ERR, sc, "queue[%d]: cid_index (%d) is out of range",
o->cl_id, cid_index);
return ECORE_INVAL;
}
- ECORE_MSG("parameters received: cos: %d sp-id: %d",
+ ECORE_MSG(sc, "parameters received: cos: %d sp-id: %d",
tx_only_params->gen_params.cos,
tx_only_params->gen_params.spcl_id);
/* Fill the ramrod data */
ecore_q_fill_setup_tx_only(sc, params, rdata);
- ECORE_MSG
- ("sending tx-only ramrod: cid %d, client-id %d, sp-client id %d, cos %d",
+ ECORE_MSG
+ (sc, "sending tx-only ramrod: cid %d, client-id %d, sp-client id %d, cos %d",
o->cids[cid_index], rdata->general.client_id,
rdata->general.sp_client_id, rdata->general.cos);
uint8_t cid_index = update_params->cid_index;
if (cid_index >= o->max_cos) {
- PMD_DRV_LOG(ERR, "queue[%d]: cid_index (%d) is out of range",
+ PMD_DRV_LOG(ERR, sc, "queue[%d]: cid_index (%d) is out of range",
o->cl_id, cid_index);
return ECORE_INVAL;
}
uint8_t cid_idx = params->params.cfc_del.cid_index;
if (cid_idx >= o->max_cos) {
- PMD_DRV_LOG(ERR, "queue[%d]: cid_index (%d) is out of range",
+ PMD_DRV_LOG(ERR, sc, "queue[%d]: cid_index (%d) is out of range",
o->cl_id, cid_idx);
return ECORE_INVAL;
}
uint8_t cid_index = params->params.terminate.cid_index;
if (cid_index >= o->max_cos) {
- PMD_DRV_LOG(ERR, "queue[%d]: cid_index (%d) is out of range",
+ PMD_DRV_LOG(ERR, sc, "queue[%d]: cid_index (%d) is out of range",
o->cl_id, cid_index);
return ECORE_INVAL;
}
case ECORE_Q_CMD_EMPTY:
return ecore_q_send_empty(sc, params);
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", params->cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", params->cmd);
return ECORE_INVAL;
}
}
case ECORE_Q_CMD_EMPTY:
return ecore_queue_send_cmd_cmn(sc, params);
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", params->cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", params->cmd);
return ECORE_INVAL;
}
}
case ECORE_Q_CMD_EMPTY:
return ecore_queue_send_cmd_cmn(sc, params);
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", params->cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", params->cmd);
return ECORE_INVAL;
}
}
* the previous one.
*/
if (o->pending) {
- PMD_DRV_LOG(ERR, "Blocking transition since pending was %lx",
+ PMD_DRV_LOG(ERR, sc, "Blocking transition since pending was %lx",
o->pending);
return ECORE_BUSY;
}
break;
default:
- PMD_DRV_LOG(ERR, "Illegal state: %d", state);
+ PMD_DRV_LOG(ERR, sc, "Illegal state: %d", state);
}
/* Transition is assured */
if (next_state != ECORE_Q_STATE_MAX) {
- ECORE_MSG("Good state transition: %d(%d)->%d",
+ ECORE_MSG(sc, "Good state transition: %d(%d)->%d",
state, cmd, next_state);
o->next_state = next_state;
o->next_tx_only = next_tx_only;
return ECORE_SUCCESS;
}
- ECORE_MSG("Bad state transition request: %d %d", state, cmd);
+ ECORE_MSG(sc, "Bad state transition request: %d %d", state, cmd);
return ECORE_INVAL;
}
break;
default:
- PMD_DRV_LOG(ERR, "Illegal state: %d", state);
+ PMD_DRV_LOG(ERR, sc, "Illegal state: %d", state);
}
/* Transition is assured */
if (next_state != ECORE_Q_STATE_MAX) {
- ECORE_MSG("Good state transition: %d(%d)->%d",
+ ECORE_MSG(sc, "Good state transition: %d(%d)->%d",
state, cmd, next_state);
o->next_state = next_state;
return ECORE_SUCCESS;
}
- ECORE_MSG("Bad state transition request: %d %d", state, cmd);
+ ECORE_MSG(sc, "Bad state transition request: %d %d", state, cmd);
return ECORE_INVAL;
}
unsigned long cur_pending = o->pending;
if (!ECORE_TEST_AND_CLEAR_BIT(cmd, &cur_pending)) {
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"Bad MC reply %d for func %d in state %d pending 0x%lx, next_state %d",
cmd, ECORE_FUNC_ID(sc), o->state, cur_pending,
o->next_state);
return ECORE_INVAL;
}
- ECORE_MSG("Completing command %d for func %d, setting state to %d",
+ ECORE_MSG(sc, "Completing command %d for func %d, setting state to %d",
cmd, ECORE_FUNC_ID(sc), o->next_state);
o->state = o->next_state;
break;
default:
- PMD_DRV_LOG(ERR, "Unknown state: %d", state);
+ PMD_DRV_LOG(ERR, sc, "Unknown state: %d", state);
}
/* Transition is assured */
if (next_state != ECORE_F_STATE_MAX) {
- ECORE_MSG("Good function state transition: %d(%d)->%d",
+ ECORE_MSG(sc, "Good function state transition: %d(%d)->%d",
state, cmd, next_state);
o->next_state = next_state;
return ECORE_SUCCESS;
}
- ECORE_MSG("Bad function state transition request: %d %d", state, cmd);
+ ECORE_MSG(sc,
+ "Bad function state transition request: %d %d", state, cmd);
return ECORE_INVAL;
}
const struct ecore_func_sp_drv_ops *drv = o->drv;
int rc = 0;
- ECORE_MSG("function %d load_code %x",
+ ECORE_MSG(sc, "function %d load_code %x",
ECORE_ABS_FUNC_ID(sc), load_code);
/* Prepare FW */
rc = drv->init_fw(sc);
if (rc) {
- PMD_DRV_LOG(ERR, "Error loading firmware");
+ PMD_DRV_LOG(ERR, sc, "Error loading firmware");
goto init_err;
}
break;
default:
- PMD_DRV_LOG(ERR, "Unknown load_code (0x%x) from MCP",
+ PMD_DRV_LOG(ERR, sc, "Unknown load_code (0x%x) from MCP",
load_code);
rc = ECORE_INVAL;
}
struct ecore_func_sp_obj *o = params->f_obj;
const struct ecore_func_sp_drv_ops *drv = o->drv;
- ECORE_MSG("function %d reset_phase %x", ECORE_ABS_FUNC_ID(sc),
+ ECORE_MSG(sc, "function %d reset_phase %x", ECORE_ABS_FUNC_ID(sc),
reset_phase);
switch (reset_phase) {
ecore_func_reset_func(sc, drv);
break;
default:
- PMD_DRV_LOG(ERR, "Unknown reset_phase (0x%x) from MCP",
+ PMD_DRV_LOG(ERR, sc, "Unknown reset_phase (0x%x) from MCP",
reset_phase);
break;
}
* read and we will have to put a full memory barrier there
* (inside ecore_sp_post()).
*/
- ECORE_MSG("afex: sending func_update vif_id 0x%x dvlan 0x%x prio 0x%x",
+ ECORE_MSG(sc, "afex: sending func_update vif_id 0x%x dvlan 0x%x prio 0x%x",
rdata->vif_id,
rdata->afex_default_vlan, rdata->allowed_priorities);
* (inside ecore_sp_post()).
*/
- ECORE_MSG
- ("afex: ramrod lists, cmd 0x%x index 0x%x func_bit_map 0x%x func_to_clr 0x%x",
+ ECORE_MSG
+ (sc, "afex: ramrod lists, cmd 0x%x index 0x%x func_bit_map 0x%x func_to_clr 0x%x",
rdata->afex_vif_list_command, rdata->vif_list_index,
rdata->func_bit_map, rdata->func_to_clear);
case ECORE_F_CMD_SWITCH_UPDATE:
return ecore_func_send_switch_update(sc, params);
default:
- PMD_DRV_LOG(ERR, "Unknown command: %d", params->cmd);
+ PMD_DRV_LOG(ERR, sc, "Unknown command: %d", params->cmd);
return ECORE_INVAL;
}
}
}
if (rc == ECORE_BUSY) {
ECORE_MUTEX_UNLOCK(&o->one_pending_mutex);
- PMD_DRV_LOG(ERR,
+ PMD_DRV_LOG(ERR, sc,
"timeout waiting for previous ramrod completion");
return rc;
}
Code Review / deb_dpdk.git / blobdiff