/*-
* BSD LICENSE
*
- * Copyright(c) Broadcom Limited.
+ * Copyright(c) 2001-2017 Broadcom Limited.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#ifndef _HSI_STRUCT_DEF_EXTERNAL_H_
-#define _HSI_STRUCT_DEF_EXTERNAL_H_
-
-/*
- * per-context HW statistics -- chip view
- */
-
-struct ctx_hw_stats64 {
- uint64_t rx_ucast_pkts;
- uint64_t rx_mcast_pkts;
- uint64_t rx_bcast_pkts;
- uint64_t rx_drop_pkts;
- uint64_t rx_discard_pkts;
- uint64_t rx_ucast_bytes;
- uint64_t rx_mcast_bytes;
- uint64_t rx_bcast_bytes;
-
- uint64_t tx_ucast_pkts;
- uint64_t tx_mcast_pkts;
- uint64_t tx_bcast_pkts;
- uint64_t tx_drop_pkts;
- uint64_t tx_discard_pkts;
- uint64_t tx_ucast_bytes;
- uint64_t tx_mcast_bytes;
- uint64_t tx_bcast_bytes;
-
- uint64_t tpa_pkts;
- uint64_t tpa_bytes;
- uint64_t tpa_events;
- uint64_t tpa_aborts;
-} __attribute__((packed));
-
-/* HW Resource Manager Specification 1.5.1 */
+#ifndef _HSI_STRUCT_DEF_DPDK_
+#define _HSI_STRUCT_DEF_DPDK_
+/* HSI and HWRM Specification 1.7.7 */
#define HWRM_VERSION_MAJOR 1
-#define HWRM_VERSION_MINOR 5
-#define HWRM_VERSION_UPDATE 1
-
-#define HWRM_VERSION_STR "1.5.1"
+#define HWRM_VERSION_MINOR 7
+#define HWRM_VERSION_UPDATE 7
+#define HWRM_VERSION_STR "1.7.7"
/*
* Following is the signature for HWRM message field that indicates not
- * applicable (All F's). Need to cast it the size of the field if needed.
+ * applicable (All F's). Need to cast it the size of the field if needed.
*/
-#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
+#define HWRM_NA_SIGNATURE ((uint32_t)(-1))
#define HWRM_MAX_REQ_LEN (128) /* hwrm_func_buf_rgtr */
-#define HWRM_MAX_RESP_LEN (176) /* hwrm_func_qstats */
-#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
-#define HW_HASH_KEY_SIZE 40
+#define HWRM_MAX_RESP_LEN (248) /* hwrm_selftest_qlist */
+#define HW_HASH_INDEX_SIZE 0x80 /* 7 bit indirection table index. */
+#define HW_HASH_KEY_SIZE 40
#define HWRM_RESP_VALID_KEY 1 /* valid key for HWRM response */
+#define HWRM_ROCE_SP_HSI_VERSION_MAJOR 1
+#define HWRM_ROCE_SP_HSI_VERSION_MINOR 7
+#define HWRM_ROCE_SP_HSI_VERSION_UPDATE 4
/*
* Request types
*/
#define HWRM_VER_GET (UINT32_C(0x0))
+#define HWRM_FUNC_BUF_UNRGTR (UINT32_C(0xe))
+#define HWRM_FUNC_VF_CFG (UINT32_C(0xf))
+ /* Reserved for future use */
+#define RESERVED1 (UINT32_C(0x10))
#define HWRM_FUNC_RESET (UINT32_C(0x11))
+#define HWRM_FUNC_GETFID (UINT32_C(0x12))
+#define HWRM_FUNC_VF_ALLOC (UINT32_C(0x13))
+#define HWRM_FUNC_VF_FREE (UINT32_C(0x14))
#define HWRM_FUNC_QCAPS (UINT32_C(0x15))
#define HWRM_FUNC_QCFG (UINT32_C(0x16))
+#define HWRM_FUNC_CFG (UINT32_C(0x17))
+#define HWRM_FUNC_QSTATS (UINT32_C(0x18))
+#define HWRM_FUNC_CLR_STATS (UINT32_C(0x19))
#define HWRM_FUNC_DRV_UNRGTR (UINT32_C(0x1a))
+#define HWRM_FUNC_VF_RESC_FREE (UINT32_C(0x1b))
+#define HWRM_FUNC_VF_VNIC_IDS_QUERY (UINT32_C(0x1c))
#define HWRM_FUNC_DRV_RGTR (UINT32_C(0x1d))
+#define HWRM_FUNC_DRV_QVER (UINT32_C(0x1e))
+#define HWRM_FUNC_BUF_RGTR (UINT32_C(0x1f))
#define HWRM_PORT_PHY_CFG (UINT32_C(0x20))
+#define HWRM_PORT_MAC_CFG (UINT32_C(0x21))
+#define HWRM_PORT_QSTATS (UINT32_C(0x23))
+#define HWRM_PORT_LPBK_QSTATS (UINT32_C(0x24))
+#define HWRM_PORT_CLR_STATS (UINT32_C(0x25))
#define HWRM_PORT_PHY_QCFG (UINT32_C(0x27))
+#define HWRM_PORT_MAC_QCFG (UINT32_C(0x28))
+#define HWRM_PORT_PHY_QCAPS (UINT32_C(0x2a))
+#define HWRM_PORT_LED_CFG (UINT32_C(0x2d))
+#define HWRM_PORT_LED_QCFG (UINT32_C(0x2e))
+#define HWRM_PORT_LED_QCAPS (UINT32_C(0x2f))
#define HWRM_QUEUE_QPORTCFG (UINT32_C(0x30))
+#define HWRM_QUEUE_QCFG (UINT32_C(0x31))
+#define HWRM_QUEUE_CFG (UINT32_C(0x32))
+#define HWRM_FUNC_VLAN_CFG (UINT32_C(0x33))
+#define HWRM_FUNC_VLAN_QCFG (UINT32_C(0x34))
+#define HWRM_QUEUE_PFCENABLE_QCFG (UINT32_C(0x35))
+#define HWRM_QUEUE_PFCENABLE_CFG (UINT32_C(0x36))
+#define HWRM_QUEUE_PRI2COS_QCFG (UINT32_C(0x37))
+#define HWRM_QUEUE_PRI2COS_CFG (UINT32_C(0x38))
+#define HWRM_QUEUE_COS2BW_QCFG (UINT32_C(0x39))
+#define HWRM_QUEUE_COS2BW_CFG (UINT32_C(0x3a))
+#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
#define HWRM_VNIC_ALLOC (UINT32_C(0x40))
#define HWRM_VNIC_FREE (UINT32_C(0x41))
#define HWRM_VNIC_CFG (UINT32_C(0x42))
+#define HWRM_VNIC_QCFG (UINT32_C(0x43))
+#define HWRM_VNIC_TPA_CFG (UINT32_C(0x44))
#define HWRM_VNIC_RSS_CFG (UINT32_C(0x46))
+#define HWRM_VNIC_RSS_QCFG (UINT32_C(0x47))
+#define HWRM_VNIC_PLCMODES_CFG (UINT32_C(0x48))
+#define HWRM_VNIC_PLCMODES_QCFG (UINT32_C(0x49))
+#define HWRM_VNIC_QCAPS (UINT32_C(0x4a))
#define HWRM_RING_ALLOC (UINT32_C(0x50))
#define HWRM_RING_FREE (UINT32_C(0x51))
+#define HWRM_RING_CMPL_RING_QAGGINT_PARAMS (UINT32_C(0x52))
+#define HWRM_RING_CMPL_RING_CFG_AGGINT_PARAMS (UINT32_C(0x53))
+#define HWRM_RING_RESET (UINT32_C(0x5e))
#define HWRM_RING_GRP_ALLOC (UINT32_C(0x60))
#define HWRM_RING_GRP_FREE (UINT32_C(0x61))
#define HWRM_VNIC_RSS_COS_LB_CTX_ALLOC (UINT32_C(0x70))
#define HWRM_CFA_L2_FILTER_FREE (UINT32_C(0x91))
#define HWRM_CFA_L2_FILTER_CFG (UINT32_C(0x92))
#define HWRM_CFA_L2_SET_RX_MASK (UINT32_C(0x93))
+ /* Reserved for future use */
+#define HWRM_CFA_VLAN_ANTISPOOF_CFG (UINT32_C(0x94))
+#define HWRM_CFA_TUNNEL_FILTER_ALLOC (UINT32_C(0x95))
+#define HWRM_CFA_TUNNEL_FILTER_FREE (UINT32_C(0x96))
+#define HWRM_CFA_NTUPLE_FILTER_ALLOC (UINT32_C(0x99))
+#define HWRM_CFA_NTUPLE_FILTER_FREE (UINT32_C(0x9a))
+#define HWRM_CFA_NTUPLE_FILTER_CFG (UINT32_C(0x9b))
+#define HWRM_TUNNEL_DST_PORT_QUERY (UINT32_C(0xa0))
+#define HWRM_TUNNEL_DST_PORT_ALLOC (UINT32_C(0xa1))
+#define HWRM_TUNNEL_DST_PORT_FREE (UINT32_C(0xa2))
#define HWRM_STAT_CTX_ALLOC (UINT32_C(0xb0))
#define HWRM_STAT_CTX_FREE (UINT32_C(0xb1))
+#define HWRM_STAT_CTX_QUERY (UINT32_C(0xb2))
#define HWRM_STAT_CTX_CLR_STATS (UINT32_C(0xb3))
+#define HWRM_FW_RESET (UINT32_C(0xc0))
+#define HWRM_FW_QSTATUS (UINT32_C(0xc1))
#define HWRM_EXEC_FWD_RESP (UINT32_C(0xd0))
+#define HWRM_REJECT_FWD_RESP (UINT32_C(0xd1))
+#define HWRM_FWD_RESP (UINT32_C(0xd2))
+#define HWRM_FWD_ASYNC_EVENT_CMPL (UINT32_C(0xd3))
+#define HWRM_TEMP_MONITOR_QUERY (UINT32_C(0xe0))
+#define HWRM_WOL_FILTER_ALLOC (UINT32_C(0xf0))
+#define HWRM_WOL_FILTER_FREE (UINT32_C(0xf1))
+#define HWRM_WOL_FILTER_QCFG (UINT32_C(0xf2))
+#define HWRM_WOL_REASON_QCFG (UINT32_C(0xf3))
+#define HWRM_DBG_DUMP (UINT32_C(0xff14))
+#define HWRM_NVM_VALIDATE_OPTION (UINT32_C(0xffef))
+#define HWRM_NVM_FLUSH (UINT32_C(0xfff0))
+#define HWRM_NVM_GET_VARIABLE (UINT32_C(0xfff1))
+#define HWRM_NVM_SET_VARIABLE (UINT32_C(0xfff2))
+#define HWRM_NVM_INSTALL_UPDATE (UINT32_C(0xfff3))
+#define HWRM_NVM_MODIFY (UINT32_C(0xfff4))
+#define HWRM_NVM_VERIFY_UPDATE (UINT32_C(0xfff5))
+#define HWRM_NVM_GET_DEV_INFO (UINT32_C(0xfff6))
+#define HWRM_NVM_ERASE_DIR_ENTRY (UINT32_C(0xfff7))
+#define HWRM_NVM_MOD_DIR_ENTRY (UINT32_C(0xfff8))
+#define HWRM_NVM_FIND_DIR_ENTRY (UINT32_C(0xfff9))
+#define HWRM_NVM_GET_DIR_ENTRIES (UINT32_C(0xfffa))
+#define HWRM_NVM_GET_DIR_INFO (UINT32_C(0xfffb))
+#define HWRM_NVM_RAW_DUMP (UINT32_C(0xfffc))
+#define HWRM_NVM_READ (UINT32_C(0xfffd))
+#define HWRM_NVM_WRITE (UINT32_C(0xfffe))
+#define HWRM_NVM_RAW_WRITE_BLK (UINT32_C(0xffff))
-/* Return Codes */
-#define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
-#define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
-
-/* Short TX BD (16 bytes) */
+/*
+ * Note: The Host Software Interface (HSI) and Hardware Resource Manager (HWRM)
+ * specification describes the data structures used in Ethernet packet or RDMA
+ * message data transfers as well as an abstract interface for managing Ethernet
+ * NIC hardware resources.
+ */
+/* Ethernet Data path Host Structures */
+/*
+ * Description: The following three sections document the host structures used
+ * between device and software drivers for communicating Ethernet packets.
+ */
+/* BD Ring Structures */
+/*
+ * Description: This structure is used to inform the NIC of a location for and
+ * an aggregation buffer that will be used for packet data that is received. An
+ * aggregation buffer creates a different kind of completion operation for a
+ * packet where a variable number of BDs may be used to place the packet in the
+ * host. RX Rings that have aggregation buffers are known as aggregation rings
+ * and must contain only aggregation buffers.
+ */
+/* Short TX BD (16 bytes) */
struct tx_bd_short {
uint16_t flags_type;
/*
/*
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet. A value of 1 indicates that this
- * BD is the only BD (and that the it is a short BD). A value of
+ * BD is the only BD (and that the it is a short BD). A value of
* 3 indicates either 3 short BDs or 1 long BD and one short BD
* in the packet. A value of 0 indicates that there are 32 BD
- * locations in the packet (the maximum). This field is valid
+ * locations in the packet (the maximum). This field is valid
* only on the first BD of a packet.
*/
#define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
#define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
/* indicates packet length >= 2KB */
#define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
- #define TX_BD_SHORT_FLAGS_LHINT_LAST TX_BD_SHORT_FLAGS_LHINT_GTE2K
+ #define TX_BD_SHORT_FLAGS_LHINT_LAST \
+ TX_BD_SHORT_FLAGS_LHINT_GTE2K
/*
* If set to 1, the device immediately updates the Send Consumer
* Index after the buffer associated with this descriptor has
*/
} __attribute__((packed));
-/* Long TX BD (32 bytes split to 2 16-byte struct) */
+/* Long TX BD (32 bytes split to 2 16-byte struct) */
struct tx_bd_long {
uint16_t flags_type;
/*
/*
* This value indicates how many 16B BD locations are consumed
* in the ring by this packet. A value of 1 indicates that this
- * BD is the only BD (and that the it is a short BD). A value of
+ * BD is the only BD (and that the it is a short BD). A value of
* 3 indicates either 3 short BDs or 1 long BD and one short BD
* in the packet. A value of 0 indicates that there are 32 BD
- * locations in the packet (the maximum). This field is valid
+ * locations in the packet (the maximum). This field is valid
* only on the first BD of a packet.
*/
#define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
#define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13)
/* indicates packet length >= 2KB */
#define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13)
- #define TX_BD_LONG_FLAGS_LHINT_LAST TX_BD_LONG_FLAGS_LHINT_GTE2K
+ #define TX_BD_LONG_FLAGS_LHINT_LAST \
+ TX_BD_LONG_FLAGS_LHINT_GTE2K
/*
* If set to 1, the device immediately updates the Send Consumer
* Index after the buffer associated with this descriptor has
* bit is set, outer UDP checksum will be calculated for the
* following cases: 1. Packets with tcp_udp_chksum flag set to
* offload checksum for inner packet AND the inner packet is
- * TCP/UDP. If the inner packet is ICMP for example (non-
+ * TCP/UDP. If the inner packet is ICMP for example (non-
* TCP/UDP), even if the tcp_udp_chksum is set, the outer UDP
* checksum will not be calculated. 2. Packets with lso flag set
* which implies inner TCP checksum calculation as part of LSO
* to one when LSO is '1', then the IPID of the tunnel IP header
* will be incremented for each subsequent segment of an LSO
* operation. The flag is ignored if the LSO packet is a normal
- * (non-tunneled) TCP packet.
+ * (non-tunneled) TCP packet.
*/
#define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80)
/*
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16)
/* Value programmed in CFA VLANTPID register. */
#define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16)
- #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
+ #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \
TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG
/* When key=1, This is the VLAN tag TPID select value. */
#define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000)
/* No editing */
#define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28)
/*
- * - meta[17:16] - TPID select value (0 =
+ * - meta[17:16] - TPID select value (0 =
* 0x8100). - meta[15:12] - PRI/DE value. -
* meta[11:0] - VID value.
*/
#define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28)
- #define TX_BD_LONG_CFA_META_KEY_LAST TX_BD_LONG_CFA_META_KEY_VLAN_TAG
+ #define TX_BD_LONG_CFA_META_KEY_LAST \
+ TX_BD_LONG_CFA_META_KEY_VLAN_TAG
} __attribute__((packed));
-/* RX Producer Packet BD (16 bytes) */
+/* RX Producer Packet BD (16 bytes) */
struct rx_prod_pkt_bd {
uint16_t flags_type;
/* This value identifies the type of buffer descriptor. */
#define RX_PROD_PKT_BD_TYPE_SFT 0
/*
* Indicates that this BD is 16B long and is an
- * RX Producer (ie. empty) buffer descriptor.
+ * RX Producer (ie. empty) buffer descriptor.
*/
#define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4)
/*
/* Completion Ring Structures */
/* Note: This structure is used by the HWRM to communicate HWRM Error. */
-/* Base Completion Record (16 bytes) */
+/* Base Completion Record (16 bytes) */
struct cmpl_base {
uint16_t type;
/* unused is 10 b */
/* info4 is 32 b */
} __attribute__((packed));
-/* TX Completion Record (16 bytes) */
+/* TX Completion Record (16 bytes) */
struct tx_cmpl {
uint16_t flags_type;
/*
#define TX_CMPL_ERRORS_BUFFER_ERROR_NO_ERROR (UINT32_C(0x0) << 1)
/* Bad Format: BDs were not formatted correctly. */
#define TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT (UINT32_C(0x2) << 1)
- #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ #define TX_CMPL_ERRORS_BUFFER_ERROR_LAST \
TX_CMPL_ERRORS_BUFFER_ERROR_BAD_FMT
/*
* When this bit is '1', it indicates that the length of the
/* unused3 is 32 b */
} __attribute__((packed));
-/* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */
+/* RX Packet Completion Record (32 bytes split to 2 16-byte struct) */
struct rx_pkt_cmpl {
uint16_t flags_type;
/*
* RX L2 completion: Completion of and L2 RX
* packet. Length = 32B
*/
- #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11)
+ #define RX_PKT_CMPL_TYPE_RX_L2 UINT32_C(0x11)
+ #define RX_PKT_CMPL_TYPE_RX_L2_TPA_START UINT32_C(0x13)
+ #define RX_PKT_CMPL_TYPE_RX_L2_TPA_END UINT32_C(0x15)
/*
* When this bit is '1', it indicates a packet that has an error
* of some type. Type of error is indicated in error_flags.
* field.
*/
#define RX_PKT_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
- #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
+ #define RX_PKT_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_PKT_CMPL_FLAGS_PLACEMENT_HDS
/* This bit is '1' if the RSS field in this completion is valid. */
#define RX_PKT_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
/* unused is 1 b */
+ #define RX_PKT_CMPL_FLAGS_UNUSED UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
* that a timestamp was taken for the packet.
*/
#define RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP (UINT32_C(0x9) << 12)
- #define RX_PKT_CMPL_FLAGS_ITYPE_LAST RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
+ #define RX_PKT_CMPL_FLAGS_ITYPE_LAST \
+ RX_PKT_CMPL_FLAGS_ITYPE_PTP_W_TIMESTAMP
#define RX_PKT_CMPL_FLAGS_MASK UINT32_C(0xffc0)
#define RX_PKT_CMPL_FLAGS_SFT 6
uint16_t len;
* the vlan TPID value.
*/
#define RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
- #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
+ #define RX_PKT_CMPL_FLAGS2_META_FORMAT_LAST \
RX_PKT_CMPL_FLAGS2_META_FORMAT_VLAN
/*
* This field indicates the IP type for the inner-most IP
* means that the packet could not be placed
* into 7 physical buffers or less.
*/
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT (UINT32_C(0x1) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_DID_NOT_FIT \
+ (UINT32_C(0x1) << 1)
/*
* Not On Chip: All BDs needed for the packet
* were not on-chip when the packet arrived.
*/
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP (UINT32_C(0x2) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
/* Bad Format: BDs were not formatted correctly. */
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT (UINT32_C(0x3) << 1)
- #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT \
+ (UINT32_C(0x3) << 1)
+ #define RX_PKT_CMPL_ERRORS_BUFFER_ERROR_LAST \
RX_PKT_CMPL_ERRORS_BUFFER_ERROR_BAD_FORMAT
/* This indicates that there was an error in the IP header checksum. */
#define RX_PKT_CMPL_ERRORS_IP_CS_ERROR UINT32_C(0x10)
* match expectation from L2 Ethertype for IPv4
* and IPv6 in the tunnel header.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION (UINT32_C(0x1) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 9)
/*
* Indicates that header length is out of range
* in the tunnel header. Valid for IPv4.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN (UINT32_C(0x2) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 9)
/*
* Indicates that the physical packet is shorter
* than that claimed by the PPPoE header length
* for a tunnel PPPoE packet.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR (UINT32_C(0x3) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_TUNNEL_TOTAL_ERROR \
+ (UINT32_C(0x3) << 9)
/*
* Indicates that physical packet is shorter
* than that claimed by the tunnel l3 header
* length. Valid for IPv4, or IPv6 tunnel packet
* packets.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR (UINT32_C(0x4) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 9)
/*
* Indicates that the physical packet is shorter
* than that claimed by the tunnel UDP header
* length for a tunnel UDP packet that is not
* fragmented.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR (UINT32_C(0x5) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 9)
/*
* indicates that the IPv4 TTL or IPv6 hop limit
- * check have failed (e.g. TTL = 0) in the
+ * check have failed (e.g. TTL = 0) in the
* tunnel header. Valid for IPv4, and IPv6.
*/
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL (UINT32_C(0x6) << 9)
- #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL \
+ (UINT32_C(0x6) << 9)
+ #define RX_PKT_CMPL_ERRORS_T_PKT_ERROR_LAST \
RX_PKT_CMPL_ERRORS_T_PKT_ERROR_T_L3_BAD_TTL
/*
* This indicates that there was an error in the inner portion
* and IPv6 or that option other than VFT was
* parsed on FCoE packet.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION (UINT32_C(0x1) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_VERSION \
+ (UINT32_C(0x1) << 12)
/*
* indicates that header length is out of range.
* Valid for IPv4 and RoCE
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN (UINT32_C(0x2) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_HDR_LEN \
+ (UINT32_C(0x2) << 12)
/*
* indicates that the IPv4 TTL or IPv6 hop limit
- * check have failed (e.g. TTL = 0). Valid for
+ * check have failed (e.g. TTL = 0). Valid for
* IPv4, and IPv6
*/
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L3_BAD_TTL (UINT32_C(0x3) << 12)
* than that claimed by the l3 header length.
* Valid for IPv4, IPv6 packet or RoCE packets.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR (UINT32_C(0x4) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_IP_TOTAL_ERROR \
+ (UINT32_C(0x4) << 12)
/*
* Indicates that the physical packet is shorter
* than that claimed by the UDP header length
* for a UDP packet that is not fragmented.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR (UINT32_C(0x5) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_UDP_TOTAL_ERROR \
+ (UINT32_C(0x5) << 12)
/*
* Indicates that TCP header length > IP
* payload. Valid for TCP packets only.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN (UINT32_C(0x6) << 12)
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN \
+ (UINT32_C(0x6) << 12)
/* Indicates that TCP header length < 5. Valid for TCP. */
#define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_HDR_LEN_TOO_SMALL \
(UINT32_C(0x7) << 12)
* TCP header size that does not match data
* offset in TCP header. Valid for TCP.
*/
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN \
(UINT32_C(0x8) << 12)
- #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
+ #define RX_PKT_CMPL_ERRORS_PKT_ERROR_LAST \
RX_PKT_CMPL_ERRORS_PKT_ERROR_L4_BAD_OPT_LEN
#define RX_PKT_CMPL_ERRORS_MASK UINT32_C(0xfffe)
#define RX_PKT_CMPL_ERRORS_SFT 1
#define RX_PKT_CMPL_REORDER_SFT 0
} __attribute__((packed));
-/* HWRM Forwarded Request (16 bytes) */
+/* RX L2 TPA Start Completion Record (32 bytes split to 2 16-byte struct) */
+struct rx_tpa_start_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion. By
+ * convention, the LSB identifies the length of the record in
+ * 16B units. Even values indicate 16B records. Odd values
+ * indicate 32B records.
+ */
+ #define RX_TPA_START_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_START_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA Start Completion: Completion at the
+ * beginning of a TPA operation. Length = 32B
+ */
+ #define RX_TPA_START_CMPL_TYPE_RX_TPA_START UINT32_C(0x13)
+ /* This bit will always be '0' for TPA start completions. */
+ #define RX_TPA_START_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo: TPA Packet was placed using jumbo
+ * algorithm. This means that the first buffer
+ * will be filled with data before moving to
+ * aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next
+ * aggregation buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation: Packet was placed
+ * using Header/Data separation algorithm. The
+ * separation location is indicated by the itype
+ * field.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
+ /*
+ * GRO/Jumbo: Packet will be placed using
+ * GRO/Jumbo where the first packet is filled
+ * with data. Subsequent packets will be placed
+ * such that any one packet does not span two
+ * aggregation buffers unless it starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_JUMBO \
+ (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation: Packet will be
+ * placed using GRO/HDS where the header is in
+ * the first packet. Payload of each packet will
+ * be placed such that any one packet does not
+ * span two aggregation buffers unless it starts
+ * at the beginning of an aggregation buffer.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7)
+ #define RX_TPA_START_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_START_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* This bit is '1' if the RSS field in this completion is valid. */
+ #define RX_TPA_START_CMPL_FLAGS_RSS_VALID UINT32_C(0x400)
+ /* unused is 1 b */
+ #define RX_TPA_START_CMPL_FLAGS_UNUSED UINT32_C(0x800)
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was.
+ */
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_SFT 12
+ /* TCP Packet: Indicates that the packet was IP and TCP. */
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_TCP (UINT32_C(0x2) << 12)
+ #define RX_TPA_START_CMPL_FLAGS_ITYPE_LAST \
+ RX_TPA_START_CMPL_FLAGS_ITYPE_TCP
+ #define RX_TPA_START_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_START_CMPL_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This value indicates the amount of packet data written to the
+ * buffer the opaque field in this completion corresponds to.
+ */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the RX BD this
+ * completion corresponds to.
+ */
+ uint8_t v1;
+ /* unused1 is 7 b */
+ /*
+ * This value is written by the NIC such that it will be
+ * different for each pass through the completion queue. The
+ * even passes will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_START_CMPL_V1 UINT32_C(0x1)
+ /* unused1 is 7 b */
+ uint8_t rss_hash_type;
+ /*
+ * This is the RSS hash type for the packet. The value is packed
+ * {tuple_extrac_op[1:0],rss_profile_id[4:0],tuple_extrac_op[2]}
+ * . The value of tuple_extrac_op provides the information about
+ * what fields the hash was computed on. * 0: The RSS hash was
+ * computed over source IP address, destination IP address,
+ * source port, and destination port of inner IP and TCP or UDP
+ * headers. Note: For non-tunneled packets, the packet headers
+ * are considered inner packet headers for the RSS hash
+ * computation purpose. * 1: The RSS hash was computed over
+ * source IP address and destination IP address of inner IP
+ * header. Note: For non-tunneled packets, the packet headers
+ * are considered inner packet headers for the RSS hash
+ * computation purpose. * 2: The RSS hash was computed over
+ * source IP address, destination IP address, source port, and
+ * destination port of IP and TCP or UDP headers of outer tunnel
+ * headers. Note: For non-tunneled packets, this value is not
+ * applicable. * 3: The RSS hash was computed over source IP
+ * address and destination IP address of IP header of outer
+ * tunnel headers. Note: For non-tunneled packets, this value is
+ * not applicable. Note that 4-tuples values listed above are
+ * applicable for layer 4 protocols supported and enabled for
+ * RSS in the hardware, HWRM firmware, and drivers. For example,
+ * if RSS hash is supported and enabled for TCP traffic only,
+ * then the values of tuple_extract_op corresponding to 4-tuples
+ * are only valid for TCP traffic.
+ */
+ uint16_t agg_id;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ /* unused2 is 9 b */
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ #define RX_TPA_START_CMPL_AGG_ID_MASK UINT32_C(0xfe00)
+ #define RX_TPA_START_CMPL_AGG_ID_SFT 9
+ uint32_t rss_hash;
+ /*
+ * This value is the RSS hash value calculated for the packet
+ * based on the mode bits and key value in the VNIC.
+ */
+} __attribute__((packed));
+
+/* last 16 bytes of RX L2 TPA Start Completion Record */
+struct rx_tpa_start_cmpl_hi {
+ uint32_t flags2;
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * inner packet and that the sum passed for all segments
+ * included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_IP_CS_CALC UINT32_C(0x1)
+ /*
+ * This indicates that the TCP, UDP or ICMP checksum was
+ * calculated for the inner packet and that the sum passed for
+ * all segments included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_L4_CS_CALC UINT32_C(0x2)
+ /*
+ * This indicates that the ip checksum was calculated for the
+ * tunnel header and that the sum passed for all segments
+ * included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_T_IP_CS_CALC UINT32_C(0x4)
+ /*
+ * This indicates that the UDP checksum was calculated for the
+ * tunnel packet and that the sum passed for all segments
+ * included in the aggregation.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_T_L4_CS_CALC UINT32_C(0x8)
+ /* This value indicates what format the metadata field is. */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_MASK UINT32_C(0xf0)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_SFT 4
+ /* No metadata informtaion. Value is zero. */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_NONE (UINT32_C(0x0) << 4)
+ /*
+ * The metadata field contains the VLAN tag and
+ * TPID value. - metadata[11:0] contains the
+ * vlan VID value. - metadata[12] contains the
+ * vlan DE value. - metadata[15:13] contains the
+ * vlan PRI value. - metadata[31:16] contains
+ * the vlan TPID value.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN (UINT32_C(0x1) << 4)
+ #define RX_TPA_START_CMPL_FLAGS2_META_FORMAT_LAST \
+ RX_TPA_START_CMPL_FLAGS2_META_FORMAT_VLAN
+ /*
+ * This field indicates the IP type for the inner-most IP
+ * header. A value of '0' indicates IPv4. A value of '1'
+ * indicates IPv6.
+ */
+ #define RX_TPA_START_CMPL_FLAGS2_IP_TYPE UINT32_C(0x100)
+ uint32_t metadata;
+ /*
+ * This is data from the CFA block as indicated by the
+ * meta_format field.
+ */
+ /* When meta_format=1, this value is the VLAN VID. */
+ #define RX_TPA_START_CMPL_METADATA_VID_MASK UINT32_C(0xfff)
+ #define RX_TPA_START_CMPL_METADATA_VID_SFT 0
+ /* When meta_format=1, this value is the VLAN DE. */
+ #define RX_TPA_START_CMPL_METADATA_DE UINT32_C(0x1000)
+ /* When meta_format=1, this value is the VLAN PRI. */
+ #define RX_TPA_START_CMPL_METADATA_PRI_MASK UINT32_C(0xe000)
+ #define RX_TPA_START_CMPL_METADATA_PRI_SFT 13
+ /* When meta_format=1, this value is the VLAN TPID. */
+ #define RX_TPA_START_CMPL_METADATA_TPID_MASK UINT32_C(0xffff0000)
+ #define RX_TPA_START_CMPL_METADATA_TPID_SFT 16
+ uint16_t v2;
+ /* unused4 is 15 b */
+ /*
+ * This value is written by the NIC such that it will be
+ * different for each pass through the completion queue. The
+ * even passes will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_START_CMPL_V2 UINT32_C(0x1)
+ /* unused4 is 15 b */
+ uint16_t cfa_code;
+ /*
+ * This field identifies the CFA action rule that was used for
+ * this packet.
+ */
+ uint32_t inner_l4_size_inner_l3_offset_inner_l2_offset_outer_l3_offset;
+ /*
+ * This is the size in bytes of the inner most L4 header. This
+ * can be subtracted from the payload_offset to determine the
+ * start of the inner most L4 header.
+ */
+ /*
+ * This is the offset from the beginning of the packet in bytes
+ * for the outer L3 header. If there is no outer L3 header, then
+ * this value is zero.
+ */
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_MASK UINT32_C(0x1ff)
+ #define RX_TPA_START_CMPL_OUTER_L3_OFFSET_SFT 0
+ /*
+ * This is the offset from the beginning of the packet in bytes
+ * for the inner most L2 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_MASK UINT32_C(0x3fe00)
+ #define RX_TPA_START_CMPL_INNER_L2_OFFSET_SFT 9
+ /*
+ * This is the offset from the beginning of the packet in bytes
+ * for the inner most L3 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_MASK UINT32_C(0x7fc0000)
+ #define RX_TPA_START_CMPL_INNER_L3_OFFSET_SFT 18
+ /*
+ * This is the size in bytes of the inner most L4 header. This
+ * can be subtracted from the payload_offset to determine the
+ * start of the inner most L4 header.
+ */
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_MASK UINT32_C(0xf8000000)
+ #define RX_TPA_START_CMPL_INNER_L4_SIZE_SFT 27
+} __attribute__((packed));
+
+/* RX TPA End Completion Record (32 bytes split to 2 16-byte struct) */
+struct rx_tpa_end_cmpl {
+ uint16_t flags_type;
+ /*
+ * This field indicates the exact type of the completion. By
+ * convention, the LSB identifies the length of the record in
+ * 16B units. Even values indicate 16B records. Odd values
+ * indicate 32B records.
+ */
+ #define RX_TPA_END_CMPL_TYPE_MASK UINT32_C(0x3f)
+ #define RX_TPA_END_CMPL_TYPE_SFT 0
+ /*
+ * RX L2 TPA End Completion: Completion at the
+ * end of a TPA operation. Length = 32B
+ */
+ #define RX_TPA_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ /*
+ * When this bit is '1', it indicates a packet that has an error
+ * of some type. Type of error is indicated in error_flags.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ /* This field indicates how the packet was placed in the buffer. */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ /*
+ * Jumbo: TPA Packet was placed using jumbo
+ * algorithm. This means that the first buffer
+ * will be filled with data before moving to
+ * aggregation buffers. Each aggregation buffer
+ * will be filled before moving to the next
+ * aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_JUMBO (UINT32_C(0x1) << 7)
+ /*
+ * Header/Data Separation: Packet was placed
+ * using Header/Data separation algorithm. The
+ * separation location is indicated by the itype
+ * field.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_HDS (UINT32_C(0x2) << 7)
+ /*
+ * GRO/Jumbo: Packet will be placed using
+ * GRO/Jumbo where the first packet is filled
+ * with data. Subsequent packets will be placed
+ * such that any one packet does not span two
+ * aggregation buffers unless it starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_JUMBO (UINT32_C(0x5) << 7)
+ /*
+ * GRO/Header-Data Separation: Packet will be
+ * placed using GRO/HDS where the header is in
+ * the first packet. Payload of each packet will
+ * be placed such that any one packet does not
+ * span two aggregation buffers unless it starts
+ * at the beginning of an aggregation buffer.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS (UINT32_C(0x6) << 7)
+ #define RX_TPA_END_CMPL_FLAGS_PLACEMENT_LAST \
+ RX_TPA_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
+ /* unused is 2 b */
+ #define RX_TPA_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
+ #define RX_TPA_END_CMPL_FLAGS_UNUSED_SFT 10
+ /*
+ * This value indicates what the inner packet determined for the
+ * packet was. - 2 TCP Packet Indicates that the packet was IP
+ * and TCP. This indicates that the ip_cs field is valid and
+ * that the tcp_udp_cs field is valid and contains the TCP
+ * checksum. This also indicates that the payload_offset field
+ * is valid.
+ */
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
+ #define RX_TPA_END_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_TPA_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
+ #define RX_TPA_END_CMPL_FLAGS_SFT 6
+ uint16_t len;
+ /*
+ * This value is zero for TPA End completions. There is no data
+ * in the buffer that corresponds to the opaque value in this
+ * completion.
+ */
+ uint32_t opaque;
+ /*
+ * This is a copy of the opaque field from the RX BD this
+ * completion corresponds to.
+ */
+ uint8_t agg_bufs_v1;
+ /* unused1 is 1 b */
+ /*
+ * This value is written by the NIC such that it will be
+ * different for each pass through the completion queue. The
+ * even passes will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_END_CMPL_V1 UINT32_C(0x1)
+ /*
+ * This value is the number of aggregation buffers that follow
+ * this entry in the completion ring that are a part of this
+ * aggregation packet. If the value is zero, then the packet is
+ * completely contained in the buffer space provided in the
+ * aggregation start completion.
+ */
+ #define RX_TPA_END_CMPL_AGG_BUFS_MASK UINT32_C(0x7e)
+ #define RX_TPA_END_CMPL_AGG_BUFS_SFT 1
+ /* unused1 is 1 b */
+ uint8_t tpa_segs;
+ /* This value is the number of segments in the TPA operation. */
+ uint8_t payload_offset;
+ /*
+ * This value indicates the offset in bytes from the beginning
+ * of the packet where the inner payload starts. This value is
+ * valid for TCP, UDP, FCoE, and RoCE packets. A value of zero
+ * indicates an offset of 256 bytes.
+ */
+ uint8_t agg_id;
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ /* unused2 is 1 b */
+ /*
+ * This is the aggregation ID that the completion is associated
+ * with. Use this number to correlate the TPA start completion
+ * with the TPA end completion.
+ */
+ #define RX_TPA_END_CMPL_AGG_ID_MASK UINT32_C(0xfe)
+ #define RX_TPA_END_CMPL_AGG_ID_SFT 1
+ uint32_t tsdelta;
+ /*
+ * For non-GRO packets, this value is the timestamp delta
+ * between earliest and latest timestamp values for TPA packet.
+ * If packets were not time stamped, then delta will be zero.
+ * For GRO packets, this field is zero except for the following
+ * sub-fields. - tsdelta[31] Timestamp present indication. When
+ * '0', no Timestamp option is in the packet. When '1', then a
+ * Timestamp option is present in the packet.
+ */
+} __attribute__((packed));
+
+/* last 16 bytes of RX TPA End Completion Record */
+struct rx_tpa_end_cmpl_hi {
+ uint32_t tpa_dup_acks;
+ /* unused3 is 28 b */
+ /*
+ * This value is the number of duplicate ACKs that have been
+ * received as part of the TPA operation.
+ */
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_MASK UINT32_C(0xf)
+ #define RX_TPA_END_CMPL_TPA_DUP_ACKS_SFT 0
+ /* unused3 is 28 b */
+ uint16_t tpa_seg_len;
+ /*
+ * This value is the valid when TPA completion is active. It
+ * indicates the length of the longest segment of the TPA
+ * operation for LRO mode and the length of the first segment in
+ * GRO mode. This value may be used by GRO software to re-
+ * construct the original packet stream from the TPA packet.
+ * This is the length of all but the last segment for GRO. In
+ * LRO mode this value may be used to indicate MSS size to the
+ * stack.
+ */
+ uint16_t unused_3;
+ /* unused4 is 16 b */
+ uint16_t errors_v2;
+ /*
+ * This value is written by the NIC such that it will be
+ * different for each pass through the completion queue. The
+ * even passes will write 1. The odd passes will write 0.
+ */
+ #define RX_TPA_END_CMPL_V2 UINT32_C(0x1)
+ /*
+ * This error indicates that there was some sort of problem with
+ * the BDs for the packet that was found after part of the
+ * packet was already placed. The packet should be treated as
+ * invalid.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_MASK UINT32_C(0xe)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_SFT 1
+ /*
+ * This error occurs when there is a fatal HW
+ * problem in the chip only. It indicates that
+ * there were not BDs on chip but that there was
+ * adequate reservation. provided by the TPA
+ * block.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_NOT_ON_CHIP \
+ (UINT32_C(0x2) << 1)
+ /*
+ * This error occurs when TPA block was not
+ * configured to reserve adequate BDs for TPA
+ * operations on this RX ring. All data for the
+ * TPA operation was not placed. This error can
+ * also be generated when the number of segments
+ * is not programmed correctly in TPA and the 33
+ * total aggregation buffers allowed for the TPA
+ * operation has been exceeded.
+ */
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR \
+ (UINT32_C(0x4) << 1)
+ #define RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_LAST \
+ RX_TPA_END_CMPL_ERRORS_BUFFER_ERROR_RSV_ERROR
+ #define RX_TPA_END_CMPL_ERRORS_MASK UINT32_C(0xfffe)
+ #define RX_TPA_END_CMPL_ERRORS_SFT 1
+ uint16_t unused_4;
+ /* unused5 is 16 b */
+ uint32_t start_opaque;
+ /*
+ * This is the opaque value that was completed for the TPA start
+ * completion that corresponds to this TPA end completion.
+ */
+} __attribute__((packed));
+
+/* HWRM Forwarded Request (16 bytes) */
struct hwrm_fwd_req_cmpl {
uint16_t req_len_type;
/* Length of forwarded request in bytes. */
#define HWRM_FWD_REQ_CMPL_REQ_BUF_ADDR_SFT 1
} __attribute__((packed));
-/* HWRM Asynchronous Event Completion Record (16 bytes) */
+/* HWRM Asynchronous Event Completion Record (16 bytes) */
struct hwrm_async_event_cmpl {
uint16_t type;
/* unused1 is 10 b */
/* Link MTU changed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_MTU_CHANGE UINT32_C(0x1)
/* Link speed changed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CHANGE UINT32_C(0x2)
/* DCB Configuration changed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_DCB_CONFIG_CHANGE UINT32_C(0x3)
/* Port connection not allowed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_CONN_NOT_ALLOWED UINT32_C(0x4)
/* Link speed configuration was not allowed */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED UINT32_C(0x5)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_NOT_ALLOWED \
+ UINT32_C(0x5)
/* Link speed configuration change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_LINK_SPEED_CFG_CHANGE UINT32_C(0x6)
/* Port PHY configuration change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PORT_PHY_CFG_CHANGE UINT32_C(0x7)
/* Function driver unloaded */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD UINT32_C(0x10)
/* Function driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_LOAD UINT32_C(0x11)
/* Function FLR related processing has completed */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_UNLOAD UINT32_C(0x20)
/* PF driver loaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_DRVR_LOAD UINT32_C(0x21)
- /* VF Function Level Reset (FLR) */
+ /* VF Function Level Reset (FLR) */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_FLR UINT32_C(0x30)
/* VF MAC Address Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_MAC_ADDR_CHANGE UINT32_C(0x31)
/* PF-VF communication channel status change. */
- #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE UINT32_C(0x32)
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PF_VF_COMM_STATUS_CHANGE \
+ UINT32_C(0x32)
/* VF Configuration Change */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE UINT32_C(0x33)
/* HWRM Error */
#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_MASK UINT32_C(0xfe)
#define HWRM_ASYNC_EVENT_CMPL_OPAQUE_SFT 1
uint8_t timestamp_lo;
- /* 8-lsb timestamp from POR (100-msec resolution) */
+ /* 8-lsb timestamp from POR (100-msec resolution) */
uint16_t timestamp_hi;
- /* 16-lsb timestamp from POR (100-msec resolution) */
+ /* 16-lsb timestamp from POR (100-msec resolution) */
uint32_t event_data1;
/* Event specific data */
} __attribute__((packed));
-/*
- * Note: The Hardware Resource Manager (HWRM) manages various hardware resources
- * inside the chip. The HWRM is implemented in firmware, and runs on embedded
- * processors inside the chip. This firmware service is vital part of the chip.
- * The chip can not be used by a driver or HWRM client without the HWRM.
- */
-
-/* Input (16 bytes) */
-struct input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
- */
-} __attribute__((packed));
-
-/* Output (8 bytes) */
-struct output {
- uint16_t error_code;
- /*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
- */
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
- /*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
- */
-} __attribute__((packed));
-
-/* hwrm_ver_get */
+/* hwrm_ver_get */
/*
* Description: This function is called by a driver to determine the HWRM
* interface version supported by the HWRM firmware, the version of HWRM
* interface or firmware version with major = 0, minor = 0, and update = 0 shall
* be considered an invalid version.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_ver_get_input {
uint16_t req_type;
/*
uint8_t unused_0[5];
} __attribute__((packed));
-/* Output (128 bytes) */
+/* Output (128 bytes) */
struct hwrm_ver_get_output {
uint16_t error_code;
/*
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version of the HWRM
+ * tied to a specific (major,minor,update) version of the HWRM
* firmware.
*/
uint8_t mgmt_fw_maj;
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version
+ * tied to a specific (major,minor,update) version
*/
uint8_t netctrl_fw_maj;
/*
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version
+ * tied to a specific (major,minor,update) version
*/
uint32_t dev_caps_cfg;
/*
* supported. If set to 0, then secure firmware update behavior
* is not supported.
*/
- #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED UINT32_C(0x1)
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SECURE_FW_UPD_SUPPORTED \
+ UINT32_C(0x1)
/*
* If set to 1, then firmware based DCBX agent is supported. If
* set to 0, then firmware based DCBX agent capability is not
* supported on this device.
*/
- #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED UINT32_C(0x2)
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_FW_DCBX_AGENT_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then HWRM short command format is supported. If
+ * set to 0, then HWRM short command format is not supported.
+ */
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, then HWRM short command format is required. If
+ * set to 0, then HWRM short command format is not required.
+ */
+ #define HWRM_VER_GET_OUTPUT_DEV_CAPS_CFG_SHORT_CMD_INPUTUIRED \
+ UINT32_C(0x8)
uint8_t roce_fw_maj;
/*
* This field represents the major version of RoCE firmware. A
/*
* This field is a reserved field. This field can be used to
* represent firmware branches or customer specific releases
- * tied to a specific (major,minor,update) version
+ * tied to a specific (major,minor,update) version
*/
char hwrm_fw_name[16];
/*
- * This field represents the name of HWRM FW (ASCII chars with
+ * This field represents the name of HWRM FW (ASCII chars with
* NULL at the end).
*/
char mgmt_fw_name[16];
/*
- * This field represents the name of mgmt FW (ASCII chars with
+ * This field represents the name of mgmt FW (ASCII chars with
* NULL at the end).
*/
char netctrl_fw_name[16];
/*
* This field represents the name of network control firmware
- * (ASCII chars with NULL at the end).
+ * (ASCII chars with NULL at the end).
*/
uint32_t reserved2[4];
/*
*/
char roce_fw_name[16];
/*
- * This field represents the name of RoCE FW (ASCII chars with
+ * This field represents the name of RoCE FW (ASCII chars with
* NULL at the end).
*/
uint16_t chip_num;
/* FPGA platform of the chip. */
#define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_FPGA UINT32_C(0x1)
/* Palladium platform of the chip. */
- #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2)
+ #define HWRM_VER_GET_OUTPUT_CHIP_PLATFORM_TYPE_PALLADIUM UINT32_C(0x2)
uint16_t max_req_win_len;
/*
* This field returns the maximum value of request window that
/* hwrm_func_reset */
/*
- * Description: This command resets a hardware function (PCIe function) and
+ * Description: This command resets a hardware function (PCIe function) and
* frees any resources used by the function. This command shall be initiated by
* the driver after an FLR has occurred to prepare the function for re-use. This
* command may also be initiated by a driver prior to doing it's own
* idled. The command returns all the resources owned by the function so a new
* driver may allocate and configure resources normally.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_func_reset_input {
uint16_t req_type;
/*
/* This value indicates the level of a function reset. */
/*
* Reset the caller function and its children
- * VFs (if any). If no children functions exist,
+ * VFs (if any). If no children functions exist,
* then reset the caller function only.
*/
#define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETALL UINT32_C(0x0)
* It is an error to specify this level by a PF
* driver with no children VFs.
*/
- #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN UINT32_C(0x2)
+ #define HWRM_FUNC_RESET_INPUT_FUNC_RESET_LEVEL_RESETCHILDREN \
+ UINT32_C(0x2)
/*
* Reset a specific VF of the caller function
* driver if the caller is the parent PF driver.
uint8_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
+/* Output (16 bytes) */
struct hwrm_func_reset_output {
uint16_t error_code;
/*
* physical function. The output FID value is needed to configure Rings and
* MSI-X vectors so their DMA operations appear correctly on the PCI bus.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_func_qcaps_input {
uint16_t req_type;
/*
uint16_t fid;
/*
* Function ID of the function that is being queried. 0xFF...
- * (All Fs) if the query is for the requesting function.
+ * (All Fs) if the query is for the requesting function.
*/
uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (80 bytes) */
+/* Output (80 bytes) */
struct hwrm_func_qcaps_output {
uint16_t error_code;
/*
uint16_t port_id;
/*
* Port ID of port that this function is associated with. Valid
- * only for the PF. 0xFF... (All Fs) if this function is not
- * associated with any port. 0xFF... (All Fs) if this function
+ * only for the PF. 0xFF... (All Fs) if this function is not
+ * associated with any port. 0xFF... (All Fs) if this function
* is called from a VF.
*/
uint32_t flags;
/* If 1, then Push mode is supported on this function. */
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PUSH_MODE_SUPPORTED UINT32_C(0x1)
/*
* If 1, then the global MSI-X auto-masking is enabled for the
* device.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING UINT32_C(0x2)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_GLOBAL_MSIX_AUTOMASKING \
+ UINT32_C(0x2)
/*
- * If 1, then the Precision Time Protocol (PTP) processing is
+ * If 1, then the Precision Time Protocol (PTP) processing is
* supported on this function. The HWRM should enable PTP on
- * only a single Physical Function (PF) per port.
+ * only a single Physical Function (PF) per port.
*/
#define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_PTP_SUPPORTED UINT32_C(0x4)
/*
- * If 1, then RDMA over Converged Ethernet (RoCE) v1 is
+ * If 1, then RDMA over Converged Ethernet (RoCE) v1 is
* supported on this function.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V1_SUPPORTED UINT32_C(0x8)
/*
- * If 1, then RDMA over Converged Ethernet (RoCE) v2 is
+ * If 1, then RDMA over Converged Ethernet (RoCE) v2 is
* supported on this function.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_ROCE_V2_SUPPORTED UINT32_C(0x10)
/*
* If 1, then control and configuration of WoL magic packet are
* supported on this function.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED UINT32_C(0x20)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_MAGICPKT_SUPPORTED \
+ UINT32_C(0x20)
/*
* If 1, then control and configuration of bitmap pattern packet
* are supported on this function.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_WOL_BMP_SUPPORTED UINT32_C(0x40)
/*
* If set to 1, then the control and configuration of rate limit
* of an allocated TX ring on the queried function is supported.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_RING_RL_SUPPORTED UINT32_C(0x80)
/*
* If 1, then control and configuration of minimum and maximum
* bandwidths are supported on the queried function.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_TX_BW_CFG_SUPPORTED UINT32_C(0x100)
/*
* If the query is for a VF, then this flag shall be ignored. If
* this query is for a PF and this flag is set to 1, then the PF
* set to 0, then the PF does not have the capability to set the
* rate limits on the TX rings of its children VFs.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED UINT32_C(0x200)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_TX_RING_RL_SUPPORTED \
+ UINT32_C(0x200)
/*
* If the query is for a VF, then this flag shall be ignored. If
* this query is for a PF and this flag is set to 1, then the PF
* capability to set the minimum or maximum bandwidths for its
* children VFs.
*/
- #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400)
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_VF_BW_CFG_SUPPORTED UINT32_C(0x400)
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then standard TX ring mode is supported on the
+ * queried function. If set to 0, then standard TX ring mode is
+ * not available on the queried function.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_FLAGS_STD_TX_RING_MODE_SUPPORTED \
+ UINT32_C(0x800)
uint8_t mac_address[6];
/*
* This value is current MAC address configured for this
uint16_t first_vf_id;
/*
* The identifier for the first VF enabled on a PF. This is
- * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
+ * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
* this command is called on a PF with SR-IOV disabled or on a
* VF.
*/
/*
* The maximum number of VFs that can be allocated to the
* function. This is valid only on the PF with SR-IOV enabled.
- * 0xFF... (All Fs) if this command is called on a PF with SR-
+ * 0xFF... (All Fs) if this command is called on a PF with SR-
* IOV disabled or on a VF.
*/
uint16_t max_stat_ctx;
*/
uint32_t max_tx_em_flows;
/*
- * The maximum number of Exact Match (EM) flows that can be
+ * The maximum number of Exact Match (EM) flows that can be
* offloaded by this function on the TX side.
*/
uint32_t max_tx_wm_flows;
/*
- * The maximum number of Wildcard Match (WM) flows that can be
+ * The maximum number of Wildcard Match (WM) flows that can be
* offloaded by this function on the TX side.
*/
uint32_t max_rx_em_flows;
/*
- * The maximum number of Exact Match (EM) flows that can be
+ * The maximum number of Exact Match (EM) flows that can be
* offloaded by this function on the RX side.
*/
uint32_t max_rx_wm_flows;
/*
- * The maximum number of Wildcard Match (WM) flows that can be
+ * The maximum number of Wildcard Match (WM) flows that can be
* offloaded by this function on the RX side.
*/
uint32_t max_mcast_filters;
* be allocated to the function. This number indicates the
* maximum number of TX rings that can be assigned strict
* priorities out of the maximum number of TX rings that can be
- * allocated (max_tx_rings) to the function.
+ * allocated (max_tx_rings) to the function.
*/
uint8_t unused_0;
uint8_t valid;
* allows a physical function driver to query virtual functions that are
* children of the physical function. The output FID value is needed to
* configure Rings and MSI-X vectors so their DMA operations appear correctly on
- * the PCI bus.
+ * the PCI bus. This command should be called by every driver after
+ * 'hwrm_func_cfg' to get the actual number of resources allocated by the HWRM.
+ * The values returned by hwrm_func_qcfg are the values the driver shall use.
+ * These values may be different than what was originally requested in the
+ * 'hwrm_func_cfg' command.
*/
-/* Input (24 bytes) */
+/* Input (24 bytes) */
struct hwrm_func_qcfg_input {
uint16_t req_type;
/*
uint16_t fid;
/*
* Function ID of the function that is being queried. 0xFF...
- * (All Fs) if the query is for the requesting function.
+ * (All Fs) if the query is for the requesting function.
*/
uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (72 bytes) */
+/* Output (72 bytes) */
struct hwrm_func_qcfg_output {
uint16_t error_code;
/*
uint16_t port_id;
/*
* Port ID of port that this function is associated with.
- * 0xFF... (All Fs) if this function is not associated with any
+ * 0xFF... (All Fs) if this function is not associated with any
* port.
*/
uint16_t vlan;
* This value is the current VLAN setting for this function. The
* value of 0 for this field indicates no priority tagging or
* VLAN is used. This field's format is same as 802.1Q Tag's Tag
- * Control Information (TCI) format that includes both Priority
- * Code Point (PCP) and VLAN Identifier (VID).
+ * Control Information (TCI) format that includes both Priority
+ * Code Point (PCP) and VLAN Identifier (VID).
*/
uint16_t flags;
/*
* If 1, then magic packet based Out-Of-Box WoL is enabled on
* the port associated with this function.
*/
- #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_OOB_WOL_MAGICPKT_ENABLED \
UINT32_C(0x1)
/*
* If 1, then bitmap pattern based Out-Of-Box WoL packet is
* on the port associated with this function. If set to 0, then
* DCBX agent is not running in the firmware.
*/
- #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_DCBX_AGENT_ENABLED \
UINT32_C(0x4)
+ /*
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then standard TX ring mode is enabled on the
+ * queried function. If set to 0, then the standard TX ring mode
+ * is disabled on the queried function. In this extended TX ring
+ * resource mode, the minimum and maximum bandwidth settings are
+ * not supported to allow the allocation of TX rings to span
+ * multiple scheduler nodes.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_STD_TX_RING_MODE_ENABLED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1 then FW based LLDP agent is enabled and running
+ * on the port associated with this function. If set to 0 then
+ * the LLDP agent is not running in the firmware.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_FW_LLDP_AGENT_ENABLED UINT32_C(0x10)
+ /*
+ * If set to 1, then multi-host mode is active for this
+ * function. If set to 0, then multi-host mode is inactive for
+ * this function or not applicable for this device.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_MULTI_HOST UINT32_C(0x20)
uint8_t mac_address[6];
/*
* This value is current MAC address configured for this
uint16_t pci_id;
/*
* This value is current PCI ID of this function. If ARI is
- * enabled, then it is Bus Number (8b):Function Number(8b).
- * Otherwise, it is Bus Number (8b):Device Number (4b):Function
+ * enabled, then it is Bus Number (8b):Function Number(8b).
+ * Otherwise, it is Bus Number (8b):Device Number (4b):Function
* Number(4b).
*/
uint16_t alloc_rsscos_ctx;
/* Multiple physical functions */
#define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_MPFS UINT32_C(0x1)
/* Network Partitioning 1.0 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 \
- UINT32_C(0x2)
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_0 UINT32_C(0x2)
/* Network Partitioning 1.5 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 \
- UINT32_C(0x3)
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR1_5 UINT32_C(0x3)
/* Network Partitioning 2.0 */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 \
- UINT32_C(0x4)
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_NPAR2_0 UINT32_C(0x4)
/* Unknown */
- #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t unused_0;
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PARTITION_TYPE_UNKNOWN UINT32_C(0xff)
+ uint8_t port_pf_cnt;
+ /*
+ * This field will indicate number of physical functions on this
+ * port_partition. HWRM shall return unavail (i.e. value of 0)
+ * for this field when this command is used to query VF's
+ * configuration or from older firmware that doesn't support
+ * this field.
+ */
+ /* number of PFs is not available */
+ #define HWRM_FUNC_QCFG_OUTPUT_PORT_PF_CNT_UNAVAIL UINT32_C(0x0)
uint16_t dflt_vnic_id;
/* The default VNIC ID assigned to a function that is being queried. */
+ uint8_t unused_0;
uint8_t unused_1;
- uint8_t unused_2;
uint32_t min_bw;
/*
* Minimum BW allocated for this function. The HWRM will
* for the scheduler inside the device. A value of 0 indicates
* the minimum bandwidth is not configured.
*/
- /* Bandwidth value */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_SFT 0
- /* Reserved */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_RSVD UINT32_C(0x10000000)
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_SCALE_LAST \
+ FUNC_QCFG_OUTPUT_MIN_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mbps */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MBPS \
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
(UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
- #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
+ #define HWRM_FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_LAST \
FUNC_QCFG_OUTPUT_MIN_BW_BW_VALUE_UNIT_INVALID
uint32_t max_bw;
/*
* for the scheduler inside the device. A value of 0 indicates
* that the maximum bandwidth is not configured.
*/
- /* Bandwidth value */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
+ /* The bandwidth value. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_SFT 0
- /* Reserved */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_RSVD UINT32_C(0x10000000)
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES \
+ (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_SCALE_LAST \
+ FUNC_QCFG_OUTPUT_MAX_BW_SCALE_BYTES
/* bw_value_unit is 3 b */
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MASK \
UINT32_C(0xe0000000)
#define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mbps */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MBPS \
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
(UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
/* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
(UINT32_C(0x1) << 29)
/* Invalid unit */
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
(UINT32_C(0x7) << 29)
- #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ #define HWRM_FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_LAST \
FUNC_QCFG_OUTPUT_MAX_BW_BW_VALUE_UNIT_INVALID
uint8_t evb_mode;
/*
* This value indicates the Edge virtual bridge mode for the
* domain that this function belongs to.
*/
- /* No Edge Virtual Bridging (EVB) */
+ /* No Edge Virtual Bridging (EVB) */
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
- /* Virtual Ethernet Bridge (VEB) */
+ /* Virtual Ethernet Bridge (VEB) */
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEB UINT32_C(0x1)
- /* Virtual Ethernet Port Aggregator (VEPA) */
+ /* Virtual Ethernet Port Aggregator (VEPA) */
#define HWRM_FUNC_QCFG_OUTPUT_EVB_MODE_VEPA UINT32_C(0x2)
- uint8_t unused_3;
+ uint8_t unused_2;
uint16_t alloc_vfs;
/*
* The number of VFs that are allocated to the function. This is
- * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
+ * valid only on the PF with SR-IOV enabled. 0xFF... (All Fs) if
* this command is called on a PF with SR-IOV disabled or on a
* VF.
*/
uint16_t alloc_sp_tx_rings;
/*
* The number of strict priority transmit rings out of currently
- * allocated TX rings to the function (alloc_tx_rings).
+ * allocated TX rings to the function (alloc_tx_rings).
*/
- uint8_t unused_4;
+ uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_func_drv_rgtr */
+/* hwrm_func_vlan_qcfg */
/*
- * Description: This command is used by the function driver to register its
- * information with the HWRM. A function driver shall implement this command. A
- * function driver shall use this command during the driver initialization right
- * after the HWRM version discovery and default ring resources allocation.
+ * Description: This command should be called by PF driver to get the current
+ * C-TAG, S-TAG and correcponsing PCP and TPID values configured for the
+ * function.
*/
-/* Input (80 bytes) */
-struct hwrm_func_drv_rgtr_input {
+/* Input (24 bytes) */
+struct hwrm_func_vlan_qcfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
- /*
- * When this bit is '1', the function driver is requesting all
- * requests from its children VF drivers to be forwarded to
- * itself. This flag can only be set by the PF driver. If a VF
- * driver sets this flag, it should be ignored by the HWRM.
- */
- #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1)
- /*
- * When this bit is '1', the function is requesting none of the
- * requests from its children VF drivers to be forwarded to
- * itself. This flag can only be set by the PF driver. If a VF
- * driver sets this flag, it should be ignored by the HWRM.
- */
- #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2)
- uint32_t enables;
- /* This bit must be '1' for the os_type field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1)
- /* This bit must be '1' for the ver field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2)
- /* This bit must be '1' for the timestamp field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4)
- /* This bit must be '1' for the vf_req_fwd field to be configured. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD UINT32_C(0x8)
- /*
- * This bit must be '1' for the async_event_fwd field to be
- * configured.
- */
- #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD UINT32_C(0x10)
- uint16_t os_type;
- /* This value indicates the type of OS. */
- /* Unknown */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
- /* Other OS not listed below. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1)
- /* MSDOS OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe)
- /* Windows OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12)
- /* Solaris OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d)
- /* Linux OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24)
- /* FreeBSD OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a)
- /* VMware ESXi OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68)
- /* Microsoft Windows 8 64-bit OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73)
- /* Microsoft Windows Server 2012 R2 OS. */
- #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74)
- uint8_t ver_maj;
- /* This is the major version of the driver. */
- uint8_t ver_min;
- /* This is the minor version of the driver. */
- uint8_t ver_upd;
- /* This is the update version of the driver. */
- uint8_t unused_0;
- uint16_t unused_1;
- uint32_t timestamp;
- /*
- * This is a 32-bit timestamp provided by the driver for keep
- * alive. The timestamp is in multiples of 1ms.
- */
- uint32_t unused_2;
- uint32_t vf_req_fwd[8];
- /*
- * This is a 256-bit bit mask provided by the PF driver for
- * letting the HWRM know what commands issued by the VF driver
- * to the HWRM should be forwarded to the PF driver. Nth bit
- * refers to the Nth req_type. Setting Nth bit to 1 indicates
- * that requests from the VF driver with req_type equal to N
- * shall be forwarded to the parent PF driver. This field is not
- * valid for the VF driver.
- */
- uint32_t async_event_fwd[8];
+ uint16_t fid;
/*
- * This is a 256-bit bit mask provided by the function driver
- * (PF or VF driver) to indicate the list of asynchronous event
- * completions to be forwarded. Nth bit refers to the Nth
- * event_id. Setting Nth bit to 1 by the function driver shall
- * result in the HWRM forwarding asynchronous event completion
- * with event_id equal to N. If all bits are set to 0 (value of
- * 0), then the HWRM shall not forward any asynchronous event
- * completion to this function driver.
+ * Function ID of the function that is being configured. If set
+ * to 0xFF... (All Fs), then the configuration is for the
+ * requesting function.
*/
-} __attribute__((packed));
+ uint16_t unused_0[3];
+};
-/* Output (16 bytes) */
-struct hwrm_func_drv_rgtr_output {
+/* Output (40 bytes) */
+struct hwrm_func_vlan_qcfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* internal processor, the order of writes has to be such that
* this field is written last.
*/
-} __attribute__((packed));
+ uint16_t stag_vid;
+ /* S-TAG VLAN identifier configured for the function. */
+ uint8_t stag_pcp;
+ /* S-TAG PCP value configured for the function. */
+ uint8_t unused_4;
+ uint16_t stag_tpid;
+ /*
+ * S-TAG TPID value configured for the function. This field is
+ * specified in network byte order.
+ */
+ uint16_t ctag_vid;
+ /* C-TAG VLAN identifier configured for the function. */
+ uint8_t ctag_pcp;
+ /* C-TAG PCP value configured for the function. */
+ uint8_t unused_5;
+ uint16_t ctag_tpid;
+ /*
+ * C-TAG TPID value configured for the function. This field is
+ * specified in network byte order.
+ */
+ uint32_t rsvd2;
+ /* Future use. */
+ uint32_t rsvd3;
+ /* Future use. */
+ uint32_t unused_6;
+};
-/* hwrm_func_drv_unrgtr */
+/* hwrm_func_vlan_cfg */
/*
- * Description: This command is used by the function driver to un register with
- * the HWRM. A function driver shall implement this command. A function driver
- * shall use this command during the driver unloading.
+ * Description: This command allows PF driver to configure C-TAG, S-TAG and
+ * corresponding PCP and TPID values for a function.
*/
-/* Input (24 bytes) */
-struct hwrm_func_drv_unrgtr_input {
+/* Input (48 bytes) */
+struct hwrm_func_vlan_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
+ uint16_t fid;
/*
- * When this bit is '1', the function driver is notifying the
- * HWRM to prepare for the shutdown.
+ * Function ID of the function that is being configured. If set
+ * to 0xFF... (All Fs), then the configuration is for the
+ * requesting function.
*/
- #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN UINT32_C(0x1)
- uint32_t unused_0;
-} __attribute__((packed));
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t enables;
+ /* This bit must be '1' for the stag_vid field to be configured. */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_VID UINT32_C(0x1)
+ /* This bit must be '1' for the ctag_vid field to be configured. */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_VID UINT32_C(0x2)
+ /* This bit must be '1' for the stag_pcp field to be configured. */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_PCP UINT32_C(0x4)
+ /* This bit must be '1' for the ctag_pcp field to be configured. */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_PCP UINT32_C(0x8)
+ /* This bit must be '1' for the stag_tpid field to be configured. */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_STAG_TPID UINT32_C(0x10)
+ /* This bit must be '1' for the ctag_tpid field to be configured. */
+ #define HWRM_FUNC_VLAN_CFG_INPUT_ENABLES_CTAG_TPID UINT32_C(0x20)
+ uint16_t stag_vid;
+ /* S-TAG VLAN identifier configured for the function. */
+ uint8_t stag_pcp;
+ /* S-TAG PCP value configured for the function. */
+ uint8_t unused_2;
+ uint16_t stag_tpid;
+ /*
+ * S-TAG TPID value configured for the function. This field is
+ * specified in network byte order.
+ */
+ uint16_t ctag_vid;
+ /* C-TAG VLAN identifier configured for the function. */
+ uint8_t ctag_pcp;
+ /* C-TAG PCP value configured for the function. */
+ uint8_t unused_3;
+ uint16_t ctag_tpid;
+ /*
+ * C-TAG TPID value configured for the function. This field is
+ * specified in network byte order.
+ */
+ uint32_t rsvd1;
+ /* Future use. */
+ uint32_t rsvd2;
+ /* Future use. */
+ uint32_t unused_4;
+};
/* Output (16 bytes) */
-struct hwrm_func_drv_unrgtr_output {
+struct hwrm_func_vlan_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* internal processor, the order of writes has to be such that
* this field is written last.
*/
-} __attribute__((packed));
+};
-/* hwrm_port_phy_cfg */
+/* hwrm_func_cfg */
/*
- * Description: This command configures the PHY device for the port. It allows
- * setting of the most generic settings for the PHY. The HWRM shall complete
- * this command as soon as PHY settings are configured. They may not be applied
- * when the command response is provided. A VF driver shall not be allowed to
- * configure PHY using this command. In a network partition mode, a PF driver
- * shall not be allowed to configure PHY using this command.
+ * Description: This command allows configuration of a PF by the corresponding
+ * PF driver. This command also allows configuration of a child VF by its parent
+ * PF driver. The input FID value is used to indicate what function is being
+ * configured. This allows a PF driver to configure the PF owned by itself or a
+ * virtual function that is a child of the PF. This command allows to reserve
+ * resources for a VF by its parent PF. To reverse the process, the command
+ * should be called with all enables flags cleared for resources. This will free
+ * allocated resources for the VF and return them to the resource pool. If this
+ * command is requested by a VF driver to configure or reserve resources, then
+ * the HWRM shall fail this command. If default MAC address and/or VLAN are
+ * provided in this command, then the HWRM shall set up appropriate MAC/VLAN
+ * filters for the function that is being configured. If source properties
+ * checks are enabled and default MAC address and/or IP address are provided in
+ * this command, then the HWRM shall set appropriate source property checks
+ * based on provided MAC and/or IP addresses. The parent PF driver should not
+ * set MTU/MRU for a VF using this command. This is to allow MTU/MRU setting by
+ * the VF driver. If the MTU or MRU for a VF is set by the PF driver, then the
+ * HWRM should ignore it. A function's MTU/MRU should be set prior to allocating
+ * RX VNICs or TX rings. A PF driver calls hwrm_func_cfg to allocate resources
+ * for itself or its children VFs. All function drivers shall call hwrm_func_cfg
+ * to reserve resources. A request to hwrm_func_cfg may not be fully granted;
+ * that is, a request for resources may be larger than what can be supported by
+ * the device and the HWRM will allocate the best set of resources available,
+ * but that may be less than requested. If all the amounts requested could not
+ * be fulfilled, the HWRM shall allocate what it could and return a status code
+ * of success. A function driver should call hwrm_func_qcfg immediately after
+ * hwrm_func_cfg to determine what resources were assigned to the configured
+ * function. A call by a PF driver to hwrm_func_cfg to allocate resources for
+ * itself shall only allocate resources for the PF driver to use, not for its
+ * children VFs. Likewise, a call to hwrm_func_qcfg shall return the resources
+ * available for the PF driver to use, not what is available to its children
+ * VFs.
*/
-/* Input (56 bytes) */
-struct hwrm_port_phy_cfg_input {
+/* Input (88 bytes) */
+struct hwrm_func_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being configured. If set
+ * to 0xFF... (All Fs), then the the configuration is for the
+ * requesting function.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
uint32_t flags;
/*
- * When this bit is set to '1', the PHY for the port shall be
- * reset. # If this bit is set to 1, then the HWRM shall reset
- * the PHY after applying PHY configuration changes specified in
- * this command. # In order to guarantee that PHY configuration
- * changes specified in this command take effect, the HWRM
- * client should set this flag to 1. # If this bit is not set to
- * 1, then the HWRM may reset the PHY depending on the current
- * PHY configuration and settings specified in this command.
+ * When this bit is '1', the function is disabled with source
+ * MAC address check. This is an anti-spoofing check. If this
+ * flag is set, then the function shall be configured to
+ * disallow transmission of frames with the source MAC address
+ * that is configured for this function.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_DISABLE \
+ UINT32_C(0x1)
/*
- * When this bit is set to '1', the link shall be forced to be
- * taken down. # When this bit is set to '1", all other command
- * input settings related to the link speed shall be ignored.
- * Once the link state is forced down, it can be explicitly
- * cleared from that state by setting this flag to '0'. # If
- * this flag is set to '0', then the link shall be cleared from
- * forced down state if the link is in forced down state. There
- * may be conditions (e.g. out-of-band or sideband configuration
- * changes for the link) outside the scope of the HWRM
- * implementation that may clear forced down link state.
+ * When this bit is '1', the function is enabled with source MAC
+ * address check. This is an anti-spoofing check. If this flag
+ * is set, then the function shall be configured to allow
+ * transmission of frames with the source MAC address that is
+ * configured for this function.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DOWN UINT32_C(0x2)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_SRC_MAC_ADDR_CHECK_ENABLE \
+ UINT32_C(0x2)
+ /* reserved */
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_MASK UINT32_C(0x1fc)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_RSVD_SFT 2
/*
- * When this bit is set to '1', the link shall be forced to the
- * force_link_speed value. When this bit is set to '1', the HWRM
- * client should not enable any of the auto negotiation related
- * fields represented by auto_XXX fields in this command. When
- * this bit is set to '1' and the HWRM client has enabled a
- * auto_XXX field in this command, then the HWRM shall ignore
- * the enabled auto_XXX field. When this bit is set to zero, the
- * link shall be allowed to autoneg.
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then standard TX ring mode is requested to be
+ * enabled on the function being configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE UINT32_C(0x4)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_ENABLE \
+ UINT32_C(0x200)
/*
- * When this bit is set to '1', the auto-negotiation process
- * shall be restarted on the link.
+ * Standard TX Ring mode is used for the allocation of TX ring
+ * and underlying scheduling resources that allow bandwidth
+ * reservation and limit settings on the queried function. If
+ * set to 1, then the standard TX ring mode is requested to be
+ * disabled on the function being configured. In this extended
+ * TX ring resource mode, the minimum and maximum bandwidth
+ * settings are not supported to allow the allocation of TX
+ * rings to span multiple scheduler nodes.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_STD_TX_RING_MODE_DISABLE \
+ UINT32_C(0x400)
/*
- * When this bit is set to '1', Energy Efficient Ethernet (EEE)
- * is requested to be enabled on this link. If EEE is not
- * supported on this port, then this flag shall be ignored by
- * the HWRM.
+ * If this bit is set, virtual mac address configured in this
+ * command will be persistent over warm boot.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE UINT32_C(0x10)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_VIRT_MAC_PERSIST UINT32_C(0x800)
/*
- * When this bit is set to '1', Energy Efficient Ethernet (EEE)
- * is requested to be disabled on this link. If EEE is not
- * supported on this port, then this flag shall be ignored by
- * the HWRM.
+ * This bit only applies to the VF. If this bit is set, the
+ * statistic context counters will not be cleared when the
+ * statistic context is freed or a function reset is called on
+ * VF. This bit will be cleared when the PF is unloaded or a
+ * function reset is called on the PF.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE UINT32_C(0x20)
+ #define HWRM_FUNC_CFG_INPUT_FLAGS_NO_AUTOCLEAR_STATISTIC \
+ UINT32_C(0x1000)
+ uint32_t enables;
+ /* This bit must be '1' for the mtu field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MRU UINT32_C(0x2)
/*
- * When this bit is set to '1' and EEE is enabled on this link,
- * then TX LPI is requested to be enabled on the link. If EEE is
- * not supported on this port, then this flag shall be ignored
- * by the HWRM. If EEE is disabled on this port, then this flag
- * shall be ignored by the HWRM.
+ * This bit must be '1' for the num_rsscos_ctxs field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE UINT32_C(0x40)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RSSCOS_CTXS UINT32_C(0x4)
/*
- * When this bit is set to '1' and EEE is enabled on this link,
- * then TX LPI is requested to be disabled on the link. If EEE
- * is not supported on this port, then this flag shall be
- * ignored by the HWRM. If EEE is disabled on this port, then
- * this flag shall be ignored by the HWRM.
+ * This bit must be '1' for the num_cmpl_rings field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE UINT32_C(0x80)
- /*
- * When set to 1, then the HWRM shall enable FEC
- * autonegotitation on this port if supported. When set to 0,
- * then this flag shall be ignored. If FEC autonegotiation is
- * not supported, then the HWRM shall ignore this flag.
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_CMPL_RINGS UINT32_C(0x8)
+ /* This bit must be '1' for the num_tx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_TX_RINGS UINT32_C(0x10)
+ /* This bit must be '1' for the num_rx_rings field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_RX_RINGS UINT32_C(0x20)
+ /* This bit must be '1' for the num_l2_ctxs field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_L2_CTXS UINT32_C(0x40)
+ /* This bit must be '1' for the num_vnics field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_VNICS UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the num_stat_ctxs field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE UINT32_C(0x100)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_STAT_CTXS UINT32_C(0x100)
/*
- * When set to 1, then the HWRM shall disable FEC
- * autonegotiation on this port if supported. When set to 0,
- * then this flag shall be ignored. If FEC autonegotiation is
- * not supported, then the HWRM shall ignore this flag.
+ * This bit must be '1' for the dflt_mac_addr field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE UINT32_C(0x200)
- /*
- * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire
- * Code) on this port if supported. When set to 0, then this
- * flag shall be ignored. If FEC CLAUSE 74 is not supported,
- * then the HWRM shall ignore this flag.
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x200)
+ /* This bit must be '1' for the dflt_vlan field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_VLAN UINT32_C(0x400)
+ /* This bit must be '1' for the dflt_ip_addr field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_DFLT_IP_ADDR UINT32_C(0x800)
+ /* This bit must be '1' for the min_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MIN_BW UINT32_C(0x1000)
+ /* This bit must be '1' for the max_bw field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MAX_BW UINT32_C(0x2000)
+ /*
+ * This bit must be '1' for the async_event_cr field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE UINT32_C(0x400)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4000)
/*
- * When set to 1, then the HWRM shall disable FEC CLAUSE 74
- * (Fire Code) on this port if supported. When set to 0, then
- * this flag shall be ignored. If FEC CLAUSE 74 is not
- * supported, then the HWRM shall ignore this flag.
+ * This bit must be '1' for the vlan_antispoof_mode field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE UINT32_C(0x800)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_VLAN_ANTISPOOF_MODE UINT32_C(0x8000)
/*
- * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed
- * Solomon) on this port if supported. When set to 0, then this
- * flag shall be ignored. If FEC CLAUSE 91 is not supported,
- * then the HWRM shall ignore this flag.
+ * This bit must be '1' for the allowed_vlan_pris field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE UINT32_C(0x1000)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_ALLOWED_VLAN_PRIS UINT32_C(0x10000)
+ /* This bit must be '1' for the evb_mode field to be configured. */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_EVB_MODE UINT32_C(0x20000)
/*
- * When set to 1, then the HWRM shall disable FEC CLAUSE 91
- * (Reed Solomon) on this port if supported. When set to 0, then
- * this flag shall be ignored. If FEC CLAUSE 91 is not
- * supported, then the HWRM shall ignore this flag.
+ * This bit must be '1' for the num_mcast_filters field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE UINT32_C(0x2000)
- uint32_t enables;
- /* This bit must be '1' for the auto_mode field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1)
- /* This bit must be '1' for the auto_duplex field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX UINT32_C(0x2)
- /* This bit must be '1' for the auto_pause field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE UINT32_C(0x4)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_MCAST_FILTERS UINT32_C(0x40000)
/*
- * This bit must be '1' for the auto_link_speed field to be
+ * This bit must be '1' for the num_hw_ring_grps field to be
* configured.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED UINT32_C(0x8)
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_NUM_HW_RING_GRPS UINT32_C(0x80000)
+ uint16_t mtu;
/*
- * This bit must be '1' for the auto_link_speed_mask field to be
- * configured.
+ * The maximum transmission unit of the function. The HWRM
+ * should make sure that the mtu of the function does not exceed
+ * the mtu of the physical port that this function is associated
+ * with. In addition to configuring mtu per function, it is
+ * possible to configure mtu per transmit ring. By default, the
+ * mtu of each transmit ring associated with a function is equal
+ * to the mtu of the function. The HWRM should make sure that
+ * the mtu of each transmit ring that is assigned to a function
+ * has a valid mtu.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK UINT32_C(0x10)
- /* This bit must be '1' for the wirespeed field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIOUTPUTEED UINT32_C(0x20)
- /* This bit must be '1' for the lpbk field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK UINT32_C(0x40)
- /* This bit must be '1' for the preemphasis field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS UINT32_C(0x80)
- /* This bit must be '1' for the force_pause field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE UINT32_C(0x100)
+ uint16_t mru;
/*
- * This bit must be '1' for the eee_link_speed_mask field to be
- * configured.
+ * The maximum receive unit of the function. The HWRM should
+ * make sure that the mru of the function does not exceed the
+ * mru of the physical port that this function is associated
+ * with. In addition to configuring mru per function, it is
+ * possible to configure mru per vnic. By default, the mru of
+ * each vnic associated with a function is equal to the mru of
+ * the function. The HWRM should make sure that the mru of each
+ * vnic that is assigned to a function has a valid mru.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK UINT32_C(0x200)
- /* This bit must be '1' for the tx_lpi_timer field to be configured. */
- #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER UINT32_C(0x400)
- uint16_t port_id;
- /* Port ID of port that is to be configured. */
- uint16_t force_link_speed;
+ uint16_t num_rsscos_ctxs;
+ /* The number of RSS/COS contexts requested for the function. */
+ uint16_t num_cmpl_rings;
/*
- * This is the speed that will be used if the force bit is '1'.
- * If unsupported speed is selected, an error will be generated.
+ * The number of completion rings requested for the function.
+ * This does not include the rings allocated to any children
+ * functions if any.
*/
- /* 100Mb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
- /* 1Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
- /* 20Mb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
- /* 10Mb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
- uint8_t auto_mode;
+ uint16_t num_tx_rings;
/*
- * This value is used to identify what autoneg mode is used when
- * the link speed is not being forced.
+ * The number of transmit rings requested for the function. This
+ * does not include the rings allocated to any children
+ * functions if any.
*/
+ uint16_t num_rx_rings;
/*
- * Disable autoneg or autoneg disabled. No
- * speeds are selected.
+ * The number of receive rings requested for the function. This
+ * does not include the rings allocated to any children
+ * functions if any.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0)
- /* Select all possible speeds for autoneg mode. */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ uint16_t num_l2_ctxs;
+ /* The requested number of L2 contexts for the function. */
+ uint16_t num_vnics;
+ /* The requested number of vnics for the function. */
+ uint16_t num_stat_ctxs;
+ /* The requested number of statistic contexts for the function. */
+ uint16_t num_hw_ring_grps;
/*
- * Select only the auto_link_speed speed for
- * autoneg mode. This mode has been DEPRECATED.
- * An HWRM client should not use this mode.
+ * The number of HW ring groups that should be reserved for this
+ * function.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ uint8_t dflt_mac_addr[6];
+ /* The default MAC address for the function being configured. */
+ uint16_t dflt_vlan;
/*
- * Select the auto_link_speed or any speed below
- * that speed for autoneg. This mode has been
- * DEPRECATED. An HWRM client should not use
- * this mode.
+ * The default VLAN for the function being configured. This
+ * field's format is same as 802.1Q Tag's Tag Control
+ * Information (TCI) format that includes both Priority Code
+ * Point (PCP) and VLAN Identifier (VID).
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ uint32_t dflt_ip_addr[4];
/*
- * Select the speeds based on the corresponding
- * link speed mask value that is provided.
+ * The default IP address for the function being configured.
+ * This address is only used in enabling source property check.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
- uint8_t auto_duplex;
+ uint32_t min_bw;
/*
- * This is the duplex setting that will be used if the
- * autoneg_mode is "one_speed" or "one_or_below".
+ * Minimum BW allocated for this function. The HWRM will
+ * translate this value into byte counter and time interval used
+ * for the scheduler inside the device.
+ */
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_SCALE_LAST \
+ FUNC_CFG_INPUT_MIN_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_LAST \
+ FUNC_CFG_INPUT_MIN_BW_BW_VALUE_UNIT_INVALID
+ uint32_t max_bw;
+ /*
+ * Maximum BW allocated for this function. The HWRM will
+ * translate this value into byte counter and time interval used
+ * for the scheduler inside the device.
*/
- /* Half Duplex will be requested. */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0)
- /* Full duplex will be requested. */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1)
- /* Both Half and Full dupex will be requested. */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2)
- uint8_t auto_pause;
+ /* The bandwidth value. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_MASK \
+ UINT32_C(0xfffffff)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_SCALE_LAST \
+ FUNC_CFG_INPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ FUNC_CFG_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ uint16_t async_event_cr;
+ /*
+ * ID of the target completion ring for receiving asynchronous
+ * event completions. If this field is not valid, then the HWRM
+ * shall use the default completion ring of the function that is
+ * being configured as the target completion ring for providing
+ * any asynchronous event completions for that function. If this
+ * field is valid, then the HWRM shall use the completion ring
+ * identified by this ID as the target completion ring for
+ * providing any asynchronous event completions for the function
+ * that is being configured.
+ */
+ uint8_t vlan_antispoof_mode;
+ /* VLAN Anti-spoofing mode. */
+ /* No VLAN anti-spoofing checks are enabled */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_NOCHECK UINT32_C(0x0)
+ /* Validate VLAN against the configured VLAN(s) */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_VALIDATE_VLAN \
+ UINT32_C(0x1)
+ /* Insert VLAN if it does not exist, otherwise discard */
+ #define HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_IF_VLANDNE \
+ UINT32_C(0x2)
/*
- * This value is used to configure the pause that will be used
- * for autonegotiation. Add text on the usage of auto_pause and
- * force_pause.
+ * Insert VLAN if it does not exist, override
+ * VLAN if it exists
*/
+ #define \
+ HWRM_FUNC_CFG_INPUT_VLAN_ANTISPOOF_MODE_INSERT_OR_OVERRIDE_VLAN \
+ UINT32_C(0x3)
+ uint8_t allowed_vlan_pris;
/*
- * When this bit is '1', Generation of tx pause messages has
- * been requested. Disabled otherwise.
+ * This bit field defines VLAN PRIs that are allowed on this
+ * function. If nth bit is set, then VLAN PRI n is allowed on
+ * this function.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX UINT32_C(0x1)
+ uint8_t evb_mode;
/*
- * When this bit is '1', Reception of rx pause messages has been
- * requested. Disabled otherwise.
+ * The HWRM shall allow a PF driver to change EVB mode for the
+ * partition it belongs to. The HWRM shall not allow a VF driver
+ * to change the EVB mode. The HWRM shall take into account the
+ * switching of EVB mode from one to another and reconfigure
+ * hardware resources as appropriately. The switching from VEB
+ * to VEPA mode requires the disabling of the loopback traffic.
+ * Additionally, source knock outs are handled differently in
+ * VEB and VEPA modes.
+ */
+ /* No Edge Virtual Bridging (EVB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_NO_EVB UINT32_C(0x0)
+ /* Virtual Ethernet Bridge (VEB) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEB UINT32_C(0x1)
+ /* Virtual Ethernet Port Aggregator (VEPA) */
+ #define HWRM_FUNC_CFG_INPUT_EVB_MODE_VEPA UINT32_C(0x2)
+ uint8_t unused_2;
+ uint16_t num_mcast_filters;
+ /*
+ * The number of multicast filters that should be reserved for
+ * this function on the RX side.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX UINT32_C(0x2)
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_cfg_output {
+ uint16_t error_code;
/*
- * When set to 1, the advertisement of pause is enabled. # When
- * the auto_mode is not set to none and this flag is set to 1,
- * then the auto_pause bits on this port are being advertised
- * and autoneg pause results are being interpreted. # When the
- * auto_mode is not set to none and this flag is set to 0, the
- * pause is forced as indicated in force_pause, and also
- * advertised as auto_pause bits, but the autoneg results are
- * not interpreted since the pause configuration is being
- * forced. # When the auto_mode is set to none and this flag is
- * set to 1, auto_pause bits should be ignored and should be set
- * to 0.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
- uint8_t unused_0;
- uint16_t auto_link_speed;
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * This is the speed that will be used if the autoneg_mode is
- * "one_speed" or "one_or_below". If an unsupported speed is
- * selected, an error will be generated.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- /* 100Mb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
- /* 1Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
- /* 20Mb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
- /* 10Mb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
- uint16_t auto_link_speed_mask;
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
/*
- * This is a mask of link speeds that will be used if
- * autoneg_mode is "mask". If unsupported speed is enabled an
- * error will be generated.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- /* 100Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB UINT32_C(0x10)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB UINT32_C(0x20)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
- /* 20Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB UINT32_C(0x100)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB UINT32_C(0x200)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB UINT32_C(0x400)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB UINT32_C(0x2000)
- uint8_t wirespeed;
- /* This value controls the wirespeed feature. */
- /* Wirespeed feature is disabled. */
- #define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_OFF UINT32_C(0x0)
- /* Wirespeed feature is enabled. */
- #define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_ON UINT32_C(0x1)
- uint8_t lpbk;
- /* This value controls the loopback setting for the PHY. */
- /* No loopback is selected. Normal operation. */
- #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
+} __attribute__((packed));
+
+/* hwrm_func_qstats */
+/*
+ * Description: This command returns statistics of a function. The input FID
+ * value is used to indicate what function is being queried. This allows a
+ * physical function driver to query virtual functions that are children of the
+ * physical function. The HWRM shall return any unsupported counter with a value
+ * of 0xFFFFFFFF for 32-bit counters and 0xFFFFFFFFFFFFFFFF for 64-bit counters.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_qstats_input {
+ uint16_t req_type;
/*
- * The HW will be configured with local loopback
- * such that host data is sent back to the host
- * without modification.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
+ uint16_t cmpl_ring;
/*
- * The HW will be configured with remote
- * loopback such that port logic will send
- * packets back out the transmitter that are
- * received.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
- uint8_t force_pause;
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * This value is used to configure the pause that will be used
- * for force mode.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
+ uint64_t resp_addr;
/*
- * When this bit is '1', Generation of tx pause messages is
- * supported. Disabled otherwise.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ uint16_t fid;
/*
- * When this bit is '1', Reception of rx pause messages is
- * supported. Disabled otherwise.
+ * Function ID of the function that is being queried. 0xFF...
+ * (All Fs) if the query is for the requesting function.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2)
- uint8_t unused_1;
- uint32_t preemphasis;
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (176 bytes) */
+struct hwrm_func_qstats_output {
+ uint16_t error_code;
/*
- * This value controls the pre-emphasis to be used for the link.
- * Driver should not set this value (use enable.preemphasis = 0)
- * unless driver is sure of setting. Normally HWRM FW will
- * determine proper pre-emphasis.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t eee_link_speed_mask;
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * Setting for link speed mask that is used to advertise speeds
- * during autonegotiation when EEE is enabled. This field is
- * valid only when EEE is enabled. The speeds specified in this
- * field shall be a subset of speeds specified in
- * auto_link_speed_mask. If EEE is enabled,then at least one
- * speed shall be provided in this mask.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- /* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
- /* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
- /* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
- /* Reserved */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets on the function. */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets on the function. */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets on the function. */
+ uint64_t tx_err_pkts;
+ /*
+ * Number of transmitted packets that were discarded due to
+ * internal NIC resource problems. For transmit, this can only
+ * happen if TMP is configured to allow dropping in HOL blocking
+ * conditions, which is not a normal configuration.
+ */
+ uint64_t tx_drop_pkts;
+ /*
+ * Number of dropped packets on transmit path on the function.
+ * These are packets that have been marked for drop by the TE
+ * CFA block or are packets that exceeded the transmit MTU limit
+ * for the function.
+ */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic on the function. */
+ uint64_t tx_mcast_bytes;
+ /*
+ * Number of transmitted bytes for multicast traffic on the
+ * function.
+ */
+ uint64_t tx_bcast_bytes;
+ /*
+ * Number of transmitted bytes for broadcast traffic on the
+ * function.
+ */
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets on the function. */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets on the function. */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets on the function. */
+ uint64_t rx_err_pkts;
+ /*
+ * Number of received packets that were discarded on the
+ * function due to resource limitations. This can happen for 3
+ * reasons. # The BD used for the packet has a bad format. #
+ * There were no BDs available in the ring for the packet. #
+ * There were no BDs available on-chip for the packet.
+ */
+ uint64_t rx_drop_pkts;
+ /*
+ * Number of dropped packets on received path on the function.
+ * These are packets that have been marked for drop by the RE
+ * CFA.
+ */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic on the function. */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic on the function. */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic on the function. */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets on the function. */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes on the function. */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events on the function. */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations on the function. */
+ uint32_t unused_0;
+ uint8_t unused_1;
uint8_t unused_2;
uint8_t unused_3;
- uint32_t tx_lpi_timer;
- uint32_t unused_4;
+ uint8_t valid;
/*
- * Reuested setting of TX LPI timer in microseconds. This field
- * is valid only when EEE is enabled and TX LPI is enabled.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
- #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_port_phy_cfg_output {
+/* hwrm_func_clr_stats */
+/*
+ * Description: This command clears statistics of a function. The input FID
+ * value is used to indicate what function's statistics is being cleared. This
+ * allows a physical function driver to clear statistics of virtual functions
+ * that are children of the physical function.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t fid;
+ /*
+ * Function ID of the function. 0xFF... (All Fs) if the query is
+ * for the requesting function.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_clr_stats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
*/
} __attribute__((packed));
-/* hwrm_port_phy_qcfg */
-/* Description: This command queries the PHY configuration for the port. */
-/* Input (24 bytes) */
-struct hwrm_port_phy_qcfg_input {
+/* hwrm_func_vf_vnic_ids_query */
+/* Description: This command is used to query vf vnic ids. */
+/* Input (32 bytes) */
+struct hwrm_func_vf_vnic_ids_query_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint16_t port_id;
- /* Port ID of port that is to be queried. */
- uint16_t unused_0[3];
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The
+ * scope of VF ID is local within a PF.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t max_vnic_id_cnt;
+ /* Max number of vnic ids in vnic id table */
+ uint64_t vnic_id_tbl_addr;
+ /* This is the address for VF VNIC ID table */
} __attribute__((packed));
-/* Output (96 bytes) */
-struct hwrm_port_phy_qcfg_output {
+/* Output (16 bytes) */
+struct hwrm_func_vf_vnic_ids_query_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint8_t link;
- /* This value indicates the current link status. */
- /* There is no link or cable detected. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0)
- /* There is no link, but a cable has been detected. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1)
- /* There is a link. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2)
- uint8_t unused_0;
- uint16_t link_speed;
- /* This value indicates the current link speed of the connection. */
- /* 100Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1)
- /* 1Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64)
- /* 20Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8)
- /* 10Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff)
- uint8_t duplex;
- /* This value is indicates the duplex of the current connection. */
- /* Half Duplex connection. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_HALF UINT32_C(0x0)
- /* Full duplex connection. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL UINT32_C(0x1)
- uint8_t pause;
+ uint32_t vnic_id_cnt;
/*
- * This value is used to indicate the current pause
- * configuration. When autoneg is enabled, this value represents
- * the autoneg results of pause configuration.
+ * Actual number of vnic ids Each VNIC ID is written as a 32-bit
+ * number.
*/
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
/*
- * When this bit is '1', Generation of tx pause messages is
- * supported. Disabled otherwise.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1)
+} __attribute__((packed));
+
+/* hwrm_func_drv_rgtr */
+/*
+ * Description: This command is used by the function driver to register its
+ * information with the HWRM. A function driver shall implement this command. A
+ * function driver shall use this command during the driver initialization right
+ * after the HWRM version discovery and default ring resources allocation.
+ */
+/* Input (80 bytes) */
+struct hwrm_func_drv_rgtr_input {
+ uint16_t req_type;
/*
- * When this bit is '1', Reception of rx pause messages is
- * supported. Disabled otherwise.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2)
- uint16_t support_speeds;
+ uint16_t cmpl_ring;
/*
- * The supported speeds for the port. This is a bit mask. For
- * each speed that is supported, the corrresponding bit will be
- * set to '1'.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- /* 100Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD \
- UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB UINT32_C(0x8)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB UINT32_C(0x10)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
- /* 20Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
- uint16_t force_link_speed;
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * Current setting of forced link speed. When the link speed is
- * not being forced, this value shall be set to 0.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- /* 100Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB \
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is requesting all
+ * requests from its children VF drivers to be forwarded to
+ * itself. This flag can only be set by the PF driver. If a VF
+ * driver sets this flag, it should be ignored by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_ALL_MODE UINT32_C(0x1)
+ /*
+ * When this bit is '1', the function is requesting none of the
+ * requests from its children VF drivers to be forwarded to
+ * itself. This flag can only be set by the PF driver. If a VF
+ * driver sets this flag, it should be ignored by the HWRM.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_FLAGS_FWD_NONE_MODE UINT32_C(0x2)
+ uint32_t enables;
+ /* This bit must be '1' for the os_type field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_OS_TYPE UINT32_C(0x1)
+ /* This bit must be '1' for the ver field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VER UINT32_C(0x2)
+ /* This bit must be '1' for the timestamp field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_TIMESTAMP UINT32_C(0x4)
+ /* This bit must be '1' for the vf_req_fwd field to be configured. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_VF_INPUT_FWD UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the async_event_fwd field to be
+ * configured.
+ */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_ENABLES_ASYNC_EVENT_FWD UINT32_C(0x10)
+ uint16_t os_type;
+ /*
+ * This value indicates the type of OS. The values are based on
+ * CIM_OperatingSystem.mof file as published by the DMTF.
+ */
+ /* Unknown */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Other OS not listed below. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_OTHER UINT32_C(0x1)
+ /* MSDOS OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_MSDOS UINT32_C(0xe)
+ /* Windows OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WINDOWS UINT32_C(0x12)
+ /* Solaris OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_SOLARIS UINT32_C(0x1d)
+ /* Linux OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_LINUX UINT32_C(0x24)
+ /* FreeBSD OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_FREEBSD UINT32_C(0x2a)
+ /* VMware ESXi OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_ESXI UINT32_C(0x68)
+ /* Microsoft Windows 8 64-bit OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN864 UINT32_C(0x73)
+ /* Microsoft Windows Server 2012 R2 OS. */
+ #define HWRM_FUNC_DRV_RGTR_INPUT_OS_TYPE_WIN2012R2 UINT32_C(0x74)
+ uint8_t ver_maj;
+ /* This is the major version of the driver. */
+ uint8_t ver_min;
+ /* This is the minor version of the driver. */
+ uint8_t ver_upd;
+ /* This is the update version of the driver. */
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint32_t timestamp;
+ /*
+ * This is a 32-bit timestamp provided by the driver for keep
+ * alive. The timestamp is in multiples of 1ms.
+ */
+ uint32_t unused_2;
+ uint32_t vf_req_fwd[8];
+ /*
+ * This is a 256-bit bit mask provided by the PF driver for
+ * letting the HWRM know what commands issued by the VF driver
+ * to the HWRM should be forwarded to the PF driver. Nth bit
+ * refers to the Nth req_type. Setting Nth bit to 1 indicates
+ * that requests from the VF driver with req_type equal to N
+ * shall be forwarded to the parent PF driver. This field is not
+ * valid for the VF driver.
+ */
+ uint32_t async_event_fwd[8];
+ /*
+ * This is a 256-bit bit mask provided by the function driver
+ * (PF or VF driver) to indicate the list of asynchronous event
+ * completions to be forwarded. Nth bit refers to the Nth
+ * event_id. Setting Nth bit to 1 by the function driver shall
+ * result in the HWRM forwarding asynchronous event completion
+ * with event_id equal to N. If all bits are set to 0 (value of
+ * 0), then the HWRM shall not forward any asynchronous event
+ * completion to this function driver.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_drv_rgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_drv_unrgtr */
+/*
+ * Description: This command is used by the function driver to un register with
+ * the HWRM. A function driver shall implement this command. A function driver
+ * shall use this command during the driver unloading.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_drv_unrgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the function driver is notifying the
+ * HWRM to prepare for the shutdown.
+ */
+ #define HWRM_FUNC_DRV_UNRGTR_INPUT_FLAGS_PREPARE_FOR_SHUTDOWN \
UINT32_C(0x1)
- /* 1Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB \
- UINT32_C(0x19)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
- /* 20Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB \
- UINT32_C(0x3e8)
- /* 10Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
- uint8_t auto_mode;
- /* Current setting of auto negotiation mode. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_drv_unrgtr_output {
+ uint16_t error_code;
/*
- * Disable autoneg or autoneg disabled. No
- * speeds are selected.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0)
- /* Select all possible speeds for autoneg mode. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * Select only the auto_link_speed speed for
- * autoneg mode. This mode has been DEPRECATED.
- * An HWRM client should not use this mode.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_buf_rgtr */
+/*
+ * Description: This command is used by the PF driver to register buffers used
+ * in the PF-VF communication with the HWRM. The PF driver uses this command to
+ * register buffers for each PF-VF channel. A parent PF may issue this command
+ * per child VF. If VF ID is not valid, then this command is used to register
+ * buffers for all children VFs of the PF.
+ */
+/* Input (128 bytes) */
+struct hwrm_func_buf_rgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id field to be configured. */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
+ /* This bit must be '1' for the err_buf_addr field to be configured. */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_ENABLES_ERR_BUF_ADDR UINT32_C(0x2)
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The
+ * scope of VF ID is local within a PF.
+ */
+ uint16_t req_buf_num_pages;
+ /*
+ * This field represents the number of pages used for request
+ * buffer(s).
+ */
+ uint16_t req_buf_page_size;
+ /* This field represents the page size used for request buffer(s). */
+ /* 16 bytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_16B UINT32_C(0x4)
+ /* 4 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4K UINT32_C(0xc)
+ /* 8 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_8K UINT32_C(0xd)
+ /* 64 Kbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_64K UINT32_C(0x10)
+ /* 2 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_2M UINT32_C(0x15)
+ /* 4 Mbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_4M UINT32_C(0x16)
+ /* 1 Gbytes */
+ #define HWRM_FUNC_BUF_RGTR_INPUT_INPUT_BUF_PAGE_SIZE_1G UINT32_C(0x1e)
+ uint16_t req_buf_len;
+ /* The length of the request buffer per VF in bytes. */
+ uint16_t resp_buf_len;
+ /* The length of the response buffer in bytes. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint64_t req_buf_page_addr[10];
+ /* This field represents the page address of req buffer. */
+ uint64_t error_buf_addr;
+ /*
+ * This field is used to receive the error reporting from the
+ * chipset. Only applicable for PFs.
+ */
+ uint64_t resp_buf_addr;
+ /* This field is used to receive the response forwarded by the HWRM. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_buf_rgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_buf_unrgtr */
+/*
+ * Description: This command is used by the PF driver to unregister buffers used
+ * in the PF-VF communication with the HWRM. The PF driver uses this command to
+ * unregister buffers for PF-VF communication. A parent PF may issue this
+ * command to unregister buffers for communication between the PF and a specific
+ * VF. If the VF ID is not valid, then this command is used to unregister
+ * buffers used for communications with all children VFs of the PF.
+ */
+/* Input (24 bytes) */
+struct hwrm_func_buf_unrgtr_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id field to be configured. */
+ #define HWRM_FUNC_BUF_UNRGTR_INPUT_ENABLES_VF_ID UINT32_C(0x1)
+ uint16_t vf_id;
+ /*
+ * This value is used to identify a Virtual Function (VF). The
+ * scope of VF ID is local within a PF.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_func_buf_unrgtr_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_func_vf_cfg */
+/*
+ * Description: This command allows configuration of a VF by its driver. If this
+ * function is called by a PF driver, then the HWRM shall fail this command. If
+ * guest VLAN and/or MAC address are provided in this command, then the HWRM
+ * shall set up appropriate MAC/VLAN filters for the VF that is being
+ * configured. A VF driver should set VF MTU/MRU using this command prior to
+ * allocating RX VNICs or TX rings for the corresponding VF.
+ */
+/* Input (32 bytes) */
+
+struct hwrm_func_vf_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the mtu field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_MTU UINT32_C(0x1)
+ /* This bit must be '1' for the guest_vlan field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_GUEST_VLAN UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the async_event_cr field to be configured.
+ */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_ASYNC_EVENT_CR UINT32_C(0x4)
+ /* This bit must be '1' for the dflt_mac_addr field to be configured. */
+ #define HWRM_FUNC_VF_CFG_INPUT_ENABLES_DFLT_MAC_ADDR UINT32_C(0x8)
+ uint16_t mtu;
+ /*
+ * The maximum transmission unit requested on the function. The HWRM
+ * should make sure that the mtu of the function does not exceed the mtu
+ * of the physical port that this function is associated with. In
+ * addition to requesting mtu per function, it is possible to configure
+ * mtu per transmit ring. By default, the mtu of each transmit ring
+ * associated with a function is equal to the mtu of the function. The
+ * HWRM should make sure that the mtu of each transmit ring that is
+ * assigned to a function has a valid mtu.
+ */
+ uint16_t guest_vlan;
+ /*
+ * The guest VLAN for the function being configured. This field's format
+ * is same as 802.1Q Tag's Tag Control Information (TCI) format that
+ * includes both Priority Code Point (PCP) and VLAN Identifier (VID).
+ */
+ uint16_t async_event_cr;
+ /*
+ * ID of the target completion ring for receiving asynchronous event
+ * completions. If this field is not valid, then the HWRM shall use the
+ * default completion ring of the function that is being configured as
+ * the target completion ring for providing any asynchronous event
+ * completions for that function. If this field is valid, then the HWRM
+ * shall use the completion ring identified by this ID as the target
+ * completion ring for providing any asynchronous event completions for
+ * the function that is being configured.
+ */
+ uint8_t dflt_mac_addr[6];
+ /*
+ * This value is the current MAC address requested by the VF driver to
+ * be configured on this VF. A value of 00-00-00-00-00-00 indicates no
+ * MAC address configuration is requested by the VF driver. The parent
+ * PF driver may reject or overwrite this MAC address.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_func_vf_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_phy_cfg */
+/*
+ * Description: This command configures the PHY device for the port. It allows
+ * setting of the most generic settings for the PHY. The HWRM shall complete
+ * this command as soon as PHY settings are configured. They may not be applied
+ * when the command response is provided. A VF driver shall not be allowed to
+ * configure PHY using this command. In a network partition mode, a PF driver
+ * shall not be allowed to configure PHY using this command.
+ */
+/* Input (56 bytes) */
+struct hwrm_port_phy_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is set to '1', the PHY for the port shall be
+ * reset. # If this bit is set to 1, then the HWRM shall reset
+ * the PHY after applying PHY configuration changes specified in
+ * this command. # In order to guarantee that PHY configuration
+ * changes specified in this command take effect, the HWRM
+ * client should set this flag to 1. # If this bit is not set to
+ * 1, then the HWRM may reset the PHY depending on the current
+ * PHY configuration and settings specified in this command.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESET_PHY UINT32_C(0x1)
+ /* deprecated bit. Do not use!!! */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_DEPRECATED UINT32_C(0x2)
+ /*
+ * When this bit is set to '1', the link shall be forced to the
+ * force_link_speed value. When this bit is set to '1', the HWRM
+ * client should not enable any of the auto negotiation related
+ * fields represented by auto_XXX fields in this command. When
+ * this bit is set to '1' and the HWRM client has enabled a
+ * auto_XXX field in this command, then the HWRM shall ignore
+ * the enabled auto_XXX field. When this bit is set to zero, the
+ * link shall be allowed to autoneg.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE UINT32_C(0x4)
+ /*
+ * When this bit is set to '1', the auto-negotiation process
+ * shall be restarted on the link.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_RESTART_AUTONEG UINT32_C(0x8)
+ /*
+ * When this bit is set to '1', Energy Efficient Ethernet (EEE)
+ * is requested to be enabled on this link. If EEE is not
+ * supported on this port, then this flag shall be ignored by
+ * the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_ENABLE UINT32_C(0x10)
+ /*
+ * When this bit is set to '1', Energy Efficient Ethernet (EEE)
+ * is requested to be disabled on this link. If EEE is not
+ * supported on this port, then this flag shall be ignored by
+ * the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_DISABLE UINT32_C(0x20)
+ /*
+ * When this bit is set to '1' and EEE is enabled on this link,
+ * then TX LPI is requested to be enabled on the link. If EEE is
+ * not supported on this port, then this flag shall be ignored
+ * by the HWRM. If EEE is disabled on this port, then this flag
+ * shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_ENABLE UINT32_C(0x40)
+ /*
+ * When this bit is set to '1' and EEE is enabled on this link,
+ * then TX LPI is requested to be disabled on the link. If EEE
+ * is not supported on this port, then this flag shall be
+ * ignored by the HWRM. If EEE is disabled on this port, then
+ * this flag shall be ignored by the HWRM.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_EEE_TX_LPI_DISABLE UINT32_C(0x80)
+ /*
+ * When set to 1, then the HWRM shall enable FEC
+ * autonegotitation on this port if supported. When set to 0,
+ * then this flag shall be ignored. If FEC autonegotiation is
+ * not supported, then the HWRM shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_ENABLE UINT32_C(0x100)
+ /*
+ * When set to 1, then the HWRM shall disable FEC
+ * autonegotiation on this port if supported. When set to 0,
+ * then this flag shall be ignored. If FEC autonegotiation is
+ * not supported, then the HWRM shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_AUTONEG_DISABLE \
+ UINT32_C(0x200)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 74 (Fire
+ * Code) on this port if supported. When set to 0, then this
+ * flag shall be ignored. If FEC CLAUSE 74 is not supported,
+ * then the HWRM shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_ENABLE \
+ UINT32_C(0x400)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 74
+ * (Fire Code) on this port if supported. When set to 0, then
+ * this flag shall be ignored. If FEC CLAUSE 74 is not
+ * supported, then the HWRM shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \
+ UINT32_C(0x800)
+ /*
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed
+ * Solomon) on this port if supported. When set to 0, then this
+ * flag shall be ignored. If FEC CLAUSE 91 is not supported,
+ * then the HWRM shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \
+ UINT32_C(0x1000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 91
+ * (Reed Solomon) on this port if supported. When set to 0, then
+ * this flag shall be ignored. If FEC CLAUSE 91 is not
+ * supported, then the HWRM shall ignore this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \
+ UINT32_C(0x2000)
+ /*
+ * When this bit is set to '1', the link shall be forced to be
+ * taken down. # When this bit is set to '1", all other command
+ * input settings related to the link speed shall be ignored.
+ * Once the link state is forced down, it can be explicitly
+ * cleared from that state by setting this flag to '0'. # If
+ * this flag is set to '0', then the link shall be cleared from
+ * forced down state if the link is in forced down state. There
+ * may be conditions (e.g. out-of-band or sideband configuration
+ * changes for the link) outside the scope of the HWRM
+ * implementation that may clear forced down link state.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FORCE_LINK_DWN UINT32_C(0x4000)
+ uint32_t enables;
+ /* This bit must be '1' for the auto_mode field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_MODE UINT32_C(0x1)
+ /* This bit must be '1' for the auto_duplex field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_DUPLEX UINT32_C(0x2)
+ /* This bit must be '1' for the auto_pause field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_PAUSE UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the auto_link_speed field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the auto_link_speed_mask field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_AUTO_LINK_SPEED_MASK \
+ UINT32_C(0x10)
+ /* This bit must be '1' for the wirespeed field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_WIOUTPUTEED UINT32_C(0x20)
+ /* This bit must be '1' for the lpbk field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_LPBK UINT32_C(0x40)
+ /* This bit must be '1' for the preemphasis field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_PREEMPHASIS UINT32_C(0x80)
+ /* This bit must be '1' for the force_pause field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_FORCE_PAUSE UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the eee_link_speed_mask field to be
+ * configured.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_EEE_LINK_SPEED_MASK \
+ UINT32_C(0x200)
+ /* This bit must be '1' for the tx_lpi_timer field to be configured. */
+ #define HWRM_PORT_PHY_CFG_INPUT_ENABLES_TX_LPI_TIMER UINT32_C(0x400)
+ uint16_t port_id;
+ /* Port ID of port that is to be configured. */
+ uint16_t force_link_speed;
+ /*
+ * This is the speed that will be used if the force bit is '1'.
+ * If unsupported speed is selected, an error will be generated.
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint8_t auto_mode;
+ /*
+ * This value is used to identify what autoneg mode is used when
+ * the link speed is not being forced.
+ */
+ /*
+ * Disable autoneg or autoneg disabled. No
+ * speeds are selected.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_NONE UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for
+ * autoneg mode. This mode has been DEPRECATED.
+ * An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below
+ * that speed for autoneg. This mode has been
+ * DEPRECATED. An HWRM client should not use
+ * this mode.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding
+ * link speed mask value that is provided.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
+ uint8_t auto_duplex;
+ /*
+ * This is the duplex setting that will be used if the
+ * autoneg_mode is "one_speed" or "one_or_below".
+ */
+ /* Half Duplex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_HALF UINT32_C(0x0)
+ /* Full duplex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_FULL UINT32_C(0x1)
+ /* Both Half and Full dupex will be requested. */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_DUPLEX_BOTH UINT32_C(0x2)
+ uint8_t auto_pause;
+ /*
+ * This value is used to configure the pause that will be used
+ * for autonegotiation. Add text on the usage of auto_pause and
+ * force_pause.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages has
+ * been requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages has been
+ * requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_RX UINT32_C(0x2)
+ /*
+ * When set to 1, the advertisement of pause is enabled. # When
+ * the auto_mode is not set to none and this flag is set to 1,
+ * then the auto_pause bits on this port are being advertised
+ * and autoneg pause results are being interpreted. # When the
+ * auto_mode is not set to none and this flag is set to 0, the
+ * pause is forced as indicated in force_pause, and also
+ * advertised as auto_pause bits, but the autoneg results are
+ * not interpreted since the pause configuration is being
+ * forced. # When the auto_mode is set to none and this flag is
+ * set to 1, auto_pause bits should be ignored and should be set
+ * to 0.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
+ uint8_t unused_0;
+ uint16_t auto_link_speed;
+ /*
+ * This is the speed that will be used if the autoneg_mode is
+ * "one_speed" or "one_or_below". If an unsupported speed is
+ * selected, an error will be generated.
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint16_t auto_link_speed_mask;
+ /*
+ * This is a mask of link speeds that will be used if
+ * autoneg_mode is "mask". If unsupported speed is enabled an
+ * error will be generated.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2GB \
+ UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_AUTO_LINK_SPEED_MASK_10MB \
+ UINT32_C(0x2000)
+ uint8_t wirespeed;
+ /* This value controls the wirespeed feature. */
+ /* Wirespeed feature is disabled. */
+ #define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_OFF UINT32_C(0x0)
+ /* Wirespeed feature is enabled. */
+ #define HWRM_PORT_PHY_CFG_INPUT_WIOUTPUTEED_ON UINT32_C(0x1)
+ uint8_t lpbk;
+ /* This value controls the loopback setting for the PHY. */
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback
+ * such that host data is sent back to the host
+ * without modification.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote
+ * loopback such that port logic will send
+ * packets back out the transmitter that are
+ * received.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_LPBK_REMOTE UINT32_C(0x2)
+ uint8_t force_pause;
+ /*
+ * This value is used to configure the pause that will be used
+ * for force mode.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FORCE_PAUSE_RX UINT32_C(0x2)
+ uint8_t unused_1;
+ uint32_t preemphasis;
+ /*
+ * This value controls the pre-emphasis to be used for the link.
+ * Driver should not set this value (use enable.preemphasis = 0)
+ * unless driver is sure of setting. Normally HWRM FW will
+ * determine proper pre-emphasis.
+ */
+ uint16_t eee_link_speed_mask;
+ /*
+ * Setting for link speed mask that is used to advertise speeds
+ * during autonegotiation when EEE is enabled. This field is
+ * valid only when EEE is enabled. The speeds specified in this
+ * field shall be a subset of speeds specified in
+ * auto_link_speed_mask. If EEE is enabled,then at least one
+ * speed shall be provided in this mask.
+ */
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD1 UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_100MB UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD2 UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD3 UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_RSVD4 UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_CFG_INPUT_EEE_LINK_SPEED_MASK_10GB UINT32_C(0x40)
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint32_t tx_lpi_timer;
+ uint32_t unused_4;
+ /*
+ * Reuested setting of TX LPI timer in microseconds. This field
+ * is valid only when EEE is enabled and TX LPI is enabled.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_CFG_INPUT_TX_LPI_TIMER_SFT 0
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_phy_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_phy_qcfg */
+/* Description: This command queries the PHY configuration for the port. */
+/* Input (24 bytes) */
+struct hwrm_port_phy_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is to be queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (96 bytes) */
+struct hwrm_port_phy_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t link;
+ /* This value indicates the current link status. */
+ /* There is no link or cable detected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_NO_LINK UINT32_C(0x0)
+ /* There is no link, but a cable has been detected. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL UINT32_C(0x1)
+ /* There is a link. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2)
+ uint8_t unused_0;
+ uint16_t link_speed;
+ /* This value indicates the current link speed of the connection. */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint8_t duplex;
+ /* This value is indicates the duplex of the current connection. */
+ /* Half Duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_HALF UINT32_C(0x0)
+ /* Full duplex connection. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_DUPLEX_FULL UINT32_C(0x1)
+ uint8_t pause;
+ /*
+ * This value is used to indicate the current pause
+ * configuration. When autoneg is enabled, this value represents
+ * the autoneg results of pause configuration.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PAUSE_RX UINT32_C(0x2)
+ uint16_t support_speeds;
+ /*
+ * The supported speeds for the port. This is a bit mask. For
+ * each speed that is supported, the corrresponding bit will be
+ * set to '1'.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MBHD UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100MB UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GBHD UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2GB UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_2_5GB UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10GB UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_20GB UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_25GB UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_40GB UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_50GB UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_100GB UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MBHD UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SUPPORT_SPEEDS_10MB UINT32_C(0x2000)
+ uint16_t force_link_speed;
+ /*
+ * Current setting of forced link speed. When the link speed is
+ * not being forced, this value shall be set to 0.
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint8_t auto_mode;
+ /* Current setting of auto negotiation mode. */
+ /*
+ * Disable autoneg or autoneg disabled. No
+ * speeds are selected.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_NONE UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ALL_SPEEDS UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for
+ * autoneg mode. This mode has been DEPRECATED.
+ * An HWRM client should not use this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below
+ * that speed for autoneg. This mode has been
+ * DEPRECATED. An HWRM client should not use
+ * this mode.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding
+ * link speed mask value that is provided.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
+ uint8_t auto_pause;
+ /*
+ * Current setting of pause autonegotiation. Move autoneg_pause
+ * flag here.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages has
+ * been requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages has been
+ * requested. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX UINT32_C(0x2)
+ /*
+ * When set to 1, the advertisement of pause is enabled. # When
+ * the auto_mode is not set to none and this flag is set to 1,
+ * then the auto_pause bits on this port are being advertised
+ * and autoneg pause results are being interpreted. # When the
+ * auto_mode is not set to none and this flag is set to 0, the
+ * pause is forced as indicated in force_pause, and also
+ * advertised as auto_pause bits, but the autoneg results are
+ * not interpreted since the pause configuration is being
+ * forced. # When the auto_mode is set to none and this flag is
+ * set to 1, auto_pause bits should be ignored and should be set
+ * to 0.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE UINT32_C(0x4)
+ uint16_t auto_link_speed;
+ /*
+ * Current setting for auto_link_speed. This field is only valid
+ * when auto_mode is set to "one_speed" or "one_or_below".
+ */
+ /* 100Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
+ /* 1Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
+ /* 20Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
+ /* 10Mb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
+ uint16_t auto_link_speed_mask;
+ /*
+ * Current setting for auto_link_speed_mask that is used to
+ * advertise speeds during autonegotiation. This field is only
+ * valid when auto_mode is set to "mask". The speeds specified
+ * in this field shall be a subset of supported speeds on this
+ * port.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \
+ UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \
+ UINT32_C(0x2000)
+ uint8_t wirespeed;
+ /* Current setting for wirespeed. */
+ /* Wirespeed feature is disabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_OFF UINT32_C(0x0)
+ /* Wirespeed feature is enabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_ON UINT32_C(0x1)
+ uint8_t lpbk;
+ /* Current setting for loopback. */
+ /* No loopback is selected. Normal operation. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ /*
+ * The HW will be configured with local loopback
+ * such that host data is sent back to the host
+ * without modification.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ /*
+ * The HW will be configured with remote
+ * loopback such that port logic will send
+ * packets back out the transmitter that are
+ * received.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
+ uint8_t force_pause;
+ /*
+ * Current setting of forced pause. When the pause configuration
+ * is not being forced, then this value shall be set to 0.
+ */
+ /*
+ * When this bit is '1', Generation of tx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2)
+ uint8_t module_status;
+ /*
+ * This value indicates the current status of the optics module
+ * on this port.
+ */
+ /* Module is inserted and accepted */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE UINT32_C(0x0)
+ /* Module is rejected and transmit side Laser is disabled. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX UINT32_C(0x1)
+ /* Module mismatch warning. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG UINT32_C(0x2)
+ /* Module is rejected and powered down. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN UINT32_C(0x3)
+ /* Module is not inserted. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
+ UINT32_C(0x4)
+ /* Module status is not applicable. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
+ UINT32_C(0xff)
+ uint32_t preemphasis;
+ /* Current setting for preemphasis. */
+ uint8_t phy_maj;
+ /* This field represents the major version of the PHY. */
+ uint8_t phy_min;
+ /* This field represents the minor version of the PHY. */
+ uint8_t phy_bld;
+ /* This field represents the build version of the PHY. */
+ uint8_t phy_type;
+ /* This value represents a PHY type. */
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN UINT32_C(0x0)
+ /* BASE-CR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR UINT32_C(0x1)
+ /* BASE-KR4 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 UINT32_C(0x2)
+ /* BASE-LR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR UINT32_C(0x3)
+ /* BASE-SR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR UINT32_C(0x4)
+ /* BASE-KR2 (Deprecated) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 UINT32_C(0x5)
+ /* BASE-KX */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX UINT32_C(0x6)
+ /* BASE-KR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR UINT32_C(0x7)
+ /* BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET UINT32_C(0x8)
+ /* EEE capable BASE-T */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE UINT32_C(0x9)
+ /* SGMII connected external PHY */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY UINT32_C(0xa)
+ /* 25G_BASECR_CA_L */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_L UINT32_C(0xb)
+ /* 25G_BASECR_CA_S */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_S UINT32_C(0xc)
+ /* 25G_BASECR_CA_N */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASECR_CA_N UINT32_C(0xd)
+ /* 25G_BASESR */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_25G_BASESR UINT32_C(0xe)
+ /* 100G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASECR4 UINT32_C(0xf)
+ /* 100G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR4 UINT32_C(0x10)
+ /* 100G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASELR4 UINT32_C(0x11)
+ /* 100G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASEER4 UINT32_C(0x12)
+ /* 100G_BASESR10 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_100G_BASESR10 UINT32_C(0x13)
+ /* 40G_BASECR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASECR4 UINT32_C(0x14)
+ /* 40G_BASESR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASESR4 UINT32_C(0x15)
+ /* 40G_BASELR4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASELR4 UINT32_C(0x16)
+ /* 40G_BASEER4 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_BASEER4 UINT32_C(0x17)
+ /* 40G_ACTIVE_CABLE */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_40G_ACTIVE_CABLE \
+ UINT32_C(0x18)
+ uint8_t media_type;
+ /* This value represents a media type. */
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0)
+ /* Twisted Pair */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1)
+ /* Direct Attached Copper */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2)
+ /* Fiber */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3)
+ uint8_t xcvr_pkg_type;
+ /* This value represents a transceiver type. */
+ /* PHY and MAC are in the same package */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
+ UINT32_C(0x1)
+ /* PHY and MAC are in different packages */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
+ UINT32_C(0x2)
+ uint8_t eee_config_phy_addr;
+ /*
+ * This field represents flags related to EEE configuration.
+ * These EEE configuration flags are valid only when the
+ * auto_mode is not set to none (in other words autonegotiation
+ * is enabled).
+ */
+ /* This field represents PHY address. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK UINT32_C(0x1f)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0
+ /*
+ * When set to 1, Energy Efficient Ethernet (EEE) mode is
+ * enabled. Speeds for autoneg with EEE mode enabled are based
+ * on eee_link_speed_mask.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED UINT32_C(0x20)
+ /*
+ * This flag is valid only when eee_enabled is set to 1. # If
+ * eee_enabled is set to 0, then EEE mode is disabled and this
+ * flag shall be ignored. # If eee_enabled is set to 1 and this
+ * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
+ * is enabled and in use. # If eee_enabled is set to 1 and this
+ * flag is set to 0, then Energy Efficient Ethernet (EEE) mode
+ * is enabled but is currently not in use.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE UINT32_C(0x40)
+ /*
+ * This flag is valid only when eee_enabled is set to 1. # If
+ * eee_enabled is set to 0, then EEE mode is disabled and this
+ * flag shall be ignored. # If eee_enabled is set to 1 and this
+ * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
+ * is enabled and TX LPI is enabled. # If eee_enabled is set to
+ * 1 and this flag is set to 0, then Energy Efficient Ethernet
+ * (EEE) mode is enabled but TX LPI is disabled.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI UINT32_C(0x80)
+ /*
+ * This field represents flags related to EEE configuration.
+ * These EEE configuration flags are valid only when the
+ * auto_mode is not set to none (in other words autonegotiation
+ * is enabled).
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK UINT32_C(0xe0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5
+ uint8_t parallel_detect;
+ /* Reserved field, set to 0 */
+ /*
+ * When set to 1, the parallel detection is used to determine
+ * the speed of the link partner. Parallel detection is used
+ * when a autonegotiation capable device is connected to a link
+ * parter that is not capable of autonegotiation.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1)
+ /* Reserved field, set to 0 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK UINT32_C(0xfe)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT 1
+ uint16_t link_partner_adv_speeds;
+ /*
+ * The advertised speeds for the port by the link partner. Each
+ * advertised speed will be set to '1'.
+ */
+ /* 100Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \
+ UINT32_C(0x2)
+ /* 1Gb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \
+ UINT32_C(0x8)
+ /* 2Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \
+ UINT32_C(0x10)
+ /* 2.5Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \
+ UINT32_C(0x40)
+ /* 20Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \
+ UINT32_C(0x80)
+ /* 25Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \
+ UINT32_C(0x100)
+ /* 40Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \
+ UINT32_C(0x200)
+ /* 50Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \
+ UINT32_C(0x400)
+ /* 100Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \
+ UINT32_C(0x800)
+ /* 10Mb link speed (Half-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \
+ UINT32_C(0x1000)
+ /* 10Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \
+ UINT32_C(0x2000)
+ uint8_t link_partner_adv_auto_mode;
+ /*
+ * The advertised autoneg for the port by the link partner. This
+ * field is deprecated and should be set to 0.
+ */
+ /*
+ * Disable autoneg or autoneg disabled. No
+ * speeds are selected.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
+ UINT32_C(0x0)
+ /* Select all possible speeds for autoneg mode. */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
+ UINT32_C(0x1)
+ /*
+ * Select only the auto_link_speed speed for
+ * autoneg mode. This mode has been DEPRECATED.
+ * An HWRM client should not use this mode.
+ */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
+ UINT32_C(0x2)
+ /*
+ * Select the auto_link_speed or any speed below
+ * that speed for autoneg. This mode has been
+ * DEPRECATED. An HWRM client should not use
+ * this mode.
+ */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
+ UINT32_C(0x3)
+ /*
+ * Select the speeds based on the corresponding
+ * link speed mask value that is provided.
+ */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
+ UINT32_C(0x4)
+ uint8_t link_partner_adv_pause;
+ /* The advertised pause settings on the port by the link partner. */
+ /*
+ * When this bit is '1', Generation of tx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', Reception of rx pause messages is
+ * supported. Disabled otherwise.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \
+ UINT32_C(0x2)
+ uint16_t adv_eee_link_speed_mask;
+ /*
+ * Current setting for link speed mask that is used to advertise
+ * speeds during autonegotiation when EEE is enabled. This field
+ * is valid only when eee_enabled flags is set to 1. The speeds
+ * specified in this field shall be a subset of speeds specified
+ * in auto_link_speed_mask.
+ */
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ uint16_t link_partner_adv_eee_link_speed_mask;
+ /*
+ * Current setting for link speed mask that is advertised by the
+ * link partner when EEE is enabled. This field is valid only
+ * when eee_enabled flags is set to 1.
+ */
+ /* Reserved */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
+ UINT32_C(0x1)
+ /* 100Mb link speed (Full-duplex) */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
+ UINT32_C(0x2)
+ /* Reserved */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ UINT32_C(0x4)
+ /* 1Gb link speed (Full-duplex) */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
+ UINT32_C(0x8)
+ /* Reserved */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
+ UINT32_C(0x10)
+ /* Reserved */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
+ UINT32_C(0x20)
+ /* 10Gb link speed */
+ #define \
+ HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
+ UINT32_C(0x40)
+ uint32_t xcvr_identifier_type_tx_lpi_timer;
+ /* This value represents transceiver identifier type. */
+ /*
+ * Current setting of TX LPI timer in microseconds. This field
+ * is valid only when_eee_enabled flag is set to 1 and
+ * tx_lpi_enabled is set to 1.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK UINT32_C(0xffffff)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
+ /* This value represents transceiver identifier type. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
+ UINT32_C(0xff000000)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
+ /* Unknown */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
+ (UINT32_C(0x0) << 24)
+ /* SFP/SFP+/SFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
+ (UINT32_C(0x3) << 24)
+ /* QSFP */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
+ (UINT32_C(0xc) << 24)
+ /* QSFP+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
+ (UINT32_C(0xd) << 24)
+ /* QSFP28 */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
+ (UINT32_C(0x11) << 24)
+ uint16_t fec_cfg;
+ /*
+ * This value represents the current configuration of Forward
+ * Error Correction (FEC) on the port.
+ */
+ /*
+ * When set to 1, then FEC is not supported on this port. If
+ * this flag is set to 1, then all other FEC configuration flags
+ * shall be ignored. When set to 0, then FEC is supported as
+ * indicated by other configuration flags. If no cable is
+ * attached and the HWRM does not yet know the FEC capability,
+ * then the HWRM shall set this flag to 1 when reporting FEC
+ * capability.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, then FEC autonegotiation is supported on this
+ * port. When set to 0, then FEC autonegotiation is not
+ * supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, then FEC autonegotiation is enabled on this
+ * port. When set to 0, then FEC autonegotiation is disabled if
+ * supported. This flag should be ignored if FEC autonegotiation
+ * is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on
+ * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
+ * not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on
+ * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
+ * disabled if supported. This flag should be ignored if FEC
+ * CLAUSE 74 is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
+ UINT32_C(0x10)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported
+ * on this port. When set to 0, then FEC CLAUSE 91 (Reed
+ * Solomon) is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled
+ * on this port. When set to 0, then FEC CLAUSE 91 (Reed
+ * Solomon) is disabled if supported. This flag should be
+ * ignored if FEC CLAUSE 91 is not supported on this port.
+ */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
+ UINT32_C(0x40)
+ uint8_t unused_1;
+ uint8_t unused_2;
+ char phy_vendor_name[16];
+ /*
+ * Up to 16 bytes of null padded ASCII string representing PHY
+ * vendor. If the string is set to null, then the vendor name is
+ * not available.
+ */
+ char phy_vendor_partnumber[16];
+ /*
+ * Up to 16 bytes of null padded ASCII string that identifies
+ * vendor specific part number of the PHY. If the string is set
+ * to null, then the vendor specific part number is not
+ * available.
+ */
+ uint32_t unused_3;
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t unused_6;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_qstats */
+/* Description: This function returns per port Ethernet statistics. */
+/* Input (40 bytes) */
+struct hwrm_port_qstats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2[3];
+ uint8_t unused_3;
+ uint64_t tx_stat_host_addr;
+ /* This is the host address where Tx port statistics will be stored */
+ uint64_t rx_stat_host_addr;
+ /* This is the host address where Rx port statistics will be stored */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_qstats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint16_t tx_stat_size;
+ /* The size of TX port statistics block in bytes. */
+ uint16_t rx_stat_size;
+ /* The size of RX port statistics block in bytes. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_clr_stats */
+/*
+ * Description: This function clears per port statistics. The HWRM shall not
+ * allow a VF driver to clear port statistics. The HWRM shall not allow a PF
+ * driver to clear port statistics in a partitioning mode. The HWRM may allow a
+ * PF driver to clear port statistics in the non-partitioning mode.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_clr_stats_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port that is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_clr_stats_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_led_cfg */
+/*
+ * Description: This function is used to configure LEDs on a given port. Each
+ * port has individual set of LEDs associated with it. These LEDs are used for
+ * speed/link configuration as well as activity indicator configuration. Up to
+ * three LEDs can be configured, one for activity and two for speeds.
+ */
+/* Input (64 bytes) */
+struct hwrm_port_led_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the led0_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID UINT32_C(0x1)
+ /* This bit must be '1' for the led0_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE UINT32_C(0x2)
+ /* This bit must be '1' for the led0_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the led0_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the led0_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the led0_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID UINT32_C(0x20)
+ /* This bit must be '1' for the led1_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID UINT32_C(0x40)
+ /* This bit must be '1' for the led1_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE UINT32_C(0x80)
+ /* This bit must be '1' for the led1_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the led1_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the led1_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the led1_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID UINT32_C(0x800)
+ /* This bit must be '1' for the led2_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID UINT32_C(0x1000)
+ /* This bit must be '1' for the led2_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE UINT32_C(0x2000)
+ /* This bit must be '1' for the led2_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR UINT32_C(0x4000)
+ /*
+ * This bit must be '1' for the led2_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the led2_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF UINT32_C(0x10000)
+ /*
+ * This bit must be '1' for the led2_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID UINT32_C(0x20000)
+ /* This bit must be '1' for the led3_id field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID UINT32_C(0x40000)
+ /* This bit must be '1' for the led3_state field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE UINT32_C(0x80000)
+ /* This bit must be '1' for the led3_color field to be configured. */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR UINT32_C(0x100000)
+ /*
+ * This bit must be '1' for the led3_blink_on field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON UINT32_C(0x200000)
+ /*
+ * This bit must be '1' for the led3_blink_off field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \
+ UINT32_C(0x400000)
+ /*
+ * This bit must be '1' for the led3_group_id field to be
+ * configured.
+ */
+ #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID UINT32_C(0x800000)
+ uint16_t port_id;
+ /* Port ID of port whose LEDs are configured. */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are being configured. Up to 4 LEDs
+ * can be configured with this command.
+ */
+ uint8_t rsvd;
+ /* Reserved field. */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_state;
+ /* The requested state of the LED #0. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led0_color;
+ /* The requested color of LED #0. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #0 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd0;
+ /* Reserved field. */
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_state;
+ /* The requested state of the LED #1. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led1_color;
+ /* The requested color of LED #1. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_1;
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #1 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #1 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd1;
+ /* Reserved field. */
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_state;
+ /* The requested state of the LED #2. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led2_color;
+ /* The requested color of LED #2. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_2;
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs to.
+ * If set to 0, then the LED #2 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #2 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd2;
+ /* Reserved field. */
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_state;
+ /* The requested state of the LED #3. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led3_color;
+ /* The requested color of LED #3. */
+ /* Default */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_3;
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #3 shall not be grouped and shall
+ * be treated as an individual resource. For all other non-zero
+ * values of this field, LED #3 shall be grouped together with
+ * the LEDs with the same group ID value.
+ */
+ uint8_t rsvd3;
+ /* Reserved field. */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_port_led_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_led_qcfg */
+/*
+ * Description: This function is used to query configuration of LEDs on a given
+ * port. Each port has individual set of LEDs associated with it. These LEDs are
+ * used for speed/link configuration as well as activity indicator
+ * configuration. Up to three LEDs can be configured, one for activity and two
+ * for speeds.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_led_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (56 bytes) */
+struct hwrm_port_led_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are configured on this port. Up to 4
+ * LEDs can be returned in the response.
+ */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_type;
+ /* The type of LED #0. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led0_state;
+ /* The current state of the LED #0. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led0_color;
+ /* The color of LED #0. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t led0_blink_on;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led0_blink_off;
+ /*
+ * If the LED #0 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 is not grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_type;
+ /* The type of LED #1. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led1_state;
+ /* The current state of the LED #1. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led1_color;
+ /* The color of LED #1. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_1;
+ uint16_t led1_blink_on;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led1_blink_off;
+ /*
+ * If the LED #1 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #1 is not grouped. For all other
+ * non-zero values of this field, LED #1 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_type;
+ /* The type of LED #2. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led2_state;
+ /* The current state of the LED #2. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led2_color;
+ /* The color of LED #2. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_2;
+ uint16_t led2_blink_on;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led2_blink_off;
+ /*
+ * If the LED #2 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #2 belongs to.
+ * If set to 0, then the LED #2 is not grouped. For all other
+ * non-zero values of this field, LED #2 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_type;
+ /* The type of LED #3. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led3_state;
+ /* The current state of the LED #3. */
+ /* Default state of the LED */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0)
+ /* Off */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1)
+ /* On */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2)
+ /* Blink */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3)
+ /* Blink Alternately */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4)
+ uint8_t led3_color;
+ /* The color of LED #3. */
+ /* Default */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0)
+ /* Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1)
+ /* Green */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2)
+ /* Green or Amber */
+ #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3)
+ uint8_t unused_3;
+ uint16_t led3_blink_on;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED on
+ * between cycles.
+ */
+ uint16_t led3_blink_off;
+ /*
+ * If the LED #3 state is "blink" or "blinkalt", then this field
+ * represents the requested time in milliseconds to keep LED off
+ * between cycles.
+ */
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #3 is not grouped. For all other
+ * non-zero values of this field, LED #3 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_4;
+ uint16_t unused_5;
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint8_t unused_8;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_port_led_qcaps */
+/*
+ * Description: This function is used to query capabilities of LEDs on a given
+ * port. Each port has individual set of LEDs associated with it. These LEDs are
+ * used for speed/link configuration as well as activity indicator
+ * configuration.
+ */
+/* Input (24 bytes) */
+struct hwrm_port_led_qcaps_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint16_t port_id;
+ /* Port ID of port whose LED configuration is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (48 bytes) */
+struct hwrm_port_led_qcaps_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t num_leds;
+ /*
+ * The number of LEDs that are configured on this port. Up to 4
+ * LEDs can be returned in the response.
+ */
+ uint8_t unused_0[3];
+ /* Reserved for future use. */
+ uint8_t led0_id;
+ /* An identifier for the LED #0. */
+ uint8_t led0_type;
+ /* The type of LED #0. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led0_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_1;
+ uint16_t led0_state_caps;
+ /* The states supported by LED #0. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led0_color_caps;
+ /* The colors supported by LED #0. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led1_id;
+ /* An identifier for the LED #1. */
+ uint8_t led1_type;
+ /* The type of LED #1. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led1_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #1 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_2;
+ uint16_t led1_state_caps;
+ /* The states supported by LED #1. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led1_color_caps;
+ /* The colors supported by LED #1. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led2_id;
+ /* An identifier for the LED #2. */
+ uint8_t led2_type;
+ /* The type of LED #2. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led2_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #0 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_3;
+ uint16_t led2_state_caps;
+ /* The states supported by LED #2. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led2_color_caps;
+ /* The colors supported by LED #2. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t led3_id;
+ /* An identifier for the LED #3. */
+ uint8_t led3_type;
+ /* The type of LED #3. */
+ /* Speed LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0)
+ /* Activity LED */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1)
+ /* Invalid */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff)
+ uint8_t led3_group_id;
+ /*
+ * An identifier for the group of LEDs that LED #3 belongs to.
+ * If set to 0, then the LED #0 cannot be grouped. For all other
+ * non-zero values of this field, LED #0 is grouped together
+ * with the LEDs with the same group ID value.
+ */
+ uint8_t unused_4;
+ uint16_t led3_state_caps;
+ /* The states supported by LED #3. */
+ /*
+ * If set to 1, this LED is enabled. If set to 0, this LED is
+ * disabled.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED UINT32_C(0x1)
+ /*
+ * If set to 1, off state is supported on this LED. If set to 0,
+ * off state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, on state is supported on this LED. If set to 0,
+ * on state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, blink state is supported on this LED. If set to
+ * 0, blink state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, blink_alt state is supported on this LED. If set
+ * to 0, blink_alt state is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \
+ UINT32_C(0x10)
+ uint16_t led3_color_caps;
+ /* The colors supported by LED #3. */
+ /* reserved */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD UINT32_C(0x1)
+ /*
+ * If set to 1, Amber color is supported on this LED. If set to
+ * 0, Amber color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, Green color is supported on this LED. If set to
+ * 0, Green color is not supported on this LED.
+ */
+ #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \
+ UINT32_C(0x4)
+ uint8_t unused_5;
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_queue_qportcfg */
+/*
+ * Description: This function is called by a driver to query queue configuration
+ * of a port. # The HWRM shall at least advertise one queue with lossy service
+ * profile. # The driver shall use this command to query queue ids before
+ * configuring or using any queues. # If a service profile is not set for a
+ * queue, then the driver shall not use that queue without configuring a service
+ * profile for it. # If the driver is not allowed to configure service profiles,
+ * then the driver shall only use queues for which service profiles are pre-
+ * configured.
+ */
+/* Input (24 bytes) */
+struct hwrm_queue_qportcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* rx path */
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
+ QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
+ uint16_t port_id;
+ /*
+ * Port ID of port for which the queue configuration is being
+ * queried. This field is only required when sent by IPC.
+ */
+ uint16_t unused_0;
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+struct hwrm_queue_qportcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint8_t max_configurable_queues;
+ /*
+ * The maximum number of queues that can be configured on this
+ * port. Valid values range from 1 through 8.
+ */
+ uint8_t max_configurable_lossless_queues;
+ /*
+ * The maximum number of lossless queues that can be configured
+ * on this port. Valid values range from 0 through 8.
+ */
+ uint8_t queue_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_cfg command. Each bit represents a specific queue
+ * where bit 0 represents queue 0 and bit 7 represents queue 7.
+ * # A value of 0 indicates that the queue is not configurable
+ * by the hwrm_queue_cfg command. # A value of 1 indicates that
+ * the queue is configurable. # A hwrm_queue_cfg command shall
+ * return error when trying to configure a queue not
+ * configurable.
+ */
+ uint8_t queue_cfg_info;
+ /* Information about queue configuration. */
+ /*
+ * If this flag is set to '1', then the queues are configured
+ * asymmetrically on TX and RX sides. If this flag is set to
+ * '0', then the queues are configured symmetrically on TX and
+ * RX sides. For symmetric configuration, the queue
+ * configuration including queue ids and service profiles on the
+ * TX side is the same as the corresponding queue configuration
+ * on the RX side.
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG UINT32_C(0x1)
+ uint8_t queue_pfcenable_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pfcenable_cfg command. Each bit represents a
+ * specific priority where bit 0 represents priority 0 and bit 7
+ * represents priority 7. # A value of 0 indicates that the
+ * priority is not configurable by the hwrm_queue_pfcenable_cfg
+ * command. # A value of 1 indicates that the priority is
+ * configurable. # A hwrm_queue_pfcenable_cfg command shall
+ * return error when trying to configure a priority that is not
+ * configurable.
+ */
+ uint8_t queue_pri2cos_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pri2cos_cfg command. Each bit represents a
+ * specific queue where bit 0 represents queue 0 and bit 7
+ * represents queue 7. # A value of 0 indicates that the queue
+ * is not configurable by the hwrm_queue_pri2cos_cfg command. #
+ * A value of 1 indicates that the queue is configurable. # A
+ * hwrm_queue_pri2cos_cfg command shall return error when trying
+ * to configure a queue that is not configurable.
+ */
+ uint8_t queue_cos2bw_cfg_allowed;
+ /*
+ * Bitmask indicating which queues can be configured by the
+ * hwrm_queue_pri2cos_cfg command. Each bit represents a
+ * specific queue where bit 0 represents queue 0 and bit 7
+ * represents queue 7. # A value of 0 indicates that the queue
+ * is not configurable by the hwrm_queue_pri2cos_cfg command. #
+ * A value of 1 indicates that the queue is configurable. # A
+ * hwrm_queue_pri2cos_cfg command shall return error when trying
+ * to configure a queue not configurable.
+ */
+ uint8_t queue_id0;
+ /*
+ * ID of CoS Queue 0. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id0_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t queue_id1;
+ /*
+ * ID of CoS Queue 1. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id1_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t queue_id2;
+ /*
+ * ID of CoS Queue 2. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id2_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t queue_id3;
+ /*
+ * ID of CoS Queue 3. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id3_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t queue_id4;
+ /*
+ * ID of CoS Queue 4. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id4_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t queue_id5;
+ /*
+ * ID of CoS Queue 5. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id5_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t queue_id6;
+ /*
+ * ID of CoS Queue 6. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id6_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t queue_id7;
+ /*
+ * ID of CoS Queue 7. FF - Invalid id # This ID can be used on
+ * any subsequent call to an hwrm command that takes a queue id.
+ * # IDs must always be queried by this command before any use
+ * by the driver or software. # Any driver or software should
+ * not make any assumptions about queue IDs. # A value of 0xff
+ * indicates that the queue is not available. # Available queues
+ * may not be in sequential order.
+ */
+ uint8_t queue_id7_service_profile;
+ /* This value is applicable to CoS queues only. */
+ /* Lossy (best-effort) */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
+ UINT32_C(0x0)
+ /* Lossless */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
+ UINT32_C(0x1)
+ /*
+ * Set to 0xFF... (All Fs) if there is no
+ * service profile specified
+ */
+ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
+ UINT32_C(0xff)
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_alloc */
+/*
+ * Description: This VNIC is a resource in the RX side of the chip that is used
+ * to represent a virtual host "interface". # At the time of VNIC allocation or
+ * configuration, the function can specify whether it wants the requested VNIC
+ * to be the default VNIC for the function or not. # If a function requests
+ * allocation of a VNIC for the first time and a VNIC is successfully allocated
+ * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
+ * for that function. # The default VNIC shall be used for the default action
+ * for a partition or function. # For each VNIC allocated on a function, a
+ * mapping on the RX side to map the allocated VNIC to source virtual interface
+ * shall be performed by the HWRM. This should be hidden to the function driver
+ * requesting the VNIC allocation. This enables broadcast/multicast replication
+ * with source knockout. # If multicast replication with source knockout is
+ * enabled, then the internal VNIC to SVIF mapping data structures shall be
+ * programmed at the time of VNIC allocation.
+ */
+/* Input (24 bytes) */
+struct hwrm_vnic_alloc_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', this VNIC is requested to be the
+ * default VNIC for this function.
+ */
+ #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_free */
+/*
+ * Description: Free a VNIC resource. Idle any resources associated with the
+ * VNIC as well as the VNIC. Reset and release all resources associated with the
+ * VNIC.
+ */
+/* Input (24 bytes) */
+struct hwrm_vnic_free_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_free_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_cfg */
+/* Description: Configure the RX VNIC structure. */
+/* Input (40 bytes) */
+struct hwrm_vnic_cfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is requested to be the default
+ * VNIC for the function.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is being configured to strip
+ * VLAN in the RX path. If set to '0', then VLAN stripping is
+ * disabled on this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is being configured to buffer
+ * receive packets in the hardware until the host posts new
+ * receive buffers. If set to '0', then bd_stall is being
+ * configured to be disabled on this VNIC.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC is being configured to receive
+ * both RoCE and non-RoCE traffic. If set to '0', then this VNIC
+ * is not configured to be operating in dual VNIC mode.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
+ /*
+ * When this flag is set to '1', the VNIC is requested to be
+ * configured to receive only RoCE traffic. If this flag is set
+ * to '0', then this flag shall be ignored by the HWRM. If
+ * roce_dual_vnic_mode flag is set to '1', then the HWRM client
+ * shall not set this flag to '1'.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
+ /*
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where exact match is
+ * used to direct packets to a VNIC with one destination ring
+ * group only, there is no need to configure RSS indirection
+ * table for that VNIC as only one destination ring group is
+ * used. This flag is used to enable a mode where RSS is enabled
+ * in the VNIC using a RSS context for computing RSS hash but
+ * the RSS indirection table is not configured using
+ * hwrm_vnic_rss_cfg. If this mode is enabled, then the driver
+ * should not program RSS indirection table for the RSS context
+ * that is used for computing RSS hash only.
+ */
+ #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dflt_ring_grp field to be
+ * configured.
+ */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1)
+ /* This bit must be '1' for the rss_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2)
+ /* This bit must be '1' for the cos_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4)
+ /* This bit must be '1' for the lb_rule field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8)
+ /* This bit must be '1' for the mru field to be configured. */
+ #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10)
+ uint16_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t dflt_ring_grp;
+ /*
+ * Default Completion ring for the VNIC. This ring will be
+ * chosen if packet does not match any RSS rules and if there is
+ * no COS rule.
+ */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * RSS ID for load balancing rule/table structure. 0xFF... (All
+ * Fs) if there is no LB rule.
+ */
+ uint16_t mru;
+ /*
+ * The maximum receive unit of the vnic. Each vnic is associated
+ * with a function. The vnic mru value overwrites the mru
+ * setting of the associated function. The HWRM shall make sure
+ * that vnic mru does not exceed the mru of the port the
+ * function is associated with.
+ */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_qcfg */
+/*
+ * Description: Query the RX VNIC structure. This function can be used by a PF
+ * driver to query its own VNIC resource or VNIC resource of its child VF. This
+ * function can also be used by a VF driver to query its own VNIC resource.
+ */
+/* Input (32 bytes) */
+struct hwrm_vnic_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+ uint32_t enables;
+ /* This bit must be '1' for the vf_id_valid field to be configured. */
+ #define HWRM_VNIC_QCFG_INPUT_ENABLES_VF_ID_VALID UINT32_C(0x1)
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t vf_id;
+ /* ID of Virtual Function whose VNIC resource is being queried. */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (32 bytes) */
+struct hwrm_vnic_qcfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint16_t dflt_ring_grp;
+ /* Default Completion ring for the VNIC. */
+ uint16_t rss_rule;
+ /*
+ * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
+ * there is no RSS rule.
+ */
+ uint16_t cos_rule;
+ /*
+ * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
+ * there is no COS rule.
+ */
+ uint16_t lb_rule;
+ /*
+ * RSS ID for load balancing rule/table structure. 0xFF... (All
+ * Fs) if there is no LB rule.
+ */
+ uint16_t mru;
+ /* The maximum receive unit of the vnic. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is the default VNIC for the
+ * function.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_DEFAULT UINT32_C(0x1)
+ /*
+ * When this bit is '1', the VNIC is configured to strip VLAN in
+ * the RX path. If set to '0', then VLAN stripping is disabled
+ * on this VNIC.
+ */
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC is configured to buffer
+ * receive packets in the hardware until the host posts new
+ * receive buffers. If set to '0', then bd_stall is disabled on
+ * this VNIC.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_SPEED UINT32_C(0x2)
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
/*
- * Select the auto_link_speed or any speed below
- * that speed for autoneg. This mode has been
- * DEPRECATED. An HWRM client should not use
- * this mode.
+ * When this bit is '1', the VNIC is configured to receive both
+ * RoCE and non-RoCE traffic. If set to '0', then this VNIC is
+ * not configured to operate in dual VNIC mode.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_ONE_OR_BELOW \
- UINT32_C(0x3)
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
/*
- * Select the speeds based on the corresponding
- * link speed mask value that is provided.
+ * When this flag is set to '1', the VNIC is configured to
+ * receive only RoCE traffic. When this flag is set to '0', the
+ * VNIC is not configured to receive only RoCE traffic. If
+ * roce_dual_vnic_mode flag and this flag both are set to '1',
+ * then it is an invalid configuration of the VNIC. The HWRM
+ * should not allow that type of mis-configuration by HWRM
+ * clients.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_MODE_SPEED_MASK UINT32_C(0x4)
- uint8_t auto_pause;
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
/*
- * Current setting of pause autonegotiation. Move autoneg_pause
- * flag here.
+ * When a VNIC uses one destination ring group for certain
+ * application (e.g. Receive Flow Steering) where exact match is
+ * used to direct packets to a VNIC with one destination ring
+ * group only, there is no need to configure RSS indirection
+ * table for that VNIC as only one destination ring group is
+ * used. When this bit is set to '1', then the VNIC is enabled
+ * in a mode where RSS is enabled in the VNIC using a RSS
+ * context for computing RSS hash but the RSS indirection table
+ * is not configured.
*/
+ #define HWRM_VNIC_QCFG_OUTPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
+ uint32_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t valid;
/*
- * When this bit is '1', Generation of tx pause messages has
- * been requested. Disabled otherwise.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_TX UINT32_C(0x1)
+} __attribute__((packed));
+
+/* hwrm_vnic_rss_cfg */
+/* Description: This function is used to enable RSS configuration. */
+/* Input (48 bytes) */
+struct hwrm_vnic_rss_cfg_input {
+ uint16_t req_type;
/*
- * When this bit is '1', Reception of rx pause messages has been
- * requested. Disabled otherwise.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_RX UINT32_C(0x2)
+ uint16_t cmpl_ring;
/*
- * When set to 1, the advertisement of pause is enabled. # When
- * the auto_mode is not set to none and this flag is set to 1,
- * then the auto_pause bits on this port are being advertised
- * and autoneg pause results are being interpreted. # When the
- * auto_mode is not set to none and this flag is set to 0, the
- * pause is forced as indicated in force_pause, and also
- * advertised as auto_pause bits, but the autoneg results are
- * not interpreted since the pause configuration is being
- * forced. # When the auto_mode is set to none and this flag is
- * set to 1, auto_pause bits should be ignored and should be set
- * to 0.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_PAUSE_AUTONEG_PAUSE \
- UINT32_C(0x4)
- uint16_t auto_link_speed;
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * Current setting for auto_link_speed. This field is only valid
- * when auto_mode is set to "one_speed" or "one_or_below".
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- /* 100Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100MB UINT32_C(0x1)
- /* 1Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_1GB UINT32_C(0xa)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2GB UINT32_C(0x14)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_2_5GB UINT32_C(0x19)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10GB UINT32_C(0x64)
- /* 20Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_20GB UINT32_C(0xc8)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_25GB UINT32_C(0xfa)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_40GB UINT32_C(0x190)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_50GB UINT32_C(0x1f4)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_100GB UINT32_C(0x3e8)
- /* 10Mb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_10MB UINT32_C(0xffff)
- uint16_t auto_link_speed_mask;
+ uint64_t resp_addr;
/*
- * Current setting for auto_link_speed_mask that is used to
- * advertise speeds during autonegotiation. This field is only
- * valid when auto_mode is set to "mask". The speeds specified
- * in this field shall be a subset of supported speeds on this
- * port.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- /* 100Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MBHD \
- UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100MB \
- UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GBHD \
- UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_1GB \
- UINT32_C(0x8)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2GB \
- UINT32_C(0x10)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_2_5GB \
- UINT32_C(0x20)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10GB \
- UINT32_C(0x40)
- /* 20Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_20GB \
- UINT32_C(0x80)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_25GB \
- UINT32_C(0x100)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_40GB \
- UINT32_C(0x200)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_50GB \
- UINT32_C(0x400)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_100GB \
- UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MBHD \
- UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_AUTO_LINK_SPEED_MASK_10MB \
- UINT32_C(0x2000)
- uint8_t wirespeed;
- /* Current setting for wirespeed. */
- /* Wirespeed feature is disabled. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_OFF UINT32_C(0x0)
- /* Wirespeed feature is enabled. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_WIOUTPUTEED_ON UINT32_C(0x1)
- uint8_t lpbk;
- /* Current setting for loopback. */
- /* No loopback is selected. Normal operation. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_NONE UINT32_C(0x0)
+ uint32_t hash_type;
/*
- * The HW will be configured with local loopback
- * such that host data is sent back to the host
- * without modification.
+ * When this bit is '1', the RSS hash shall be computed over
+ * source and destination IPv4 addresses of IPv4 packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_LOCAL UINT32_C(0x1)
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
/*
- * The HW will be configured with remote
- * loopback such that port logic will send
- * packets back out the transmitter that are
- * received.
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination
+ * ports of TCP/IPv4 packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LPBK_REMOTE UINT32_C(0x2)
- uint8_t force_pause;
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
/*
- * Current setting of forced pause. When the pause configuration
- * is not being forced, then this value shall be set to 0.
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv4 addresses and source/destination
+ * ports of UDP/IPv4 packets.
*/
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
/*
- * When this bit is '1', Generation of tx pause messages is
- * supported. Disabled otherwise.
+ * When this bit is '1', the RSS hash shall be computed over
+ * source and destination IPv4 addresses of IPv6 packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_TX UINT32_C(0x1)
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
/*
- * When this bit is '1', Reception of rx pause messages is
- * supported. Disabled otherwise.
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination
+ * ports of TCP/IPv6 packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FORCE_PAUSE_RX UINT32_C(0x2)
- uint8_t module_status;
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
/*
- * This value indicates the current status of the optics module
- * on this port.
+ * When this bit is '1', the RSS hash shall be computed over
+ * source/destination IPv6 addresses and source/destination
+ * ports of UDP/IPv6 packets.
*/
- /* Module is inserted and accepted */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NONE UINT32_C(0x0)
- /* Module is rejected and transmit side Laser is disabled. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_DISABLETX \
- UINT32_C(0x1)
- /* Module mismatch warning. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_WARNINGMSG \
- UINT32_C(0x2)
- /* Module is rejected and powered down. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_PWRDOWN UINT32_C(0x3)
- /* Module is not inserted. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTINSERTED \
- UINT32_C(0x4)
- /* Module status is not applicable. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MODULE_STATUS_NOTAPPLICABLE \
- UINT32_C(0xff)
- uint32_t preemphasis;
- /* Current setting for preemphasis. */
- uint8_t phy_maj;
- /* This field represents the major version of the PHY. */
- uint8_t phy_min;
- /* This field represents the minor version of the PHY. */
- uint8_t phy_bld;
- /* This field represents the build version of the PHY. */
- uint8_t phy_type;
- /* This value represents a PHY type. */
- /* Unknown */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_UNKNOWN UINT32_C(0x0)
- /* BASE-CR */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASECR UINT32_C(0x1)
- /* BASE-KR4 (Deprecated) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR4 UINT32_C(0x2)
- /* BASE-LR */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASELR UINT32_C(0x3)
- /* BASE-SR */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASESR UINT32_C(0x4)
- /* BASE-KR2 (Deprecated) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR2 UINT32_C(0x5)
- /* BASE-KX */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKX UINT32_C(0x6)
- /* BASE-KR */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASEKR UINT32_C(0x7)
- /* BASE-T */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASET UINT32_C(0x8)
- /* EEE capable BASE-T */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_BASETE UINT32_C(0x9)
- /* SGMII connected external PHY */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_TYPE_SGMIIEXTPHY UINT32_C(0xa)
- uint8_t media_type;
- /* This value represents a media type. */
- /* Unknown */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_UNKNOWN UINT32_C(0x0)
- /* Twisted Pair */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_TP UINT32_C(0x1)
- /* Direct Attached Copper */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_DAC UINT32_C(0x2)
- /* Fiber */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_MEDIA_TYPE_FIBRE UINT32_C(0x3)
- uint8_t xcvr_pkg_type;
- /* This value represents a transceiver type. */
- /* PHY and MAC are in the same package */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_INTERNAL \
- UINT32_C(0x1)
- /* PHY and MAC are in different packages */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_PKG_TYPE_XCVR_EXTERNAL \
- UINT32_C(0x2)
- uint8_t eee_config_phy_addr;
+ #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint32_t unused_0;
+ uint64_t ring_grp_tbl_addr;
+ /* This is the address for rss ring group table */
+ uint64_t hash_key_tbl_addr;
+ /* This is the address for rss hash key table */
+ uint16_t rss_ctx_idx;
+ /* Index to the rss indirection table. */
+ uint16_t unused_1[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_rss_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * This field represents flags related to EEE configuration.
- * These EEE configuration flags are valid only when the
- * auto_mode is not set to none (in other words autonegotiation
- * is enabled).
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- /* This field represents PHY address. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_MASK UINT32_C(0x1f)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PHY_ADDR_SFT 0
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
/*
- * When set to 1, Energy Efficient Ethernet (EEE) mode is
- * enabled. Speeds for autoneg with EEE mode enabled are based
- * on eee_link_speed_mask.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ENABLED \
- UINT32_C(0x20)
+} __attribute__((packed));
+
+/* hwrm_vnic_plcmodes_cfg */
+/*
+ * Description: This function can be used to set placement mode configuration of
+ * the VNIC.
+ */
+/* Input (40 bytes) */
+
+struct hwrm_vnic_plcmodes_cfg_input {
+ uint16_t req_type;
/*
- * This flag is valid only when eee_enabled is set to 1. # If
- * eee_enabled is set to 0, then EEE mode is disabled and this
- * flag shall be ignored. # If eee_enabled is set to 1 and this
- * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
- * is enabled and in use. # If eee_enabled is set to 1 and this
- * flag is set to 0, then Energy Efficient Ethernet (EEE) mode
- * is enabled but is currently not in use.
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_ACTIVE UINT32_C(0x40)
+ uint16_t cmpl_ring;
/*
- * This flag is valid only when eee_enabled is set to 1. # If
- * eee_enabled is set to 0, then EEE mode is disabled and this
- * flag shall be ignored. # If eee_enabled is set to 1 and this
- * flag is set to 1, then Energy Efficient Ethernet (EEE) mode
- * is enabled and TX LPI is enabled. # If eee_enabled is set to
- * 1 and this flag is set to 0, then Energy Efficient Ethernet
- * (EEE) mode is enabled but TX LPI is disabled.
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_EEE_TX_LPI UINT32_C(0x80)
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * This field represents flags related to EEE configuration.
- * These EEE configuration flags are valid only when the
- * auto_mode is not set to none (in other words autonegotiation
- * is enabled).
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_MASK UINT32_C(0xe0)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_EEE_CONFIG_SFT 5
- uint8_t parallel_detect;
- /* Reserved field, set to 0 */
+ uint64_t resp_addr;
/*
- * When set to 1, the parallel detection is used to determine
- * the speed of the link partner. Parallel detection is used
- * when a autonegotiation capable device is connected to a link
- * parter that is not capable of autonegotiation.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_PARALLEL_DETECT UINT32_C(0x1)
- /* Reserved field, set to 0 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_MASK UINT32_C(0xfe)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_RESERVED_SFT 1
- uint16_t link_partner_adv_speeds;
+ uint32_t flags;
/*
- * The advertised speeds for the port by the link partner. Each
- * advertised speed will be set to '1'.
+ * When this bit is '1', the VNIC shall be configured to use regular
+ * placement algorithm. By default, the regular placement algorithm
+ * shall be enabled on the VNIC.
*/
- /* 100Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MBHD \
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_REGULAR_PLACEMENT \
UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100MB \
- UINT32_C(0x2)
- /* 1Gb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GBHD \
- UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_1GB \
- UINT32_C(0x8)
- /* 2Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2GB \
- UINT32_C(0x10)
- /* 2.5Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_2_5GB \
- UINT32_C(0x20)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10GB \
- UINT32_C(0x40)
- /* 20Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_20GB \
- UINT32_C(0x80)
- /* 25Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_25GB \
- UINT32_C(0x100)
- /* 40Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_40GB \
- UINT32_C(0x200)
- /* 50Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_50GB \
- UINT32_C(0x400)
- /* 100Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_100GB \
- UINT32_C(0x800)
- /* 10Mb link speed (Half-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MBHD \
- UINT32_C(0x1000)
- /* 10Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_SPEEDS_10MB \
- UINT32_C(0x2000)
- uint8_t link_partner_adv_auto_mode;
/*
- * The advertised autoneg for the port by the link partner. This
- * field is deprecated and should be set to 0.
+ * When this bit is '1', the VNIC shall be configured use the jumbo
+ * placement algorithm.
*/
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_JUMBO_PLACEMENT \
+ UINT32_C(0x2)
/*
- * Disable autoneg or autoneg disabled. No
- * speeds are selected.
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for IPv4 packets according to the following rules: # If
+ * the packet is identified as TCP/IPv4, then the packet is split at the
+ * beginning of the TCP payload. # If the packet is identified as
+ * UDP/IPv4, then the packet is split at the beginning of UDP payload. #
+ * If the packet is identified as non-TCP and non-UDP IPv4 packet, then
+ * the packet is split at the beginning of the upper layer protocol
+ * header carried in the IPv4 packet.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_NONE \
- UINT32_C(0x0)
- /* Select all possible speeds for autoneg mode. */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ALL_SPEEDS \
- UINT32_C(0x1)
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV4 UINT32_C(0x4)
/*
- * Select only the auto_link_speed speed for
- * autoneg mode. This mode has been DEPRECATED.
- * An HWRM client should not use this mode.
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for IPv6 packets according to the following rules: # If
+ * the packet is identified as TCP/IPv6, then the packet is split at the
+ * beginning of the TCP payload. # If the packet is identified as
+ * UDP/IPv6, then the packet is split at the beginning of UDP payload. #
+ * If the packet is identified as non-TCP and non-UDP IPv6 packet, then
+ * the packet is split at the beginning of the upper layer protocol
+ * header carried in the IPv6 packet.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_SPEED \
- UINT32_C(0x2)
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_IPV6 UINT32_C(0x8)
/*
- * Select the auto_link_speed or any speed below
- * that speed for autoneg. This mode has been
- * DEPRECATED. An HWRM client should not use
- * this mode.
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for FCoE packets at the beginning of FC payload.
*/
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_ONE_OR_BELOW \
- UINT32_C(0x3)
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_FCOE UINT32_C(0x10)
/*
- * Select the speeds based on the corresponding
- * link speed mask value that is provided.
+ * When this bit is '1', the VNIC shall be configured to enable Header-
+ * Data split for RoCE packets at the beginning of RoCE payload (after
+ * BTH/GRH headers).
*/
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_AUTO_MODE_SPEED_MASK \
- UINT32_C(0x4)
- uint8_t link_partner_adv_pause;
- /* The advertised pause settings on the port by the link partner. */
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_FLAGS_HDS_ROCE UINT32_C(0x20)
+ uint32_t enables;
/*
- * When this bit is '1', Generation of tx pause messages is
- * supported. Disabled otherwise.
+ * This bit must be '1' for the jumbo_thresh_valid field to be
+ * configured.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_TX \
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_JUMBO_THRESH_VALID \
UINT32_C(0x1)
/*
- * When this bit is '1', Reception of rx pause messages is
- * supported. Disabled otherwise.
+ * This bit must be '1' for the hds_offset_valid field to be configured.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_PAUSE_RX \
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_OFFSET_VALID \
UINT32_C(0x2)
- uint16_t adv_eee_link_speed_mask;
/*
- * Current setting for link speed mask that is used to advertise
- * speeds during autonegotiation when EEE is enabled. This field
- * is valid only when eee_enabled flags is set to 1. The speeds
- * specified in this field shall be a subset of speeds specified
- * in auto_link_speed_mask.
+ * This bit must be '1' for the hds_threshold_valid field to be
+ * configured.
*/
- /* Reserved */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
- UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_100MB \
- UINT32_C(0x2)
- /* Reserved */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
+ #define HWRM_VNIC_PLCMODES_CFG_INPUT_ENABLES_HDS_THRESHOLD_VALID \
UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_1GB \
- UINT32_C(0x8)
- /* Reserved */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
- UINT32_C(0x10)
- /* Reserved */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
- UINT32_C(0x20)
- /* 10Gb link speed */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_ADV_EEE_LINK_SPEED_MASK_10GB \
- UINT32_C(0x40)
- uint16_t link_partner_adv_eee_link_speed_mask;
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t jumbo_thresh;
/*
- * Current setting for link speed mask that is advertised by the
- * link partner when EEE is enabled. This field is valid only
- * when eee_enabled flags is set to 1.
+ * When jumbo placement algorithm is enabled, this value is used to
+ * determine the threshold for jumbo placement. Packets with length
+ * larger than this value will be placed according to the jumbo
+ * placement algorithm.
*/
- /* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD1 \
- UINT32_C(0x1)
- /* 100Mb link speed (Full-duplex) */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_100MB \
- UINT32_C(0x2)
- /* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD2 \
- UINT32_C(0x4)
- /* 1Gb link speed (Full-duplex) */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_1GB \
- UINT32_C(0x8)
- /* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD3 \
- UINT32_C(0x10)
- /* Reserved */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_RSVD4 \
- UINT32_C(0x20)
- /* 10Gb link speed */
- #define \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_ADV_EEE_LINK_SPEED_MASK_10GB \
- UINT32_C(0x40)
- uint32_t xcvr_identifier_type_tx_lpi_timer;
- /* This value represents transceiver identifier type. */
+ uint16_t hds_offset;
/*
- * Current setting of TX LPI timer in microseconds. This field
- * is valid only when_eee_enabled flag is set to 1 and
- * tx_lpi_enabled is set to 1.
+ * This value is used to determine the offset into packet buffer where
+ * the split data (payload) will be placed according to one of of HDS
+ * placement algorithm. The lengths of packet buffers provided for split
+ * data shall be larger than this value.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_MASK \
- UINT32_C(0xffffff)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_TX_LPI_TIMER_SFT 0
- /* This value represents transceiver identifier type. */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_MASK \
- UINT32_C(0xff000000)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFT 24
- /* Unknown */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_UNKNOWN \
- (UINT32_C(0x0) << 24)
- /* SFP/SFP+/SFP28 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_SFP \
- (UINT32_C(0x3) << 24)
- /* QSFP */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP \
- (UINT32_C(0xc) << 24)
- /* QSFP+ */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFPPLUS \
- (UINT32_C(0xd) << 24)
- /* QSFP28 */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_XCVR_IDENTIFIER_TYPE_QSFP28 \
- (UINT32_C(0x11) << 24)
- uint16_t fec_cfg;
+ uint16_t hds_threshold;
+ /*
+ * When one of the HDS placement algorithm is enabled, this value is
+ * used to determine the threshold for HDS placement. Packets with
+ * length larger than this value will be placed according to the HDS
+ * placement algorithm. This value shall be in multiple of 4 bytes.
+ */
+ uint16_t unused_0[3];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+
+struct hwrm_vnic_plcmodes_cfg_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
+ /*
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
+ */
+} __attribute__((packed));
+
+/* hwrm_vnic_plcmodes_qcfg */
+/*
+ * Description: This function can be used to query placement mode configuration
+ * of the VNIC.
+ */
+/* Input (24 bytes) */
+
+struct hwrm_vnic_plcmodes_qcfg_input {
+ uint16_t req_type;
+ /*
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
+ */
+ uint64_t resp_addr;
/*
- * This value represents the current configuration of Forward
- * Error Correction (FEC) on the port.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
+ uint32_t vnic_id;
+ /* Logical vnic ID */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (24 bytes) */
+
+struct hwrm_vnic_plcmodes_qcfg_output {
+ uint16_t error_code;
/*
- * When set to 1, then FEC is not supported on this port. If
- * this flag is set to 1, then all other FEC configuration flags
- * shall be ignored. When set to 0, then FEC is supported as
- * indicated by other configuration flags. If no cable is
- * attached and the HWRM does not yet know the FEC capability,
- * then the HWRM shall set this flag to 1 when reporting FEC
- * capability.
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_NONE_SUPPORTED \
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
+ */
+ uint32_t flags;
+ /*
+ * When this bit is '1', the VNIC is configured to use regular placement
+ * algorithm.
+ */
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_REGULAR_PLACEMENT \
UINT32_C(0x1)
/*
- * When set to 1, then FEC autonegotiation is supported on this
- * port. When set to 0, then FEC autonegotiation is not
- * supported on this port.
+ * When this bit is '1', the VNIC is configured to use the jumbo
+ * placement algorithm.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_SUPPORTED \
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_JUMBO_PLACEMENT \
UINT32_C(0x2)
/*
- * When set to 1, then FEC autonegotiation is enabled on this
- * port. When set to 0, then FEC autonegotiation is disabled if
- * supported. This flag should be ignored if FEC autonegotiation
- * is not supported on this port.
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for IPv4 packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_AUTONEG_ENABLED \
- UINT32_C(0x4)
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV4 UINT32_C(0x4)
/*
- * When set to 1, then FEC CLAUSE 74 (Fire Code) is supported on
- * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
- * not supported on this port.
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for IPv6 packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_SUPPORTED \
- UINT32_C(0x8)
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_IPV6 UINT32_C(0x8)
/*
- * When set to 1, then FEC CLAUSE 74 (Fire Code) is enabled on
- * this port. When set to 0, then FEC CLAUSE 74 (Fire Code) is
- * disabled if supported. This flag should be ignored if FEC
- * CLAUSE 74 is not supported on this port.
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for FCoE packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
- UINT32_C(0x10)
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_FCOE UINT32_C(0x10)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported
- * on this port. When set to 0, then FEC CLAUSE 91 (Reed
- * Solomon) is not supported on this port.
+ * When this bit is '1', the VNIC is configured to enable Header-Data
+ * split for RoCE packets.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
- UINT32_C(0x20)
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_HDS_ROCE UINT32_C(0x20)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled
- * on this port. When set to 0, then FEC CLAUSE 91 (Reed
- * Solomon) is disabled if supported. This flag should be
- * ignored if FEC CLAUSE 91 is not supported on this port.
+ * When this bit is '1', the VNIC is configured to be the default VNIC
+ * of the requesting function.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
- UINT32_C(0x40)
+ #define HWRM_VNIC_PLCMODES_QCFG_OUTPUT_FLAGS_DFLT_VNIC UINT32_C(0x40)
+ uint16_t jumbo_thresh;
+ /*
+ * When jumbo placement algorithm is enabled, this value is used to
+ * determine the threshold for jumbo placement. Packets with length
+ * larger than this value will be placed according to the jumbo
+ * placement algorithm.
+ */
+ uint16_t hds_offset;
+ /*
+ * This value is used to determine the offset into packet buffer where
+ * the split data (payload) will be placed according to one of of HDS
+ * placement algorithm. The lengths of packet buffers provided for split
+ * data shall be larger than this value.
+ */
+ uint16_t hds_threshold;
+ /*
+ * When one of the HDS placement algorithm is enabled, this value is
+ * used to determine the threshold for HDS placement. Packets with
+ * length larger than this value will be placed according to the HDS
+ * placement algorithm. This value shall be in multiple of 4 bytes.
+ */
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- char phy_vendor_name[16];
+ uint8_t unused_3;
+ uint8_t unused_4;
+ uint8_t valid;
/*
- * Up to 16 bytes of null padded ASCII string representing PHY
- * vendor. If the string is set to null, then the vendor name is
- * not available.
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
*/
- char phy_vendor_partnumber[16];
+} __attribute__((packed));
+
+/* hwrm_vnic_rss_cos_lb_ctx_alloc */
+/* Description: This function is used to allocate COS/Load Balance context. */
+/* Input (16 bytes) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+ uint16_t req_type;
/*
- * Up to 16 bytes of null padded ASCII string that identifies
- * vendor specific part number of the PHY. If the string is set
- * to null, then the vendor specific part number is not
- * available.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- uint32_t unused_3;
+ uint16_t cmpl_ring;
+ /*
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
+ /*
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
+ */
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
+ uint16_t error_code;
+ /*
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
+ */
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
+ /*
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+ uint16_t rss_cos_lb_ctx_id;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
uint8_t unused_4;
- uint8_t unused_5;
- uint8_t unused_6;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_queue_qportcfg */
-/*
- * Description: This function is called by a driver to query queue configuration
- * of a port. # The HWRM shall at least advertise one queue with lossy service
- * profile. # The driver shall use this command to query queue ids before
- * configuring or using any queues. # If a service profile is not set for a
- * queue, then the driver shall not use that queue without configuring a service
- * profile for it. # If the driver is not allowed to configure service profiles,
- * then the driver shall only use queues for which service profiles are pre-
- * configured.
- */
-/* Input (24 bytes) */
-struct hwrm_queue_qportcfg_input {
+/* hwrm_vnic_rss_cos_lb_ctx_free */
+/* Description: This function can be used to free COS/Load Balance context. */
+/* Input (24 bytes) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
- /*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* rx path */
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \
- QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX
- uint16_t port_id;
- /*
- * Port ID of port for which the queue configuration is being
- * queried. This field is only required when sent by IPC.
- */
- uint16_t unused_0;
+ uint16_t rss_cos_lb_ctx_id;
+ /* rss_cos_lb_ctx_id is 16 b */
+ uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (32 bytes) */
-struct hwrm_queue_qportcfg_output {
+/* Output (16 bytes) */
+struct hwrm_vnic_rss_cos_lb_ctx_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint8_t max_configurable_queues;
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
/*
- * The maximum number of queues that can be configured on this
- * port. Valid values range from 1 through 8.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t max_configurable_lossless_queues;
+} __attribute__((packed));
+
+/* hwrm_vnic_tpa_cfg */
+/* Description: This function is used to enable/configure TPA on the VNIC. */
+/* Input (40 bytes) */
+struct hwrm_vnic_tpa_cfg_input {
+ uint16_t req_type;
/*
- * The maximum number of lossless queues that can be configured
- * on this port. Valid values range from 0 through 8.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- uint8_t queue_cfg_allowed;
+ uint16_t cmpl_ring;
/*
- * Bitmask indicating which queues can be configured by the
- * hwrm_queue_cfg command. Each bit represents a specific queue
- * where bit 0 represents queue 0 and bit 7 represents queue 7.
- * # A value of 0 indicates that the queue is not configurable
- * by the hwrm_queue_cfg command. # A value of 1 indicates that
- * the queue is configurable. # A hwrm_queue_cfg command shall
- * return error when trying to configure a queue not
- * configurable.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- uint8_t queue_cfg_info;
- /* Information about queue configuration. */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * If this flag is set to '1', then the queues are configured
- * asymmetrically on TX and RX sides. If this flag is set to
- * '0', then the queues are configured symmetrically on TX and
- * RX sides. For symmetric configuration, the queue
- * configuration including queue ids and service profiles on the
- * TX side is the same as the corresponding queue configuration
- * on the RX side.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \
- UINT32_C(0x1)
- uint8_t queue_pfcenable_cfg_allowed;
+ uint64_t resp_addr;
/*
- * Bitmask indicating which queues can be configured by the
- * hwrm_queue_pfcenable_cfg command. Each bit represents a
- * specific queue where bit 0 represents queue 0 and bit 7
- * represents queue 7. # A value of 0 indicates that the queue
- * is not configurable by the hwrm_queue_pfcenable_cfg command.
- * # A value of 1 indicates that the queue is configurable. # A
- * hwrm_queue_pfcenable_cfg command shall return error when
- * trying to configure a queue that is not configurable.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- uint8_t queue_pri2cos_cfg_allowed;
+ uint32_t flags;
/*
- * Bitmask indicating which queues can be configured by the
- * hwrm_queue_pri2cos_cfg command. Each bit represents a
- * specific queue where bit 0 represents queue 0 and bit 7
- * represents queue 7. # A value of 0 indicates that the queue
- * is not configurable by the hwrm_queue_pri2cos_cfg command. #
- * A value of 1 indicates that the queue is configurable. # A
- * hwrm_queue_pri2cos_cfg command shall return error when trying
- * to configure a queue that is not configurable.
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) of non-tunneled TCP
+ * packets.
*/
- uint8_t queue_cos2bw_cfg_allowed;
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_TPA UINT32_C(0x1)
/*
- * Bitmask indicating which queues can be configured by the
- * hwrm_queue_pri2cos_cfg command. Each bit represents a
- * specific queue where bit 0 represents queue 0 and bit 7
- * represents queue 7. # A value of 0 indicates that the queue
- * is not configurable by the hwrm_queue_pri2cos_cfg command. #
- * A value of 1 indicates that the queue is configurable. # A
- * hwrm_queue_pri2cos_cfg command shall return error when trying
- * to configure a queue not configurable.
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) of tunneled TCP packets.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_ENCAP_TPA UINT32_C(0x2)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) according to Windows
+ * Receive Segment Coalescing (RSC) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_RSC_WND_UPDATE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) according to Linux
+ * Generic Receive Offload (GRO) rules.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO UINT32_C(0x8)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) for TCP packets with IP
+ * ECN set to non-zero.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_ECN UINT32_C(0x10)
+ /*
+ * When this bit is '1', the VNIC shall be configured to perform
+ * transparent packet aggregation (TPA) for GRE tunneled TCP
+ * packets only if all packets have the same GRE sequence.
+ */
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_AGG_WITH_SAME_GRE_SEQ \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1' and the GRO mode is enabled, the VNIC
+ * shall be configured to perform transparent packet aggregation
+ * (TPA) for TCP/IPv4 packets with consecutively increasing
+ * IPIDs. In other words, the last packet that is being
+ * aggregated to an already existing aggregation context shall
+ * have IPID 1 more than the IPID of the last packet that was
+ * aggregated in that aggregation context.
*/
- uint8_t queue_id0;
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_IPID_CHECK UINT32_C(0x40)
/*
- * ID of CoS Queue 0. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * When this bit is '1' and the GRO mode is enabled, the VNIC
+ * shall be configured to perform transparent packet aggregation
+ * (TPA) for TCP packets with the same TTL (IPv4) or Hop limit
+ * (IPv6) value.
*/
- uint8_t queue_id0_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+ #define HWRM_VNIC_TPA_CFG_INPUT_FLAGS_GRO_TTL_CHECK UINT32_C(0x80)
+ uint32_t enables;
+ /* This bit must be '1' for the max_agg_segs field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_SEGS UINT32_C(0x1)
+ /* This bit must be '1' for the max_aggs field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGGS UINT32_C(0x2)
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * This bit must be '1' for the max_agg_timer field to be
+ * configured.
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t queue_id1;
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MAX_AGG_TIMER UINT32_C(0x4)
+ /* This bit must be '1' for the min_agg_len field to be configured. */
+ #define HWRM_VNIC_TPA_CFG_INPUT_ENABLES_MIN_AGG_LEN UINT32_C(0x8)
+ uint16_t vnic_id;
+ /* Logical vnic ID */
+ uint16_t max_agg_segs;
+ /*
+ * This is the maximum number of TCP segments that can be
+ * aggregated (unit is Log2). Max value is 31.
+ */
+ /* 1 segment */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_1 UINT32_C(0x0)
+ /* 2 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_2 UINT32_C(0x1)
+ /* 4 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_4 UINT32_C(0x2)
+ /* 8 segments */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_8 UINT32_C(0x3)
+ /* Any segment size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGG_SEGS_MAX UINT32_C(0x1f)
+ uint16_t max_aggs;
+ /*
+ * This is the maximum number of aggregations this VNIC is
+ * allowed (unit is Log2). Max value is 7
+ */
+ /* 1 aggregation */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_1 UINT32_C(0x0)
+ /* 2 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_2 UINT32_C(0x1)
+ /* 4 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_4 UINT32_C(0x2)
+ /* 8 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_8 UINT32_C(0x3)
+ /* 16 aggregations */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_16 UINT32_C(0x4)
+ /* Any aggregation size larger than this is not valid */
+ #define HWRM_VNIC_TPA_CFG_INPUT_MAX_AGGS_MAX UINT32_C(0x7)
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t max_agg_timer;
/*
- * ID of CoS Queue 1. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * This is the maximum amount of time allowed for an aggregation
+ * context to complete after it was initiated.
*/
- uint8_t queue_id1_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+ uint32_t min_agg_len;
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * This is the minimum amount of payload length required to
+ * start an aggregation context.
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t queue_id2;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_vnic_tpa_cfg_output {
+ uint16_t error_code;
/*
- * ID of CoS Queue 2. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint8_t queue_id2_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t queue_id3;
+ uint32_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t valid;
/*
- * ID of CoS Queue 3. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- uint8_t queue_id3_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+} __attribute__((packed));
+
+/* hwrm_ring_alloc */
+/*
+ * Description: This command allocates and does basic preparation for a ring.
+ */
+/* Input (80 bytes) */
+struct hwrm_ring_alloc_input {
+ uint16_t req_type;
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t queue_id4;
+ uint16_t cmpl_ring;
/*
- * ID of CoS Queue 4. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- uint8_t queue_id4_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t queue_id5;
+ uint64_t resp_addr;
/*
- * ID of CoS Queue 5. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- uint8_t queue_id5_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+ uint32_t enables;
+ /* This bit must be '1' for the Reserved1 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
+ /* This bit must be '1' for the ring_arb_cfg field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG UINT32_C(0x2)
+ /* This bit must be '1' for the Reserved3 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * This bit must be '1' for the stat_ctx_id_valid field to be
+ * configured.
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t queue_id6;
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
+ /* This bit must be '1' for the Reserved4 field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
+ /* This bit must be '1' for the max_bw_valid field to be configured. */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
+ uint8_t ring_type;
+ /* Ring Type. */
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_ALLOC_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t unused_1;
+ uint64_t page_tbl_addr;
+ /* This value is a pointer to the page table for the Ring. */
+ uint32_t fbo;
+ /* First Byte Offset of the first entry in the first page. */
+ uint8_t page_size;
/*
- * ID of CoS Queue 6. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * Actual page size in 2^page_size. The supported range is
+ * increments in powers of 2 from 16 bytes to 1GB. - 4 = 16 B
+ * Page size is 16 B. - 12 = 4 KB Page size is 4 KB. - 13 = 8 KB
+ * Page size is 8 KB. - 16 = 64 KB Page size is 64 KB. - 21 = 2
+ * MB Page size is 2 MB. - 22 = 4 MB Page size is 4 MB. - 30 = 1
+ * GB Page size is 1 GB.
*/
- uint8_t queue_id6_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+ uint8_t page_tbl_depth;
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * This value indicates the depth of page table. For this
+ * version of the specification, value other than 0 or 1 shall
+ * be considered as an invalid value. When the page_tbl_depth =
+ * 0, then it is treated as a special case with the following.
+ * 1. FBO and page size fields are not valid. 2. page_tbl_addr
+ * is the physical address of the first element of the ring.
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t queue_id7;
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint32_t length;
/*
- * ID of CoS Queue 7. FF - Invalid id # This ID can be used on
- * any subsequent call to an hwrm command that takes a queue id.
- * # IDs must always be queried by this command before any use
- * by the driver or software. # Any driver or software should
- * not make any assumptions about queue IDs. # A value of 0xff
- * indicates that the queue is not available. # Available queues
- * may not be in sequential order.
+ * Number of 16B units in the ring. Minimum size for a ring is
+ * 16 16B entries.
*/
- uint8_t queue_id7_service_profile;
- /* This value is applicable to CoS queues only. */
- /* Lossy (best-effort) */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \
- UINT32_C(0x0)
- /* Lossless */
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \
- UINT32_C(0x1)
+ uint16_t logical_id;
+ /*
+ * Logical ring number for the ring to be allocated. This value
+ * determines the position in the doorbell area where the update
+ * to the ring will be made. For completion rings, this value is
+ * also the MSI-X vector number for the function the completion
+ * ring is associated with.
+ */
+ uint16_t cmpl_ring_id;
+ /*
+ * This field is used only when ring_type is a TX ring. This
+ * value indicates what completion ring the TX ring is
+ * associated with.
+ */
+ uint16_t queue_id;
+ /*
+ * This field is used only when ring_type is a TX ring. This
+ * value indicates what CoS queue the TX ring is associated
+ * with.
+ */
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint32_t reserved1;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint16_t ring_arb_cfg;
/*
- * Set to 0xFF... (All Fs) if there is no
- * service profile specified
+ * This field is used only when ring_type is a TX ring. This
+ * field is used to configure arbitration related parameters for
+ * a TX ring.
*/
- #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \
- UINT32_C(0xff)
- uint8_t valid;
+ /* Arbitration policy used for the ring. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK UINT32_C(0xf)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
+ * Use strict priority for the TX ring. Priority
+ * value is specified in arb_policy_param
*/
-} __attribute__((packed));
-
-/* hwrm_vnic_alloc */
-/*
- * Description: This VNIC is a resource in the RX side of the chip that is used
- * to represent a virtual host "interface". # At the time of VNIC allocation or
- * configuration, the function can specify whether it wants the requested VNIC
- * to be the default VNIC for the function or not. # If a function requests
- * allocation of a VNIC for the first time and a VNIC is successfully allocated
- * by the HWRM, then the HWRM shall make the allocated VNIC as the default VNIC
- * for that function. # The default VNIC shall be used for the default action
- * for a partition or function. # For each VNIC allocated on a function, a
- * mapping on the RX side to map the allocated VNIC to source virtual interface
- * shall be performed by the HWRM. This should be hidden to the function driver
- * requesting the VNIC allocation. This enables broadcast/multicast replication
- * with source knockout. # If multicast replication with source knockout is
- * enabled, then the internal VNIC to SVIF mapping data structures shall be
- * programmed at the time of VNIC allocation.
- */
-/* Input (24 bytes) */
-struct hwrm_vnic_alloc_input {
- uint16_t req_type;
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
+ (UINT32_C(0x1) << 0)
/*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
+ * Use weighted fair queue arbitration for the
+ * TX ring. Weight is specified in
+ * arb_policy_param
*/
- uint16_t cmpl_ring;
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
+ (UINT32_C(0x2) << 0)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
+ RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
+ /* Reserved field. */
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK UINT32_C(0xf0)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4
/*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
+ * Arbitration policy specific parameter. # For strict priority
+ * arbitration policy, this field represents a priority value.
+ * If set to 0, then the priority is not specified and the HWRM
+ * is allowed to select any priority for this TX ring. # For
+ * weighted fair queue arbitration policy, this field represents
+ * a weight value. If set to 0, then the weight is not specified
+ * and the HWRM is allowed to select any weight for this TX
+ * ring.
*/
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
+ UINT32_C(0xff00)
+ #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
+ uint8_t unused_6;
+ uint8_t unused_7;
+ uint32_t reserved3;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t stat_ctx_id;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
+ * This field is used only when ring_type is a TX ring. This
+ * input indicates what statistics context this ring should be
+ * associated with.
*/
- uint64_t resp_addr;
+ uint32_t reserved4;
+ /* This field is reserved for the future use. It shall be set to 0. */
+ uint32_t max_bw;
/*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
+ * This field is used only when ring_type is a TX ring to
+ * specify maximum BW allocated to the TX ring. The HWRM will
+ * translate this value into byte counter and time interval used
+ * for this ring inside the device.
*/
- uint32_t flags;
+ /* The bandwidth value. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK UINT32_C(0xfffffff)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
+ /* The granularity of the value (bits or bytes). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE UINT32_C(0x10000000)
+ /* Value is in bits. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BITS (UINT32_C(0x0) << 28)
+ /* Value is in bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES (UINT32_C(0x1) << 28)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_SCALE_LAST \
+ RING_ALLOC_INPUT_MAX_BW_SCALE_BYTES
+ /* bw_value_unit is 3 b */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
+ UINT32_C(0xe0000000)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
+ /* Value is in Mb or MB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MEGA \
+ (UINT32_C(0x0) << 29)
+ /* Value is in Kb or KB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_KILO \
+ (UINT32_C(0x2) << 29)
+ /* Value is in bits or bytes. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_BASE \
+ (UINT32_C(0x4) << 29)
+ /* Value is in Gb or GB (base 10). */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_GIGA \
+ (UINT32_C(0x6) << 29)
+ /* Value is in 1/100th of a percentage of total bandwidth. */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
+ (UINT32_C(0x1) << 29)
+ /* Invalid unit */
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
+ (UINT32_C(0x7) << 29)
+ #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
+ RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
+ uint8_t int_mode;
/*
- * When this bit is '1', this VNIC is requested to be the
- * default VNIC for this function.
+ * This field is used only when ring_type is a Completion ring.
+ * This value indicates what interrupt mode should be used on
+ * this completion ring. Note: In the legacy interrupt mode, no
+ * more than 16 completion rings are allowed.
*/
- #define HWRM_VNIC_ALLOC_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
- uint32_t unused_0;
+ /* Legacy INTA */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
+ /* Reserved */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
+ /* MSI-X */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
+ /* No Interrupt - Polled mode */
+ #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
+ uint8_t unused_8[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_vnic_alloc_output {
+/* Output (16 bytes) */
+struct hwrm_ring_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t vnic_id;
- /* Logical vnic ID */
+ uint16_t ring_id;
+ /*
+ * Physical number of ring allocated. This value shall be unique
+ * for a ring type.
+ */
+ uint16_t logical_ring_id;
+ /* Logical number of ring allocated. */
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
*/
} __attribute__((packed));
-/* hwrm_vnic_free */
+/* hwrm_ring_free */
/*
- * Description: Free a VNIC resource. Idle any resources associated with the
- * VNIC as well as the VNIC. Reset and release all resources associated with the
- * VNIC.
+ * Description: This command is used to free a ring and associated resources.
+ * With QoS and DCBx agents, it is possible the traffic classes will be moved
+ * from one CoS queue to another. When this occurs, the driver shall call
+ * 'hwrm_ring_free' to free the allocated rings and then call 'hwrm_ring_alloc'
+ * to re-allocate each ring and assign it to a new CoS queue. hwrm_ring_free
+ * shall be called on a ring only after it has been idle for 500ms or more and
+ * no frames have been posted to the ring during this time. All frames queued
+ * for transmission shall be completed and at least 500ms time elapsed from the
+ * last completion before calling this command.
*/
-/* Input (24 bytes) */
-struct hwrm_vnic_free_input {
+/* Input (24 bytes) */
+struct hwrm_ring_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t vnic_id;
- /* Logical vnic ID */
- uint32_t unused_0;
+ uint8_t ring_type;
+ /* Ring Type. */
+ /* L2 Completion Ring (CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_L2_CMPL UINT32_C(0x0)
+ /* TX Ring (TR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
+ /* RX Ring (RR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
+ /* RoCE Notification Completion Ring (ROCE_CR) */
+ #define HWRM_RING_FREE_INPUT_RING_TYPE_ROCE_CMPL UINT32_C(0x3)
+ uint8_t unused_0;
+ uint16_t ring_id;
+ /* Physical number of ring allocated. */
+ uint32_t unused_1;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_vnic_free_output {
+/* Output (16 bytes) */
+struct hwrm_ring_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
*/
} __attribute__((packed));
-/* hwrm_vnic_cfg */
-/* Description: Configure the RX VNIC structure. */
-/* Input (40 bytes) */
-struct hwrm_vnic_cfg_input {
+/* hwrm_ring_grp_alloc */
+/*
+ * Description: This API allocates and does basic preparation for a ring group.
+ */
+/* Input (24 bytes) */
+struct hwrm_ring_grp_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
- */
- uint32_t flags;
- /*
- * When this bit is '1', the VNIC is requested to be the default
- * VNIC for the function.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_DEFAULT UINT32_C(0x1)
- /*
- * When this bit is '1', the VNIC is being configured to strip
- * VLAN in the RX path. If set to '0', then VLAN stripping is
- * disabled on this VNIC.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_VLAN_STRIP_MODE UINT32_C(0x2)
- /*
- * When this bit is '1', the VNIC is being configured to buffer
- * receive packets in the hardware until the host posts new
- * receive buffers. If set to '0', then bd_stall is being
- * configured to be disabled on this VNIC.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_BD_STALL_MODE UINT32_C(0x4)
- /*
- * When this bit is '1', the VNIC is being configured to receive
- * both RoCE and non-RoCE traffic. If set to '0', then this VNIC
- * is not configured to be operating in dual VNIC mode.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_DUAL_VNIC_MODE UINT32_C(0x8)
- /*
- * When this flag is set to '1', the VNIC is requested to be
- * configured to receive only RoCE traffic. If this flag is set
- * to '0', then this flag shall be ignored by the HWRM. If
- * roce_dual_vnic_mode flag is set to '1', then the HWRM client
- * shall not set this flag to '1'.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_ROCE_ONLY_VNIC_MODE UINT32_C(0x10)
- /*
- * When a VNIC uses one destination ring group for certain
- * application (e.g. Receive Flow Steering) where exact match is
- * used to direct packets to a VNIC with one destination ring
- * group only, there is no need to configure RSS indirection
- * table for that VNIC as only one destination ring group is
- * used. This flag is used to enable a mode where RSS is enabled
- * in the VNIC using a RSS context for computing RSS hash but
- * the RSS indirection table is not configured using
- * hwrm_vnic_rss_cfg. If this mode is enabled, then the driver
- * should not program RSS indirection table for the RSS context
- * that is used for computing RSS hash only.
- */
- #define HWRM_VNIC_CFG_INPUT_FLAGS_RSS_DFLT_CR_MODE UINT32_C(0x20)
- uint32_t enables;
- /*
- * This bit must be '1' for the dflt_ring_grp field to be
- * configured.
- */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_DFLT_RING_GRP UINT32_C(0x1)
- /* This bit must be '1' for the rss_rule field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_RSS_RULE UINT32_C(0x2)
- /* This bit must be '1' for the cos_rule field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_COS_RULE UINT32_C(0x4)
- /* This bit must be '1' for the lb_rule field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_LB_RULE UINT32_C(0x8)
- /* This bit must be '1' for the mru field to be configured. */
- #define HWRM_VNIC_CFG_INPUT_ENABLES_MRU UINT32_C(0x10)
- uint16_t vnic_id;
- /* Logical vnic ID */
- uint16_t dflt_ring_grp;
+ */
+ uint16_t cmpl_ring;
/*
- * Default Completion ring for the VNIC. This ring will be
- * chosen if packet does not match any RSS rules and if there is
- * no COS rule.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- uint16_t rss_rule;
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * RSS ID for RSS rule/table structure. 0xFF... (All Fs) if
- * there is no RSS rule.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- uint16_t cos_rule;
+ uint64_t resp_addr;
/*
- * RSS ID for COS rule/table structure. 0xFF... (All Fs) if
- * there is no COS rule.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- uint16_t lb_rule;
+ uint16_t cr;
+ /* This value identifies the CR associated with the ring group. */
+ uint16_t rr;
+ /* This value identifies the main RR associated with the ring group. */
+ uint16_t ar;
/*
- * RSS ID for load balancing rule/table structure. 0xFF... (All
- * Fs) if there is no LB rule.
+ * This value identifies the aggregation RR associated with the
+ * ring group. If this value is 0xFF... (All Fs), then no
+ * Aggregation ring will be set.
*/
- uint16_t mru;
+ uint16_t sc;
/*
- * The maximum receive unit of the vnic. Each vnic is associated
- * with a function. The vnic mru value overwrites the mru
- * setting of the associated function. The HWRM shall make sure
- * that vnic mru does not exceed the mru of the port the
- * function is associated with.
+ * This value identifies the statistics context associated with
+ * the ring group.
*/
- uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_vnic_cfg_output {
+/* Output (16 bytes) */
+struct hwrm_ring_grp_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t unused_0;
+ uint32_t ring_group_id;
+ /*
+ * This is the ring group ID value. Use this value to program
+ * the default ring group for the VNIC or as table entries in an
+ * RSS/COS context.
+ */
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_vnic_rss_cfg */
-/* Description: This function is used to enable RSS configuration. */
-/* Input (48 bytes) */
-struct hwrm_vnic_rss_cfg_input {
+/* hwrm_ring_grp_free */
+/*
+ * Description: This API frees a ring group and associated resources. # If a
+ * ring in the ring group is reset or free, then the associated rings in the
+ * ring group shall also be reset/free using hwrm_ring_free. # A function driver
+ * shall always use hwrm_ring_grp_free after freeing all rings in a group. # As
+ * a part of executing this command, the HWRM shall reset all associated ring
+ * group resources.
+ */
+/* Input (24 bytes) */
+struct hwrm_ring_grp_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t hash_type;
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source and destination IPv4 addresses of IPv4 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV4 UINT32_C(0x1)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv4 addresses and source/destination
- * ports of TCP/IPv4 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV4 UINT32_C(0x2)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv4 addresses and source/destination
- * ports of UDP/IPv4 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV4 UINT32_C(0x4)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source and destination IPv4 addresses of IPv6 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_IPV6 UINT32_C(0x8)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv6 addresses and source/destination
- * ports of TCP/IPv6 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_TCP_IPV6 UINT32_C(0x10)
- /*
- * When this bit is '1', the RSS hash shall be computed over
- * source/destination IPv6 addresses and source/destination
- * ports of UDP/IPv6 packets.
- */
- #define HWRM_VNIC_RSS_CFG_INPUT_HASH_TYPE_UDP_IPV6 UINT32_C(0x20)
+ uint32_t ring_group_id;
+ /* This is the ring group ID value. */
uint32_t unused_0;
- uint64_t ring_grp_tbl_addr;
- /* This is the address for rss ring group table */
- uint64_t hash_key_tbl_addr;
- /* This is the address for rss hash key table */
- uint16_t rss_ctx_idx;
- /* Index to the rss indirection table. */
- uint16_t unused_1[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_vnic_rss_cfg_output {
+/* Output (16 bytes) */
+struct hwrm_ring_grp_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
*/
} __attribute__((packed));
-/* hwrm_vnic_rss_cos_lb_ctx_alloc */
-/* Description: This function is used to allocate COS/Load Balance context. */
-/* Input (16 bytes) */
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_input {
+/* hwrm_cfa_l2_filter_alloc */
+/*
+ * Description: An L2 filter is a filter resource that is used to identify a
+ * vnic or ring for a packet based on layer 2 fields. Layer 2 fields for
+ * encapsulated packets include both outer L2 header and/or inner l2 header of
+ * encapsulated packet. The L2 filter resource covers the following OS specific
+ * L2 filters. Linux/FreeBSD (per function): # Broadcast enable/disable # List
+ * of individual multicast filters # All multicast enable/disable filter #
+ * Unicast filters # Promiscuous mode VMware: # Broadcast enable/disable (per
+ * physical function) # All multicast enable/disable (per function) # Unicast
+ * filters per ring or vnic # Promiscuous mode per PF Windows: # Broadcast
+ * enable/disable (per physical function) # List of individual multicast filters
+ * (Driver needs to advertise the maximum number of filters supported) # All
+ * multicast enable/disable per physical function # Unicast filters per vnic #
+ * Promiscuous mode per PF Implementation notes on the use of VNIC in this
+ * command: # By default, these filters belong to default vnic for the function.
+ * # Once these filters are set up, only destination VNIC can be modified. # If
+ * the destination VNIC is not specified in this command, then the HWRM shall
+ * only create an l2 context id. HWRM Implementation notes for multicast
+ * filters: # The hwrm_filter_alloc command can be used to set up multicast
+ * filters (perfect match or partial match). Each individual function driver can
+ * set up multicast filters independently. # The HWRM needs to keep track of
+ * multicast filters set up by function drivers and maintain multicast group
+ * replication records to enable a subset of functions to receive traffic for a
+ * specific multicast address. # When a specific multicast filter cannot be set,
+ * the HWRM shall return an error. In this error case, the driver should fall
+ * back to using one general filter (rather than specific) for all multicast
+ * traffic. # When the SR-IOV is enabled, the HWRM needs to additionally track
+ * source knockout per multicast group record. Examples of setting unicast
+ * filters: For a unicast MAC based filter, one can use a combination of the
+ * fields and masks provided in this command to set up the filter. Below are
+ * some examples: # MAC + no VLAN filter: This filter is used to identify
+ * traffic that does not contain any VLAN tags and matches destination (or
+ * source) MAC address. This filter can be set up by setting only l2_addr field
+ * to be a valid field. All other fields are not valid. The following value is
+ * set for l2_addr. l2_addr = MAC # MAC + Any VLAN filter: This filter is used
+ * to identify traffic that carries single VLAN tag and matches (destination or
+ * source) MAC address. This filter can be set up by setting only l2_addr and
+ * l2_ovlan_mask fields to be valid fields. All other fields are not valid. The
+ * following values are set for those two valid fields. l2_addr = MAC,
+ * l2_ovlan_mask = 0xFFFF # MAC + no VLAN or VLAN ID=0: This filter is used to
+ * identify untagged traffic that does not contain any VLAN tags or a VLAN tag
+ * with VLAN ID = 0 and matches destination (or source) MAC address. This filter
+ * can be set up by setting only l2_addr and l2_ovlan fields to be valid fields.
+ * All other fields are not valid. The following value are set for l2_addr and
+ * l2_ovlan. l2_addr = MAC, l2_ovlan = 0x0 # MAC + no VLAN or any VLAN: This
+ * filter is used to identify traffic that contains zero or 1 VLAN tag and
+ * matches destination (or source) MAC address. This filter can be set up by
+ * setting only l2_addr, l2_ovlan, and l2_mask fields to be valid fields. All
+ * other fields are not valid. The following value are set for l2_addr,
+ * l2_ovlan, and l2_mask fields. l2_addr = MAC, l2_ovlan = 0x0, l2_ovlan_mask =
+ * 0xFFFF # MAC + VLAN ID filter: This filter can be set up by setting only
+ * l2_addr, l2_ovlan, and l2_ovlan_mask fields to be valid fields. All other
+ * fields are not valid. The following values are set for those three valid
+ * fields. l2_addr = MAC, l2_ovlan = VLAN ID, l2_ovlan_mask = 0xF000
+ */
+/* Input (96 bytes) */
+struct hwrm_cfa_l2_filter_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
-} __attribute__((packed));
-
-/* Output (16 bytes) */
-struct hwrm_vnic_rss_cos_lb_ctx_alloc_output {
- uint16_t error_code;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX \
+ (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX \
+ (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
+ CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates the applicability to the
+ * loopback path.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2)
+ /*
+ * Setting of this flag indicates drop action. If this flag is
+ * not set, then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4)
+ /*
+ * If this flag is set, all t_l2_* fields are invalid and they
+ * should not be specified. If this flag is set, then l2_*
+ * fields refer to fields of outermost L2 header.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
+ uint32_t enables;
+ /* This bit must be '1' for the l2_addr field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
+ /* This bit must be '1' for the l2_addr_mask field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK \
+ UINT32_C(0x2)
+ /* This bit must be '1' for the l2_ovlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK \
+ UINT32_C(0x8)
+ /* This bit must be '1' for the l2_ivlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK \
+ UINT32_C(0x20)
+ /* This bit must be '1' for the t_l2_addr field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the t_l2_addr_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK \
+ UINT32_C(0x80)
+ /* This bit must be '1' for the t_l2_ovlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the t_l2_ovlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK \
+ UINT32_C(0x200)
+ /* This bit must be '1' for the t_l2_ivlan field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the t_l2_ivlan_mask field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK \
+ UINT32_C(0x800)
+ /* This bit must be '1' for the src_type field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000)
+ /* This bit must be '1' for the src_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
+ /* This bit must be '1' for the tunnel_type field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE \
+ UINT32_C(0x4000)
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
+ /*
+ * This bit must be '1' for the mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID \
+ UINT32_C(0x10000)
+ uint8_t l2_addr[6];
+ /*
+ * This value sets the match value for the L2 MAC address.
+ * Destination MAC address for RX path. Source MAC address for
+ * TX path.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t l2_addr_mask[6];
+ /*
+ * This value sets the mask value for the L2 address. A value of
+ * 0 will mask the corresponding bit from compare.
+ */
+ uint16_t l2_ovlan;
+ /* This value sets VLAN ID value for outer VLAN. */
+ uint16_t l2_ovlan_mask;
+ /*
+ * This value sets the mask value for the ovlan id. A value of 0
+ * will mask the corresponding bit from compare.
+ */
+ uint16_t l2_ivlan;
+ /* This value sets VLAN ID value for inner VLAN. */
+ uint16_t l2_ivlan_mask;
+ /*
+ * This value sets the mask value for the ivlan id. A value of 0
+ * will mask the corresponding bit from compare.
+ */
+ uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t t_l2_addr[6];
+ /*
+ * This value sets the match value for the tunnel L2 MAC
+ * address. Destination MAC address for RX path. Source MAC
+ * address for TX path.
+ */
+ uint8_t unused_4;
+ uint8_t unused_5;
+ uint8_t t_l2_addr_mask[6];
+ /*
+ * This value sets the mask value for the tunnel L2 address. A
+ * value of 0 will mask the corresponding bit from compare.
+ */
+ uint16_t t_l2_ovlan;
+ /* This value sets VLAN ID value for tunnel outer VLAN. */
+ uint16_t t_l2_ovlan_mask;
+ /*
+ * This value sets the mask value for the tunnel ovlan id. A
+ * value of 0 will mask the corresponding bit from compare.
+ */
+ uint16_t t_l2_ivlan;
+ /* This value sets VLAN ID value for tunnel inner VLAN. */
+ uint16_t t_l2_ivlan_mask;
+ /*
+ * This value sets the mask value for the tunnel ivlan id. A
+ * value of 0 will mask the corresponding bit from compare.
+ */
+ uint8_t src_type;
+ /* This value identifies the type of source of the packet. */
+ /* Network port */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
+ /* Physical function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
+ /* Virtual function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
+ /* Virtual NIC of a function */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
+ /* Embedded processor for CFA management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
+ /* Embedded processor for OOB management */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
+ /* Embedded processor for RoCE */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
+ /* Embedded processor for network proxy functions */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
+ uint8_t unused_6;
+ uint32_t src_id;
/*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
+ * This value is the id of the source. For a network port, it
+ * represents port_id. For a physical function, it represents
+ * fid. For a virtual function, it represents vf_id. For a vnic,
+ * it represents vnic_id. For embedded processors, this id is
+ * not valid. Notes: 1. The function ID is implied if it src_id
+ * is not provided for a src_type that is either
*/
- uint16_t req_type;
- /* This field returns the type of original request. */
- uint16_t seq_id;
- /* This field provides original sequence number of the command. */
- uint16_t resp_len;
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Non-tunnel */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL \
+ UINT32_C(0x0)
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
/*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
+ * Network Virtualization Generic Routing
+ * Encapsulation (NVGRE)
*/
- uint16_t rss_cos_lb_ctx_id;
- /* rss_cos_lb_ctx_id is 16 b */
- uint8_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
- uint8_t unused_4;
- uint8_t valid;
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE \
+ UINT32_C(0x2)
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
+ * Generic Routing Encapsulation (GRE) inside
+ * Ethernet payload
*/
-} __attribute__((packed));
-
-/* hwrm_vnic_rss_cos_lb_ctx_free */
-/* Description: This function can be used to free COS/Load Balance context. */
-/* Input (24 bytes) */
-struct hwrm_vnic_rss_cos_lb_ctx_free_input {
- uint16_t req_type;
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
+ /* IP in IP */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ /* Multi-Protocol Lable Switching (MPLS) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
/*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
+ * Generic Routing Encapsulation (GRE) inside IP
+ * datagram payload
*/
- uint16_t cmpl_ring;
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL \
+ UINT32_C(0xff)
+ uint8_t unused_7;
+ uint16_t dst_id;
/*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
*/
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
+ uint16_t mirror_vnic_id;
+ /* Logical VNIC ID of the VNIC where traffic is mirrored. */
+ uint8_t pri_hint;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
+ * This hint is provided to help in placing the filter in the
+ * filter table.
*/
- uint64_t resp_addr;
+ /* No preference */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER \
+ UINT32_C(0x0)
+ /* Above the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER \
+ UINT32_C(0x1)
+ /* Below the given filter */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER \
+ UINT32_C(0x2)
+ /* As high as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3)
+ /* As low as possible */
+ #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN UINT32_C(0x4)
+ uint8_t unused_8;
+ uint32_t unused_9;
+ uint64_t l2_filter_id_hint;
/*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
+ * This is the ID of the filter that goes along with the
+ * pri_hint. This field is valid only for the following values.
+ * 1 - Above the given filter 2 - Below the given filter
*/
- uint16_t rss_cos_lb_ctx_id;
- /* rss_cos_lb_ctx_id is 16 b */
- uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_vnic_rss_cos_lb_ctx_free_output {
+/* Output (24 bytes) */
+struct hwrm_cfa_l2_filter_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t unused_0;
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
+ */
+ uint32_t flow_id;
+ /*
+ * This is the ID of the flow associated with this filter. This
+ * value shall be used to match and associate the flow
+ * identifier returned in completion records. A value of
+ * 0xFFFFFFFF shall indicate no flow id.
+ */
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_ring_alloc */
+/* hwrm_cfa_l2_filter_free */
/*
- * Description: This command allocates and does basic preparation for a ring.
- */
-/* Input (80 bytes) */
-struct hwrm_ring_alloc_input {
- uint16_t req_type;
- /*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
- */
- uint16_t cmpl_ring;
- /*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
- */
- uint16_t seq_id;
- /* This value indicates the command sequence number. */
- uint16_t target_id;
- /*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
- */
- uint64_t resp_addr;
- /*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
- */
- uint32_t enables;
- /* This bit must be '1' for the Reserved1 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED1 UINT32_C(0x1)
- /* This bit must be '1' for the ring_arb_cfg field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RING_ARB_CFG UINT32_C(0x2)
- /* This bit must be '1' for the Reserved3 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED3 UINT32_C(0x4)
- /*
- * This bit must be '1' for the stat_ctx_id_valid field to be
- * configured.
- */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_STAT_CTX_ID_VALID UINT32_C(0x8)
- /* This bit must be '1' for the Reserved4 field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_RESERVED4 UINT32_C(0x10)
- /* This bit must be '1' for the max_bw_valid field to be configured. */
- #define HWRM_RING_ALLOC_INPUT_ENABLES_MAX_BW_VALID UINT32_C(0x20)
- uint8_t ring_type;
- /* Ring Type. */
- /* Completion Ring (CR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
- #define HWRM_RING_ALLOC_INPUT_RING_TYPE_RX UINT32_C(0x2)
- uint8_t unused_0;
- uint16_t unused_1;
- uint64_t page_tbl_addr;
- /* This value is a pointer to the page table for the Ring. */
- uint32_t fbo;
- /* First Byte Offset of the first entry in the first page. */
- uint8_t page_size;
- /*
- * Actual page size in 2^page_size. The supported range is
- * increments in powers of 2 from 16 bytes to 1GB. - 4 = 16 B
- * Page size is 16 B. - 12 = 4 KB Page size is 4 KB. - 13 = 8 KB
- * Page size is 8 KB. - 16 = 64 KB Page size is 64 KB. - 21 = 2
- * MB Page size is 2 MB. - 22 = 4 MB Page size is 4 MB. - 30 = 1
- * GB Page size is 1 GB.
- */
- uint8_t page_tbl_depth;
- /*
- * This value indicates the depth of page table. For this
- * version of the specification, value other than 0 or 1 shall
- * be considered as an invalid value. When the page_tbl_depth =
- * 0, then it is treated as a special case with the following.
- * 1. FBO and page size fields are not valid. 2. page_tbl_addr
- * is the physical address of the first element of the ring.
- */
- uint8_t unused_2;
- uint8_t unused_3;
- uint32_t length;
- /*
- * Number of 16B units in the ring. Minimum size for a ring is
- * 16 16B entries.
- */
- uint16_t logical_id;
- /*
- * Logical ring number for the ring to be allocated. This value
- * determines the position in the doorbell area where the update
- * to the ring will be made. For completion rings, this value is
- * also the MSI-X vector number for the function the completion
- * ring is associated with.
- */
- uint16_t cmpl_ring_id;
- /*
- * This field is used only when ring_type is a TX ring. This
- * value indicates what completion ring the TX ring is
- * associated with.
- */
- uint16_t queue_id;
- /*
- * This field is used only when ring_type is a TX ring. This
- * value indicates what CoS queue the TX ring is associated
- * with.
- */
- uint8_t unused_4;
- uint8_t unused_5;
- uint32_t reserved1;
- /* This field is reserved for the future use. It shall be set to 0. */
- uint16_t ring_arb_cfg;
- /*
- * This field is used only when ring_type is a TX ring. This
- * field is used to configure arbitration related parameters for
- * a TX ring.
- */
- /* Arbitration policy used for the ring. */
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_MASK \
- UINT32_C(0xf)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SFT 0
- /*
- * Use strict priority for the TX ring. Priority
- * value is specified in arb_policy_param
- */
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_SP \
- (UINT32_C(0x1) << 0)
+ * Description: Free a L2 filter. The HWRM shall free all associated filter
+ * resources with the L2 filter.
+ */
+/* Input (24 bytes) */
+struct hwrm_cfa_l2_filter_free_input {
+ uint16_t req_type;
/*
- * Use weighted fair queue arbitration for the
- * TX ring. Weight is specified in
- * arb_policy_param
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ \
- (UINT32_C(0x2) << 0)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_LAST \
- RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_WFQ
- /* Reserved field. */
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_MASK UINT32_C(0xf0)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_RSVD_SFT 4
+ uint16_t cmpl_ring;
/*
- * Arbitration policy specific parameter. # For strict priority
- * arbitration policy, this field represents a priority value.
- * If set to 0, then the priority is not specified and the HWRM
- * is allowed to select any priority for this TX ring. # For
- * weighted fair queue arbitration policy, this field represents
- * a weight value. If set to 0, then the weight is not specified
- * and the HWRM is allowed to select any weight for this TX
- * ring.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_MASK \
- UINT32_C(0xff00)
- #define HWRM_RING_ALLOC_INPUT_RING_ARB_CFG_ARB_POLICY_PARAM_SFT 8
- uint8_t unused_6;
- uint8_t unused_7;
- uint32_t reserved3;
- /* This field is reserved for the future use. It shall be set to 0. */
- uint32_t stat_ctx_id;
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * This field is used only when ring_type is a TX ring. This
- * input indicates what statistics context this ring should be
- * associated with.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- uint32_t reserved4;
- /* This field is reserved for the future use. It shall be set to 0. */
- uint32_t max_bw;
+ uint64_t resp_addr;
/*
- * This field is used only when ring_type is a TX ring to
- * specify maximum BW allocated to the TX ring. The HWRM will
- * translate this value into byte counter and time interval used
- * for this ring inside the device.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- /* Bandwidth value */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_MASK \
- UINT32_C(0xfffffff)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_SFT 0
- /* Reserved */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_RSVD UINT32_C(0x10000000)
- /* bw_value_unit is 3 b */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MASK \
- UINT32_C(0xe0000000)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_SFT 29
- /* Value is in Mbps */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_MBPS \
- (UINT32_C(0x0) << 29)
- /* Value is in 1/100th of a percentage of total bandwidth. */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_PERCENT1_100 \
- (UINT32_C(0x1) << 29)
- /* Invalid unit */
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID \
- (UINT32_C(0x7) << 29)
- #define HWRM_RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_LAST \
- RING_ALLOC_INPUT_MAX_BW_BW_VALUE_UNIT_INVALID
- uint8_t int_mode;
+ uint64_t l2_filter_id;
/*
- * This field is used only when ring_type is a Completion ring.
- * This value indicates what interrupt mode should be used on
- * this completion ring. Note: In the legacy interrupt mode, no
- * more than 16 completion rings are allowed.
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
*/
- /* Legacy INTA */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_LEGACY UINT32_C(0x0)
- /* Reserved */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_RSVD UINT32_C(0x1)
- /* MSI-X */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_MSIX UINT32_C(0x2)
- /* No Interrupt - Polled mode */
- #define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
- uint8_t unused_8[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_ring_alloc_output {
+/* Output (16 bytes) */
+struct hwrm_cfa_l2_filter_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint16_t ring_id;
- /*
- * Physical number of ring allocated. This value shall be unique
- * for a ring type.
- */
- uint16_t logical_ring_id;
- /* Logical number of ring allocated. */
- uint8_t unused_0;
+ uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_ring_free */
-/*
- * Description: This command is used to free a ring and associated resources.
- */
-/* Input (24 bytes) */
-struct hwrm_ring_free_input {
+/* hwrm_cfa_l2_filter_cfg */
+/* Description: Change the configuration of an existing L2 filter */
+/* Input (40 bytes) */
+struct hwrm_cfa_l2_filter_cfg_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint8_t ring_type;
- /* Ring Type. */
- /* Completion Ring (CR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_CMPL UINT32_C(0x0)
- /* TX Ring (TR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_TX UINT32_C(0x1)
- /* RX Ring (RR) */
- #define HWRM_RING_FREE_INPUT_RING_TYPE_RX UINT32_C(0x2)
- uint8_t unused_0;
- uint16_t ring_id;
- /* Physical number of ring allocated. */
- uint32_t unused_1;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource. This
+ * enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* tx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX \
+ (UINT32_C(0x0) << 0)
+ /* rx path */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX \
+ (UINT32_C(0x1) << 0)
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
+ CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
+ /*
+ * Setting of this flag indicates drop action. If this flag is
+ * not set, then it should be considered accept action.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2)
+ uint32_t enables;
+ /* This bit must be '1' for the dst_id field to be configured. */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the new_mirror_vnic_id field to be
+ * configured.
+ */
+ #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID \
+ UINT32_C(0x2)
+ uint64_t l2_filter_id;
+ /*
+ * This value identifies a set of CFA data structures used for
+ * an L2 context.
+ */
+ uint32_t dst_id;
+ /*
+ * If set, this value shall represent the Logical VNIC ID of the
+ * destination VNIC for the RX path and network port id of the
+ * destination port for the TX path.
+ */
+ uint32_t new_mirror_vnic_id;
+ /* New Logical VNIC ID of the VNIC where traffic is mirrored. */
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_ring_free_output {
+/* Output (16 bytes) */
+struct hwrm_cfa_l2_filter_cfg_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
*/
} __attribute__((packed));
-/* hwrm_ring_grp_alloc */
-/*
- * Description: This API allocates and does basic preparation for a ring group.
- */
-/* Input (24 bytes) */
-struct hwrm_ring_grp_alloc_input {
+/* hwrm_cfa_l2_set_rx_mask */
+/* Description: This command will set rx mask of the function. */
+/* Input (56 bytes) */
+struct hwrm_cfa_l2_set_rx_mask_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint16_t cr;
- /* This value identifies the CR associated with the ring group. */
- uint16_t rr;
- /* This value identifies the main RR associated with the ring group. */
- uint16_t ar;
+ uint32_t vnic_id;
+ /* VNIC ID */
+ uint32_t mask;
+ /* Reserved for future use. */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
/*
- * This value identifies the aggregation RR associated with the
- * ring group. If this value is 0xFF... (All Fs), then no
- * Aggregation ring will be set.
+ * When this bit is '1', the function is requested to accept
+ * multi-cast packets specified by the multicast addr table.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
+ /*
+ * When this bit is '1', the function is requested to accept all
+ * multi-cast packets.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
+ /*
+ * When this bit is '1', the function is requested to accept
+ * broadcast packets.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
+ /*
+ * When this bit is '1', the function is requested to be put in
+ * the promiscuous mode. The HWRM should accept any function to
+ * set up promiscuous mode. The HWRM shall follow the semantics
+ * below for the promiscuous mode support. # When partitioning
+ * is not enabled on a port (i.e. single PF on the port), then
+ * the PF shall be allowed to be in the promiscuous mode. When
+ * the PF is in the promiscuous mode, then it shall receive all
+ * host bound traffic on that port. # When partitioning is
+ * enabled on a port (i.e. multiple PFs per port) and a PF on
+ * that port is in the promiscuous mode, then the PF receives
+ * all traffic within that partition as identified by a unique
+ * identifier for the PF (e.g. S-Tag). If a unique outer VLAN
+ * for the PF is specified, then the setting of promiscuous mode
+ * on that PF shall result in the PF receiving all host bound
+ * traffic with matching outer VLAN. # A VF shall can be set in
+ * the promiscuous mode. In the promiscuous mode, the VF does
+ * not receive any traffic unless a unique outer VLAN for the VF
+ * is specified. If a unique outer VLAN for the VF is specified,
+ * then the setting of promiscuous mode on that VF shall result
+ * in the VF receiving all host bound traffic with the matching
+ * outer VLAN. # The HWRM shall allow the setting of promiscuous
+ * mode on a function independently from the promiscuous mode
+ * settings on other functions.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for the outermost
+ * Layer 2 destination MAC address field.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for the VLAN-
+ * tagged packets that match the TPID and VID fields of VLAN
+ * tags in the VLAN tag table specified in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for non-VLAN
+ * tagged packets and VLAN-tagged packets that match the TPID
+ * and VID fields of VLAN tags in the VLAN tag table specified
+ * in this command.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80)
+ /*
+ * If this flag is set, the corresponding RX filters shall be
+ * set up to cover multicast/broadcast filters for non-VLAN
+ * tagged packets and VLAN-tagged packets matching any VLAN tag.
+ * If this flag is set, then the HWRM shall ignore VLAN tags
+ * specified in vlan_tag_tbl. If none of vlanonly, vlan_nonvlan,
+ * and anyvlan_nonvlan flags is set, then the HWRM shall ignore
+ * VLAN tags specified in vlan_tag_tbl. The HWRM client shall
+ * set at most one flag out of vlanonly, vlan_nonvlan, and
+ * anyvlan_nonvlan.
+ */
+ #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN \
+ UINT32_C(0x100)
+ uint64_t mc_tbl_addr;
+ /* This is the address for mcast address tbl. */
+ uint32_t num_mc_entries;
+ /*
+ * This value indicates how many entries in mc_tbl are valid.
+ * Each entry is 6 bytes.
+ */
+ uint32_t unused_0;
+ uint64_t vlan_tag_tbl_addr;
+ /*
+ * This is the address for VLAN tag table. Each VLAN entry in
+ * the table is 4 bytes of a VLAN tag including TPID, PCP, DEI,
+ * and VID fields in network byte order.
*/
- uint16_t sc;
+ uint32_t num_vlan_tags;
/*
- * This value identifies the statistics context associated with
- * the ring group.
+ * This value indicates how many entries in vlan_tag_tbl are
+ * valid. Each entry is 4 bytes.
*/
+ uint32_t unused_1;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_ring_grp_alloc_output {
+/* Output (16 bytes) */
+struct hwrm_cfa_l2_set_rx_mask_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t ring_group_id;
- /*
- * This is the ring group ID value. Use this value to program
- * the default ring group for the VNIC or as table entries in an
- * RSS/COS context.
- */
- uint8_t unused_0;
+ uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_ring_grp_free */
-/*
- * Description: This API frees a ring group and associated resources. # If a
- * ring in the ring group is reset or free, then the associated rings in the
- * ring group shall also be reset/free using hwrm_ring_free. # A function driver
- * shall always use hwrm_ring_grp_free after freeing all rings in a group. # As
- * a part of executing this command, the HWRM shall reset all associated ring
- * group resources.
- */
-/* Input (24 bytes) */
-struct hwrm_ring_grp_free_input {
+/* hwrm_cfa_vlan_antispoof_cfg */
+/* Description: Configures vlan anti-spoof filters for VF. */
+/* Input (32 bytes) */
+struct hwrm_cfa_vlan_antispoof_cfg_input {
uint16_t req_type;
/*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
- uint32_t ring_group_id;
- /* This is the ring group ID value. */
- uint32_t unused_0;
-} __attribute__((packed));
+ uint16_t fid;
+ /*
+ * Function ID of the function that is being configured. Only valid for
+ * a VF FID configured by the PF.
+ */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint32_t num_vlan_entries;
+ /* Number of VLAN entries in the vlan_tag_mask_tbl. */
+ uint64_t vlan_tag_mask_tbl_addr;
+ /*
+ * The vlan_tag_mask_tbl_addr is the DMA address of the VLAN antispoof
+ * table. Each table entry contains the 16-bit TPID (0x8100 or 0x88a8
+ * only), 16-bit VLAN ID, and a 16-bit mask, all in network order to
+ * match hwrm_cfa_l2_set_rx_mask. For an individual VLAN entry, the mask
+ * value should be 0xfff for the 12-bit VLAN ID.
+ */
+};
/* Output (16 bytes) */
-struct hwrm_ring_grp_free_output {
+struct hwrm_cfa_vlan_antispoof_cfg_output {
uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
*/
uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_3;
uint8_t valid;
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
*/
-} __attribute__((packed));
+};
-/* hwrm_cfa_l2_filter_alloc */
+/* hwrm_tunnel_dst_port_query */
/*
- * A filter is used to identify traffic that contains a matching set of
- * parameters like unicast or broadcast MAC address or a VLAN tag amongst
- * other things which then allows the ASIC to direct the incoming traffic
- * to an appropriate VNIC or Rx ring.
+ * Description: This function is called by a driver to query tunnel type
+ * specific destination port configuration.
*/
-/* Input (96 bytes) */
-struct hwrm_cfa_l2_filter_alloc_input {
+/* Input (24 bytes) */
+struct hwrm_tunnel_dst_port_query_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
- /*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
- /* rx path */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_LAST \
- CFA_L2_FILTER_ALLOC_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates the applicability to the
- * loopback path.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_LOOPBACK UINT32_C(0x2)
- /*
- * Setting of this flag indicates drop action. If this flag is
- * not set, then it should be considered accept action.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_DROP UINT32_C(0x4)
- /*
- * If this flag is set, all t_l2_* fields are invalid and they
- * should not be specified. If this flag is set, then l2_*
- * fields refer to fields of outermost L2 header.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_FLAGS_OUTERMOST UINT32_C(0x8)
- uint32_t enables;
- /* This bit must be '1' for the l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR UINT32_C(0x1)
- /* This bit must be '1' for the l2_addr_mask field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_ADDR_MASK UINT32_C(0x2)
- /* This bit must be '1' for the l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN UINT32_C(0x4)
- /*
- * This bit must be '1' for the l2_ovlan_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_OVLAN_MASK UINT32_C(0x8)
- /* This bit must be '1' for the l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN UINT32_C(0x10)
- /*
- * This bit must be '1' for the l2_ivlan_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_L2_IVLAN_MASK UINT32_C(0x20)
- /* This bit must be '1' for the t_l2_addr field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR UINT32_C(0x40)
- /*
- * This bit must be '1' for the t_l2_addr_mask field to be
- * configured.
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_ADDR_MASK UINT32_C(0x80)
- /* This bit must be '1' for the t_l2_ovlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN UINT32_C(0x100)
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ uint8_t unused_0[7];
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_tunnel_dst_port_query_output {
+ uint16_t error_code;
/*
- * This bit must be '1' for the t_l2_ovlan_mask field to be
- * configured.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_OVLAN_MASK UINT32_C(0x200)
- /* This bit must be '1' for the t_l2_ivlan field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN UINT32_C(0x400)
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * This bit must be '1' for the t_l2_ivlan_mask field to be
- * configured.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_T_L2_IVLAN_MASK UINT32_C(0x800)
- /* This bit must be '1' for the src_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_TYPE UINT32_C(0x1000)
- /* This bit must be '1' for the src_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_SRC_ID UINT32_C(0x2000)
- /* This bit must be '1' for the tunnel_type field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_TUNNEL_TYPE UINT32_C(0x4000)
- /* This bit must be '1' for the dst_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_DST_ID UINT32_C(0x8000)
+ uint16_t tunnel_dst_port_id;
/*
- * This bit must be '1' for the mirror_vnic_id field to be
- * configured.
+ * This field represents the identifier of L4 destination port
+ * used for the given tunnel type. This field is valid for
+ * specific tunnel types that use layer 4 (e.g. UDP) transports
+ * for tunneling.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_ENABLES_MIRROR_VNIC_ID UINT32_C(0x10000)
- uint8_t l2_addr[6];
+ uint16_t tunnel_dst_port_val;
/*
- * This value sets the match value for the L2 MAC address.
- * Destination MAC address for RX path. Source MAC address for
- * TX path.
+ * This field represents the value of L4 destination port
+ * identified by tunnel_dst_port_id. This field is valid for
+ * specific tunnel types that use layer 4 (e.g. UDP) transports
+ * for tunneling. This field is in network byte order. A value
+ * of 0 means that the destination port is not configured.
*/
uint8_t unused_0;
uint8_t unused_1;
- uint8_t l2_addr_mask[6];
- /*
- * This value sets the mask value for the L2 address. A value of
- * 0 will mask the corresponding bit from compare.
- */
- uint16_t l2_ovlan;
- /* This value sets VLAN ID value for outer VLAN. */
- uint16_t l2_ovlan_mask;
- /*
- * This value sets the mask value for the ovlan id. A value of 0
- * will mask the corresponding bit from compare.
- */
- uint16_t l2_ivlan;
- /* This value sets VLAN ID value for inner VLAN. */
- uint16_t l2_ivlan_mask;
- /*
- * This value sets the mask value for the ivlan id. A value of 0
- * will mask the corresponding bit from compare.
- */
uint8_t unused_2;
- uint8_t unused_3;
- uint8_t t_l2_addr[6];
- /*
- * This value sets the match value for the tunnel L2 MAC
- * address. Destination MAC address for RX path. Source MAC
- * address for TX path.
- */
- uint8_t unused_4;
- uint8_t unused_5;
- uint8_t t_l2_addr_mask[6];
- /*
- * This value sets the mask value for the tunnel L2 address. A
- * value of 0 will mask the corresponding bit from compare.
- */
- uint16_t t_l2_ovlan;
- /* This value sets VLAN ID value for tunnel outer VLAN. */
- uint16_t t_l2_ovlan_mask;
- /*
- * This value sets the mask value for the tunnel ovlan id. A
- * value of 0 will mask the corresponding bit from compare.
- */
- uint16_t t_l2_ivlan;
- /* This value sets VLAN ID value for tunnel inner VLAN. */
- uint16_t t_l2_ivlan_mask;
- /*
- * This value sets the mask value for the tunnel ivlan id. A
- * value of 0 will mask the corresponding bit from compare.
- */
- uint8_t src_type;
- /* This value identifies the type of source of the packet. */
- /* Network port */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_NPORT UINT32_C(0x0)
- /* Physical function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_PF UINT32_C(0x1)
- /* Virtual function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VF UINT32_C(0x2)
- /* Virtual NIC of a function */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_VNIC UINT32_C(0x3)
- /* Embedded processor for CFA management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_KONG UINT32_C(0x4)
- /* Embedded processor for OOB management */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_APE UINT32_C(0x5)
- /* Embedded processor for RoCE */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_BONO UINT32_C(0x6)
- /* Embedded processor for network proxy functions */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_SRC_TYPE_TANG UINT32_C(0x7)
- uint8_t unused_6;
- uint32_t src_id;
- /*
- * This value is the id of the source. For a network port, it
- * represents port_id. For a physical function, it represents
- * fid. For a virtual function, it represents vf_id. For a vnic,
- * it represents vnic_id. For embedded processors, this id is
- * not valid. Notes: 1. The function ID is implied if it src_id
- * is not provided for a src_type that is either
- */
- uint8_t tunnel_type;
- /* Tunnel Type. */
- /* Non-tunnel */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NONTUNNEL UINT32_C(0x0)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ uint8_t valid;
/*
- * Network Virtualization Generic Routing
- * Encapsulation (NVGRE)
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_NVGRE UINT32_C(0x2)
+} __attribute__((packed));
+
+/* hwrm_tunnel_dst_port_alloc */
+/*
+ * Description: This function is called by a driver to allocate l4 destination
+ * port for a specific tunnel type. The destination port value is provided in
+ * the input. If the HWRM supports only one global destination port for a tunnel
+ * type, then the HWRM shall keep track of its usage as described below. # The
+ * first caller that allocates a destination port shall always succeed and the
+ * HWRM shall save the destination port configuration for that tunnel type and
+ * increment the usage count to 1. # Subsequent callers allocating the same
+ * destination port for that tunnel type shall succeed and the HWRM shall
+ * increment the usage count for that port for each subsequent caller that
+ * succeeds. # Any subsequent caller trying to allocate a different destination
+ * port for that tunnel type shall fail until the usage count for the original
+ * destination port goes to zero. # A caller that frees a port will cause the
+ * usage count for that port to decrement.
+ */
+/* Input (24 bytes) */
+struct hwrm_tunnel_dst_port_alloc_input {
+ uint16_t req_type;
/*
- * Generic Routing Encapsulation (GRE) inside
- * Ethernet payload
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_L2GRE UINT32_C(0x3)
- /* IP in IP */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPIP UINT32_C(0x4)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
- /* Multi-Protocol Lable Switching (MPLS) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_MPLS UINT32_C(0x6)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_STT UINT32_C(0x7)
+ uint16_t cmpl_ring;
/*
- * Generic Routing Encapsulation (GRE) inside IP
- * datagram payload
- */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_IPGRE UINT32_C(0x8)
- /* Any tunneled traffic */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_TUNNEL_TYPE_ANYTUNNEL UINT32_C(0xff)
- uint8_t unused_7;
- uint16_t dst_id;
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
+ */
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * If set, this value shall represent the Logical VNIC ID of the
- * destination VNIC for the RX path and network port id of the
- * destination port for the TX path.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- uint16_t mirror_vnic_id;
- /* Logical VNIC ID of the VNIC where traffic is mirrored. */
- uint8_t pri_hint;
+ uint64_t resp_addr;
/*
- * This hint is provided to help in placing the filter in the
- * filter table.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- /* No preference */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_NO_PREFER UINT32_C(0x0)
- /* Above the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_ABOVE_FILTER UINT32_C(0x1)
- /* Below the given filter */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_BELOW_FILTER UINT32_C(0x2)
- /* As high as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MAX UINT32_C(0x3)
- /* As low as possible */
- #define HWRM_CFA_L2_FILTER_ALLOC_INPUT_PRI_HINT_MIN UINT32_C(0x4)
- uint8_t unused_8;
- uint32_t unused_9;
- uint64_t l2_filter_id_hint;
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ uint8_t unused_0;
+ uint16_t tunnel_dst_port_val;
/*
- * This is the ID of the filter that goes along with the
- * pri_hint. This field is valid only for the following values.
- * 1 - Above the given filter 2 - Below the given filter
+ * This field represents the value of L4 destination port used
+ * for the given tunnel type. This field is valid for specific
+ * tunnel types that use layer 4 (e.g. UDP) transports for
+ * tunneling. This field is in network byte order. A value of 0
+ * shall fail the command.
*/
+ uint32_t unused_1;
} __attribute__((packed));
-/* Output (24 bytes) */
-struct hwrm_cfa_l2_filter_alloc_output {
+/* Output (16 bytes) */
+struct hwrm_tunnel_dst_port_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint64_t l2_filter_id;
- /*
- * This value identifies a set of CFA data structures used for
- * an L2 context.
- */
- uint32_t flow_id;
+ uint16_t tunnel_dst_port_id;
/*
- * This is the ID of the flow associated with this filter. This
- * value shall be used to match and associate the flow
- * identifier returned in completion records. A value of
- * 0xFFFFFFFF shall indicate no flow id.
+ * Identifier of a tunnel L4 destination port value. Only
+ * applies to tunnel types that has l4 destination port
+ * parameters.
*/
uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
+ uint8_t unused_4;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_cfa_l2_filter_free */
+/* hwrm_tunnel_dst_port_free */
/*
- * Description: Free a L2 filter. The HWRM shall free all associated filter
- * resources with the L2 filter.
+ * Description: This function is called by a driver to free l4 destination port
+ * for a specific tunnel type.
*/
-/* Input (24 bytes) */
-struct hwrm_cfa_l2_filter_free_input {
+/* Input (24 bytes) */
+struct hwrm_tunnel_dst_port_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint64_t l2_filter_id;
+ uint8_t tunnel_type;
+ /* Tunnel Type. */
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE UINT32_C(0x5)
+ uint8_t unused_0;
+ uint16_t tunnel_dst_port_id;
/*
- * This value identifies a set of CFA data structures used for
- * an L2 context.
+ * Identifier of a tunnel L4 destination port value. Only
+ * applies to tunnel types that has l4 destination port
+ * parameters.
*/
+ uint32_t unused_1;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_cfa_l2_filter_free_output {
+/* Output (16 bytes) */
+struct hwrm_tunnel_dst_port_free_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
*/
} __attribute__((packed));
-/* hwrm_cfa_l2_filter_cfg */
-/* Description: Change the configuration of an existing L2 filter */
-/* Input (40 bytes) */
-struct hwrm_cfa_l2_filter_cfg_input {
+/* hwrm_stat_ctx_alloc */
+/*
+ * Description: This command allocates and does basic preparation for a stat
+ * context.
+ */
+/* Input (32 bytes) */
+struct hwrm_stat_ctx_alloc_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t flags;
- /*
- * Enumeration denoting the RX, TX type of the resource. This
- * enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
- */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* tx path */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_TX (UINT32_C(0x0) << 0)
- /* rx path */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX (UINT32_C(0x1) << 0)
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_LAST \
- CFA_L2_FILTER_CFG_INPUT_FLAGS_PATH_RX
- /*
- * Setting of this flag indicates drop action. If this flag is
- * not set, then it should be considered accept action.
- */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_FLAGS_DROP UINT32_C(0x2)
- uint32_t enables;
- /* This bit must be '1' for the dst_id field to be configured. */
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_DST_ID UINT32_C(0x1)
+ uint64_t stats_dma_addr;
+ /* This is the address for statistic block. */
+ uint32_t update_period_ms;
/*
- * This bit must be '1' for the new_mirror_vnic_id field to be
- * configured.
+ * The statistic block update period in ms. e.g. 250ms, 500ms,
+ * 750ms, 1000ms. If update_period_ms is 0, then the stats
+ * update shall be never done and the DMA address shall not be
+ * used. In this case, the stat block can only be read by
+ * hwrm_stat_ctx_query command.
*/
- #define HWRM_CFA_L2_FILTER_CFG_INPUT_ENABLES_NEW_MIRROR_VNIC_ID UINT32_C(0x2)
- uint64_t l2_filter_id;
+ uint8_t stat_ctx_flags;
/*
- * This value identifies a set of CFA data structures used for
- * an L2 context.
+ * This field is used to specify statistics context specific
+ * configuration flags.
*/
- uint32_t dst_id;
/*
- * If set, this value shall represent the Logical VNIC ID of the
- * destination VNIC for the RX path and network port id of the
- * destination port for the TX path.
+ * When this bit is set to '1', the statistics context shall be
+ * allocated for RoCE traffic only. In this case, traffic other
+ * than offloaded RoCE traffic shall not be included in this
+ * statistic context. When this bit is set to '0', the
+ * statistics context shall be used for the network traffic
+ * other than offloaded RoCE traffic.
*/
- uint32_t new_mirror_vnic_id;
- /* New Logical VNIC ID of the VNIC where traffic is mirrored. */
+ #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1)
+ uint8_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_cfa_l2_filter_cfg_output {
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_alloc_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t unused_0;
+ uint32_t stat_ctx_id;
+ /* This is the statistics context ID value. */
+ uint8_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
- uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_cfa_l2_set_rx_mask */
-/* Description: This command will set rx mask of the function. */
-/* Input (56 bytes) */
-struct hwrm_cfa_l2_set_rx_mask_input {
+/* hwrm_stat_ctx_free */
+/* Description: This command is used to free a stat context. */
+/* Input (24 bytes) */
+struct hwrm_stat_ctx_free_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t vnic_id;
- /* VNIC ID */
- uint32_t mask;
- /* Reserved for future use. */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_RESERVED UINT32_C(0x1)
- /*
- * When this bit is '1', the function is requested to accept
- * multi-cast packets specified by the multicast addr table.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_MCAST UINT32_C(0x2)
- /*
- * When this bit is '1', the function is requested to accept all
- * multi-cast packets.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ALL_MCAST UINT32_C(0x4)
- /*
- * When this bit is '1', the function is requested to accept
- * broadcast packets.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_BCAST UINT32_C(0x8)
- /*
- * When this bit is '1', the function is requested to be put in
- * the promiscuous mode. The HWRM should accept any function to
- * set up promiscuous mode. The HWRM shall follow the semantics
- * below for the promiscuous mode support. # When partitioning
- * is not enabled on a port (i.e. single PF on the port), then
- * the PF shall be allowed to be in the promiscuous mode. When
- * the PF is in the promiscuous mode, then it shall receive all
- * host bound traffic on that port. # When partitioning is
- * enabled on a port (i.e. multiple PFs per port) and a PF on
- * that port is in the promiscuous mode, then the PF receives
- * all traffic within that partition as identified by a unique
- * identifier for the PF (e.g. S-Tag). If a unique outer VLAN
- * for the PF is specified, then the setting of promiscuous mode
- * on that PF shall result in the PF receiving all host bound
- * traffic with matching outer VLAN. # A VF shall can be set in
- * the promiscuous mode. In the promiscuous mode, the VF does
- * not receive any traffic unless a unique outer VLAN for the VF
- * is specified. If a unique outer VLAN for the VF is specified,
- * then the setting of promiscuous mode on that VF shall result
- * in the VF receiving all host bound traffic with the matching
- * outer VLAN. # The HWRM shall allow the setting of promiscuous
- * mode on a function independently from the promiscuous mode
- * settings on other functions.
- */
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_PROMISCUOUS UINT32_C(0x10)
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
+} __attribute__((packed));
+
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_free_output {
+ uint16_t error_code;
/*
- * If this flag is set, the corresponding RX filters shall be
- * set up to cover multicast/broadcast filters for the outermost
- * Layer 2 destination MAC address field.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_OUTERMOST UINT32_C(0x20)
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * If this flag is set, the corresponding RX filters shall be
- * set up to cover multicast/broadcast filters for the VLAN-
- * tagged packets that match the TPID and VID fields of VLAN
- * tags in the VLAN tag table specified in this command.
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
*/
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLANONLY UINT32_C(0x40)
+ uint32_t stat_ctx_id;
+ /* This is the statistics context ID value. */
+ uint8_t unused_0;
+ uint8_t unused_1;
+ uint8_t unused_2;
+ uint8_t valid;
/*
- * If this flag is set, the corresponding RX filters shall be
- * set up to cover multicast/broadcast filters for non-VLAN
- * tagged packets and VLAN-tagged packets that match the TPID
- * and VID fields of VLAN tags in the VLAN tag table specified
- * in this command.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been completely
+ * written. When writing a command completion or response to an
+ * internal processor, the order of writes has to be such that
+ * this field is written last.
*/
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_VLAN_NONVLAN UINT32_C(0x80)
+} __attribute__((packed));
+
+/* hwrm_stat_ctx_clr_stats */
+/* Description: This command clears statistics of a context. */
+/* Input (24 bytes) */
+struct hwrm_stat_ctx_clr_stats_input {
+ uint16_t req_type;
/*
- * If this flag is set, the corresponding RX filters shall be
- * set up to cover multicast/broadcast filters for non-VLAN
- * tagged packets and VLAN-tagged packets matching any VLAN tag.
- * If this flag is set, then the HWRM shall ignore VLAN tags
- * specified in vlan_tag_tbl. If none of vlanonly, vlan_nonvlan,
- * and anyvlan_nonvlan flags is set, then the HWRM shall ignore
- * VLAN tags specified in vlan_tag_tbl. The HWRM client shall
- * set at most one flag out of vlanonly, vlan_nonvlan, and
- * anyvlan_nonvlan.
+ * This value indicates what type of request this is. The format
+ * for the rest of the command is determined by this field.
*/
- #define HWRM_CFA_L2_SET_RX_MASK_INPUT_MASK_ANYVLAN_NONVLAN UINT32_C(0x100)
- uint64_t mc_tbl_addr;
- /* This is the address for mcast address tbl. */
- uint32_t num_mc_entries;
+ uint16_t cmpl_ring;
/*
- * This value indicates how many entries in mc_tbl are valid.
- * Each entry is 6 bytes.
+ * This value indicates the what completion ring the request
+ * will be optionally completed on. If the value is -1, then no
+ * CR completion will be generated. Any other value must be a
+ * valid CR ring_id value for this function.
*/
- uint32_t unused_0;
- uint64_t vlan_tag_tbl_addr;
+ uint16_t seq_id;
+ /* This value indicates the command sequence number. */
+ uint16_t target_id;
/*
- * This is the address for VLAN tag table. Each VLAN entry in
- * the table is 4 bytes of a VLAN tag including TPID, PCP, DEI,
- * and VID fields in network byte order.
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function
+ * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
+ * - HWRM
*/
- uint32_t num_vlan_tags;
+ uint64_t resp_addr;
/*
- * This value indicates how many entries in vlan_tag_tbl are
- * valid. Each entry is 4 bytes.
+ * This is the host address where the response will be written
+ * when the request is complete. This area must be 16B aligned
+ * and must be cleared to zero before the request is made.
*/
- uint32_t unused_1;
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
+ uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_cfa_l2_set_rx_mask_output {
+/* Output (16 bytes) */
+struct hwrm_stat_ctx_clr_stats_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
*/
} __attribute__((packed));
-/* hwrm_stat_ctx_alloc */
-/*
- * Description: This command allocates and does basic preparation for a stat
- * context.
- */
-/* Input (32 bytes) */
-struct hwrm_stat_ctx_alloc_input {
+/* hwrm_stat_ctx_query */
+/* Description: This command returns statistics of a context. */
+/* Input (24 bytes) */
+
+struct hwrm_stat_ctx_query_input {
uint16_t req_type;
/*
- * This value indicates what type of request this is. The format
- * for the rest of the command is determined by this field.
+ * This value indicates what type of request this is. The format for the
+ * rest of the command is determined by this field.
*/
uint16_t cmpl_ring;
/*
- * This value indicates the what completion ring the request
- * will be optionally completed on. If the value is -1, then no
- * CR completion will be generated. Any other value must be a
- * valid CR ring_id value for this function.
+ * This value indicates the what completion ring the request will be
+ * optionally completed on. If the value is -1, then no CR completion
+ * will be generated. Any other value must be a valid CR ring_id value
+ * for this function.
*/
uint16_t seq_id;
/* This value indicates the command sequence number. */
uint16_t target_id;
/*
- * Target ID of this command. 0x0 - 0xFFF8 - Used for function
- * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF
- * - HWRM
+ * Target ID of this command. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - HWRM
*/
uint64_t resp_addr;
/*
- * This is the host address where the response will be written
- * when the request is complete. This area must be 16B aligned
- * and must be cleared to zero before the request is made.
- */
- uint64_t stats_dma_addr;
- /* This is the address for statistic block. */
- uint32_t update_period_ms;
- /*
- * The statistic block update period in ms. e.g. 250ms, 500ms,
- * 750ms, 1000ms. If update_period_ms is 0, then the stats
- * update shall be never done and the DMA address shall not be
- * used. In this case, the stat block can only be read by
- * hwrm_stat_ctx_query command.
+ * This is the host address where the response will be written when the
+ * request is complete. This area must be 16B aligned and must be
+ * cleared to zero before the request is made.
*/
+ uint32_t stat_ctx_id;
+ /* ID of the statistics context that is being queried. */
uint32_t unused_0;
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_alloc_output {
+/* Output (176 bytes) */
+
+struct hwrm_stat_ctx_query_output {
uint16_t error_code;
/*
- * Pass/Fail or error type Note: receiver to verify the in
- * parameters, and fail the call with an error when appropriate
+ * Pass/Fail or error type Note: receiver to verify the in parameters,
+ * and fail the call with an error when appropriate
*/
uint16_t req_type;
/* This field returns the type of original request. */
/* This field provides original sequence number of the command. */
uint16_t resp_len;
/*
- * This field is the length of the response in bytes. The last
- * byte of the response is a valid flag that will read as '1'
- * when the command has been completely written to memory.
+ * This field is the length of the response in bytes. The last byte of
+ * the response is a valid flag that will read as '1' when the command
+ * has been completely written to memory.
*/
- uint32_t stat_ctx_id;
- /* This is the statistics context ID value. */
- uint8_t unused_0;
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_err_pkts;
+ /* Number of transmitted packets with error */
+ uint64_t tx_drop_pkts;
+ /* Number of dropped packets on transmit path */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t rx_ucast_pkts;
+ /* Number of received unicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_err_pkts;
+ /* Number of received packets with error */
+ uint64_t rx_drop_pkts;
+ /* Number of dropped packets on received path */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast packets */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregated unicast bytes */
+ uint64_t rx_agg_events;
+ /* Number of aggregation events */
+ uint64_t rx_agg_aborts;
+ /* Number of aborted aggregations */
+ uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
uint8_t valid;
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been completely
- * written. When writing a command completion or response to an
- * internal processor, the order of writes has to be such that
- * this field is written last.
+ * This field is used in Output records to indicate that the output is
+ * completely written to RAM. This field should be read as '1' to
+ * indicate that the output has been completely written. When writing a
+ * command completion or response to an internal processor, the order of
+ * writes has to be such that this field is written last.
*/
} __attribute__((packed));
-/* hwrm_stat_ctx_free */
-/* Description: This command is used to free a stat context. */
-/* Input (24 bytes) */
-struct hwrm_stat_ctx_free_input {
+/* hwrm_exec_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated request to the
+ * HWRM. This command instructs the HWRM to execute the request and forward the
+ * response of the encapsulated request to the location specified in the
+ * original request that is encapsulated. The target id of this command shall be
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * acknowledge the receipt of the encapsulated request and forwarding of the
+ * response.
+ */
+/* Input (128 bytes) */
+struct hwrm_exec_fwd_resp_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t stat_ctx_id;
- /* ID of the statistics context that is being queried. */
- uint32_t unused_0;
+ uint32_t encap_request[26];
+ /*
+ * This is an encapsulated request. This request should be
+ * executed by the HWRM and the response should be provided in
+ * the response buffer inside the encapsulated request.
+ */
+ uint16_t encap_resp_target_id;
+ /*
+ * This value indicates the target id of the response to the
+ * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
+ * HWRM
+ */
+ uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_free_output {
+/* Output (16 bytes) */
+struct hwrm_exec_fwd_resp_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t stat_ctx_id;
- /* This is the statistics context ID value. */
- uint8_t unused_0;
+ uint32_t unused_0;
uint8_t unused_1;
uint8_t unused_2;
+ uint8_t unused_3;
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-/* hwrm_stat_ctx_clr_stats */
-/* Description: This command clears statistics of a context. */
-/* Input (24 bytes) */
-struct hwrm_stat_ctx_clr_stats_input {
+/* hwrm_reject_fwd_resp */
+/*
+ * Description: This command is used to send an encapsulated request to the
+ * HWRM. This command instructs the HWRM to reject the request and forward the
+ * error response of the encapsulated request to the location specified in the
+ * original request that is encapsulated. The target id of this command shall be
+ * set to 0xFFFF (HWRM). The response location in this command shall be used to
+ * acknowledge the receipt of the encapsulated request and forwarding of the
+ * response.
+ */
+/* Input (128 bytes) */
+struct hwrm_reject_fwd_resp_input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t stat_ctx_id;
- /* ID of the statistics context that is being queried. */
- uint32_t unused_0;
+ uint32_t encap_request[26];
+ /*
+ * This is an encapsulated request. This request should be
+ * rejected by the HWRM and the error response should be
+ * provided in the response buffer inside the encapsulated
+ * request.
+ */
+ uint16_t encap_resp_target_id;
+ /*
+ * This value indicates the target id of the response to the
+ * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
+ * HWRM
+ */
+ uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_stat_ctx_clr_stats_output {
+/* Output (16 bytes) */
+struct hwrm_reject_fwd_resp_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
*/
} __attribute__((packed));
-/* hwrm_exec_fwd_resp */
+/* Hardware Resource Manager Specification */
+/* Description: This structure is used to specify port description. */
/*
- * Description: This command is used to send an encapsulated request to the
- * HWRM. This command instructs the HWRM to execute the request and forward the
- * response of the encapsulated request to the location specified in the
- * original request that is encapsulated. The target id of this command shall be
- * set to 0xFFFF (HWRM). The response location in this command shall be used to
- * acknowledge the receipt of the encapsulated request and forwarding of the
- * response.
+ * Note: The Hardware Resource Manager (HWRM) manages various hardware resources
+ * inside the chip. The HWRM is implemented in firmware, and runs on embedded
+ * processors inside the chip. This firmware service is vital part of the chip.
+ * The chip can not be used by a driver or HWRM client without the HWRM.
*/
-/* Input (128 bytes) */
-struct hwrm_exec_fwd_resp_input {
+/* Input (16 bytes) */
+struct input {
uint16_t req_type;
/*
* This value indicates what type of request this is. The format
* when the request is complete. This area must be 16B aligned
* and must be cleared to zero before the request is made.
*/
- uint32_t encap_request[26];
+} __attribute__((packed));
+
+/* Output (8 bytes) */
+struct output {
+ uint16_t error_code;
/*
- * This is an encapsulated request. This request should be
- * executed by the HWRM and the response should be provided in
- * the response buffer inside the encapsulated request.
+ * Pass/Fail or error type Note: receiver to verify the in
+ * parameters, and fail the call with an error when appropriate
*/
- uint16_t encap_resp_target_id;
+ uint16_t req_type;
+ /* This field returns the type of original request. */
+ uint16_t seq_id;
+ /* This field provides original sequence number of the command. */
+ uint16_t resp_len;
/*
- * This value indicates the target id of the response to the
- * encapsulated request. 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF -
- * HWRM
+ * This field is the length of the response in bytes. The last
+ * byte of the response is a valid flag that will read as '1'
+ * when the command has been completely written to memory.
+ */
+} __attribute__((packed));
+
+/* Short Command Structure (16 bytes) */
+struct hwrm_short_input {
+ uint16_t req_type;
+ uint16_t signature;
+ #define HWRM_SHORT_REQ_SIGNATURE_SHORT_CMD (UINT32_C(0x4321))
+ uint16_t unused_0;
+ uint16_t size;
+ uint64_t req_addr;
+} __attribute__((packed));
+
+#define HWRM_GET_HWRM_ERROR_CODE(arg) \
+ { \
+ typeof(arg) x = (arg); \
+ ((x) == 0xf ? "HWRM_ERROR" : \
+ ((x) == 0xffff ? "CMD_NOT_SUPPORTED" : \
+ ((x) == 0xfffe ? "UNKNOWN_ERR" : \
+ ((x) == 0x4 ? "RESOURCE_ALLOC_ERROR" : \
+ ((x) == 0x5 ? "INVALID_FLAGS" : \
+ ((x) == 0x6 ? "INVALID_ENABLES" : \
+ ((x) == 0x0 ? "SUCCESS" : \
+ ((x) == 0x1 ? "FAIL" : \
+ ((x) == 0x2 ? "INVALID_PARAMS" : \
+ ((x) == 0x3 ? "RESOURCE_ACCESS_DENIED" : \
+ "Unknown error_code")))))))))) \
+ }
+
+/* Return Codes (8 bytes) */
+struct ret_codes {
+ uint16_t error_code;
+ /* These are numbers assigned to return/error codes. */
+ /* Request was successfully executed by the HWRM. */
+ #define HWRM_ERR_CODE_SUCCESS (UINT32_C(0x0))
+ /* THe HWRM failed to execute the request. */
+ #define HWRM_ERR_CODE_FAIL (UINT32_C(0x1))
+ /*
+ * The request contains invalid argument(s) or
+ * input parameters.
+ */
+ #define HWRM_ERR_CODE_INVALID_PARAMS (UINT32_C(0x2))
+ /*
+ * The requester is not allowed to access the
+ * requested resource. This error code shall be
+ * provided in a response to a request to query
+ * or modify an existing resource that is not
+ * accessible by the requester.
+ */
+ #define HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED (UINT32_C(0x3))
+ /*
+ * The HWRM is unable to allocate the requested
+ * resource. This code only applies to requests
+ * for HWRM resource allocations.
*/
+ #define HWRM_ERR_CODE_RESOURCE_ALLOC_ERROR (UINT32_C(0x4))
+ /* Invalid combination of flags is specified in the request. */
+ #define HWRM_ERR_CODE_INVALID_FLAGS (UINT32_C(0x5))
+ /*
+ * Invalid combination of enables fields is
+ * specified in the request.
+ */
+ #define HWRM_ERR_CODE_INVALID_ENABLES (UINT32_C(0x6))
+ /*
+ * Generic HWRM execution error that represents
+ * an internal error.
+ */
+ #define HWRM_ERR_CODE_HWRM_ERROR (UINT32_C(0xf))
+ /* Unknown error */
+ #define HWRM_ERR_CODE_UNKNOWN_ERR (UINT32_C(0xfffe))
+ /* Unsupported or invalid command */
+ #define HWRM_ERR_CODE_CMD_NOT_SUPPORTED (UINT32_C(0xffff))
uint16_t unused_0[3];
} __attribute__((packed));
-/* Output (16 bytes) */
-struct hwrm_exec_fwd_resp_output {
+/* Output (16 bytes) */
+struct hwrm_err_output {
uint16_t error_code;
/*
* Pass/Fail or error type Note: receiver to verify the in
* byte of the response is a valid flag that will read as '1'
* when the command has been completely written to memory.
*/
- uint32_t unused_0;
- uint8_t unused_1;
- uint8_t unused_2;
- uint8_t unused_3;
+ uint32_t opaque_0;
+ /* debug info for this error response. */
+ uint16_t opaque_1;
+ /* debug info for this error response. */
+ uint8_t cmd_err;
+ /*
+ * In the case of an error response, command specific error code
+ * is returned in this field.
+ */
uint8_t valid;
/*
* This field is used in Output records to indicate that the
*/
} __attribute__((packed));
-#endif
+/* Port Tx Statistics Formats (408 bytes) */
+struct tx_port_stats {
+ uint64_t tx_64b_frames;
+ /* Total Number of 64 Bytes frames transmitted */
+ uint64_t tx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames transmitted */
+ uint64_t tx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames transmitted */
+ uint64_t tx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames transmitted */
+ uint64_t tx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames transmitted */
+ uint64_t tx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames transmitted */
+ uint64_t tx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame
+ * transmitted which is 1519 to 1522 bytes in length inclusive
+ * (excluding framing bits but including FCS bytes).
+ */
+ uint64_t tx_1519b_2047_frames;
+ /* Total Number of 1519-2047 Bytes frames transmitted */
+ uint64_t tx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames transmitted */
+ uint64_t tx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames transmitted */
+ uint64_t tx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames transmitted */
+ uint64_t tx_good_frames;
+ /* Total Number of good frames transmitted */
+ uint64_t tx_total_frames;
+ /* Total Number of frames transmitted */
+ uint64_t tx_ucast_frames;
+ /* Total number of unicast frames transmitted */
+ uint64_t tx_mcast_frames;
+ /* Total number of multicast frames transmitted */
+ uint64_t tx_bcast_frames;
+ /* Total number of broadcast frames transmitted */
+ uint64_t tx_pause_frames;
+ /* Total number of PAUSE control frames transmitted */
+ uint64_t tx_pfc_frames;
+ /* Total number of PFC/per-priority PAUSE control frames transmitted */
+ uint64_t tx_jabber_frames;
+ /* Total number of jabber frames transmitted */
+ uint64_t tx_fcs_err_frames;
+ /* Total number of frames transmitted with FCS error */
+ uint64_t tx_control_frames;
+ /* Total number of control frames transmitted */
+ uint64_t tx_oversz_frames;
+ /* Total number of over-sized frames transmitted */
+ uint64_t tx_single_dfrl_frames;
+ /* Total number of frames with single deferral */
+ uint64_t tx_multi_dfrl_frames;
+ /* Total number of frames with multiple deferrals */
+ uint64_t tx_single_coll_frames;
+ /* Total number of frames with single collision */
+ uint64_t tx_multi_coll_frames;
+ /* Total number of frames with multiple collisions */
+ uint64_t tx_late_coll_frames;
+ /* Total number of frames with late collisions */
+ uint64_t tx_excessive_coll_frames;
+ /* Total number of frames with excessive collisions */
+ uint64_t tx_frag_frames;
+ /* Total number of fragmented frames transmitted */
+ uint64_t tx_err;
+ /* Total number of transmit errors */
+ uint64_t tx_tagged_frames;
+ /* Total number of single VLAN tagged frames transmitted */
+ uint64_t tx_dbl_tagged_frames;
+ /* Total number of double VLAN tagged frames transmitted */
+ uint64_t tx_runt_frames;
+ /* Total number of runt frames transmitted */
+ uint64_t tx_fifo_underruns;
+ /* Total number of TX FIFO under runs */
+ uint64_t tx_pfc_ena_frames_pri0;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 0
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri1;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 1
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri2;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 2
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri3;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 3
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri4;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 4
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri5;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 5
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri6;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 6
+ * transmitted
+ */
+ uint64_t tx_pfc_ena_frames_pri7;
+ /*
+ * Total number of PFC frames with PFC enabled bit for Pri 7
+ * transmitted
+ */
+ uint64_t tx_eee_lpi_events;
+ /* Total number of EEE LPI Events on TX */
+ uint64_t tx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on TX */
+ uint64_t tx_llfc_logical_msgs;
+ /*
+ * Total number of Link Level Flow Control (LLFC) messages
+ * transmitted
+ */
+ uint64_t tx_hcfc_msgs;
+ /* Total number of HCFC messages transmitted */
+ uint64_t tx_total_collisions;
+ /* Total number of TX collisions */
+ uint64_t tx_bytes;
+ /* Total number of transmitted bytes */
+ uint64_t tx_xthol_frames;
+ /* Total number of end-to-end HOL frames */
+ uint64_t tx_stat_discard;
+ /* Total Tx Drops per Port reported by STATS block */
+ uint64_t tx_stat_error;
+ /* Total Tx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
+/* Port Rx Statistics Formats (528 bytes) */
+struct rx_port_stats {
+ uint64_t rx_64b_frames;
+ /* Total Number of 64 Bytes frames received */
+ uint64_t rx_65b_127b_frames;
+ /* Total Number of 65-127 Bytes frames received */
+ uint64_t rx_128b_255b_frames;
+ /* Total Number of 128-255 Bytes frames received */
+ uint64_t rx_256b_511b_frames;
+ /* Total Number of 256-511 Bytes frames received */
+ uint64_t rx_512b_1023b_frames;
+ /* Total Number of 512-1023 Bytes frames received */
+ uint64_t rx_1024b_1518_frames;
+ /* Total Number of 1024-1518 Bytes frames received */
+ uint64_t rx_good_vlan_frames;
+ /*
+ * Total Number of each good VLAN (exludes FCS errors) frame
+ * received which is 1519 to 1522 bytes in length inclusive
+ * (excluding framing bits but including FCS bytes).
+ */
+ uint64_t rx_1519b_2047b_frames;
+ /* Total Number of 1519-2047 Bytes frames received */
+ uint64_t rx_2048b_4095b_frames;
+ /* Total Number of 2048-4095 Bytes frames received */
+ uint64_t rx_4096b_9216b_frames;
+ /* Total Number of 4096-9216 Bytes frames received */
+ uint64_t rx_9217b_16383b_frames;
+ /* Total Number of 9217-16383 Bytes frames received */
+ uint64_t rx_total_frames;
+ /* Total number of frames received */
+ uint64_t rx_ucast_frames;
+ /* Total number of unicast frames received */
+ uint64_t rx_mcast_frames;
+ /* Total number of multicast frames received */
+ uint64_t rx_bcast_frames;
+ /* Total number of broadcast frames received */
+ uint64_t rx_fcs_err_frames;
+ /* Total number of received frames with FCS error */
+ uint64_t rx_ctrl_frames;
+ /* Total number of control frames received */
+ uint64_t rx_pause_frames;
+ /* Total number of PAUSE frames received */
+ uint64_t rx_pfc_frames;
+ /* Total number of PFC frames received */
+ uint64_t rx_unsupported_opcode_frames;
+ /* Total number of frames received with an unsupported opcode */
+ uint64_t rx_unsupported_da_pausepfc_frames;
+ /*
+ * Total number of frames received with an unsupported DA for
+ * pause and PFC
+ */
+ uint64_t rx_wrong_sa_frames;
+ /* Total number of frames received with an unsupported SA */
+ uint64_t rx_align_err_frames;
+ /* Total number of received packets with alignment error */
+ uint64_t rx_oor_len_frames;
+ /* Total number of received frames with out-of-range length */
+ uint64_t rx_code_err_frames;
+ /* Total number of received frames with error termination */
+ uint64_t rx_false_carrier_frames;
+ /*
+ * Total number of received frames with a false carrier is
+ * detected during idle, as defined by RX_ER samples active and
+ * RXD is 0xE. The event is reported along with the statistics
+ * generated on the next received frame. Only one false carrier
+ * condition can be detected and logged between frames. Carrier
+ * event, valid for 10M/100M speed modes only.
+ */
+ uint64_t rx_ovrsz_frames;
+ /* Total number of over-sized frames received */
+ uint64_t rx_jbr_frames;
+ /* Total number of jabber packets received */
+ uint64_t rx_mtu_err_frames;
+ /* Total number of received frames with MTU error */
+ uint64_t rx_match_crc_frames;
+ /* Total number of received frames with CRC match */
+ uint64_t rx_promiscuous_frames;
+ /* Total number of frames received promiscuously */
+ uint64_t rx_tagged_frames;
+ /* Total number of received frames with one or two VLAN tags */
+ uint64_t rx_double_tagged_frames;
+ /* Total number of received frames with two VLAN tags */
+ uint64_t rx_trunc_frames;
+ /* Total number of truncated frames received */
+ uint64_t rx_good_frames;
+ /* Total number of good frames (without errors) received */
+ uint64_t rx_pfc_xon2xoff_frames_pri0;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 0
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri1;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 1
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri2;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 2
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri3;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 3
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri4;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 4
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri5;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 5
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri6;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 6
+ */
+ uint64_t rx_pfc_xon2xoff_frames_pri7;
+ /*
+ * Total number of received PFC frames with transition from XON
+ * to XOFF on Pri 7
+ */
+ uint64_t rx_pfc_ena_frames_pri0;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 0
+ */
+ uint64_t rx_pfc_ena_frames_pri1;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 1
+ */
+ uint64_t rx_pfc_ena_frames_pri2;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 2
+ */
+ uint64_t rx_pfc_ena_frames_pri3;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 3
+ */
+ uint64_t rx_pfc_ena_frames_pri4;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 4
+ */
+ uint64_t rx_pfc_ena_frames_pri5;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 5
+ */
+ uint64_t rx_pfc_ena_frames_pri6;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 6
+ */
+ uint64_t rx_pfc_ena_frames_pri7;
+ /*
+ * Total number of received PFC frames with PFC enabled bit for
+ * Pri 7
+ */
+ uint64_t rx_sch_crc_err_frames;
+ /* Total Number of frames received with SCH CRC error */
+ uint64_t rx_undrsz_frames;
+ /* Total Number of under-sized frames received */
+ uint64_t rx_frag_frames;
+ /* Total Number of fragmented frames received */
+ uint64_t rx_eee_lpi_events;
+ /* Total number of RX EEE LPI Events */
+ uint64_t rx_eee_lpi_duration;
+ /* EEE LPI Duration Counter on RX */
+ uint64_t rx_llfc_physical_msgs;
+ /*
+ * Total number of physical type Link Level Flow Control (LLFC)
+ * messages received
+ */
+ uint64_t rx_llfc_logical_msgs;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC)
+ * messages received
+ */
+ uint64_t rx_llfc_msgs_with_crc_err;
+ /*
+ * Total number of logical type Link Level Flow Control (LLFC)
+ * messages received with CRC error
+ */
+ uint64_t rx_hcfc_msgs;
+ /* Total number of HCFC messages received */
+ uint64_t rx_hcfc_msgs_with_crc_err;
+ /* Total number of HCFC messages received with CRC error */
+ uint64_t rx_bytes;
+ /* Total number of received bytes */
+ uint64_t rx_runt_bytes;
+ /* Total number of bytes received in runt frames */
+ uint64_t rx_runt_frames;
+ /* Total number of runt frames received */
+ uint64_t rx_stat_discard;
+ /* Total Rx Discards per Port reported by STATS block */
+ uint64_t rx_stat_err;
+ /* Total Rx Error Drops per Port reported by STATS block */
+} __attribute__((packed));
+
+/* Periodic Statistics Context DMA to host (160 bytes) */
+/*
+ * per-context HW statistics -- chip view
+ */
+
+struct ctx_hw_stats64 {
+ uint64_t rx_ucast_pkts;
+ uint64_t rx_mcast_pkts;
+ uint64_t rx_bcast_pkts;
+ uint64_t rx_drop_pkts;
+ uint64_t rx_discard_pkts;
+ uint64_t rx_ucast_bytes;
+ uint64_t rx_mcast_bytes;
+ uint64_t rx_bcast_bytes;
+
+ uint64_t tx_ucast_pkts;
+ uint64_t tx_mcast_pkts;
+ uint64_t tx_bcast_pkts;
+ uint64_t tx_drop_pkts;
+ uint64_t tx_discard_pkts;
+ uint64_t tx_ucast_bytes;
+ uint64_t tx_mcast_bytes;
+ uint64_t tx_bcast_bytes;
+
+ uint64_t tpa_pkts;
+ uint64_t tpa_bytes;
+ uint64_t tpa_events;
+ uint64_t tpa_aborts;
+} __attribute__((packed));
+
+#endif /* _HSI_STRUCT_DEF_DPDK_ */
Code Review / deb_dpdk.git / blobdiff