#include <rte_malloc.h>
#include <rte_ethdev.h>
#include <rte_tcp.h>
+#include <rte_vdev.h>
+#include <rte_kvargs.h>
#include "rte_eth_bond.h"
#include "rte_eth_bond_private.h"
#include "rte_eth_bond_8023ad_private.h"
-#define DEFAULT_POLLING_INTERVAL_10_MS (10)
-
-const char pmd_bond_driver_name[] = "rte_bond_pmd";
-
int
check_for_bonded_ethdev(const struct rte_eth_dev *eth_dev)
{
return -1;
/* return 0 if driver name matches */
- return eth_dev->data->drv_name != pmd_bond_driver_name;
+ return eth_dev->data->drv_name != pmd_bond_drv.driver.name;
}
int
int
rte_eth_bond_create(const char *name, uint8_t mode, uint8_t socket_id)
{
- struct bond_dev_private *internals = NULL;
- struct rte_eth_dev *eth_dev = NULL;
- uint32_t vlan_filter_bmp_size;
-
- /* now do all data allocation - for eth_dev structure, dummy pci driver
- * and internal (private) data
- */
+ struct bond_dev_private *internals;
+ char devargs[52];
+ uint8_t port_id;
+ int ret;
if (name == NULL) {
RTE_BOND_LOG(ERR, "Invalid name specified");
- goto err;
- }
-
- if (socket_id >= number_of_sockets()) {
- RTE_BOND_LOG(ERR,
- "Invalid socket id specified to create bonded device on.");
- goto err;
- }
-
- internals = rte_zmalloc_socket(name, sizeof(*internals), 0, socket_id);
- if (internals == NULL) {
- RTE_BOND_LOG(ERR, "Unable to malloc internals on socket");
- goto err;
- }
-
- /* reserve an ethdev entry */
- eth_dev = rte_eth_dev_allocate(name);
- if (eth_dev == NULL) {
- RTE_BOND_LOG(ERR, "Unable to allocate rte_eth_dev");
- goto err;
- }
-
- eth_dev->data->dev_private = internals;
- eth_dev->data->nb_rx_queues = (uint16_t)1;
- eth_dev->data->nb_tx_queues = (uint16_t)1;
-
- TAILQ_INIT(&(eth_dev->link_intr_cbs));
-
- eth_dev->data->dev_link.link_status = ETH_LINK_DOWN;
-
- eth_dev->data->mac_addrs = rte_zmalloc_socket(name, ETHER_ADDR_LEN, 0,
- socket_id);
- if (eth_dev->data->mac_addrs == NULL) {
- RTE_BOND_LOG(ERR, "Unable to malloc mac_addrs");
- goto err;
+ return -EINVAL;
}
- eth_dev->data->dev_started = 0;
- eth_dev->data->promiscuous = 0;
- eth_dev->data->scattered_rx = 0;
- eth_dev->data->all_multicast = 0;
-
- eth_dev->dev_ops = &default_dev_ops;
- eth_dev->data->dev_flags = RTE_ETH_DEV_INTR_LSC |
- RTE_ETH_DEV_DETACHABLE;
- eth_dev->driver = NULL;
- eth_dev->data->kdrv = RTE_KDRV_NONE;
- eth_dev->data->drv_name = pmd_bond_driver_name;
- eth_dev->data->numa_node = socket_id;
-
- rte_spinlock_init(&internals->lock);
-
- internals->port_id = eth_dev->data->port_id;
- internals->mode = BONDING_MODE_INVALID;
- internals->current_primary_port = RTE_MAX_ETHPORTS + 1;
- internals->balance_xmit_policy = BALANCE_XMIT_POLICY_LAYER2;
- internals->xmit_hash = xmit_l2_hash;
- internals->user_defined_mac = 0;
- internals->link_props_set = 0;
-
- internals->link_status_polling_enabled = 0;
-
- internals->link_status_polling_interval_ms = DEFAULT_POLLING_INTERVAL_10_MS;
- internals->link_down_delay_ms = 0;
- internals->link_up_delay_ms = 0;
-
- internals->slave_count = 0;
- internals->active_slave_count = 0;
- internals->rx_offload_capa = 0;
- internals->tx_offload_capa = 0;
- internals->candidate_max_rx_pktlen = 0;
- internals->max_rx_pktlen = 0;
+ ret = snprintf(devargs, sizeof(devargs),
+ "driver=net_bonding,mode=%d,socket_id=%d", mode, socket_id);
+ if (ret < 0 || ret >= (int)sizeof(devargs))
+ return -ENOMEM;
- /* Initially allow to choose any offload type */
- internals->flow_type_rss_offloads = ETH_RSS_PROTO_MASK;
+ ret = rte_vdev_init(name, devargs);
+ if (ret)
+ return -ENOMEM;
- memset(internals->active_slaves, 0, sizeof(internals->active_slaves));
- memset(internals->slaves, 0, sizeof(internals->slaves));
+ ret = rte_eth_dev_get_port_by_name(name, &port_id);
+ RTE_ASSERT(!ret);
- /* Set mode 4 default configuration */
- bond_mode_8023ad_setup(eth_dev, NULL);
- if (bond_ethdev_mode_set(eth_dev, mode)) {
- RTE_BOND_LOG(ERR, "Failed to set bonded device %d mode too %d",
- eth_dev->data->port_id, mode);
- goto err;
- }
-
- vlan_filter_bmp_size =
- rte_bitmap_get_memory_footprint(ETHER_MAX_VLAN_ID + 1);
- internals->vlan_filter_bmpmem = rte_malloc(name, vlan_filter_bmp_size,
- RTE_CACHE_LINE_SIZE);
- if (internals->vlan_filter_bmpmem == NULL) {
- RTE_BOND_LOG(ERR,
- "Failed to allocate vlan bitmap for bonded device %u\n",
- eth_dev->data->port_id);
- goto err;
- }
-
- internals->vlan_filter_bmp = rte_bitmap_init(ETHER_MAX_VLAN_ID + 1,
- internals->vlan_filter_bmpmem, vlan_filter_bmp_size);
- if (internals->vlan_filter_bmp == NULL) {
- RTE_BOND_LOG(ERR,
- "Failed to init vlan bitmap for bonded device %u\n",
- eth_dev->data->port_id);
- rte_free(internals->vlan_filter_bmpmem);
- goto err;
- }
-
- return eth_dev->data->port_id;
+ /*
+ * To make bond_ethdev_configure() happy we need to free the
+ * internals->kvlist here.
+ *
+ * Also see comment in bond_ethdev_configure().
+ */
+ internals = rte_eth_devices[port_id].data->dev_private;
+ rte_kvargs_free(internals->kvlist);
+ internals->kvlist = NULL;
-err:
- rte_free(internals);
- if (eth_dev != NULL) {
- rte_free(eth_dev->data->mac_addrs);
- rte_eth_dev_release_port(eth_dev);
- }
- return -1;
+ return port_id;
}
int
rte_eth_bond_free(const char *name)
{
- struct rte_eth_dev *eth_dev = NULL;
- struct bond_dev_private *internals;
-
- /* now free all data allocation - for eth_dev structure,
- * dummy pci driver and internal (private) data
- */
-
- /* find an ethdev entry */
- eth_dev = rte_eth_dev_allocated(name);
- if (eth_dev == NULL)
- return -ENODEV;
-
- internals = eth_dev->data->dev_private;
- if (internals->slave_count != 0)
- return -EBUSY;
-
- if (eth_dev->data->dev_started == 1) {
- bond_ethdev_stop(eth_dev);
- bond_ethdev_close(eth_dev);
- }
-
- eth_dev->dev_ops = NULL;
- eth_dev->rx_pkt_burst = NULL;
- eth_dev->tx_pkt_burst = NULL;
-
- internals = eth_dev->data->dev_private;
- rte_bitmap_free(internals->vlan_filter_bmp);
- rte_free(internals->vlan_filter_bmpmem);
- rte_free(eth_dev->data->dev_private);
- rte_free(eth_dev->data->mac_addrs);
-
- rte_eth_dev_release_port(eth_dev);
-
- return 0;
+ return rte_vdev_uninit(name);
}
static int
Code Review / deb_dpdk.git / blobdiff