--- /dev/null
+/*-
+* BSD LICENSE
+*
+* Copyright (c) 2015-2016 Amazon.com, Inc. or its affiliates.
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions
+* are met:
+*
+* * Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* * Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* * Neither the name of copyright holder nor the names of its
+* contributors may be used to endorse or promote products derived
+* from this software without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef ENA_COM
+#define ENA_COM
+
+#include "ena_plat.h"
+#include "ena_common_defs.h"
+#include "ena_admin_defs.h"
+#include "ena_eth_io_defs.h"
+#include "ena_regs_defs.h"
+#if defined(__linux__) && !defined(__KERNEL__)
+#include <rte_lcore.h>
+#include <rte_spinlock.h>
+#define __iomem
+#endif
+
+#define ENA_MAX_NUM_IO_QUEUES 128U
+/* We need to queues for each IO (on for Tx and one for Rx) */
+#define ENA_TOTAL_NUM_QUEUES (2 * (ENA_MAX_NUM_IO_QUEUES))
+
+#define ENA_MAX_HANDLERS 256
+
+#define ENA_MAX_PHYS_ADDR_SIZE_BITS 48
+
+/* Unit in usec */
+#define ENA_REG_READ_TIMEOUT 200000
+
+#define ADMIN_SQ_SIZE(depth) ((depth) * sizeof(struct ena_admin_aq_entry))
+#define ADMIN_CQ_SIZE(depth) ((depth) * sizeof(struct ena_admin_acq_entry))
+#define ADMIN_AENQ_SIZE(depth) ((depth) * sizeof(struct ena_admin_aenq_entry))
+
+/*****************************************************************************/
+/*****************************************************************************/
+/* ENA adaptive interrupt moderation settings */
+
+#define ENA_INTR_LOWEST_USECS (0)
+#define ENA_INTR_LOWEST_PKTS (3)
+#define ENA_INTR_LOWEST_BYTES (2 * 1524)
+
+#define ENA_INTR_LOW_USECS (32)
+#define ENA_INTR_LOW_PKTS (12)
+#define ENA_INTR_LOW_BYTES (16 * 1024)
+
+#define ENA_INTR_MID_USECS (80)
+#define ENA_INTR_MID_PKTS (48)
+#define ENA_INTR_MID_BYTES (64 * 1024)
+
+#define ENA_INTR_HIGH_USECS (128)
+#define ENA_INTR_HIGH_PKTS (96)
+#define ENA_INTR_HIGH_BYTES (128 * 1024)
+
+#define ENA_INTR_HIGHEST_USECS (192)
+#define ENA_INTR_HIGHEST_PKTS (128)
+#define ENA_INTR_HIGHEST_BYTES (192 * 1024)
+
+#define ENA_INTR_INITIAL_TX_INTERVAL_USECS 196
+#define ENA_INTR_INITIAL_RX_INTERVAL_USECS 4
+#define ENA_INTR_DELAY_OLD_VALUE_WEIGHT 6
+#define ENA_INTR_DELAY_NEW_VALUE_WEIGHT 4
+
+enum ena_intr_moder_level {
+ ENA_INTR_MODER_LOWEST = 0,
+ ENA_INTR_MODER_LOW,
+ ENA_INTR_MODER_MID,
+ ENA_INTR_MODER_HIGH,
+ ENA_INTR_MODER_HIGHEST,
+ ENA_INTR_MAX_NUM_OF_LEVELS,
+};
+
+struct ena_intr_moder_entry {
+ unsigned int intr_moder_interval;
+ unsigned int pkts_per_interval;
+ unsigned int bytes_per_interval;
+};
+
+enum queue_direction {
+ ENA_COM_IO_QUEUE_DIRECTION_TX,
+ ENA_COM_IO_QUEUE_DIRECTION_RX
+};
+
+struct ena_com_buf {
+ dma_addr_t paddr; /**< Buffer physical address */
+ u16 len; /**< Buffer length in bytes */
+};
+
+struct ena_com_rx_buf_info {
+ u16 len;
+ u16 req_id;
+};
+
+struct ena_com_io_desc_addr {
+ void __iomem *pbuf_dev_addr; /* LLQ address */
+ void *virt_addr;
+ dma_addr_t phys_addr;
+ ena_mem_handle_t mem_handle;
+};
+
+struct ena_com_tx_meta {
+ u16 mss;
+ u16 l3_hdr_len;
+ u16 l3_hdr_offset;
+ u16 l3_outer_hdr_len; /* In words */
+ u16 l3_outer_hdr_offset;
+ u16 l4_hdr_len; /* In words */
+};
+
+struct ena_com_io_cq {
+ struct ena_com_io_desc_addr cdesc_addr;
+
+ u32 __iomem *db_addr;
+
+ /* Interrupt unmask register */
+ u32 __iomem *unmask_reg;
+
+ /* The completion queue head doorbell register */
+ uint32_t __iomem *cq_head_db_reg;
+
+ /* The value to write to the above register to unmask
+ * the interrupt of this queue
+ */
+ u32 msix_vector;
+
+ enum queue_direction direction;
+
+ /* holds the number of cdesc of the current packet */
+ u16 cur_rx_pkt_cdesc_count;
+ /* save the firt cdesc idx of the current packet */
+ u16 cur_rx_pkt_cdesc_start_idx;
+
+ u16 q_depth;
+ /* Caller qid */
+ u16 qid;
+
+ /* Device queue index */
+ u16 idx;
+ u16 head;
+ u16 last_head_update;
+ u8 phase;
+ u8 cdesc_entry_size_in_bytes;
+
+} ____cacheline_aligned;
+
+struct ena_com_io_sq {
+ struct ena_com_io_desc_addr desc_addr;
+
+ u32 __iomem *db_addr;
+ u8 __iomem *header_addr;
+
+ enum queue_direction direction;
+ enum ena_admin_placement_policy_type mem_queue_type;
+
+ u32 msix_vector;
+ struct ena_com_tx_meta cached_tx_meta;
+
+ u16 q_depth;
+ u16 qid;
+
+ u16 idx;
+ u16 tail;
+ u16 next_to_comp;
+ u16 tx_max_header_size;
+ u8 phase;
+ u8 desc_entry_size;
+ u8 dma_addr_bits;
+} ____cacheline_aligned;
+
+struct ena_com_admin_cq {
+ struct ena_admin_acq_entry *entries;
+ ena_mem_handle_t mem_handle;
+ dma_addr_t dma_addr;
+
+ u16 head;
+ u8 phase;
+};
+
+struct ena_com_admin_sq {
+ struct ena_admin_aq_entry *entries;
+ ena_mem_handle_t mem_handle;
+ dma_addr_t dma_addr;
+
+ u32 __iomem *db_addr;
+
+ u16 head;
+ u16 tail;
+ u8 phase;
+
+};
+
+struct ena_com_stats_admin {
+ u32 aborted_cmd;
+ u32 submitted_cmd;
+ u32 completed_cmd;
+ u32 out_of_space;
+ u32 no_completion;
+};
+
+struct ena_com_admin_queue {
+ void *q_dmadev;
+ ena_spinlock_t q_lock; /* spinlock for the admin queue */
+ struct ena_comp_ctx *comp_ctx;
+ u16 q_depth;
+ struct ena_com_admin_cq cq;
+ struct ena_com_admin_sq sq;
+
+ /* Indicate if the admin queue should poll for completion */
+ bool polling;
+
+ u16 curr_cmd_id;
+
+ /* Indicate that the ena was initialized and can
+ * process new admin commands
+ */
+ bool running_state;
+
+ /* Count the number of outstanding admin commands */
+ ena_atomic32_t outstanding_cmds;
+
+ struct ena_com_stats_admin stats;
+};
+
+struct ena_aenq_handlers;
+
+struct ena_com_aenq {
+ u16 head;
+ u8 phase;
+ struct ena_admin_aenq_entry *entries;
+ dma_addr_t dma_addr;
+ ena_mem_handle_t mem_handle;
+ u16 q_depth;
+ struct ena_aenq_handlers *aenq_handlers;
+};
+
+struct ena_com_mmio_read {
+ struct ena_admin_ena_mmio_req_read_less_resp *read_resp;
+ dma_addr_t read_resp_dma_addr;
+ ena_mem_handle_t read_resp_mem_handle;
+ u16 seq_num;
+ bool readless_supported;
+ /* spin lock to ensure a single outstanding read */
+ ena_spinlock_t lock;
+};
+
+struct ena_rss {
+ /* Indirect table */
+ u16 *host_rss_ind_tbl;
+ struct ena_admin_rss_ind_table_entry *rss_ind_tbl;
+ dma_addr_t rss_ind_tbl_dma_addr;
+ ena_mem_handle_t rss_ind_tbl_mem_handle;
+ u16 tbl_log_size;
+
+ /* Hash key */
+ enum ena_admin_hash_functions hash_func;
+ struct ena_admin_feature_rss_flow_hash_control *hash_key;
+ dma_addr_t hash_key_dma_addr;
+ ena_mem_handle_t hash_key_mem_handle;
+ u32 hash_init_val;
+
+ /* Flow Control */
+ struct ena_admin_feature_rss_hash_control *hash_ctrl;
+ dma_addr_t hash_ctrl_dma_addr;
+ ena_mem_handle_t hash_ctrl_mem_handle;
+
+};
+
+struct ena_host_attribute {
+ /* Debug area */
+ u8 *debug_area_virt_addr;
+ dma_addr_t debug_area_dma_addr;
+ ena_mem_handle_t debug_area_dma_handle;
+ u32 debug_area_size;
+
+ /* Host information */
+ struct ena_admin_host_info *host_info;
+ dma_addr_t host_info_dma_addr;
+ ena_mem_handle_t host_info_dma_handle;
+};
+
+/* Each ena_dev is a PCI function. */
+struct ena_com_dev {
+ struct ena_com_admin_queue admin_queue;
+ struct ena_com_aenq aenq;
+ struct ena_com_io_cq io_cq_queues[ENA_TOTAL_NUM_QUEUES];
+ struct ena_com_io_sq io_sq_queues[ENA_TOTAL_NUM_QUEUES];
+ void __iomem *reg_bar;
+ void __iomem *mem_bar;
+ void *dmadev;
+
+ enum ena_admin_placement_policy_type tx_mem_queue_type;
+
+ u16 stats_func; /* Selected function for extended statistic dump */
+ u16 stats_queue; /* Selected queue for extended statistic dump */
+
+ u16 tx_max_header_size;
+
+ struct ena_com_mmio_read mmio_read;
+
+ struct ena_rss rss;
+ u32 supported_features;
+ u32 dma_addr_bits;
+
+ struct ena_host_attribute host_attr;
+ bool adaptive_coalescing;
+ u16 intr_delay_resolution;
+ u32 intr_moder_tx_interval;
+ struct ena_intr_moder_entry *intr_moder_tbl;
+};
+
+struct ena_com_dev_get_features_ctx {
+ struct ena_admin_queue_feature_desc max_queues;
+ struct ena_admin_device_attr_feature_desc dev_attr;
+ struct ena_admin_feature_aenq_desc aenq;
+ struct ena_admin_feature_offload_desc offload;
+};
+
+typedef void (*ena_aenq_handler)(void *data,
+ struct ena_admin_aenq_entry *aenq_e);
+
+/* Holds aenq handlers. Indexed by AENQ event group */
+struct ena_aenq_handlers {
+ ena_aenq_handler handlers[ENA_MAX_HANDLERS];
+ ena_aenq_handler unimplemented_handler;
+};
+
+/*****************************************************************************/
+/*****************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/* ena_com_mmio_reg_read_request_init - Init the mmio reg read mechanism
+ * @ena_dev: ENA communication layer struct
+ *
+ * Initialize the register read mechanism.
+ *
+ * @note: This method must be the first stage in the initialization sequence.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_mmio_reg_read_request_init(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_mmio_read_mode - Enable/disable the mmio reg read mechanism
+ * @ena_dev: ENA communication layer struct
+ * @realess_supported: readless mode (enable/disable)
+ */
+void ena_com_set_mmio_read_mode(struct ena_com_dev *ena_dev,
+ bool readless_supported);
+
+/* ena_com_mmio_reg_read_request_write_dev_addr - Write the mmio reg read return
+ * value physical address.
+ * @ena_dev: ENA communication layer struct
+ */
+void ena_com_mmio_reg_read_request_write_dev_addr(struct ena_com_dev *ena_dev);
+
+/* ena_com_mmio_reg_read_request_destroy - Destroy the mmio reg read mechanism
+ * @ena_dev: ENA communication layer struct
+ */
+void ena_com_mmio_reg_read_request_destroy(struct ena_com_dev *ena_dev);
+
+/* ena_com_admin_init - Init the admin and the async queues
+ * @ena_dev: ENA communication layer struct
+ * @aenq_handlers: Those handlers to be called upon event.
+ * @init_spinlock: Indicate if this method should init the admin spinlock or
+ * the spinlock was init before (for example, in a case of FLR).
+ *
+ * Initialize the admin submission and completion queues.
+ * Initialize the asynchronous events notification queues.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_admin_init(struct ena_com_dev *ena_dev,
+ struct ena_aenq_handlers *aenq_handlers,
+ bool init_spinlock);
+
+/* ena_com_admin_destroy - Destroy the admin and the async events queues.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @note: Before calling this method, the caller must validate that the device
+ * won't send any additional admin completions/aenq.
+ * To achieve that, a FLR is recommended.
+ */
+void ena_com_admin_destroy(struct ena_com_dev *ena_dev);
+
+/* ena_com_dev_reset - Perform device FLR to the device.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_dev_reset(struct ena_com_dev *ena_dev);
+
+/* ena_com_create_io_queue - Create io queue.
+ * @ena_dev: ENA communication layer struct
+ * @qid - the caller virtual queue id.
+ * @direction - the queue direction (Rx/Tx)
+ * @mem_queue_type - Indicate if this queue is LLQ or regular queue
+ * (relevant only for Tx queue)
+ * @msix_vector - MSI-X vector
+ * @queue_size - queue size
+ *
+ * Create the submission and the completion queues for queue id - qid.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_create_io_queue(struct ena_com_dev *ena_dev, u16 qid,
+ enum queue_direction direction,
+ enum ena_admin_placement_policy_type mem_queue_type,
+ u32 msix_vector,
+ u16 queue_size);
+
+/* ena_com_admin_destroy - Destroy IO queue with the queue id - qid.
+ * @ena_dev: ENA communication layer struct
+ */
+void ena_com_destroy_io_queue(struct ena_com_dev *ena_dev, u16 qid);
+
+/* ena_com_get_io_handlers - Return the io queue handlers
+ * @ena_dev: ENA communication layer struct
+ * @qid - the caller virtual queue id.
+ * @io_sq - IO submission queue handler
+ * @io_cq - IO completion queue handler.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_get_io_handlers(struct ena_com_dev *ena_dev, u16 qid,
+ struct ena_com_io_sq **io_sq,
+ struct ena_com_io_cq **io_cq);
+
+/* ena_com_admin_aenq_enable - ENAble asynchronous event notifications
+ * @ena_dev: ENA communication layer struct
+ *
+ * After this method, aenq event can be received via AENQ.
+ */
+void ena_com_admin_aenq_enable(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_admin_running_state - Set the state of the admin queue
+ * @ena_dev: ENA communication layer struct
+ *
+ * Change the state of the admin queue (enable/disable)
+ */
+void ena_com_set_admin_running_state(struct ena_com_dev *ena_dev, bool state);
+
+/* ena_com_get_admin_running_state - Get the admin queue state
+ * @ena_dev: ENA communication layer struct
+ *
+ * Retrieve the state of the admin queue (enable/disable)
+ *
+ * @return - current polling mode (enable/disable)
+ */
+bool ena_com_get_admin_running_state(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_admin_polling_mode - Set the admin completion queue polling mode
+ * @ena_dev: ENA communication layer struct
+ * @polling: ENAble/Disable polling mode
+ *
+ * Set the admin completion mode.
+ */
+void ena_com_set_admin_polling_mode(struct ena_com_dev *ena_dev, bool polling);
+
+/* ena_com_set_admin_polling_mode - Get the admin completion queue polling mode
+ * @ena_dev: ENA communication layer struct
+ *
+ * Get the admin completion mode.
+ * If polling mode is on, ena_com_execute_admin_command will perform a
+ * polling on the admin completion queue for the commands completion,
+ * otherwise it will wait on wait event.
+ *
+ * @return state
+ */
+bool ena_com_get_ena_admin_polling_mode(struct ena_com_dev *ena_dev);
+
+/* ena_com_admin_q_comp_intr_handler - admin queue interrupt handler
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method go over the admin completion queue and wake up all the pending
+ * threads that wait on the commands wait event.
+ *
+ * @note: Should be called after MSI-X interrupt.
+ */
+void ena_com_admin_q_comp_intr_handler(struct ena_com_dev *ena_dev);
+
+/* ena_com_aenq_intr_handler - AENQ interrupt handler
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method go over the async event notification queue and call the proper
+ * aenq handler.
+ */
+void ena_com_aenq_intr_handler(struct ena_com_dev *dev, void *data);
+
+/* ena_com_abort_admin_commands - Abort all the outstanding admin commands.
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method aborts all the outstanding admin commands.
+ * The called should then call ena_com_wait_for_abort_completion to make sure
+ * all the commands were completed.
+ */
+void ena_com_abort_admin_commands(struct ena_com_dev *ena_dev);
+
+/* ena_com_wait_for_abort_completion - Wait for admin commands abort.
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method wait until all the outstanding admin commands will be completed.
+ */
+void ena_com_wait_for_abort_completion(struct ena_com_dev *ena_dev);
+
+/* ena_com_validate_version - Validate the device parameters
+ * @ena_dev: ENA communication layer struct
+ *
+ * This method validate the device parameters are the same as the saved
+ * parameters in ena_dev.
+ * This method is useful after device reset, to validate the device mac address
+ * and the device offloads are the same as before the reset.
+ *
+ * @return - 0 on success negative value otherwise.
+ */
+int ena_com_validate_version(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_link_params - Retrieve physical link parameters.
+ * @ena_dev: ENA communication layer struct
+ * @resp: Link parameters
+ *
+ * Retrieve the physical link parameters,
+ * like speed, auto-negotiation and full duplex support.
+ *
+ * @return - 0 on Success negative value otherwise.
+ */
+int ena_com_get_link_params(struct ena_com_dev *ena_dev,
+ struct ena_admin_get_feat_resp *resp);
+
+/* ena_com_get_dma_width - Retrieve physical dma address width the device
+ * supports.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Retrieve the maximum physical address bits the device can handle.
+ *
+ * @return: > 0 on Success and negative value otherwise.
+ */
+int ena_com_get_dma_width(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_aenq_config - Set aenq groups configurations
+ * @ena_dev: ENA communication layer struct
+ * @groups flag: bit fields flags of enum ena_admin_aenq_group.
+ *
+ * Configure which aenq event group the driver would like to receive.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_aenq_config(struct ena_com_dev *ena_dev, u32 groups_flag);
+
+/* ena_com_get_dev_attr_feat - Get device features
+ * @ena_dev: ENA communication layer struct
+ * @get_feat_ctx: returned context that contain the get features.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int
+ena_com_get_dev_attr_feat(struct ena_com_dev *ena_dev,
+ struct ena_com_dev_get_features_ctx *get_feat_ctx);
+
+/* ena_com_get_dev_basic_stats - Get device basic statistics
+ * @ena_dev: ENA communication layer struct
+ * @stats: stats return value
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_dev_basic_stats(struct ena_com_dev *ena_dev,
+ struct ena_admin_basic_stats *stats);
+
+/* ena_com_set_dev_mtu - Configure the device mtu.
+ * @ena_dev: ENA communication layer struct
+ * @mtu: mtu value
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_dev_mtu(struct ena_com_dev *ena_dev, int mtu);
+
+/* ena_com_get_offload_settings - Retrieve the device offloads capabilities
+ * @ena_dev: ENA communication layer struct
+ * @offlad: offload return value
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int
+ena_com_get_offload_settings(struct ena_com_dev *ena_dev,
+ struct ena_admin_feature_offload_desc *offload);
+
+/* ena_com_rss_init - Init RSS
+ * @ena_dev: ENA communication layer struct
+ * @log_size: indirection log size
+ *
+ * Allocate RSS/RFS resources.
+ * The caller then can configure rss using ena_com_set_hash_function,
+ * ena_com_set_hash_ctrl and ena_com_indirect_table_set.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_rss_init(struct ena_com_dev *ena_dev, u16 log_size);
+
+/* ena_com_rss_destroy - Destroy rss
+ * @ena_dev: ENA communication layer struct
+ *
+ * Free all the RSS/RFS resources.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_rss_destroy(struct ena_com_dev *ena_dev);
+
+/* ena_com_fill_hash_function - Fill RSS hash function
+ * @ena_dev: ENA communication layer struct
+ * @func: The hash function (Toeplitz or crc)
+ * @key: Hash key (for toeplitz hash)
+ * @key_len: key length (max length 10 DW)
+ * @init_val: initial value for the hash function
+ *
+ * Fill the ena_dev resources with the desire hash function, hash key, key_len
+ * and key initial value (if needed by the hash function).
+ * To flush the key into the device the caller should call
+ * ena_com_set_hash_function.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_fill_hash_function(struct ena_com_dev *ena_dev,
+ enum ena_admin_hash_functions func,
+ const u8 *key, u16 key_len, u32 init_val);
+
+/* ena_com_set_hash_function - Flush the hash function and it dependencies to
+ * the device.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Flush the hash function and it dependencies (key, key length and
+ * initial value) if needed.
+ *
+ * @note: Prior to this method the caller should call ena_com_fill_hash_function
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_hash_function(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_hash_function - Retrieve the hash function and the hash key
+ * from the device.
+ * @ena_dev: ENA communication layer struct
+ * @func: hash function
+ * @key: hash key
+ *
+ * Retrieve the hash function and the hash key from the device.
+ *
+ * @note: If the caller called ena_com_fill_hash_function but didn't flash
+ * it to the device, the new configuration will be lost.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_hash_function(struct ena_com_dev *ena_dev,
+ enum ena_admin_hash_functions *func,
+ u8 *key);
+
+/* ena_com_fill_hash_ctrl - Fill RSS hash control
+ * @ena_dev: ENA communication layer struct.
+ * @proto: The protocol to configure.
+ * @hash_fields: bit mask of ena_admin_flow_hash_fields
+ *
+ * Fill the ena_dev resources with the desire hash control (the ethernet
+ * fields that take part of the hash) for a specific protocol.
+ * To flush the hash control to the device, the caller should call
+ * ena_com_set_hash_ctrl.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_fill_hash_ctrl(struct ena_com_dev *ena_dev,
+ enum ena_admin_flow_hash_proto proto,
+ u16 hash_fields);
+
+/* ena_com_set_hash_ctrl - Flush the hash control resources to the device.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Flush the hash control (the ethernet fields that take part of the hash)
+ *
+ * @note: Prior to this method the caller should call ena_com_fill_hash_ctrl.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_hash_ctrl(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_hash_ctrl - Retrieve the hash control from the device.
+ * @ena_dev: ENA communication layer struct
+ * @proto: The protocol to retrieve.
+ * @fields: bit mask of ena_admin_flow_hash_fields.
+ *
+ * Retrieve the hash control from the device.
+ *
+ * @note, If the caller called ena_com_fill_hash_ctrl but didn't flash
+ * it to the device, the new configuration will be lost.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_get_hash_ctrl(struct ena_com_dev *ena_dev,
+ enum ena_admin_flow_hash_proto proto,
+ u16 *fields);
+
+/* ena_com_set_default_hash_ctrl - Set the hash control to a default
+ * configuration.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Fill the ena_dev resources with the default hash control configuration.
+ * To flush the hash control to the device, the caller should call
+ * ena_com_set_hash_ctrl.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_default_hash_ctrl(struct ena_com_dev *ena_dev);
+
+/* ena_com_indirect_table_fill_entry - Fill a single entry in the RSS
+ * indirection table
+ * @ena_dev: ENA communication layer struct.
+ * @entry_idx - indirection table entry.
+ * @entry_value - redirection value
+ *
+ * Fill a single entry of the RSS indirection table in the ena_dev resources.
+ * To flush the indirection table to the device, the called should call
+ * ena_com_indirect_table_set.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_indirect_table_fill_entry(struct ena_com_dev *ena_dev,
+ u16 entry_idx, u16 entry_value);
+
+/* ena_com_indirect_table_set - Flush the indirection table to the device.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Flush the indirection hash control to the device.
+ * Prior to this method the caller should call ena_com_indirect_table_fill_entry
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_indirect_table_set(struct ena_com_dev *ena_dev);
+
+/* ena_com_indirect_table_get - Retrieve the indirection table from the device.
+ * @ena_dev: ENA communication layer struct
+ * @ind_tbl: indirection table
+ *
+ * Retrieve the RSS indirection table from the device.
+ *
+ * @note: If the caller called ena_com_indirect_table_fill_entry but didn't
+ * flash it to the device, the new configuration will be lost.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_indirect_table_get(struct ena_com_dev *ena_dev, u32 *ind_tbl);
+
+/* ena_com_allocate_host_attribute - Allocate host attributes resources.
+ * @ena_dev: ENA communication layer struct
+ * @debug_area_size: Debug aread size
+ *
+ * Allocate host info and debug area.
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_allocate_host_attribute(struct ena_com_dev *ena_dev,
+ u32 debug_area_size);
+
+/* ena_com_allocate_host_attribute - Free the host attributes resources.
+ * @ena_dev: ENA communication layer struct
+ *
+ * Free the allocate host info and debug area.
+ */
+void ena_com_delete_host_attribute(struct ena_com_dev *ena_dev);
+
+/* ena_com_set_host_attributes - Update the device with the host
+ * attributes base address.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return: 0 on Success and negative value otherwise.
+ */
+int ena_com_set_host_attributes(struct ena_com_dev *ena_dev);
+
+/* ena_com_create_io_cq - Create io completion queue.
+ * @ena_dev: ENA communication layer struct
+ * @io_cq - io completion queue handler
+
+ * Create IO completion queue.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_create_io_cq(struct ena_com_dev *ena_dev,
+ struct ena_com_io_cq *io_cq);
+
+/* ena_com_destroy_io_cq - Destroy io completion queue.
+ * @ena_dev: ENA communication layer struct
+ * @io_cq - io completion queue handler
+
+ * Destroy IO completion queue.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_destroy_io_cq(struct ena_com_dev *ena_dev,
+ struct ena_com_io_cq *io_cq);
+
+/* ena_com_execute_admin_command - Execute admin command
+ * @admin_queue: admin queue.
+ * @cmd: the admin command to execute.
+ * @cmd_size: the command size.
+ * @cmd_completion: command completion return value.
+ * @cmd_comp_size: command completion size.
+
+ * Submit an admin command and then wait until the device will return a
+ * completion.
+ * The completion will be copyed into cmd_comp.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_execute_admin_command(struct ena_com_admin_queue *admin_queue,
+ struct ena_admin_aq_entry *cmd,
+ size_t cmd_size,
+ struct ena_admin_acq_entry *cmd_comp,
+ size_t cmd_comp_size);
+
+/* ena_com_init_interrupt_moderation - Init interrupt moderation
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int ena_com_init_interrupt_moderation(struct ena_com_dev *ena_dev);
+
+/* ena_com_destroy_interrupt_moderation - Destroy interrupt moderation resources
+ * @ena_dev: ENA communication layer struct
+ */
+void ena_com_destroy_interrupt_moderation(struct ena_com_dev *ena_dev);
+
+/* ena_com_interrupt_moderation_supported - Return if interrupt moderation
+ * capability is supported by the device.
+ *
+ * @return - supported or not.
+ */
+bool ena_com_interrupt_moderation_supported(struct ena_com_dev *ena_dev);
+
+/* ena_com_config_default_interrupt_moderation_table - Restore the interrupt
+ * moderation table back to the default parameters.
+ * @ena_dev: ENA communication layer struct
+ */
+void
+ena_com_config_default_interrupt_moderation_table(struct ena_com_dev *ena_dev);
+
+/* ena_com_update_nonadaptive_moderation_interval_tx - Update the
+ * non-adaptive interval in Tx direction.
+ * @ena_dev: ENA communication layer struct
+ * @tx_coalesce_usecs: Interval in usec.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int
+ena_com_update_nonadaptive_moderation_interval_tx(struct ena_com_dev *ena_dev,
+ u32 tx_coalesce_usecs);
+
+/* ena_com_update_nonadaptive_moderation_interval_rx - Update the
+ * non-adaptive interval in Rx direction.
+ * @ena_dev: ENA communication layer struct
+ * @rx_coalesce_usecs: Interval in usec.
+ *
+ * @return - 0 on success, negative value on failure.
+ */
+int
+ena_com_update_nonadaptive_moderation_interval_rx(struct ena_com_dev *ena_dev,
+ u32 rx_coalesce_usecs);
+
+/* ena_com_get_nonadaptive_moderation_interval_tx - Retrieve the
+ * non-adaptive interval in Tx direction.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - interval in usec
+ */
+unsigned int
+ena_com_get_nonadaptive_moderation_interval_tx(struct ena_com_dev *ena_dev);
+
+/* ena_com_get_nonadaptive_moderation_interval_rx - Retrieve the
+ * non-adaptive interval in Rx direction.
+ * @ena_dev: ENA communication layer struct
+ *
+ * @return - interval in usec
+ */
+unsigned int
+ena_com_get_nonadaptive_moderation_interval_rx(struct ena_com_dev *ena_dev);
+
+/* ena_com_init_intr_moderation_entry - Update a single entry in the interrupt
+ * moderation table.
+ * @ena_dev: ENA communication layer struct
+ * @level: Interrupt moderation table level
+ * @entry: Entry value
+ *
+ * Update a single entry in the interrupt moderation table.
+ */
+void ena_com_init_intr_moderation_entry(struct ena_com_dev *ena_dev,
+ enum ena_intr_moder_level level,
+ struct ena_intr_moder_entry *entry);
+
+/* ena_com_get_intr_moderation_entry - Init ena_intr_moder_entry.
+ * @ena_dev: ENA communication layer struct
+ * @level: Interrupt moderation table level
+ * @entry: Entry to fill.
+ *
+ * Initialize the entry according to the adaptive interrupt moderation table.
+ */
+void ena_com_get_intr_moderation_entry(struct ena_com_dev *ena_dev,
+ enum ena_intr_moder_level level,
+ struct ena_intr_moder_entry *entry);
+
+static inline bool
+ena_com_get_adaptive_moderation_enabled(struct ena_com_dev *ena_dev)
+{
+ return ena_dev->adaptive_coalescing;
+}
+
+static inline void
+ena_com_enable_adaptive_moderation(struct ena_com_dev *ena_dev)
+{
+ ena_dev->adaptive_coalescing = true;
+}
+
+static inline void
+ena_com_disable_adaptive_moderation(struct ena_com_dev *ena_dev)
+{
+ ena_dev->adaptive_coalescing = false;
+}
+
+/* ena_com_calculate_interrupt_delay - Calculate new interrupt delay
+ * @ena_dev: ENA communication layer struct
+ * @pkts: Number of packets since the last update
+ * @bytes: Number of bytes received since the last update.
+ * @smoothed_interval: Returned interval
+ * @moder_tbl_idx: Current table level as input update new level as return
+ * value.
+ */
+static inline void
+ena_com_calculate_interrupt_delay(struct ena_com_dev *ena_dev,
+ unsigned int pkts,
+ unsigned int bytes,
+ unsigned int *smoothed_interval,
+ unsigned int *moder_tbl_idx)
+{
+ enum ena_intr_moder_level curr_moder_idx, new_moder_idx;
+ struct ena_intr_moder_entry *curr_moder_entry;
+ struct ena_intr_moder_entry *pred_moder_entry;
+ struct ena_intr_moder_entry *new_moder_entry;
+ struct ena_intr_moder_entry *intr_moder_tbl = ena_dev->intr_moder_tbl;
+ unsigned int interval;
+
+ /* We apply adaptive moderation on Rx path only.
+ * Tx uses static interrupt moderation.
+ */
+ if (!pkts || !bytes)
+ /* Tx interrupt, or spurious interrupt,
+ * in both cases we just use same delay values
+ */
+ return;
+
+ curr_moder_idx = (enum ena_intr_moder_level)*moder_tbl_idx;
+ if (unlikely(curr_moder_idx >= ENA_INTR_MAX_NUM_OF_LEVELS)) {
+ ena_trc_err("Wrong moderation index %u\n", curr_moder_idx);
+ return;
+ }
+
+ curr_moder_entry = &intr_moder_tbl[curr_moder_idx];
+ new_moder_idx = curr_moder_idx;
+
+ if (curr_moder_idx == ENA_INTR_MODER_LOWEST) {
+ if ((pkts > curr_moder_entry->pkts_per_interval) ||
+ (bytes > curr_moder_entry->bytes_per_interval))
+ new_moder_idx = (enum ena_intr_moder_level)(curr_moder_idx + 1);
+ } else {
+ pred_moder_entry = &intr_moder_tbl[curr_moder_idx - 1];
+
+ if ((pkts <= pred_moder_entry->pkts_per_interval) ||
+ (bytes <= pred_moder_entry->bytes_per_interval))
+ new_moder_idx = (enum ena_intr_moder_level)(curr_moder_idx - 1);
+ else if ((pkts > curr_moder_entry->pkts_per_interval) ||
+ (bytes > curr_moder_entry->bytes_per_interval)) {
+ if (curr_moder_idx != ENA_INTR_MODER_HIGHEST)
+ new_moder_idx = (enum ena_intr_moder_level)(curr_moder_idx + 1);
+ }
+ }
+ new_moder_entry = &intr_moder_tbl[new_moder_idx];
+
+ interval = new_moder_entry->intr_moder_interval;
+ *smoothed_interval = (
+ (interval * ENA_INTR_DELAY_NEW_VALUE_WEIGHT +
+ ENA_INTR_DELAY_OLD_VALUE_WEIGHT * (*smoothed_interval)) + 5) /
+ 10;
+
+ *moder_tbl_idx = new_moder_idx;
+}
+
+/* ena_com_update_intr_reg - Prepare interrupt register
+ * @intr_reg: interrupt register to update.
+ * @rx_delay_interval: Rx interval in usecs
+ * @tx_delay_interval: Tx interval in usecs
+ * @unmask: unask enable/disable
+ *
+ * Prepare interrupt update register with the supplied parameters.
+ */
+static inline void ena_com_update_intr_reg(struct ena_eth_io_intr_reg *intr_reg,
+ u32 rx_delay_interval,
+ u32 tx_delay_interval,
+ bool unmask)
+{
+ intr_reg->intr_control = 0;
+ intr_reg->intr_control |= rx_delay_interval &
+ ENA_ETH_IO_INTR_REG_RX_INTR_DELAY_MASK;
+
+ intr_reg->intr_control |=
+ (tx_delay_interval << ENA_ETH_IO_INTR_REG_TX_INTR_DELAY_SHIFT)
+ & ENA_ETH_IO_INTR_REG_RX_INTR_DELAY_MASK;
+
+ if (unmask)
+ intr_reg->intr_control |= ENA_ETH_IO_INTR_REG_INTR_UNMASK_MASK;
+}
+
+int ena_com_get_dev_extended_stats(struct ena_com_dev *ena_dev, char *buff,
+ u32 len);
+
+int ena_com_extended_stats_set_func_queue(struct ena_com_dev *ena_dev,
+ u32 funct_queue);
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+#endif /* !(ENA_COM) */
Code Review / deb_dpdk.git / blobdiff