--- /dev/null
+/*******************************************************************************
+
+Copyright (c) 2013 - 2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "fm10k_common.h"
+
+/**
+ * fm10k_fifo_init - Initialize a message FIFO
+ * @fifo: pointer to FIFO
+ * @buffer: pointer to memory to be used to store FIFO
+ * @size: maximum message size to store in FIFO, must be 2^n - 1
+ **/
+STATIC void fm10k_fifo_init(struct fm10k_mbx_fifo *fifo, u32 *buffer, u16 size)
+{
+ fifo->buffer = buffer;
+ fifo->size = size;
+ fifo->head = 0;
+ fifo->tail = 0;
+}
+
+/**
+ * fm10k_fifo_used - Retrieve used space in FIFO
+ * @fifo: pointer to FIFO
+ *
+ * This function returns the number of DWORDs used in the FIFO
+ **/
+STATIC u16 fm10k_fifo_used(struct fm10k_mbx_fifo *fifo)
+{
+ return fifo->tail - fifo->head;
+}
+
+/**
+ * fm10k_fifo_unused - Retrieve unused space in FIFO
+ * @fifo: pointer to FIFO
+ *
+ * This function returns the number of unused DWORDs in the FIFO
+ **/
+STATIC u16 fm10k_fifo_unused(struct fm10k_mbx_fifo *fifo)
+{
+ return fifo->size + fifo->head - fifo->tail;
+}
+
+/**
+ * fm10k_fifo_empty - Test to verify if FIFO is empty
+ * @fifo: pointer to FIFO
+ *
+ * This function returns true if the FIFO is empty, else false
+ **/
+STATIC bool fm10k_fifo_empty(struct fm10k_mbx_fifo *fifo)
+{
+ return fifo->head == fifo->tail;
+}
+
+/**
+ * fm10k_fifo_head_offset - returns indices of head with given offset
+ * @fifo: pointer to FIFO
+ * @offset: offset to add to head
+ *
+ * This function returns the indices into the FIFO based on head + offset
+ **/
+STATIC u16 fm10k_fifo_head_offset(struct fm10k_mbx_fifo *fifo, u16 offset)
+{
+ return (fifo->head + offset) & (fifo->size - 1);
+}
+
+/**
+ * fm10k_fifo_tail_offset - returns indices of tail with given offset
+ * @fifo: pointer to FIFO
+ * @offset: offset to add to tail
+ *
+ * This function returns the indices into the FIFO based on tail + offset
+ **/
+STATIC u16 fm10k_fifo_tail_offset(struct fm10k_mbx_fifo *fifo, u16 offset)
+{
+ return (fifo->tail + offset) & (fifo->size - 1);
+}
+
+/**
+ * fm10k_fifo_head_len - Retrieve length of first message in FIFO
+ * @fifo: pointer to FIFO
+ *
+ * This function returns the size of the first message in the FIFO
+ **/
+STATIC u16 fm10k_fifo_head_len(struct fm10k_mbx_fifo *fifo)
+{
+ u32 *head = fifo->buffer + fm10k_fifo_head_offset(fifo, 0);
+
+ /* verify there is at least 1 DWORD in the fifo so *head is valid */
+ if (fm10k_fifo_empty(fifo))
+ return 0;
+
+ /* retieve the message length */
+ return FM10K_TLV_DWORD_LEN(*head);
+}
+
+/**
+ * fm10k_fifo_head_drop - Drop the first message in FIFO
+ * @fifo: pointer to FIFO
+ *
+ * This function returns the size of the message dropped from the FIFO
+ **/
+STATIC u16 fm10k_fifo_head_drop(struct fm10k_mbx_fifo *fifo)
+{
+ u16 len = fm10k_fifo_head_len(fifo);
+
+ /* update head so it is at the start of next frame */
+ fifo->head += len;
+
+ return len;
+}
+
+/**
+ * fm10k_fifo_drop_all - Drop all messages in FIFO
+ * @fifo: pointer to FIFO
+ *
+ * This function resets the head pointer to drop all messages in the FIFO and
+ * ensure the FIFO is empty.
+ **/
+STATIC void fm10k_fifo_drop_all(struct fm10k_mbx_fifo *fifo)
+{
+ fifo->head = fifo->tail;
+}
+
+/**
+ * fm10k_mbx_index_len - Convert a head/tail index into a length value
+ * @mbx: pointer to mailbox
+ * @head: head index
+ * @tail: head index
+ *
+ * This function takes the head and tail index and determines the length
+ * of the data indicated by this pair.
+ **/
+STATIC u16 fm10k_mbx_index_len(struct fm10k_mbx_info *mbx, u16 head, u16 tail)
+{
+ u16 len = tail - head;
+
+ /* we wrapped so subtract 2, one for index 0, one for all 1s index */
+ if (len > tail)
+ len -= 2;
+
+ return len & ((mbx->mbmem_len << 1) - 1);
+}
+
+/**
+ * fm10k_mbx_tail_add - Determine new tail value with added offset
+ * @mbx: pointer to mailbox
+ * @offset: length to add to tail offset
+ *
+ * This function takes the local tail index and recomputes it for
+ * a given length added as an offset.
+ **/
+STATIC u16 fm10k_mbx_tail_add(struct fm10k_mbx_info *mbx, u16 offset)
+{
+ u16 tail = (mbx->tail + offset + 1) & ((mbx->mbmem_len << 1) - 1);
+
+ /* add/sub 1 because we cannot have offset 0 or all 1s */
+ return (tail > mbx->tail) ? --tail : ++tail;
+}
+
+/**
+ * fm10k_mbx_tail_sub - Determine new tail value with subtracted offset
+ * @mbx: pointer to mailbox
+ * @offset: length to add to tail offset
+ *
+ * This function takes the local tail index and recomputes it for
+ * a given length added as an offset.
+ **/
+STATIC u16 fm10k_mbx_tail_sub(struct fm10k_mbx_info *mbx, u16 offset)
+{
+ u16 tail = (mbx->tail - offset - 1) & ((mbx->mbmem_len << 1) - 1);
+
+ /* sub/add 1 because we cannot have offset 0 or all 1s */
+ return (tail < mbx->tail) ? ++tail : --tail;
+}
+
+/**
+ * fm10k_mbx_head_add - Determine new head value with added offset
+ * @mbx: pointer to mailbox
+ * @offset: length to add to head offset
+ *
+ * This function takes the local head index and recomputes it for
+ * a given length added as an offset.
+ **/
+STATIC u16 fm10k_mbx_head_add(struct fm10k_mbx_info *mbx, u16 offset)
+{
+ u16 head = (mbx->head + offset + 1) & ((mbx->mbmem_len << 1) - 1);
+
+ /* add/sub 1 because we cannot have offset 0 or all 1s */
+ return (head > mbx->head) ? --head : ++head;
+}
+
+/**
+ * fm10k_mbx_head_sub - Determine new head value with subtracted offset
+ * @mbx: pointer to mailbox
+ * @offset: length to add to head offset
+ *
+ * This function takes the local head index and recomputes it for
+ * a given length added as an offset.
+ **/
+STATIC u16 fm10k_mbx_head_sub(struct fm10k_mbx_info *mbx, u16 offset)
+{
+ u16 head = (mbx->head - offset - 1) & ((mbx->mbmem_len << 1) - 1);
+
+ /* sub/add 1 because we cannot have offset 0 or all 1s */
+ return (head < mbx->head) ? ++head : --head;
+}
+
+/**
+ * fm10k_mbx_pushed_tail_len - Retrieve the length of message being pushed
+ * @mbx: pointer to mailbox
+ *
+ * This function will return the length of the message currently being
+ * pushed onto the tail of the Rx queue.
+ **/
+STATIC u16 fm10k_mbx_pushed_tail_len(struct fm10k_mbx_info *mbx)
+{
+ u32 *tail = mbx->rx.buffer + fm10k_fifo_tail_offset(&mbx->rx, 0);
+
+ /* pushed tail is only valid if pushed is set */
+ if (!mbx->pushed)
+ return 0;
+
+ return FM10K_TLV_DWORD_LEN(*tail);
+}
+
+/**
+ * fm10k_fifo_write_copy - pulls data off of msg and places it in FIFO
+ * @fifo: pointer to FIFO
+ * @msg: message array to populate
+ * @tail_offset: additional offset to add to tail pointer
+ * @len: length of FIFO to copy into message header
+ *
+ * This function will take a message and copy it into a section of the
+ * FIFO. In order to get something into a location other than just
+ * the tail you can use tail_offset to adjust the pointer.
+ **/
+STATIC void fm10k_fifo_write_copy(struct fm10k_mbx_fifo *fifo,
+ const u32 *msg, u16 tail_offset, u16 len)
+{
+ u16 end = fm10k_fifo_tail_offset(fifo, tail_offset);
+ u32 *tail = fifo->buffer + end;
+
+ /* track when we should cross the end of the FIFO */
+ end = fifo->size - end;
+
+ /* copy end of message before start of message */
+ if (end < len)
+ memcpy(fifo->buffer, msg + end, (len - end) << 2);
+ else
+ end = len;
+
+ /* Copy remaining message into Tx FIFO */
+ memcpy(tail, msg, end << 2);
+}
+
+/**
+ * fm10k_fifo_enqueue - Enqueues the message to the tail of the FIFO
+ * @fifo: pointer to FIFO
+ * @msg: message array to read
+ *
+ * This function enqueues a message up to the size specified by the length
+ * contained in the first DWORD of the message and will place at the tail
+ * of the FIFO. It will return 0 on success, or a negative value on error.
+ **/
+STATIC s32 fm10k_fifo_enqueue(struct fm10k_mbx_fifo *fifo, const u32 *msg)
+{
+ u16 len = FM10K_TLV_DWORD_LEN(*msg);
+
+ DEBUGFUNC("fm10k_fifo_enqueue");
+
+ /* verify parameters */
+ if (len > fifo->size)
+ return FM10K_MBX_ERR_SIZE;
+
+ /* verify there is room for the message */
+ if (len > fm10k_fifo_unused(fifo))
+ return FM10K_MBX_ERR_NO_SPACE;
+
+ /* Copy message into FIFO */
+ fm10k_fifo_write_copy(fifo, msg, 0, len);
+
+ /* memory barrier to guarantee FIFO is written before tail update */
+ FM10K_WMB();
+
+ /* Update Tx FIFO tail */
+ fifo->tail += len;
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_validate_msg_size - Validate incoming message based on size
+ * @mbx: pointer to mailbox
+ * @len: length of data pushed onto buffer
+ *
+ * This function analyzes the frame and will return a non-zero value when
+ * the start of a message larger than the mailbox is detected.
+ **/
+STATIC u16 fm10k_mbx_validate_msg_size(struct fm10k_mbx_info *mbx, u16 len)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->rx;
+ u16 total_len = 0, msg_len;
+ u32 *msg;
+
+ DEBUGFUNC("fm10k_mbx_validate_msg_size");
+
+ /* length should include previous amounts pushed */
+ len += mbx->pushed;
+
+ /* offset in message is based off of current message size */
+ do {
+ msg = fifo->buffer + fm10k_fifo_tail_offset(fifo, total_len);
+ msg_len = FM10K_TLV_DWORD_LEN(*msg);
+ total_len += msg_len;
+ } while (total_len < len);
+
+ /* message extends out of pushed section, but fits in FIFO */
+ if ((len < total_len) && (msg_len <= mbx->max_size))
+ return 0;
+
+ /* return length of invalid section */
+ return (len < total_len) ? len : (len - total_len);
+}
+
+/**
+ * fm10k_mbx_write_copy - pulls data off of Tx FIFO and places it in mbmem
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will take a section of the Tx FIFO and copy it into the
+ * mailbox memory. The offset in mbmem is based on the lower bits of the
+ * tail and len determines the length to copy.
+ **/
+STATIC void fm10k_mbx_write_copy(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->tx;
+ u32 mbmem = mbx->mbmem_reg;
+ u32 *head = fifo->buffer;
+ u16 end, len, tail, mask;
+
+ DEBUGFUNC("fm10k_mbx_write_copy");
+
+ if (!mbx->tail_len)
+ return;
+
+ /* determine data length and mbmem tail index */
+ mask = mbx->mbmem_len - 1;
+ len = mbx->tail_len;
+ tail = fm10k_mbx_tail_sub(mbx, len);
+ if (tail > mask)
+ tail++;
+
+ /* determine offset in the ring */
+ end = fm10k_fifo_head_offset(fifo, mbx->pulled);
+ head += end;
+
+ /* memory barrier to guarantee data is ready to be read */
+ FM10K_RMB();
+
+ /* Copy message from Tx FIFO */
+ for (end = fifo->size - end; len; head = fifo->buffer) {
+ do {
+ /* adjust tail to match offset for FIFO */
+ tail &= mask;
+ if (!tail)
+ tail++;
+
+ mbx->tx_mbmem_pulled++;
+
+ /* write message to hardware FIFO */
+ FM10K_WRITE_MBX(hw, mbmem + tail++, *(head++));
+ } while (--len && --end);
+ }
+}
+
+/**
+ * fm10k_mbx_pull_head - Pulls data off of head of Tx FIFO
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @head: acknowledgement number last received
+ *
+ * This function will push the tail index forward based on the remote
+ * head index. It will then pull up to mbmem_len DWORDs off of the
+ * head of the FIFO and will place it in the MBMEM registers
+ * associated with the mailbox.
+ **/
+STATIC void fm10k_mbx_pull_head(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx, u16 head)
+{
+ u16 mbmem_len, len, ack = fm10k_mbx_index_len(mbx, head, mbx->tail);
+ struct fm10k_mbx_fifo *fifo = &mbx->tx;
+
+ /* update number of bytes pulled and update bytes in transit */
+ mbx->pulled += mbx->tail_len - ack;
+
+ /* determine length of data to pull, reserve space for mbmem header */
+ mbmem_len = mbx->mbmem_len - 1;
+ len = fm10k_fifo_used(fifo) - mbx->pulled;
+ if (len > mbmem_len)
+ len = mbmem_len;
+
+ /* update tail and record number of bytes in transit */
+ mbx->tail = fm10k_mbx_tail_add(mbx, len - ack);
+ mbx->tail_len = len;
+
+ /* drop pulled messages from the FIFO */
+ for (len = fm10k_fifo_head_len(fifo);
+ len && (mbx->pulled >= len);
+ len = fm10k_fifo_head_len(fifo)) {
+ mbx->pulled -= fm10k_fifo_head_drop(fifo);
+ mbx->tx_messages++;
+ mbx->tx_dwords += len;
+ }
+
+ /* Copy message out from the Tx FIFO */
+ fm10k_mbx_write_copy(hw, mbx);
+}
+
+/**
+ * fm10k_mbx_read_copy - pulls data off of mbmem and places it in Rx FIFO
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will take a section of the mailbox memory and copy it
+ * into the Rx FIFO. The offset is based on the lower bits of the
+ * head and len determines the length to copy.
+ **/
+STATIC void fm10k_mbx_read_copy(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->rx;
+ u32 mbmem = mbx->mbmem_reg ^ mbx->mbmem_len;
+ u32 *tail = fifo->buffer;
+ u16 end, len, head;
+
+ DEBUGFUNC("fm10k_mbx_read_copy");
+
+ /* determine data length and mbmem head index */
+ len = mbx->head_len;
+ head = fm10k_mbx_head_sub(mbx, len);
+ if (head >= mbx->mbmem_len)
+ head++;
+
+ /* determine offset in the ring */
+ end = fm10k_fifo_tail_offset(fifo, mbx->pushed);
+ tail += end;
+
+ /* Copy message into Rx FIFO */
+ for (end = fifo->size - end; len; tail = fifo->buffer) {
+ do {
+ /* adjust head to match offset for FIFO */
+ head &= mbx->mbmem_len - 1;
+ if (!head)
+ head++;
+
+ mbx->rx_mbmem_pushed++;
+
+ /* read message from hardware FIFO */
+ *(tail++) = FM10K_READ_MBX(hw, mbmem + head++);
+ } while (--len && --end);
+ }
+
+ /* memory barrier to guarantee FIFO is written before tail update */
+ FM10K_WMB();
+}
+
+/**
+ * fm10k_mbx_push_tail - Pushes up to 15 DWORDs on to tail of FIFO
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @tail: tail index of message
+ *
+ * This function will first validate the tail index and size for the
+ * incoming message. It then updates the acknowledgment number and
+ * copies the data into the FIFO. It will return the number of messages
+ * dequeued on success and a negative value on error.
+ **/
+STATIC s32 fm10k_mbx_push_tail(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx,
+ u16 tail)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->rx;
+ u16 len, seq = fm10k_mbx_index_len(mbx, mbx->head, tail);
+
+ DEBUGFUNC("fm10k_mbx_push_tail");
+
+ /* determine length of data to push */
+ len = fm10k_fifo_unused(fifo) - mbx->pushed;
+ if (len > seq)
+ len = seq;
+
+ /* update head and record bytes received */
+ mbx->head = fm10k_mbx_head_add(mbx, len);
+ mbx->head_len = len;
+
+ /* nothing to do if there is no data */
+ if (!len)
+ return FM10K_SUCCESS;
+
+ /* Copy msg into Rx FIFO */
+ fm10k_mbx_read_copy(hw, mbx);
+
+ /* determine if there are any invalid lengths in message */
+ if (fm10k_mbx_validate_msg_size(mbx, len))
+ return FM10K_MBX_ERR_SIZE;
+
+ /* Update pushed */
+ mbx->pushed += len;
+
+ /* flush any completed messages */
+ for (len = fm10k_mbx_pushed_tail_len(mbx);
+ len && (mbx->pushed >= len);
+ len = fm10k_mbx_pushed_tail_len(mbx)) {
+ fifo->tail += len;
+ mbx->pushed -= len;
+ mbx->rx_messages++;
+ mbx->rx_dwords += len;
+ }
+
+ return FM10K_SUCCESS;
+}
+
+/* pre-generated data for generating the CRC based on the poly 0xAC9A. */
+static const u16 fm10k_crc_16b_table[256] = {
+ 0x0000, 0x7956, 0xF2AC, 0x8BFA, 0xBC6D, 0xC53B, 0x4EC1, 0x3797,
+ 0x21EF, 0x58B9, 0xD343, 0xAA15, 0x9D82, 0xE4D4, 0x6F2E, 0x1678,
+ 0x43DE, 0x3A88, 0xB172, 0xC824, 0xFFB3, 0x86E5, 0x0D1F, 0x7449,
+ 0x6231, 0x1B67, 0x909D, 0xE9CB, 0xDE5C, 0xA70A, 0x2CF0, 0x55A6,
+ 0x87BC, 0xFEEA, 0x7510, 0x0C46, 0x3BD1, 0x4287, 0xC97D, 0xB02B,
+ 0xA653, 0xDF05, 0x54FF, 0x2DA9, 0x1A3E, 0x6368, 0xE892, 0x91C4,
+ 0xC462, 0xBD34, 0x36CE, 0x4F98, 0x780F, 0x0159, 0x8AA3, 0xF3F5,
+ 0xE58D, 0x9CDB, 0x1721, 0x6E77, 0x59E0, 0x20B6, 0xAB4C, 0xD21A,
+ 0x564D, 0x2F1B, 0xA4E1, 0xDDB7, 0xEA20, 0x9376, 0x188C, 0x61DA,
+ 0x77A2, 0x0EF4, 0x850E, 0xFC58, 0xCBCF, 0xB299, 0x3963, 0x4035,
+ 0x1593, 0x6CC5, 0xE73F, 0x9E69, 0xA9FE, 0xD0A8, 0x5B52, 0x2204,
+ 0x347C, 0x4D2A, 0xC6D0, 0xBF86, 0x8811, 0xF147, 0x7ABD, 0x03EB,
+ 0xD1F1, 0xA8A7, 0x235D, 0x5A0B, 0x6D9C, 0x14CA, 0x9F30, 0xE666,
+ 0xF01E, 0x8948, 0x02B2, 0x7BE4, 0x4C73, 0x3525, 0xBEDF, 0xC789,
+ 0x922F, 0xEB79, 0x6083, 0x19D5, 0x2E42, 0x5714, 0xDCEE, 0xA5B8,
+ 0xB3C0, 0xCA96, 0x416C, 0x383A, 0x0FAD, 0x76FB, 0xFD01, 0x8457,
+ 0xAC9A, 0xD5CC, 0x5E36, 0x2760, 0x10F7, 0x69A1, 0xE25B, 0x9B0D,
+ 0x8D75, 0xF423, 0x7FD9, 0x068F, 0x3118, 0x484E, 0xC3B4, 0xBAE2,
+ 0xEF44, 0x9612, 0x1DE8, 0x64BE, 0x5329, 0x2A7F, 0xA185, 0xD8D3,
+ 0xCEAB, 0xB7FD, 0x3C07, 0x4551, 0x72C6, 0x0B90, 0x806A, 0xF93C,
+ 0x2B26, 0x5270, 0xD98A, 0xA0DC, 0x974B, 0xEE1D, 0x65E7, 0x1CB1,
+ 0x0AC9, 0x739F, 0xF865, 0x8133, 0xB6A4, 0xCFF2, 0x4408, 0x3D5E,
+ 0x68F8, 0x11AE, 0x9A54, 0xE302, 0xD495, 0xADC3, 0x2639, 0x5F6F,
+ 0x4917, 0x3041, 0xBBBB, 0xC2ED, 0xF57A, 0x8C2C, 0x07D6, 0x7E80,
+ 0xFAD7, 0x8381, 0x087B, 0x712D, 0x46BA, 0x3FEC, 0xB416, 0xCD40,
+ 0xDB38, 0xA26E, 0x2994, 0x50C2, 0x6755, 0x1E03, 0x95F9, 0xECAF,
+ 0xB909, 0xC05F, 0x4BA5, 0x32F3, 0x0564, 0x7C32, 0xF7C8, 0x8E9E,
+ 0x98E6, 0xE1B0, 0x6A4A, 0x131C, 0x248B, 0x5DDD, 0xD627, 0xAF71,
+ 0x7D6B, 0x043D, 0x8FC7, 0xF691, 0xC106, 0xB850, 0x33AA, 0x4AFC,
+ 0x5C84, 0x25D2, 0xAE28, 0xD77E, 0xE0E9, 0x99BF, 0x1245, 0x6B13,
+ 0x3EB5, 0x47E3, 0xCC19, 0xB54F, 0x82D8, 0xFB8E, 0x7074, 0x0922,
+ 0x1F5A, 0x660C, 0xEDF6, 0x94A0, 0xA337, 0xDA61, 0x519B, 0x28CD };
+
+/**
+ * fm10k_crc_16b - Generate a 16 bit CRC for a region of 16 bit data
+ * @data: pointer to data to process
+ * @seed: seed value for CRC
+ * @len: length measured in 16 bits words
+ *
+ * This function will generate a CRC based on the polynomial 0xAC9A and
+ * whatever value is stored in the seed variable. Note that this
+ * value inverts the local seed and the result in order to capture all
+ * leading and trailing zeros.
+ */
+STATIC u16 fm10k_crc_16b(const u32 *data, u16 seed, u16 len)
+{
+ u32 result = seed;
+
+ while (len--) {
+ result ^= *(data++);
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+
+ if (!(len--))
+ break;
+
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+ result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF];
+ }
+
+ return (u16)result;
+}
+
+/**
+ * fm10k_fifo_crc - generate a CRC based off of FIFO data
+ * @fifo: pointer to FIFO
+ * @offset: offset point for start of FIFO
+ * @len: number of DWORDS words to process
+ * @seed: seed value for CRC
+ *
+ * This function generates a CRC for some region of the FIFO
+ **/
+STATIC u16 fm10k_fifo_crc(struct fm10k_mbx_fifo *fifo, u16 offset,
+ u16 len, u16 seed)
+{
+ u32 *data = fifo->buffer + offset;
+
+ /* track when we should cross the end of the FIFO */
+ offset = fifo->size - offset;
+
+ /* if we are in 2 blocks process the end of the FIFO first */
+ if (offset < len) {
+ seed = fm10k_crc_16b(data, seed, offset * 2);
+ data = fifo->buffer;
+ len -= offset;
+ }
+
+ /* process any remaining bits */
+ return fm10k_crc_16b(data, seed, len * 2);
+}
+
+/**
+ * fm10k_mbx_update_local_crc - Update the local CRC for outgoing data
+ * @mbx: pointer to mailbox
+ * @head: head index provided by remote mailbox
+ *
+ * This function will generate the CRC for all data from the end of the
+ * last head update to the current one. It uses the result of the
+ * previous CRC as the seed for this update. The result is stored in
+ * mbx->local.
+ **/
+STATIC void fm10k_mbx_update_local_crc(struct fm10k_mbx_info *mbx, u16 head)
+{
+ u16 len = mbx->tail_len - fm10k_mbx_index_len(mbx, head, mbx->tail);
+
+ /* determine the offset for the start of the region to be pulled */
+ head = fm10k_fifo_head_offset(&mbx->tx, mbx->pulled);
+
+ /* update local CRC to include all of the pulled data */
+ mbx->local = fm10k_fifo_crc(&mbx->tx, head, len, mbx->local);
+}
+
+/**
+ * fm10k_mbx_verify_remote_crc - Verify the CRC is correct for current data
+ * @mbx: pointer to mailbox
+ *
+ * This function will take all data that has been provided from the remote
+ * end and generate a CRC for it. This is stored in mbx->remote. The
+ * CRC for the header is then computed and if the result is non-zero this
+ * is an error and we signal an error dropping all data and resetting the
+ * connection.
+ */
+STATIC s32 fm10k_mbx_verify_remote_crc(struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->rx;
+ u16 len = mbx->head_len;
+ u16 offset = fm10k_fifo_tail_offset(fifo, mbx->pushed) - len;
+ u16 crc;
+
+ /* update the remote CRC if new data has been received */
+ if (len)
+ mbx->remote = fm10k_fifo_crc(fifo, offset, len, mbx->remote);
+
+ /* process the full header as we have to validate the CRC */
+ crc = fm10k_crc_16b(&mbx->mbx_hdr, mbx->remote, 1);
+
+ /* notify other end if we have a problem */
+ return crc ? FM10K_MBX_ERR_CRC : FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_rx_ready - Indicates that a message is ready in the Rx FIFO
+ * @mbx: pointer to mailbox
+ *
+ * This function returns true if there is a message in the Rx FIFO to dequeue.
+ **/
+STATIC bool fm10k_mbx_rx_ready(struct fm10k_mbx_info *mbx)
+{
+ u16 msg_size = fm10k_fifo_head_len(&mbx->rx);
+
+ return msg_size && (fm10k_fifo_used(&mbx->rx) >= msg_size);
+}
+
+/**
+ * fm10k_mbx_tx_ready - Indicates that the mailbox is in state ready for Tx
+ * @mbx: pointer to mailbox
+ * @len: verify free space is >= this value
+ *
+ * This function returns true if the mailbox is in a state ready to transmit.
+ **/
+STATIC bool fm10k_mbx_tx_ready(struct fm10k_mbx_info *mbx, u16 len)
+{
+ u16 fifo_unused = fm10k_fifo_unused(&mbx->tx);
+
+ return (mbx->state == FM10K_STATE_OPEN) && (fifo_unused >= len);
+}
+
+/**
+ * fm10k_mbx_tx_complete - Indicates that the Tx FIFO has been emptied
+ * @mbx: pointer to mailbox
+ *
+ * This function returns true if the Tx FIFO is empty.
+ **/
+STATIC bool fm10k_mbx_tx_complete(struct fm10k_mbx_info *mbx)
+{
+ return fm10k_fifo_empty(&mbx->tx);
+}
+
+/**
+ * fm10k_mbx_deqeueue_rx - Dequeues the message from the head in the Rx FIFO
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function dequeues messages and hands them off to the TLV parser.
+ * It will return the number of messages processed when called.
+ **/
+STATIC u16 fm10k_mbx_dequeue_rx(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->rx;
+ s32 err;
+ u16 cnt;
+
+ /* parse Rx messages out of the Rx FIFO to empty it */
+ for (cnt = 0; !fm10k_fifo_empty(fifo); cnt++) {
+ err = fm10k_tlv_msg_parse(hw, fifo->buffer + fifo->head,
+ mbx, mbx->msg_data);
+ if (err < 0)
+ mbx->rx_parse_err++;
+
+ fm10k_fifo_head_drop(fifo);
+ }
+
+ /* shift remaining bytes back to start of FIFO */
+ memmove(fifo->buffer, fifo->buffer + fifo->tail, mbx->pushed << 2);
+
+ /* shift head and tail based on the memory we moved */
+ fifo->tail -= fifo->head;
+ fifo->head = 0;
+
+ return cnt;
+}
+
+/**
+ * fm10k_mbx_enqueue_tx - Enqueues the message to the tail of the Tx FIFO
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @msg: message array to read
+ *
+ * This function enqueues a message up to the size specified by the length
+ * contained in the first DWORD of the message and will place at the tail
+ * of the FIFO. It will return 0 on success, or a negative value on error.
+ **/
+STATIC s32 fm10k_mbx_enqueue_tx(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx, const u32 *msg)
+{
+ u32 countdown = mbx->timeout;
+ s32 err;
+
+ switch (mbx->state) {
+ case FM10K_STATE_CLOSED:
+ case FM10K_STATE_DISCONNECT:
+ return FM10K_MBX_ERR_NO_MBX;
+ default:
+ break;
+ }
+
+ /* enqueue the message on the Tx FIFO */
+ err = fm10k_fifo_enqueue(&mbx->tx, msg);
+
+ /* if it failed give the FIFO a chance to drain */
+ while (err && countdown) {
+ countdown--;
+ usec_delay(mbx->usec_delay);
+ mbx->ops.process(hw, mbx);
+ err = fm10k_fifo_enqueue(&mbx->tx, msg);
+ }
+
+ /* if we failed treat the error */
+ if (err) {
+ mbx->timeout = 0;
+ mbx->tx_busy++;
+ }
+
+ /* begin processing message, ignore errors as this is just meant
+ * to start the mailbox flow so we are not concerned if there
+ * is a bad error, or the mailbox is already busy with a request
+ */
+ if (!mbx->tail_len)
+ mbx->ops.process(hw, mbx);
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_read - Copies the mbmem to local message buffer
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function copies the message from the mbmem to the message array
+ **/
+STATIC s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
+{
+ DEBUGFUNC("fm10k_mbx_read");
+
+ /* only allow one reader in here at a time */
+ if (mbx->mbx_hdr)
+ return FM10K_MBX_ERR_BUSY;
+
+ /* read to capture initial interrupt bits */
+ if (FM10K_READ_MBX(hw, mbx->mbx_reg) & FM10K_MBX_REQ_INTERRUPT)
+ mbx->mbx_lock = FM10K_MBX_ACK;
+
+ /* write back interrupt bits to clear */
+ FM10K_WRITE_MBX(hw, mbx->mbx_reg,
+ FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT);
+
+ /* read remote header */
+ mbx->mbx_hdr = FM10K_READ_MBX(hw, mbx->mbmem_reg ^ mbx->mbmem_len);
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_write - Copies the local message buffer to mbmem
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function copies the message from the the message array to mbmem
+ **/
+STATIC void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
+{
+ u32 mbmem = mbx->mbmem_reg;
+
+ DEBUGFUNC("fm10k_mbx_write");
+
+ /* write new msg header to notify recipient of change */
+ FM10K_WRITE_MBX(hw, mbmem, mbx->mbx_hdr);
+
+ /* write mailbox to send interrupt */
+ if (mbx->mbx_lock)
+ FM10K_WRITE_MBX(hw, mbx->mbx_reg, mbx->mbx_lock);
+
+ /* we no longer are using the header so free it */
+ mbx->mbx_hdr = 0;
+ mbx->mbx_lock = 0;
+}
+
+/**
+ * fm10k_mbx_create_connect_hdr - Generate a connect mailbox header
+ * @mbx: pointer to mailbox
+ *
+ * This function returns a connection mailbox header
+ **/
+STATIC void fm10k_mbx_create_connect_hdr(struct fm10k_mbx_info *mbx)
+{
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_CONNECT, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->rx.size - 1, CONNECT_SIZE);
+}
+
+/**
+ * fm10k_mbx_create_data_hdr - Generate a data mailbox header
+ * @mbx: pointer to mailbox
+ *
+ * This function returns a data mailbox header
+ **/
+STATIC void fm10k_mbx_create_data_hdr(struct fm10k_mbx_info *mbx)
+{
+ u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DATA, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD);
+ struct fm10k_mbx_fifo *fifo = &mbx->tx;
+ u16 crc;
+
+ if (mbx->tail_len)
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ /* generate CRC for data in flight and header */
+ crc = fm10k_fifo_crc(fifo, fm10k_fifo_head_offset(fifo, mbx->pulled),
+ mbx->tail_len, mbx->local);
+ crc = fm10k_crc_16b(&hdr, crc, 1);
+
+ /* load header to memory to be written */
+ mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC);
+}
+
+/**
+ * fm10k_mbx_create_disconnect_hdr - Generate a disconnect mailbox header
+ * @mbx: pointer to mailbox
+ *
+ * This function returns a disconnect mailbox header
+ **/
+STATIC void fm10k_mbx_create_disconnect_hdr(struct fm10k_mbx_info *mbx)
+{
+ u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DISCONNECT, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD);
+ u16 crc = fm10k_crc_16b(&hdr, mbx->local, 1);
+
+ mbx->mbx_lock |= FM10K_MBX_ACK;
+
+ /* load header to memory to be written */
+ mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC);
+}
+
+/**
+ * fm10k_mbx_create_fake_disconnect_hdr - Generate a false disconnect mbox hdr
+ * @mbx: pointer to mailbox
+ *
+ * This function creates a fake disconnect header for loading into remote
+ * mailbox header. The primary purpose is to prevent errors on immediate
+ * start up after mbx->connect.
+ **/
+STATIC void fm10k_mbx_create_fake_disconnect_hdr(struct fm10k_mbx_info *mbx)
+{
+ u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DISCONNECT, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, TAIL) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->tail, HEAD);
+ u16 crc = fm10k_crc_16b(&hdr, mbx->local, 1);
+
+ mbx->mbx_lock |= FM10K_MBX_ACK;
+
+ /* load header to memory to be written */
+ mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC);
+}
+
+/**
+ * fm10k_mbx_create_error_msg - Generate an error message
+ * @mbx: pointer to mailbox
+ * @err: local error encountered
+ *
+ * This function will interpret the error provided by err, and based on
+ * that it may shift the message by 1 DWORD and then place an error header
+ * at the start of the message.
+ **/
+STATIC void fm10k_mbx_create_error_msg(struct fm10k_mbx_info *mbx, s32 err)
+{
+ /* only generate an error message for these types */
+ switch (err) {
+ case FM10K_MBX_ERR_TAIL:
+ case FM10K_MBX_ERR_HEAD:
+ case FM10K_MBX_ERR_TYPE:
+ case FM10K_MBX_ERR_SIZE:
+ case FM10K_MBX_ERR_RSVD0:
+ case FM10K_MBX_ERR_CRC:
+ break;
+ default:
+ return;
+ }
+
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_ERROR, TYPE) |
+ FM10K_MSG_HDR_FIELD_SET(err, ERR_NO) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD);
+}
+
+/**
+ * fm10k_mbx_validate_msg_hdr - Validate common fields in the message header
+ * @mbx: pointer to mailbox
+ *
+ * This function will parse up the fields in the mailbox header and return
+ * an error if the header contains any of a number of invalid configurations
+ * including unrecognized type, invalid route, or a malformed message.
+ **/
+STATIC s32 fm10k_mbx_validate_msg_hdr(struct fm10k_mbx_info *mbx)
+{
+ u16 type, rsvd0, head, tail, size;
+ const u32 *hdr = &mbx->mbx_hdr;
+
+ DEBUGFUNC("fm10k_mbx_validate_msg_hdr");
+
+ type = FM10K_MSG_HDR_FIELD_GET(*hdr, TYPE);
+ rsvd0 = FM10K_MSG_HDR_FIELD_GET(*hdr, RSVD0);
+ tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL);
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+ size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE);
+
+ if (rsvd0)
+ return FM10K_MBX_ERR_RSVD0;
+
+ switch (type) {
+ case FM10K_MSG_DISCONNECT:
+ /* validate that all data has been received */
+ if (tail != mbx->head)
+ return FM10K_MBX_ERR_TAIL;
+
+ /* fall through */
+ case FM10K_MSG_DATA:
+ /* validate that head is moving correctly */
+ if (!head || (head == FM10K_MSG_HDR_MASK(HEAD)))
+ return FM10K_MBX_ERR_HEAD;
+ if (fm10k_mbx_index_len(mbx, head, mbx->tail) > mbx->tail_len)
+ return FM10K_MBX_ERR_HEAD;
+
+ /* validate that tail is moving correctly */
+ if (!tail || (tail == FM10K_MSG_HDR_MASK(TAIL)))
+ return FM10K_MBX_ERR_TAIL;
+ if (fm10k_mbx_index_len(mbx, mbx->head, tail) < mbx->mbmem_len)
+ break;
+
+ return FM10K_MBX_ERR_TAIL;
+ case FM10K_MSG_CONNECT:
+ /* validate size is in range and is power of 2 mask */
+ if ((size < FM10K_VFMBX_MSG_MTU) || (size & (size + 1)))
+ return FM10K_MBX_ERR_SIZE;
+
+ /* fall through */
+ case FM10K_MSG_ERROR:
+ if (!head || (head == FM10K_MSG_HDR_MASK(HEAD)))
+ return FM10K_MBX_ERR_HEAD;
+ /* neither create nor error include a tail offset */
+ if (tail)
+ return FM10K_MBX_ERR_TAIL;
+
+ break;
+ default:
+ return FM10K_MBX_ERR_TYPE;
+ }
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_create_reply - Generate reply based on state and remote head
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @head: acknowledgement number
+ *
+ * This function will generate an outgoing message based on the current
+ * mailbox state and the remote FIFO head. It will return the length
+ * of the outgoing message excluding header on success, and a negative value
+ * on error.
+ **/
+STATIC s32 fm10k_mbx_create_reply(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx, u16 head)
+{
+ switch (mbx->state) {
+ case FM10K_STATE_OPEN:
+ case FM10K_STATE_DISCONNECT:
+ /* update our checksum for the outgoing data */
+ fm10k_mbx_update_local_crc(mbx, head);
+
+ /* as long as other end recognizes us keep sending data */
+ fm10k_mbx_pull_head(hw, mbx, head);
+
+ /* generate new header based on data */
+ if (mbx->tail_len || (mbx->state == FM10K_STATE_OPEN))
+ fm10k_mbx_create_data_hdr(mbx);
+ else
+ fm10k_mbx_create_disconnect_hdr(mbx);
+ break;
+ case FM10K_STATE_CONNECT:
+ /* send disconnect even if we aren't connected */
+ fm10k_mbx_create_connect_hdr(mbx);
+ break;
+ case FM10K_STATE_CLOSED:
+ /* generate new header based on data */
+ fm10k_mbx_create_disconnect_hdr(mbx);
+ default:
+ break;
+ }
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_reset_work- Reset internal pointers for any pending work
+ * @mbx: pointer to mailbox
+ *
+ * This function will reset all internal pointers so any work in progress
+ * is dropped. This call should occur every time we transition from the
+ * open state to the connect state.
+ **/
+STATIC void fm10k_mbx_reset_work(struct fm10k_mbx_info *mbx)
+{
+ u16 len, head, ack;
+
+ /* reset our outgoing max size back to Rx limits */
+ mbx->max_size = mbx->rx.size - 1;
+
+ /* update mbx->pulled to account for tail_len and ack */
+ head = FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, HEAD);
+ ack = fm10k_mbx_index_len(mbx, head, mbx->tail);
+ mbx->pulled += mbx->tail_len - ack;
+
+ /* now drop any messages which have started or finished transmitting */
+ while (fm10k_fifo_head_len(&mbx->tx) && mbx->pulled) {
+ len = fm10k_fifo_head_drop(&mbx->tx);
+ mbx->tx_dropped++;
+ if (mbx->pulled >= len)
+ mbx->pulled -= len;
+ else
+ mbx->pulled = 0;
+ }
+
+ /* just do a quick resysnc to start of message */
+ mbx->pushed = 0;
+ mbx->pulled = 0;
+ mbx->tail_len = 0;
+ mbx->head_len = 0;
+ mbx->rx.tail = 0;
+ mbx->rx.head = 0;
+}
+
+/**
+ * fm10k_mbx_update_max_size - Update the max_size and drop any large messages
+ * @mbx: pointer to mailbox
+ * @size: new value for max_size
+ *
+ * This function updates the max_size value and drops any outgoing messages
+ * at the head of the Tx FIFO if they are larger than max_size. It does not
+ * drop all messages, as this is too difficult to parse and remove them from
+ * the FIFO. Instead, rely on the checking to ensure that messages larger
+ * than max_size aren't pushed into the memory buffer.
+ **/
+STATIC void fm10k_mbx_update_max_size(struct fm10k_mbx_info *mbx, u16 size)
+{
+ u16 len;
+
+ DEBUGFUNC("fm10k_mbx_update_max_size");
+
+ mbx->max_size = size;
+
+ /* flush any oversized messages from the queue */
+ for (len = fm10k_fifo_head_len(&mbx->tx);
+ len > size;
+ len = fm10k_fifo_head_len(&mbx->tx)) {
+ fm10k_fifo_head_drop(&mbx->tx);
+ mbx->tx_dropped++;
+ }
+}
+
+/**
+ * fm10k_mbx_connect_reset - Reset following request for reset
+ * @mbx: pointer to mailbox
+ *
+ * This function resets the mailbox to either a disconnected state
+ * or a connect state depending on the current mailbox state
+ **/
+STATIC void fm10k_mbx_connect_reset(struct fm10k_mbx_info *mbx)
+{
+ /* just do a quick resysnc to start of frame */
+ fm10k_mbx_reset_work(mbx);
+
+ /* reset CRC seeds */
+ mbx->local = FM10K_MBX_CRC_SEED;
+ mbx->remote = FM10K_MBX_CRC_SEED;
+
+ /* we cannot exit connect until the size is good */
+ if (mbx->state == FM10K_STATE_OPEN)
+ mbx->state = FM10K_STATE_CONNECT;
+ else
+ mbx->state = FM10K_STATE_CLOSED;
+}
+
+/**
+ * fm10k_mbx_process_connect - Process connect header
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will read an incoming connect header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+STATIC s32 fm10k_mbx_process_connect(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const enum fm10k_mbx_state state = mbx->state;
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 size, head;
+
+ /* we will need to pull all of the fields for verification */
+ size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE);
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+
+ switch (state) {
+ case FM10K_STATE_DISCONNECT:
+ case FM10K_STATE_OPEN:
+ /* reset any in-progress work */
+ fm10k_mbx_connect_reset(mbx);
+ break;
+ case FM10K_STATE_CONNECT:
+ /* we cannot exit connect until the size is good */
+ if (size > mbx->rx.size) {
+ mbx->max_size = mbx->rx.size - 1;
+ } else {
+ /* record the remote system requesting connection */
+ mbx->state = FM10K_STATE_OPEN;
+
+ fm10k_mbx_update_max_size(mbx, size);
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* align our tail index to remote head index */
+ mbx->tail = head;
+
+ return fm10k_mbx_create_reply(hw, mbx, head);
+}
+
+/**
+ * fm10k_mbx_process_data - Process data header
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will read an incoming data header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+STATIC s32 fm10k_mbx_process_data(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 head, tail;
+ s32 err;
+
+ DEBUGFUNC("fm10k_mbx_process_data");
+
+ /* we will need to pull all of the fields for verification */
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+ tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL);
+
+ /* if we are in connect just update our data and go */
+ if (mbx->state == FM10K_STATE_CONNECT) {
+ mbx->tail = head;
+ mbx->state = FM10K_STATE_OPEN;
+ }
+
+ /* abort on message size errors */
+ err = fm10k_mbx_push_tail(hw, mbx, tail);
+ if (err < 0)
+ return err;
+
+ /* verify the checksum on the incoming data */
+ err = fm10k_mbx_verify_remote_crc(mbx);
+ if (err)
+ return err;
+
+ /* process messages if we have received any */
+ fm10k_mbx_dequeue_rx(hw, mbx);
+
+ return fm10k_mbx_create_reply(hw, mbx, head);
+}
+
+/**
+ * fm10k_mbx_process_disconnect - Process disconnect header
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will read an incoming disconnect header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+STATIC s32 fm10k_mbx_process_disconnect(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const enum fm10k_mbx_state state = mbx->state;
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 head;
+ s32 err;
+
+ /* we will need to pull the header field for verification */
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+
+ /* We should not be receiving disconnect if Rx is incomplete */
+ if (mbx->pushed)
+ return FM10K_MBX_ERR_TAIL;
+
+ /* we have already verified mbx->head == tail so we know this is 0 */
+ mbx->head_len = 0;
+
+ /* verify the checksum on the incoming header is correct */
+ err = fm10k_mbx_verify_remote_crc(mbx);
+ if (err)
+ return err;
+
+ switch (state) {
+ case FM10K_STATE_DISCONNECT:
+ case FM10K_STATE_OPEN:
+ /* state doesn't change if we still have work to do */
+ if (!fm10k_mbx_tx_complete(mbx))
+ break;
+
+ /* verify the head indicates we completed all transmits */
+ if (head != mbx->tail)
+ return FM10K_MBX_ERR_HEAD;
+
+ /* reset any in-progress work */
+ fm10k_mbx_connect_reset(mbx);
+ break;
+ default:
+ break;
+ }
+
+ return fm10k_mbx_create_reply(hw, mbx, head);
+}
+
+/**
+ * fm10k_mbx_process_error - Process error header
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will read an incoming error header and reply with the
+ * appropriate message. It will return a value indicating the number of
+ * data DWORDs on success, or will return a negative value on failure.
+ **/
+STATIC s32 fm10k_mbx_process_error(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 head;
+
+ /* we will need to pull all of the fields for verification */
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD);
+
+ switch (mbx->state) {
+ case FM10K_STATE_OPEN:
+ case FM10K_STATE_DISCONNECT:
+ /* flush any uncompleted work */
+ fm10k_mbx_reset_work(mbx);
+
+ /* reset CRC seeds */
+ mbx->local = FM10K_MBX_CRC_SEED;
+ mbx->remote = FM10K_MBX_CRC_SEED;
+
+ /* reset tail index and size to prepare for reconnect */
+ mbx->tail = head;
+
+ /* if open then reset max_size and go back to connect */
+ if (mbx->state == FM10K_STATE_OPEN) {
+ mbx->state = FM10K_STATE_CONNECT;
+ break;
+ }
+
+ /* send a connect message to get data flowing again */
+ fm10k_mbx_create_connect_hdr(mbx);
+ return FM10K_SUCCESS;
+ default:
+ break;
+ }
+
+ return fm10k_mbx_create_reply(hw, mbx, mbx->tail);
+}
+
+/**
+ * fm10k_mbx_process - Process mailbox interrupt
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will process incoming mailbox events and generate mailbox
+ * replies. It will return a value indicating the number of DWORDs
+ * transmitted excluding header on success or a negative value on error.
+ **/
+STATIC s32 fm10k_mbx_process(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ s32 err;
+
+ DEBUGFUNC("fm10k_mbx_process");
+
+ /* we do not read mailbox if closed */
+ if (mbx->state == FM10K_STATE_CLOSED)
+ return FM10K_SUCCESS;
+
+ /* copy data from mailbox */
+ err = fm10k_mbx_read(hw, mbx);
+ if (err)
+ return err;
+
+ /* validate type, source, and destination */
+ err = fm10k_mbx_validate_msg_hdr(mbx);
+ if (err < 0)
+ goto msg_err;
+
+ switch (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, TYPE)) {
+ case FM10K_MSG_CONNECT:
+ err = fm10k_mbx_process_connect(hw, mbx);
+ break;
+ case FM10K_MSG_DATA:
+ err = fm10k_mbx_process_data(hw, mbx);
+ break;
+ case FM10K_MSG_DISCONNECT:
+ err = fm10k_mbx_process_disconnect(hw, mbx);
+ break;
+ case FM10K_MSG_ERROR:
+ err = fm10k_mbx_process_error(hw, mbx);
+ break;
+ default:
+ err = FM10K_MBX_ERR_TYPE;
+ break;
+ }
+
+msg_err:
+ /* notify partner of errors on our end */
+ if (err < 0)
+ fm10k_mbx_create_error_msg(mbx, err);
+
+ /* copy data from mailbox */
+ fm10k_mbx_write(hw, mbx);
+
+ return err;
+}
+
+/**
+ * fm10k_mbx_disconnect - Shutdown mailbox connection
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will shut down the mailbox. It places the mailbox first
+ * in the disconnect state, it then allows up to a predefined timeout for
+ * the mailbox to transition to close on its own. If this does not occur
+ * then the mailbox will be forced into the closed state.
+ *
+ * Any mailbox transactions not completed before calling this function
+ * are not guaranteed to complete and may be dropped.
+ **/
+STATIC void fm10k_mbx_disconnect(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ int timeout = mbx->timeout ? FM10K_MBX_DISCONNECT_TIMEOUT : 0;
+
+ DEBUGFUNC("fm10k_mbx_disconnect");
+
+ /* Place mbx in ready to disconnect state */
+ mbx->state = FM10K_STATE_DISCONNECT;
+
+ /* trigger interrupt to start shutdown process */
+ FM10K_WRITE_MBX(hw, mbx->mbx_reg, FM10K_MBX_REQ |
+ FM10K_MBX_INTERRUPT_DISABLE);
+ do {
+ usec_delay(FM10K_MBX_POLL_DELAY);
+ mbx->ops.process(hw, mbx);
+ timeout -= FM10K_MBX_POLL_DELAY;
+ } while ((timeout > 0) && (mbx->state != FM10K_STATE_CLOSED));
+
+ /* in case we didn't close, just force the mailbox into shutdown and
+ * drop all left over messages in the FIFO.
+ */
+ fm10k_mbx_connect_reset(mbx);
+ fm10k_fifo_drop_all(&mbx->tx);
+
+ FM10K_WRITE_MBX(hw, mbx->mbmem_reg, 0);
+}
+
+/**
+ * fm10k_mbx_connect - Start mailbox connection
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will initiate a mailbox connection. It will populate the
+ * mailbox with a broadcast connect message and then initialize the lock.
+ * This is safe since the connect message is a single DWORD so the mailbox
+ * transaction is guaranteed to be atomic.
+ *
+ * This function will return an error if the mailbox has not been initiated
+ * or is currently in use.
+ **/
+STATIC s32 fm10k_mbx_connect(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
+{
+ DEBUGFUNC("fm10k_mbx_connect");
+
+ /* we cannot connect an uninitialized mailbox */
+ if (!mbx->rx.buffer)
+ return FM10K_MBX_ERR_NO_SPACE;
+
+ /* we cannot connect an already connected mailbox */
+ if (mbx->state != FM10K_STATE_CLOSED)
+ return FM10K_MBX_ERR_BUSY;
+
+ /* mailbox timeout can now become active */
+ mbx->timeout = FM10K_MBX_INIT_TIMEOUT;
+
+ /* Place mbx in ready to connect state */
+ mbx->state = FM10K_STATE_CONNECT;
+
+ fm10k_mbx_reset_work(mbx);
+
+ /* initialize header of remote mailbox */
+ fm10k_mbx_create_fake_disconnect_hdr(mbx);
+ FM10K_WRITE_MBX(hw, mbx->mbmem_reg ^ mbx->mbmem_len, mbx->mbx_hdr);
+
+ /* enable interrupt and notify other party of new message */
+ mbx->mbx_lock = FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT |
+ FM10K_MBX_INTERRUPT_ENABLE;
+
+ /* generate and load connect header into mailbox */
+ fm10k_mbx_create_connect_hdr(mbx);
+ fm10k_mbx_write(hw, mbx);
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_validate_handlers - Validate layout of message parsing data
+ * @msg_data: handlers for mailbox events
+ *
+ * This function validates the layout of the message parsing data. This
+ * should be mostly static, but it is important to catch any errors that
+ * are made when constructing the parsers.
+ **/
+STATIC s32 fm10k_mbx_validate_handlers(const struct fm10k_msg_data *msg_data)
+{
+ const struct fm10k_tlv_attr *attr;
+ unsigned int id;
+
+ DEBUGFUNC("fm10k_mbx_validate_handlers");
+
+ /* Allow NULL mailboxes that transmit but don't receive */
+ if (!msg_data)
+ return FM10K_SUCCESS;
+
+ while (msg_data->id != FM10K_TLV_ERROR) {
+ /* all messages should have a function handler */
+ if (!msg_data->func)
+ return FM10K_ERR_PARAM;
+
+ /* parser is optional */
+ attr = msg_data->attr;
+ if (attr) {
+ while (attr->id != FM10K_TLV_ERROR) {
+ id = attr->id;
+ attr++;
+ /* ID should always be increasing */
+ if (id >= attr->id)
+ return FM10K_ERR_PARAM;
+ /* ID should fit in results array */
+ if (id >= FM10K_TLV_RESULTS_MAX)
+ return FM10K_ERR_PARAM;
+ }
+
+ /* verify terminator is in the list */
+ if (attr->id != FM10K_TLV_ERROR)
+ return FM10K_ERR_PARAM;
+ }
+
+ id = msg_data->id;
+ msg_data++;
+ /* ID should always be increasing */
+ if (id >= msg_data->id)
+ return FM10K_ERR_PARAM;
+ }
+
+ /* verify terminator is in the list */
+ if ((msg_data->id != FM10K_TLV_ERROR) || !msg_data->func)
+ return FM10K_ERR_PARAM;
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_mbx_register_handlers - Register a set of handler ops for mailbox
+ * @mbx: pointer to mailbox
+ * @msg_data: handlers for mailbox events
+ *
+ * This function associates a set of message handling ops with a mailbox.
+ **/
+STATIC s32 fm10k_mbx_register_handlers(struct fm10k_mbx_info *mbx,
+ const struct fm10k_msg_data *msg_data)
+{
+ DEBUGFUNC("fm10k_mbx_register_handlers");
+
+ /* validate layout of handlers before assigning them */
+ if (fm10k_mbx_validate_handlers(msg_data))
+ return FM10K_ERR_PARAM;
+
+ /* initialize the message handlers */
+ mbx->msg_data = msg_data;
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_pfvf_mbx_init - Initialize mailbox memory for PF/VF mailbox
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @msg_data: handlers for mailbox events
+ * @id: ID reference for PF as it supports up to 64 PF/VF mailboxes
+ *
+ * This function initializes the mailbox for use. It will split the
+ * buffer provided and use that to populate both the Tx and Rx FIFO by
+ * evenly splitting it. In order to allow for easy masking of head/tail
+ * the value reported in size must be a power of 2 and is reported in
+ * DWORDs, not bytes. Any invalid values will cause the mailbox to return
+ * error.
+ **/
+s32 fm10k_pfvf_mbx_init(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx,
+ const struct fm10k_msg_data *msg_data, u8 id)
+{
+ DEBUGFUNC("fm10k_pfvf_mbx_init");
+
+ /* initialize registers */
+ switch (hw->mac.type) {
+ case fm10k_mac_vf:
+ mbx->mbx_reg = FM10K_VFMBX;
+ mbx->mbmem_reg = FM10K_VFMBMEM(FM10K_VFMBMEM_VF_XOR);
+ break;
+ case fm10k_mac_pf:
+ /* there are only 64 VF <-> PF mailboxes */
+ if (id < 64) {
+ mbx->mbx_reg = FM10K_MBX(id);
+ mbx->mbmem_reg = FM10K_MBMEM_VF(id, 0);
+ break;
+ }
+ /* fallthough */
+ default:
+ return FM10K_MBX_ERR_NO_MBX;
+ }
+
+ /* start out in closed state */
+ mbx->state = FM10K_STATE_CLOSED;
+
+ /* validate layout of handlers before assigning them */
+ if (fm10k_mbx_validate_handlers(msg_data))
+ return FM10K_ERR_PARAM;
+
+ /* initialize the message handlers */
+ mbx->msg_data = msg_data;
+
+ /* start mailbox as timed out and let the reset_hw call
+ * set the timeout value to begin communications
+ */
+ mbx->timeout = 0;
+ mbx->usec_delay = FM10K_MBX_INIT_DELAY;
+
+ /* initialize tail and head */
+ mbx->tail = 1;
+ mbx->head = 1;
+
+ /* initialize CRC seeds */
+ mbx->local = FM10K_MBX_CRC_SEED;
+ mbx->remote = FM10K_MBX_CRC_SEED;
+
+ /* Split buffer for use by Tx/Rx FIFOs */
+ mbx->max_size = FM10K_MBX_MSG_MAX_SIZE;
+ mbx->mbmem_len = FM10K_VFMBMEM_VF_XOR;
+
+ /* initialize the FIFOs, sizes are in 4 byte increments */
+ fm10k_fifo_init(&mbx->tx, mbx->buffer, FM10K_MBX_TX_BUFFER_SIZE);
+ fm10k_fifo_init(&mbx->rx, &mbx->buffer[FM10K_MBX_TX_BUFFER_SIZE],
+ FM10K_MBX_RX_BUFFER_SIZE);
+
+ /* initialize function pointers */
+ mbx->ops.connect = fm10k_mbx_connect;
+ mbx->ops.disconnect = fm10k_mbx_disconnect;
+ mbx->ops.rx_ready = fm10k_mbx_rx_ready;
+ mbx->ops.tx_ready = fm10k_mbx_tx_ready;
+ mbx->ops.tx_complete = fm10k_mbx_tx_complete;
+ mbx->ops.enqueue_tx = fm10k_mbx_enqueue_tx;
+ mbx->ops.process = fm10k_mbx_process;
+ mbx->ops.register_handlers = fm10k_mbx_register_handlers;
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_sm_mbx_create_data_hdr - Generate a mailbox header for local FIFO
+ * @mbx: pointer to mailbox
+ *
+ * This function returns a data mailbox header
+ **/
+STATIC void fm10k_sm_mbx_create_data_hdr(struct fm10k_mbx_info *mbx)
+{
+ if (mbx->tail_len)
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(mbx->tail, SM_TAIL) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->remote, SM_VER) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, SM_HEAD);
+}
+
+/**
+ * fm10k_sm_mbx_create_connect_hdr - Generate a mailbox header for local FIFO
+ * @mbx: pointer to mailbox
+ * @err: error flags to report if any
+ *
+ * This function returns a connection mailbox header
+ **/
+STATIC void fm10k_sm_mbx_create_connect_hdr(struct fm10k_mbx_info *mbx, u8 err)
+{
+ if (mbx->local)
+ mbx->mbx_lock |= FM10K_MBX_REQ;
+
+ mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(mbx->tail, SM_TAIL) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->remote, SM_VER) |
+ FM10K_MSG_HDR_FIELD_SET(mbx->head, SM_HEAD) |
+ FM10K_MSG_HDR_FIELD_SET(err, SM_ERR);
+}
+
+/**
+ * fm10k_sm_mbx_connect_reset - Reset following request for reset
+ * @mbx: pointer to mailbox
+ *
+ * This function resets the mailbox to a just connected state
+ **/
+STATIC void fm10k_sm_mbx_connect_reset(struct fm10k_mbx_info *mbx)
+{
+ /* flush any uncompleted work */
+ fm10k_mbx_reset_work(mbx);
+
+ /* set local version to max and remote version to 0 */
+ mbx->local = FM10K_SM_MBX_VERSION;
+ mbx->remote = 0;
+
+ /* initialize tail and head */
+ mbx->tail = 1;
+ mbx->head = 1;
+
+ /* reset state back to connect */
+ mbx->state = FM10K_STATE_CONNECT;
+}
+
+/**
+ * fm10k_sm_mbx_connect - Start switch manager mailbox connection
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will initiate a mailbox connection with the switch
+ * manager. To do this it will first disconnect the mailbox, and then
+ * reconnect it in order to complete a reset of the mailbox.
+ *
+ * This function will return an error if the mailbox has not been initiated
+ * or is currently in use.
+ **/
+STATIC s32 fm10k_sm_mbx_connect(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx)
+{
+ DEBUGFUNC("fm10k_sm_mbx_connect");
+
+ /* we cannot connect an uninitialized mailbox */
+ if (!mbx->rx.buffer)
+ return FM10K_MBX_ERR_NO_SPACE;
+
+ /* we cannot connect an already connected mailbox */
+ if (mbx->state != FM10K_STATE_CLOSED)
+ return FM10K_MBX_ERR_BUSY;
+
+ /* mailbox timeout can now become active */
+ mbx->timeout = FM10K_MBX_INIT_TIMEOUT;
+
+ /* Place mbx in ready to connect state */
+ mbx->state = FM10K_STATE_CONNECT;
+ mbx->max_size = FM10K_MBX_MSG_MAX_SIZE;
+
+ /* reset interface back to connect */
+ fm10k_sm_mbx_connect_reset(mbx);
+
+ /* enable interrupt and notify other party of new message */
+ mbx->mbx_lock = FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT |
+ FM10K_MBX_INTERRUPT_ENABLE;
+
+ /* generate and load connect header into mailbox */
+ fm10k_sm_mbx_create_connect_hdr(mbx, 0);
+ fm10k_mbx_write(hw, mbx);
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_sm_mbx_disconnect - Shutdown mailbox connection
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will shut down the mailbox. It places the mailbox first
+ * in the disconnect state, it then allows up to a predefined timeout for
+ * the mailbox to transition to close on its own. If this does not occur
+ * then the mailbox will be forced into the closed state.
+ *
+ * Any mailbox transactions not completed before calling this function
+ * are not guaranteed to complete and may be dropped.
+ **/
+STATIC void fm10k_sm_mbx_disconnect(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ int timeout = mbx->timeout ? FM10K_MBX_DISCONNECT_TIMEOUT : 0;
+
+ DEBUGFUNC("fm10k_sm_mbx_disconnect");
+
+ /* Place mbx in ready to disconnect state */
+ mbx->state = FM10K_STATE_DISCONNECT;
+
+ /* trigger interrupt to start shutdown process */
+ FM10K_WRITE_REG(hw, mbx->mbx_reg, FM10K_MBX_REQ |
+ FM10K_MBX_INTERRUPT_DISABLE);
+ do {
+ usec_delay(FM10K_MBX_POLL_DELAY);
+ mbx->ops.process(hw, mbx);
+ timeout -= FM10K_MBX_POLL_DELAY;
+ } while ((timeout > 0) && (mbx->state != FM10K_STATE_CLOSED));
+
+ /* in case we didn't close just force the mailbox into shutdown */
+ mbx->state = FM10K_STATE_CLOSED;
+ mbx->remote = 0;
+ fm10k_mbx_reset_work(mbx);
+ fm10k_fifo_drop_all(&mbx->tx);
+
+ FM10K_WRITE_REG(hw, mbx->mbmem_reg, 0);
+}
+
+/**
+ * fm10k_sm_mbx_validate_fifo_hdr - Validate fields in the remote FIFO header
+ * @mbx: pointer to mailbox
+ *
+ * This function will parse up the fields in the mailbox header and return
+ * an error if the header contains any of a number of invalid configurations
+ * including unrecognized offsets or version numbers.
+ **/
+STATIC s32 fm10k_sm_mbx_validate_fifo_hdr(struct fm10k_mbx_info *mbx)
+{
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 tail, head, ver;
+
+ DEBUGFUNC("fm10k_sm_mbx_validate_fifo_hdr");
+
+ tail = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_TAIL);
+ ver = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_VER);
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_HEAD);
+
+ switch (ver) {
+ case 0:
+ break;
+ case FM10K_SM_MBX_VERSION:
+ if (!head || head > FM10K_SM_MBX_FIFO_LEN)
+ return FM10K_MBX_ERR_HEAD;
+ if (!tail || tail > FM10K_SM_MBX_FIFO_LEN)
+ return FM10K_MBX_ERR_TAIL;
+ if (mbx->tail < head)
+ head += mbx->mbmem_len - 1;
+ if (tail < mbx->head)
+ tail += mbx->mbmem_len - 1;
+ if (fm10k_mbx_index_len(mbx, head, mbx->tail) > mbx->tail_len)
+ return FM10K_MBX_ERR_HEAD;
+ if (fm10k_mbx_index_len(mbx, mbx->head, tail) < mbx->mbmem_len)
+ break;
+ return FM10K_MBX_ERR_TAIL;
+ default:
+ return FM10K_MBX_ERR_SRC;
+ }
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_sm_mbx_process_error - Process header with error flag set
+ * @mbx: pointer to mailbox
+ *
+ * This function is meant to respond to a request where the error flag
+ * is set. As a result we will terminate a connection if one is present
+ * and fall back into the reset state with a connection header of version
+ * 0 (RESET).
+ **/
+STATIC void fm10k_sm_mbx_process_error(struct fm10k_mbx_info *mbx)
+{
+ const enum fm10k_mbx_state state = mbx->state;
+
+ switch (state) {
+ case FM10K_STATE_DISCONNECT:
+ /* if there is an error just disconnect */
+ mbx->remote = 0;
+ break;
+ case FM10K_STATE_OPEN:
+ /* flush any uncompleted work */
+ fm10k_sm_mbx_connect_reset(mbx);
+ break;
+ case FM10K_STATE_CONNECT:
+ /* try connnecting at lower version */
+ if (mbx->remote) {
+ while (mbx->local > 1)
+ mbx->local--;
+ mbx->remote = 0;
+ }
+ break;
+ default:
+ break;
+ }
+
+ fm10k_sm_mbx_create_connect_hdr(mbx, 0);
+}
+
+/**
+ * fm10k_sm_mbx_create_error_msg - Process an error in FIFO header
+ * @mbx: pointer to mailbox
+ * @err: local error encountered
+ *
+ * This function will interpret the error provided by err, and based on
+ * that it may set the error bit in the local message header
+ **/
+STATIC void fm10k_sm_mbx_create_error_msg(struct fm10k_mbx_info *mbx, s32 err)
+{
+ /* only generate an error message for these types */
+ switch (err) {
+ case FM10K_MBX_ERR_TAIL:
+ case FM10K_MBX_ERR_HEAD:
+ case FM10K_MBX_ERR_SRC:
+ case FM10K_MBX_ERR_SIZE:
+ case FM10K_MBX_ERR_RSVD0:
+ break;
+ default:
+ return;
+ }
+
+ /* process it as though we received an error, and send error reply */
+ fm10k_sm_mbx_process_error(mbx);
+ fm10k_sm_mbx_create_connect_hdr(mbx, 1);
+}
+
+/**
+ * fm10k_sm_mbx_receive - Take message from Rx mailbox FIFO and put it in Rx
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @tail: tail index of message
+ *
+ * This function will dequeue one message from the Rx switch manager mailbox
+ * FIFO and place it in the Rx mailbox FIFO for processing by software.
+ **/
+STATIC s32 fm10k_sm_mbx_receive(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx,
+ u16 tail)
+{
+ /* reduce length by 1 to convert to a mask */
+ u16 mbmem_len = mbx->mbmem_len - 1;
+ s32 err;
+
+ DEBUGFUNC("fm10k_sm_mbx_receive");
+
+ /* push tail in front of head */
+ if (tail < mbx->head)
+ tail += mbmem_len;
+
+ /* copy data to the Rx FIFO */
+ err = fm10k_mbx_push_tail(hw, mbx, tail);
+ if (err < 0)
+ return err;
+
+ /* process messages if we have received any */
+ fm10k_mbx_dequeue_rx(hw, mbx);
+
+ /* guarantee head aligns with the end of the last message */
+ mbx->head = fm10k_mbx_head_sub(mbx, mbx->pushed);
+ mbx->pushed = 0;
+
+ /* clear any extra bits left over since index adds 1 extra bit */
+ if (mbx->head > mbmem_len)
+ mbx->head -= mbmem_len;
+
+ return err;
+}
+
+/**
+ * fm10k_sm_mbx_transmit - Take message from Tx and put it in Tx mailbox FIFO
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @head: head index of message
+ *
+ * This function will dequeue one message from the Tx mailbox FIFO and place
+ * it in the Tx switch manager mailbox FIFO for processing by hardware.
+ **/
+STATIC void fm10k_sm_mbx_transmit(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx, u16 head)
+{
+ struct fm10k_mbx_fifo *fifo = &mbx->tx;
+ /* reduce length by 1 to convert to a mask */
+ u16 mbmem_len = mbx->mbmem_len - 1;
+ u16 tail_len, len = 0;
+ u32 *msg;
+
+ DEBUGFUNC("fm10k_sm_mbx_transmit");
+
+ /* push head behind tail */
+ if (mbx->tail < head)
+ head += mbmem_len;
+
+ fm10k_mbx_pull_head(hw, mbx, head);
+
+ /* determine msg aligned offset for end of buffer */
+ do {
+ msg = fifo->buffer + fm10k_fifo_head_offset(fifo, len);
+ tail_len = len;
+ len += FM10K_TLV_DWORD_LEN(*msg);
+ } while ((len <= mbx->tail_len) && (len < mbmem_len));
+
+ /* guarantee we stop on a message boundary */
+ if (mbx->tail_len > tail_len) {
+ mbx->tail = fm10k_mbx_tail_sub(mbx, mbx->tail_len - tail_len);
+ mbx->tail_len = tail_len;
+ }
+
+ /* clear any extra bits left over since index adds 1 extra bit */
+ if (mbx->tail > mbmem_len)
+ mbx->tail -= mbmem_len;
+}
+
+/**
+ * fm10k_sm_mbx_create_reply - Generate reply based on state and remote head
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @head: acknowledgement number
+ *
+ * This function will generate an outgoing message based on the current
+ * mailbox state and the remote FIFO head. It will return the length
+ * of the outgoing message excluding header on success, and a negative value
+ * on error.
+ **/
+STATIC void fm10k_sm_mbx_create_reply(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx, u16 head)
+{
+ switch (mbx->state) {
+ case FM10K_STATE_OPEN:
+ case FM10K_STATE_DISCONNECT:
+ /* flush out Tx data */
+ fm10k_sm_mbx_transmit(hw, mbx, head);
+
+ /* generate new header based on data */
+ if (mbx->tail_len || (mbx->state == FM10K_STATE_OPEN)) {
+ fm10k_sm_mbx_create_data_hdr(mbx);
+ } else {
+ mbx->remote = 0;
+ fm10k_sm_mbx_create_connect_hdr(mbx, 0);
+ }
+ break;
+ case FM10K_STATE_CONNECT:
+ case FM10K_STATE_CLOSED:
+ fm10k_sm_mbx_create_connect_hdr(mbx, 0);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * fm10k_sm_mbx_process_reset - Process header with version == 0 (RESET)
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function is meant to respond to a request where the version data
+ * is set to 0. As such we will either terminate the connection or go
+ * into the connect state in order to re-establish the connection. This
+ * function can also be used to respond to an error as the connection
+ * resetting would also be a means of dealing with errors.
+ **/
+STATIC void fm10k_sm_mbx_process_reset(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const enum fm10k_mbx_state state = mbx->state;
+
+ switch (state) {
+ case FM10K_STATE_DISCONNECT:
+ /* drop remote connections and disconnect */
+ mbx->state = FM10K_STATE_CLOSED;
+ mbx->remote = 0;
+ mbx->local = 0;
+ break;
+ case FM10K_STATE_OPEN:
+ /* flush any incomplete work */
+ fm10k_sm_mbx_connect_reset(mbx);
+ break;
+ case FM10K_STATE_CONNECT:
+ /* Update remote value to match local value */
+ mbx->remote = mbx->local;
+ default:
+ break;
+ }
+
+ fm10k_sm_mbx_create_reply(hw, mbx, mbx->tail);
+}
+
+/**
+ * fm10k_sm_mbx_process_version_1 - Process header with version == 1
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function is meant to process messages received when the remote
+ * mailbox is active.
+ **/
+STATIC s32 fm10k_sm_mbx_process_version_1(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ const u32 *hdr = &mbx->mbx_hdr;
+ u16 head, tail;
+ s32 len;
+
+ /* pull all fields needed for verification */
+ tail = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_TAIL);
+ head = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_HEAD);
+
+ /* if we are in connect and wanting version 1 then start up and go */
+ if (mbx->state == FM10K_STATE_CONNECT) {
+ if (!mbx->remote)
+ goto send_reply;
+ if (mbx->remote != 1)
+ return FM10K_MBX_ERR_SRC;
+
+ mbx->state = FM10K_STATE_OPEN;
+ }
+
+ do {
+ /* abort on message size errors */
+ len = fm10k_sm_mbx_receive(hw, mbx, tail);
+ if (len < 0)
+ return len;
+
+ /* continue until we have flushed the Rx FIFO */
+ } while (len);
+
+send_reply:
+ fm10k_sm_mbx_create_reply(hw, mbx, head);
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_sm_mbx_process - Process switch manager mailbox interrupt
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ *
+ * This function will process incoming mailbox events and generate mailbox
+ * replies. It will return a value indicating the number of DWORDs
+ * transmitted excluding header on success or a negative value on error.
+ **/
+STATIC s32 fm10k_sm_mbx_process(struct fm10k_hw *hw,
+ struct fm10k_mbx_info *mbx)
+{
+ s32 err;
+
+ DEBUGFUNC("fm10k_sm_mbx_process");
+
+ /* we do not read mailbox if closed */
+ if (mbx->state == FM10K_STATE_CLOSED)
+ return FM10K_SUCCESS;
+
+ /* retrieve data from switch manager */
+ err = fm10k_mbx_read(hw, mbx);
+ if (err)
+ return err;
+
+ err = fm10k_sm_mbx_validate_fifo_hdr(mbx);
+ if (err < 0)
+ goto fifo_err;
+
+ if (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, SM_ERR)) {
+ fm10k_sm_mbx_process_error(mbx);
+ goto fifo_err;
+ }
+
+ switch (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, SM_VER)) {
+ case 0:
+ fm10k_sm_mbx_process_reset(hw, mbx);
+ break;
+ case FM10K_SM_MBX_VERSION:
+ err = fm10k_sm_mbx_process_version_1(hw, mbx);
+ break;
+ }
+
+fifo_err:
+ if (err < 0)
+ fm10k_sm_mbx_create_error_msg(mbx, err);
+
+ /* report data to switch manager */
+ fm10k_mbx_write(hw, mbx);
+
+ return err;
+}
+
+/**
+ * fm10k_sm_mbx_init - Initialize mailbox memory for PF/SM mailbox
+ * @hw: pointer to hardware structure
+ * @mbx: pointer to mailbox
+ * @msg_data: handlers for mailbox events
+ *
+ * This function initializes the PF/SM mailbox for use. It will split the
+ * buffer provided and use that to populate both the Tx and Rx FIFO by
+ * evenly splitting it. In order to allow for easy masking of head/tail
+ * the value reported in size must be a power of 2 and is reported in
+ * DWORDs, not bytes. Any invalid values will cause the mailbox to return
+ * error.
+ **/
+s32 fm10k_sm_mbx_init(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx,
+ const struct fm10k_msg_data *msg_data)
+{
+ DEBUGFUNC("fm10k_sm_mbx_init");
+ UNREFERENCED_1PARAMETER(hw);
+
+ mbx->mbx_reg = FM10K_GMBX;
+ mbx->mbmem_reg = FM10K_MBMEM_PF(0);
+
+ /* start out in closed state */
+ mbx->state = FM10K_STATE_CLOSED;
+
+ /* validate layout of handlers before assigning them */
+ if (fm10k_mbx_validate_handlers(msg_data))
+ return FM10K_ERR_PARAM;
+
+ /* initialize the message handlers */
+ mbx->msg_data = msg_data;
+
+ /* start mailbox as timed out and let the reset_hw call
+ * set the timeout value to begin communications
+ */
+ mbx->timeout = 0;
+ mbx->usec_delay = FM10K_MBX_INIT_DELAY;
+
+ /* Split buffer for use by Tx/Rx FIFOs */
+ mbx->max_size = FM10K_MBX_MSG_MAX_SIZE;
+ mbx->mbmem_len = FM10K_MBMEM_PF_XOR;
+
+ /* initialize the FIFOs, sizes are in 4 byte increments */
+ fm10k_fifo_init(&mbx->tx, mbx->buffer, FM10K_MBX_TX_BUFFER_SIZE);
+ fm10k_fifo_init(&mbx->rx, &mbx->buffer[FM10K_MBX_TX_BUFFER_SIZE],
+ FM10K_MBX_RX_BUFFER_SIZE);
+
+ /* initialize function pointers */
+ mbx->ops.connect = fm10k_sm_mbx_connect;
+ mbx->ops.disconnect = fm10k_sm_mbx_disconnect;
+ mbx->ops.rx_ready = fm10k_mbx_rx_ready;
+ mbx->ops.tx_ready = fm10k_mbx_tx_ready;
+ mbx->ops.tx_complete = fm10k_mbx_tx_complete;
+ mbx->ops.enqueue_tx = fm10k_mbx_enqueue_tx;
+ mbx->ops.process = fm10k_sm_mbx_process;
+ mbx->ops.register_handlers = fm10k_mbx_register_handlers;
+
+ return FM10K_SUCCESS;
+}
Code Review / deb_dpdk.git / blobdiff