--- /dev/null
+/*******************************************************************************
+
+Copyright (c) 2013 - 2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "fm10k_vf.h"
+
+/**
+ * fm10k_stop_hw_vf - Stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ **/
+STATIC s32 fm10k_stop_hw_vf(struct fm10k_hw *hw)
+{
+ u8 *perm_addr = hw->mac.perm_addr;
+ u32 bal = 0, bah = 0, tdlen;
+ s32 err;
+ u16 i;
+
+ DEBUGFUNC("fm10k_stop_hw_vf");
+
+ /* we need to disable the queues before taking further steps */
+ err = fm10k_stop_hw_generic(hw);
+ if (err)
+ return err;
+
+ /* If permanent address is set then we need to restore it */
+ if (FM10K_IS_VALID_ETHER_ADDR(perm_addr)) {
+ bal = (((u32)perm_addr[3]) << 24) |
+ (((u32)perm_addr[4]) << 16) |
+ (((u32)perm_addr[5]) << 8);
+ bah = (((u32)0xFF) << 24) |
+ (((u32)perm_addr[0]) << 16) |
+ (((u32)perm_addr[1]) << 8) |
+ ((u32)perm_addr[2]);
+ }
+
+ /* restore default itr_scale for next VF initialization */
+ tdlen = hw->mac.itr_scale << FM10K_TDLEN_ITR_SCALE_SHIFT;
+
+ /* The queues have already been disabled so we just need to
+ * update their base address registers
+ */
+ for (i = 0; i < hw->mac.max_queues; i++) {
+ FM10K_WRITE_REG(hw, FM10K_TDBAL(i), bal);
+ FM10K_WRITE_REG(hw, FM10K_TDBAH(i), bah);
+ FM10K_WRITE_REG(hw, FM10K_RDBAL(i), bal);
+ FM10K_WRITE_REG(hw, FM10K_RDBAH(i), bah);
+ /* Restore ITR scale in software-defined mechanism in TDLEN
+ * for next VF initialization. See definition of
+ * FM10K_TDLEN_ITR_SCALE_SHIFT for more details on the use of
+ * TDLEN here.
+ */
+ FM10K_WRITE_REG(hw, FM10K_TDLEN(i), tdlen);
+ }
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_reset_hw_vf - VF hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * This function should return the hardware to a state similar to the
+ * one it is in after just being initialized.
+ **/
+STATIC s32 fm10k_reset_hw_vf(struct fm10k_hw *hw)
+{
+ s32 err;
+
+ DEBUGFUNC("fm10k_reset_hw_vf");
+
+ /* shut down queues we own and reset DMA configuration */
+ err = fm10k_stop_hw_vf(hw);
+ if (err)
+ return err;
+
+ /* Inititate VF reset */
+ FM10K_WRITE_REG(hw, FM10K_VFCTRL, FM10K_VFCTRL_RST);
+
+ /* Flush write and allow 100us for reset to complete */
+ FM10K_WRITE_FLUSH(hw);
+ usec_delay(FM10K_RESET_TIMEOUT);
+
+ /* Clear reset bit and verify it was cleared */
+ FM10K_WRITE_REG(hw, FM10K_VFCTRL, 0);
+ if (FM10K_READ_REG(hw, FM10K_VFCTRL) & FM10K_VFCTRL_RST)
+ err = FM10K_ERR_RESET_FAILED;
+
+ return err;
+}
+
+/**
+ * fm10k_init_hw_vf - VF hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ **/
+STATIC s32 fm10k_init_hw_vf(struct fm10k_hw *hw)
+{
+ u32 tqdloc, tqdloc0 = ~FM10K_READ_REG(hw, FM10K_TQDLOC(0));
+ s32 err;
+ u16 i;
+
+ DEBUGFUNC("fm10k_init_hw_vf");
+
+ /* verify we have at least 1 queue */
+ if (!~FM10K_READ_REG(hw, FM10K_TXQCTL(0)) ||
+ !~FM10K_READ_REG(hw, FM10K_RXQCTL(0))) {
+ err = FM10K_ERR_NO_RESOURCES;
+ goto reset_max_queues;
+ }
+
+ /* determine how many queues we have */
+ for (i = 1; tqdloc0 && (i < FM10K_MAX_QUEUES_POOL); i++) {
+ /* verify the Descriptor cache offsets are increasing */
+ tqdloc = ~FM10K_READ_REG(hw, FM10K_TQDLOC(i));
+ if (!tqdloc || (tqdloc == tqdloc0))
+ break;
+
+ /* check to verify the PF doesn't own any of our queues */
+ if (!~FM10K_READ_REG(hw, FM10K_TXQCTL(i)) ||
+ !~FM10K_READ_REG(hw, FM10K_RXQCTL(i)))
+ break;
+ }
+
+ /* shut down queues we own and reset DMA configuration */
+ err = fm10k_disable_queues_generic(hw, i);
+ if (err)
+ goto reset_max_queues;
+
+ /* record maximum queue count */
+ hw->mac.max_queues = i;
+
+ /* fetch default VLAN and ITR scale */
+ hw->mac.default_vid = (FM10K_READ_REG(hw, FM10K_TXQCTL(0)) &
+ FM10K_TXQCTL_VID_MASK) >> FM10K_TXQCTL_VID_SHIFT;
+ /* Read the ITR scale from TDLEN. See the definition of
+ * FM10K_TDLEN_ITR_SCALE_SHIFT for more information about how TDLEN is
+ * used here.
+ */
+ hw->mac.itr_scale = (FM10K_READ_REG(hw, FM10K_TDLEN(0)) &
+ FM10K_TDLEN_ITR_SCALE_MASK) >>
+ FM10K_TDLEN_ITR_SCALE_SHIFT;
+
+ return FM10K_SUCCESS;
+
+reset_max_queues:
+ hw->mac.max_queues = 0;
+
+ return err;
+}
+
+#ifndef NO_IS_SLOT_APPROPRIATE_CHECK
+/**
+ * fm10k_is_slot_appropriate_vf - Indicate appropriate slot for this SKU
+ * @hw: pointer to hardware structure
+ *
+ * Looks at the PCIe bus info to confirm whether or not this slot can support
+ * the necessary bandwidth for this device. Since the VF has no control over
+ * the "slot" it is in, always indicate that the slot is appropriate.
+ **/
+STATIC bool fm10k_is_slot_appropriate_vf(struct fm10k_hw *hw)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ DEBUGFUNC("fm10k_is_slot_appropriate_vf");
+
+ return TRUE;
+}
+
+#endif
+/* This structure defines the attibutes to be parsed below */
+const struct fm10k_tlv_attr fm10k_mac_vlan_msg_attr[] = {
+ FM10K_TLV_ATTR_U32(FM10K_MAC_VLAN_MSG_VLAN),
+ FM10K_TLV_ATTR_BOOL(FM10K_MAC_VLAN_MSG_SET),
+ FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MAC),
+ FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_DEFAULT_MAC),
+ FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MULTICAST),
+ FM10K_TLV_ATTR_LAST
+};
+
+/**
+ * fm10k_update_vlan_vf - Update status of VLAN ID in VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vid: VLAN ID to add to table
+ * @vsi: Reserved, should always be 0
+ * @set: Indicates if this is a set or clear operation
+ *
+ * This function adds or removes the corresponding VLAN ID from the VLAN
+ * filter table for this VF.
+ **/
+STATIC s32 fm10k_update_vlan_vf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[4];
+
+ /* verify the index is not set */
+ if (vsi)
+ return FM10K_ERR_PARAM;
+
+ /* verify upper 4 bits of vid and length are 0 */
+ if ((vid << 16 | vid) >> 28)
+ return FM10K_ERR_PARAM;
+
+ /* encode set bit into the VLAN ID */
+ if (!set)
+ vid |= FM10K_VLAN_CLEAR;
+
+ /* generate VLAN request */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
+ fm10k_tlv_attr_put_u32(msg, FM10K_MAC_VLAN_MSG_VLAN, vid);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_msg_mac_vlan_vf - Read device MAC address from mailbox message
+ * @hw: pointer to the HW structure
+ * @results: Attributes for message
+ * @mbx: unused mailbox data
+ *
+ * This function should determine the MAC address for the VF
+ **/
+s32 fm10k_msg_mac_vlan_vf(struct fm10k_hw *hw, u32 **results,
+ struct fm10k_mbx_info *mbx)
+{
+ u8 perm_addr[ETH_ALEN];
+ u16 vid;
+ s32 err;
+
+ UNREFERENCED_1PARAMETER(mbx);
+ DEBUGFUNC("fm10k_msg_mac_vlan_vf");
+
+ /* record MAC address requested */
+ err = fm10k_tlv_attr_get_mac_vlan(
+ results[FM10K_MAC_VLAN_MSG_DEFAULT_MAC],
+ perm_addr, &vid);
+ if (err)
+ return err;
+
+ memcpy(hw->mac.perm_addr, perm_addr, ETH_ALEN);
+ hw->mac.default_vid = vid & (FM10K_VLAN_TABLE_VID_MAX - 1);
+ hw->mac.vlan_override = !!(vid & FM10K_VLAN_CLEAR);
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_read_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * This function should determine the MAC address for the VF
+ **/
+STATIC s32 fm10k_read_mac_addr_vf(struct fm10k_hw *hw)
+{
+ u8 perm_addr[ETH_ALEN];
+ u32 base_addr;
+
+ DEBUGFUNC("fm10k_read_mac_addr_vf");
+
+ base_addr = FM10K_READ_REG(hw, FM10K_TDBAL(0));
+
+ /* last byte should be 0 */
+ if (base_addr << 24)
+ return FM10K_ERR_INVALID_MAC_ADDR;
+
+ perm_addr[3] = (u8)(base_addr >> 24);
+ perm_addr[4] = (u8)(base_addr >> 16);
+ perm_addr[5] = (u8)(base_addr >> 8);
+
+ base_addr = FM10K_READ_REG(hw, FM10K_TDBAH(0));
+
+ /* first byte should be all 1's */
+ if ((~base_addr) >> 24)
+ return FM10K_ERR_INVALID_MAC_ADDR;
+
+ perm_addr[0] = (u8)(base_addr >> 16);
+ perm_addr[1] = (u8)(base_addr >> 8);
+ perm_addr[2] = (u8)(base_addr);
+
+ memcpy(hw->mac.perm_addr, perm_addr, ETH_ALEN);
+ memcpy(hw->mac.addr, perm_addr, ETH_ALEN);
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_update_uc_addr_vf - Update device unicast addresses
+ * @hw: pointer to the HW structure
+ * @glort: unused
+ * @mac: MAC address to add/remove from table
+ * @vid: VLAN ID to add/remove from table
+ * @add: Indicates if this is an add or remove operation
+ * @flags: flags field to indicate add and secure - unused
+ *
+ * This function is used to add or remove unicast MAC addresses for
+ * the VF.
+ **/
+STATIC s32 fm10k_update_uc_addr_vf(struct fm10k_hw *hw, u16 glort,
+ const u8 *mac, u16 vid, bool add, u8 flags)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[7];
+
+ DEBUGFUNC("fm10k_update_uc_addr_vf");
+
+ UNREFERENCED_2PARAMETER(glort, flags);
+
+ /* verify VLAN ID is valid */
+ if (vid >= FM10K_VLAN_TABLE_VID_MAX)
+ return FM10K_ERR_PARAM;
+
+ /* verify MAC address is valid */
+ if (!FM10K_IS_VALID_ETHER_ADDR(mac))
+ return FM10K_ERR_PARAM;
+
+ /* verify we are not locked down on the MAC address */
+ if (FM10K_IS_VALID_ETHER_ADDR(hw->mac.perm_addr) &&
+ memcmp(hw->mac.perm_addr, mac, ETH_ALEN))
+ return FM10K_ERR_PARAM;
+
+ /* add bit to notify us if this is a set or clear operation */
+ if (!add)
+ vid |= FM10K_VLAN_CLEAR;
+
+ /* generate VLAN request */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
+ fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MAC, mac, vid);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_update_mc_addr_vf - Update device multicast addresses
+ * @hw: pointer to the HW structure
+ * @glort: unused
+ * @mac: MAC address to add/remove from table
+ * @vid: VLAN ID to add/remove from table
+ * @add: Indicates if this is an add or remove operation
+ *
+ * This function is used to add or remove multicast MAC addresses for
+ * the VF.
+ **/
+STATIC s32 fm10k_update_mc_addr_vf(struct fm10k_hw *hw, u16 glort,
+ const u8 *mac, u16 vid, bool add)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[7];
+
+ DEBUGFUNC("fm10k_update_uc_addr_vf");
+
+ UNREFERENCED_1PARAMETER(glort);
+
+ /* verify VLAN ID is valid */
+ if (vid >= FM10K_VLAN_TABLE_VID_MAX)
+ return FM10K_ERR_PARAM;
+
+ /* verify multicast address is valid */
+ if (!FM10K_IS_MULTICAST_ETHER_ADDR(mac))
+ return FM10K_ERR_PARAM;
+
+ /* add bit to notify us if this is a set or clear operation */
+ if (!add)
+ vid |= FM10K_VLAN_CLEAR;
+
+ /* generate VLAN request */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
+ fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MULTICAST,
+ mac, vid);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_update_int_moderator_vf - Request update of interrupt moderator list
+ * @hw: pointer to hardware structure
+ *
+ * This function will issue a request to the PF to rescan our MSI-X table
+ * and to update the interrupt moderator linked list.
+ **/
+STATIC void fm10k_update_int_moderator_vf(struct fm10k_hw *hw)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[1];
+
+ /* generate MSI-X request */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MSIX);
+
+ /* load onto outgoing mailbox */
+ mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/* This structure defines the attibutes to be parsed below */
+const struct fm10k_tlv_attr fm10k_lport_state_msg_attr[] = {
+ FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_DISABLE),
+ FM10K_TLV_ATTR_U8(FM10K_LPORT_STATE_MSG_XCAST_MODE),
+ FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_READY),
+ FM10K_TLV_ATTR_LAST
+};
+
+/**
+ * fm10k_msg_lport_state_vf - Message handler for lport_state message from PF
+ * @hw: Pointer to hardware structure
+ * @results: pointer array containing parsed data
+ * @mbx: Pointer to mailbox information structure
+ *
+ * This handler is meant to capture the indication from the PF that we
+ * are ready to bring up the interface.
+ **/
+s32 fm10k_msg_lport_state_vf(struct fm10k_hw *hw, u32 **results,
+ struct fm10k_mbx_info *mbx)
+{
+ UNREFERENCED_1PARAMETER(mbx);
+ DEBUGFUNC("fm10k_msg_lport_state_vf");
+
+ hw->mac.dglort_map = !results[FM10K_LPORT_STATE_MSG_READY] ?
+ FM10K_DGLORTMAP_NONE : FM10K_DGLORTMAP_ZERO;
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_update_lport_state_vf - Update device state in lower device
+ * @hw: pointer to the HW structure
+ * @glort: unused
+ * @count: number of logical ports to enable - unused (always 1)
+ * @enable: boolean value indicating if this is an enable or disable request
+ *
+ * Notify the lower device of a state change. If the lower device is
+ * enabled we can add filters, if it is disabled all filters for this
+ * logical port are flushed.
+ **/
+STATIC s32 fm10k_update_lport_state_vf(struct fm10k_hw *hw, u16 glort,
+ u16 count, bool enable)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[2];
+
+ UNREFERENCED_2PARAMETER(glort, count);
+ DEBUGFUNC("fm10k_update_lport_state_vf");
+
+ /* reset glort mask 0 as we have to wait to be enabled */
+ hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
+
+ /* generate port state request */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
+ if (!enable)
+ fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_DISABLE);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_update_xcast_mode_vf - Request update of multicast mode
+ * @hw: pointer to hardware structure
+ * @glort: unused
+ * @mode: integer value indicating mode being requested
+ *
+ * This function will attempt to request a higher mode for the port
+ * so that it can enable either multicast, multicast promiscuous, or
+ * promiscuous mode of operation.
+ **/
+STATIC s32 fm10k_update_xcast_mode_vf(struct fm10k_hw *hw, u16 glort, u8 mode)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[3];
+
+ UNREFERENCED_1PARAMETER(glort);
+ DEBUGFUNC("fm10k_update_xcast_mode_vf");
+
+ if (mode > FM10K_XCAST_MODE_NONE)
+ return FM10K_ERR_PARAM;
+
+ /* generate message requesting to change xcast mode */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
+ fm10k_tlv_attr_put_u8(msg, FM10K_LPORT_STATE_MSG_XCAST_MODE, mode);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+const struct fm10k_tlv_attr fm10k_1588_msg_attr[] = {
+ FM10K_TLV_ATTR_U64(FM10K_1588_MSG_CLK_OFFSET),
+ FM10K_TLV_ATTR_LAST
+};
+
+/* currently there is no shared 1588 message handler */
+
+/**
+ * fm10k_update_hw_stats_vf - Updates hardware related statistics of VF
+ * @hw: pointer to hardware structure
+ * @stats: pointer to statistics structure
+ *
+ * This function collects and aggregates per queue hardware statistics.
+ **/
+STATIC void fm10k_update_hw_stats_vf(struct fm10k_hw *hw,
+ struct fm10k_hw_stats *stats)
+{
+ DEBUGFUNC("fm10k_update_hw_stats_vf");
+
+ fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues);
+}
+
+/**
+ * fm10k_rebind_hw_stats_vf - Resets base for hardware statistics of VF
+ * @hw: pointer to hardware structure
+ * @stats: pointer to the stats structure to update
+ *
+ * This function resets the base for queue hardware statistics.
+ **/
+STATIC void fm10k_rebind_hw_stats_vf(struct fm10k_hw *hw,
+ struct fm10k_hw_stats *stats)
+{
+ DEBUGFUNC("fm10k_rebind_hw_stats_vf");
+
+ /* Unbind Queue Statistics */
+ fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues);
+
+ /* Reinitialize bases for all stats */
+ fm10k_update_hw_stats_vf(hw, stats);
+}
+
+/**
+ * fm10k_configure_dglort_map_vf - Configures GLORT entry and queues
+ * @hw: pointer to hardware structure
+ * @dglort: pointer to dglort configuration structure
+ *
+ * Reads the configuration structure contained in dglort_cfg and uses
+ * that information to then populate a DGLORTMAP/DEC entry and the queues
+ * to which it has been assigned.
+ **/
+STATIC s32 fm10k_configure_dglort_map_vf(struct fm10k_hw *hw,
+ struct fm10k_dglort_cfg *dglort)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ DEBUGFUNC("fm10k_configure_dglort_map_vf");
+
+ /* verify the dglort pointer */
+ if (!dglort)
+ return FM10K_ERR_PARAM;
+
+ /* stub for now until we determine correct message for this */
+
+ return FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_adjust_systime_vf - Adjust systime frequency
+ * @hw: pointer to hardware structure
+ * @ppb: adjustment rate in parts per billion
+ *
+ * This function takes an adjustment rate in parts per billion and will
+ * verify that this value is 0 as the VF cannot support adjusting the
+ * systime clock.
+ *
+ * If the ppb value is non-zero the return is ERR_PARAM else success
+ **/
+STATIC s32 fm10k_adjust_systime_vf(struct fm10k_hw *hw, s32 ppb)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ DEBUGFUNC("fm10k_adjust_systime_vf");
+
+ /* The VF cannot adjust the clock frequency, however it should
+ * already have a syntonic clock with whichever host interface is
+ * running as the master for the host interface clock domain so
+ * there should be not frequency adjustment necessary.
+ */
+ return ppb ? FM10K_ERR_PARAM : FM10K_SUCCESS;
+}
+
+/**
+ * fm10k_read_systime_vf - Reads value of systime registers
+ * @hw: pointer to the hardware structure
+ *
+ * Function reads the content of 2 registers, combined to represent a 64 bit
+ * value measured in nanoseconds. In order to guarantee the value is accurate
+ * we check the 32 most significant bits both before and after reading the
+ * 32 least significant bits to verify they didn't change as we were reading
+ * the registers.
+ **/
+static u64 fm10k_read_systime_vf(struct fm10k_hw *hw)
+{
+ u32 systime_l, systime_h, systime_tmp;
+
+ systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1);
+
+ do {
+ systime_tmp = systime_h;
+ systime_l = fm10k_read_reg(hw, FM10K_VFSYSTIME);
+ systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1);
+ } while (systime_tmp != systime_h);
+
+ return ((u64)systime_h << 32) | systime_l;
+}
+
+static const struct fm10k_msg_data fm10k_msg_data_vf[] = {
+ FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
+ FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_msg_mac_vlan_vf),
+ FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
+ FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
+};
+
+/**
+ * fm10k_init_ops_vf - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for VF.
+ * Does not touch the hardware.
+ **/
+s32 fm10k_init_ops_vf(struct fm10k_hw *hw)
+{
+ struct fm10k_mac_info *mac = &hw->mac;
+
+ DEBUGFUNC("fm10k_init_ops_vf");
+
+ fm10k_init_ops_generic(hw);
+
+ mac->ops.reset_hw = &fm10k_reset_hw_vf;
+ mac->ops.init_hw = &fm10k_init_hw_vf;
+ mac->ops.start_hw = &fm10k_start_hw_generic;
+ mac->ops.stop_hw = &fm10k_stop_hw_vf;
+#ifndef NO_IS_SLOT_APPROPRIATE_CHECK
+ mac->ops.is_slot_appropriate = &fm10k_is_slot_appropriate_vf;
+#endif
+ mac->ops.update_vlan = &fm10k_update_vlan_vf;
+ mac->ops.read_mac_addr = &fm10k_read_mac_addr_vf;
+ mac->ops.update_uc_addr = &fm10k_update_uc_addr_vf;
+ mac->ops.update_mc_addr = &fm10k_update_mc_addr_vf;
+ mac->ops.update_xcast_mode = &fm10k_update_xcast_mode_vf;
+ mac->ops.update_int_moderator = &fm10k_update_int_moderator_vf;
+ mac->ops.update_lport_state = &fm10k_update_lport_state_vf;
+ mac->ops.update_hw_stats = &fm10k_update_hw_stats_vf;
+ mac->ops.rebind_hw_stats = &fm10k_rebind_hw_stats_vf;
+ mac->ops.configure_dglort_map = &fm10k_configure_dglort_map_vf;
+ mac->ops.get_host_state = &fm10k_get_host_state_generic;
+ mac->ops.adjust_systime = &fm10k_adjust_systime_vf;
+ mac->ops.read_systime = &fm10k_read_systime_vf;
+
+ mac->max_msix_vectors = fm10k_get_pcie_msix_count_generic(hw);
+
+ return fm10k_pfvf_mbx_init(hw, &hw->mbx, fm10k_msg_data_vf, 0);
+}
Code Review / deb_dpdk.git / blobdiff