--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2013-2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FM10K_H_
+#define _FM10K_H_
+
+#include <stdint.h>
+#include <rte_mbuf.h>
+#include <rte_mempool.h>
+#include <rte_malloc.h>
+#include <rte_spinlock.h>
+#include "fm10k_logs.h"
+#include "base/fm10k_type.h"
+
+/* descriptor ring base addresses must be aligned to the following */
+#define FM10K_ALIGN_RX_DESC 128
+#define FM10K_ALIGN_TX_DESC 128
+
+/* The maximum packet size that FM10K supports */
+#define FM10K_MAX_PKT_SIZE (15 * 1024)
+
+/* Minimum size of RX buffer FM10K supported */
+#define FM10K_MIN_RX_BUF_SIZE 256
+
+/* The maximum of SRIOV VFs per port supported */
+#define FM10K_MAX_VF_NUM 64
+
+/* number of descriptors must be a multiple of the following */
+#define FM10K_MULT_RX_DESC FM10K_REQ_RX_DESCRIPTOR_MULTIPLE
+#define FM10K_MULT_TX_DESC FM10K_REQ_TX_DESCRIPTOR_MULTIPLE
+
+/* maximum size of descriptor rings */
+#define FM10K_MAX_RX_RING_SZ (512 * 1024)
+#define FM10K_MAX_TX_RING_SZ (512 * 1024)
+
+/* minimum and maximum number of descriptors in a ring */
+#define FM10K_MIN_RX_DESC 32
+#define FM10K_MIN_TX_DESC 32
+#define FM10K_MAX_RX_DESC (FM10K_MAX_RX_RING_SZ / sizeof(union fm10k_rx_desc))
+#define FM10K_MAX_TX_DESC (FM10K_MAX_TX_RING_SZ / sizeof(struct fm10k_tx_desc))
+
+/*
+ * byte aligment for HW RX data buffer
+ * Datasheet requires RX buffer addresses shall either be 512-byte aligned or
+ * be 8-byte aligned but without crossing host memory pages (4KB alignment
+ * boundaries). Satisfy first option.
+ */
+#define FM10K_RX_DATABUF_ALIGN 512
+
+/*
+ * threshold default, min, max, and divisor constraints
+ * the configured values must satisfy the following:
+ * MIN <= value <= MAX
+ * DIV % value == 0
+ */
+#define FM10K_RX_FREE_THRESH_DEFAULT(rxq) 32
+#define FM10K_RX_FREE_THRESH_MIN(rxq) 1
+#define FM10K_RX_FREE_THRESH_MAX(rxq) ((rxq)->nb_desc - 1)
+#define FM10K_RX_FREE_THRESH_DIV(rxq) ((rxq)->nb_desc)
+
+#define FM10K_TX_FREE_THRESH_DEFAULT(txq) 32
+#define FM10K_TX_FREE_THRESH_MIN(txq) 1
+#define FM10K_TX_FREE_THRESH_MAX(txq) ((txq)->nb_desc - 3)
+#define FM10K_TX_FREE_THRESH_DIV(txq) 0
+
+#define FM10K_DEFAULT_RX_PTHRESH 8
+#define FM10K_DEFAULT_RX_HTHRESH 8
+#define FM10K_DEFAULT_RX_WTHRESH 0
+
+#define FM10K_DEFAULT_TX_PTHRESH 32
+#define FM10K_DEFAULT_TX_HTHRESH 0
+#define FM10K_DEFAULT_TX_WTHRESH 0
+
+#define FM10K_TX_RS_THRESH_DEFAULT(txq) 32
+#define FM10K_TX_RS_THRESH_MIN(txq) 1
+#define FM10K_TX_RS_THRESH_MAX(txq) \
+ RTE_MIN(((txq)->nb_desc - 2), (txq)->free_thresh)
+#define FM10K_TX_RS_THRESH_DIV(txq) ((txq)->nb_desc)
+
+#define FM10K_VLAN_TAG_SIZE 4
+
+/* Maximum number of MAC addresses per PF/VF */
+#define FM10K_MAX_MACADDR_NUM 64
+
+#define FM10K_UINT32_BIT_SIZE (CHAR_BIT * sizeof(uint32_t))
+#define FM10K_VFTA_SIZE (4096 / FM10K_UINT32_BIT_SIZE)
+
+/* vlan_id is a 12 bit number.
+ * The VFTA array is actually a 4096 bit array, 128 of 32bit elements.
+ * 2^5 = 32. The val of lower 5 bits specifies the bit in the 32bit element.
+ * The higher 7 bit val specifies VFTA array index.
+ */
+#define FM10K_VFTA_BIT(vlan_id) (1 << ((vlan_id) & 0x1F))
+#define FM10K_VFTA_IDX(vlan_id) ((vlan_id) >> 5)
+
+#define RTE_FM10K_RXQ_REARM_THRESH 32
+#define RTE_FM10K_VPMD_TX_BURST 32
+#define RTE_FM10K_MAX_RX_BURST RTE_FM10K_RXQ_REARM_THRESH
+#define RTE_FM10K_TX_MAX_FREE_BUF_SZ 64
+#define RTE_FM10K_DESCS_PER_LOOP 4
+
+#define FM10K_MISC_VEC_ID RTE_INTR_VEC_ZERO_OFFSET
+#define FM10K_RX_VEC_START RTE_INTR_VEC_RXTX_OFFSET
+
+#define FM10K_SIMPLE_TX_FLAG ((uint32_t)ETH_TXQ_FLAGS_NOMULTSEGS | \
+ ETH_TXQ_FLAGS_NOOFFLOADS)
+
+struct fm10k_macvlan_filter_info {
+ uint16_t vlan_num; /* Total VLAN number */
+ uint16_t mac_num; /* Total mac number */
+ uint16_t nb_queue_pools; /* Active queue pools number */
+ /* VMDQ ID for each MAC address */
+ uint8_t mac_vmdq_id[FM10K_MAX_MACADDR_NUM];
+ uint32_t vfta[FM10K_VFTA_SIZE]; /* VLAN bitmap */
+};
+
+struct fm10k_dev_info {
+ volatile uint32_t enable;
+ volatile uint32_t glort;
+ /* Protect the mailbox to avoid race condition */
+ rte_spinlock_t mbx_lock;
+ struct fm10k_macvlan_filter_info macvlan;
+ /* Flag to indicate if RX vector conditions satisfied */
+ bool rx_vec_allowed;
+};
+
+/*
+ * Structure to store private data for each driver instance.
+ */
+struct fm10k_adapter {
+ struct fm10k_hw hw;
+ struct fm10k_hw_stats stats;
+ struct fm10k_dev_info info;
+};
+
+#define FM10K_DEV_PRIVATE_TO_HW(adapter) \
+ (&((struct fm10k_adapter *)adapter)->hw)
+
+#define FM10K_DEV_PRIVATE_TO_STATS(adapter) \
+ (&((struct fm10k_adapter *)adapter)->stats)
+
+#define FM10K_DEV_PRIVATE_TO_INFO(adapter) \
+ (&((struct fm10k_adapter *)adapter)->info)
+
+#define FM10K_DEV_PRIVATE_TO_MBXLOCK(adapter) \
+ (&(((struct fm10k_adapter *)adapter)->info.mbx_lock))
+
+#define FM10K_DEV_PRIVATE_TO_MACVLAN(adapter) \
+ (&(((struct fm10k_adapter *)adapter)->info.macvlan))
+
+struct fm10k_rx_queue {
+ struct rte_mempool *mp;
+ struct rte_mbuf **sw_ring;
+ volatile union fm10k_rx_desc *hw_ring;
+ struct rte_mbuf *pkt_first_seg; /* First segment of current packet. */
+ struct rte_mbuf *pkt_last_seg; /* Last segment of current packet. */
+ uint64_t hw_ring_phys_addr;
+ uint64_t mbuf_initializer; /* value to init mbufs */
+ /* need to alloc dummy mbuf, for wraparound when scanning hw ring */
+ struct rte_mbuf fake_mbuf;
+ uint16_t next_dd;
+ uint16_t next_alloc;
+ uint16_t next_trigger;
+ uint16_t alloc_thresh;
+ volatile uint32_t *tail_ptr;
+ uint16_t nb_desc;
+ /* Number of faked desc added at the tail for Vector RX function */
+ uint16_t nb_fake_desc;
+ uint16_t queue_id;
+ /* Below 2 fields only valid in case vPMD is applied. */
+ uint16_t rxrearm_nb; /* number of remaining to be re-armed */
+ uint16_t rxrearm_start; /* the idx we start the re-arming from */
+ uint16_t rx_using_sse; /* indicates that vector RX is in use */
+ uint8_t port_id;
+ uint8_t drop_en;
+ uint8_t rx_deferred_start; /* don't start this queue in dev start. */
+ uint16_t rx_ftag_en; /* indicates FTAG RX supported */
+};
+
+/*
+ * a FIFO is used to track which descriptors have their RS bit set for Tx
+ * queues which are configured to allow multiple descriptors per packet
+ */
+struct fifo {
+ uint16_t *list;
+ uint16_t *head;
+ uint16_t *tail;
+ uint16_t *endp;
+};
+
+struct fm10k_txq_ops;
+
+struct fm10k_tx_queue {
+ struct rte_mbuf **sw_ring;
+ struct fm10k_tx_desc *hw_ring;
+ uint64_t hw_ring_phys_addr;
+ struct fifo rs_tracker;
+ const struct fm10k_txq_ops *ops; /* txq ops */
+ uint16_t last_free;
+ uint16_t next_free;
+ uint16_t nb_free;
+ uint16_t nb_used;
+ uint16_t free_thresh;
+ uint16_t rs_thresh;
+ /* Below 2 fields only valid in case vPMD is applied. */
+ uint16_t next_rs; /* Next pos to set RS flag */
+ uint16_t next_dd; /* Next pos to check DD flag */
+ volatile uint32_t *tail_ptr;
+ uint32_t txq_flags; /* Holds flags for this TXq */
+ uint16_t nb_desc;
+ uint8_t port_id;
+ uint8_t tx_deferred_start; /** don't start this queue in dev start. */
+ uint16_t queue_id;
+ uint16_t tx_ftag_en; /* indicates FTAG TX supported */
+};
+
+struct fm10k_txq_ops {
+ void (*reset)(struct fm10k_tx_queue *txq);
+};
+
+#define MBUF_DMA_ADDR(mb) \
+ ((uint64_t) ((mb)->buf_physaddr + (mb)->data_off))
+
+/* enforce 512B alignment on default Rx DMA addresses */
+#define MBUF_DMA_ADDR_DEFAULT(mb) \
+ ((uint64_t) RTE_ALIGN(((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM),\
+ FM10K_RX_DATABUF_ALIGN))
+
+static inline void fifo_reset(struct fifo *fifo, uint32_t len)
+{
+ fifo->head = fifo->tail = fifo->list;
+ fifo->endp = fifo->list + len;
+}
+
+static inline void fifo_insert(struct fifo *fifo, uint16_t val)
+{
+ *fifo->head = val;
+ if (++fifo->head == fifo->endp)
+ fifo->head = fifo->list;
+}
+
+/* do not worry about list being empty since we only check it once we know
+ * we have used enough descriptors to set the RS bit at least once */
+static inline uint16_t fifo_peek(struct fifo *fifo)
+{
+ return *fifo->tail;
+}
+
+static inline uint16_t fifo_remove(struct fifo *fifo)
+{
+ uint16_t val;
+ val = *fifo->tail;
+ if (++fifo->tail == fifo->endp)
+ fifo->tail = fifo->list;
+ return val;
+}
+
+static inline void
+fm10k_pktmbuf_reset(struct rte_mbuf *mb, uint8_t in_port)
+{
+ rte_mbuf_refcnt_set(mb, 1);
+ mb->next = NULL;
+ mb->nb_segs = 1;
+
+ /* enforce 512B alignment on default Rx virtual addresses */
+ mb->data_off = (uint16_t)(RTE_PTR_ALIGN((char *)mb->buf_addr +
+ RTE_PKTMBUF_HEADROOM, FM10K_RX_DATABUF_ALIGN)
+ - (char *)mb->buf_addr);
+ mb->port = in_port;
+}
+
+/*
+ * Verify Rx packet buffer alignment is valid.
+ *
+ * Hardware requires specific alignment for Rx packet buffers. At
+ * least one of the following two conditions must be satisfied.
+ * 1. Address is 512B aligned
+ * 2. Address is 8B aligned and buffer does not cross 4K boundary.
+ *
+ * Return 1 if buffer alignment satisfies at least one condition,
+ * otherwise return 0.
+ *
+ * Note: Alignment is checked by the driver when the Rx queue is reset. It
+ * is assumed that if an entire descriptor ring can be filled with
+ * buffers containing valid alignment, then all buffers in that mempool
+ * have valid address alignment. It is the responsibility of the user
+ * to ensure all buffers have valid alignment, as it is the user who
+ * creates the mempool.
+ * Note: It is assumed the buffer needs only to store a maximum size Ethernet
+ * frame.
+ */
+static inline int
+fm10k_addr_alignment_valid(struct rte_mbuf *mb)
+{
+ uint64_t addr = MBUF_DMA_ADDR_DEFAULT(mb);
+ uint64_t boundary1, boundary2;
+
+ /* 512B aligned? */
+ if (RTE_ALIGN(addr, FM10K_RX_DATABUF_ALIGN) == addr)
+ return 1;
+
+ /* 8B aligned, and max Ethernet frame would not cross a 4KB boundary? */
+ if (RTE_ALIGN(addr, 8) == addr) {
+ boundary1 = RTE_ALIGN_FLOOR(addr, 4096);
+ boundary2 = RTE_ALIGN_FLOOR(addr + ETHER_MAX_VLAN_FRAME_LEN,
+ 4096);
+ if (boundary1 == boundary2)
+ return 1;
+ }
+
+ PMD_INIT_LOG(ERR, "Error: Invalid buffer alignment!");
+
+ return 0;
+}
+
+/* Rx and Tx prototypes */
+uint16_t fm10k_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
+
+uint16_t fm10k_recv_scattered_pkts(void *rx_queue,
+ struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+
+int
+fm10k_dev_rx_descriptor_done(void *rx_queue, uint16_t offset);
+
+uint16_t fm10k_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+
+int fm10k_rxq_vec_setup(struct fm10k_rx_queue *rxq);
+int fm10k_rx_vec_condition_check(struct rte_eth_dev *);
+void fm10k_rx_queue_release_mbufs_vec(struct fm10k_rx_queue *rxq);
+uint16_t fm10k_recv_pkts_vec(void *, struct rte_mbuf **, uint16_t);
+uint16_t fm10k_recv_scattered_pkts_vec(void *, struct rte_mbuf **,
+ uint16_t);
+uint16_t fm10k_xmit_pkts_vec(void *tx_queue, struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+void fm10k_txq_vec_setup(struct fm10k_tx_queue *txq);
+int fm10k_tx_vec_condition_check(struct fm10k_tx_queue *txq);
+
+#endif
Code Review / deb_dpdk.git / blobdiff