/* Wait interval to get switch status */
#define WAIT_SWITCH_MSG_US 100000
/* A period of quiescence for switch */
-#define FM10K_SWITCH_QUIESCE_US 10000
+#define FM10K_SWITCH_QUIESCE_US 100000
/* Number of chars per uint32 type */
#define CHARS_PER_UINT32 (sizeof(uint32_t))
#define BIT_MASK_PER_UINT32 ((1 << CHARS_PER_UINT32) - 1)
static void fm10k_set_rx_function(struct rte_eth_dev *dev);
static void fm10k_set_tx_function(struct rte_eth_dev *dev);
static int fm10k_check_ftag(struct rte_devargs *devargs);
+static int fm10k_link_update(struct rte_eth_dev *dev, int wait_to_complete);
struct fm10k_xstats_name_off {
char name[RTE_ETH_XSTATS_NAME_SIZE];
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
struct fm10k_macvlan_filter_info *macvlan;
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pdev->intr_handle;
int i, ret;
struct fm10k_rx_queue *rxq;
if (!(dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_VMDQ_FLAG))
fm10k_vlan_filter_set(dev, hw->mac.default_vid, true);
+ fm10k_link_update(dev, 0);
+
return 0;
}
fm10k_dev_stop(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pdev->intr_handle;
int i;
MAX_LPORT_NUM, false);
fm10k_mbx_unlock(hw);
- /* allow 10ms for device to quiesce */
+ /* allow 100ms for device to quiesce */
rte_delay_us(FM10K_SWITCH_QUIESCE_US);
/* Stop mailbox service first */
fm10k_link_update(struct rte_eth_dev *dev,
__rte_unused int wait_to_complete)
{
+ struct fm10k_dev_info *dev_info =
+ FM10K_DEV_PRIVATE_TO_INFO(dev->data->dev_private);
PMD_INIT_FUNC_TRACE();
- /* The host-interface link is always up. The speed is ~50Gbps per Gen3
- * x8 PCIe interface. For now, we leave the speed undefined since there
- * is no 50Gbps Ethernet. */
+ /* The speed is ~50Gbps per Gen3 x8 PCIe interface. For now, we
+ * leave the speed undefined since there is no 50Gbps Ethernet.
+ */
dev->data->dev_link.link_speed = 0;
dev->data->dev_link.link_duplex = ETH_LINK_FULL_DUPLEX;
- dev->data->dev_link.link_status = ETH_LINK_UP;
+ dev->data->dev_link.link_status =
+ dev_info->sm_down ? ETH_LINK_DOWN : ETH_LINK_UP;
return 0;
}
return FM10K_NB_XSTATS;
}
-static void
+static int
fm10k_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
{
uint64_t ipackets, opackets, ibytes, obytes;
stats->opackets = opackets;
stats->ibytes = ibytes;
stats->obytes = obytes;
+ return 0;
}
static void
struct rte_eth_dev_info *dev_info)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
PMD_INIT_FUNC_TRACE();
return 0;
}
-static void
-fm10k_vlan_offload_set(__rte_unused struct rte_eth_dev *dev, int mask)
+static int
+fm10k_vlan_offload_set(struct rte_eth_dev *dev, int mask)
{
if (mask & ETH_VLAN_STRIP_MASK) {
if (!dev->data->dev_conf.rxmode.hw_vlan_strip)
if (!dev->data->dev_conf.rxmode.hw_vlan_filter)
PMD_INIT_LOG(ERR, "VLAN filter is always on in fm10k");
}
+
+ return 0;
}
/* Add/Remove a MAC address, and update filters to main VSI */
return -ENOMEM;
}
q->hw_ring = mz->addr;
- q->hw_ring_phys_addr = rte_mem_phy2mch(mz->memseg_id, mz->phys_addr);
+ q->hw_ring_phys_addr = mz->iova;
/* Check if number of descs satisfied Vector requirement */
if (!rte_is_power_of_2(nb_desc)) {
return -ENOMEM;
}
q->hw_ring = mz->addr;
- q->hw_ring_phys_addr = rte_mem_phy2mch(mz->memseg_id, mz->phys_addr);
+ q->hw_ring_phys_addr = mz->iova;
/*
* allocate memory for the RS bit tracker. Enough slots to hold the
fm10k_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
/* Enable ITR */
if (hw->mac.type == fm10k_mac_pf)
fm10k_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
/* Disable ITR */
if (hw->mac.type == fm10k_mac_pf)
fm10k_dev_rxq_interrupt_setup(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pdev->intr_handle;
uint32_t intr_vector, vec;
uint16_t queue_id;
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
uint32_t cause, status;
+ struct fm10k_dev_info *dev_info =
+ FM10K_DEV_PRIVATE_TO_INFO(dev->data->dev_private);
+ int status_mbx;
+ s32 err;
if (hw->mac.type != fm10k_mac_pf)
return;
if (cause & FM10K_EICR_SWITCHNOTREADY)
PMD_INIT_LOG(ERR, "INT: Switch is not ready");
- if (cause & FM10K_EICR_SWITCHREADY)
+ if (cause & FM10K_EICR_SWITCHREADY) {
PMD_INIT_LOG(INFO, "INT: Switch is ready");
+ if (dev_info->sm_down == 1) {
+ fm10k_mbx_lock(hw);
+
+ /* For recreating logical ports */
+ status_mbx = hw->mac.ops.update_lport_state(hw,
+ hw->mac.dglort_map, MAX_LPORT_NUM, 1);
+ if (status_mbx == FM10K_SUCCESS)
+ PMD_INIT_LOG(INFO,
+ "INT: Recreated Logical port");
+ else
+ PMD_INIT_LOG(INFO,
+ "INT: Logical ports weren't recreated");
+
+ status_mbx = hw->mac.ops.update_xcast_mode(hw,
+ hw->mac.dglort_map, FM10K_XCAST_MODE_NONE);
+ if (status_mbx != FM10K_SUCCESS)
+ PMD_INIT_LOG(ERR, "Failed to set XCAST mode");
+
+ fm10k_mbx_unlock(hw);
+
+ /* first clear the internal SW recording structure */
+ if (!(dev->data->dev_conf.rxmode.mq_mode &
+ ETH_MQ_RX_VMDQ_FLAG))
+ fm10k_vlan_filter_set(dev, hw->mac.default_vid,
+ false);
+
+ fm10k_MAC_filter_set(dev, hw->mac.addr, false,
+ MAIN_VSI_POOL_NUMBER);
+
+ /*
+ * Add default mac address and vlan for the logical
+ * ports that have been created, leave to the
+ * application to fully recover Rx filtering.
+ */
+ fm10k_MAC_filter_set(dev, hw->mac.addr, true,
+ MAIN_VSI_POOL_NUMBER);
+
+ if (!(dev->data->dev_conf.rxmode.mq_mode &
+ ETH_MQ_RX_VMDQ_FLAG))
+ fm10k_vlan_filter_set(dev, hw->mac.default_vid,
+ true);
+
+ dev_info->sm_down = 0;
+ _rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ }
+ }
/* Handle mailbox message */
fm10k_mbx_lock(hw);
- hw->mbx.ops.process(hw, &hw->mbx);
+ err = hw->mbx.ops.process(hw, &hw->mbx);
fm10k_mbx_unlock(hw);
+ if (err == FM10K_ERR_RESET_REQUESTED) {
+ PMD_INIT_LOG(INFO, "INT: Switch is down");
+ dev_info->sm_down = 1;
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ }
+
/* Handle SRAM error */
if (cause & FM10K_EICR_SRAMERROR) {
PMD_INIT_LOG(ERR, "INT: SRAM error on PEP");
{
struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ struct fm10k_dev_info *dev_info =
+ FM10K_DEV_PRIVATE_TO_INFO(dev->data->dev_private);
+ const enum fm10k_mbx_state state = mbx->state;
+ int status_mbx;
if (hw->mac.type != fm10k_mac_vf)
return;
hw->mbx.ops.process(hw, &hw->mbx);
fm10k_mbx_unlock(hw);
+ if (state == FM10K_STATE_OPEN && mbx->state == FM10K_STATE_CONNECT) {
+ PMD_INIT_LOG(INFO, "INT: Switch has gone down");
+
+ fm10k_mbx_lock(hw);
+ hw->mac.ops.update_lport_state(hw, hw->mac.dglort_map,
+ MAX_LPORT_NUM, 1);
+ fm10k_mbx_unlock(hw);
+
+ /* Setting reset flag */
+ dev_info->sm_down = 1;
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ }
+
+ if (dev_info->sm_down == 1 &&
+ hw->mac.dglort_map == FM10K_DGLORTMAP_ZERO) {
+ PMD_INIT_LOG(INFO, "INT: Switch has gone up");
+ fm10k_mbx_lock(hw);
+ status_mbx = hw->mac.ops.update_xcast_mode(hw,
+ hw->mac.dglort_map, FM10K_XCAST_MODE_NONE);
+ if (status_mbx != FM10K_SUCCESS)
+ PMD_INIT_LOG(ERR, "Failed to set XCAST mode");
+ fm10k_mbx_unlock(hw);
+
+ /* first clear the internal SW recording structure */
+ fm10k_vlan_filter_set(dev, hw->mac.default_vid, false);
+ fm10k_MAC_filter_set(dev, hw->mac.addr, false,
+ MAIN_VSI_POOL_NUMBER);
+
+ /*
+ * Add default mac address and vlan for the logical ports that
+ * have been created, leave to the application to fully recover
+ * Rx filtering.
+ */
+ fm10k_MAC_filter_set(dev, hw->mac.addr, true,
+ MAIN_VSI_POOL_NUMBER);
+ fm10k_vlan_filter_set(dev, hw->mac.default_vid, true);
+
+ dev_info->sm_down = 0;
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
+ }
+
/* Re-enable interrupt from device side */
FM10K_WRITE_REG(hw, FM10K_VFITR(0), FM10K_ITR_AUTOMASK |
FM10K_ITR_MASK_CLEAR);
eth_fm10k_dev_init(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pdev->intr_handle;
int diag, i;
struct fm10k_macvlan_filter_info *macvlan;
}
rte_eth_copy_pci_info(dev, pdev);
- dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
macvlan = FM10K_DEV_PRIVATE_TO_MACVLAN(dev->data->dev_private);
memset(macvlan, 0, sizeof(*macvlan));
eth_fm10k_dev_uninit(struct rte_eth_dev *dev)
{
struct fm10k_hw *hw = FM10K_DEV_PRIVATE_TO_HW(dev->data->dev_private);
- struct rte_pci_device *pdev = RTE_DEV_TO_PCI(dev->device);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(dev);
struct rte_intr_handle *intr_handle = &pdev->intr_handle;
PMD_INIT_FUNC_TRACE();
static struct rte_pci_driver rte_pmd_fm10k = {
.id_table = pci_id_fm10k_map,
- .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC,
+ .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC |
+ RTE_PCI_DRV_IOVA_AS_VA,
.probe = eth_fm10k_pci_probe,
.remove = eth_fm10k_pci_remove,
};
Code Review / deb_dpdk.git / blobdiff