-/*******************************************************************************
-
-Copyright (c) 2001-2015, Intel Corporation
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are met:
-
- 1. Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- 2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- 3. Neither the name of the Intel Corporation nor the names of its
- contributors may be used to endorse or promote products derived from
- this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-***************************************************************************/
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2001-2018
+ */
#include "ixgbe_api.h"
#include "ixgbe_common.h"
case IXGBE_DEV_ID_82599_QSFP_SF_QP:
case IXGBE_DEV_ID_82599EN_SFP:
case IXGBE_DEV_ID_82599_CX4:
- case IXGBE_DEV_ID_82599_LS:
case IXGBE_DEV_ID_82599_T3_LOM:
hw->mac.type = ixgbe_mac_82599EB;
break;
case IXGBE_DEV_ID_X550EM_X_10G_T:
case IXGBE_DEV_ID_X550EM_X_1G_T:
case IXGBE_DEV_ID_X550EM_X_SFP:
+ case IXGBE_DEV_ID_X550EM_X_XFI:
hw->mac.type = ixgbe_mac_X550EM_x;
hw->mvals = ixgbe_mvals_X550EM_x;
break;
* ixgbe_read_phy_reg - Read PHY register
* @hw: pointer to hardware structure
* @reg_addr: 32 bit address of PHY register to read
+ * @device_type: type of device you want to communicate with
* @phy_data: Pointer to read data from PHY register
*
* Reads a value from a specified PHY register
* ixgbe_write_phy_reg - Write PHY register
* @hw: pointer to hardware structure
* @reg_addr: 32 bit PHY register to write
+ * @device_type: type of device you want to communicate with
* @phy_data: Data to write to the PHY register
*
* Writes a value to specified PHY register
/**
* ixgbe_check_phy_link - Determine link and speed status
* @hw: pointer to hardware structure
+ * @speed: link speed
+ * @link_up: true when link is up
*
* Reads a PHY register to determine if link is up and the current speed for
* the PHY.
* ixgbe_setup_phy_link_speed - Set auto advertise
* @hw: pointer to hardware structure
* @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Sets the auto advertised capabilities
**/
/**
* ixgbe_check_link - Get link and speed status
* @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
*
* Reads the links register to determine if link is up and the current speed
**/
* ixgbe_setup_link - Set link speed
* @hw: pointer to hardware structure
* @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Configures link settings. Restarts the link.
* Performs autonegotiation if needed.
* ixgbe_setup_mac_link - Set link speed
* @hw: pointer to hardware structure
* @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
*
* Configures link settings. Restarts the link.
* Performs autonegotiation if needed.
/**
* ixgbe_get_link_capabilities - Returns link capabilities
* @hw: pointer to hardware structure
+ * @speed: link speed capabilities
+ * @autoneg: true when autoneg or autotry is enabled
*
* Determines the link capabilities of the current configuration.
**/
/**
* ixgbe_blink_led_stop - Stop blinking LEDs
* @hw: pointer to hardware structure
+ * @index: led number to stop
*
* Stop blinking LED based on index.
**/
* @mc_addr_list: the list of new multicast addresses
* @mc_addr_count: number of addresses
* @func: iterator function to walk the multicast address list
+ * @clear: flag, when set clears the table beforehand
*
* The given list replaces any existing list. Clears the MC addrs from receive
* address registers and the multicast table. Uses unused receive address
* @min: driver minor number to be sent to firmware
* @build: driver build number to be sent to firmware
* @ver: driver version number to be sent to firmware
+ * @len: length of driver_ver string
+ * @driver_ver: driver string
**/
s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
- u8 ver)
+ u8 ver, u16 len, char *driver_ver)
{
return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min,
- build, ver), IXGBE_NOT_IMPLEMENTED);
+ build, ver, len, driver_ver),
+ IXGBE_NOT_IMPLEMENTED);
}
/**
* ixgbe_set_source_address_pruning - Enable/Disable source address pruning
* @hw: pointer to hardware structure
- * @enbale: enable or disable source address pruning
+ * @enable: enable or disable source address pruning
* @pool: Rx pool - Rx pool to toggle source address pruning
**/
void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
hw->mac.ops.restore_mdd_vf(hw, vf);
}
+/**
+ * ixgbe_fw_recovery_mode - Check if in FW NVM recovery mode
+ * @hw: pointer to hardware structure
+ *
+ **/
+bool ixgbe_fw_recovery_mode(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.fw_recovery_mode)
+ return hw->mac.ops.fw_recovery_mode(hw);
+ return false;
+}
+
/**
* ixgbe_enter_lplu - Transition to low power states
* @hw: pointer to hardware structure
*
* Determines physical layer capabilities of the current configuration.
**/
-u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
+u64 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw)
{
return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer,
(hw), IXGBE_PHYSICAL_LAYER_UNKNOWN);
Code Review / deb_dpdk.git / blobdiff