/* Flow Control */
mac->ops.fc_enable = ixgbe_fc_enable_generic;
mac->ops.setup_fc = ixgbe_setup_fc_generic;
+ mac->ops.fc_autoneg = ixgbe_fc_autoneg;
/* Link */
mac->ops.get_link_capabilities = NULL;
* ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
* @hw: pointer to the HW structure
*
- * Determines the LAN function id by reading memory-mapped registers
- * and swaps the port value if requested.
+ * Determines the LAN function id by reading memory-mapped registers and swaps
+ * the port value if requested, and set MAC instance for devices that share
+ * CS4227.
**/
void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
{
struct ixgbe_bus_info *bus = &hw->bus;
u32 reg;
+ u16 ee_ctrl_4;
DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie");
reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
- bus->lan_id = bus->func;
+ bus->lan_id = (u8)bus->func;
/* check for a port swap */
reg = IXGBE_READ_REG(hw, IXGBE_FACTPS_BY_MAC(hw));
if (reg & IXGBE_FACTPS_LFS)
bus->func ^= 0x1;
+
+ /* Get MAC instance from EEPROM for configuring CS4227 */
+ if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP) {
+ hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_4, &ee_ctrl_4);
+ bus->instance_id = (ee_ctrl_4 & IXGBE_EE_CTRL_4_INST_ID) >>
+ IXGBE_EE_CTRL_4_INST_ID_SHIFT;
+ }
}
/**
hw->mac.addr[4], hw->mac.addr[5]);
hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
-
- /* clear VMDq pool/queue selection for RAR 0 */
- hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
}
+
+ /* clear VMDq pool/queue selection for RAR 0 */
+ hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
+
hw->addr_ctrl.overflow_promisc = 0;
hw->addr_ctrl.rar_used_count = 1;
}
/* Negotiate the fc mode to use */
- ixgbe_fc_autoneg(hw);
+ hw->mac.ops.fc_autoneg(hw);
/* Disable any previous flow control settings */
mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
* Find the intersection between advertised settings and link partner's
* advertised settings
**/
-STATIC s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
{
if ((!(adv_reg)) || (!(lp_reg))) {
* return the VLVF index where this VLAN id should be placed
*
**/
-s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
+s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan, bool vlvf_bypass)
{
- u32 bits = 0;
- u32 first_empty_slot = 0;
- s32 regindex;
+ s32 regindex, first_empty_slot;
+ u32 bits;
/* short cut the special case */
if (vlan == 0)
return 0;
- /*
- * Search for the vlan id in the VLVF entries. Save off the first empty
- * slot found along the way
- */
- for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+ /* if vlvf_bypass is set we don't want to use an empty slot, we
+ * will simply bypass the VLVF if there are no entries present in the
+ * VLVF that contain our VLAN
+ */
+ first_empty_slot = vlvf_bypass ? IXGBE_ERR_NO_SPACE : 0;
+
+ /* add VLAN enable bit for comparison */
+ vlan |= IXGBE_VLVF_VIEN;
+
+ /* Search for the vlan id in the VLVF entries. Save off the first empty
+ * slot found along the way.
+ *
+ * pre-decrement loop covering (IXGBE_VLVF_ENTRIES - 1) .. 1
+ */
+ for (regindex = IXGBE_VLVF_ENTRIES; --regindex;) {
bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
- if (!bits && !(first_empty_slot))
+ if (bits == vlan)
+ return regindex;
+ if (!first_empty_slot && !bits)
first_empty_slot = regindex;
- else if ((bits & 0x0FFF) == vlan)
- break;
}
- /*
- * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
- * in the VLVF. Else use the first empty VLVF register for this
- * vlan id.
- */
- if (regindex >= IXGBE_VLVF_ENTRIES) {
- if (first_empty_slot)
- regindex = first_empty_slot;
- else {
- ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
- "No space in VLVF.\n");
- regindex = IXGBE_ERR_NO_SPACE;
- }
- }
+ /* If we are here then we didn't find the VLAN. Return first empty
+ * slot we found during our search, else error.
+ */
+ if (!first_empty_slot)
+ ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "No space in VLVF.\n");
- return regindex;
+ return first_empty_slot ? first_empty_slot : IXGBE_ERR_NO_SPACE;
}
/**
* ixgbe_set_vfta_generic - Set VLAN filter table
* @hw: pointer to hardware structure
* @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN
+ * @vlvf_bypass: boolean flag indicating updating default pool is okay
*
* Turn on/off specified VLAN in the VLAN filter table.
**/
s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
+ bool vlan_on, bool vlvf_bypass)
{
- s32 regindex;
- u32 bitindex;
- u32 vfta;
- u32 targetbit;
- s32 ret_val = IXGBE_SUCCESS;
- bool vfta_changed = false;
+ u32 regidx, vfta_delta, vfta;
+ s32 ret_val;
DEBUGFUNC("ixgbe_set_vfta_generic");
- if (vlan > 4095)
+ if (vlan > 4095 || vind > 63)
return IXGBE_ERR_PARAM;
/*
* bits[11-5]: which register
* bits[4-0]: which bit in the register
*/
- regindex = (vlan >> 5) & 0x7F;
- bitindex = vlan & 0x1F;
- targetbit = (1 << bitindex);
- vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
-
- if (vlan_on) {
- if (!(vfta & targetbit)) {
- vfta |= targetbit;
- vfta_changed = true;
- }
- } else {
- if ((vfta & targetbit)) {
- vfta &= ~targetbit;
- vfta_changed = true;
- }
- }
+ regidx = vlan / 32;
+ vfta_delta = 1 << (vlan % 32);
+ vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regidx));
+
+ /* vfta_delta represents the difference between the current value
+ * of vfta and the value we want in the register. Since the diff
+ * is an XOR mask we can just update the vfta using an XOR
+ */
+ vfta_delta &= vlan_on ? ~vfta : vfta;
+ vfta ^= vfta_delta;
/* Part 2
* Call ixgbe_set_vlvf_generic to set VLVFB and VLVF
*/
- ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on,
- &vfta_changed);
- if (ret_val != IXGBE_SUCCESS)
+ ret_val = ixgbe_set_vlvf_generic(hw, vlan, vind, vlan_on, &vfta_delta,
+ vfta, vlvf_bypass);
+ if (ret_val != IXGBE_SUCCESS) {
+ if (vlvf_bypass)
+ goto vfta_update;
return ret_val;
+ }
- if (vfta_changed)
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
+vfta_update:
+ /* Update VFTA now that we are ready for traffic */
+ if (vfta_delta)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regidx), vfta);
return IXGBE_SUCCESS;
}
* ixgbe_set_vlvf_generic - Set VLAN Pool Filter
* @hw: pointer to hardware structure
* @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VFVF
- * @vfta_changed: pointer to boolean flag which indicates whether VFTA
- * should be changed
+ * @vind: VMDq output index that maps queue to VLAN id in VLVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VLVF
+ * @vfta_delta: pointer to the difference between the current value of VFTA
+ * and the desired value
+ * @vfta: the desired value of the VFTA
+ * @vlvf_bypass: boolean flag indicating updating default pool is okay
*
* Turn on/off specified bit in VLVF table.
**/
s32 ixgbe_set_vlvf_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on, bool *vfta_changed)
+ bool vlan_on, u32 *vfta_delta, u32 vfta,
+ bool vlvf_bypass)
{
- u32 vt;
+ u32 bits;
+ s32 vlvf_index;
DEBUGFUNC("ixgbe_set_vlvf_generic");
- if (vlan > 4095)
+ if (vlan > 4095 || vind > 63)
return IXGBE_ERR_PARAM;
/* If VT Mode is set
* Or !vlan_on
* clear the pool bit and possibly the vind
*/
- vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
- if (vt & IXGBE_VT_CTL_VT_ENABLE) {
- s32 vlvf_index;
- u32 bits;
-
- vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
- if (vlvf_index < 0)
- return vlvf_index;
-
- if (vlan_on) {
- /* set the pool bit */
- if (vind < 32) {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2));
- bits |= (1 << vind);
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2),
- bits);
- } else {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1));
- bits |= (1 << (vind - 32));
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1),
- bits);
- }
- } else {
- /* clear the pool bit */
- if (vind < 32) {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2));
- bits &= ~(1 << vind);
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2),
- bits);
- bits |= IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1));
- } else {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1));
- bits &= ~(1 << (vind - 32));
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB((vlvf_index * 2) + 1),
- bits);
- bits |= IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index * 2));
- }
- }
+ if (!(IXGBE_READ_REG(hw, IXGBE_VT_CTL) & IXGBE_VT_CTL_VT_ENABLE))
+ return IXGBE_SUCCESS;
+ vlvf_index = ixgbe_find_vlvf_slot(hw, vlan, vlvf_bypass);
+ if (vlvf_index < 0)
+ return vlvf_index;
- /*
- * If there are still bits set in the VLVFB registers
- * for the VLAN ID indicated we need to see if the
- * caller is requesting that we clear the VFTA entry bit.
- * If the caller has requested that we clear the VFTA
- * entry bit but there are still pools/VFs using this VLAN
- * ID entry then ignore the request. We're not worried
- * about the case where we're turning the VFTA VLAN ID
- * entry bit on, only when requested to turn it off as
- * there may be multiple pools and/or VFs using the
- * VLAN ID entry. In that case we cannot clear the
- * VFTA bit until all pools/VFs using that VLAN ID have also
- * been cleared. This will be indicated by "bits" being
- * zero.
+ bits = IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32));
+
+ /* set the pool bit */
+ bits |= 1 << (vind % 32);
+ if (vlan_on)
+ goto vlvf_update;
+
+ /* clear the pool bit */
+ bits ^= 1 << (vind % 32);
+
+ if (!bits &&
+ !IXGBE_READ_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + 1 - vind / 32))) {
+ /* Clear VFTA first, then disable VLVF. Otherwise
+ * we run the risk of stray packets leaking into
+ * the PF via the default pool
*/
- if (bits) {
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
- (IXGBE_VLVF_VIEN | vlan));
- if ((!vlan_on) && (vfta_changed != NULL)) {
- /* someone wants to clear the vfta entry
- * but some pools/VFs are still using it.
- * Ignore it. */
- *vfta_changed = false;
- }
- } else
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+ if (vfta_delta)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(vlan / 32), vfta);
+
+ /* disable VLVF and clear remaining bit from pool */
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), 0);
+
+ return IXGBE_SUCCESS;
}
+ /* If there are still bits set in the VLVFB registers
+ * for the VLAN ID indicated we need to see if the
+ * caller is requesting that we clear the VFTA entry bit.
+ * If the caller has requested that we clear the VFTA
+ * entry bit but there are still pools/VFs using this VLAN
+ * ID entry then ignore the request. We're not worried
+ * about the case where we're turning the VFTA VLAN ID
+ * entry bit on, only when requested to turn it off as
+ * there may be multiple pools and/or VFs using the
+ * VLAN ID entry. In that case we cannot clear the
+ * VFTA bit until all pools/VFs using that VLAN ID have also
+ * been cleared. This will be indicated by "bits" being
+ * zero.
+ */
+ *vfta_delta = 0;
+
+vlvf_update:
+ /* record pool change and enable VLAN ID if not already enabled */
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB(vlvf_index * 2 + vind / 32), bits);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), IXGBE_VLVF_VIEN | vlan);
return IXGBE_SUCCESS;
}
for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset * 2) + 1), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset * 2 + 1), 0);
}
return IXGBE_SUCCESS;
/**
* ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
* @hw: pointer to hardware structure
- * @enable: enable or disable switch for anti-spoofing
- * @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ * @enable: enable or disable switch for MAC anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for MAC anti-spoofing
*
**/
-void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
{
- int j;
- int pf_target_reg = pf >> 3;
- int pf_target_shift = pf % 8;
- u32 pfvfspoof = 0;
+ int vf_target_reg = vf >> 3;
+ int vf_target_shift = vf % 8;
+ u32 pfvfspoof;
if (hw->mac.type == ixgbe_mac_82598EB)
return;
+ pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
if (enable)
- pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
-
- /*
- * PFVFSPOOF register array is size 8 with 8 bits assigned to
- * MAC anti-spoof enables in each register array element.
- */
- for (j = 0; j < pf_target_reg; j++)
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
-
- /*
- * The PF should be allowed to spoof so that it can support
- * emulation mode NICs. Do not set the bits assigned to the PF
- */
- pfvfspoof &= (1 << pf_target_shift) - 1;
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
-
- /*
- * Remaining pools belong to the PF so they do not need to have
- * anti-spoofing enabled.
- */
- for (j++; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), 0);
+ pfvfspoof |= (1 << vf_target_shift);
+ else
+ pfvfspoof &= ~(1 << vf_target_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
}
/**
* So we will leave this up to the caller to read back the data
* in these cases.
*
- * Communicates with the manageability block. On success return IXGBE_SUCCESS
- * else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
+ * Communicates with the manageability block. On success return IXGBE_SUCCESS
+ * else returns semaphore error when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
**/
s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer,
u32 length, u32 timeout, bool return_data)
u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
u16 buf_len;
u16 dword_len;
+ s32 status;
DEBUGFUNC("ixgbe_host_interface_command");
DEBUGOUT1("Buffer length failure buffersize=%d.\n", length);
return IXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ /* Take management host interface semaphore */
+ status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+
+ if (status)
+ return status;
+
/* Set bit 9 of FWSTS clearing FW reset indication */
fwsts = IXGBE_READ_REG(hw, IXGBE_FWSTS);
IXGBE_WRITE_REG(hw, IXGBE_FWSTS, fwsts | IXGBE_FWSTS_FWRI);
hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
if ((hicr & IXGBE_HICR_EN) == 0) {
DEBUGOUT("IXGBE_HOST_EN bit disabled.\n");
- return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto rel_out;
}
/* Calculate length in DWORDs. We must be DWORD aligned */
if ((length % (sizeof(u32))) != 0) {
DEBUGOUT("Buffer length failure, not aligned to dword");
- return IXGBE_ERR_INVALID_ARGUMENT;
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto rel_out;
}
dword_len = length >> 2;
!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV)) {
ERROR_REPORT1(IXGBE_ERROR_CAUTION,
"Command has failed with no status valid.\n");
- return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto rel_out;
}
if (!return_data)
- return 0;
+ goto rel_out;
/* Calculate length in DWORDs */
dword_len = hdr_size >> 2;
/* If there is any thing in data position pull it in */
buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
if (buf_len == 0)
- return 0;
+ goto rel_out;
if (length < buf_len + hdr_size) {
DEBUGOUT("Buffer not large enough for reply message.\n");
- return IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ status = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto rel_out;
}
/* Calculate length in DWORDs, add 3 for odd lengths */
IXGBE_LE32_TO_CPUS(&buffer[bi]);
}
- return 0;
+rel_out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+
+ return status;
}
/**
DEBUGFUNC("ixgbe_set_fw_drv_ver_generic");
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM)
- != IXGBE_SUCCESS) {
- ret_val = IXGBE_ERR_SWFW_SYNC;
- goto out;
- }
-
fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
break;
}
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-out:
return ret_val;
}
Code Review / deb_dpdk.git / blobdiff