--- /dev/null
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+
+#include "ixgbe_api.h"
+#include "ixgbe_type.h"
+#include "ixgbe_vf.h"
+
+#ifndef IXGBE_VFWRITE_REG
+#define IXGBE_VFWRITE_REG IXGBE_WRITE_REG
+#endif
+#ifndef IXGBE_VFREAD_REG
+#define IXGBE_VFREAD_REG IXGBE_READ_REG
+#endif
+
+/**
+ * ixgbe_init_ops_vf - Initialize the pointers for vf
+ * @hw: pointer to hardware structure
+ *
+ * This will assign function pointers, adapter-specific functions can
+ * override the assignment of generic function pointers by assigning
+ * their own adapter-specific function pointers.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw)
+{
+ /* MAC */
+ hw->mac.ops.init_hw = ixgbe_init_hw_vf;
+ hw->mac.ops.reset_hw = ixgbe_reset_hw_vf;
+ hw->mac.ops.start_hw = ixgbe_start_hw_vf;
+ /* Cannot clear stats on VF */
+ hw->mac.ops.clear_hw_cntrs = NULL;
+ hw->mac.ops.get_media_type = NULL;
+ hw->mac.ops.get_mac_addr = ixgbe_get_mac_addr_vf;
+ hw->mac.ops.stop_adapter = ixgbe_stop_adapter_vf;
+ hw->mac.ops.get_bus_info = NULL;
+
+ /* Link */
+ hw->mac.ops.setup_link = ixgbe_setup_mac_link_vf;
+ hw->mac.ops.check_link = ixgbe_check_mac_link_vf;
+ hw->mac.ops.get_link_capabilities = NULL;
+
+ /* RAR, Multicast, VLAN */
+ hw->mac.ops.set_rar = ixgbe_set_rar_vf;
+ hw->mac.ops.set_uc_addr = ixgbevf_set_uc_addr_vf;
+ hw->mac.ops.init_rx_addrs = NULL;
+ hw->mac.ops.update_mc_addr_list = ixgbe_update_mc_addr_list_vf;
+ hw->mac.ops.enable_mc = NULL;
+ hw->mac.ops.disable_mc = NULL;
+ hw->mac.ops.clear_vfta = NULL;
+ hw->mac.ops.set_vfta = ixgbe_set_vfta_vf;
+
+ hw->mac.max_tx_queues = 1;
+ hw->mac.max_rx_queues = 1;
+
+ hw->mbx.ops.init_params = ixgbe_init_mbx_params_vf;
+
+ return IXGBE_SUCCESS;
+}
+
+/* ixgbe_virt_clr_reg - Set register to default (power on) state.
+ * @hw: pointer to hardware structure
+ */
+static void ixgbe_virt_clr_reg(struct ixgbe_hw *hw)
+{
+ int i;
+ u32 vfsrrctl;
+ u32 vfdca_rxctrl;
+ u32 vfdca_txctrl;
+
+ /* VRSRRCTL default values (BSIZEPACKET = 2048, BSIZEHEADER = 256) */
+ vfsrrctl = 0x100 << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ vfsrrctl |= 0x800 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+
+ /* DCA_RXCTRL default value */
+ vfdca_rxctrl = IXGBE_DCA_RXCTRL_DESC_RRO_EN |
+ IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+ IXGBE_DCA_RXCTRL_HEAD_WRO_EN;
+
+ /* DCA_TXCTRL default value */
+ vfdca_txctrl = IXGBE_DCA_TXCTRL_DESC_RRO_EN |
+ IXGBE_DCA_TXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_TXCTRL_DATA_RRO_EN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+
+ for (i = 0; i < 7; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDH(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDT(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(i), vfsrrctl);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDH(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDT(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAH(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDWBAL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFDCA_RXCTRL(i), vfdca_rxctrl);
+ IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(i), vfdca_txctrl);
+ }
+
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_start_hw_vf - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_vf(struct ixgbe_hw *hw)
+{
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_hw_vf - virtual function hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware and then starting
+ * the hardware
+ **/
+s32 ixgbe_init_hw_vf(struct ixgbe_hw *hw)
+{
+ s32 status = hw->mac.ops.start_hw(hw);
+
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_vf - Performs hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by reseting the transmit and receive units, masks and
+ * clears all interrupts.
+ **/
+s32 ixgbe_reset_hw_vf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 timeout = IXGBE_VF_INIT_TIMEOUT;
+ s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
+ u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ DEBUGFUNC("ixgbevf_reset_hw_vf");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ /* reset the api version */
+ hw->api_version = ixgbe_mbox_api_10;
+
+ DEBUGOUT("Issuing a function level reset to MAC\n");
+
+ IXGBE_VFWRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
+ IXGBE_WRITE_FLUSH(hw);
+
+ msec_delay(50);
+
+ /* we cannot reset while the RSTI / RSTD bits are asserted */
+ while (!mbx->ops.check_for_rst(hw, 0) && timeout) {
+ timeout--;
+ usec_delay(5);
+ }
+
+ if (!timeout)
+ return IXGBE_ERR_RESET_FAILED;
+
+ /* Reset VF registers to initial values */
+ ixgbe_virt_clr_reg(hw);
+
+ /* mailbox timeout can now become active */
+ mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
+
+ msgbuf[0] = IXGBE_VF_RESET;
+ mbx->ops.write_posted(hw, msgbuf, 1, 0);
+
+ msec_delay(10);
+
+ /*
+ * set our "perm_addr" based on info provided by PF
+ * also set up the mc_filter_type which is piggy backed
+ * on the mac address in word 3
+ */
+ ret_val = mbx->ops.read_posted(hw, msgbuf,
+ IXGBE_VF_PERMADDR_MSG_LEN, 0);
+ if (ret_val)
+ return ret_val;
+
+ if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK) &&
+ msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_NACK))
+ return IXGBE_ERR_INVALID_MAC_ADDR;
+
+ if (msgbuf[0] == (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
+ memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+
+ hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_stop_adapter_vf - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_vf(struct ixgbe_hw *hw)
+{
+ u32 reg_val;
+ u16 i;
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Clear interrupt mask to stop from interrupts being generated */
+ IXGBE_VFWRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
+
+ /* Clear any pending interrupts, flush previous writes */
+ IXGBE_VFREAD_REG(hw, IXGBE_VTEICR);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ for (i = 0; i < hw->mac.max_tx_queues; i++)
+ IXGBE_VFWRITE_REG(hw, IXGBE_VFTXDCTL(i), IXGBE_TXDCTL_SWFLSH);
+
+ /* Disable the receive unit by stopping each queue */
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ reg_val = IXGBE_VFREAD_REG(hw, IXGBE_VFRXDCTL(i));
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ IXGBE_VFWRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
+ }
+ /* Clear packet split and pool config */
+ IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+
+ /* flush all queues disables */
+ IXGBE_WRITE_FLUSH(hw);
+ msec_delay(2);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
+ *
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
+ **/
+STATIC s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector = 0;
+
+ switch (hw->mac.mc_filter_type) {
+ case 0: /* use bits [47:36] of the address */
+ vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ break;
+ case 1: /* use bits [46:35] of the address */
+ vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ break;
+ case 2: /* use bits [45:34] of the address */
+ vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ break;
+ case 3: /* use bits [43:32] of the address */
+ vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ break;
+ default: /* Invalid mc_filter_type */
+ DEBUGOUT("MC filter type param set incorrectly\n");
+ ASSERT(0);
+ break;
+ }
+
+ /* vector can only be 12-bits or boundary will be exceeded */
+ vector &= 0xFFF;
+ return vector;
+}
+
+STATIC void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw,
+ u32 *msg, u16 size)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 retmsg[IXGBE_VFMAILBOX_SIZE];
+ s32 retval = mbx->ops.write_posted(hw, msg, size, 0);
+
+ if (!retval)
+ mbx->ops.read_posted(hw, retmsg, size, 0);
+}
+
+/**
+ * ixgbe_set_rar_vf - set device MAC address
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
+ **/
+s32 ixgbe_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+ UNREFERENCED_3PARAMETER(vmdq, enable_addr, index);
+
+ memset(msgbuf, 0, 12);
+ msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* if nacked the address was rejected, use "perm_addr" */
+ if (!ret_val &&
+ (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
+ ixgbe_get_mac_addr_vf(hw, hw->mac.addr);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ * @next: caller supplied function to return next address in list
+ *
+ * Updates the Multicast Table Array.
+ **/
+s32 ixgbe_update_mc_addr_list_vf(struct ixgbe_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count, ixgbe_mc_addr_itr next,
+ bool clear)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+ u16 *vector_list = (u16 *)&msgbuf[1];
+ u32 vector;
+ u32 cnt, i;
+ u32 vmdq;
+
+ UNREFERENCED_1PARAMETER(clear);
+
+ DEBUGFUNC("ixgbe_update_mc_addr_list_vf");
+
+ /* Each entry in the list uses 1 16 bit word. We have 30
+ * 16 bit words available in our HW msg buffer (minus 1 for the
+ * msg type). That's 30 hash values if we pack 'em right. If
+ * there are more than 30 MC addresses to add then punt the
+ * extras for now and then add code to handle more than 30 later.
+ * It would be unusual for a server to request that many multi-cast
+ * addresses except for in large enterprise network environments.
+ */
+
+ DEBUGOUT1("MC Addr Count = %d\n", mc_addr_count);
+
+ cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
+ msgbuf[0] = IXGBE_VF_SET_MULTICAST;
+ msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
+
+ for (i = 0; i < cnt; i++) {
+ vector = ixgbe_mta_vector(hw, next(hw, &mc_addr_list, &vmdq));
+ DEBUGOUT1("Hash value = 0x%03X\n", vector);
+ vector_list[i] = (u16)vector;
+ }
+
+ return mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE, 0);
+}
+
+/**
+ * ixgbe_set_vfta_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vlan: 12 bit VLAN ID
+ * @vind: unused by VF drivers
+ * @vlan_on: if true then set bit, else clear bit
+ **/
+s32 ixgbe_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+ s32 ret_val;
+ UNREFERENCED_1PARAMETER(vind);
+
+ msgbuf[0] = IXGBE_VF_SET_VLAN;
+ msgbuf[1] = vlan;
+ /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+ msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
+
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 2, 0);
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 1, 0);
+
+ if (!ret_val && (msgbuf[0] & IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_SUCCESS;
+
+ return ret_val | (msgbuf[0] & IXGBE_VT_MSGTYPE_NACK);
+}
+
+/**
+ * ixgbe_get_num_of_tx_queues_vf - Get number of TX queues
+ * @hw: pointer to hardware structure
+ *
+ * Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues_vf(struct ixgbe_hw *hw)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ return IXGBE_VF_MAX_TX_QUEUES;
+}
+
+/**
+ * ixgbe_get_num_of_rx_queues_vf - Get number of RX queues
+ * @hw: pointer to hardware structure
+ *
+ * Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues_vf(struct ixgbe_hw *hw)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ return IXGBE_VF_MAX_RX_QUEUES;
+}
+
+/**
+ * ixgbe_get_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+s32 ixgbe_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ int i;
+
+ for (i = 0; i < IXGBE_ETH_LENGTH_OF_ADDRESS; i++)
+ mac_addr[i] = hw->mac.perm_addr[i];
+
+ return IXGBE_SUCCESS;
+}
+
+s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, sizeof(msgbuf));
+ /*
+ * If index is one then this is the start of a new list and needs
+ * indication to the PF so it can do it's own list management.
+ * If it is zero then that tells the PF to just clear all of
+ * this VF's macvlans and there is no new list.
+ */
+ msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
+ msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
+ if (addr)
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3, 0);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ if (!ret_val)
+ if (msgbuf[0] == (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
+ ret_val = IXGBE_ERR_OUT_OF_MEM;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_setup_mac_link_vf - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ UNREFERENCED_3PARAMETER(hw, speed, autoneg_wait_to_complete);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_check_mac_link_vf - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_vf(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool autoneg_wait_to_complete)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ struct ixgbe_mac_info *mac = &hw->mac;
+ s32 ret_val = IXGBE_SUCCESS;
+ u32 links_reg;
+ u32 in_msg = 0;
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
+
+ /* If we were hit with a reset drop the link */
+ if (!mbx->ops.check_for_rst(hw, 0) || !mbx->timeout)
+ mac->get_link_status = true;
+
+ if (!mac->get_link_status)
+ goto out;
+
+ /* if link status is down no point in checking to see if pf is up */
+ links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+ if (!(links_reg & IXGBE_LINKS_UP))
+ goto out;
+
+ /* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
+ * before the link status is correct
+ */
+ if (mac->type == ixgbe_mac_82599_vf) {
+ int i;
+
+ for (i = 0; i < 5; i++) {
+ usec_delay(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+ if (!(links_reg & IXGBE_LINKS_UP))
+ goto out;
+ }
+ }
+
+ switch (links_reg & IXGBE_LINKS_SPEED_82599) {
+ case IXGBE_LINKS_SPEED_10G_82599:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ break;
+ case IXGBE_LINKS_SPEED_1G_82599:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ case IXGBE_LINKS_SPEED_100_82599:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ break;
+ }
+
+ /* if the read failed it could just be a mailbox collision, best wait
+ * until we are called again and don't report an error
+ */
+ if (mbx->ops.read(hw, &in_msg, 1, 0))
+ goto out;
+
+ if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
+ /* msg is not CTS and is NACK we must have lost CTS status */
+ if (in_msg & IXGBE_VT_MSGTYPE_NACK)
+ ret_val = -1;
+ goto out;
+ }
+
+ /* the pf is talking, if we timed out in the past we reinit */
+ if (!mbx->timeout) {
+ ret_val = -1;
+ goto out;
+ }
+
+ /* if we passed all the tests above then the link is up and we no
+ * longer need to check for link
+ */
+ mac->get_link_status = false;
+
+out:
+ *link_up = !mac->get_link_status;
+ return ret_val;
+}
+
+/**
+ * ixgbevf_rlpml_set_vf - Set the maximum receive packet length
+ * @hw: pointer to the HW structure
+ * @max_size: value to assign to max frame size
+ **/
+void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
+{
+ u32 msgbuf[2];
+
+ msgbuf[0] = IXGBE_VF_SET_LPE;
+ msgbuf[1] = max_size;
+ ixgbevf_write_msg_read_ack(hw, msgbuf, 2);
+}
+
+/**
+ * ixgbevf_negotiate_api_version - Negotiate supported API version
+ * @hw: pointer to the HW structure
+ * @api: integer containing requested API version
+ **/
+int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api)
+{
+ int err;
+ u32 msg[3];
+
+ /* Negotiate the mailbox API version */
+ msg[0] = IXGBE_VF_API_NEGOTIATE;
+ msg[1] = api;
+ msg[2] = 0;
+ err = hw->mbx.ops.write_posted(hw, msg, 3, 0);
+
+ if (!err)
+ err = hw->mbx.ops.read_posted(hw, msg, 3, 0);
+
+ if (!err) {
+ msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* Store value and return 0 on success */
+ if (msg[0] == (IXGBE_VF_API_NEGOTIATE | IXGBE_VT_MSGTYPE_ACK)) {
+ hw->api_version = api;
+ return 0;
+ }
+
+ err = IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ return err;
+}
+
+int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
+ unsigned int *default_tc)
+{
+ int err;
+ u32 msg[5];
+
+ /* do nothing if API doesn't support ixgbevf_get_queues */
+ switch (hw->api_version) {
+ case ixgbe_mbox_api_11:
+ case ixgbe_mbox_api_12:
+ break;
+ default:
+ return 0;
+ }
+
+ /* Fetch queue configuration from the PF */
+ msg[0] = IXGBE_VF_GET_QUEUES;
+ msg[1] = msg[2] = msg[3] = msg[4] = 0;
+ err = hw->mbx.ops.write_posted(hw, msg, 5, 0);
+
+ if (!err)
+ err = hw->mbx.ops.read_posted(hw, msg, 5, 0);
+
+ if (!err) {
+ msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /*
+ * if we we didn't get an ACK there must have been
+ * some sort of mailbox error so we should treat it
+ * as such
+ */
+ if (msg[0] != (IXGBE_VF_GET_QUEUES | IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_ERR_MBX;
+
+ /* record and validate values from message */
+ hw->mac.max_tx_queues = msg[IXGBE_VF_TX_QUEUES];
+ if (hw->mac.max_tx_queues == 0 ||
+ hw->mac.max_tx_queues > IXGBE_VF_MAX_TX_QUEUES)
+ hw->mac.max_tx_queues = IXGBE_VF_MAX_TX_QUEUES;
+
+ hw->mac.max_rx_queues = msg[IXGBE_VF_RX_QUEUES];
+ if (hw->mac.max_rx_queues == 0 ||
+ hw->mac.max_rx_queues > IXGBE_VF_MAX_RX_QUEUES)
+ hw->mac.max_rx_queues = IXGBE_VF_MAX_RX_QUEUES;
+
+ *num_tcs = msg[IXGBE_VF_TRANS_VLAN];
+ /* in case of unknown state assume we cannot tag frames */
+ if (*num_tcs > hw->mac.max_rx_queues)
+ *num_tcs = 1;
+
+ *default_tc = msg[IXGBE_VF_DEF_QUEUE];
+ /* default to queue 0 on out-of-bounds queue number */
+ if (*default_tc >= hw->mac.max_tx_queues)
+ *default_tc = 0;
+ }
+
+ return err;
+}
Code Review / deb_dpdk.git / blobdiff