--- /dev/null
+/*******************************************************************************
+
+Copyright (c) 2001-2015, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+
+#include "ixgbe_x540.h"
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_X540_MAX_TX_QUEUES 128
+#define IXGBE_X540_MAX_RX_QUEUES 128
+#define IXGBE_X540_RAR_ENTRIES 128
+#define IXGBE_X540_MC_TBL_SIZE 128
+#define IXGBE_X540_VFT_TBL_SIZE 128
+#define IXGBE_X540_RX_PB_SIZE 384
+
+STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
+STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
+STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
+
+/**
+ * ixgbe_init_ops_X540 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for X540.
+ * Does not touch the hardware.
+ **/
+s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val;
+
+ DEBUGFUNC("ixgbe_init_ops_X540");
+
+ ret_val = ixgbe_init_phy_ops_generic(hw);
+ ret_val = ixgbe_init_ops_generic(hw);
+
+
+ /* EEPROM */
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
+ eeprom->ops.read = ixgbe_read_eerd_X540;
+ eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_X540;
+ eeprom->ops.write = ixgbe_write_eewr_X540;
+ eeprom->ops.write_buffer = ixgbe_write_eewr_buffer_X540;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X540;
+ eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X540;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X540;
+
+ /* PHY */
+ phy->ops.init = ixgbe_init_phy_ops_generic;
+ phy->ops.reset = NULL;
+ phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
+
+ /* MAC */
+ mac->ops.reset_hw = ixgbe_reset_hw_X540;
+ mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
+ mac->ops.get_media_type = ixgbe_get_media_type_X540;
+ mac->ops.get_supported_physical_layer =
+ ixgbe_get_supported_physical_layer_X540;
+ mac->ops.read_analog_reg8 = NULL;
+ mac->ops.write_analog_reg8 = NULL;
+ mac->ops.start_hw = ixgbe_start_hw_X540;
+ mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
+ mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
+ mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
+ mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
+ mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
+ mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X540;
+ mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X540;
+ mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
+ mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
+
+ /* RAR, Multicast, VLAN */
+ mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
+ mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
+ mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
+ mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
+ mac->rar_highwater = 1;
+ mac->ops.set_vfta = ixgbe_set_vfta_generic;
+ mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
+ mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
+ mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
+ mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
+ mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
+
+ /* Link */
+ mac->ops.get_link_capabilities =
+ ixgbe_get_copper_link_capabilities_generic;
+ mac->ops.setup_link = ixgbe_setup_mac_link_X540;
+ mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
+ mac->ops.check_link = ixgbe_check_mac_link_generic;
+
+
+ mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
+ mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE;
+ mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+ /*
+ * FWSM register
+ * ARC supported; valid only if manageability features are
+ * enabled.
+ */
+ mac->arc_subsystem_valid = !!(IXGBE_READ_REG(hw, IXGBE_FWSM_BY_MAC(hw))
+ & IXGBE_FWSM_MODE_MASK);
+
+ hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
+
+ /* LEDs */
+ mac->ops.blink_led_start = ixgbe_blink_led_start_X540;
+ mac->ops.blink_led_stop = ixgbe_blink_led_stop_X540;
+
+ /* Manageability interface */
+ mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
+
+ mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_X540 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_capabilities_X540(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ ixgbe_get_copper_link_capabilities_generic(hw, speed, autoneg);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_media_type_X540 - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+{
+ UNREFERENCED_1PARAMETER(hw);
+ return ixgbe_media_type_copper;
+}
+
+/**
+ * ixgbe_setup_mac_link_X540 - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ **/
+s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg_wait_to_complete)
+{
+ DEBUGFUNC("ixgbe_setup_mac_link_X540");
+ return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete);
+}
+
+/**
+ * ixgbe_reset_hw_X540 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, and perform a reset.
+ **/
+s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 ctrl, i;
+
+ DEBUGFUNC("ixgbe_reset_hw_X540");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
+mac_reset_top:
+ ctrl = IXGBE_CTRL_RST;
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
+ break;
+ }
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
+ status = IXGBE_ERR_RESET_FAILED;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Reset polling failed to complete.\n");
+ }
+ msec_delay(100);
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ /* Set the Rx packet buffer size. */
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ /* Store the permanent SAN mac address */
+ hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+ /* Add the SAN MAC address to the RAR only if it's a valid address */
+ if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+ hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+ hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+ /* Save the SAN MAC RAR index */
+ hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
+
+ /* Reserve the last RAR for the SAN MAC address */
+ hw->mac.num_rar_entries--;
+ }
+
+ /* Store the alternative WWNN/WWPN prefix */
+ hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+ &hw->mac.wwpn_prefix);
+
+reset_hw_out:
+ return status;
+}
+
+/**
+ * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_start_hw_X540");
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ ret_val = ixgbe_start_hw_gen2(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u16 ext_ability = 0;
+
+ DEBUGFUNC("ixgbe_get_supported_physical_layer_X540");
+
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY,
+ IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability);
+ if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ DEBUGFUNC("ixgbe_init_eeprom_params_X540");
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->semaphore_delay = 10;
+ eeprom->type = ixgbe_flash;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+ DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_read_eerd_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_read_eerd_generic(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_buffer_X540- Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_read_eerd_buffer_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_read_eerd_buffer_generic(hw, offset,
+ words, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_write_eewr_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_write_eewr_generic(hw, offset, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_write_eewr_buffer_X540");
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ IXGBE_SUCCESS) {
+ status = ixgbe_write_eewr_buffer_generic(hw, offset,
+ words, data);
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ *
+ * This function does not use synchronization for EERD and EEWR. It can
+ * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ *
+ * @hw: pointer to hardware structure
+ *
+ * Returns a negative error code on error, or the 16-bit checksum
+ **/
+s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+ u16 i, j;
+ u16 checksum = 0;
+ u16 length = 0;
+ u16 pointer = 0;
+ u16 word = 0;
+ u16 checksum_last_word = IXGBE_EEPROM_CHECKSUM;
+ u16 ptr_start = IXGBE_PCIE_ANALOG_PTR;
+
+ /* Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores here. Instead use
+ * ixgbe_read_eerd_generic
+ */
+
+ DEBUGFUNC("ixgbe_calc_eeprom_checksum_X540");
+
+ /* Include 0x0-0x3F in the checksum */
+ for (i = 0; i <= checksum_last_word; i++) {
+ if (ixgbe_read_eerd_generic(hw, i, &word)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+ if (i != IXGBE_EEPROM_CHECKSUM)
+ checksum += word;
+ }
+
+ /* Include all data from pointers 0x3, 0x6-0xE. This excludes the
+ * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+ */
+ for (i = ptr_start; i < IXGBE_FW_PTR; i++) {
+ if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+ continue;
+
+ if (ixgbe_read_eerd_generic(hw, i, &pointer)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+
+ /* Skip pointer section if the pointer is invalid. */
+ if (pointer == 0xFFFF || pointer == 0 ||
+ pointer >= hw->eeprom.word_size)
+ continue;
+
+ if (ixgbe_read_eerd_generic(hw, pointer, &length)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+
+ /* Skip pointer section if length is invalid. */
+ if (length == 0xFFFF || length == 0 ||
+ (pointer + length) >= hw->eeprom.word_size)
+ continue;
+
+ for (j = pointer + 1; j <= pointer + length; j++) {
+ if (ixgbe_read_eerd_generic(hw, j, &word)) {
+ DEBUGOUT("EEPROM read failed\n");
+ return IXGBE_ERR_EEPROM;
+ }
+ checksum += word;
+ }
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return (s32)checksum;
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
+ u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ DEBUGFUNC("ixgbe_validate_eeprom_checksum_X540");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ goto out;
+
+ checksum = (u16)(status & 0xffff);
+
+ /* Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores twice here.
+ */
+ status = ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
+ &read_checksum);
+ if (status)
+ goto out;
+
+ /* Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum) {
+ ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+ "Invalid EEPROM checksum");
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+ }
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum;
+
+ DEBUGFUNC("ixgbe_update_eeprom_checksum_X540");
+
+ /* Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+ if (status) {
+ DEBUGOUT("EEPROM read failed\n");
+ return status;
+ }
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ status = hw->eeprom.ops.calc_checksum(hw);
+ if (status < 0)
+ goto out;
+
+ checksum = (u16)(status & 0xffff);
+
+ /* Do not use hw->eeprom.ops.write because we do not want to
+ * take the synchronization semaphores twice here.
+ */
+ status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, checksum);
+ if (status)
+ goto out;
+
+ status = ixgbe_update_flash_X540(hw);
+
+out:
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ return status;
+}
+
+/**
+ * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ * EEPROM from shadow RAM to the flash device.
+ **/
+s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
+{
+ u32 flup;
+ s32 status;
+
+ DEBUGFUNC("ixgbe_update_flash_X540");
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == IXGBE_ERR_EEPROM) {
+ DEBUGOUT("Flash update time out\n");
+ goto out;
+ }
+
+ flup = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw)) | IXGBE_EEC_FLUP;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), flup);
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == IXGBE_SUCCESS)
+ DEBUGOUT("Flash update complete\n");
+ else
+ DEBUGOUT("Flash update time out\n");
+
+ if (hw->mac.type == ixgbe_mac_X540 && hw->revision_id == 0) {
+ flup = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+
+ if (flup & IXGBE_EEC_SEC1VAL) {
+ flup |= IXGBE_EEC_FLUP;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC_BY_MAC(hw), flup);
+ }
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == IXGBE_SUCCESS)
+ DEBUGOUT("Flash update complete\n");
+ else
+ DEBUGOUT("Flash update time out\n");
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ * @hw: pointer to hardware structure
+ *
+ * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ * flash update is done.
+ **/
+STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 reg;
+ s32 status = IXGBE_ERR_EEPROM;
+
+ DEBUGFUNC("ixgbe_poll_flash_update_done_X540");
+
+ for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_EEC_BY_MAC(hw));
+ if (reg & IXGBE_EEC_FLUDONE) {
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ msec_delay(5);
+ }
+
+ if (i == IXGBE_FLUDONE_ATTEMPTS)
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Flash update status polling timed out");
+
+ return status;
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ * the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 swmask = mask & IXGBE_GSSR_NVM_PHY_MASK;
+ u32 fwmask = swmask << 5;
+ u32 swi2c_mask = mask & IXGBE_GSSR_I2C_MASK;
+ u32 timeout = 200;
+ u32 hwmask = 0;
+ u32 swfw_sync;
+ u32 i;
+
+ DEBUGFUNC("ixgbe_acquire_swfw_sync_X540");
+
+ if (swmask & IXGBE_GSSR_EEP_SM)
+ hwmask |= IXGBE_GSSR_FLASH_SM;
+
+ /* SW only mask doesn't have FW bit pair */
+ if (mask & IXGBE_GSSR_SW_MNG_SM)
+ swmask |= IXGBE_GSSR_SW_MNG_SM;
+
+ swmask |= swi2c_mask;
+ fwmask |= swi2c_mask << 2;
+ for (i = 0; i < timeout; i++) {
+ /* SW NVM semaphore bit is used for access to all
+ * SW_FW_SYNC bits (not just NVM)
+ */
+ if (ixgbe_get_swfw_sync_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+ if (!(swfw_sync & (fwmask | swmask | hwmask))) {
+ swfw_sync |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw),
+ swfw_sync);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+ return IXGBE_SUCCESS;
+ }
+ /* Firmware currently using resource (fwmask), hardware
+ * currently using resource (hwmask), or other software
+ * thread currently using resource (swmask)
+ */
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+ }
+
+ /* Failed to get SW only semaphore */
+ if (swmask == IXGBE_GSSR_SW_MNG_SM) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Failed to get SW only semaphore");
+ return IXGBE_ERR_SWFW_SYNC;
+ }
+
+ /* If the resource is not released by the FW/HW the SW can assume that
+ * the FW/HW malfunctions. In that case the SW should set the SW bit(s)
+ * of the requested resource(s) while ignoring the corresponding FW/HW
+ * bits in the SW_FW_SYNC register.
+ */
+ if (ixgbe_get_swfw_sync_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+ if (swfw_sync & (fwmask | hwmask)) {
+ swfw_sync |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swfw_sync);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+ return IXGBE_SUCCESS;
+ }
+ /* If the resource is not released by other SW the SW can assume that
+ * the other SW malfunctions. In that case the SW should clear all SW
+ * flags that it does not own and then repeat the whole process once
+ * again.
+ */
+ if (swfw_sync & swmask) {
+ u32 rmask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_PHY0_SM |
+ IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_MAC_CSR_SM;
+
+ if (swi2c_mask)
+ rmask |= IXGBE_GSSR_I2C_MASK;
+ ixgbe_release_swfw_sync_X540(hw, rmask);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ return IXGBE_ERR_SWFW_SYNC;
+ }
+ ixgbe_release_swfw_sync_semaphore(hw);
+
+ return IXGBE_ERR_SWFW_SYNC;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through the SW_FW_SYNC register
+ * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ **/
+void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 swmask = mask & (IXGBE_GSSR_NVM_PHY_MASK | IXGBE_GSSR_SW_MNG_SM);
+ u32 swfw_sync;
+
+ DEBUGFUNC("ixgbe_release_swfw_sync_X540");
+
+ if (mask & IXGBE_GSSR_I2C_MASK)
+ swmask |= mask & IXGBE_GSSR_I2C_MASK;
+ ixgbe_get_swfw_sync_semaphore(hw);
+
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+ swfw_sync &= ~swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swfw_sync);
+
+ ixgbe_release_swfw_sync_semaphore(hw);
+ msec_delay(5);
+}
+
+/**
+ * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so SW/FW can gain control of shared resources
+ **/
+STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM;
+ u32 timeout = 2000;
+ u32 i;
+ u32 swsm;
+
+ DEBUGFUNC("ixgbe_get_swfw_sync_semaphore");
+
+ /* Get SMBI software semaphore between device drivers first */
+ for (i = 0; i < timeout; i++) {
+ /*
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+ if (!(swsm & IXGBE_SWSM_SMBI)) {
+ status = IXGBE_SUCCESS;
+ break;
+ }
+ usec_delay(50);
+ }
+
+ /* Now get the semaphore between SW/FW through the REGSMP bit */
+ if (status == IXGBE_SUCCESS) {
+ for (i = 0; i < timeout; i++) {
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+ if (!(swsm & IXGBE_SWFW_REGSMP))
+ break;
+
+ usec_delay(50);
+ }
+
+ /*
+ * Release semaphores and return error if SW NVM semaphore
+ * was not granted because we don't have access to the EEPROM
+ */
+ if (i >= timeout) {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "REGSMP Software NVM semaphore not granted.\n");
+ ixgbe_release_swfw_sync_semaphore(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ } else {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Software semaphore SMBI between device drivers "
+ "not granted.\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_release_swfw_sync_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+STATIC void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+ u32 swsm;
+
+ DEBUGFUNC("ixgbe_release_swfw_sync_semaphore");
+
+ /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw));
+ swsm &= ~IXGBE_SWFW_REGSMP;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC_BY_MAC(hw), swsm);
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM_BY_MAC(hw));
+ swsm &= ~IXGBE_SWSM_SMBI;
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM_BY_MAC(hw), swsm);
+
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+ ixgbe_link_speed speed;
+ bool link_up;
+
+ DEBUGFUNC("ixgbe_blink_led_start_X540");
+
+ /*
+ * Link should be up in order for the blink bit in the LED control
+ * register to work. Force link and speed in the MAC if link is down.
+ * This will be reversed when we stop the blinking.
+ */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ if (link_up == false) {
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+ }
+ /* Set the LED to LINK_UP + BLINK. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+
+ DEBUGFUNC("ixgbe_blink_led_stop_X540");
+
+ /* Restore the LED to its default value. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ ledctl_reg &= ~IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+ /* Unforce link and speed in the MAC. */
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return IXGBE_SUCCESS;
+}
Code Review / deb_dpdk.git / blobdiff