New upstream version 17.11-rc3

[deb_dpdk.git] / drivers / net / ixgbe / rte_pmd_ixgbe.h

diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h
index d33c285..81b18f8 100644 (file)
--- a/drivers/net/ixgbe/rte_pmd_ixgbe.h
+++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h
@@ -53,7 +53,7 @@
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if *vf* invalid.
  */
-int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf);
+int rte_pmd_ixgbe_ping_vf(uint16_t port, uint16_t vf);
 
 /**
  * Set the VF MAC address.
@@ -69,7 +69,7 @@ int rte_pmd_ixgbe_ping_vf(uint8_t port, uint16_t vf);
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if *vf* or *mac_addr* is invalid.
  */
-int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
+int rte_pmd_ixgbe_set_vf_mac_addr(uint16_t port, uint16_t vf,
                struct ether_addr *mac_addr);
 
 /**
@@ -87,7 +87,8 @@ int rte_pmd_ixgbe_set_vf_mac_addr(uint8_t port, uint16_t vf,
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint16_t port, uint16_t vf,
+                                        uint8_t on);
 
 /**
  * Enable/Disable VF MAC anti spoofing.
@@ -104,7 +105,7 @@ int rte_pmd_ixgbe_set_vf_vlan_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint16_t port, uint16_t vf, uint8_t on);
 
 /**
  * Enable/Disable vf vlan insert
@@ -122,7 +123,7 @@ int rte_pmd_ixgbe_set_vf_mac_anti_spoof(uint8_t port, uint16_t vf, uint8_t on);
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf,
+int rte_pmd_ixgbe_set_vf_vlan_insert(uint16_t port, uint16_t vf,
                uint16_t vlan_id);
 
 /**
@@ -139,7 +140,7 @@ int rte_pmd_ixgbe_set_vf_vlan_insert(uint8_t port, uint16_t vf,
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_tx_loopback(uint16_t port, uint8_t on);
 
 /**
  * set all queues drop enable bit
@@ -155,7 +156,7 @@ int rte_pmd_ixgbe_set_tx_loopback(uint8_t port, uint8_t on);
  *   - (-ENODEV) if *port* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
+int rte_pmd_ixgbe_set_all_queues_drop_en(uint16_t port, uint8_t on);
 
 /**
  * set drop enable bit in the VF split rx control register
@@ -174,7 +175,7 @@ int rte_pmd_ixgbe_set_all_queues_drop_en(uint8_t port, uint8_t on);
  *   - (-EINVAL) if bad parameter.
  */
 
-int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
+int rte_pmd_ixgbe_set_vf_split_drop_en(uint16_t port, uint16_t vf, uint8_t on);
 
 /**
  * Enable/Disable vf vlan strip for all queues in a pool
@@ -194,7 +195,7 @@ int rte_pmd_ixgbe_set_vf_split_drop_en(uint8_t port, uint16_t vf, uint8_t on);
  *   - (-EINVAL) if bad parameter.
  */
 int
-rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_vlan_stripq(uint16_t port, uint16_t vf, uint8_t on);
 
 /**
  * Enable MACsec offload.
@@ -212,7 +213,7 @@ rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on);
  *   - (-ENODEV) if *port* invalid.
  *   - (-ENOTSUP) if hardware doesn't support this feature.
  */
-int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp);
+int rte_pmd_ixgbe_macsec_enable(uint16_t port, uint8_t en, uint8_t rp);
 
 /**
  * Disable MACsec offload.
@@ -224,7 +225,7 @@ int rte_pmd_ixgbe_macsec_enable(uint8_t port, uint8_t en, uint8_t rp);
  *   - (-ENODEV) if *port* invalid.
  *   - (-ENOTSUP) if hardware doesn't support this feature.
  */
-int rte_pmd_ixgbe_macsec_disable(uint8_t port);
+int rte_pmd_ixgbe_macsec_disable(uint16_t port);
 
 /**
  * Configure Tx SC (Secure Connection).
@@ -238,7 +239,7 @@ int rte_pmd_ixgbe_macsec_disable(uint8_t port);
  *   - (-ENODEV) if *port* invalid.
  *   - (-ENOTSUP) if hardware doesn't support this feature.
  */
-int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac);
+int rte_pmd_ixgbe_macsec_config_txsc(uint16_t port, uint8_t *mac);
 
 /**
  * Configure Rx SC (Secure Connection).
@@ -254,7 +255,7 @@ int rte_pmd_ixgbe_macsec_config_txsc(uint8_t port, uint8_t *mac);
  *   - (-ENODEV) if *port* invalid.
  *   - (-ENOTSUP) if hardware doesn't support this feature.
  */
-int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi);
+int rte_pmd_ixgbe_macsec_config_rxsc(uint16_t port, uint8_t *mac, uint16_t pi);
 
 /**
  * Enable Tx SA (Secure Association).
@@ -275,7 +276,7 @@ int rte_pmd_ixgbe_macsec_config_rxsc(uint8_t port, uint8_t *mac, uint16_t pi);
  *   - (-ENOTSUP) if hardware doesn't support this feature.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an,
+int rte_pmd_ixgbe_macsec_select_txsa(uint16_t port, uint8_t idx, uint8_t an,
                uint32_t pn, uint8_t *key);
 
 /**
@@ -297,7 +298,7 @@ int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an,
  *   - (-ENOTSUP) if hardware doesn't support this feature.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an,
+int rte_pmd_ixgbe_macsec_select_rxsa(uint16_t port, uint8_t idx, uint8_t an,
                uint32_t pn, uint8_t *key);
 
 /**
@@ -323,7 +324,8 @@ int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an,
 *   - (-EINVAL) if bad parameter.
 */
 int
-rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on);
+rte_pmd_ixgbe_set_vf_rxmode(uint16_t port, uint16_t vf, uint16_t rx_mask,
+                            uint8_t on);
 
 /**
 * Enable or disable a VF traffic receive of an Ethernet device.
@@ -342,7 +344,7 @@ rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t
 *   - (-EINVAL) if bad parameter.
 */
 int
-rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_rx(uint16_t port, uint16_t vf, uint8_t on);
 
 /**
 * Enable or disable a VF traffic transmit of the Ethernet device.
@@ -361,7 +363,7 @@ rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on);
 *   - (-EINVAL) if bad parameter.
 */
 int
-rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on);
+rte_pmd_ixgbe_set_vf_tx(uint16_t port, uint16_t vf, uint8_t on);
 
 /**
 * Enable/Disable hardware VF VLAN filtering by an Ethernet device of
@@ -383,7 +385,8 @@ rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on);
 *   - (-EINVAL) if bad parameter.
 */
 int
-rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on);
+rte_pmd_ixgbe_set_vf_vlan_filter(uint16_t port, uint16_t vlan,
+                                uint64_t vf_mask, uint8_t vlan_on);
 
 /**
  * Set the rate limitation for a vf on an Ethernet device.
@@ -402,7 +405,8 @@ rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask,
  *   - (-ENODEV) if *port_id* invalid.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk);
+int rte_pmd_ixgbe_set_vf_rate_limit(uint16_t port, uint16_t vf,
+                                    uint16_t tx_rate, uint64_t q_msk);
 
 /**
  * Set all the TCs' bandwidth weight.
@@ -423,7 +427,7 @@ int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate,
  *   - (-EINVAL) if bad parameter.
  *   - (-ENOTSUP) not supported by firmware.
  */
-int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
+int rte_pmd_ixgbe_set_tc_bw_alloc(uint16_t port,
                                  uint8_t tc_num,
                                  uint8_t *bw_weight);
 
@@ -439,7 +443,7 @@ int rte_pmd_ixgbe_set_tc_bw_alloc(uint8_t port,
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_init(uint8_t port);
+int rte_pmd_ixgbe_bypass_init(uint16_t port);
 
 /**
  * Return bypass state.
@@ -456,7 +460,7 @@ int rte_pmd_ixgbe_bypass_init(uint8_t port);
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state);
+int rte_pmd_ixgbe_bypass_state_show(uint16_t port, uint32_t *state);
 
 /**
  * Set bypass state
@@ -473,7 +477,7 @@ int rte_pmd_ixgbe_bypass_state_show(uint8_t port, uint32_t *state);
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state);
+int rte_pmd_ixgbe_bypass_state_set(uint16_t port, uint32_t *new_state);
 
 /**
  * Return bypass state when given event occurs.
@@ -497,7 +501,7 @@ int rte_pmd_ixgbe_bypass_state_set(uint8_t port, uint32_t *new_state);
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_event_show(uint8_t port,
+int rte_pmd_ixgbe_bypass_event_show(uint16_t port,
                                    uint32_t event,
                                    uint32_t *state);
 
@@ -523,7 +527,7 @@ int rte_pmd_ixgbe_bypass_event_show(uint8_t port,
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_event_store(uint8_t port,
+int rte_pmd_ixgbe_bypass_event_store(uint16_t port,
                                     uint32_t event,
                                     uint32_t state);
 
@@ -547,7 +551,7 @@ int rte_pmd_ixgbe_bypass_event_store(uint8_t port,
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout);
+int rte_pmd_ixgbe_bypass_wd_timeout_store(uint16_t port, uint32_t timeout);
 
 /**
  * Get bypass firmware version.
@@ -561,7 +565,7 @@ int rte_pmd_ixgbe_bypass_wd_timeout_store(uint8_t port, uint32_t timeout);
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver);
+int rte_pmd_ixgbe_bypass_ver_show(uint16_t port, uint32_t *ver);
 
 /**
  * Return bypass watchdog timeout in seconds
@@ -583,7 +587,7 @@ int rte_pmd_ixgbe_bypass_ver_show(uint8_t port, uint32_t *ver);
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
+int rte_pmd_ixgbe_bypass_wd_timeout_show(uint16_t port, uint32_t *wd_timeout);
 
 /**
  * Reset bypass watchdog timer
@@ -595,7 +599,7 @@ int rte_pmd_ixgbe_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
  *   - (-ENOTSUP) if hardware doesn't support.
  *   - (-EINVAL) if bad parameter.
  */
-int rte_pmd_ixgbe_bypass_wd_reset(uint8_t port);
+int rte_pmd_ixgbe_bypass_wd_reset(uint16_t port);
 
 
 /**