Imported Upstream version 16.04
[deb_dpdk.git] / drivers / net / mlx5 / mlx5.c
diff --git a/drivers/net/mlx5/mlx5.c b/drivers/net/mlx5/mlx5.c
new file mode 100644 (file)
index 0000000..041cfc3
--- /dev/null
@@ -0,0 +1,675 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright 2015 6WIND S.A.
+ *   Copyright 2015 Mellanox.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of 6WIND S.A. nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stddef.h>
+#include <unistd.h>
+#include <string.h>
+#include <assert.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <net/if.h>
+
+/* Verbs header. */
+/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+#include <infiniband/verbs.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+/* DPDK headers don't like -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+#include <rte_malloc.h>
+#include <rte_ethdev.h>
+#include <rte_pci.h>
+#include <rte_common.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+#include "mlx5.h"
+#include "mlx5_utils.h"
+#include "mlx5_rxtx.h"
+#include "mlx5_autoconf.h"
+#include "mlx5_defs.h"
+
+/**
+ * Retrieve integer value from environment variable.
+ *
+ * @param[in] name
+ *   Environment variable name.
+ *
+ * @return
+ *   Integer value, 0 if the variable is not set.
+ */
+int
+mlx5_getenv_int(const char *name)
+{
+       const char *val = getenv(name);
+
+       if (val == NULL)
+               return 0;
+       return atoi(val);
+}
+
+/**
+ * DPDK callback to close the device.
+ *
+ * Destroy all queues and objects, free memory.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ */
+static void
+mlx5_dev_close(struct rte_eth_dev *dev)
+{
+       struct priv *priv = mlx5_get_priv(dev);
+       void *tmp;
+       unsigned int i;
+
+       priv_lock(priv);
+       DEBUG("%p: closing device \"%s\"",
+             (void *)dev,
+             ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
+       /* In case mlx5_dev_stop() has not been called. */
+       priv_dev_interrupt_handler_uninstall(priv, dev);
+       priv_special_flow_disable_all(priv);
+       priv_mac_addrs_disable(priv);
+       priv_destroy_hash_rxqs(priv);
+
+       /* Remove flow director elements. */
+       priv_fdir_disable(priv);
+       priv_fdir_delete_filters_list(priv);
+
+       /* Prevent crashes when queues are still in use. */
+       dev->rx_pkt_burst = removed_rx_burst;
+       dev->tx_pkt_burst = removed_tx_burst;
+       if (priv->rxqs != NULL) {
+               /* XXX race condition if mlx5_rx_burst() is still running. */
+               usleep(1000);
+               for (i = 0; (i != priv->rxqs_n); ++i) {
+                       tmp = (*priv->rxqs)[i];
+                       if (tmp == NULL)
+                               continue;
+                       (*priv->rxqs)[i] = NULL;
+                       rxq_cleanup(tmp);
+                       rte_free(tmp);
+               }
+               priv->rxqs_n = 0;
+               priv->rxqs = NULL;
+       }
+       if (priv->txqs != NULL) {
+               /* XXX race condition if mlx5_tx_burst() is still running. */
+               usleep(1000);
+               for (i = 0; (i != priv->txqs_n); ++i) {
+                       tmp = (*priv->txqs)[i];
+                       if (tmp == NULL)
+                               continue;
+                       (*priv->txqs)[i] = NULL;
+                       txq_cleanup(tmp);
+                       rte_free(tmp);
+               }
+               priv->txqs_n = 0;
+               priv->txqs = NULL;
+       }
+       if (priv->pd != NULL) {
+               assert(priv->ctx != NULL);
+               claim_zero(ibv_dealloc_pd(priv->pd));
+               claim_zero(ibv_close_device(priv->ctx));
+       } else
+               assert(priv->ctx == NULL);
+       if (priv->rss_conf != NULL) {
+               for (i = 0; (i != hash_rxq_init_n); ++i)
+                       rte_free((*priv->rss_conf)[i]);
+               rte_free(priv->rss_conf);
+       }
+       if (priv->reta_idx != NULL)
+               rte_free(priv->reta_idx);
+       priv_unlock(priv);
+       memset(priv, 0, sizeof(*priv));
+}
+
+static const struct eth_dev_ops mlx5_dev_ops = {
+       .dev_configure = mlx5_dev_configure,
+       .dev_start = mlx5_dev_start,
+       .dev_stop = mlx5_dev_stop,
+       .dev_set_link_down = mlx5_set_link_down,
+       .dev_set_link_up = mlx5_set_link_up,
+       .dev_close = mlx5_dev_close,
+       .promiscuous_enable = mlx5_promiscuous_enable,
+       .promiscuous_disable = mlx5_promiscuous_disable,
+       .allmulticast_enable = mlx5_allmulticast_enable,
+       .allmulticast_disable = mlx5_allmulticast_disable,
+       .link_update = mlx5_link_update,
+       .stats_get = mlx5_stats_get,
+       .stats_reset = mlx5_stats_reset,
+       .dev_infos_get = mlx5_dev_infos_get,
+       .dev_supported_ptypes_get = mlx5_dev_supported_ptypes_get,
+       .vlan_filter_set = mlx5_vlan_filter_set,
+       .rx_queue_setup = mlx5_rx_queue_setup,
+       .tx_queue_setup = mlx5_tx_queue_setup,
+       .rx_queue_release = mlx5_rx_queue_release,
+       .tx_queue_release = mlx5_tx_queue_release,
+       .flow_ctrl_get = mlx5_dev_get_flow_ctrl,
+       .flow_ctrl_set = mlx5_dev_set_flow_ctrl,
+       .mac_addr_remove = mlx5_mac_addr_remove,
+       .mac_addr_add = mlx5_mac_addr_add,
+       .mac_addr_set = mlx5_mac_addr_set,
+       .mtu_set = mlx5_dev_set_mtu,
+#ifdef HAVE_EXP_DEVICE_ATTR_VLAN_OFFLOADS
+       .vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
+       .vlan_offload_set = mlx5_vlan_offload_set,
+#endif /* HAVE_EXP_DEVICE_ATTR_VLAN_OFFLOADS */
+       .reta_update = mlx5_dev_rss_reta_update,
+       .reta_query = mlx5_dev_rss_reta_query,
+       .rss_hash_update = mlx5_rss_hash_update,
+       .rss_hash_conf_get = mlx5_rss_hash_conf_get,
+#ifdef MLX5_FDIR_SUPPORT
+       .filter_ctrl = mlx5_dev_filter_ctrl,
+#endif /* MLX5_FDIR_SUPPORT */
+};
+
+static struct {
+       struct rte_pci_addr pci_addr; /* associated PCI address */
+       uint32_t ports; /* physical ports bitfield. */
+} mlx5_dev[32];
+
+/**
+ * Get device index in mlx5_dev[] from PCI bus address.
+ *
+ * @param[in] pci_addr
+ *   PCI bus address to look for.
+ *
+ * @return
+ *   mlx5_dev[] index on success, -1 on failure.
+ */
+static int
+mlx5_dev_idx(struct rte_pci_addr *pci_addr)
+{
+       unsigned int i;
+       int ret = -1;
+
+       assert(pci_addr != NULL);
+       for (i = 0; (i != RTE_DIM(mlx5_dev)); ++i) {
+               if ((mlx5_dev[i].pci_addr.domain == pci_addr->domain) &&
+                   (mlx5_dev[i].pci_addr.bus == pci_addr->bus) &&
+                   (mlx5_dev[i].pci_addr.devid == pci_addr->devid) &&
+                   (mlx5_dev[i].pci_addr.function == pci_addr->function))
+                       return i;
+               if ((mlx5_dev[i].ports == 0) && (ret == -1))
+                       ret = i;
+       }
+       return ret;
+}
+
+static struct eth_driver mlx5_driver;
+
+/**
+ * DPDK callback to register a PCI device.
+ *
+ * This function creates an Ethernet device for each port of a given
+ * PCI device.
+ *
+ * @param[in] pci_drv
+ *   PCI driver structure (mlx5_driver).
+ * @param[in] pci_dev
+ *   PCI device information.
+ *
+ * @return
+ *   0 on success, negative errno value on failure.
+ */
+static int
+mlx5_pci_devinit(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+{
+       struct ibv_device **list;
+       struct ibv_device *ibv_dev;
+       int err = 0;
+       struct ibv_context *attr_ctx = NULL;
+       struct ibv_device_attr device_attr;
+       unsigned int vf;
+       unsigned int mps;
+       int idx;
+       int i;
+
+       (void)pci_drv;
+       assert(pci_drv == &mlx5_driver.pci_drv);
+       /* Get mlx5_dev[] index. */
+       idx = mlx5_dev_idx(&pci_dev->addr);
+       if (idx == -1) {
+               ERROR("this driver cannot support any more adapters");
+               return -ENOMEM;
+       }
+       DEBUG("using driver device index %d", idx);
+
+       /* Save PCI address. */
+       mlx5_dev[idx].pci_addr = pci_dev->addr;
+       list = ibv_get_device_list(&i);
+       if (list == NULL) {
+               assert(errno);
+               if (errno == ENOSYS) {
+                       WARN("cannot list devices, is ib_uverbs loaded?");
+                       return 0;
+               }
+               return -errno;
+       }
+       assert(i >= 0);
+       /*
+        * For each listed device, check related sysfs entry against
+        * the provided PCI ID.
+        */
+       while (i != 0) {
+               struct rte_pci_addr pci_addr;
+
+               --i;
+               DEBUG("checking device \"%s\"", list[i]->name);
+               if (mlx5_ibv_device_to_pci_addr(list[i], &pci_addr))
+                       continue;
+               if ((pci_dev->addr.domain != pci_addr.domain) ||
+                   (pci_dev->addr.bus != pci_addr.bus) ||
+                   (pci_dev->addr.devid != pci_addr.devid) ||
+                   (pci_dev->addr.function != pci_addr.function))
+                       continue;
+               vf = ((pci_dev->id.device_id ==
+                      PCI_DEVICE_ID_MELLANOX_CONNECTX4VF) ||
+                     (pci_dev->id.device_id ==
+                      PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF));
+               /* Multi-packet send is only supported by ConnectX-4 Lx PF. */
+               mps = (pci_dev->id.device_id ==
+                      PCI_DEVICE_ID_MELLANOX_CONNECTX4LX);
+               INFO("PCI information matches, using device \"%s\" (VF: %s,"
+                    " MPS: %s)",
+                    list[i]->name,
+                    vf ? "true" : "false",
+                    mps ? "true" : "false");
+               attr_ctx = ibv_open_device(list[i]);
+               err = errno;
+               break;
+       }
+       if (attr_ctx == NULL) {
+               ibv_free_device_list(list);
+               switch (err) {
+               case 0:
+                       WARN("cannot access device, is mlx5_ib loaded?");
+                       return 0;
+               case EINVAL:
+                       WARN("cannot use device, are drivers up to date?");
+                       return 0;
+               }
+               assert(err > 0);
+               return -err;
+       }
+       ibv_dev = list[i];
+
+       DEBUG("device opened");
+       if (ibv_query_device(attr_ctx, &device_attr))
+               goto error;
+       INFO("%u port(s) detected", device_attr.phys_port_cnt);
+
+       for (i = 0; i < device_attr.phys_port_cnt; i++) {
+               uint32_t port = i + 1; /* ports are indexed from one */
+               uint32_t test = (1 << i);
+               struct ibv_context *ctx = NULL;
+               struct ibv_port_attr port_attr;
+               struct ibv_pd *pd = NULL;
+               struct priv *priv = NULL;
+               struct rte_eth_dev *eth_dev;
+#ifdef HAVE_EXP_QUERY_DEVICE
+               struct ibv_exp_device_attr exp_device_attr;
+#endif /* HAVE_EXP_QUERY_DEVICE */
+               struct ether_addr mac;
+
+#ifdef HAVE_EXP_QUERY_DEVICE
+               exp_device_attr.comp_mask =
+                       IBV_EXP_DEVICE_ATTR_EXP_CAP_FLAGS |
+                       IBV_EXP_DEVICE_ATTR_RX_HASH |
+#ifdef HAVE_EXP_DEVICE_ATTR_VLAN_OFFLOADS
+                       IBV_EXP_DEVICE_ATTR_VLAN_OFFLOADS |
+#endif /* HAVE_EXP_DEVICE_ATTR_VLAN_OFFLOADS */
+#ifdef HAVE_VERBS_RX_END_PADDING
+                       IBV_EXP_DEVICE_ATTR_RX_PAD_END_ALIGN |
+#endif /* HAVE_VERBS_RX_END_PADDING */
+                       0;
+#endif /* HAVE_EXP_QUERY_DEVICE */
+
+               DEBUG("using port %u (%08" PRIx32 ")", port, test);
+
+               ctx = ibv_open_device(ibv_dev);
+               if (ctx == NULL)
+                       goto port_error;
+
+               /* Check port status. */
+               err = ibv_query_port(ctx, port, &port_attr);
+               if (err) {
+                       ERROR("port query failed: %s", strerror(err));
+                       goto port_error;
+               }
+
+               if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
+                       ERROR("port %d is not configured in Ethernet mode",
+                             port);
+                       goto port_error;
+               }
+
+               if (port_attr.state != IBV_PORT_ACTIVE)
+                       DEBUG("port %d is not active: \"%s\" (%d)",
+                             port, ibv_port_state_str(port_attr.state),
+                             port_attr.state);
+
+               /* Allocate protection domain. */
+               pd = ibv_alloc_pd(ctx);
+               if (pd == NULL) {
+                       ERROR("PD allocation failure");
+                       err = ENOMEM;
+                       goto port_error;
+               }
+
+               mlx5_dev[idx].ports |= test;
+
+               /* from rte_ethdev.c */
+               priv = rte_zmalloc("ethdev private structure",
+                                  sizeof(*priv),
+                                  RTE_CACHE_LINE_SIZE);
+               if (priv == NULL) {
+                       ERROR("priv allocation failure");
+                       err = ENOMEM;
+                       goto port_error;
+               }
+
+               priv->ctx = ctx;
+               priv->device_attr = device_attr;
+               priv->port = port;
+               priv->pd = pd;
+               priv->mtu = ETHER_MTU;
+#ifdef HAVE_EXP_QUERY_DEVICE
+               if (ibv_exp_query_device(ctx, &exp_device_attr)) {
+                       ERROR("ibv_exp_query_device() failed");
+                       goto port_error;
+               }
+
+               priv->hw_csum =
+                       ((exp_device_attr.exp_device_cap_flags &
+                         IBV_EXP_DEVICE_RX_CSUM_TCP_UDP_PKT) &&
+                        (exp_device_attr.exp_device_cap_flags &
+                         IBV_EXP_DEVICE_RX_CSUM_IP_PKT));
+               DEBUG("checksum offloading is %ssupported",
+                     (priv->hw_csum ? "" : "not "));
+
+               priv->hw_csum_l2tun = !!(exp_device_attr.exp_device_cap_flags &
+                                        IBV_EXP_DEVICE_VXLAN_SUPPORT);
+               DEBUG("L2 tunnel checksum offloads are %ssupported",
+                     (priv->hw_csum_l2tun ? "" : "not "));
+
+               priv->ind_table_max_size = exp_device_attr.rx_hash_caps.max_rwq_indirection_table_size;
+               /* Remove this check once DPDK supports larger/variable
+                * indirection tables. */
+               if (priv->ind_table_max_size > (unsigned int)RSS_INDIRECTION_TABLE_SIZE)
+                       priv->ind_table_max_size = RSS_INDIRECTION_TABLE_SIZE;
+               DEBUG("maximum RX indirection table size is %u",
+                     priv->ind_table_max_size);
+#ifdef HAVE_EXP_DEVICE_ATTR_VLAN_OFFLOADS
+               priv->hw_vlan_strip = !!(exp_device_attr.wq_vlan_offloads_cap &
+                                        IBV_EXP_RECEIVE_WQ_CVLAN_STRIP);
+#endif /* HAVE_EXP_DEVICE_ATTR_VLAN_OFFLOADS */
+               DEBUG("VLAN stripping is %ssupported",
+                     (priv->hw_vlan_strip ? "" : "not "));
+
+#ifdef HAVE_VERBS_FCS
+               priv->hw_fcs_strip = !!(exp_device_attr.exp_device_cap_flags &
+                                       IBV_EXP_DEVICE_SCATTER_FCS);
+#endif /* HAVE_VERBS_FCS */
+               DEBUG("FCS stripping configuration is %ssupported",
+                     (priv->hw_fcs_strip ? "" : "not "));
+
+#ifdef HAVE_VERBS_RX_END_PADDING
+               priv->hw_padding = !!exp_device_attr.rx_pad_end_addr_align;
+#endif /* HAVE_VERBS_RX_END_PADDING */
+               DEBUG("hardware RX end alignment padding is %ssupported",
+                     (priv->hw_padding ? "" : "not "));
+
+#else /* HAVE_EXP_QUERY_DEVICE */
+               priv->ind_table_max_size = RSS_INDIRECTION_TABLE_SIZE;
+#endif /* HAVE_EXP_QUERY_DEVICE */
+
+               priv->vf = vf;
+               priv->mps = mps;
+               /* Allocate and register default RSS hash keys. */
+               priv->rss_conf = rte_calloc(__func__, hash_rxq_init_n,
+                                           sizeof((*priv->rss_conf)[0]), 0);
+               if (priv->rss_conf == NULL) {
+                       err = ENOMEM;
+                       goto port_error;
+               }
+               err = rss_hash_rss_conf_new_key(priv,
+                                               rss_hash_default_key,
+                                               rss_hash_default_key_len,
+                                               ETH_RSS_PROTO_MASK);
+               if (err)
+                       goto port_error;
+               /* Configure the first MAC address by default. */
+               if (priv_get_mac(priv, &mac.addr_bytes)) {
+                       ERROR("cannot get MAC address, is mlx5_en loaded?"
+                             " (errno: %s)", strerror(errno));
+                       goto port_error;
+               }
+               INFO("port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+                    priv->port,
+                    mac.addr_bytes[0], mac.addr_bytes[1],
+                    mac.addr_bytes[2], mac.addr_bytes[3],
+                    mac.addr_bytes[4], mac.addr_bytes[5]);
+               /* Register MAC address. */
+               claim_zero(priv_mac_addr_add(priv, 0,
+                                            (const uint8_t (*)[ETHER_ADDR_LEN])
+                                            mac.addr_bytes));
+               /* Initialize FD filters list. */
+               err = fdir_init_filters_list(priv);
+               if (err)
+                       goto port_error;
+#ifndef NDEBUG
+               {
+                       char ifname[IF_NAMESIZE];
+
+                       if (priv_get_ifname(priv, &ifname) == 0)
+                               DEBUG("port %u ifname is \"%s\"",
+                                     priv->port, ifname);
+                       else
+                               DEBUG("port %u ifname is unknown", priv->port);
+               }
+#endif
+               /* Get actual MTU if possible. */
+               priv_get_mtu(priv, &priv->mtu);
+               DEBUG("port %u MTU is %u", priv->port, priv->mtu);
+
+               /* from rte_ethdev.c */
+               {
+                       char name[RTE_ETH_NAME_MAX_LEN];
+
+                       snprintf(name, sizeof(name), "%s port %u",
+                                ibv_get_device_name(ibv_dev), port);
+                       eth_dev = rte_eth_dev_allocate(name, RTE_ETH_DEV_PCI);
+               }
+               if (eth_dev == NULL) {
+                       ERROR("can not allocate rte ethdev");
+                       err = ENOMEM;
+                       goto port_error;
+               }
+
+               /* Secondary processes have to use local storage for their
+                * private data as well as a copy of eth_dev->data, but this
+                * pointer must not be modified before burst functions are
+                * actually called. */
+               if (mlx5_is_secondary()) {
+                       struct mlx5_secondary_data *sd =
+                               &mlx5_secondary_data[eth_dev->data->port_id];
+                       sd->primary_priv = eth_dev->data->dev_private;
+                       if (sd->primary_priv == NULL) {
+                               ERROR("no private data for port %u",
+                                               eth_dev->data->port_id);
+                               err = EINVAL;
+                               goto port_error;
+                       }
+                       sd->shared_dev_data = eth_dev->data;
+                       rte_spinlock_init(&sd->lock);
+                       memcpy(sd->data.name, sd->shared_dev_data->name,
+                                  sizeof(sd->data.name));
+                       sd->data.dev_private = priv;
+                       sd->data.rx_mbuf_alloc_failed = 0;
+                       sd->data.mtu = ETHER_MTU;
+                       sd->data.port_id = sd->shared_dev_data->port_id;
+                       sd->data.mac_addrs = priv->mac;
+                       eth_dev->tx_pkt_burst = mlx5_tx_burst_secondary_setup;
+                       eth_dev->rx_pkt_burst = mlx5_rx_burst_secondary_setup;
+               } else {
+                       eth_dev->data->dev_private = priv;
+                       eth_dev->data->rx_mbuf_alloc_failed = 0;
+                       eth_dev->data->mtu = ETHER_MTU;
+                       eth_dev->data->mac_addrs = priv->mac;
+               }
+
+               eth_dev->pci_dev = pci_dev;
+               rte_eth_copy_pci_info(eth_dev, pci_dev);
+               eth_dev->driver = &mlx5_driver;
+               priv->dev = eth_dev;
+               eth_dev->dev_ops = &mlx5_dev_ops;
+
+               TAILQ_INIT(&eth_dev->link_intr_cbs);
+
+               /* Bring Ethernet device up. */
+               DEBUG("forcing Ethernet interface up");
+               priv_set_flags(priv, ~IFF_UP, IFF_UP);
+               continue;
+
+port_error:
+               if (priv) {
+                       rte_free(priv->rss_conf);
+                       rte_free(priv);
+               }
+               if (pd)
+                       claim_zero(ibv_dealloc_pd(pd));
+               if (ctx)
+                       claim_zero(ibv_close_device(ctx));
+               break;
+       }
+
+       /*
+        * XXX if something went wrong in the loop above, there is a resource
+        * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
+        * long as the dpdk does not provide a way to deallocate a ethdev and a
+        * way to enumerate the registered ethdevs to free the previous ones.
+        */
+
+       /* no port found, complain */
+       if (!mlx5_dev[idx].ports) {
+               err = ENODEV;
+               goto error;
+       }
+
+error:
+       if (attr_ctx)
+               claim_zero(ibv_close_device(attr_ctx));
+       if (list)
+               ibv_free_device_list(list);
+       assert(err >= 0);
+       return -err;
+}
+
+static const struct rte_pci_id mlx5_pci_id_map[] = {
+       {
+               .vendor_id = PCI_VENDOR_ID_MELLANOX,
+               .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX4,
+               .subsystem_vendor_id = PCI_ANY_ID,
+               .subsystem_device_id = PCI_ANY_ID
+       },
+       {
+               .vendor_id = PCI_VENDOR_ID_MELLANOX,
+               .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX4VF,
+               .subsystem_vendor_id = PCI_ANY_ID,
+               .subsystem_device_id = PCI_ANY_ID
+       },
+       {
+               .vendor_id = PCI_VENDOR_ID_MELLANOX,
+               .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX4LX,
+               .subsystem_vendor_id = PCI_ANY_ID,
+               .subsystem_device_id = PCI_ANY_ID
+       },
+       {
+               .vendor_id = PCI_VENDOR_ID_MELLANOX,
+               .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF,
+               .subsystem_vendor_id = PCI_ANY_ID,
+               .subsystem_device_id = PCI_ANY_ID
+       },
+       {
+               .vendor_id = 0
+       }
+};
+
+static struct eth_driver mlx5_driver = {
+       .pci_drv = {
+               .name = MLX5_DRIVER_NAME,
+               .id_table = mlx5_pci_id_map,
+               .devinit = mlx5_pci_devinit,
+               .drv_flags = RTE_PCI_DRV_INTR_LSC,
+       },
+       .dev_private_size = sizeof(struct priv)
+};
+
+/**
+ * Driver initialization routine.
+ */
+static int
+rte_mlx5_pmd_init(const char *name, const char *args)
+{
+       (void)name;
+       (void)args;
+       /*
+        * RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
+        * huge pages. Calling ibv_fork_init() during init allows
+        * applications to use fork() safely for purposes other than
+        * using this PMD, which is not supported in forked processes.
+        */
+       setenv("RDMAV_HUGEPAGES_SAFE", "1", 1);
+       ibv_fork_init();
+       rte_eal_pci_register(&mlx5_driver.pci_drv);
+       return 0;
+}
+
+static struct rte_driver rte_mlx5_driver = {
+       .type = PMD_PDEV,
+       .name = MLX5_DRIVER_NAME,
+       .init = rte_mlx5_pmd_init,
+};
+
+PMD_REGISTER_DRIVER(rte_mlx5_driver)