#include "mlx5_defs.h"
#include "mlx5_glue.h"
#include "mlx5_mr.h"
+#include "mlx5_flow.h"
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
/* Allow L3 VXLAN flow creation. */
#define MLX5_L3_VXLAN_EN "l3_vxlan_en"
+/* Activate DV flow steering. */
+#define MLX5_DV_FLOW_EN "dv_flow_en"
+
/* Activate Netlink support in VF mode. */
#define MLX5_VF_NL_EN "vf_nl_en"
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
close(priv->nl_socket_rdma);
- if (priv->mnl_socket)
- mlx5_nl_flow_socket_destroy(priv->mnl_socket);
+ if (priv->tcf_context)
+ mlx5_flow_tcf_context_destroy(priv->tcf_context);
ret = mlx5_hrxq_ibv_verify(dev);
if (ret)
DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
}
memset(priv, 0, sizeof(*priv));
priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
+ /*
+ * flag to rte_eth_dev_close() that it should release the port resources
+ * (calling rte_eth_dev_release_port()) in addition to closing it.
+ */
+ dev->data->dev_flags |= RTE_ETH_DEV_CLOSE_REMOVE;
+ /*
+ * Reset mac_addrs to NULL such that it is not freed as part of
+ * rte_eth_dev_release_port(). mac_addrs is part of dev_private so
+ * it is freed when dev_private is freed.
+ */
+ dev->data->mac_addrs = NULL;
}
const struct eth_dev_ops mlx5_dev_ops = {
} else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
config->txqs_inline = tmp;
} else if (strcmp(MLX5_TXQ_MPW_EN, key) == 0) {
- config->mps = !!tmp ? config->mps : 0;
+ config->mps = !!tmp;
} else if (strcmp(MLX5_TXQ_MPW_HDR_DSEG_EN, key) == 0) {
config->mpw_hdr_dseg = !!tmp;
} else if (strcmp(MLX5_TXQ_MAX_INLINE_LEN, key) == 0) {
config->l3_vxlan_en = !!tmp;
} else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
config->vf_nl_en = !!tmp;
+ } else if (strcmp(MLX5_DV_FLOW_EN, key) == 0) {
+ config->dv_flow_en = !!tmp;
} else {
DRV_LOG(WARNING, "%s: unknown parameter", key);
rte_errno = EINVAL;
MLX5_RX_VEC_EN,
MLX5_L3_VXLAN_EN,
MLX5_VF_NL_EN,
+ MLX5_DV_FLOW_EN,
MLX5_REPRESENTOR,
NULL,
};
static void *uar_base;
static int
-find_lower_va_bound(const struct rte_memseg_list *msl __rte_unused,
+find_lower_va_bound(const struct rte_memseg_list *msl,
const struct rte_memseg *ms, void *arg)
{
void **addr = arg;
+ if (msl->external)
+ return 0;
if (*addr == NULL)
*addr = ms->addr;
else
*
* @return
* A valid Ethernet device object on success, NULL otherwise and rte_errno
- * is set. The following error is defined:
+ * is set. The following errors are defined:
*
* EBUSY: device is not supposed to be spawned.
+ * EEXIST: device is already spawned
*/
static struct rte_eth_dev *
mlx5_dev_spawn(struct rte_device *dpdk_dev,
struct mlx5dv_context dv_attr = { .comp_mask = 0 };
struct mlx5_dev_config config = {
.vf = !!vf,
+ .mps = MLX5_ARG_UNSET,
.tx_vec_en = 1,
.rx_vec_en = 1,
.mpw_hdr_dseg = 0,
unsigned int mprq_max_stride_size_n = 0;
unsigned int mprq_min_stride_num_n = 0;
unsigned int mprq_max_stride_num_n = 0;
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- struct ibv_counter_set_description cs_desc = { .counter_type = 0 };
-#endif
struct ether_addr mac;
char name[RTE_ETH_NAME_MAX_LEN];
int own_domain_id = 0;
+ uint16_t port_id;
unsigned int i;
/* Determine if this port representor is supposed to be spawned. */
return NULL;
}
}
+ /* Build device name. */
+ if (!switch_info->representor)
+ rte_strlcpy(name, dpdk_dev->name, sizeof(name));
+ else
+ snprintf(name, sizeof(name), "%s_representor_%u",
+ dpdk_dev->name, switch_info->port_name);
+ /* check if the device is already spawned */
+ if (rte_eth_dev_get_port_by_name(name, &port_id) == 0) {
+ rte_errno = EEXIST;
+ return NULL;
+ }
/* Prepare shared data between primary and secondary process. */
mlx5_prepare_shared_data();
errno = 0;
DRV_LOG(DEBUG, "MPW isn't supported");
mps = MLX5_MPW_DISABLED;
}
- config.mps = mps;
#ifdef HAVE_IBV_MLX5_MOD_SWP
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
DEBUG("ibv_query_device_ex() failed");
goto error;
}
- if (!switch_info->representor)
- rte_strlcpy(name, dpdk_dev->name, sizeof(name));
- else
- snprintf(name, sizeof(name), "%s_representor_%u",
- dpdk_dev->name, switch_info->port_name);
DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
eth_dev = rte_eth_dev_attach_secondary(name);
config.hw_csum = !!(attr.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM);
DRV_LOG(DEBUG, "checksum offloading is %ssupported",
(config.hw_csum ? "" : "not "));
-#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- config.flow_counter_en = !!attr.max_counter_sets;
- mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
- DRV_LOG(DEBUG, "counter type = %d, num of cs = %ld, attributes = %d",
- cs_desc.counter_type, cs_desc.num_of_cs,
- cs_desc.attributes);
+#if !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V42) && \
+ !defined(HAVE_IBV_DEVICE_COUNTERS_SET_V45)
+ DRV_LOG(DEBUG, "counters are not supported");
+#endif
+#ifndef HAVE_IBV_FLOW_DV_SUPPORT
+ if (config.dv_flow_en) {
+ DRV_LOG(WARNING, "DV flow is not supported");
+ config.dv_flow_en = 0;
+ }
#endif
config.ind_table_max_size =
attr.rss_caps.max_rwq_indirection_table_size;
(1 << IBV_QPT_RAW_PACKET)));
if (config.tso)
config.tso_max_payload_sz = attr.tso_caps.max_tso;
- if (config.mps && !mps) {
- DRV_LOG(ERR,
- "multi-packet send not supported on this device"
- " (" MLX5_TXQ_MPW_EN ")");
- err = ENOTSUP;
- goto error;
- }
+ /*
+ * MPW is disabled by default, while the Enhanced MPW is enabled
+ * by default.
+ */
+ if (config.mps == MLX5_ARG_UNSET)
+ config.mps = (mps == MLX5_MPW_ENHANCED) ? MLX5_MPW_ENHANCED :
+ MLX5_MPW_DISABLED;
+ else
+ config.mps = config.mps ? mps : MLX5_MPW_DISABLED;
DRV_LOG(INFO, "%sMPS is %s",
config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
err = ENOMEM;
goto error;
}
- if (priv->representor)
+ if (priv->representor) {
eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
+ eth_dev->data->representor_id = priv->representor_id;
+ }
eth_dev->data->dev_private = priv;
priv->dev_data = eth_dev->data;
eth_dev->data->mac_addrs = priv->mac;
eth_dev->device = dpdk_dev;
- eth_dev->device->driver = &mlx5_driver.driver;
err = mlx5_uar_init_primary(eth_dev);
if (err) {
err = rte_errno;
claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
if (vf && config.vf_nl_en)
mlx5_nl_mac_addr_sync(eth_dev);
- priv->mnl_socket = mlx5_nl_flow_socket_create();
- if (!priv->mnl_socket) {
+ priv->tcf_context = mlx5_flow_tcf_context_create();
+ if (!priv->tcf_context) {
err = -rte_errno;
DRV_LOG(WARNING,
"flow rules relying on switch offloads will not be"
error.message =
"cannot retrieve network interface index";
} else {
- err = mlx5_nl_flow_init(priv->mnl_socket, ifindex,
- &error);
+ err = mlx5_flow_tcf_init(priv->tcf_context,
+ ifindex, &error);
}
if (err) {
DRV_LOG(WARNING,
"flow rules relying on switch offloads will"
" not be supported: %s: %s",
error.message, strerror(rte_errno));
- mlx5_nl_flow_socket_destroy(priv->mnl_socket);
- priv->mnl_socket = NULL;
+ mlx5_flow_tcf_context_destroy(priv->tcf_context);
+ priv->tcf_context = NULL;
}
}
TAILQ_INIT(&priv->flows);
close(priv->nl_socket_route);
if (priv->nl_socket_rdma >= 0)
close(priv->nl_socket_rdma);
- if (priv->mnl_socket)
- mlx5_nl_flow_socket_destroy(priv->mnl_socket);
+ if (priv->tcf_context)
+ mlx5_flow_tcf_context_destroy(priv->tcf_context);
if (own_domain_id)
claim_zero(rte_eth_switch_domain_free(priv->domain_id));
rte_free(priv);
+ if (eth_dev != NULL)
+ eth_dev->data->dev_private = NULL;
}
if (pd)
claim_zero(mlx5_glue->dealloc_pd(pd));
- if (eth_dev)
+ if (eth_dev != NULL) {
+ /* mac_addrs must not be freed alone because part of dev_private */
+ eth_dev->data->mac_addrs = NULL;
rte_eth_dev_release_port(eth_dev);
+ }
if (ctx)
claim_zero(mlx5_glue->close_device(ctx));
assert(err > 0);
list[i].eth_dev = mlx5_dev_spawn
(&pci_dev->device, list[i].ibv_dev, vf, &list[i].info);
if (!list[i].eth_dev) {
- if (rte_errno != EBUSY)
+ if (rte_errno != EBUSY && rte_errno != EEXIST)
break;
- /* Device is disabled, ignore it. */
+ /* Device is disabled or already spawned. Ignore it. */
continue;
}
restore = list[i].eth_dev->data->dev_flags;
if (!list[i].eth_dev)
continue;
mlx5_dev_close(list[i].eth_dev);
- if (rte_eal_process_type() == RTE_PROC_PRIMARY)
- rte_free(list[i].eth_dev->data->dev_private);
+ /* mac_addrs must not be freed because in dev_private */
+ list[i].eth_dev->data->mac_addrs = NULL;
claim_zero(rte_eth_dev_release_port(list[i].eth_dev));
}
/* Restore original error. */
return ret;
}
+/**
+ * DPDK callback to remove a PCI device.
+ *
+ * This function removes all Ethernet devices belong to a given PCI device.
+ *
+ * @param[in] pci_dev
+ * Pointer to the PCI device.
+ *
+ * @return
+ * 0 on success, the function cannot fail.
+ */
+static int
+mlx5_pci_remove(struct rte_pci_device *pci_dev)
+{
+ uint16_t port_id;
+ struct rte_eth_dev *port;
+
+ for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++) {
+ port = &rte_eth_devices[port_id];
+ if (port->state != RTE_ETH_DEV_UNUSED &&
+ port->device == &pci_dev->device)
+ rte_eth_dev_close(port_id);
+ }
+ return 0;
+}
+
static const struct rte_pci_id mlx5_pci_id_map[] = {
{
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
},
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX5BFVF)
+ },
{
.vendor_id = 0
}
},
.id_table = mlx5_pci_id_map,
.probe = mlx5_pci_probe,
- .drv_flags = RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV,
+ .remove = mlx5_pci_remove,
+ .drv_flags = (RTE_PCI_DRV_INTR_LSC | RTE_PCI_DRV_INTR_RMV |
+ RTE_PCI_DRV_PROBE_AGAIN),
};
#ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
Code Review / deb_dpdk.git / blobdiff