/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2015 6WIND S.A.
- * Copyright 2015 Mellanox.
+ * Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
#include <errno.h>
#include <net/if.h>
#include <sys/mman.h>
+#include <linux/netlink.h>
+#include <linux/rtnetlink.h>
/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
#include <rte_config.h>
#include <rte_eal_memconfig.h>
#include <rte_kvargs.h>
+#include <rte_rwlock.h>
+#include <rte_spinlock.h>
+#include <rte_string_fns.h>
#include "mlx5.h"
#include "mlx5_utils.h"
#include "mlx5_autoconf.h"
#include "mlx5_defs.h"
#include "mlx5_glue.h"
+#include "mlx5_mr.h"
/* Device parameter to enable RX completion queue compression. */
#define MLX5_RXQ_CQE_COMP_EN "rxq_cqe_comp_en"
+/* Device parameter to enable Multi-Packet Rx queue. */
+#define MLX5_RX_MPRQ_EN "mprq_en"
+
+/* Device parameter to configure log 2 of the number of strides for MPRQ. */
+#define MLX5_RX_MPRQ_LOG_STRIDE_NUM "mprq_log_stride_num"
+
+/* Device parameter to limit the size of memcpy'd packet for MPRQ. */
+#define MLX5_RX_MPRQ_MAX_MEMCPY_LEN "mprq_max_memcpy_len"
+
+/* Device parameter to set the minimum number of Rx queues to enable MPRQ. */
+#define MLX5_RXQS_MIN_MPRQ "rxqs_min_mprq"
+
/* Device parameter to configure inline send. */
#define MLX5_TXQ_INLINE "txq_inline"
/* Device parameter to enable hardware Rx vector. */
#define MLX5_RX_VEC_EN "rx_vec_en"
+/* Allow L3 VXLAN flow creation. */
+#define MLX5_L3_VXLAN_EN "l3_vxlan_en"
+
+/* Activate Netlink support in VF mode. */
+#define MLX5_VF_NL_EN "vf_nl_en"
+
+/* Select port representors to instantiate. */
+#define MLX5_REPRESENTOR "representor"
+
#ifndef HAVE_IBV_MLX5_MOD_MPW
#define MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED (1 << 2)
#define MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW (1 << 3)
#define MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP (1 << 4)
#endif
+static const char *MZ_MLX5_PMD_SHARED_DATA = "mlx5_pmd_shared_data";
+
+/* Shared memory between primary and secondary processes. */
+struct mlx5_shared_data *mlx5_shared_data;
+
+/* Spinlock for mlx5_shared_data allocation. */
+static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
+
+/** Driver-specific log messages type. */
+int mlx5_logtype;
+
+/**
+ * Prepare shared data between primary and secondary process.
+ */
+static void
+mlx5_prepare_shared_data(void)
+{
+ const struct rte_memzone *mz;
+
+ rte_spinlock_lock(&mlx5_shared_data_lock);
+ if (mlx5_shared_data == NULL) {
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ /* Allocate shared memory. */
+ mz = rte_memzone_reserve(MZ_MLX5_PMD_SHARED_DATA,
+ sizeof(*mlx5_shared_data),
+ SOCKET_ID_ANY, 0);
+ } else {
+ /* Lookup allocated shared memory. */
+ mz = rte_memzone_lookup(MZ_MLX5_PMD_SHARED_DATA);
+ }
+ if (mz == NULL)
+ rte_panic("Cannot allocate mlx5 shared data\n");
+ mlx5_shared_data = mz->addr;
+ /* Initialize shared data. */
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
+ LIST_INIT(&mlx5_shared_data->mem_event_cb_list);
+ rte_rwlock_init(&mlx5_shared_data->mem_event_rwlock);
+ }
+ rte_mem_event_callback_register("MLX5_MEM_EVENT_CB",
+ mlx5_mr_mem_event_cb, NULL);
+ }
+ rte_spinlock_unlock(&mlx5_shared_data_lock);
+}
+
/**
* Retrieve integer value from environment variable.
*
* A pointer to the callback data.
*
* @return
- * a pointer to the allocate space.
+ * Allocated buffer, NULL otherwise and rte_errno is set.
*/
static void *
mlx5_alloc_verbs_buf(size_t size, void *data)
}
assert(data != NULL);
ret = rte_malloc_socket(__func__, size, alignment, socket);
- DEBUG("Extern alloc size: %lu, align: %lu: %p", size, alignment, ret);
+ if (!ret && size)
+ rte_errno = ENOMEM;
return ret;
}
mlx5_free_verbs_buf(void *ptr, void *data __rte_unused)
{
assert(data != NULL);
- DEBUG("Extern free request: %p", ptr);
rte_free(ptr);
}
unsigned int i;
int ret;
- priv_lock(priv);
- DEBUG("%p: closing device \"%s\"",
- (void *)dev,
- ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
+ DRV_LOG(DEBUG, "port %u closing device \"%s\"",
+ dev->data->port_id,
+ ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
/* In case mlx5_dev_stop() has not been called. */
- priv_dev_interrupt_handler_uninstall(priv, dev);
- priv_dev_traffic_disable(priv, dev);
+ mlx5_dev_interrupt_handler_uninstall(dev);
+ mlx5_traffic_disable(dev);
+ mlx5_flow_flush(dev, NULL);
/* Prevent crashes when queues are still in use. */
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
/* XXX race condition if mlx5_rx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->rxqs_n); ++i)
- mlx5_priv_rxq_release(priv, i);
+ mlx5_rxq_release(dev, i);
priv->rxqs_n = 0;
priv->rxqs = NULL;
}
/* XXX race condition if mlx5_tx_burst() is still running. */
usleep(1000);
for (i = 0; (i != priv->txqs_n); ++i)
- mlx5_priv_txq_release(priv, i);
+ mlx5_txq_release(dev, i);
priv->txqs_n = 0;
priv->txqs = NULL;
}
+ mlx5_mprq_free_mp(dev);
+ mlx5_mr_release(dev);
if (priv->pd != NULL) {
assert(priv->ctx != NULL);
claim_zero(mlx5_glue->dealloc_pd(priv->pd));
if (priv->reta_idx != NULL)
rte_free(priv->reta_idx);
if (priv->primary_socket)
- priv_socket_uninit(priv);
- ret = mlx5_priv_hrxq_ibv_verify(priv);
+ mlx5_socket_uninit(dev);
+ if (priv->config.vf)
+ mlx5_nl_mac_addr_flush(dev);
+ if (priv->nl_socket_route >= 0)
+ close(priv->nl_socket_route);
+ if (priv->nl_socket_rdma >= 0)
+ close(priv->nl_socket_rdma);
+ if (priv->mnl_socket)
+ mlx5_nl_flow_socket_destroy(priv->mnl_socket);
+ ret = mlx5_hrxq_ibv_verify(dev);
if (ret)
- WARN("%p: some Hash Rx queue still remain", (void *)priv);
- ret = mlx5_priv_ind_table_ibv_verify(priv);
+ DRV_LOG(WARNING, "port %u some hash Rx queue still remain",
+ dev->data->port_id);
+ ret = mlx5_ind_table_ibv_verify(dev);
if (ret)
- WARN("%p: some Indirection table still remain", (void *)priv);
- ret = mlx5_priv_rxq_ibv_verify(priv);
+ DRV_LOG(WARNING, "port %u some indirection table still remain",
+ dev->data->port_id);
+ ret = mlx5_rxq_ibv_verify(dev);
if (ret)
- WARN("%p: some Verbs Rx queue still remain", (void *)priv);
- ret = mlx5_priv_rxq_verify(priv);
+ DRV_LOG(WARNING, "port %u some Verbs Rx queue still remain",
+ dev->data->port_id);
+ ret = mlx5_rxq_verify(dev);
if (ret)
- WARN("%p: some Rx Queues still remain", (void *)priv);
- ret = mlx5_priv_txq_ibv_verify(priv);
+ DRV_LOG(WARNING, "port %u some Rx queues still remain",
+ dev->data->port_id);
+ ret = mlx5_txq_ibv_verify(dev);
if (ret)
- WARN("%p: some Verbs Tx queue still remain", (void *)priv);
- ret = mlx5_priv_txq_verify(priv);
+ DRV_LOG(WARNING, "port %u some Verbs Tx queue still remain",
+ dev->data->port_id);
+ ret = mlx5_txq_verify(dev);
if (ret)
- WARN("%p: some Tx Queues still remain", (void *)priv);
- ret = priv_flow_verify(priv);
+ DRV_LOG(WARNING, "port %u some Tx queues still remain",
+ dev->data->port_id);
+ ret = mlx5_flow_verify(dev);
if (ret)
- WARN("%p: some flows still remain", (void *)priv);
- ret = priv_mr_verify(priv);
- if (ret)
- WARN("%p: some Memory Region still remain", (void *)priv);
- priv_unlock(priv);
+ DRV_LOG(WARNING, "port %u some flows still remain",
+ dev->data->port_id);
+ if (priv->domain_id != RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
+ unsigned int c = 0;
+ unsigned int i = mlx5_dev_to_port_id(dev->device, NULL, 0);
+ uint16_t port_id[i];
+
+ i = RTE_MIN(mlx5_dev_to_port_id(dev->device, port_id, i), i);
+ while (i--) {
+ struct priv *opriv =
+ rte_eth_devices[port_id[i]].data->dev_private;
+
+ if (!opriv ||
+ opriv->domain_id != priv->domain_id ||
+ &rte_eth_devices[port_id[i]] == dev)
+ continue;
+ ++c;
+ }
+ if (!c)
+ claim_zero(rte_eth_switch_domain_free(priv->domain_id));
+ }
memset(priv, 0, sizeof(*priv));
+ priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
}
const struct eth_dev_ops mlx5_dev_ops = {
.mac_addr_remove = mlx5_mac_addr_remove,
.mac_addr_add = mlx5_mac_addr_add,
.mac_addr_set = mlx5_mac_addr_set,
+ .set_mc_addr_list = mlx5_set_mc_addr_list,
.mtu_set = mlx5_dev_set_mtu,
.vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
.vlan_offload_set = mlx5_vlan_offload_set,
.dev_set_link_down = mlx5_set_link_down,
.dev_set_link_up = mlx5_set_link_up,
.dev_close = mlx5_dev_close,
+ .promiscuous_enable = mlx5_promiscuous_enable,
+ .promiscuous_disable = mlx5_promiscuous_disable,
+ .allmulticast_enable = mlx5_allmulticast_enable,
+ .allmulticast_disable = mlx5_allmulticast_disable,
.link_update = mlx5_link_update,
.stats_get = mlx5_stats_get,
.stats_reset = mlx5_stats_reset,
.mac_addr_remove = mlx5_mac_addr_remove,
.mac_addr_add = mlx5_mac_addr_add,
.mac_addr_set = mlx5_mac_addr_set,
+ .set_mc_addr_list = mlx5_set_mc_addr_list,
.mtu_set = mlx5_dev_set_mtu,
.vlan_strip_queue_set = mlx5_vlan_strip_queue_set,
.vlan_offload_set = mlx5_vlan_offload_set,
.is_removed = mlx5_is_removed,
};
-static struct {
- struct rte_pci_addr pci_addr; /* associated PCI address */
- uint32_t ports; /* physical ports bitfield. */
-} mlx5_dev[32];
-
-/**
- * Get device index in mlx5_dev[] from PCI bus address.
- *
- * @param[in] pci_addr
- * PCI bus address to look for.
- *
- * @return
- * mlx5_dev[] index on success, -1 on failure.
- */
-static int
-mlx5_dev_idx(struct rte_pci_addr *pci_addr)
-{
- unsigned int i;
- int ret = -1;
-
- assert(pci_addr != NULL);
- for (i = 0; (i != RTE_DIM(mlx5_dev)); ++i) {
- if ((mlx5_dev[i].pci_addr.domain == pci_addr->domain) &&
- (mlx5_dev[i].pci_addr.bus == pci_addr->bus) &&
- (mlx5_dev[i].pci_addr.devid == pci_addr->devid) &&
- (mlx5_dev[i].pci_addr.function == pci_addr->function))
- return i;
- if ((mlx5_dev[i].ports == 0) && (ret == -1))
- ret = i;
- }
- return ret;
-}
-
/**
* Verify and store value for device argument.
*
* User data.
*
* @return
- * 0 on success, negative errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_args_check(const char *key, const char *val, void *opaque)
struct mlx5_dev_config *config = opaque;
unsigned long tmp;
+ /* No-op, port representors are processed in mlx5_dev_spawn(). */
+ if (!strcmp(MLX5_REPRESENTOR, key))
+ return 0;
errno = 0;
tmp = strtoul(val, NULL, 0);
if (errno) {
- WARN("%s: \"%s\" is not a valid integer", key, val);
- return errno;
+ rte_errno = errno;
+ DRV_LOG(WARNING, "%s: \"%s\" is not a valid integer", key, val);
+ return -rte_errno;
}
if (strcmp(MLX5_RXQ_CQE_COMP_EN, key) == 0) {
config->cqe_comp = !!tmp;
+ } else if (strcmp(MLX5_RX_MPRQ_EN, key) == 0) {
+ config->mprq.enabled = !!tmp;
+ } else if (strcmp(MLX5_RX_MPRQ_LOG_STRIDE_NUM, key) == 0) {
+ config->mprq.stride_num_n = tmp;
+ } else if (strcmp(MLX5_RX_MPRQ_MAX_MEMCPY_LEN, key) == 0) {
+ config->mprq.max_memcpy_len = tmp;
+ } else if (strcmp(MLX5_RXQS_MIN_MPRQ, key) == 0) {
+ config->mprq.min_rxqs_num = tmp;
} else if (strcmp(MLX5_TXQ_INLINE, key) == 0) {
config->txq_inline = tmp;
} else if (strcmp(MLX5_TXQS_MIN_INLINE, key) == 0) {
config->tx_vec_en = !!tmp;
} else if (strcmp(MLX5_RX_VEC_EN, key) == 0) {
config->rx_vec_en = !!tmp;
+ } else if (strcmp(MLX5_L3_VXLAN_EN, key) == 0) {
+ config->l3_vxlan_en = !!tmp;
+ } else if (strcmp(MLX5_VF_NL_EN, key) == 0) {
+ config->vf_nl_en = !!tmp;
} else {
- WARN("%s: unknown parameter", key);
- return -EINVAL;
+ DRV_LOG(WARNING, "%s: unknown parameter", key);
+ rte_errno = EINVAL;
+ return -rte_errno;
}
return 0;
}
* Device arguments structure.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_args(struct mlx5_dev_config *config, struct rte_devargs *devargs)
{
const char **params = (const char *[]){
MLX5_RXQ_CQE_COMP_EN,
+ MLX5_RX_MPRQ_EN,
+ MLX5_RX_MPRQ_LOG_STRIDE_NUM,
+ MLX5_RX_MPRQ_MAX_MEMCPY_LEN,
+ MLX5_RXQS_MIN_MPRQ,
MLX5_TXQ_INLINE,
MLX5_TXQS_MIN_INLINE,
MLX5_TXQ_MPW_EN,
MLX5_TXQ_MAX_INLINE_LEN,
MLX5_TX_VEC_EN,
MLX5_RX_VEC_EN,
+ MLX5_L3_VXLAN_EN,
+ MLX5_VF_NL_EN,
+ MLX5_REPRESENTOR,
NULL,
};
struct rte_kvargs *kvlist;
if (rte_kvargs_count(kvlist, params[i])) {
ret = rte_kvargs_process(kvlist, params[i],
mlx5_args_check, config);
- if (ret != 0) {
+ if (ret) {
+ rte_errno = EINVAL;
rte_kvargs_free(kvlist);
- return ret;
+ return -rte_errno;
}
}
}
*/
static void *uar_base;
+static int
+find_lower_va_bound(const struct rte_memseg_list *msl __rte_unused,
+ const struct rte_memseg *ms, void *arg)
+{
+ void **addr = arg;
+
+ if (*addr == NULL)
+ *addr = ms->addr;
+ else
+ *addr = RTE_MIN(*addr, ms->addr);
+
+ return 0;
+}
+
/**
* Reserve UAR address space for primary process.
*
- * @param[in] priv
- * Pointer to private structure.
+ * @param[in] dev
+ * Pointer to Ethernet device.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_uar_init_primary(struct priv *priv)
+mlx5_uar_init_primary(struct rte_eth_dev *dev)
{
+ struct priv *priv = dev->data->dev_private;
void *addr = (void *)0;
- int i;
- const struct rte_mem_config *mcfg;
- int ret;
if (uar_base) { /* UAR address space mapped. */
priv->uar_base = uar_base;
return 0;
}
/* find out lower bound of hugepage segments */
- mcfg = rte_eal_get_configuration()->mem_config;
- for (i = 0; i < RTE_MAX_MEMSEG && mcfg->memseg[i].addr; i++) {
- if (addr)
- addr = RTE_MIN(addr, mcfg->memseg[i].addr);
- else
- addr = mcfg->memseg[i].addr;
- }
+ rte_memseg_walk(find_lower_va_bound, &addr);
+
/* keep distance to hugepages to minimize potential conflicts. */
- addr = RTE_PTR_SUB(addr, MLX5_UAR_OFFSET + MLX5_UAR_SIZE);
+ addr = RTE_PTR_SUB(addr, (uintptr_t)(MLX5_UAR_OFFSET + MLX5_UAR_SIZE));
/* anonymous mmap, no real memory consumption. */
addr = mmap(addr, MLX5_UAR_SIZE,
PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (addr == MAP_FAILED) {
- ERROR("Failed to reserve UAR address space, please adjust "
- "MLX5_UAR_SIZE or try --base-virtaddr");
- ret = ENOMEM;
- return ret;
+ DRV_LOG(ERR,
+ "port %u failed to reserve UAR address space, please"
+ " adjust MLX5_UAR_SIZE or try --base-virtaddr",
+ dev->data->port_id);
+ rte_errno = ENOMEM;
+ return -rte_errno;
}
/* Accept either same addr or a new addr returned from mmap if target
* range occupied.
*/
- INFO("Reserved UAR address space: %p", addr);
+ DRV_LOG(INFO, "port %u reserved UAR address space: %p",
+ dev->data->port_id, addr);
priv->uar_base = addr; /* for primary and secondary UAR re-mmap. */
uar_base = addr; /* process local, don't reserve again. */
return 0;
* Reserve UAR address space for secondary process, align with
* primary process.
*
- * @param[in] priv
- * Pointer to private structure.
+ * @param[in] dev
+ * Pointer to Ethernet device.
*
* @return
- * 0 on success, errno value on failure.
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
-priv_uar_init_secondary(struct priv *priv)
+mlx5_uar_init_secondary(struct rte_eth_dev *dev)
{
+ struct priv *priv = dev->data->dev_private;
void *addr;
- int ret;
assert(priv->uar_base);
if (uar_base) { /* already reserved. */
addr = mmap(priv->uar_base, MLX5_UAR_SIZE,
PROT_NONE, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
if (addr == MAP_FAILED) {
- ERROR("UAR mmap failed: %p size: %llu",
- priv->uar_base, MLX5_UAR_SIZE);
- ret = ENXIO;
- return ret;
+ DRV_LOG(ERR, "port %u UAR mmap failed: %p size: %llu",
+ dev->data->port_id, priv->uar_base, MLX5_UAR_SIZE);
+ rte_errno = ENXIO;
+ return -rte_errno;
}
if (priv->uar_base != addr) {
- ERROR("UAR address %p size %llu occupied, please adjust "
- "MLX5_UAR_OFFSET or try EAL parameter --base-virtaddr",
- priv->uar_base, MLX5_UAR_SIZE);
- ret = ENXIO;
- return ret;
+ DRV_LOG(ERR,
+ "port %u UAR address %p size %llu occupied, please"
+ " adjust MLX5_UAR_OFFSET or try EAL parameter"
+ " --base-virtaddr",
+ dev->data->port_id, priv->uar_base, MLX5_UAR_SIZE);
+ rte_errno = ENXIO;
+ return -rte_errno;
}
uar_base = addr; /* process local, don't reserve again */
- INFO("Reserved UAR address space: %p", addr);
+ DRV_LOG(INFO, "port %u reserved UAR address space: %p",
+ dev->data->port_id, addr);
return 0;
}
/**
- * DPDK callback to register a PCI device.
+ * Spawn an Ethernet device from Verbs information.
*
- * This function creates an Ethernet device for each port of a given
- * PCI device.
- *
- * @param[in] pci_drv
- * PCI driver structure (mlx5_driver).
- * @param[in] pci_dev
- * PCI device information.
+ * @param dpdk_dev
+ * Backing DPDK device.
+ * @param ibv_dev
+ * Verbs device.
+ * @param vf
+ * If nonzero, enable VF-specific features.
+ * @param[in] switch_info
+ * Switch properties of Ethernet device.
*
* @return
- * 0 on success, negative errno value on failure.
+ * A valid Ethernet device object on success, NULL otherwise and rte_errno
+ * is set. The following error is defined:
+ *
+ * EBUSY: device is not supposed to be spawned.
*/
-static int
-mlx5_pci_probe(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+static struct rte_eth_dev *
+mlx5_dev_spawn(struct rte_device *dpdk_dev,
+ struct ibv_device *ibv_dev,
+ int vf,
+ const struct mlx5_switch_info *switch_info)
{
- struct ibv_device **list;
- struct ibv_device *ibv_dev;
+ struct ibv_context *ctx;
+ struct ibv_device_attr_ex attr;
+ struct ibv_port_attr port_attr;
+ struct ibv_pd *pd = NULL;
+ struct mlx5dv_context dv_attr = { .comp_mask = 0 };
+ struct mlx5_dev_config config = {
+ .vf = !!vf,
+ .tx_vec_en = 1,
+ .rx_vec_en = 1,
+ .mpw_hdr_dseg = 0,
+ .txq_inline = MLX5_ARG_UNSET,
+ .txqs_inline = MLX5_ARG_UNSET,
+ .inline_max_packet_sz = MLX5_ARG_UNSET,
+ .vf_nl_en = 1,
+ .mprq = {
+ .enabled = 0,
+ .stride_num_n = MLX5_MPRQ_STRIDE_NUM_N,
+ .max_memcpy_len = MLX5_MPRQ_MEMCPY_DEFAULT_LEN,
+ .min_rxqs_num = MLX5_MPRQ_MIN_RXQS,
+ },
+ };
+ struct rte_eth_dev *eth_dev = NULL;
+ struct priv *priv = NULL;
int err = 0;
- struct ibv_context *attr_ctx = NULL;
- struct ibv_device_attr_ex device_attr;
- unsigned int sriov;
unsigned int mps;
unsigned int cqe_comp;
unsigned int tunnel_en = 0;
- int idx;
- int i;
- struct mlx5dv_context attrs_out;
+ unsigned int mpls_en = 0;
+ unsigned int swp = 0;
+ unsigned int mprq = 0;
+ unsigned int mprq_min_stride_size_n = 0;
+ unsigned int mprq_max_stride_size_n = 0;
+ unsigned int mprq_min_stride_num_n = 0;
+ unsigned int mprq_max_stride_num_n = 0;
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- struct ibv_counter_set_description cs_desc;
+ struct ibv_counter_set_description cs_desc = { .counter_type = 0 };
#endif
+ struct ether_addr mac;
+ char name[RTE_ETH_NAME_MAX_LEN];
+ int own_domain_id = 0;
+ unsigned int i;
- (void)pci_drv;
- assert(pci_drv == &mlx5_driver);
- /* Get mlx5_dev[] index. */
- idx = mlx5_dev_idx(&pci_dev->addr);
- if (idx == -1) {
- ERROR("this driver cannot support any more adapters");
- return -ENOMEM;
- }
- DEBUG("using driver device index %d", idx);
-
- /* Save PCI address. */
- mlx5_dev[idx].pci_addr = pci_dev->addr;
- list = mlx5_glue->get_device_list(&i);
- if (list == NULL) {
- assert(errno);
- if (errno == ENOSYS)
- ERROR("cannot list devices, is ib_uverbs loaded?");
- return -errno;
- }
- assert(i >= 0);
- /*
- * For each listed device, check related sysfs entry against
- * the provided PCI ID.
- */
- while (i != 0) {
- struct rte_pci_addr pci_addr;
+ /* Determine if this port representor is supposed to be spawned. */
+ if (switch_info->representor && dpdk_dev->devargs) {
+ struct rte_eth_devargs eth_da;
- --i;
- DEBUG("checking device \"%s\"", list[i]->name);
- if (mlx5_ibv_device_to_pci_addr(list[i], &pci_addr))
- continue;
- if ((pci_dev->addr.domain != pci_addr.domain) ||
- (pci_dev->addr.bus != pci_addr.bus) ||
- (pci_dev->addr.devid != pci_addr.devid) ||
- (pci_dev->addr.function != pci_addr.function))
- continue;
- sriov = ((pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX4VF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX5VF) ||
- (pci_dev->id.device_id ==
- PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF));
- switch (pci_dev->id.device_id) {
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4:
- tunnel_en = 1;
- break;
- case PCI_DEVICE_ID_MELLANOX_CONNECTX4LX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EX:
- case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
- tunnel_en = 1;
- break;
- default:
- break;
+ err = rte_eth_devargs_parse(dpdk_dev->devargs->args, ð_da);
+ if (err) {
+ rte_errno = -err;
+ DRV_LOG(ERR, "failed to process device arguments: %s",
+ strerror(rte_errno));
+ return NULL;
}
- INFO("PCI information matches, using device \"%s\""
- " (SR-IOV: %s)",
- list[i]->name,
- sriov ? "true" : "false");
- attr_ctx = mlx5_glue->open_device(list[i]);
- err = errno;
- break;
- }
- if (attr_ctx == NULL) {
- mlx5_glue->free_device_list(list);
- switch (err) {
- case 0:
- ERROR("cannot access device, is mlx5_ib loaded?");
- return -ENODEV;
- case EINVAL:
- ERROR("cannot use device, are drivers up to date?");
- return -EINVAL;
+ for (i = 0; i < eth_da.nb_representor_ports; ++i)
+ if (eth_da.representor_ports[i] ==
+ (uint16_t)switch_info->port_name)
+ break;
+ if (i == eth_da.nb_representor_ports) {
+ rte_errno = EBUSY;
+ return NULL;
}
- assert(err > 0);
- return -err;
}
- ibv_dev = list[i];
-
- DEBUG("device opened");
+ /* Prepare shared data between primary and secondary process. */
+ mlx5_prepare_shared_data();
+ errno = 0;
+ ctx = mlx5_glue->open_device(ibv_dev);
+ if (!ctx) {
+ rte_errno = errno ? errno : ENODEV;
+ return NULL;
+ }
+#ifdef HAVE_IBV_MLX5_MOD_SWP
+ dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_SWP;
+#endif
/*
* Multi-packet send is supported by ConnectX-4 Lx PF as well
* as all ConnectX-5 devices.
*/
- mlx5_glue->dv_query_device(attr_ctx, &attrs_out);
- if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
- if (attrs_out.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
- DEBUG("Enhanced MPW is supported");
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS;
+#endif
+#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
+ dv_attr.comp_mask |= MLX5DV_CONTEXT_MASK_STRIDING_RQ;
+#endif
+ mlx5_glue->dv_query_device(ctx, &dv_attr);
+ if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_MPW_ALLOWED) {
+ if (dv_attr.flags & MLX5DV_CONTEXT_FLAGS_ENHANCED_MPW) {
+ DRV_LOG(DEBUG, "enhanced MPW is supported");
mps = MLX5_MPW_ENHANCED;
} else {
- DEBUG("MPW is supported");
+ DRV_LOG(DEBUG, "MPW is supported");
mps = MLX5_MPW;
}
} else {
- DEBUG("MPW isn't supported");
+ DRV_LOG(DEBUG, "MPW isn't supported");
mps = MLX5_MPW_DISABLED;
}
+ config.mps = mps;
+#ifdef HAVE_IBV_MLX5_MOD_SWP
+ if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_SWP)
+ swp = dv_attr.sw_parsing_caps.sw_parsing_offloads;
+ DRV_LOG(DEBUG, "SWP support: %u", swp);
+#endif
+ config.swp = !!swp;
+#ifdef HAVE_IBV_DEVICE_STRIDING_RQ_SUPPORT
+ if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_STRIDING_RQ) {
+ struct mlx5dv_striding_rq_caps mprq_caps =
+ dv_attr.striding_rq_caps;
+
+ DRV_LOG(DEBUG, "\tmin_single_stride_log_num_of_bytes: %d",
+ mprq_caps.min_single_stride_log_num_of_bytes);
+ DRV_LOG(DEBUG, "\tmax_single_stride_log_num_of_bytes: %d",
+ mprq_caps.max_single_stride_log_num_of_bytes);
+ DRV_LOG(DEBUG, "\tmin_single_wqe_log_num_of_strides: %d",
+ mprq_caps.min_single_wqe_log_num_of_strides);
+ DRV_LOG(DEBUG, "\tmax_single_wqe_log_num_of_strides: %d",
+ mprq_caps.max_single_wqe_log_num_of_strides);
+ DRV_LOG(DEBUG, "\tsupported_qpts: %d",
+ mprq_caps.supported_qpts);
+ DRV_LOG(DEBUG, "device supports Multi-Packet RQ");
+ mprq = 1;
+ mprq_min_stride_size_n =
+ mprq_caps.min_single_stride_log_num_of_bytes;
+ mprq_max_stride_size_n =
+ mprq_caps.max_single_stride_log_num_of_bytes;
+ mprq_min_stride_num_n =
+ mprq_caps.min_single_wqe_log_num_of_strides;
+ mprq_max_stride_num_n =
+ mprq_caps.max_single_wqe_log_num_of_strides;
+ config.mprq.stride_num_n = RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
+ mprq_min_stride_num_n);
+ }
+#endif
if (RTE_CACHE_LINE_SIZE == 128 &&
- !(attrs_out.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
+ !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
cqe_comp = 0;
else
cqe_comp = 1;
- if (mlx5_glue->query_device_ex(attr_ctx, NULL, &device_attr))
+ config.cqe_comp = cqe_comp;
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+ if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
+ tunnel_en = ((dv_attr.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN) &&
+ (dv_attr.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE));
+ }
+ DRV_LOG(DEBUG, "tunnel offloading is %ssupported",
+ tunnel_en ? "" : "not ");
+#else
+ DRV_LOG(WARNING,
+ "tunnel offloading disabled due to old OFED/rdma-core version");
+#endif
+ config.tunnel_en = tunnel_en;
+#ifdef HAVE_IBV_DEVICE_MPLS_SUPPORT
+ mpls_en = ((dv_attr.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_GRE) &&
+ (dv_attr.tunnel_offloads_caps &
+ MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_CW_MPLS_OVER_UDP));
+ DRV_LOG(DEBUG, "MPLS over GRE/UDP tunnel offloading is %ssupported",
+ mpls_en ? "" : "not ");
+#else
+ DRV_LOG(WARNING, "MPLS over GRE/UDP tunnel offloading disabled due to"
+ " old OFED/rdma-core version or firmware configuration");
+#endif
+ config.mpls_en = mpls_en;
+ err = mlx5_glue->query_device_ex(ctx, NULL, &attr);
+ if (err) {
+ DEBUG("ibv_query_device_ex() failed");
goto error;
- INFO("%u port(s) detected", device_attr.orig_attr.phys_port_cnt);
-
- for (i = 0; i < device_attr.orig_attr.phys_port_cnt; i++) {
- char name[RTE_ETH_NAME_MAX_LEN];
- int len;
- uint32_t port = i + 1; /* ports are indexed from one */
- uint32_t test = (1 << i);
- struct ibv_context *ctx = NULL;
- struct ibv_port_attr port_attr;
- struct ibv_pd *pd = NULL;
- struct priv *priv = NULL;
- struct rte_eth_dev *eth_dev;
- struct ibv_device_attr_ex device_attr_ex;
- struct ether_addr mac;
- uint16_t num_vfs = 0;
- struct ibv_device_attr_ex device_attr;
- struct mlx5_dev_config config = {
- .cqe_comp = cqe_comp,
- .mps = mps,
- .tunnel_en = tunnel_en,
- .tx_vec_en = 1,
- .rx_vec_en = 1,
- .mpw_hdr_dseg = 0,
- .txq_inline = MLX5_ARG_UNSET,
- .txqs_inline = MLX5_ARG_UNSET,
- .inline_max_packet_sz = MLX5_ARG_UNSET,
- };
-
- len = snprintf(name, sizeof(name), PCI_PRI_FMT,
- pci_dev->addr.domain, pci_dev->addr.bus,
- pci_dev->addr.devid, pci_dev->addr.function);
- if (device_attr.orig_attr.phys_port_cnt > 1)
- snprintf(name + len, sizeof(name), " port %u", i);
-
- mlx5_dev[idx].ports |= test;
-
- if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
- eth_dev = rte_eth_dev_attach_secondary(name);
- if (eth_dev == NULL) {
- ERROR("can not attach rte ethdev");
- err = ENOMEM;
- goto error;
- }
- eth_dev->device = &pci_dev->device;
- eth_dev->dev_ops = &mlx5_dev_sec_ops;
- priv = eth_dev->data->dev_private;
- err = priv_uar_init_secondary(priv);
- if (err < 0) {
- err = -err;
- goto error;
- }
- /* Receive command fd from primary process */
- err = priv_socket_connect(priv);
- if (err < 0) {
- err = -err;
- goto error;
- }
- /* Remap UAR for Tx queues. */
- err = priv_tx_uar_remap(priv, err);
- if (err)
- goto error;
- /*
- * Ethdev pointer is still required as input since
- * the primary device is not accessible from the
- * secondary process.
- */
- eth_dev->rx_pkt_burst =
- priv_select_rx_function(priv, eth_dev);
- eth_dev->tx_pkt_burst =
- priv_select_tx_function(priv, eth_dev);
- continue;
- }
-
- DEBUG("using port %u (%08" PRIx32 ")", port, test);
-
- ctx = mlx5_glue->open_device(ibv_dev);
- if (ctx == NULL) {
- err = ENODEV;
- goto port_error;
+ }
+ if (!switch_info->representor)
+ rte_strlcpy(name, dpdk_dev->name, sizeof(name));
+ else
+ snprintf(name, sizeof(name), "%s_representor_%u",
+ dpdk_dev->name, switch_info->port_name);
+ DRV_LOG(DEBUG, "naming Ethernet device \"%s\"", name);
+ if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
+ eth_dev = rte_eth_dev_attach_secondary(name);
+ if (eth_dev == NULL) {
+ DRV_LOG(ERR, "can not attach rte ethdev");
+ rte_errno = ENOMEM;
+ err = rte_errno;
+ goto error;
}
-
- mlx5_glue->query_device_ex(ctx, NULL, &device_attr);
- /* Check port status. */
- err = mlx5_glue->query_port(ctx, port, &port_attr);
+ eth_dev->device = dpdk_dev;
+ eth_dev->dev_ops = &mlx5_dev_sec_ops;
+ err = mlx5_uar_init_secondary(eth_dev);
if (err) {
- ERROR("port query failed: %s", strerror(err));
- goto port_error;
+ err = rte_errno;
+ goto error;
}
-
- if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
- ERROR("port %d is not configured in Ethernet mode",
- port);
- err = EINVAL;
- goto port_error;
+ /* Receive command fd from primary process */
+ err = mlx5_socket_connect(eth_dev);
+ if (err < 0) {
+ err = rte_errno;
+ goto error;
}
-
- if (port_attr.state != IBV_PORT_ACTIVE)
- DEBUG("port %d is not active: \"%s\" (%d)",
- port, mlx5_glue->port_state_str(port_attr.state),
- port_attr.state);
-
- /* Allocate protection domain. */
- pd = mlx5_glue->alloc_pd(ctx);
- if (pd == NULL) {
- ERROR("PD allocation failure");
- err = ENOMEM;
- goto port_error;
+ /* Remap UAR for Tx queues. */
+ err = mlx5_tx_uar_remap(eth_dev, err);
+ if (err) {
+ err = rte_errno;
+ goto error;
}
-
- mlx5_dev[idx].ports |= test;
-
- /* from rte_ethdev.c */
- priv = rte_zmalloc("ethdev private structure",
- sizeof(*priv),
- RTE_CACHE_LINE_SIZE);
- if (priv == NULL) {
- ERROR("priv allocation failure");
- err = ENOMEM;
- goto port_error;
+ /*
+ * Ethdev pointer is still required as input since
+ * the primary device is not accessible from the
+ * secondary process.
+ */
+ eth_dev->rx_pkt_burst = mlx5_select_rx_function(eth_dev);
+ eth_dev->tx_pkt_burst = mlx5_select_tx_function(eth_dev);
+ claim_zero(mlx5_glue->close_device(ctx));
+ return eth_dev;
+ }
+ /* Check port status. */
+ err = mlx5_glue->query_port(ctx, 1, &port_attr);
+ if (err) {
+ DRV_LOG(ERR, "port query failed: %s", strerror(err));
+ goto error;
+ }
+ if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
+ DRV_LOG(ERR, "port is not configured in Ethernet mode");
+ err = EINVAL;
+ goto error;
+ }
+ if (port_attr.state != IBV_PORT_ACTIVE)
+ DRV_LOG(DEBUG, "port is not active: \"%s\" (%d)",
+ mlx5_glue->port_state_str(port_attr.state),
+ port_attr.state);
+ /* Allocate protection domain. */
+ pd = mlx5_glue->alloc_pd(ctx);
+ if (pd == NULL) {
+ DRV_LOG(ERR, "PD allocation failure");
+ err = ENOMEM;
+ goto error;
+ }
+ priv = rte_zmalloc("ethdev private structure",
+ sizeof(*priv),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ DRV_LOG(ERR, "priv allocation failure");
+ err = ENOMEM;
+ goto error;
+ }
+ priv->ctx = ctx;
+ strncpy(priv->ibdev_name, priv->ctx->device->name,
+ sizeof(priv->ibdev_name));
+ strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path,
+ sizeof(priv->ibdev_path));
+ priv->device_attr = attr;
+ priv->pd = pd;
+ priv->mtu = ETHER_MTU;
+#ifndef RTE_ARCH_64
+ /* Initialize UAR access locks for 32bit implementations. */
+ rte_spinlock_init(&priv->uar_lock_cq);
+ for (i = 0; i < MLX5_UAR_PAGE_NUM_MAX; i++)
+ rte_spinlock_init(&priv->uar_lock[i]);
+#endif
+ /* Some internal functions rely on Netlink sockets, open them now. */
+ priv->nl_socket_rdma = mlx5_nl_init(NETLINK_RDMA);
+ priv->nl_socket_route = mlx5_nl_init(NETLINK_ROUTE);
+ priv->nl_sn = 0;
+ priv->representor = !!switch_info->representor;
+ priv->domain_id = RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID;
+ priv->representor_id =
+ switch_info->representor ? switch_info->port_name : -1;
+ /*
+ * Look for sibling devices in order to reuse their switch domain
+ * if any, otherwise allocate one.
+ */
+ i = mlx5_dev_to_port_id(dpdk_dev, NULL, 0);
+ if (i > 0) {
+ uint16_t port_id[i];
+
+ i = RTE_MIN(mlx5_dev_to_port_id(dpdk_dev, port_id, i), i);
+ while (i--) {
+ const struct priv *opriv =
+ rte_eth_devices[port_id[i]].data->dev_private;
+
+ if (!opriv ||
+ opriv->domain_id ==
+ RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID)
+ continue;
+ priv->domain_id = opriv->domain_id;
+ break;
}
-
- priv->ctx = ctx;
- strncpy(priv->ibdev_path, priv->ctx->device->ibdev_path,
- sizeof(priv->ibdev_path));
- priv->device_attr = device_attr;
- priv->port = port;
- priv->pd = pd;
- priv->mtu = ETHER_MTU;
- err = mlx5_args(&config, pci_dev->device.devargs);
+ }
+ if (priv->domain_id == RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID) {
+ err = rte_eth_switch_domain_alloc(&priv->domain_id);
if (err) {
- ERROR("failed to process device arguments: %s",
- strerror(err));
- goto port_error;
+ err = rte_errno;
+ DRV_LOG(ERR, "unable to allocate switch domain: %s",
+ strerror(rte_errno));
+ goto error;
}
- if (mlx5_glue->query_device_ex(ctx, NULL, &device_attr_ex)) {
- ERROR("ibv_query_device_ex() failed");
- goto port_error;
- }
-
- config.hw_csum = !!(device_attr_ex.device_cap_flags_ex &
- IBV_DEVICE_RAW_IP_CSUM);
- DEBUG("checksum offloading is %ssupported",
- (config.hw_csum ? "" : "not "));
-
-#ifdef HAVE_IBV_DEVICE_VXLAN_SUPPORT
- config.hw_csum_l2tun =
- !!(exp_device_attr.exp_device_cap_flags &
- IBV_DEVICE_VXLAN_SUPPORT);
-#endif
- DEBUG("Rx L2 tunnel checksum offloads are %ssupported",
- (config.hw_csum_l2tun ? "" : "not "));
-
+ own_domain_id = 1;
+ }
+ err = mlx5_args(&config, dpdk_dev->devargs);
+ if (err) {
+ err = rte_errno;
+ DRV_LOG(ERR, "failed to process device arguments: %s",
+ strerror(rte_errno));
+ goto error;
+ }
+ config.hw_csum = !!(attr.device_cap_flags_ex & IBV_DEVICE_RAW_IP_CSUM);
+ DRV_LOG(DEBUG, "checksum offloading is %ssupported",
+ (config.hw_csum ? "" : "not "));
#ifdef HAVE_IBV_DEVICE_COUNTERS_SET_SUPPORT
- config.flow_counter_en = !!(device_attr.max_counter_sets);
- mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
- DEBUG("counter type = %d, num of cs = %ld, attributes = %d",
- cs_desc.counter_type, cs_desc.num_of_cs,
- cs_desc.attributes);
+ config.flow_counter_en = !!attr.max_counter_sets;
+ mlx5_glue->describe_counter_set(ctx, 0, &cs_desc);
+ DRV_LOG(DEBUG, "counter type = %d, num of cs = %ld, attributes = %d",
+ cs_desc.counter_type, cs_desc.num_of_cs,
+ cs_desc.attributes);
#endif
- config.ind_table_max_size =
- device_attr_ex.rss_caps.max_rwq_indirection_table_size;
- /* Remove this check once DPDK supports larger/variable
- * indirection tables. */
- if (config.ind_table_max_size >
- (unsigned int)ETH_RSS_RETA_SIZE_512)
- config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
- DEBUG("maximum RX indirection table size is %u",
- config.ind_table_max_size);
- config.hw_vlan_strip = !!(device_attr_ex.raw_packet_caps &
- IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
- DEBUG("VLAN stripping is %ssupported",
- (config.hw_vlan_strip ? "" : "not "));
-
- config.hw_fcs_strip = !!(device_attr_ex.raw_packet_caps &
- IBV_RAW_PACKET_CAP_SCATTER_FCS);
- DEBUG("FCS stripping configuration is %ssupported",
- (config.hw_fcs_strip ? "" : "not "));
-
+ config.ind_table_max_size =
+ attr.rss_caps.max_rwq_indirection_table_size;
+ /*
+ * Remove this check once DPDK supports larger/variable
+ * indirection tables.
+ */
+ if (config.ind_table_max_size > (unsigned int)ETH_RSS_RETA_SIZE_512)
+ config.ind_table_max_size = ETH_RSS_RETA_SIZE_512;
+ DRV_LOG(DEBUG, "maximum Rx indirection table size is %u",
+ config.ind_table_max_size);
+ config.hw_vlan_strip = !!(attr.raw_packet_caps &
+ IBV_RAW_PACKET_CAP_CVLAN_STRIPPING);
+ DRV_LOG(DEBUG, "VLAN stripping is %ssupported",
+ (config.hw_vlan_strip ? "" : "not "));
+ config.hw_fcs_strip = !!(attr.raw_packet_caps &
+ IBV_RAW_PACKET_CAP_SCATTER_FCS);
+ DRV_LOG(DEBUG, "FCS stripping configuration is %ssupported",
+ (config.hw_fcs_strip ? "" : "not "));
#ifdef HAVE_IBV_WQ_FLAG_RX_END_PADDING
- config.hw_padding = !!device_attr_ex.rx_pad_end_addr_align;
+ config.hw_padding = !!attr.rx_pad_end_addr_align;
#endif
- DEBUG("hardware RX end alignment padding is %ssupported",
- (config.hw_padding ? "" : "not "));
-
- priv_get_num_vfs(priv, &num_vfs);
- config.sriov = (num_vfs || sriov);
- config.tso = ((device_attr_ex.tso_caps.max_tso > 0) &&
- (device_attr_ex.tso_caps.supported_qpts &
- (1 << IBV_QPT_RAW_PACKET)));
- if (config.tso)
- config.tso_max_payload_sz =
- device_attr_ex.tso_caps.max_tso;
- if (config.mps && !mps) {
- ERROR("multi-packet send not supported on this device"
- " (" MLX5_TXQ_MPW_EN ")");
- err = ENOTSUP;
- goto port_error;
- }
- INFO("%sMPS is %s",
- config.mps == MLX5_MPW_ENHANCED ? "Enhanced " : "",
- config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
- if (config.cqe_comp && !cqe_comp) {
- WARN("Rx CQE compression isn't supported");
- config.cqe_comp = 0;
- }
- err = priv_uar_init_primary(priv);
- if (err)
- goto port_error;
- /* Configure the first MAC address by default. */
- if (priv_get_mac(priv, &mac.addr_bytes)) {
- ERROR("cannot get MAC address, is mlx5_en loaded?"
- " (errno: %s)", strerror(errno));
- err = ENODEV;
- goto port_error;
+ DRV_LOG(DEBUG, "hardware Rx end alignment padding is %ssupported",
+ (config.hw_padding ? "" : "not "));
+ config.tso = (attr.tso_caps.max_tso > 0 &&
+ (attr.tso_caps.supported_qpts &
+ (1 << IBV_QPT_RAW_PACKET)));
+ if (config.tso)
+ config.tso_max_payload_sz = attr.tso_caps.max_tso;
+ if (config.mps && !mps) {
+ DRV_LOG(ERR,
+ "multi-packet send not supported on this device"
+ " (" MLX5_TXQ_MPW_EN ")");
+ err = ENOTSUP;
+ goto error;
+ }
+ DRV_LOG(INFO, "%sMPS is %s",
+ config.mps == MLX5_MPW_ENHANCED ? "enhanced " : "",
+ config.mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
+ if (config.cqe_comp && !cqe_comp) {
+ DRV_LOG(WARNING, "Rx CQE compression isn't supported");
+ config.cqe_comp = 0;
+ }
+ if (config.mprq.enabled && mprq) {
+ if (config.mprq.stride_num_n > mprq_max_stride_num_n ||
+ config.mprq.stride_num_n < mprq_min_stride_num_n) {
+ config.mprq.stride_num_n =
+ RTE_MAX(MLX5_MPRQ_STRIDE_NUM_N,
+ mprq_min_stride_num_n);
+ DRV_LOG(WARNING,
+ "the number of strides"
+ " for Multi-Packet RQ is out of range,"
+ " setting default value (%u)",
+ 1 << config.mprq.stride_num_n);
}
- INFO("port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
- priv->port,
- mac.addr_bytes[0], mac.addr_bytes[1],
- mac.addr_bytes[2], mac.addr_bytes[3],
- mac.addr_bytes[4], mac.addr_bytes[5]);
+ config.mprq.min_stride_size_n = mprq_min_stride_size_n;
+ config.mprq.max_stride_size_n = mprq_max_stride_size_n;
+ } else if (config.mprq.enabled && !mprq) {
+ DRV_LOG(WARNING, "Multi-Packet RQ isn't supported");
+ config.mprq.enabled = 0;
+ }
+ eth_dev = rte_eth_dev_allocate(name);
+ if (eth_dev == NULL) {
+ DRV_LOG(ERR, "can not allocate rte ethdev");
+ err = ENOMEM;
+ goto error;
+ }
+ if (priv->representor)
+ eth_dev->data->dev_flags |= RTE_ETH_DEV_REPRESENTOR;
+ eth_dev->data->dev_private = priv;
+ priv->dev_data = eth_dev->data;
+ eth_dev->data->mac_addrs = priv->mac;
+ eth_dev->device = dpdk_dev;
+ eth_dev->device->driver = &mlx5_driver.driver;
+ err = mlx5_uar_init_primary(eth_dev);
+ if (err) {
+ err = rte_errno;
+ goto error;
+ }
+ /* Configure the first MAC address by default. */
+ if (mlx5_get_mac(eth_dev, &mac.addr_bytes)) {
+ DRV_LOG(ERR,
+ "port %u cannot get MAC address, is mlx5_en"
+ " loaded? (errno: %s)",
+ eth_dev->data->port_id, strerror(rte_errno));
+ err = ENODEV;
+ goto error;
+ }
+ DRV_LOG(INFO,
+ "port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ eth_dev->data->port_id,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
#ifndef NDEBUG
- {
- char ifname[IF_NAMESIZE];
-
- if (priv_get_ifname(priv, &ifname) == 0)
- DEBUG("port %u ifname is \"%s\"",
- priv->port, ifname);
- else
- DEBUG("port %u ifname is unknown", priv->port);
- }
+ {
+ char ifname[IF_NAMESIZE];
+
+ if (mlx5_get_ifname(eth_dev, &ifname) == 0)
+ DRV_LOG(DEBUG, "port %u ifname is \"%s\"",
+ eth_dev->data->port_id, ifname);
+ else
+ DRV_LOG(DEBUG, "port %u ifname is unknown",
+ eth_dev->data->port_id);
+ }
#endif
- /* Get actual MTU if possible. */
- priv_get_mtu(priv, &priv->mtu);
- DEBUG("port %u MTU is %u", priv->port, priv->mtu);
+ /* Get actual MTU if possible. */
+ err = mlx5_get_mtu(eth_dev, &priv->mtu);
+ if (err) {
+ err = rte_errno;
+ goto error;
+ }
+ DRV_LOG(DEBUG, "port %u MTU is %u", eth_dev->data->port_id,
+ priv->mtu);
+ /* Initialize burst functions to prevent crashes before link-up. */
+ eth_dev->rx_pkt_burst = removed_rx_burst;
+ eth_dev->tx_pkt_burst = removed_tx_burst;
+ eth_dev->dev_ops = &mlx5_dev_ops;
+ /* Register MAC address. */
+ claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
+ if (vf && config.vf_nl_en)
+ mlx5_nl_mac_addr_sync(eth_dev);
+ priv->mnl_socket = mlx5_nl_flow_socket_create();
+ if (!priv->mnl_socket) {
+ err = -rte_errno;
+ DRV_LOG(WARNING,
+ "flow rules relying on switch offloads will not be"
+ " supported: cannot open libmnl socket: %s",
+ strerror(rte_errno));
+ } else {
+ struct rte_flow_error error;
+ unsigned int ifindex = mlx5_ifindex(eth_dev);
- eth_dev = rte_eth_dev_allocate(name);
- if (eth_dev == NULL) {
- ERROR("can not allocate rte ethdev");
- err = ENOMEM;
- goto port_error;
+ if (!ifindex) {
+ err = -rte_errno;
+ error.message =
+ "cannot retrieve network interface index";
+ } else {
+ err = mlx5_nl_flow_init(priv->mnl_socket, ifindex,
+ &error);
+ }
+ if (err) {
+ DRV_LOG(WARNING,
+ "flow rules relying on switch offloads will"
+ " not be supported: %s: %s",
+ error.message, strerror(rte_errno));
+ mlx5_nl_flow_socket_destroy(priv->mnl_socket);
+ priv->mnl_socket = NULL;
}
- eth_dev->data->dev_private = priv;
- eth_dev->data->mac_addrs = priv->mac;
- eth_dev->device = &pci_dev->device;
- rte_eth_copy_pci_info(eth_dev, pci_dev);
- eth_dev->device->driver = &mlx5_driver.driver;
- /*
- * Initialize burst functions to prevent crashes before link-up.
- */
- eth_dev->rx_pkt_burst = removed_rx_burst;
- eth_dev->tx_pkt_burst = removed_tx_burst;
- priv->dev = eth_dev;
- eth_dev->dev_ops = &mlx5_dev_ops;
- /* Register MAC address. */
- claim_zero(mlx5_mac_addr_add(eth_dev, &mac, 0, 0));
- TAILQ_INIT(&priv->flows);
- TAILQ_INIT(&priv->ctrl_flows);
-
- /* Hint libmlx5 to use PMD allocator for data plane resources */
- struct mlx5dv_ctx_allocators alctr = {
- .alloc = &mlx5_alloc_verbs_buf,
- .free = &mlx5_free_verbs_buf,
- .data = priv,
- };
- mlx5_glue->dv_set_context_attr(ctx,
- MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
- (void *)((uintptr_t)&alctr));
-
- /* Bring Ethernet device up. */
- DEBUG("forcing Ethernet interface up");
- priv_set_flags(priv, ~IFF_UP, IFF_UP);
- /* Store device configuration on private structure. */
- priv->config = config;
- continue;
-
-port_error:
- if (priv)
- rte_free(priv);
- if (pd)
- claim_zero(mlx5_glue->dealloc_pd(pd));
- if (ctx)
- claim_zero(mlx5_glue->close_device(ctx));
- break;
}
-
+ TAILQ_INIT(&priv->flows);
+ TAILQ_INIT(&priv->ctrl_flows);
+ /* Hint libmlx5 to use PMD allocator for data plane resources */
+ struct mlx5dv_ctx_allocators alctr = {
+ .alloc = &mlx5_alloc_verbs_buf,
+ .free = &mlx5_free_verbs_buf,
+ .data = priv,
+ };
+ mlx5_glue->dv_set_context_attr(ctx, MLX5DV_CTX_ATTR_BUF_ALLOCATORS,
+ (void *)((uintptr_t)&alctr));
+ /* Bring Ethernet device up. */
+ DRV_LOG(DEBUG, "port %u forcing Ethernet interface up",
+ eth_dev->data->port_id);
+ mlx5_set_link_up(eth_dev);
/*
- * XXX if something went wrong in the loop above, there is a resource
- * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
- * long as the dpdk does not provide a way to deallocate a ethdev and a
- * way to enumerate the registered ethdevs to free the previous ones.
+ * Even though the interrupt handler is not installed yet,
+ * interrupts will still trigger on the asyn_fd from
+ * Verbs context returned by ibv_open_device().
*/
-
- /* no port found, complain */
- if (!mlx5_dev[idx].ports) {
- err = ENODEV;
+ mlx5_link_update(eth_dev, 0);
+ /* Store device configuration on private structure. */
+ priv->config = config;
+ /* Supported Verbs flow priority number detection. */
+ err = mlx5_flow_discover_priorities(eth_dev);
+ if (err < 0)
+ goto error;
+ priv->config.flow_prio = err;
+ /*
+ * Once the device is added to the list of memory event
+ * callback, its global MR cache table cannot be expanded
+ * on the fly because of deadlock. If it overflows, lookup
+ * should be done by searching MR list linearly, which is slow.
+ */
+ err = mlx5_mr_btree_init(&priv->mr.cache,
+ MLX5_MR_BTREE_CACHE_N * 2,
+ eth_dev->device->numa_node);
+ if (err) {
+ err = rte_errno;
goto error;
}
-
+ /* Add device to memory callback list. */
+ rte_rwlock_write_lock(&mlx5_shared_data->mem_event_rwlock);
+ LIST_INSERT_HEAD(&mlx5_shared_data->mem_event_cb_list,
+ priv, mem_event_cb);
+ rte_rwlock_write_unlock(&mlx5_shared_data->mem_event_rwlock);
+ return eth_dev;
error:
- if (attr_ctx)
- claim_zero(mlx5_glue->close_device(attr_ctx));
- if (list)
- mlx5_glue->free_device_list(list);
- assert(err >= 0);
- return -err;
+ if (priv) {
+ if (priv->nl_socket_route >= 0)
+ close(priv->nl_socket_route);
+ if (priv->nl_socket_rdma >= 0)
+ close(priv->nl_socket_rdma);
+ if (priv->mnl_socket)
+ mlx5_nl_flow_socket_destroy(priv->mnl_socket);
+ if (own_domain_id)
+ claim_zero(rte_eth_switch_domain_free(priv->domain_id));
+ rte_free(priv);
+ }
+ if (pd)
+ claim_zero(mlx5_glue->dealloc_pd(pd));
+ if (eth_dev)
+ rte_eth_dev_release_port(eth_dev);
+ if (ctx)
+ claim_zero(mlx5_glue->close_device(ctx));
+ assert(err > 0);
+ rte_errno = err;
+ return NULL;
+}
+
+/** Data associated with devices to spawn. */
+struct mlx5_dev_spawn_data {
+ unsigned int ifindex; /**< Network interface index. */
+ struct mlx5_switch_info info; /**< Switch information. */
+ struct ibv_device *ibv_dev; /**< Associated IB device. */
+ struct rte_eth_dev *eth_dev; /**< Associated Ethernet device. */
+};
+
+/**
+ * Comparison callback to sort device data.
+ *
+ * This is meant to be used with qsort().
+ *
+ * @param a[in]
+ * Pointer to pointer to first data object.
+ * @param b[in]
+ * Pointer to pointer to second data object.
+ *
+ * @return
+ * 0 if both objects are equal, less than 0 if the first argument is less
+ * than the second, greater than 0 otherwise.
+ */
+static int
+mlx5_dev_spawn_data_cmp(const void *a, const void *b)
+{
+ const struct mlx5_switch_info *si_a =
+ &((const struct mlx5_dev_spawn_data *)a)->info;
+ const struct mlx5_switch_info *si_b =
+ &((const struct mlx5_dev_spawn_data *)b)->info;
+ int ret;
+
+ /* Master device first. */
+ ret = si_b->master - si_a->master;
+ if (ret)
+ return ret;
+ /* Then representor devices. */
+ ret = si_b->representor - si_a->representor;
+ if (ret)
+ return ret;
+ /* Unidentified devices come last in no specific order. */
+ if (!si_a->representor)
+ return 0;
+ /* Order representors by name. */
+ return si_a->port_name - si_b->port_name;
+}
+
+/**
+ * DPDK callback to register a PCI device.
+ *
+ * This function spawns Ethernet devices out of a given PCI device.
+ *
+ * @param[in] pci_drv
+ * PCI driver structure (mlx5_driver).
+ * @param[in] pci_dev
+ * PCI device information.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+static int
+mlx5_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
+ struct rte_pci_device *pci_dev)
+{
+ struct ibv_device **ibv_list;
+ unsigned int n = 0;
+ int vf;
+ int ret;
+
+ assert(pci_drv == &mlx5_driver);
+ errno = 0;
+ ibv_list = mlx5_glue->get_device_list(&ret);
+ if (!ibv_list) {
+ rte_errno = errno ? errno : ENOSYS;
+ DRV_LOG(ERR, "cannot list devices, is ib_uverbs loaded?");
+ return -rte_errno;
+ }
+
+ struct ibv_device *ibv_match[ret + 1];
+
+ while (ret-- > 0) {
+ struct rte_pci_addr pci_addr;
+
+ DRV_LOG(DEBUG, "checking device \"%s\"", ibv_list[ret]->name);
+ if (mlx5_ibv_device_to_pci_addr(ibv_list[ret], &pci_addr))
+ continue;
+ if (pci_dev->addr.domain != pci_addr.domain ||
+ pci_dev->addr.bus != pci_addr.bus ||
+ pci_dev->addr.devid != pci_addr.devid ||
+ pci_dev->addr.function != pci_addr.function)
+ continue;
+ DRV_LOG(INFO, "PCI information matches for device \"%s\"",
+ ibv_list[ret]->name);
+ ibv_match[n++] = ibv_list[ret];
+ }
+ ibv_match[n] = NULL;
+
+ struct mlx5_dev_spawn_data list[n];
+ int nl_route = n ? mlx5_nl_init(NETLINK_ROUTE) : -1;
+ int nl_rdma = n ? mlx5_nl_init(NETLINK_RDMA) : -1;
+ unsigned int i;
+ unsigned int u;
+
+ /*
+ * The existence of several matching entries (n > 1) means port
+ * representors have been instantiated. No existing Verbs call nor
+ * /sys entries can tell them apart, this can only be done through
+ * Netlink calls assuming kernel drivers are recent enough to
+ * support them.
+ *
+ * In the event of identification failure through Netlink, try again
+ * through sysfs, then either:
+ *
+ * 1. No device matches (n == 0), complain and bail out.
+ * 2. A single IB device matches (n == 1) and is not a representor,
+ * assume no switch support.
+ * 3. Otherwise no safe assumptions can be made; complain louder and
+ * bail out.
+ */
+ for (i = 0; i != n; ++i) {
+ list[i].ibv_dev = ibv_match[i];
+ list[i].eth_dev = NULL;
+ if (nl_rdma < 0)
+ list[i].ifindex = 0;
+ else
+ list[i].ifindex = mlx5_nl_ifindex
+ (nl_rdma, list[i].ibv_dev->name);
+ if (nl_route < 0 ||
+ !list[i].ifindex ||
+ mlx5_nl_switch_info(nl_route, list[i].ifindex,
+ &list[i].info) ||
+ ((!list[i].info.representor && !list[i].info.master) &&
+ mlx5_sysfs_switch_info(list[i].ifindex, &list[i].info))) {
+ list[i].ifindex = 0;
+ memset(&list[i].info, 0, sizeof(list[i].info));
+ continue;
+ }
+ }
+ if (nl_rdma >= 0)
+ close(nl_rdma);
+ if (nl_route >= 0)
+ close(nl_route);
+ /* Count unidentified devices. */
+ for (u = 0, i = 0; i != n; ++i)
+ if (!list[i].info.master && !list[i].info.representor)
+ ++u;
+ if (u) {
+ if (n == 1 && u == 1) {
+ /* Case #2. */
+ DRV_LOG(INFO, "no switch support detected");
+ } else {
+ /* Case #3. */
+ DRV_LOG(ERR,
+ "unable to tell which of the matching devices"
+ " is the master (lack of kernel support?)");
+ n = 0;
+ }
+ }
+ /*
+ * Sort list to probe devices in natural order for users convenience
+ * (i.e. master first, then representors from lowest to highest ID).
+ */
+ if (n)
+ qsort(list, n, sizeof(*list), mlx5_dev_spawn_data_cmp);
+ switch (pci_dev->id.device_id) {
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX4LXVF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5VF:
+ case PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF:
+ vf = 1;
+ break;
+ default:
+ vf = 0;
+ }
+ for (i = 0; i != n; ++i) {
+ uint32_t restore;
+
+ list[i].eth_dev = mlx5_dev_spawn
+ (&pci_dev->device, list[i].ibv_dev, vf, &list[i].info);
+ if (!list[i].eth_dev) {
+ if (rte_errno != EBUSY)
+ break;
+ /* Device is disabled, ignore it. */
+ continue;
+ }
+ restore = list[i].eth_dev->data->dev_flags;
+ rte_eth_copy_pci_info(list[i].eth_dev, pci_dev);
+ /* Restore non-PCI flags cleared by the above call. */
+ list[i].eth_dev->data->dev_flags |= restore;
+ rte_eth_dev_probing_finish(list[i].eth_dev);
+ }
+ mlx5_glue->free_device_list(ibv_list);
+ if (!n) {
+ DRV_LOG(WARNING,
+ "no Verbs device matches PCI device " PCI_PRI_FMT ","
+ " are kernel drivers loaded?",
+ pci_dev->addr.domain, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function);
+ rte_errno = ENOENT;
+ ret = -rte_errno;
+ } else if (i != n) {
+ DRV_LOG(ERR,
+ "probe of PCI device " PCI_PRI_FMT " aborted after"
+ " encountering an error: %s",
+ pci_dev->addr.domain, pci_dev->addr.bus,
+ pci_dev->addr.devid, pci_dev->addr.function,
+ strerror(rte_errno));
+ ret = -rte_errno;
+ /* Roll back. */
+ while (i--) {
+ if (!list[i].eth_dev)
+ continue;
+ mlx5_dev_close(list[i].eth_dev);
+ if (rte_eal_process_type() == RTE_PROC_PRIMARY)
+ rte_free(list[i].eth_dev->data->dev_private);
+ claim_zero(rte_eth_dev_release_port(list[i].eth_dev));
+ }
+ /* Restore original error. */
+ rte_errno = -ret;
+ } else {
+ ret = 0;
+ }
+ return ret;
}
static const struct rte_pci_id mlx5_pci_id_map[] = {
RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
PCI_DEVICE_ID_MELLANOX_CONNECTX5EXVF)
},
+ {
+ RTE_PCI_DEVICE(PCI_VENDOR_ID_MELLANOX,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX5BF)
+ },
{
.vendor_id = 0
}
#ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
+/**
+ * Suffix RTE_EAL_PMD_PATH with "-glue".
+ *
+ * This function performs a sanity check on RTE_EAL_PMD_PATH before
+ * suffixing its last component.
+ *
+ * @param buf[out]
+ * Output buffer, should be large enough otherwise NULL is returned.
+ * @param size
+ * Size of @p out.
+ *
+ * @return
+ * Pointer to @p buf or @p NULL in case suffix cannot be appended.
+ */
+static char *
+mlx5_glue_path(char *buf, size_t size)
+{
+ static const char *const bad[] = { "/", ".", "..", NULL };
+ const char *path = RTE_EAL_PMD_PATH;
+ size_t len = strlen(path);
+ size_t off;
+ int i;
+
+ while (len && path[len - 1] == '/')
+ --len;
+ for (off = len; off && path[off - 1] != '/'; --off)
+ ;
+ for (i = 0; bad[i]; ++i)
+ if (!strncmp(path + off, bad[i], (int)(len - off)))
+ goto error;
+ i = snprintf(buf, size, "%.*s-glue", (int)len, path);
+ if (i == -1 || (size_t)i >= size)
+ goto error;
+ return buf;
+error:
+ DRV_LOG(ERR,
+ "unable to append \"-glue\" to last component of"
+ " RTE_EAL_PMD_PATH (\"" RTE_EAL_PMD_PATH "\"),"
+ " please re-configure DPDK");
+ return NULL;
+}
+
/**
* Initialization routine for run-time dependency on rdma-core.
*/
static int
mlx5_glue_init(void)
{
+ char glue_path[sizeof(RTE_EAL_PMD_PATH) - 1 + sizeof("-glue")];
const char *path[] = {
/*
* A basic security check is necessary before trusting
*/
(geteuid() == getuid() && getegid() == getgid() ?
getenv("MLX5_GLUE_PATH") : NULL),
- RTE_EAL_PMD_PATH,
+ /*
+ * When RTE_EAL_PMD_PATH is set, use its glue-suffixed
+ * variant, otherwise let dlopen() look up libraries on its
+ * own.
+ */
+ (*RTE_EAL_PMD_PATH ?
+ mlx5_glue_path(glue_path, sizeof(glue_path)) : ""),
};
unsigned int i = 0;
void *handle = NULL;
break;
if (sizeof(name) != (size_t)ret + 1)
continue;
- DEBUG("looking for rdma-core glue as \"%s\"", name);
+ DRV_LOG(DEBUG, "looking for rdma-core glue as \"%s\"",
+ name);
handle = dlopen(name, RTLD_LAZY);
break;
} while (1);
rte_errno = EINVAL;
dlmsg = dlerror();
if (dlmsg)
- WARN("cannot load glue library: %s", dlmsg);
+ DRV_LOG(WARNING, "cannot load glue library: %s", dlmsg);
goto glue_error;
}
sym = dlsym(handle, "mlx5_glue");
rte_errno = EINVAL;
dlmsg = dlerror();
if (dlmsg)
- ERROR("cannot resolve glue symbol: %s", dlmsg);
+ DRV_LOG(ERR, "cannot resolve glue symbol: %s", dlmsg);
goto glue_error;
}
mlx5_glue = *sym;
glue_error:
if (handle)
dlclose(handle);
- WARN("cannot initialize PMD due to missing run-time"
- " dependency on rdma-core libraries (libibverbs,"
- " libmlx5)");
+ DRV_LOG(WARNING,
+ "cannot initialize PMD due to missing run-time dependency on"
+ " rdma-core libraries (libibverbs, libmlx5)");
return -rte_errno;
}
/**
* Driver initialization routine.
*/
-RTE_INIT(rte_mlx5_pmd_init);
-static void
-rte_mlx5_pmd_init(void)
+RTE_INIT(rte_mlx5_pmd_init)
{
- /* Build the static table for ptype conversion. */
+ /* Initialize driver log type. */
+ mlx5_logtype = rte_log_register("pmd.net.mlx5");
+ if (mlx5_logtype >= 0)
+ rte_log_set_level(mlx5_logtype, RTE_LOG_NOTICE);
+
+ /* Build the static tables for Verbs conversion. */
mlx5_set_ptype_table();
+ mlx5_set_cksum_table();
+ mlx5_set_swp_types_table();
/*
* RDMAV_HUGEPAGES_SAFE tells ibv_fork_init() we intend to use
* huge pages. Calling ibv_fork_init() during init allows
/* Match the size of Rx completion entry to the size of a cacheline. */
if (RTE_CACHE_LINE_SIZE == 128)
setenv("MLX5_CQE_SIZE", "128", 0);
+ /*
+ * MLX5_DEVICE_FATAL_CLEANUP tells ibv_destroy functions to
+ * cleanup all the Verbs resources even when the device was removed.
+ */
+ setenv("MLX5_DEVICE_FATAL_CLEANUP", "1", 1);
#ifdef RTE_LIBRTE_MLX5_DLOPEN_DEPS
if (mlx5_glue_init())
return;
}
#endif
if (strcmp(mlx5_glue->version, MLX5_GLUE_VERSION)) {
- ERROR("rdma-core glue \"%s\" mismatch: \"%s\" is required",
- mlx5_glue->version, MLX5_GLUE_VERSION);
+ DRV_LOG(ERR,
+ "rdma-core glue \"%s\" mismatch: \"%s\" is required",
+ mlx5_glue->version, MLX5_GLUE_VERSION);
return;
}
mlx5_glue->fork_init();
Code Review / deb_dpdk.git / blobdiff