--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Marvell International Ltd.
+ * Copyright(c) 2017 Semihalf.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_cfgfile.h>
+#include <rte_log.h>
+#include <rte_lcore.h>
+#include <rte_malloc.h>
+#include <rte_string_fns.h>
+
+/* Unluckily, container_of is defined by both DPDK and MUSDK,
+ * we'll declare only one version.
+ *
+ * Note that it is not used in this PMD anyway.
+ */
+#ifdef container_of
+#undef container_of
+#endif
+
+#include "mrvl_qos.h"
+
+/* Parsing tokens. Defined conveniently, so that any correction is easy. */
+#define MRVL_TOK_DEFAULT "default"
+#define MRVL_TOK_DEFAULT_TC "default_tc"
+#define MRVL_TOK_DSCP "dscp"
+#define MRVL_TOK_MAPPING_PRIORITY "mapping_priority"
+#define MRVL_TOK_IP "ip"
+#define MRVL_TOK_IP_VLAN "ip/vlan"
+#define MRVL_TOK_PCP "pcp"
+#define MRVL_TOK_PORT "port"
+#define MRVL_TOK_RXQ "rxq"
+#define MRVL_TOK_SP "SP"
+#define MRVL_TOK_TC "tc"
+#define MRVL_TOK_TXQ "txq"
+#define MRVL_TOK_VLAN "vlan"
+#define MRVL_TOK_VLAN_IP "vlan/ip"
+#define MRVL_TOK_WEIGHT "weight"
+
+/** Number of tokens in range a-b = 2. */
+#define MAX_RNG_TOKENS 2
+
+/** Maximum possible value of PCP. */
+#define MAX_PCP 7
+
+/** Maximum possible value of DSCP. */
+#define MAX_DSCP 63
+
+/** Global QoS configuration. */
+struct mrvl_qos_cfg *mrvl_qos_cfg;
+
+/**
+ * Convert string to uint32_t with extra checks for result correctness.
+ *
+ * @param string String to convert.
+ * @param val Conversion result.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+get_val_securely(const char *string, uint32_t *val)
+{
+ char *endptr;
+ size_t len = strlen(string);
+
+ if (len == 0)
+ return -1;
+
+ errno = 0;
+ *val = strtoul(string, &endptr, 0);
+ if (errno != 0 || RTE_PTR_DIFF(endptr, string) != len)
+ return -2;
+
+ return 0;
+}
+
+/**
+ * Read out-queue configuration from file.
+ *
+ * @param file Path to the configuration file.
+ * @param port Port number.
+ * @param outq Out queue number.
+ * @param cfg Pointer to the Marvell QoS configuration structure.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+get_outq_cfg(struct rte_cfgfile *file, int port, int outq,
+ struct mrvl_qos_cfg *cfg)
+{
+ char sec_name[32];
+ const char *entry;
+ uint32_t val;
+
+ snprintf(sec_name, sizeof(sec_name), "%s %d %s %d",
+ MRVL_TOK_PORT, port, MRVL_TOK_TXQ, outq);
+
+ /* Skip non-existing */
+ if (rte_cfgfile_num_sections(file, sec_name, strlen(sec_name)) <= 0)
+ return 0;
+
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_WEIGHT);
+ if (entry) {
+ if (get_val_securely(entry, &val) < 0)
+ return -1;
+ cfg->port[port].outq[outq].weight = (uint8_t)val;
+ }
+
+ return 0;
+}
+
+/**
+ * Gets multiple-entry values and places them in table.
+ *
+ * Entry can be anything, e.g. "1 2-3 5 6 7-9". This needs to be converted to
+ * table entries, respectively: {1, 2, 3, 5, 6, 7, 8, 9}.
+ * As all result table's elements are always 1-byte long, we
+ * won't overcomplicate the function, but we'll keep API generic,
+ * check if someone hasn't changed element size and make it simple
+ * to extend to other sizes.
+ *
+ * This function is purely utilitary, it does not print any error, only returns
+ * different error numbers.
+ *
+ * @param entry[in] Values string to parse.
+ * @param tab[out] Results table.
+ * @param elem_sz[in] Element size (in bytes).
+ * @param max_elems[in] Number of results table elements available.
+ * @param max val[in] Maximum value allowed.
+ * @returns Number of correctly parsed elements in case of success.
+ * @retval -1 Wrong element size.
+ * @retval -2 More tokens than result table allows.
+ * @retval -3 Wrong range syntax.
+ * @retval -4 Wrong range values.
+ * @retval -5 Maximum value exceeded.
+ */
+static int
+get_entry_values(const char *entry, uint8_t *tab,
+ size_t elem_sz, uint8_t max_elems, uint8_t max_val)
+{
+ /* There should not be more tokens than max elements.
+ * Add 1 for error trap.
+ */
+ char *tokens[max_elems + 1];
+
+ /* Begin, End + error trap = 3. */
+ char *rng_tokens[MAX_RNG_TOKENS + 1];
+ long beg, end;
+ uint32_t token_val;
+ int nb_tokens, nb_rng_tokens;
+ int i;
+ int values = 0;
+ char val;
+ char entry_cpy[CFG_VALUE_LEN];
+
+ if (elem_sz != 1)
+ return -1;
+
+ /* Copy the entry to safely use rte_strsplit(). */
+ snprintf(entry_cpy, RTE_DIM(entry_cpy), "%s", entry);
+
+ /*
+ * If there are more tokens than array size, rte_strsplit will
+ * not return error, just array size.
+ */
+ nb_tokens = rte_strsplit(entry_cpy, strlen(entry_cpy),
+ tokens, max_elems + 1, ' ');
+
+ /* Quick check, will be refined later. */
+ if (nb_tokens > max_elems)
+ return -2;
+
+ for (i = 0; i < nb_tokens; ++i) {
+ if (strchr(tokens[i], '-') != NULL) {
+ /*
+ * Split to begin and end tokens.
+ * We want to catch error cases too, thus we leave
+ * option for number of tokens to be more than 2.
+ */
+ nb_rng_tokens = rte_strsplit(tokens[i],
+ strlen(tokens[i]), rng_tokens,
+ RTE_DIM(rng_tokens), '-');
+ if (nb_rng_tokens != 2)
+ return -3;
+
+ /* Range and sanity checks. */
+ if (get_val_securely(rng_tokens[0], &token_val) < 0)
+ return -4;
+ beg = (char)token_val;
+ if (get_val_securely(rng_tokens[1], &token_val) < 0)
+ return -4;
+ end = (char)token_val;
+ if (beg < 0 || beg > UCHAR_MAX ||
+ end < 0 || end > UCHAR_MAX || end < beg)
+ return -4;
+
+ for (val = beg; val <= end; ++val) {
+ if (val > max_val)
+ return -5;
+
+ *tab = val;
+ tab = RTE_PTR_ADD(tab, elem_sz);
+ ++values;
+ if (values >= max_elems)
+ return -2;
+ }
+ } else {
+ /* Single values. */
+ if (get_val_securely(tokens[i], &token_val) < 0)
+ return -5;
+ val = (char)token_val;
+ if (val > max_val)
+ return -5;
+
+ *tab = val;
+ tab = RTE_PTR_ADD(tab, elem_sz);
+ ++values;
+ if (values >= max_elems)
+ return -2;
+ }
+ }
+
+ return values;
+}
+
+/**
+ * Parse Traffic Class'es mapping configuration.
+ *
+ * @param file Config file handle.
+ * @param port Which port to look for.
+ * @param tc Which Traffic Class to look for.
+ * @param cfg[out] Parsing results.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+static int
+parse_tc_cfg(struct rte_cfgfile *file, int port, int tc,
+ struct mrvl_qos_cfg *cfg)
+{
+ char sec_name[32];
+ const char *entry;
+ int n;
+
+ snprintf(sec_name, sizeof(sec_name), "%s %d %s %d",
+ MRVL_TOK_PORT, port, MRVL_TOK_TC, tc);
+
+ /* Skip non-existing */
+ if (rte_cfgfile_num_sections(file, sec_name, strlen(sec_name)) <= 0)
+ return 0;
+
+ entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_RXQ);
+ if (entry) {
+ n = get_entry_values(entry,
+ cfg->port[port].tc[tc].inq,
+ sizeof(cfg->port[port].tc[tc].inq[0]),
+ RTE_DIM(cfg->port[port].tc[tc].inq),
+ MRVL_PP2_RXQ_MAX);
+ if (n < 0) {
+ RTE_LOG(ERR, PMD, "Error %d while parsing: %s\n",
+ n, entry);
+ return n;
+ }
+ cfg->port[port].tc[tc].inqs = n;
+ }
+
+ entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_PCP);
+ if (entry) {
+ n = get_entry_values(entry,
+ cfg->port[port].tc[tc].pcp,
+ sizeof(cfg->port[port].tc[tc].pcp[0]),
+ RTE_DIM(cfg->port[port].tc[tc].pcp),
+ MAX_PCP);
+ if (n < 0) {
+ RTE_LOG(ERR, PMD, "Error %d while parsing: %s\n",
+ n, entry);
+ return n;
+ }
+ cfg->port[port].tc[tc].pcps = n;
+ }
+
+ entry = rte_cfgfile_get_entry(file, sec_name, MRVL_TOK_DSCP);
+ if (entry) {
+ n = get_entry_values(entry,
+ cfg->port[port].tc[tc].dscp,
+ sizeof(cfg->port[port].tc[tc].dscp[0]),
+ RTE_DIM(cfg->port[port].tc[tc].dscp),
+ MAX_DSCP);
+ if (n < 0) {
+ RTE_LOG(ERR, PMD, "Error %d while parsing: %s\n",
+ n, entry);
+ return n;
+ }
+ cfg->port[port].tc[tc].dscps = n;
+ }
+ return 0;
+}
+
+/**
+ * Parse QoS configuration - rte_kvargs_process handler.
+ *
+ * Opens configuration file and parses its content.
+ *
+ * @param key Unused.
+ * @param path Path to config file.
+ * @param extra_args Pointer to configuration structure.
+ * @returns 0 in case of success, exits otherwise.
+ */
+int
+mrvl_get_qoscfg(const char *key __rte_unused, const char *path,
+ void *extra_args)
+{
+ struct mrvl_qos_cfg **cfg = extra_args;
+ struct rte_cfgfile *file = rte_cfgfile_load(path, 0);
+ uint32_t val;
+ int n, i, ret;
+ const char *entry;
+ char sec_name[32];
+
+ if (file == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot load configuration %s\n", path);
+
+ /* Create configuration. This is never accessed on the fast path,
+ * so we can ignore socket.
+ */
+ *cfg = rte_zmalloc("mrvl_qos_cfg", sizeof(struct mrvl_qos_cfg), 0);
+ if (*cfg == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot allocate configuration %s\n",
+ path);
+
+ n = rte_cfgfile_num_sections(file, MRVL_TOK_PORT,
+ sizeof(MRVL_TOK_PORT) - 1);
+
+ if (n == 0) {
+ /* This is weird, but not bad. */
+ RTE_LOG(WARNING, PMD, "Empty configuration file?\n");
+ return 0;
+ }
+
+ /* Use the number of ports given as vdev parameters. */
+ for (n = 0; n < mrvl_ports_nb; ++n) {
+ snprintf(sec_name, sizeof(sec_name), "%s %d %s",
+ MRVL_TOK_PORT, n, MRVL_TOK_DEFAULT);
+
+ /* Skip ports non-existing in configuration. */
+ if (rte_cfgfile_num_sections(file, sec_name,
+ strlen(sec_name)) <= 0) {
+ (*cfg)->port[n].use_global_defaults = 1;
+ (*cfg)->port[n].mapping_priority =
+ PP2_CLS_QOS_TBL_VLAN_IP_PRI;
+ continue;
+ }
+
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_DEFAULT_TC);
+ if (entry) {
+ if (get_val_securely(entry, &val) < 0 ||
+ val > USHRT_MAX)
+ return -1;
+ (*cfg)->port[n].default_tc = (uint8_t)val;
+ } else {
+ RTE_LOG(ERR, PMD,
+ "Default Traffic Class required in custom configuration!\n");
+ return -1;
+ }
+
+ entry = rte_cfgfile_get_entry(file, sec_name,
+ MRVL_TOK_MAPPING_PRIORITY);
+ if (entry) {
+ if (!strncmp(entry, MRVL_TOK_VLAN_IP,
+ sizeof(MRVL_TOK_VLAN_IP)))
+ (*cfg)->port[n].mapping_priority =
+ PP2_CLS_QOS_TBL_VLAN_IP_PRI;
+ else if (!strncmp(entry, MRVL_TOK_IP_VLAN,
+ sizeof(MRVL_TOK_IP_VLAN)))
+ (*cfg)->port[n].mapping_priority =
+ PP2_CLS_QOS_TBL_IP_VLAN_PRI;
+ else if (!strncmp(entry, MRVL_TOK_IP,
+ sizeof(MRVL_TOK_IP)))
+ (*cfg)->port[n].mapping_priority =
+ PP2_CLS_QOS_TBL_IP_PRI;
+ else if (!strncmp(entry, MRVL_TOK_VLAN,
+ sizeof(MRVL_TOK_VLAN)))
+ (*cfg)->port[n].mapping_priority =
+ PP2_CLS_QOS_TBL_VLAN_PRI;
+ else
+ rte_exit(EXIT_FAILURE,
+ "Error in parsing %s value (%s)!\n",
+ MRVL_TOK_MAPPING_PRIORITY, entry);
+ } else {
+ (*cfg)->port[n].mapping_priority =
+ PP2_CLS_QOS_TBL_VLAN_IP_PRI;
+ }
+
+ for (i = 0; i < MRVL_PP2_RXQ_MAX; ++i) {
+ ret = get_outq_cfg(file, n, i, *cfg);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Error %d parsing port %d outq %d!\n",
+ ret, n, i);
+ }
+
+ for (i = 0; i < MRVL_PP2_TC_MAX; ++i) {
+ ret = parse_tc_cfg(file, n, i, *cfg);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Error %d parsing port %d tc %d!\n",
+ ret, n, i);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * Setup Traffic Class.
+ *
+ * Fill in TC parameters in single MUSDK TC config entry.
+ * @param param TC parameters entry.
+ * @param inqs Number of MUSDK in-queues in this TC.
+ * @param bpool Bpool for this TC.
+ * @returns 0 in case of success, exits otherwise.
+ */
+static int
+setup_tc(struct pp2_ppio_tc_params *param, uint8_t inqs,
+ struct pp2_bpool *bpool)
+{
+ struct pp2_ppio_inq_params *inq_params;
+
+ param->pkt_offset = MRVL_PKT_OFFS;
+ param->pools[0] = bpool;
+
+ inq_params = rte_zmalloc_socket("inq_params",
+ inqs * sizeof(*inq_params),
+ 0, rte_socket_id());
+ if (!inq_params)
+ return -ENOMEM;
+
+ param->num_in_qs = inqs;
+
+ /* Release old config if necessary. */
+ if (param->inqs_params)
+ rte_free(param->inqs_params);
+
+ param->inqs_params = inq_params;
+
+ return 0;
+}
+
+/**
+ * Configure RX Queues in a given port.
+ *
+ * Sets up RX queues, their Traffic Classes and DPDK rxq->(TC,inq) mapping.
+ *
+ * @param priv Port's private data
+ * @param portid DPDK port ID
+ * @param max_queues Maximum number of queues to configure.
+ * @returns 0 in case of success, negative value otherwise.
+ */
+int
+mrvl_configure_rxqs(struct mrvl_priv *priv, uint16_t portid,
+ uint16_t max_queues)
+{
+ size_t i, tc;
+
+ if (mrvl_qos_cfg == NULL ||
+ mrvl_qos_cfg->port[portid].use_global_defaults) {
+ /* No port configuration, use default: 1 TC, no QoS. */
+ priv->ppio_params.inqs_params.num_tcs = 1;
+ setup_tc(&priv->ppio_params.inqs_params.tcs_params[0],
+ max_queues, priv->bpool);
+
+ /* Direct mapping of queues i.e. 0->0, 1->1 etc. */
+ for (i = 0; i < max_queues; ++i) {
+ priv->rxq_map[i].tc = 0;
+ priv->rxq_map[i].inq = i;
+ }
+ return 0;
+ }
+
+ /* We need only a subset of configuration. */
+ struct port_cfg *port_cfg = &mrvl_qos_cfg->port[portid];
+
+ priv->qos_tbl_params.type = port_cfg->mapping_priority;
+
+ /*
+ * We need to reverse mapping, from tc->pcp (better from usability
+ * point of view) to pcp->tc (configurable in MUSDK).
+ * First, set all map elements to "default".
+ */
+ for (i = 0; i < RTE_DIM(priv->qos_tbl_params.pcp_cos_map); ++i)
+ priv->qos_tbl_params.pcp_cos_map[i].tc = port_cfg->default_tc;
+
+ /* Then, fill in all known values. */
+ for (tc = 0; tc < RTE_DIM(port_cfg->tc); ++tc) {
+ if (port_cfg->tc[tc].pcps > RTE_DIM(port_cfg->tc[0].pcp)) {
+ /* Better safe than sorry. */
+ RTE_LOG(ERR, PMD,
+ "Too many PCPs configured in TC %zu!\n", tc);
+ return -1;
+ }
+ for (i = 0; i < port_cfg->tc[tc].pcps; ++i) {
+ priv->qos_tbl_params.pcp_cos_map[
+ port_cfg->tc[tc].pcp[i]].tc = tc;
+ }
+ }
+
+ /*
+ * The same logic goes with DSCP.
+ * First, set all map elements to "default".
+ */
+ for (i = 0; i < RTE_DIM(priv->qos_tbl_params.dscp_cos_map); ++i)
+ priv->qos_tbl_params.dscp_cos_map[i].tc =
+ port_cfg->default_tc;
+
+ /* Fill in all known values. */
+ for (tc = 0; tc < RTE_DIM(port_cfg->tc); ++tc) {
+ if (port_cfg->tc[tc].dscps > RTE_DIM(port_cfg->tc[0].dscp)) {
+ /* Better safe than sorry. */
+ RTE_LOG(ERR, PMD,
+ "Too many DSCPs configured in TC %zu!\n", tc);
+ return -1;
+ }
+ for (i = 0; i < port_cfg->tc[tc].dscps; ++i) {
+ priv->qos_tbl_params.dscp_cos_map[
+ port_cfg->tc[tc].dscp[i]].tc = tc;
+ }
+ }
+
+ /*
+ * Surprisingly, similar logic goes with queue mapping.
+ * We need only to store qid->tc mapping,
+ * to know TC when queue is read.
+ */
+ for (i = 0; i < RTE_DIM(priv->rxq_map); ++i)
+ priv->rxq_map[i].tc = MRVL_UNKNOWN_TC;
+
+ /* Set up DPDKq->(TC,inq) mapping. */
+ for (tc = 0; tc < RTE_DIM(port_cfg->tc); ++tc) {
+ if (port_cfg->tc[tc].inqs > RTE_DIM(port_cfg->tc[0].inq)) {
+ /* Overflow. */
+ RTE_LOG(ERR, PMD,
+ "Too many RX queues configured per TC %zu!\n",
+ tc);
+ return -1;
+ }
+ for (i = 0; i < port_cfg->tc[tc].inqs; ++i) {
+ uint8_t idx = port_cfg->tc[tc].inq[i];
+
+ if (idx > RTE_DIM(priv->rxq_map)) {
+ RTE_LOG(ERR, PMD, "Bad queue index %d!\n", idx);
+ return -1;
+ }
+
+ priv->rxq_map[idx].tc = tc;
+ priv->rxq_map[idx].inq = i;
+ }
+ }
+
+ /*
+ * Set up TC configuration. TCs need to be sequenced: 0, 1, 2
+ * with no gaps. Empty TC means end of processing.
+ */
+ for (i = 0; i < MRVL_PP2_TC_MAX; ++i) {
+ if (port_cfg->tc[i].inqs == 0)
+ break;
+ setup_tc(&priv->ppio_params.inqs_params.tcs_params[i],
+ port_cfg->tc[i].inqs,
+ priv->bpool);
+ }
+
+ priv->ppio_params.inqs_params.num_tcs = i;
+
+ return 0;
+}
+
+/**
+ * Start QoS mapping.
+ *
+ * Finalize QoS table configuration and initialize it in SDK. It can be done
+ * only after port is started, so we have a valid ppio reference.
+ *
+ * @param priv Port's private (configuration) data.
+ * @returns 0 in case of success, exits otherwise.
+ */
+int
+mrvl_start_qos_mapping(struct mrvl_priv *priv)
+{
+ size_t i;
+
+ if (priv->ppio == NULL) {
+ RTE_LOG(ERR, PMD, "ppio must not be NULL here!\n");
+ return -1;
+ }
+
+ for (i = 0; i < RTE_DIM(priv->qos_tbl_params.pcp_cos_map); ++i)
+ priv->qos_tbl_params.pcp_cos_map[i].ppio = priv->ppio;
+
+ for (i = 0; i < RTE_DIM(priv->qos_tbl_params.dscp_cos_map); ++i)
+ priv->qos_tbl_params.dscp_cos_map[i].ppio = priv->ppio;
+
+ /* Initialize Classifier QoS table. */
+
+ return pp2_cls_qos_tbl_init(&priv->qos_tbl_params, &priv->qos_tbl);
+}
Code Review / deb_dpdk.git / blobdiff