--- /dev/null
+/*
+ * Copyright (c) 2016 QLogic Corporation.
+ * All rights reserved.
+ * www.qlogic.com
+ *
+ * See LICENSE.qede_pmd for copyright and licensing details.
+ */
+
+#ifndef __ECORE_DEV_API_H__
+#define __ECORE_DEV_API_H__
+
+#include "ecore_status.h"
+#include "ecore_chain.h"
+#include "ecore_int_api.h"
+
+struct ecore_tunn_start_params;
+
+/**
+ * @brief ecore_init_dp - initialize the debug level
+ *
+ * @param p_dev
+ * @param dp_module
+ * @param dp_level
+ * @param dp_ctx
+ */
+void ecore_init_dp(struct ecore_dev *p_dev,
+ u32 dp_module, u8 dp_level, void *dp_ctx);
+
+/**
+ * @brief ecore_init_struct - initialize the device structure to
+ * its defaults
+ *
+ * @param p_dev
+ */
+void ecore_init_struct(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_resc_free -
+ *
+ * @param p_dev
+ */
+void ecore_resc_free(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_resc_alloc -
+ *
+ * @param p_dev
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_resc_alloc(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_resc_setup -
+ *
+ * @param p_dev
+ */
+void ecore_resc_setup(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_hw_init -
+ *
+ * @param p_dev
+ * @param p_tunn - tunneling parameters
+ * @param b_hw_start
+ * @param int_mode - interrupt mode [msix, inta, etc.] to use.
+ * @param allow_npar_tx_switch - npar tx switching to be used
+ * for vports configured for tx-switching.
+ * @param bin_fw_data - binary fw data pointer in binary fw file.
+ * Pass NULL if not using binary fw file.
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_hw_init(struct ecore_dev *p_dev,
+ struct ecore_tunn_start_params *p_tunn,
+ bool b_hw_start,
+ enum ecore_int_mode int_mode,
+ bool allow_npar_tx_switch,
+ const u8 *bin_fw_data);
+
+/**
+ * @brief ecore_hw_timers_stop_all -
+ *
+ * @param p_dev
+ *
+ * @return void
+ */
+void ecore_hw_timers_stop_all(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_hw_stop -
+ *
+ * @param p_dev
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_hw_stop(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_hw_stop_fastpath -should be called incase
+ * slowpath is still required for the device, but
+ * fastpath is not.
+ *
+ * @param p_dev
+ *
+ */
+void ecore_hw_stop_fastpath(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_prepare_hibernate -should be called when
+ * the system is going into the hibernate state
+ *
+ * @param p_dev
+ *
+ */
+void ecore_prepare_hibernate(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_hw_start_fastpath -restart fastpath traffic,
+ * only if hw_stop_fastpath was called
+
+ * @param p_dev
+ *
+ */
+void ecore_hw_start_fastpath(struct ecore_hwfn *p_hwfn);
+
+/**
+ * @brief ecore_hw_reset -
+ *
+ * @param p_dev
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_hw_reset(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_hw_prepare -
+ *
+ * @param p_dev
+ * @param personality - personality to initialize
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_hw_prepare(struct ecore_dev *p_dev, int personality);
+
+/**
+ * @brief ecore_hw_remove -
+ *
+ * @param p_dev
+ */
+void ecore_hw_remove(struct ecore_dev *p_dev);
+
+/**
+ * @brief ecore_ptt_acquire - Allocate a PTT window
+ *
+ * Should be called at the entry point to the driver (at the beginning of an
+ * exported function)
+ *
+ * @param p_hwfn
+ *
+ * @return struct ecore_ptt
+ */
+struct ecore_ptt *ecore_ptt_acquire(struct ecore_hwfn *p_hwfn);
+
+/**
+ * @brief ecore_ptt_release - Release PTT Window
+ *
+ * Should be called at the end of a flow - at the end of the function that
+ * acquired the PTT.
+ *
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ */
+void ecore_ptt_release(struct ecore_hwfn *p_hwfn, struct ecore_ptt *p_ptt);
+
+#ifndef __EXTRACT__LINUX__
+struct ecore_eth_stats {
+ u64 no_buff_discards;
+ u64 packet_too_big_discard;
+ u64 ttl0_discard;
+ u64 rx_ucast_bytes;
+ u64 rx_mcast_bytes;
+ u64 rx_bcast_bytes;
+ u64 rx_ucast_pkts;
+ u64 rx_mcast_pkts;
+ u64 rx_bcast_pkts;
+ u64 mftag_filter_discards;
+ u64 mac_filter_discards;
+ u64 tx_ucast_bytes;
+ u64 tx_mcast_bytes;
+ u64 tx_bcast_bytes;
+ u64 tx_ucast_pkts;
+ u64 tx_mcast_pkts;
+ u64 tx_bcast_pkts;
+ u64 tx_err_drop_pkts;
+ u64 tpa_coalesced_pkts;
+ u64 tpa_coalesced_events;
+ u64 tpa_aborts_num;
+ u64 tpa_not_coalesced_pkts;
+ u64 tpa_coalesced_bytes;
+
+ /* port */
+ u64 rx_64_byte_packets;
+ u64 rx_65_to_127_byte_packets;
+ u64 rx_128_to_255_byte_packets;
+ u64 rx_256_to_511_byte_packets;
+ u64 rx_512_to_1023_byte_packets;
+ u64 rx_1024_to_1518_byte_packets;
+ u64 rx_1519_to_1522_byte_packets;
+ u64 rx_1519_to_2047_byte_packets;
+ u64 rx_2048_to_4095_byte_packets;
+ u64 rx_4096_to_9216_byte_packets;
+ u64 rx_9217_to_16383_byte_packets;
+ u64 rx_crc_errors;
+ u64 rx_mac_crtl_frames;
+ u64 rx_pause_frames;
+ u64 rx_pfc_frames;
+ u64 rx_align_errors;
+ u64 rx_carrier_errors;
+ u64 rx_oversize_packets;
+ u64 rx_jabbers;
+ u64 rx_undersize_packets;
+ u64 rx_fragments;
+ u64 tx_64_byte_packets;
+ u64 tx_65_to_127_byte_packets;
+ u64 tx_128_to_255_byte_packets;
+ u64 tx_256_to_511_byte_packets;
+ u64 tx_512_to_1023_byte_packets;
+ u64 tx_1024_to_1518_byte_packets;
+ u64 tx_1519_to_2047_byte_packets;
+ u64 tx_2048_to_4095_byte_packets;
+ u64 tx_4096_to_9216_byte_packets;
+ u64 tx_9217_to_16383_byte_packets;
+ u64 tx_pause_frames;
+ u64 tx_pfc_frames;
+ u64 tx_lpi_entry_count;
+ u64 tx_total_collisions;
+ u64 brb_truncates;
+ u64 brb_discards;
+ u64 rx_mac_bytes;
+ u64 rx_mac_uc_packets;
+ u64 rx_mac_mc_packets;
+ u64 rx_mac_bc_packets;
+ u64 rx_mac_frames_ok;
+ u64 tx_mac_bytes;
+ u64 tx_mac_uc_packets;
+ u64 tx_mac_mc_packets;
+ u64 tx_mac_bc_packets;
+ u64 tx_mac_ctrl_frames;
+};
+#endif
+
+enum ecore_dmae_address_type_t {
+ ECORE_DMAE_ADDRESS_HOST_VIRT,
+ ECORE_DMAE_ADDRESS_HOST_PHYS,
+ ECORE_DMAE_ADDRESS_GRC
+};
+
+/* value of flags If ECORE_DMAE_FLAG_RW_REPL_SRC flag is set and the
+ * source is a block of length DMAE_MAX_RW_SIZE and the
+ * destination is larger, the source block will be duplicated as
+ * many times as required to fill the destination block. This is
+ * used mostly to write a zeroed buffer to destination address
+ * using DMA
+ */
+#define ECORE_DMAE_FLAG_RW_REPL_SRC 0x00000001
+#define ECORE_DMAE_FLAG_VF_SRC 0x00000002
+#define ECORE_DMAE_FLAG_VF_DST 0x00000004
+#define ECORE_DMAE_FLAG_COMPLETION_DST 0x00000008
+
+struct ecore_dmae_params {
+ u32 flags; /* consists of ECORE_DMAE_FLAG_* values */
+ u8 src_vfid;
+ u8 dst_vfid;
+};
+
+/**
+* @brief ecore_dmae_host2grc - copy data from source addr to
+* dmae registers using the given ptt
+*
+* @param p_hwfn
+* @param p_ptt
+* @param source_addr
+* @param grc_addr (dmae_data_offset)
+* @param size_in_dwords
+* @param flags (one of the flags defined above)
+*/
+enum _ecore_status_t
+ecore_dmae_host2grc(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u64 source_addr,
+ u32 grc_addr, u32 size_in_dwords, u32 flags);
+
+/**
+* @brief ecore_dmae_grc2host - Read data from dmae data offset
+* to source address using the given ptt
+*
+* @param p_ptt
+* @param grc_addr (dmae_data_offset)
+* @param dest_addr
+* @param size_in_dwords
+* @param flags - one of the flags defined above
+*/
+enum _ecore_status_t
+ecore_dmae_grc2host(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u32 grc_addr,
+ dma_addr_t dest_addr, u32 size_in_dwords, u32 flags);
+
+/**
+* @brief ecore_dmae_host2host - copy data from to source address
+* to a destination address (for SRIOV) using the given ptt
+*
+* @param p_hwfn
+* @param p_ptt
+* @param source_addr
+* @param dest_addr
+* @param size_in_dwords
+* @param params
+*/
+enum _ecore_status_t
+ecore_dmae_host2host(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ dma_addr_t source_addr,
+ dma_addr_t dest_addr,
+ u32 size_in_dwords, struct ecore_dmae_params *p_params);
+
+/**
+ * @brief ecore_chain_alloc - Allocate and initialize a chain
+ *
+ * @param p_hwfn
+ * @param intended_use
+ * @param mode
+ * @param num_elems
+ * @param elem_size
+ * @param p_chain
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t
+ecore_chain_alloc(struct ecore_dev *p_dev,
+ enum ecore_chain_use_mode intended_use,
+ enum ecore_chain_mode mode,
+ enum ecore_chain_cnt_type cnt_type,
+ u32 num_elems,
+ osal_size_t elem_size, struct ecore_chain *p_chain);
+
+/**
+ * @brief ecore_chain_free - Free chain DMA memory
+ *
+ * @param p_hwfn
+ * @param p_chain
+ */
+void ecore_chain_free(struct ecore_dev *p_dev, struct ecore_chain *p_chain);
+
+/**
+ * @@brief ecore_fw_l2_queue - Get absolute L2 queue ID
+ *
+ * @param p_hwfn
+ * @param src_id - relative to p_hwfn
+ * @param dst_id - absolute per engine
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_fw_l2_queue(struct ecore_hwfn *p_hwfn,
+ u16 src_id, u16 *dst_id);
+
+/**
+ * @@brief ecore_fw_vport - Get absolute vport ID
+ *
+ * @param p_hwfn
+ * @param src_id - relative to p_hwfn
+ * @param dst_id - absolute per engine
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_fw_vport(struct ecore_hwfn *p_hwfn,
+ u8 src_id, u8 *dst_id);
+
+/**
+ * @@brief ecore_fw_rss_eng - Get absolute RSS engine ID
+ *
+ * @param p_hwfn
+ * @param src_id - relative to p_hwfn
+ * @param dst_id - absolute per engine
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_fw_rss_eng(struct ecore_hwfn *p_hwfn,
+ u8 src_id, u8 *dst_id);
+
+/**
+ * @brief ecore_llh_add_mac_filter - configures a MAC filter in llh
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param p_filter - MAC to add
+ */
+enum _ecore_status_t ecore_llh_add_mac_filter(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u8 *p_filter);
+
+/**
+ * @brief ecore_llh_remove_mac_filter - removes a MAC filtre from llh
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param p_filter - MAC to remove
+ */
+void ecore_llh_remove_mac_filter(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt, u8 *p_filter);
+
+/**
+ * @brief ecore_llh_add_ethertype_filter - configures a ethertype filter in llh
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param filter - ethertype to add
+ */
+enum _ecore_status_t ecore_llh_add_ethertype_filter(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 filter);
+
+/**
+ * @brief ecore_llh_remove_ethertype_filter - removes a ethertype llh filter
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param filter - ethertype to remove
+ */
+void ecore_llh_remove_ethertype_filter(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt, u16 filter);
+
+/**
+ * @brief ecore_llh_clear_all_filters - removes all MAC filters from llh
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ */
+void ecore_llh_clear_all_filters(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt);
+
+ /**
+*@brief Cleanup of previous driver remains prior to load
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param id - For PF, engine-relative. For VF, PF-relative.
+ * @param is_vf - true iff cleanup is made for a VF.
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_final_cleanup(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 id, bool is_vf);
+
+/**
+ * @brief ecore_test_registers - Perform register tests
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_test_registers(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt);
+
+/**
+ * @brief ecore_set_rxq_coalesce - Configure coalesce parameters for an Rx queue
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param coalesce - Coalesce value in micro seconds.
+ * @param qid - Queue index.
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_set_rxq_coalesce(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u8 coalesce, u8 qid);
+
+/**
+ * @brief ecore_set_txq_coalesce - Configure coalesce parameters for a Tx queue
+ *
+ * @param p_hwfn
+ * @param p_ptt
+ * @param coalesce - Coalesce value in micro seconds.
+ * @param qid - Queue index.
+ *
+ * @return enum _ecore_status_t
+ */
+enum _ecore_status_t ecore_set_txq_coalesce(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u8 coalesce, u8 qid);
+
+#endif
Code Review / deb_dpdk.git / blobdiff