* @return The required host memory size in 4KB units.
*/
u32 ecore_qm_pf_mem_size(u8 pf_id,
- u32 num_pf_cids,
- u32 num_vf_cids,
- u32 num_tids, u16 num_pf_pqs, u16 num_vf_pqs);
+ u32 num_pf_cids,
+ u32 num_vf_cids,
+ u32 num_tids,
+ u16 num_pf_pqs,
+ u16 num_vf_pqs);
/**
- * @brief ecore_qm_common_rt_init -
- * Prepare QM runtime init values for the engine phase
+ * @brief ecore_qm_common_rt_init - Prepare QM runtime init values for engine
+ * phase
*
* @param p_hwfn
* @param max_ports_per_engine - max number of ports per engine in HW
* @param pf_wfq_en - enable per-PF WFQ
* @param vport_rl_en - enable per-VPORT rate limiters
* @param vport_wfq_en - enable per-VPORT WFQ
- * @param port_params- array of size MAX_NUM_PORTS with parameters for each port
+ * @param port_params - array of size MAX_NUM_PORTS with params for each port
*
* @return 0 on success, -1 on error.
*/
int ecore_qm_common_rt_init(struct ecore_hwfn *p_hwfn,
- u8 max_ports_per_engine,
- u8 max_phys_tcs_per_port,
- bool pf_rl_en,
- bool pf_wfq_en,
- bool vport_rl_en,
- bool vport_wfq_en,
- struct init_qm_port_params
- port_params[MAX_NUM_PORTS]);
-
+ u8 max_ports_per_engine,
+ u8 max_phys_tcs_per_port,
+ bool pf_rl_en,
+ bool pf_wfq_en,
+ bool vport_rl_en,
+ bool vport_wfq_en,
+ struct init_qm_port_params port_params[MAX_NUM_PORTS]);
+/**
+ * @brief ecore_qm_pf_rt_init Prepare QM runtime init values for the PF phase
+ *
+ * @param p_hwfn
+ * @param p_ptt - ptt window used for writing the registers
+ * @param port_id - port ID
+ * @param pf_id - PF ID
+ * @param max_phys_tcs_per_port - max number of physical TCs per port in HW
+ * @param is_first_pf - 1 = first PF in engine, 0 = othwerwise
+ * @param num_pf_cids - number of connections used by this PF
+ * @param num_vf_cids - number of connections used by VFs of this PF
+ * @param num_tids - number of tasks used by this PF
+ * @param start_pq - first Tx PQ ID associated with this PF
+ * @param num_pf_pqs - number of Tx PQs associated with this PF (non-VF)
+ * @param num_vf_pqs - number of Tx PQs associated with a VF
+ * @param start_vport - first VPORT ID associated with this PF
+ * @param num_vports - number of VPORTs associated with this PF
+ * @param pf_wfq - WFQ weight. if PF WFQ is globally disabled, the weight must
+ * be 0. otherwise, the weight must be non-zero.
+ * @param pf_rl - rate limit in Mb/sec units. a value of 0 means don't
+ * configure. ignored if PF RL is globally disabled.
+ * @param pq_params - array of size (num_pf_pqs+num_vf_pqs) with parameters for
+ * each Tx PQ associated with the specified PF.
+ * @param vport_params - array of size num_vports with parameters for each
+ * associated VPORT.
+ *
+ * @return 0 on success, -1 on error.
+ */
int ecore_qm_pf_rt_init(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- u8 port_id,
- u8 pf_id,
- u8 max_phys_tcs_per_port,
- bool is_first_pf,
- u32 num_pf_cids,
- u32 num_vf_cids,
- u32 num_tids,
- u16 start_pq,
- u16 num_pf_pqs,
- u16 num_vf_pqs,
- u8 start_vport,
- u8 num_vports,
- u16 pf_wfq,
- u32 pf_rl,
- struct init_qm_pq_params *pq_params,
- struct init_qm_vport_params *vport_params);
+ struct ecore_ptt *p_ptt,
+ u8 port_id,
+ u8 pf_id,
+ u8 max_phys_tcs_per_port,
+ bool is_first_pf,
+ u32 num_pf_cids,
+ u32 num_vf_cids,
+ u32 num_tids,
+ u16 start_pq,
+ u16 num_pf_pqs,
+ u16 num_vf_pqs,
+ u8 start_vport,
+ u8 num_vports,
+ u16 pf_wfq,
+ u32 pf_rl,
+ struct init_qm_pq_params *pq_params,
+ struct init_qm_vport_params *vport_params);
/**
* @brief ecore_init_pf_wfq Initializes the WFQ weight of the specified PF
*
* @return 0 on success, -1 on error.
*/
int ecore_init_pf_wfq(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u8 pf_id, u16 pf_wfq);
+ struct ecore_ptt *p_ptt,
+ u8 pf_id,
+ u16 pf_wfq);
/**
* @brief ecore_init_pf_rl Initializes the rate limit of the specified PF
*
* @return 0 on success, -1 on error.
*/
int ecore_init_pf_rl(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u8 pf_id, u32 pf_rl);
+ struct ecore_ptt *p_ptt,
+ u8 pf_id,
+ u32 pf_rl);
/**
- * @brief ecore_init_vport_wfq Initializes the WFQ weight of the specified VPORT
+ * @brief ecore_init_vport_wfq Initializes the WFQ weight of specified VPORT
*
* @param p_hwfn
* @param p_ptt - ptt window used for writing the registers
* @return 0 on success, -1 on error.
*/
int ecore_init_vport_wfq(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- u16 first_tx_pq_id[NUM_OF_TCS], u16 vport_wfq);
+ struct ecore_ptt *p_ptt,
+ u16 first_tx_pq_id[NUM_OF_TCS],
+ u16 vport_wfq);
/**
* @brief ecore_init_vport_rl Initializes the rate limit of the specified VPORT
*
* @return 0 on success, -1 on error.
*/
int ecore_init_vport_rl(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u8 vport_id, u32 vport_rl);
+ struct ecore_ptt *p_ptt,
+ u8 vport_id,
+ u32 vport_rl);
/**
* @brief ecore_send_qm_stop_cmd Sends a stop command to the QM
*
* @param start_pq - first PQ ID to stop
* @param num_pqs - Number of PQs to stop, starting from start_pq.
*
- * @return bool, true if successful, false if timeout occurred while
- * waiting for QM command done.
+ * @return bool, true if successful, false if timeout occurred while waiting
+ * for QM command done.
*/
bool ecore_send_qm_stop_cmd(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- bool is_release_cmd,
- bool is_tx_pq, u16 start_pq, u16 num_pqs);
+ struct ecore_ptt *p_ptt,
+ bool is_release_cmd,
+ bool is_tx_pq,
+ u16 start_pq,
+ u16 num_pqs);
+#ifndef UNUSED_HSI_FUNC
/**
* @brief ecore_init_nig_ets - initializes the NIG ETS arbiter
*
* requirements are ignored when is_lb is cleared.
*/
void ecore_init_nig_ets(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- struct init_ets_req *req, bool is_lb);
+ struct ecore_ptt *p_ptt,
+ struct init_ets_req *req,
+ bool is_lb);
/**
* @brief ecore_init_nig_lb_rl - initializes the NIG LB RLs
*
* @param req - the NIG LB RLs initialization requirements.
*/
void ecore_init_nig_lb_rl(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- struct init_nig_lb_rl_req *req);
+ struct ecore_ptt *p_ptt,
+ struct init_nig_lb_rl_req *req);
+#endif /* UNUSED_HSI_FUNC */
/**
* @brief ecore_init_nig_pri_tc_map - initializes the NIG priority to TC map.
*
* @param req - required mapping from prioirties to TCs.
*/
void ecore_init_nig_pri_tc_map(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- struct init_nig_pri_tc_map_req *req);
+ struct ecore_ptt *p_ptt,
+ struct init_nig_pri_tc_map_req *req);
+#ifndef UNUSED_HSI_FUNC
/**
* @brief ecore_init_prs_ets - initializes the PRS Rx ETS arbiter
*
* @param req - the PRS ETS initialization requirements.
*/
void ecore_init_prs_ets(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, struct init_ets_req *req);
+ struct ecore_ptt *p_ptt,
+ struct init_ets_req *req);
+#endif /* UNUSED_HSI_FUNC */
+#ifndef UNUSED_HSI_FUNC
/**
* @brief ecore_init_brb_ram - initializes BRB RAM sizes per TC
*
* @param req - the BRB RAM initialization requirements.
*/
void ecore_init_brb_ram(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, struct init_brb_ram_req *req);
+ struct ecore_ptt *p_ptt,
+ struct init_brb_ram_req *req);
+#endif /* UNUSED_HSI_FUNC */
+#ifndef UNUSED_HSI_FUNC
/**
- * @brief ecore_set_engine_mf_ovlan_eth_type - initializes Nig,Prs,Pbf
- * and llh ethType Regs to input ethType
- * should Be called once per engine if engine is in BD mode.
+ * @brief ecore_set_engine_mf_ovlan_eth_type - initializes Nig,Prs,Pbf and llh
+ * ethType Regs to input ethType
+ * should Be called once per engine
+ * if engine
+ * is in BD mode.
*
* @param p_ptt - ptt window used for writing the registers.
* @param ethType - etherType to configure
*/
void ecore_set_engine_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 eth_type);
+ struct ecore_ptt *p_ptt, u32 ethType);
/**
- * @brief ecore_set_port_mf_ovlan_eth_type - initializes DORQ ethType Regs
- * to input ethType
- * should Be called once per port.
+ * @brief ecore_set_port_mf_ovlan_eth_type - initializes DORQ ethType Regs to
+ * input ethType should Be called
+ * once per port.
*
* @param p_ptt - ptt window used for writing the registers.
* @param ethType - etherType to configure
*/
void ecore_set_port_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 eth_type);
+ struct ecore_ptt *p_ptt, u32 ethType);
+#endif /* UNUSED_HSI_FUNC */
/**
- * @brief ecore_set_vxlan_dest_port - init vxlan tunnel destination udp port
+ * @brief ecore_set_vxlan_dest_port - initializes vxlan tunnel destination udp
+ * port
*
* @param p_ptt - ptt window used for writing the registers.
* @param dest_port - vxlan destination udp port.
*/
void ecore_set_vxlan_dest_port(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u16 dest_port);
+ struct ecore_ptt *p_ptt,
+ u16 dest_port);
/**
* @brief ecore_set_vxlan_enable - enable or disable VXLAN tunnel in HW
*
- * @param p_ptt - ptt window used for writing the registers.
+ * @param p_ptt - ptt window used for writing the registers.
* @param vxlan_enable - vxlan enable flag.
*/
void ecore_set_vxlan_enable(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, bool vxlan_enable);
+ struct ecore_ptt *p_ptt,
+ bool vxlan_enable);
/**
* @brief ecore_set_gre_enable - enable or disable GRE tunnel in HW
*
*/
void ecore_set_gre_enable(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
- bool eth_gre_enable, bool ip_gre_enable);
+ bool eth_gre_enable,
+ bool ip_gre_enable);
/**
- * @brief ecore_set_geneve_dest_port - init geneve tunnel destination udp port
+ * @brief ecore_set_geneve_dest_port - initializes geneve tunnel destination
+ * udp port
*
* @param p_ptt - ptt window used for writing the registers.
* @param dest_port - geneve destination udp port.
*/
void ecore_set_geneve_dest_port(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u16 dest_port);
+ struct ecore_ptt *p_ptt,
+ u16 dest_port);
/**
* @brief ecore_set_gre_enable - enable or disable GRE tunnel in HW
*
*/
void ecore_set_geneve_enable(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
- bool eth_geneve_enable, bool ip_geneve_enable);
+ bool eth_geneve_enable,
+ bool ip_geneve_enable);
+#ifndef UNUSED_HSI_FUNC
+/**
+* @brief ecore_set_gft_event_id_cm_hdr - configure GFT event id and cm header
+*
+* @param p_ptt - ptt window used for writing the registers.
+*/
+void ecore_set_gft_event_id_cm_hdr(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt);
+/**
+* @brief ecore_set_rfs_mode_enable - enable and configure HW for RFS
+*
+*
+* @param p_ptt - ptt window used for writing the registers.
+* @param pf_id - pf on which to enable RFS.
+* @param tcp - set profile tcp packets.
+* @param udp - set profile udp packet.
+* @param ipv4 - set profile ipv4 packet.
+* @param ipv6 - set profile ipv6 packet.
+*/
+void ecore_set_rfs_mode_enable(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 pf_id,
+ bool tcp,
+ bool udp,
+ bool ipv4,
+ bool ipv6);
+#endif /* UNUSED_HSI_FUNC */
+/**
+* @brief ecore_config_vf_zone_size_mode - Configure VF zone size mode. Must be
+* used before first ETH queue started.
+*
+*
+* @param p_ptt - ptt window used for writing the registers. Don't care
+* if runtime_init used
+* @param mode - VF zone size mode. Use enum vf_zone_size_mode.
+* @param runtime_init - Set 1 to init runtime registers in engine phase. Set 0
+* if VF zone size mode configured after engine phase.
+*/
+void ecore_config_vf_zone_size_mode(struct ecore_hwfn *p_hwfn, struct ecore_ptt
+ *p_ptt, u16 mode, bool runtime_init);
+/**
+* @brief ecore_get_mstorm_queue_stat_offset - get mstorm statistics offset by VF
+* zone size mode.
+*
+* @param stat_cnt_id - statistic counter id
+* @param vf_zone_size_mode - VF zone size mode. Use enum vf_zone_size_mode.
+*/
+u32 ecore_get_mstorm_queue_stat_offset(struct ecore_hwfn *p_hwfn,
+ u16 stat_cnt_id, u16 vf_zone_size_mode);
+/**
+* @brief ecore_get_mstorm_eth_vf_prods_offset - VF producer offset by VF zone
+* size mode.
+*
+* @param vf_id - vf id.
+* @param vf_queue_id - per VF rx queue id.
+* @param vf_zone_size_mode - vf zone size mode. Use enum vf_zone_size_mode.
+*/
+u32 ecore_get_mstorm_eth_vf_prods_offset(struct ecore_hwfn *p_hwfn, u8 vf_id, u8
+ vf_queue_id, u16 vf_zone_size_mode);
#endif
Code Review / deb_dpdk.git / blobdiff