* Returns the required host memory size in 4KB units.
* Must be called before all QM init HSI functions.
*
- * @param pf_id - physical function ID
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
*
* @return The required host memory size in 4KB units.
*/
-u32 ecore_qm_pf_mem_size(u8 pf_id,
- u32 num_pf_cids,
+u32 ecore_qm_pf_mem_size(u32 num_pf_cids,
u32 num_vf_cids,
u32 num_tids,
u16 num_pf_pqs,
* @param port_id - port ID
* @param pf_id - PF ID
* @param max_phys_tcs_per_port - max number of physical TCs per port in HW
- * @param is_first_pf - 1 = first PF in engine, 0 = othwerwise
* @param num_pf_cids - number of connections used by this PF
* @param num_vf_cids - number of connections used by VFs of this PF
* @param num_tids - number of tasks used by this PF
* be 0. otherwise, the weight must be non-zero.
* @param pf_rl - rate limit in Mb/sec units. a value of 0 means don't
* configure. ignored if PF RL is globally disabled.
+ * @param link_speed - link speed in Mbps.
* @param pq_params - array of size (num_pf_pqs+num_vf_pqs) with parameters for
* each Tx PQ associated with the specified PF.
* @param vport_params - array of size num_vports with parameters for each
* @return 0 on success, -1 on error.
*/
int ecore_qm_pf_rt_init(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- u8 port_id,
- u8 pf_id,
- u8 max_phys_tcs_per_port,
- bool is_first_pf,
- u32 num_pf_cids,
- u32 num_vf_cids,
- u32 num_tids,
- u16 start_pq,
- u16 num_pf_pqs,
- u16 num_vf_pqs,
- u8 start_vport,
- u8 num_vports,
- u16 pf_wfq,
- u32 pf_rl,
- struct init_qm_pq_params *pq_params,
- struct init_qm_vport_params *vport_params);
+ struct ecore_ptt *p_ptt,
+ u8 port_id,
+ u8 pf_id,
+ u8 max_phys_tcs_per_port,
+ u32 num_pf_cids,
+ u32 num_vf_cids,
+ u32 num_tids,
+ u16 start_pq,
+ u16 num_pf_pqs,
+ u16 num_vf_pqs,
+ u8 start_vport,
+ u8 num_vports,
+ u16 pf_wfq,
+ u32 pf_rl,
+ u32 link_speed,
+ struct init_qm_pq_params *pq_params,
+ struct init_qm_vport_params *vport_params);
/**
* @brief ecore_init_pf_wfq Initializes the WFQ weight of the specified PF
* @brief ecore_init_vport_rl - Initializes the rate limit of the specified
* VPORT.
*
- * @param p_hwfn - HW device data
- * @param p_ptt - ptt window used for writing the registers
- * @param vport_id - VPORT ID
- * @param vport_rl - rate limit in Mb/sec units
+ * @param p_hwfn - HW device data
+ * @param p_ptt - ptt window used for writing the registers
+ * @param vport_id - VPORT ID
+ * @param vport_rl - rate limit in Mb/sec units
+ * @param link_speed - link speed in Mbps.
*
* @return 0 on success, -1 on error.
*/
int ecore_init_vport_rl(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u8 vport_id,
- u32 vport_rl);
+ u32 vport_rl,
+ u32 link_speed);
/**
* @brief ecore_send_qm_stop_cmd Sends a stop command to the QM
#endif /* UNUSED_HSI_FUNC */
#ifndef UNUSED_HSI_FUNC
-/**
- * @brief ecore_set_engine_mf_ovlan_eth_type - initializes Nig,Prs,Pbf and llh
- * ethType Regs to input ethType
- * should Be called once per engine
- * if engine
- * is in BD mode.
- *
- * @param p_ptt - ptt window used for writing the registers.
- * @param ethType - etherType to configure
- */
-void ecore_set_engine_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 ethType);
-
/**
* @brief ecore_set_port_mf_ovlan_eth_type - initializes DORQ ethType Regs to
* input ethType should Be called
* once per port.
*
- * @param p_ptt - ptt window used for writing the registers.
+ * @param p_hwfn - HW device data
* @param ethType - etherType to configure
*/
void ecore_set_port_mf_ovlan_eth_type(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt, u32 ethType);
+ u32 ethType);
#endif /* UNUSED_HSI_FUNC */
/**
struct ecore_ptt *p_ptt);
/**
- * @brief ecore_set_rfs_mode_disable - Disable and configure HW for RFS
+ * @brief ecore_gft_disable - Disable and GFT
*
* @param p_hwfn - HW device data
* @param p_ptt - ptt window used for writing the registers.
- * @param pf_id - pf on which to disable RFS.
+ * @param pf_id - pf on which to disable GFT.
*/
-void ecore_set_rfs_mode_disable(struct ecore_hwfn *p_hwfn,
- struct ecore_ptt *p_ptt,
- u16 pf_id);
+void ecore_gft_disable(struct ecore_hwfn *p_hwfn,
+ struct ecore_ptt *p_ptt,
+ u16 pf_id);
/**
-* @brief ecore_set_rfs_mode_enable - enable and configure HW for RFS
+ * @brief ecore_gft_config - Enable and configure HW for GFT
*
* @param p_ptt - ptt window used for writing the registers.
-* @param pf_id - pf on which to enable RFS.
+ * @param pf_id - pf on which to enable GFT.
* @param tcp - set profile tcp packets.
* @param udp - set profile udp packet.
* @param ipv4 - set profile ipv4 packet.
* @param ipv6 - set profile ipv6 packet.
+ * @param profile_type - define packet same fields. Use enum gft_profile_type.
*/
-void ecore_set_rfs_mode_enable(struct ecore_hwfn *p_hwfn,
+void ecore_gft_config(struct ecore_hwfn *p_hwfn,
struct ecore_ptt *p_ptt,
u16 pf_id,
bool tcp,
bool udp,
bool ipv4,
- bool ipv6);
+ bool ipv6,
+ enum gft_profile_type profile_type);
#endif /* UNUSED_HSI_FUNC */
/**
* @param ctx_type - context type.
* @param cid - context cid.
*/
-void ecore_calc_session_ctx_validation(struct ecore_hwfn *p_hwfn,
- void *p_ctx_mem,
+void ecore_calc_session_ctx_validation(void *p_ctx_mem,
u16 ctx_size,
u8 ctx_type,
u32 cid);
+
/**
* @brief ecore_calc_task_ctx_validation - Calcualte validation byte for task
* context.
*
- * @param p_hwfn - HW device data
* @param p_ctx_mem - pointer to context memory.
* @param ctx_size - context size.
* @param ctx_type - context type.
* @param tid - context tid.
*/
-void ecore_calc_task_ctx_validation(struct ecore_hwfn *p_hwfn,
- void *p_ctx_mem,
+void ecore_calc_task_ctx_validation(void *p_ctx_mem,
u16 ctx_size,
u8 ctx_type,
u32 tid);
+
/**
* @brief ecore_memset_session_ctx - Memset session context to 0 while
* preserving validation bytes.
Code Review / deb_dpdk.git / blobdiff