-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2014 Intel Corporation
*/
#include <stdio.h>
#include <getopt.h>
#include <netinet/in.h>
-#include <linux/if.h>
+#include <net/if.h>
+#ifdef RTE_EXEC_ENV_LINUXAPP
#include <linux/if_tun.h>
+#endif
#include <fcntl.h>
#include <sys/ioctl.h>
#include <unistd.h>
#include <rte_log.h>
#include <rte_memory.h>
#include <rte_memcpy.h>
-#include <rte_memzone.h>
#include <rte_eal.h>
#include <rte_per_lcore.h>
#include <rte_launch.h>
#include <rte_lcore.h>
#include <rte_branch_prediction.h>
#include <rte_interrupts.h>
-#include <rte_pci.h>
#include <rte_debug.h>
#include <rte_ether.h>
#include <rte_ethdev.h>
-#include <rte_log.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
#include <rte_string_fns.h>
#define MEMPOOL_CACHE_SZ PKT_BURST_SZ
/* Number of RX ring descriptors */
-#define NB_RXD 128
+#define NB_RXD 1024
/* Number of TX ring descriptors */
-#define NB_TXD 512
+#define NB_TXD 1024
/*
* RX and TX Prefetch, Host, and Write-back threshold values should be
*/
/* Options for configuring ethernet port */
-static const struct rte_eth_conf port_conf = {
+static struct rte_eth_conf port_conf = {
.rxmode = {
- .header_split = 0, /* Header Split disabled */
- .hw_ip_checksum = 0, /* IP checksum offload disabled */
- .hw_vlan_filter = 0, /* VLAN filtering disabled */
- .jumbo_frame = 0, /* Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /* CRC stripped by hardware */
+ .ignore_offload_bitfield = 1,
+ .offloads = DEV_RX_OFFLOAD_CRC_STRIP,
},
.txmode = {
.mq_mode = ETH_MQ_TX_NONE,
static uint64_t output_cores_mask = 0;
/* Array storing port_id that is associated with each lcore */
-static uint8_t port_ids[RTE_MAX_LCORE];
+static uint16_t port_ids[RTE_MAX_LCORE];
/* Structure type for recording lcore-specific stats */
struct stats {
uint64_t rx;
uint64_t tx;
uint64_t dropped;
-};
+} __rte_cache_aligned;
/* Array of lcore-specific stats */
static struct stats lcore_stats[RTE_MAX_LCORE];
}
}
+#ifdef RTE_EXEC_ENV_LINUXAPP
/*
* Create a tap network interface, or use existing one with same name.
* If name[0]='\0' then a name is automatically assigned and returned in name.
return fd;
}
+#else
+/*
+ * Find a free tap network interface, or create a new one.
+ * The name is automatically assigned and returned in name.
+ */
+static int tap_create(char *name)
+{
+ int i, fd = -1;
+ char devname[PATH_MAX];
+
+ for (i = 0; i < 255; i++) {
+ snprintf(devname, sizeof(devname), "/dev/tap%d", i);
+ fd = open(devname, O_RDWR);
+ if (fd >= 0 || errno != EBUSY)
+ break;
+ }
+
+ if (name)
+ snprintf(name, IFNAMSIZ, "tap%d", i);
+
+ return fd;
+}
+#endif
/* Main processing loop */
static int
setup_port_lcore_affinities(void)
{
unsigned long i;
- uint8_t tx_port = 0;
- uint8_t rx_port = 0;
+ uint16_t tx_port = 0;
+ uint16_t rx_port = 0;
/* Setup port_ids[] array, and check masks were ok */
RTE_LCORE_FOREACH(i) {
/* Initialise a single port on an Ethernet device */
static void
-init_port(uint8_t port)
+init_port(uint16_t port)
{
int ret;
+ uint16_t nb_rxd = NB_RXD;
+ uint16_t nb_txd = NB_TXD;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+ struct rte_eth_conf local_port_conf = port_conf;
/* Initialise device and RX/TX queues */
- PRINT_INFO("Initialising port %u ...", (unsigned)port);
+ PRINT_INFO("Initialising port %u ...", port);
fflush(stdout);
- ret = rte_eth_dev_configure(port, 1, 1, &port_conf);
+ rte_eth_dev_info_get(port, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ ret = rte_eth_dev_configure(port, 1, 1, &local_port_conf);
if (ret < 0)
- FATAL_ERROR("Could not configure port%u (%d)",
- (unsigned)port, ret);
+ FATAL_ERROR("Could not configure port%u (%d)", port, ret);
- ret = rte_eth_rx_queue_setup(port, 0, NB_RXD, rte_eth_dev_socket_id(port),
- NULL,
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(port, &nb_rxd, &nb_txd);
+ if (ret < 0)
+ FATAL_ERROR("Could not adjust number of descriptors for port%u (%d)",
+ port, ret);
+
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
+ ret = rte_eth_rx_queue_setup(port, 0, nb_rxd,
+ rte_eth_dev_socket_id(port),
+ &rxq_conf,
pktmbuf_pool);
if (ret < 0)
FATAL_ERROR("Could not setup up RX queue for port%u (%d)",
- (unsigned)port, ret);
-
- ret = rte_eth_tx_queue_setup(port, 0, NB_TXD, rte_eth_dev_socket_id(port),
- NULL);
+ port, ret);
+
+ txq_conf = dev_info.default_txconf;
+ txq_conf.txq_flags = ETH_TXQ_FLAGS_IGNORE;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
+ ret = rte_eth_tx_queue_setup(port, 0, nb_txd,
+ rte_eth_dev_socket_id(port),
+ &txq_conf);
if (ret < 0)
FATAL_ERROR("Could not setup up TX queue for port%u (%d)",
- (unsigned)port, ret);
+ port, ret);
ret = rte_eth_dev_start(port);
if (ret < 0)
- FATAL_ERROR("Could not start port%u (%d)", (unsigned)port, ret);
+ FATAL_ERROR("Could not start port%u (%d)", port, ret);
rte_eth_promiscuous_enable(port);
}
/* Check the link status of all ports in up to 9s, and print them finally */
static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
{
#define CHECK_INTERVAL 100 /* 100ms */
#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
- uint8_t portid, count, all_ports_up, print_flag = 0;
+ uint16_t portid;
+ uint8_t count, all_ports_up, print_flag = 0;
struct rte_eth_link link;
printf("\nChecking link status");
/* print link status if flag set */
if (print_flag == 1) {
if (link.link_status)
- printf("Port %d Link Up - speed %u "
- "Mbps - %s\n", (uint8_t)portid,
- (unsigned)link.link_speed,
+ printf(
+ "Port%d Link Up. Speed %u Mbps - %s\n",
+ portid, link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
else
- printf("Port %d Link Down\n",
- (uint8_t)portid);
+ printf("Port %d Link Down\n", portid);
continue;
}
/* clear all_ports_up flag if any link down */
{
int ret;
unsigned i,high_port;
- uint8_t nb_sys_ports, port;
+ uint16_t nb_sys_ports, port;
/* Associate signal_hanlder function with USR signals */
signal(SIGUSR1, signal_handler);
Code Review / deb_dpdk.git / blobdiff