New upstream version 18.08

[deb_dpdk.git] / examples / ip_pipeline / config / edge_router_downstream.cfg

diff --git a/examples/ip_pipeline/config/edge_router_downstream.cfg b/examples/ip_pipeline/config/edge_router_downstream.cfg
deleted file mode 100644 (file)
index c6b4e1f..0000000
--- a/examples/ip_pipeline/config/edge_router_downstream.cfg
+++ /dev/null
@@ -1,97 +0,0 @@
-;   BSD LICENSE
-;
-;   Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
-;   All rights reserved.
-;
-;   Redistribution and use in source and binary forms, with or without
-;   modification, are permitted provided that the following conditions
-;   are met:
-;
-;     * Redistributions of source code must retain the above copyright
-;       notice, this list of conditions and the following disclaimer.
-;     * Redistributions in binary form must reproduce the above copyright
-;       notice, this list of conditions and the following disclaimer in
-;       the documentation and/or other materials provided with the
-;       distribution.
-;     * Neither the name of Intel Corporation nor the names of its
-;       contributors may be used to endorse or promote products derived
-;       from this software without specific prior written permission.
-;
-;   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-;   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-;   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-;   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-;   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-;   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-;   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-;   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-;   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-;   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-;   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-
-;   An edge router typically sits between two networks such as the provider
-;   core network and the provider access network. A typical packet processing
-;   pipeline for the downstream traffic (i.e. traffic from core to access
-;   network) contains the following functional blocks: Packet RX & Routing,
-;   Traffic management and Packet TX. The input packets are assumed to be
-;   IPv4, while the output packets are Q-in-Q IPv4.
-;
-;  A simple implementation for this functional pipeline is presented below.
-;
-;                  Packet Rx &                Traffic Management               Packet Tx
-;                   Routing                    (Pass-Through)                (Pass-Through)
-;             _____________________  SWQ0  ______________________  SWQ4  _____________________
-; RXQ0.0 --->|                     |----->|                      |----->|                     |---> TXQ0.0
-;            |                     | SWQ1 |                      | SWQ5 |                     |
-; RXQ1.0 --->|                     |----->|                      |----->|                     |---> TXQ1.0
-;            |        (P1)         | SWQ2 |         (P2)         | SWQ6 |        (P3)         |
-; RXQ2.0 --->|                     |----->|                      |----->|                     |---> TXQ2.0
-;            |                     | SWQ3 |                      | SWQ7 |                     |
-; RXQ3.0 --->|                     |----->|                      |----->|                     |---> TXQ3.0
-;            |_____________________|      |______________________|      |_____________________|
-;                       |                  |  ^  |  ^  |  ^  |  ^
-;                       |                  |__|  |__|  |__|  |__|
-;                       +--> SINK0          TM0   TM1   TM2   TM3
-;                      (Default)
-;
-; Input packet: Ethernet/IPv4
-; Output packet: Ethernet/QinQ/IPv4
-;
-; Packet buffer layout:
-; #    Field Name              Offset (Bytes)  Size (Bytes)
-; 0    Mbuf                    0               128
-; 1    Headroom                128             128
-; 2    Ethernet header         256             14
-; 3    IPv4 header             270             20
-
-[EAL]
-log_level = 0
-
-[PIPELINE0]
-type = MASTER
-core = 0
-
-[PIPELINE1]
-type = ROUTING
-core = 1
-pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
-pktq_out = SWQ0 SWQ1 SWQ2 SWQ3 SINK0
-encap = ethernet_qinq
-qinq_sched = test
-ip_hdr_offset = 270
-
-[PIPELINE2]
-type = PASS-THROUGH
-core = 2
-pktq_in = SWQ0 SWQ1 SWQ2 SWQ3 TM0 TM1 TM2 TM3
-pktq_out = TM0 TM1 TM2 TM3 SWQ4 SWQ5 SWQ6 SWQ7
-
-[PIPELINE3]
-type = PASS-THROUGH
-core = 3
-pktq_in = SWQ4 SWQ5 SWQ6 SWQ7
-pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
-
-[MEMPOOL0]
-pool_size = 2M