Imported Upstream version 16.04
[deb_dpdk.git] / examples / l2fwd-crypto / main.c
diff --git a/examples/l2fwd-crypto/main.c b/examples/l2fwd-crypto/main.c
new file mode 100644 (file)
index 0000000..d4e2d8d
--- /dev/null
@@ -0,0 +1,2056 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2015-2016 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <time.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <netinet/in.h>
+#include <setjmp.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <errno.h>
+#include <getopt.h>
+
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_common.h>
+#include <rte_cryptodev.h>
+#include <rte_cycles.h>
+#include <rte_debug.h>
+#include <rte_eal.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_interrupts.h>
+#include <rte_ip.h>
+#include <rte_launch.h>
+#include <rte_lcore.h>
+#include <rte_log.h>
+#include <rte_malloc.h>
+#include <rte_mbuf.h>
+#include <rte_memcpy.h>
+#include <rte_memory.h>
+#include <rte_mempool.h>
+#include <rte_memzone.h>
+#include <rte_pci.h>
+#include <rte_per_lcore.h>
+#include <rte_prefetch.h>
+#include <rte_random.h>
+#include <rte_ring.h>
+#include <rte_hexdump.h>
+
+enum cdev_type {
+       CDEV_TYPE_ANY,
+       CDEV_TYPE_HW,
+       CDEV_TYPE_SW
+};
+
+#define RTE_LOGTYPE_L2FWD RTE_LOGTYPE_USER1
+
+#define NB_MBUF   8192
+
+#define MAX_STR_LEN 32
+#define MAX_KEY_SIZE 128
+#define MAX_PKT_BURST 32
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 128
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+
+/* ethernet addresses of ports */
+static struct ether_addr l2fwd_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* mask of enabled ports */
+static uint64_t l2fwd_enabled_port_mask;
+static uint64_t l2fwd_enabled_crypto_mask;
+
+/* list of enabled ports */
+static uint32_t l2fwd_dst_ports[RTE_MAX_ETHPORTS];
+
+
+struct pkt_buffer {
+       unsigned len;
+       struct rte_mbuf *buffer[MAX_PKT_BURST];
+};
+
+struct op_buffer {
+       unsigned len;
+       struct rte_crypto_op *buffer[MAX_PKT_BURST];
+};
+
+#define MAX_RX_QUEUE_PER_LCORE 16
+#define MAX_TX_QUEUE_PER_PORT 16
+
+enum l2fwd_crypto_xform_chain {
+       L2FWD_CRYPTO_CIPHER_HASH,
+       L2FWD_CRYPTO_HASH_CIPHER,
+       L2FWD_CRYPTO_CIPHER_ONLY,
+       L2FWD_CRYPTO_HASH_ONLY
+};
+
+struct l2fwd_key {
+       uint8_t *data;
+       uint32_t length;
+       phys_addr_t phys_addr;
+};
+
+char supported_auth_algo[RTE_CRYPTO_AUTH_LIST_END][MAX_STR_LEN];
+char supported_cipher_algo[RTE_CRYPTO_CIPHER_LIST_END][MAX_STR_LEN];
+
+/** l2fwd crypto application command line options */
+struct l2fwd_crypto_options {
+       unsigned portmask;
+       unsigned nb_ports_per_lcore;
+       unsigned refresh_period;
+       unsigned single_lcore:1;
+
+       enum cdev_type type;
+       unsigned sessionless:1;
+
+       enum l2fwd_crypto_xform_chain xform_chain;
+
+       struct rte_crypto_sym_xform cipher_xform;
+       unsigned ckey_param;
+       int ckey_random_size;
+
+       struct l2fwd_key iv;
+       unsigned iv_param;
+       int iv_random_size;
+
+       struct rte_crypto_sym_xform auth_xform;
+       uint8_t akey_param;
+       int akey_random_size;
+
+       struct l2fwd_key aad;
+       unsigned aad_param;
+       int aad_random_size;
+
+       int digest_size;
+
+       uint16_t block_size;
+       char string_type[MAX_STR_LEN];
+};
+
+/** l2fwd crypto lcore params */
+struct l2fwd_crypto_params {
+       uint8_t dev_id;
+       uint8_t qp_id;
+
+       unsigned digest_length;
+       unsigned block_size;
+
+       struct l2fwd_key iv;
+       struct l2fwd_key aad;
+       struct rte_cryptodev_sym_session *session;
+
+       uint8_t do_cipher;
+       uint8_t do_hash;
+       uint8_t hash_verify;
+
+       enum rte_crypto_cipher_algorithm cipher_algo;
+       enum rte_crypto_auth_algorithm auth_algo;
+};
+
+/** lcore configuration */
+struct lcore_queue_conf {
+       unsigned nb_rx_ports;
+       unsigned rx_port_list[MAX_RX_QUEUE_PER_LCORE];
+
+       unsigned nb_crypto_devs;
+       unsigned cryptodev_list[MAX_RX_QUEUE_PER_LCORE];
+
+       struct op_buffer op_buf[RTE_MAX_ETHPORTS];
+       struct pkt_buffer pkt_buf[RTE_MAX_ETHPORTS];
+} __rte_cache_aligned;
+
+struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
+
+static const struct rte_eth_conf port_conf = {
+       .rxmode = {
+               .mq_mode = ETH_MQ_RX_NONE,
+               .max_rx_pkt_len = ETHER_MAX_LEN,
+               .split_hdr_size = 0,
+               .header_split   = 0, /**< Header Split disabled */
+               .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+               .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+               .hw_strip_crc   = 0, /**< CRC stripped by hardware */
+       },
+       .txmode = {
+               .mq_mode = ETH_MQ_TX_NONE,
+       },
+};
+
+struct rte_mempool *l2fwd_pktmbuf_pool;
+struct rte_mempool *l2fwd_crypto_op_pool;
+
+/* Per-port statistics struct */
+struct l2fwd_port_statistics {
+       uint64_t tx;
+       uint64_t rx;
+
+       uint64_t crypto_enqueued;
+       uint64_t crypto_dequeued;
+
+       uint64_t dropped;
+} __rte_cache_aligned;
+
+struct l2fwd_crypto_statistics {
+       uint64_t enqueued;
+       uint64_t dequeued;
+
+       uint64_t errors;
+} __rte_cache_aligned;
+
+struct l2fwd_port_statistics port_statistics[RTE_MAX_ETHPORTS];
+struct l2fwd_crypto_statistics crypto_statistics[RTE_MAX_ETHPORTS];
+
+/* A tsc-based timer responsible for triggering statistics printout */
+#define TIMER_MILLISECOND 2000000ULL /* around 1ms at 2 Ghz */
+#define MAX_TIMER_PERIOD 86400UL /* 1 day max */
+
+/* default period is 10 seconds */
+static int64_t timer_period = 10 * TIMER_MILLISECOND * 1000;
+
+/* Print out statistics on packets dropped */
+static void
+print_stats(void)
+{
+       uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
+       uint64_t total_packets_enqueued, total_packets_dequeued,
+               total_packets_errors;
+       unsigned portid;
+       uint64_t cdevid;
+
+       total_packets_dropped = 0;
+       total_packets_tx = 0;
+       total_packets_rx = 0;
+       total_packets_enqueued = 0;
+       total_packets_dequeued = 0;
+       total_packets_errors = 0;
+
+       const char clr[] = { 27, '[', '2', 'J', '\0' };
+       const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+               /* Clear screen and move to top left */
+       printf("%s%s", clr, topLeft);
+
+       printf("\nPort statistics ====================================");
+
+       for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+               /* skip disabled ports */
+               if ((l2fwd_enabled_port_mask & (1 << portid)) == 0)
+                       continue;
+               printf("\nStatistics for port %u ------------------------------"
+                          "\nPackets sent: %32"PRIu64
+                          "\nPackets received: %28"PRIu64
+                          "\nPackets dropped: %29"PRIu64,
+                          portid,
+                          port_statistics[portid].tx,
+                          port_statistics[portid].rx,
+                          port_statistics[portid].dropped);
+
+               total_packets_dropped += port_statistics[portid].dropped;
+               total_packets_tx += port_statistics[portid].tx;
+               total_packets_rx += port_statistics[portid].rx;
+       }
+       printf("\nCrypto statistics ==================================");
+
+       for (cdevid = 0; cdevid < RTE_CRYPTO_MAX_DEVS; cdevid++) {
+               /* skip disabled ports */
+               if ((l2fwd_enabled_crypto_mask & (1lu << cdevid)) == 0)
+                       continue;
+               printf("\nStatistics for cryptodev %"PRIu64
+                               " -------------------------"
+                          "\nPackets enqueued: %28"PRIu64
+                          "\nPackets dequeued: %28"PRIu64
+                          "\nPackets errors: %30"PRIu64,
+                          cdevid,
+                          crypto_statistics[cdevid].enqueued,
+                          crypto_statistics[cdevid].dequeued,
+                          crypto_statistics[cdevid].errors);
+
+               total_packets_enqueued += crypto_statistics[cdevid].enqueued;
+               total_packets_dequeued += crypto_statistics[cdevid].dequeued;
+               total_packets_errors += crypto_statistics[cdevid].errors;
+       }
+       printf("\nAggregate statistics ==============================="
+                  "\nTotal packets received: %22"PRIu64
+                  "\nTotal packets enqueued: %22"PRIu64
+                  "\nTotal packets dequeued: %22"PRIu64
+                  "\nTotal packets sent: %26"PRIu64
+                  "\nTotal packets dropped: %23"PRIu64
+                  "\nTotal packets crypto errors: %17"PRIu64,
+                  total_packets_rx,
+                  total_packets_enqueued,
+                  total_packets_dequeued,
+                  total_packets_tx,
+                  total_packets_dropped,
+                  total_packets_errors);
+       printf("\n====================================================\n");
+}
+
+static void
+fill_supported_algorithm_tables(void)
+{
+       unsigned i;
+
+       for (i = 0; i < RTE_CRYPTO_AUTH_LIST_END; i++)
+               strcpy(supported_auth_algo[i], "NOT_SUPPORTED");
+
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_AES_GCM], "AES_GCM");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_MD5_HMAC], "MD5_HMAC");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_NULL], "NULL");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA1_HMAC], "SHA1_HMAC");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA224_HMAC], "SHA224_HMAC");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA256_HMAC], "SHA256_HMAC");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA384_HMAC], "SHA384_HMAC");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SHA512_HMAC], "SHA512_HMAC");
+       strcpy(supported_auth_algo[RTE_CRYPTO_AUTH_SNOW3G_UIA2], "SNOW3G_UIA2");
+
+       for (i = 0; i < RTE_CRYPTO_CIPHER_LIST_END; i++)
+               strcpy(supported_cipher_algo[i], "NOT_SUPPORTED");
+
+       strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_AES_CBC], "AES_CBC");
+       strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_AES_GCM], "AES_GCM");
+       strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_NULL], "NULL");
+       strcpy(supported_cipher_algo[RTE_CRYPTO_CIPHER_SNOW3G_UEA2], "SNOW3G_UEA2");
+}
+
+
+static int
+l2fwd_crypto_send_burst(struct lcore_queue_conf *qconf, unsigned n,
+               struct l2fwd_crypto_params *cparams)
+{
+       struct rte_crypto_op **op_buffer;
+       unsigned ret;
+
+       op_buffer = (struct rte_crypto_op **)
+                       qconf->op_buf[cparams->dev_id].buffer;
+
+       ret = rte_cryptodev_enqueue_burst(cparams->dev_id,
+                       cparams->qp_id, op_buffer, (uint16_t) n);
+
+       crypto_statistics[cparams->dev_id].enqueued += ret;
+       if (unlikely(ret < n)) {
+               crypto_statistics[cparams->dev_id].errors += (n - ret);
+               do {
+                       rte_pktmbuf_free(op_buffer[ret]->sym->m_src);
+                       rte_crypto_op_free(op_buffer[ret]);
+               } while (++ret < n);
+       }
+
+       return 0;
+}
+
+static int
+l2fwd_crypto_enqueue(struct rte_crypto_op *op,
+               struct l2fwd_crypto_params *cparams)
+{
+       unsigned lcore_id, len;
+       struct lcore_queue_conf *qconf;
+
+       lcore_id = rte_lcore_id();
+
+       qconf = &lcore_queue_conf[lcore_id];
+       len = qconf->op_buf[cparams->dev_id].len;
+       qconf->op_buf[cparams->dev_id].buffer[len] = op;
+       len++;
+
+       /* enough ops to be sent */
+       if (len == MAX_PKT_BURST) {
+               l2fwd_crypto_send_burst(qconf, MAX_PKT_BURST, cparams);
+               len = 0;
+       }
+
+       qconf->op_buf[cparams->dev_id].len = len;
+       return 0;
+}
+
+static int
+l2fwd_simple_crypto_enqueue(struct rte_mbuf *m,
+               struct rte_crypto_op *op,
+               struct l2fwd_crypto_params *cparams)
+{
+       struct ether_hdr *eth_hdr;
+       struct ipv4_hdr *ip_hdr;
+
+       unsigned ipdata_offset, pad_len, data_len;
+       char *padding;
+
+       eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+       if (eth_hdr->ether_type != rte_cpu_to_be_16(ETHER_TYPE_IPv4))
+               return -1;
+
+       ipdata_offset = sizeof(struct ether_hdr);
+
+       ip_hdr = (struct ipv4_hdr *)(rte_pktmbuf_mtod(m, char *) +
+                       ipdata_offset);
+
+       ipdata_offset += (ip_hdr->version_ihl & IPV4_HDR_IHL_MASK)
+                       * IPV4_IHL_MULTIPLIER;
+
+
+       /* Zero pad data to be crypto'd so it is block aligned */
+       data_len  = rte_pktmbuf_data_len(m) - ipdata_offset;
+       pad_len = data_len % cparams->block_size ? cparams->block_size -
+                       (data_len % cparams->block_size) : 0;
+
+       if (pad_len) {
+               padding = rte_pktmbuf_append(m, pad_len);
+               if (unlikely(!padding))
+                       return -1;
+
+               data_len += pad_len;
+               memset(padding, 0, pad_len);
+       }
+
+       /* Set crypto operation data parameters */
+       rte_crypto_op_attach_sym_session(op, cparams->session);
+
+       if (cparams->do_hash) {
+               if (!cparams->hash_verify) {
+                       /* Append space for digest to end of packet */
+                       op->sym->auth.digest.data = (uint8_t *)rte_pktmbuf_append(m,
+                               cparams->digest_length);
+               } else {
+                       op->sym->auth.digest.data = (uint8_t *)rte_pktmbuf_append(m,
+                               cparams->digest_length);
+               }
+
+               op->sym->auth.digest.phys_addr = rte_pktmbuf_mtophys_offset(m,
+                               rte_pktmbuf_pkt_len(m) - cparams->digest_length);
+               op->sym->auth.digest.length = cparams->digest_length;
+
+               /* For SNOW3G algorithms, offset/length must be in bits */
+               if (cparams->auth_algo == RTE_CRYPTO_AUTH_SNOW3G_UIA2) {
+                       op->sym->auth.data.offset = ipdata_offset << 3;
+                       op->sym->auth.data.length = data_len << 3;
+               } else {
+                       op->sym->auth.data.offset = ipdata_offset;
+                       op->sym->auth.data.length = data_len;
+               }
+
+               if (cparams->aad.length) {
+                       op->sym->auth.aad.data = cparams->aad.data;
+                       op->sym->auth.aad.phys_addr = cparams->aad.phys_addr;
+                       op->sym->auth.aad.length = cparams->aad.length;
+               }
+       }
+
+       if (cparams->do_cipher) {
+               op->sym->cipher.iv.data = cparams->iv.data;
+               op->sym->cipher.iv.phys_addr = cparams->iv.phys_addr;
+               op->sym->cipher.iv.length = cparams->iv.length;
+
+               /* For SNOW3G algorithms, offset/length must be in bits */
+               if (cparams->cipher_algo == RTE_CRYPTO_CIPHER_SNOW3G_UEA2) {
+                       op->sym->cipher.data.offset = ipdata_offset << 3;
+                       if (cparams->do_hash && cparams->hash_verify)
+                               /* Do not cipher the hash tag */
+                               op->sym->cipher.data.length = (data_len -
+                                       cparams->digest_length) << 3;
+                       else
+                               op->sym->cipher.data.length = data_len << 3;
+
+               } else {
+                       op->sym->cipher.data.offset = ipdata_offset;
+                       if (cparams->do_hash && cparams->hash_verify)
+                               /* Do not cipher the hash tag */
+                               op->sym->cipher.data.length = data_len -
+                                       cparams->digest_length;
+                       else
+                               op->sym->cipher.data.length = data_len;
+               }
+       }
+
+       op->sym->m_src = m;
+
+       return l2fwd_crypto_enqueue(op, cparams);
+}
+
+
+/* Send the burst of packets on an output interface */
+static int
+l2fwd_send_burst(struct lcore_queue_conf *qconf, unsigned n,
+               uint8_t port)
+{
+       struct rte_mbuf **pkt_buffer;
+       unsigned ret;
+
+       pkt_buffer = (struct rte_mbuf **)qconf->pkt_buf[port].buffer;
+
+       ret = rte_eth_tx_burst(port, 0, pkt_buffer, (uint16_t)n);
+       port_statistics[port].tx += ret;
+       if (unlikely(ret < n)) {
+               port_statistics[port].dropped += (n - ret);
+               do {
+                       rte_pktmbuf_free(pkt_buffer[ret]);
+               } while (++ret < n);
+       }
+
+       return 0;
+}
+
+/* Enqueue packets for TX and prepare them to be sent */
+static int
+l2fwd_send_packet(struct rte_mbuf *m, uint8_t port)
+{
+       unsigned lcore_id, len;
+       struct lcore_queue_conf *qconf;
+
+       lcore_id = rte_lcore_id();
+
+       qconf = &lcore_queue_conf[lcore_id];
+       len = qconf->pkt_buf[port].len;
+       qconf->pkt_buf[port].buffer[len] = m;
+       len++;
+
+       /* enough pkts to be sent */
+       if (unlikely(len == MAX_PKT_BURST)) {
+               l2fwd_send_burst(qconf, MAX_PKT_BURST, port);
+               len = 0;
+       }
+
+       qconf->pkt_buf[port].len = len;
+       return 0;
+}
+
+static void
+l2fwd_simple_forward(struct rte_mbuf *m, unsigned portid)
+{
+       struct ether_hdr *eth;
+       void *tmp;
+       unsigned dst_port;
+
+       dst_port = l2fwd_dst_ports[portid];
+       eth = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+       /* 02:00:00:00:00:xx */
+       tmp = &eth->d_addr.addr_bytes[0];
+       *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
+
+       /* src addr */
+       ether_addr_copy(&l2fwd_ports_eth_addr[dst_port], &eth->s_addr);
+
+       l2fwd_send_packet(m, (uint8_t) dst_port);
+}
+
+/** Generate random key */
+static void
+generate_random_key(uint8_t *key, unsigned length)
+{
+       unsigned i;
+
+       for (i = 0; i < length; i++)
+               key[i] = rand() % 0xff;
+}
+
+static struct rte_cryptodev_sym_session *
+initialize_crypto_session(struct l2fwd_crypto_options *options,
+               uint8_t cdev_id)
+{
+       struct rte_crypto_sym_xform *first_xform;
+
+       if (options->xform_chain == L2FWD_CRYPTO_CIPHER_HASH) {
+               first_xform = &options->cipher_xform;
+               first_xform->next = &options->auth_xform;
+       } else if (options->xform_chain == L2FWD_CRYPTO_HASH_CIPHER) {
+               first_xform = &options->auth_xform;
+               first_xform->next = &options->cipher_xform;
+       } else if (options->xform_chain == L2FWD_CRYPTO_CIPHER_ONLY) {
+               first_xform = &options->cipher_xform;
+       } else {
+               first_xform = &options->auth_xform;
+       }
+
+       /* Setup Cipher Parameters */
+       return rte_cryptodev_sym_session_create(cdev_id, first_xform);
+}
+
+static void
+l2fwd_crypto_options_print(struct l2fwd_crypto_options *options);
+
+/* main processing loop */
+static void
+l2fwd_main_loop(struct l2fwd_crypto_options *options)
+{
+       struct rte_mbuf *m, *pkts_burst[MAX_PKT_BURST];
+       struct rte_crypto_op *ops_burst[MAX_PKT_BURST];
+
+       unsigned lcore_id = rte_lcore_id();
+       uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
+       unsigned i, j, portid, nb_rx;
+       struct lcore_queue_conf *qconf = &lcore_queue_conf[lcore_id];
+       const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
+                       US_PER_S * BURST_TX_DRAIN_US;
+       struct l2fwd_crypto_params *cparams;
+       struct l2fwd_crypto_params port_cparams[qconf->nb_crypto_devs];
+
+       if (qconf->nb_rx_ports == 0) {
+               RTE_LOG(INFO, L2FWD, "lcore %u has nothing to do\n", lcore_id);
+               return;
+       }
+
+       RTE_LOG(INFO, L2FWD, "entering main loop on lcore %u\n", lcore_id);
+
+       for (i = 0; i < qconf->nb_rx_ports; i++) {
+
+               portid = qconf->rx_port_list[i];
+               RTE_LOG(INFO, L2FWD, " -- lcoreid=%u portid=%u\n", lcore_id,
+                       portid);
+       }
+
+       for (i = 0; i < qconf->nb_crypto_devs; i++) {
+               port_cparams[i].do_cipher = 0;
+               port_cparams[i].do_hash = 0;
+
+               switch (options->xform_chain) {
+               case L2FWD_CRYPTO_CIPHER_HASH:
+               case L2FWD_CRYPTO_HASH_CIPHER:
+                       port_cparams[i].do_cipher = 1;
+                       port_cparams[i].do_hash = 1;
+                       break;
+               case L2FWD_CRYPTO_HASH_ONLY:
+                       port_cparams[i].do_hash = 1;
+                       break;
+               case L2FWD_CRYPTO_CIPHER_ONLY:
+                       port_cparams[i].do_cipher = 1;
+                       break;
+               }
+
+               port_cparams[i].dev_id = qconf->cryptodev_list[i];
+               port_cparams[i].qp_id = 0;
+
+               port_cparams[i].block_size = options->block_size;
+
+               if (port_cparams[i].do_hash) {
+                       port_cparams[i].digest_length =
+                                       options->auth_xform.auth.digest_length;
+                       if (options->auth_xform.auth.add_auth_data_length) {
+                               port_cparams[i].aad.data = options->aad.data;
+                               port_cparams[i].aad.length =
+                                       options->auth_xform.auth.add_auth_data_length;
+                               port_cparams[i].aad.phys_addr = options->aad.phys_addr;
+                               if (!options->aad_param)
+                                       generate_random_key(port_cparams[i].aad.data,
+                                               port_cparams[i].aad.length);
+
+                       }
+
+                       if (options->auth_xform.auth.op == RTE_CRYPTO_AUTH_OP_VERIFY)
+                               port_cparams[i].hash_verify = 1;
+                       else
+                               port_cparams[i].hash_verify = 0;
+
+                       port_cparams[i].auth_algo = options->auth_xform.auth.algo;
+               }
+
+               if (port_cparams[i].do_cipher) {
+                       port_cparams[i].iv.data = options->iv.data;
+                       port_cparams[i].iv.length = options->iv.length;
+                       port_cparams[i].iv.phys_addr = options->iv.phys_addr;
+                       if (!options->iv_param)
+                               generate_random_key(port_cparams[i].iv.data,
+                                               port_cparams[i].iv.length);
+
+                       port_cparams[i].cipher_algo = options->cipher_xform.cipher.algo;
+               }
+
+               port_cparams[i].session = initialize_crypto_session(options,
+                               port_cparams[i].dev_id);
+
+               if (port_cparams[i].session == NULL)
+                       return;
+               RTE_LOG(INFO, L2FWD, " -- lcoreid=%u cryptoid=%u\n", lcore_id,
+                               port_cparams[i].dev_id);
+       }
+
+       l2fwd_crypto_options_print(options);
+
+       /*
+        * Initialize previous tsc timestamp before the loop,
+        * to avoid showing the port statistics immediately,
+        * so user can see the crypto information.
+        */
+       prev_tsc = rte_rdtsc();
+       while (1) {
+
+               cur_tsc = rte_rdtsc();
+
+               /*
+                * TX burst queue drain
+                */
+               diff_tsc = cur_tsc - prev_tsc;
+               if (unlikely(diff_tsc > drain_tsc)) {
+                       for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+                               if (qconf->pkt_buf[portid].len == 0)
+                                       continue;
+                               l2fwd_send_burst(&lcore_queue_conf[lcore_id],
+                                                qconf->pkt_buf[portid].len,
+                                                (uint8_t) portid);
+                               qconf->pkt_buf[portid].len = 0;
+                       }
+
+                       /* if timer is enabled */
+                       if (timer_period > 0) {
+
+                               /* advance the timer */
+                               timer_tsc += diff_tsc;
+
+                               /* if timer has reached its timeout */
+                               if (unlikely(timer_tsc >=
+                                               (uint64_t)timer_period)) {
+
+                                       /* do this only on master core */
+                                       if (lcore_id == rte_get_master_lcore()
+                                               && options->refresh_period) {
+                                               print_stats();
+                                               timer_tsc = 0;
+                                       }
+                               }
+                       }
+
+                       prev_tsc = cur_tsc;
+               }
+
+               /*
+                * Read packet from RX queues
+                */
+               for (i = 0; i < qconf->nb_rx_ports; i++) {
+                       portid = qconf->rx_port_list[i];
+
+                       cparams = &port_cparams[i];
+
+                       nb_rx = rte_eth_rx_burst((uint8_t) portid, 0,
+                                                pkts_burst, MAX_PKT_BURST);
+
+                       port_statistics[portid].rx += nb_rx;
+
+                       if (nb_rx) {
+                               /*
+                                * If we can't allocate a crypto_ops, then drop
+                                * the rest of the burst and dequeue and
+                                * process the packets to free offload structs
+                                */
+                               if (rte_crypto_op_bulk_alloc(
+                                               l2fwd_crypto_op_pool,
+                                               RTE_CRYPTO_OP_TYPE_SYMMETRIC,
+                                               ops_burst, nb_rx) !=
+                                                               nb_rx) {
+                                       for (j = 0; j < nb_rx; j++)
+                                               rte_pktmbuf_free(pkts_burst[i]);
+
+                                       nb_rx = 0;
+                               }
+
+                               /* Enqueue packets from Crypto device*/
+                               for (j = 0; j < nb_rx; j++) {
+                                       m = pkts_burst[j];
+
+                                       l2fwd_simple_crypto_enqueue(m,
+                                                       ops_burst[j], cparams);
+                               }
+                       }
+
+                       /* Dequeue packets from Crypto device */
+                       do {
+                               nb_rx = rte_cryptodev_dequeue_burst(
+                                               cparams->dev_id, cparams->qp_id,
+                                               ops_burst, MAX_PKT_BURST);
+
+                               crypto_statistics[cparams->dev_id].dequeued +=
+                                               nb_rx;
+
+                               /* Forward crypto'd packets */
+                               for (j = 0; j < nb_rx; j++) {
+                                       m = ops_burst[j]->sym->m_src;
+
+                                       rte_crypto_op_free(ops_burst[j]);
+                                       l2fwd_simple_forward(m, portid);
+                               }
+                       } while (nb_rx == MAX_PKT_BURST);
+               }
+       }
+}
+
+static int
+l2fwd_launch_one_lcore(void *arg)
+{
+       l2fwd_main_loop((struct l2fwd_crypto_options *)arg);
+       return 0;
+}
+
+/* Display command line arguments usage */
+static void
+l2fwd_crypto_usage(const char *prgname)
+{
+       printf("%s [EAL options] --\n"
+               "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
+               "  -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+               "  -s manage all ports from single lcore\n"
+               "  -T PERIOD: statistics will be refreshed each PERIOD seconds"
+               " (0 to disable, 10 default, 86400 maximum)\n"
+
+               "  --cdev_type HW / SW / ANY\n"
+               "  --chain HASH_CIPHER / CIPHER_HASH\n"
+
+               "  --cipher_algo ALGO\n"
+               "  --cipher_op ENCRYPT / DECRYPT\n"
+               "  --cipher_key KEY (bytes separated with \":\")\n"
+               "  --cipher_key_random_size SIZE: size of cipher key when generated randomly\n"
+               "  --iv IV (bytes separated with \":\")\n"
+               "  --iv_random_size SIZE: size of IV when generated randomly\n"
+
+               "  --auth_algo ALGO\n"
+               "  --auth_op GENERATE / VERIFY\n"
+               "  --auth_key KEY (bytes separated with \":\")\n"
+               "  --auth_key_random_size SIZE: size of auth key when generated randomly\n"
+               "  --aad AAD (bytes separated with \":\")\n"
+               "  --aad_random_size SIZE: size of AAD when generated randomly\n"
+               "  --digest_size SIZE: size of digest to be generated/verified\n"
+
+               "  --sessionless\n",
+              prgname);
+}
+
+/** Parse crypto device type command line argument */
+static int
+parse_cryptodev_type(enum cdev_type *type, char *optarg)
+{
+       if (strcmp("HW", optarg) == 0) {
+               *type = CDEV_TYPE_HW;
+               return 0;
+       } else if (strcmp("SW", optarg) == 0) {
+               *type = CDEV_TYPE_SW;
+               return 0;
+       } else if (strcmp("ANY", optarg) == 0) {
+               *type = CDEV_TYPE_ANY;
+               return 0;
+       }
+
+       return -1;
+}
+
+/** Parse crypto chain xform command line argument */
+static int
+parse_crypto_opt_chain(struct l2fwd_crypto_options *options, char *optarg)
+{
+       if (strcmp("CIPHER_HASH", optarg) == 0) {
+               options->xform_chain = L2FWD_CRYPTO_CIPHER_HASH;
+               return 0;
+       } else if (strcmp("HASH_CIPHER", optarg) == 0) {
+               options->xform_chain = L2FWD_CRYPTO_HASH_CIPHER;
+               return 0;
+       } else if (strcmp("CIPHER_ONLY", optarg) == 0) {
+               options->xform_chain = L2FWD_CRYPTO_CIPHER_ONLY;
+               return 0;
+       } else if (strcmp("HASH_ONLY", optarg) == 0) {
+               options->xform_chain = L2FWD_CRYPTO_HASH_ONLY;
+               return 0;
+       }
+
+       return -1;
+}
+
+/** Parse crypto cipher algo option command line argument */
+static int
+parse_cipher_algo(enum rte_crypto_cipher_algorithm *algo, char *optarg)
+{
+       unsigned i;
+
+       for (i = 0; i < RTE_CRYPTO_CIPHER_LIST_END; i++) {
+               if (!strcmp(supported_cipher_algo[i], optarg)) {
+                       *algo = (enum rte_crypto_cipher_algorithm)i;
+                       return 0;
+               }
+       }
+
+       printf("Cipher algorithm  not supported!\n");
+       return -1;
+}
+
+/** Parse crypto cipher operation command line argument */
+static int
+parse_cipher_op(enum rte_crypto_cipher_operation *op, char *optarg)
+{
+       if (strcmp("ENCRYPT", optarg) == 0) {
+               *op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+               return 0;
+       } else if (strcmp("DECRYPT", optarg) == 0) {
+               *op = RTE_CRYPTO_CIPHER_OP_DECRYPT;
+               return 0;
+       }
+
+       printf("Cipher operation not supported!\n");
+       return -1;
+}
+
+/** Parse crypto key command line argument */
+static int
+parse_key(uint8_t *data, char *input_arg)
+{
+       unsigned byte_count;
+       char *token;
+
+       for (byte_count = 0, token = strtok(input_arg, ":");
+                       (byte_count < MAX_KEY_SIZE) && (token != NULL);
+                       token = strtok(NULL, ":")) {
+
+               int number = (int)strtol(token, NULL, 16);
+
+               if (errno == EINVAL || errno == ERANGE || number > 0xFF)
+                       return -1;
+
+               data[byte_count++] = (uint8_t)number;
+       }
+
+       return byte_count;
+}
+
+/** Parse size param*/
+static int
+parse_size(int *size, const char *q_arg)
+{
+       char *end = NULL;
+       unsigned long n;
+
+       /* parse hexadecimal string */
+       n = strtoul(q_arg, &end, 10);
+       if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+               n = 0;
+
+       if (n == 0) {
+               printf("invalid size\n");
+               return -1;
+       }
+
+       *size = n;
+       return 0;
+}
+
+/** Parse crypto cipher operation command line argument */
+static int
+parse_auth_algo(enum rte_crypto_auth_algorithm *algo, char *optarg)
+{
+       unsigned i;
+
+       for (i = 0; i < RTE_CRYPTO_AUTH_LIST_END; i++) {
+               if (!strcmp(supported_auth_algo[i], optarg)) {
+                       *algo = (enum rte_crypto_auth_algorithm)i;
+                       return 0;
+               }
+       }
+
+       printf("Authentication algorithm specified not supported!\n");
+       return -1;
+}
+
+static int
+parse_auth_op(enum rte_crypto_auth_operation *op, char *optarg)
+{
+       if (strcmp("VERIFY", optarg) == 0) {
+               *op = RTE_CRYPTO_AUTH_OP_VERIFY;
+               return 0;
+       } else if (strcmp("GENERATE", optarg) == 0) {
+               *op = RTE_CRYPTO_AUTH_OP_GENERATE;
+               return 0;
+       }
+
+       printf("Authentication operation specified not supported!\n");
+       return -1;
+}
+
+/** Parse long options */
+static int
+l2fwd_crypto_parse_args_long_options(struct l2fwd_crypto_options *options,
+               struct option *lgopts, int option_index)
+{
+       int retval;
+
+       if (strcmp(lgopts[option_index].name, "cdev_type") == 0) {
+               retval = parse_cryptodev_type(&options->type, optarg);
+               if (retval == 0)
+                       snprintf(options->string_type, MAX_STR_LEN,
+                               "%s", optarg);
+               return retval;
+       }
+
+       else if (strcmp(lgopts[option_index].name, "chain") == 0)
+               return parse_crypto_opt_chain(options, optarg);
+
+       /* Cipher options */
+       else if (strcmp(lgopts[option_index].name, "cipher_algo") == 0)
+               return parse_cipher_algo(&options->cipher_xform.cipher.algo,
+                               optarg);
+
+       else if (strcmp(lgopts[option_index].name, "cipher_op") == 0)
+               return parse_cipher_op(&options->cipher_xform.cipher.op,
+                               optarg);
+
+       else if (strcmp(lgopts[option_index].name, "cipher_key") == 0) {
+               options->ckey_param = 1;
+               options->cipher_xform.cipher.key.length =
+                       parse_key(options->cipher_xform.cipher.key.data, optarg);
+               if (options->cipher_xform.cipher.key.length > 0)
+                       return 0;
+               else
+                       return -1;
+       }
+
+       else if (strcmp(lgopts[option_index].name, "cipher_key_random_size") == 0)
+               return parse_size(&options->ckey_random_size, optarg);
+
+       else if (strcmp(lgopts[option_index].name, "iv") == 0) {
+               options->iv_param = 1;
+               options->iv.length =
+                       parse_key(options->iv.data, optarg);
+               if (options->iv.length > 0)
+                       return 0;
+               else
+                       return -1;
+       }
+
+       else if (strcmp(lgopts[option_index].name, "iv_random_size") == 0)
+               return parse_size(&options->iv_random_size, optarg);
+
+       /* Authentication options */
+       else if (strcmp(lgopts[option_index].name, "auth_algo") == 0) {
+               return parse_auth_algo(&options->auth_xform.auth.algo,
+                               optarg);
+       }
+
+       else if (strcmp(lgopts[option_index].name, "auth_op") == 0)
+               return parse_auth_op(&options->auth_xform.auth.op,
+                               optarg);
+
+       else if (strcmp(lgopts[option_index].name, "auth_key") == 0) {
+               options->akey_param = 1;
+               options->auth_xform.auth.key.length =
+                       parse_key(options->auth_xform.auth.key.data, optarg);
+               if (options->auth_xform.auth.key.length > 0)
+                       return 0;
+               else
+                       return -1;
+       }
+
+       else if (strcmp(lgopts[option_index].name, "auth_key_random_size") == 0) {
+               return parse_size(&options->akey_random_size, optarg);
+       }
+
+       else if (strcmp(lgopts[option_index].name, "aad") == 0) {
+               options->aad_param = 1;
+               options->aad.length =
+                       parse_key(options->aad.data, optarg);
+               if (options->aad.length > 0)
+                       return 0;
+               else
+                       return -1;
+       }
+
+       else if (strcmp(lgopts[option_index].name, "aad_random_size") == 0) {
+               return parse_size(&options->aad_random_size, optarg);
+       }
+
+       else if (strcmp(lgopts[option_index].name, "digest_size") == 0) {
+               return parse_size(&options->digest_size, optarg);
+       }
+
+       else if (strcmp(lgopts[option_index].name, "sessionless") == 0) {
+               options->sessionless = 1;
+               return 0;
+       }
+
+       return -1;
+}
+
+/** Parse port mask */
+static int
+l2fwd_crypto_parse_portmask(struct l2fwd_crypto_options *options,
+               const char *q_arg)
+{
+       char *end = NULL;
+       unsigned long pm;
+
+       /* parse hexadecimal string */
+       pm = strtoul(q_arg, &end, 16);
+       if ((pm == '\0') || (end == NULL) || (*end != '\0'))
+               pm = 0;
+
+       options->portmask = pm;
+       if (options->portmask == 0) {
+               printf("invalid portmask specified\n");
+               return -1;
+       }
+
+       return pm;
+}
+
+/** Parse number of queues */
+static int
+l2fwd_crypto_parse_nqueue(struct l2fwd_crypto_options *options,
+               const char *q_arg)
+{
+       char *end = NULL;
+       unsigned long n;
+
+       /* parse hexadecimal string */
+       n = strtoul(q_arg, &end, 10);
+       if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+               n = 0;
+       else if (n >= MAX_RX_QUEUE_PER_LCORE)
+               n = 0;
+
+       options->nb_ports_per_lcore = n;
+       if (options->nb_ports_per_lcore == 0) {
+               printf("invalid number of ports selected\n");
+               return -1;
+       }
+
+       return 0;
+}
+
+/** Parse timer period */
+static int
+l2fwd_crypto_parse_timer_period(struct l2fwd_crypto_options *options,
+               const char *q_arg)
+{
+       char *end = NULL;
+       unsigned long n;
+
+       /* parse number string */
+       n = (unsigned)strtol(q_arg, &end, 10);
+       if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+               n = 0;
+
+       if (n >= MAX_TIMER_PERIOD) {
+               printf("Warning refresh period specified %lu is greater than "
+                               "max value %lu! using max value",
+                               n, MAX_TIMER_PERIOD);
+               n = MAX_TIMER_PERIOD;
+       }
+
+       options->refresh_period = n * 1000 * TIMER_MILLISECOND;
+
+       return 0;
+}
+
+/** Generate default options for application */
+static void
+l2fwd_crypto_default_options(struct l2fwd_crypto_options *options)
+{
+       srand(time(NULL));
+
+       options->portmask = 0xffffffff;
+       options->nb_ports_per_lcore = 1;
+       options->refresh_period = 10000;
+       options->single_lcore = 0;
+       options->sessionless = 0;
+
+       options->xform_chain = L2FWD_CRYPTO_CIPHER_HASH;
+
+       /* Cipher Data */
+       options->cipher_xform.type = RTE_CRYPTO_SYM_XFORM_CIPHER;
+       options->cipher_xform.next = NULL;
+       options->ckey_param = 0;
+       options->ckey_random_size = -1;
+       options->cipher_xform.cipher.key.length = 0;
+       options->iv_param = 0;
+       options->iv_random_size = -1;
+       options->iv.length = 0;
+
+       options->cipher_xform.cipher.algo = RTE_CRYPTO_CIPHER_AES_CBC;
+       options->cipher_xform.cipher.op = RTE_CRYPTO_CIPHER_OP_ENCRYPT;
+
+       /* Authentication Data */
+       options->auth_xform.type = RTE_CRYPTO_SYM_XFORM_AUTH;
+       options->auth_xform.next = NULL;
+       options->akey_param = 0;
+       options->akey_random_size = -1;
+       options->auth_xform.auth.key.length = 0;
+       options->aad_param = 0;
+       options->aad_random_size = -1;
+       options->aad.length = 0;
+       options->digest_size = -1;
+
+       options->auth_xform.auth.algo = RTE_CRYPTO_AUTH_SHA1_HMAC;
+       options->auth_xform.auth.op = RTE_CRYPTO_AUTH_OP_GENERATE;
+
+       options->type = CDEV_TYPE_ANY;
+}
+
+static void
+display_cipher_info(struct l2fwd_crypto_options *options)
+{
+       printf("\n---- Cipher information ---\n");
+       printf("Algorithm: %s\n",
+               supported_cipher_algo[options->cipher_xform.cipher.algo]);
+       rte_hexdump(stdout, "Cipher key:",
+                       options->cipher_xform.cipher.key.data,
+                       options->cipher_xform.cipher.key.length);
+       rte_hexdump(stdout, "IV:", options->iv.data, options->iv.length);
+}
+
+static void
+display_auth_info(struct l2fwd_crypto_options *options)
+{
+       printf("\n---- Authentication information ---\n");
+       printf("Algorithm: %s\n",
+               supported_auth_algo[options->auth_xform.auth.algo]);
+       rte_hexdump(stdout, "Auth key:",
+                       options->auth_xform.auth.key.data,
+                       options->auth_xform.auth.key.length);
+       rte_hexdump(stdout, "AAD:", options->aad.data, options->aad.length);
+}
+
+static void
+l2fwd_crypto_options_print(struct l2fwd_crypto_options *options)
+{
+       char string_cipher_op[MAX_STR_LEN];
+       char string_auth_op[MAX_STR_LEN];
+
+       if (options->cipher_xform.cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+               strcpy(string_cipher_op, "Encrypt");
+       else
+               strcpy(string_cipher_op, "Decrypt");
+
+       if (options->auth_xform.auth.op == RTE_CRYPTO_AUTH_OP_GENERATE)
+               strcpy(string_auth_op, "Auth generate");
+       else
+               strcpy(string_auth_op, "Auth verify");
+
+       printf("Options:-\nn");
+       printf("portmask: %x\n", options->portmask);
+       printf("ports per lcore: %u\n", options->nb_ports_per_lcore);
+       printf("refresh period : %u\n", options->refresh_period);
+       printf("single lcore mode: %s\n",
+                       options->single_lcore ? "enabled" : "disabled");
+       printf("stats_printing: %s\n",
+                       options->refresh_period == 0 ? "disabled" : "enabled");
+
+       printf("sessionless crypto: %s\n",
+                       options->sessionless ? "enabled" : "disabled");
+
+       if (options->ckey_param && (options->ckey_random_size != -1))
+               printf("Cipher key already parsed, ignoring size of random key\n");
+
+       if (options->akey_param && (options->akey_random_size != -1))
+               printf("Auth key already parsed, ignoring size of random key\n");
+
+       if (options->iv_param && (options->iv_random_size != -1))
+               printf("IV already parsed, ignoring size of random IV\n");
+
+       if (options->aad_param && (options->aad_random_size != -1))
+               printf("AAD already parsed, ignoring size of random AAD\n");
+
+       printf("\nCrypto chain: ");
+       switch (options->xform_chain) {
+       case L2FWD_CRYPTO_CIPHER_HASH:
+               printf("Input --> %s --> %s --> Output\n",
+                       string_cipher_op, string_auth_op);
+               display_cipher_info(options);
+               display_auth_info(options);
+               break;
+       case L2FWD_CRYPTO_HASH_CIPHER:
+               printf("Input --> %s --> %s --> Output\n",
+                       string_auth_op, string_cipher_op);
+               display_cipher_info(options);
+               display_auth_info(options);
+               break;
+       case L2FWD_CRYPTO_HASH_ONLY:
+               printf("Input --> %s --> Output\n", string_auth_op);
+               display_auth_info(options);
+               break;
+       case L2FWD_CRYPTO_CIPHER_ONLY:
+               printf("Input --> %s --> Output\n", string_cipher_op);
+               display_cipher_info(options);
+               break;
+       }
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+l2fwd_crypto_parse_args(struct l2fwd_crypto_options *options,
+               int argc, char **argv)
+{
+       int opt, retval, option_index;
+       char **argvopt = argv, *prgname = argv[0];
+
+       static struct option lgopts[] = {
+                       { "sessionless", no_argument, 0, 0 },
+
+                       { "cdev_type", required_argument, 0, 0 },
+                       { "chain", required_argument, 0, 0 },
+
+                       { "cipher_algo", required_argument, 0, 0 },
+                       { "cipher_op", required_argument, 0, 0 },
+                       { "cipher_key", required_argument, 0, 0 },
+                       { "cipher_key_random_size", required_argument, 0, 0 },
+
+                       { "auth_algo", required_argument, 0, 0 },
+                       { "auth_op", required_argument, 0, 0 },
+                       { "auth_key", required_argument, 0, 0 },
+                       { "auth_key_random_size", required_argument, 0, 0 },
+
+                       { "iv", required_argument, 0, 0 },
+                       { "iv_random_size", required_argument, 0, 0 },
+                       { "aad", required_argument, 0, 0 },
+                       { "aad_random_size", required_argument, 0, 0 },
+                       { "digest_size", required_argument, 0, 0 },
+
+                       { "sessionless", no_argument, 0, 0 },
+
+                       { NULL, 0, 0, 0 }
+       };
+
+       l2fwd_crypto_default_options(options);
+
+       while ((opt = getopt_long(argc, argvopt, "p:q:st:", lgopts,
+                       &option_index)) != EOF) {
+               switch (opt) {
+               /* long options */
+               case 0:
+                       retval = l2fwd_crypto_parse_args_long_options(options,
+                                       lgopts, option_index);
+                       if (retval < 0) {
+                               l2fwd_crypto_usage(prgname);
+                               return -1;
+                       }
+                       break;
+
+               /* portmask */
+               case 'p':
+                       retval = l2fwd_crypto_parse_portmask(options, optarg);
+                       if (retval < 0) {
+                               l2fwd_crypto_usage(prgname);
+                               return -1;
+                       }
+                       break;
+
+               /* nqueue */
+               case 'q':
+                       retval = l2fwd_crypto_parse_nqueue(options, optarg);
+                       if (retval < 0) {
+                               l2fwd_crypto_usage(prgname);
+                               return -1;
+                       }
+                       break;
+
+               /* single  */
+               case 's':
+                       options->single_lcore = 1;
+
+                       break;
+
+               /* timer period */
+               case 'T':
+                       retval = l2fwd_crypto_parse_timer_period(options,
+                                       optarg);
+                       if (retval < 0) {
+                               l2fwd_crypto_usage(prgname);
+                               return -1;
+                       }
+                       break;
+
+               default:
+                       l2fwd_crypto_usage(prgname);
+                       return -1;
+               }
+       }
+
+
+       if (optind >= 0)
+               argv[optind-1] = prgname;
+
+       retval = optind-1;
+       optind = 0; /* reset getopt lib */
+
+       return retval;
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+       uint8_t portid, count, all_ports_up, print_flag = 0;
+       struct rte_eth_link link;
+
+       printf("\nChecking link status");
+       fflush(stdout);
+       for (count = 0; count <= MAX_CHECK_TIME; count++) {
+               all_ports_up = 1;
+               for (portid = 0; portid < port_num; portid++) {
+                       if ((port_mask & (1 << portid)) == 0)
+                               continue;
+                       memset(&link, 0, sizeof(link));
+                       rte_eth_link_get_nowait(portid, &link);
+                       /* print link status if flag set */
+                       if (print_flag == 1) {
+                               if (link.link_status)
+                                       printf("Port %d Link Up - speed %u "
+                                               "Mbps - %s\n", (uint8_t)portid,
+                                               (unsigned)link.link_speed,
+                               (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+                                       ("full-duplex") : ("half-duplex\n"));
+                               else
+                                       printf("Port %d Link Down\n",
+                                               (uint8_t)portid);
+                               continue;
+                       }
+                       /* clear all_ports_up flag if any link down */
+                       if (link.link_status == ETH_LINK_DOWN) {
+                               all_ports_up = 0;
+                               break;
+                       }
+               }
+               /* after finally printing all link status, get out */
+               if (print_flag == 1)
+                       break;
+
+               if (all_ports_up == 0) {
+                       printf(".");
+                       fflush(stdout);
+                       rte_delay_ms(CHECK_INTERVAL);
+               }
+
+               /* set the print_flag if all ports up or timeout */
+               if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+                       print_flag = 1;
+                       printf("done\n");
+               }
+       }
+}
+
+/* Check if device has to be HW/SW or any */
+static int
+check_type(struct l2fwd_crypto_options *options, struct rte_cryptodev_info *dev_info)
+{
+       if (options->type == CDEV_TYPE_HW &&
+                       (dev_info->feature_flags & RTE_CRYPTODEV_FF_HW_ACCELERATED))
+               return 0;
+       if (options->type == CDEV_TYPE_SW &&
+                       !(dev_info->feature_flags & RTE_CRYPTODEV_FF_HW_ACCELERATED))
+               return 0;
+       if (options->type == CDEV_TYPE_ANY)
+               return 0;
+
+       return -1;
+}
+
+static inline int
+check_supported_size(uint16_t length, uint16_t min, uint16_t max,
+               uint16_t increment)
+{
+       uint16_t supp_size;
+
+       for (supp_size = min; supp_size <= max; supp_size += increment) {
+               if (length == supp_size)
+                       return 0;
+       }
+
+       return -1;
+}
+static int
+initialize_cryptodevs(struct l2fwd_crypto_options *options, unsigned nb_ports,
+               uint8_t *enabled_cdevs)
+{
+       unsigned i, cdev_id, cdev_count, enabled_cdev_count = 0;
+       const struct rte_cryptodev_capabilities *cap;
+       enum rte_crypto_auth_algorithm cap_auth_algo;
+       enum rte_crypto_auth_algorithm opt_auth_algo;
+       enum rte_crypto_cipher_algorithm cap_cipher_algo;
+       enum rte_crypto_cipher_algorithm opt_cipher_algo;
+       int retval;
+
+       cdev_count = rte_cryptodev_count();
+       if (cdev_count == 0) {
+               printf("No crypto devices available\n");
+               return -1;
+       }
+
+       for (cdev_id = 0; cdev_id < cdev_count && enabled_cdev_count < nb_ports;
+                       cdev_id++) {
+               struct rte_cryptodev_qp_conf qp_conf;
+               struct rte_cryptodev_info dev_info;
+
+               struct rte_cryptodev_config conf = {
+                       .nb_queue_pairs = 1,
+                       .socket_id = SOCKET_ID_ANY,
+                       .session_mp = {
+                               .nb_objs = 2048,
+                               .cache_size = 64
+                       }
+               };
+
+               rte_cryptodev_info_get(cdev_id, &dev_info);
+
+               /* Set cipher parameters */
+               if (options->xform_chain == L2FWD_CRYPTO_CIPHER_HASH ||
+                               options->xform_chain == L2FWD_CRYPTO_HASH_CIPHER ||
+                               options->xform_chain == L2FWD_CRYPTO_CIPHER_ONLY) {
+                       /* Check if device supports cipher algo */
+                       i = 0;
+                       opt_cipher_algo = options->cipher_xform.cipher.algo;
+                       cap = &dev_info.capabilities[i];
+                       while (cap->op != RTE_CRYPTO_OP_TYPE_UNDEFINED) {
+                               cap_cipher_algo = cap->sym.cipher.algo;
+                               if (cap->sym.xform_type ==
+                                               RTE_CRYPTO_SYM_XFORM_CIPHER) {
+                                       if (cap_cipher_algo == opt_cipher_algo) {
+                                               if (check_type(options, &dev_info) == 0)
+                                                       break;
+                                       }
+                               }
+                               cap = &dev_info.capabilities[++i];
+                       }
+
+                       if (cap->op == RTE_CRYPTO_OP_TYPE_UNDEFINED) {
+                               printf("Algorithm %s not supported by cryptodev %u"
+                                       " or device not of preferred type (%s)\n",
+                                       supported_cipher_algo[opt_cipher_algo],
+                                       cdev_id,
+                                       options->string_type);
+                               continue;
+                       }
+
+                       options->block_size = cap->sym.cipher.block_size;
+                       /*
+                        * Check if length of provided IV is supported
+                        * by the algorithm chosen.
+                        */
+                       if (options->iv_param) {
+                               if (check_supported_size(options->iv.length,
+                                               cap->sym.cipher.iv_size.min,
+                                               cap->sym.cipher.iv_size.max,
+                                               cap->sym.cipher.iv_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported IV length\n");
+                                       return -1;
+                               }
+                       /*
+                        * Check if length of IV to be randomly generated
+                        * is supported by the algorithm chosen.
+                        */
+                       } else if (options->iv_random_size != -1) {
+                               if (check_supported_size(options->iv_random_size,
+                                               cap->sym.cipher.iv_size.min,
+                                               cap->sym.cipher.iv_size.max,
+                                               cap->sym.cipher.iv_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported IV length\n");
+                                       return -1;
+                               }
+                               options->iv.length = options->iv_random_size;
+                       /* No size provided, use minimum size. */
+                       } else
+                               options->iv.length = cap->sym.cipher.iv_size.min;
+
+                       /*
+                        * Check if length of provided cipher key is supported
+                        * by the algorithm chosen.
+                        */
+                       if (options->ckey_param) {
+                               if (check_supported_size(
+                                               options->cipher_xform.cipher.key.length,
+                                               cap->sym.cipher.key_size.min,
+                                               cap->sym.cipher.key_size.max,
+                                               cap->sym.cipher.key_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported cipher key length\n");
+                                       return -1;
+                               }
+                       /*
+                        * Check if length of the cipher key to be randomly generated
+                        * is supported by the algorithm chosen.
+                        */
+                       } else if (options->ckey_random_size != -1) {
+                               if (check_supported_size(options->ckey_random_size,
+                                               cap->sym.cipher.key_size.min,
+                                               cap->sym.cipher.key_size.max,
+                                               cap->sym.cipher.key_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported cipher key length\n");
+                                       return -1;
+                               }
+                               options->cipher_xform.cipher.key.length =
+                                                       options->ckey_random_size;
+                       /* No size provided, use minimum size. */
+                       } else
+                               options->cipher_xform.cipher.key.length =
+                                               cap->sym.cipher.key_size.min;
+
+                       if (!options->ckey_param)
+                               generate_random_key(
+                                       options->cipher_xform.cipher.key.data,
+                                       options->cipher_xform.cipher.key.length);
+
+               }
+
+               /* Set auth parameters */
+               if (options->xform_chain == L2FWD_CRYPTO_CIPHER_HASH ||
+                               options->xform_chain == L2FWD_CRYPTO_HASH_CIPHER ||
+                               options->xform_chain == L2FWD_CRYPTO_HASH_ONLY) {
+                       /* Check if device supports auth algo */
+                       i = 0;
+                       opt_auth_algo = options->auth_xform.auth.algo;
+                       cap = &dev_info.capabilities[i];
+                       while (cap->op != RTE_CRYPTO_OP_TYPE_UNDEFINED) {
+                               cap_auth_algo = cap->sym.auth.algo;
+                               if ((cap->sym.xform_type == RTE_CRYPTO_SYM_XFORM_AUTH) &&
+                                               (cap_auth_algo == opt_auth_algo) &&
+                                               (check_type(options, &dev_info) == 0)) {
+                                       break;
+                               }
+                               cap = &dev_info.capabilities[++i];
+                       }
+
+                       if (cap->op == RTE_CRYPTO_OP_TYPE_UNDEFINED) {
+                               printf("Algorithm %s not supported by cryptodev %u"
+                                       " or device not of preferred type (%s)\n",
+                                       supported_auth_algo[opt_auth_algo],
+                                       cdev_id,
+                                       options->string_type);
+                               continue;
+                       }
+
+                       options->block_size = cap->sym.auth.block_size;
+                       /*
+                        * Check if length of provided AAD is supported
+                        * by the algorithm chosen.
+                        */
+                       if (options->aad_param) {
+                               if (check_supported_size(options->aad.length,
+                                               cap->sym.auth.aad_size.min,
+                                               cap->sym.auth.aad_size.max,
+                                               cap->sym.auth.aad_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported AAD length\n");
+                                       return -1;
+                               }
+                       /*
+                        * Check if length of AAD to be randomly generated
+                        * is supported by the algorithm chosen.
+                        */
+                       } else if (options->aad_random_size != -1) {
+                               if (check_supported_size(options->aad_random_size,
+                                               cap->sym.auth.aad_size.min,
+                                               cap->sym.auth.aad_size.max,
+                                               cap->sym.auth.aad_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported AAD length\n");
+                                       return -1;
+                               }
+                               options->aad.length = options->aad_random_size;
+                       /* No size provided, use minimum size. */
+                       } else
+                               options->aad.length = cap->sym.auth.aad_size.min;
+
+                       options->auth_xform.auth.add_auth_data_length =
+                                               options->aad.length;
+
+                       /*
+                        * Check if length of provided auth key is supported
+                        * by the algorithm chosen.
+                        */
+                       if (options->akey_param) {
+                               if (check_supported_size(
+                                               options->auth_xform.auth.key.length,
+                                               cap->sym.auth.key_size.min,
+                                               cap->sym.auth.key_size.max,
+                                               cap->sym.auth.key_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported auth key length\n");
+                                       return -1;
+                               }
+                       /*
+                        * Check if length of the auth key to be randomly generated
+                        * is supported by the algorithm chosen.
+                        */
+                       } else if (options->akey_random_size != -1) {
+                               if (check_supported_size(options->akey_random_size,
+                                               cap->sym.auth.key_size.min,
+                                               cap->sym.auth.key_size.max,
+                                               cap->sym.auth.key_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported auth key length\n");
+                                       return -1;
+                               }
+                               options->auth_xform.auth.key.length =
+                                                       options->akey_random_size;
+                       /* No size provided, use minimum size. */
+                       } else
+                               options->auth_xform.auth.key.length =
+                                               cap->sym.auth.key_size.min;
+
+                       if (!options->akey_param)
+                               generate_random_key(
+                                       options->auth_xform.auth.key.data,
+                                       options->auth_xform.auth.key.length);
+
+                       /* Check if digest size is supported by the algorithm. */
+                       if (options->digest_size != -1) {
+                               if (check_supported_size(options->digest_size,
+                                               cap->sym.auth.digest_size.min,
+                                               cap->sym.auth.digest_size.max,
+                                               cap->sym.auth.digest_size.increment)
+                                                       != 0) {
+                                       printf("Unsupported digest length\n");
+                                       return -1;
+                               }
+                               options->auth_xform.auth.digest_length =
+                                                       options->digest_size;
+                       /* No size provided, use minimum size. */
+                       } else
+                               options->auth_xform.auth.digest_length =
+                                               cap->sym.auth.digest_size.min;
+               }
+
+               retval = rte_cryptodev_configure(cdev_id, &conf);
+               if (retval < 0) {
+                       printf("Failed to configure cryptodev %u", cdev_id);
+                       return -1;
+               }
+
+               qp_conf.nb_descriptors = 2048;
+
+               retval = rte_cryptodev_queue_pair_setup(cdev_id, 0, &qp_conf,
+                               SOCKET_ID_ANY);
+               if (retval < 0) {
+                       printf("Failed to setup queue pair %u on cryptodev %u",
+                                       0, cdev_id);
+                       return -1;
+               }
+
+               l2fwd_enabled_crypto_mask |= (1 << cdev_id);
+
+               enabled_cdevs[cdev_id] = 1;
+               enabled_cdev_count++;
+       }
+
+       return enabled_cdev_count;
+}
+
+static int
+initialize_ports(struct l2fwd_crypto_options *options)
+{
+       uint8_t last_portid, portid;
+       unsigned enabled_portcount = 0;
+       unsigned nb_ports = rte_eth_dev_count();
+
+       if (nb_ports == 0) {
+               printf("No Ethernet ports - bye\n");
+               return -1;
+       }
+
+       if (nb_ports > RTE_MAX_ETHPORTS)
+               nb_ports = RTE_MAX_ETHPORTS;
+
+       /* Reset l2fwd_dst_ports */
+       for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++)
+               l2fwd_dst_ports[portid] = 0;
+
+       for (last_portid = 0, portid = 0; portid < nb_ports; portid++) {
+               int retval;
+
+               /* Skip ports that are not enabled */
+               if ((options->portmask & (1 << portid)) == 0)
+                       continue;
+
+               /* init port */
+               printf("Initializing port %u... ", (unsigned) portid);
+               fflush(stdout);
+               retval = rte_eth_dev_configure(portid, 1, 1, &port_conf);
+               if (retval < 0) {
+                       printf("Cannot configure device: err=%d, port=%u\n",
+                                 retval, (unsigned) portid);
+                       return -1;
+               }
+
+               /* init one RX queue */
+               fflush(stdout);
+               retval = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
+                                            rte_eth_dev_socket_id(portid),
+                                            NULL, l2fwd_pktmbuf_pool);
+               if (retval < 0) {
+                       printf("rte_eth_rx_queue_setup:err=%d, port=%u\n",
+                                       retval, (unsigned) portid);
+                       return -1;
+               }
+
+               /* init one TX queue on each port */
+               fflush(stdout);
+               retval = rte_eth_tx_queue_setup(portid, 0, nb_txd,
+                               rte_eth_dev_socket_id(portid),
+                               NULL);
+               if (retval < 0) {
+                       printf("rte_eth_tx_queue_setup:err=%d, port=%u\n",
+                               retval, (unsigned) portid);
+
+                       return -1;
+               }
+
+               /* Start device */
+               retval = rte_eth_dev_start(portid);
+               if (retval < 0) {
+                       printf("rte_eth_dev_start:err=%d, port=%u\n",
+                                       retval, (unsigned) portid);
+                       return -1;
+               }
+
+               rte_eth_promiscuous_enable(portid);
+
+               rte_eth_macaddr_get(portid, &l2fwd_ports_eth_addr[portid]);
+
+               printf("Port %u, MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
+                               (unsigned) portid,
+                               l2fwd_ports_eth_addr[portid].addr_bytes[0],
+                               l2fwd_ports_eth_addr[portid].addr_bytes[1],
+                               l2fwd_ports_eth_addr[portid].addr_bytes[2],
+                               l2fwd_ports_eth_addr[portid].addr_bytes[3],
+                               l2fwd_ports_eth_addr[portid].addr_bytes[4],
+                               l2fwd_ports_eth_addr[portid].addr_bytes[5]);
+
+               /* initialize port stats */
+               memset(&port_statistics, 0, sizeof(port_statistics));
+
+               /* Setup port forwarding table */
+               if (enabled_portcount % 2) {
+                       l2fwd_dst_ports[portid] = last_portid;
+                       l2fwd_dst_ports[last_portid] = portid;
+               } else {
+                       last_portid = portid;
+               }
+
+               l2fwd_enabled_port_mask |= (1 << portid);
+               enabled_portcount++;
+       }
+
+       if (enabled_portcount == 1) {
+               l2fwd_dst_ports[last_portid] = last_portid;
+       } else if (enabled_portcount % 2) {
+               printf("odd number of ports in portmask- bye\n");
+               return -1;
+       }
+
+       check_all_ports_link_status(nb_ports, l2fwd_enabled_port_mask);
+
+       return enabled_portcount;
+}
+
+static void
+reserve_key_memory(struct l2fwd_crypto_options *options)
+{
+       options->cipher_xform.cipher.key.data = rte_malloc("crypto key",
+                                               MAX_KEY_SIZE, 0);
+       if (options->cipher_xform.cipher.key.data == NULL)
+               rte_exit(EXIT_FAILURE, "Failed to allocate memory for cipher key");
+
+
+       options->auth_xform.auth.key.data = rte_malloc("auth key",
+                                               MAX_KEY_SIZE, 0);
+       if (options->auth_xform.auth.key.data == NULL)
+               rte_exit(EXIT_FAILURE, "Failed to allocate memory for auth key");
+
+       options->iv.data = rte_malloc("iv", MAX_KEY_SIZE, 0);
+       if (options->iv.data == NULL)
+               rte_exit(EXIT_FAILURE, "Failed to allocate memory for IV");
+       options->iv.phys_addr = rte_malloc_virt2phy(options->iv.data);
+
+       options->aad.data = rte_malloc("aad", MAX_KEY_SIZE, 0);
+       if (options->aad.data == NULL)
+               rte_exit(EXIT_FAILURE, "Failed to allocate memory for AAD");
+       options->aad.phys_addr = rte_malloc_virt2phy(options->aad.data);
+}
+
+int
+main(int argc, char **argv)
+{
+       struct lcore_queue_conf *qconf;
+       struct l2fwd_crypto_options options;
+
+       uint8_t nb_ports, nb_cryptodevs, portid, cdev_id;
+       unsigned lcore_id, rx_lcore_id;
+       int ret, enabled_cdevcount, enabled_portcount;
+       uint8_t enabled_cdevs[RTE_CRYPTO_MAX_DEVS] = {0};
+
+       /* init EAL */
+       ret = rte_eal_init(argc, argv);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
+       argc -= ret;
+       argv += ret;
+
+       /* reserve memory for Cipher/Auth key and IV */
+       reserve_key_memory(&options);
+
+       /* fill out the supported algorithm tables */
+       fill_supported_algorithm_tables();
+
+       /* parse application arguments (after the EAL ones) */
+       ret = l2fwd_crypto_parse_args(&options, argc, argv);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Invalid L2FWD-CRYPTO arguments\n");
+
+       /* create the mbuf pool */
+       l2fwd_pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool", NB_MBUF, 512,
+                       sizeof(struct rte_crypto_op),
+                       RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+       if (l2fwd_pktmbuf_pool == NULL)
+               rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+       /* create crypto op pool */
+       l2fwd_crypto_op_pool = rte_crypto_op_pool_create("crypto_op_pool",
+                       RTE_CRYPTO_OP_TYPE_SYMMETRIC, NB_MBUF, 128, 0,
+                       rte_socket_id());
+       if (l2fwd_crypto_op_pool == NULL)
+               rte_exit(EXIT_FAILURE, "Cannot create crypto op pool\n");
+
+       /* Enable Ethernet ports */
+       enabled_portcount = initialize_ports(&options);
+       if (enabled_portcount < 1)
+               rte_exit(EXIT_FAILURE, "Failed to initial Ethernet ports\n");
+
+       nb_ports = rte_eth_dev_count();
+       /* Initialize the port/queue configuration of each logical core */
+       for (rx_lcore_id = 0, qconf = NULL, portid = 0;
+                       portid < nb_ports; portid++) {
+
+               /* skip ports that are not enabled */
+               if ((options.portmask & (1 << portid)) == 0)
+                       continue;
+
+               if (options.single_lcore && qconf == NULL) {
+                       while (rte_lcore_is_enabled(rx_lcore_id) == 0) {
+                               rx_lcore_id++;
+                               if (rx_lcore_id >= RTE_MAX_LCORE)
+                                       rte_exit(EXIT_FAILURE,
+                                                       "Not enough cores\n");
+                       }
+               } else if (!options.single_lcore) {
+                       /* get the lcore_id for this port */
+                       while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
+                              lcore_queue_conf[rx_lcore_id].nb_rx_ports ==
+                              options.nb_ports_per_lcore) {
+                               rx_lcore_id++;
+                               if (rx_lcore_id >= RTE_MAX_LCORE)
+                                       rte_exit(EXIT_FAILURE,
+                                                       "Not enough cores\n");
+                       }
+               }
+
+               /* Assigned a new logical core in the loop above. */
+               if (qconf != &lcore_queue_conf[rx_lcore_id])
+                       qconf = &lcore_queue_conf[rx_lcore_id];
+
+               qconf->rx_port_list[qconf->nb_rx_ports] = portid;
+               qconf->nb_rx_ports++;
+
+               printf("Lcore %u: RX port %u\n", rx_lcore_id, (unsigned)portid);
+       }
+
+       /* Enable Crypto devices */
+       enabled_cdevcount = initialize_cryptodevs(&options, enabled_portcount,
+                       enabled_cdevs);
+       if (enabled_cdevcount < 0)
+               rte_exit(EXIT_FAILURE, "Failed to initialize crypto devices\n");
+
+       if (enabled_cdevcount < enabled_portcount)
+               rte_exit(EXIT_FAILURE, "Number of capable crypto devices (%d) "
+                               "has to be more or equal to number of ports (%d)\n",
+                               enabled_cdevcount, enabled_portcount);
+
+       nb_cryptodevs = rte_cryptodev_count();
+
+       /* Initialize the port/cryptodev configuration of each logical core */
+       for (rx_lcore_id = 0, qconf = NULL, cdev_id = 0;
+                       cdev_id < nb_cryptodevs && enabled_cdevcount;
+                       cdev_id++) {
+               /* Crypto op not supported by crypto device */
+               if (!enabled_cdevs[cdev_id])
+                       continue;
+
+               if (options.single_lcore && qconf == NULL) {
+                       while (rte_lcore_is_enabled(rx_lcore_id) == 0) {
+                               rx_lcore_id++;
+                               if (rx_lcore_id >= RTE_MAX_LCORE)
+                                       rte_exit(EXIT_FAILURE,
+                                                       "Not enough cores\n");
+                       }
+               } else if (!options.single_lcore) {
+                       /* get the lcore_id for this port */
+                       while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
+                              lcore_queue_conf[rx_lcore_id].nb_crypto_devs ==
+                              options.nb_ports_per_lcore) {
+                               rx_lcore_id++;
+                               if (rx_lcore_id >= RTE_MAX_LCORE)
+                                       rte_exit(EXIT_FAILURE,
+                                                       "Not enough cores\n");
+                       }
+               }
+
+               /* Assigned a new logical core in the loop above. */
+               if (qconf != &lcore_queue_conf[rx_lcore_id])
+                       qconf = &lcore_queue_conf[rx_lcore_id];
+
+               qconf->cryptodev_list[qconf->nb_crypto_devs] = cdev_id;
+               qconf->nb_crypto_devs++;
+
+               enabled_cdevcount--;
+
+               printf("Lcore %u: cryptodev %u\n", rx_lcore_id,
+                               (unsigned)cdev_id);
+       }
+
+       /* launch per-lcore init on every lcore */
+       rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, (void *)&options,
+                       CALL_MASTER);
+       RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+               if (rte_eal_wait_lcore(lcore_id) < 0)
+                       return -1;
+       }
+
+       return 0;
+}