New upstream version 18.11-rc1
[deb_dpdk.git] / examples / l3fwd-power / main.c
index d15cd52..0b3f8fe 100644 (file)
@@ -43,6 +43,7 @@
 #include <rte_timer.h>
 #include <rte_power.h>
 #include <rte_spinlock.h>
+#include <rte_power_empty_poll.h>
 
 #include "perf_core.h"
 #include "main.h"
@@ -55,6 +56,8 @@
 
 /* 100 ms interval */
 #define TIMER_NUMBER_PER_SECOND           10
+/* (10ms) */
+#define INTERVALS_PER_SECOND             100
 /* 100000 us */
 #define SCALING_PERIOD                    (1000000/TIMER_NUMBER_PER_SECOND)
 #define SCALING_DOWN_TIME_RATIO_THRESHOLD 0.25
  */
 #define RTE_TEST_RX_DESC_DEFAULT 1024
 #define RTE_TEST_TX_DESC_DEFAULT 1024
+
+/*
+ * These two thresholds were decided on by running the training algorithm on
+ * a 2.5GHz Xeon. These defaults can be overridden by supplying non-zero values
+ * for the med_threshold and high_threshold parameters on the command line.
+ */
+#define EMPTY_POLL_MED_THRESHOLD 350000UL
+#define EMPTY_POLL_HGH_THRESHOLD 580000UL
+
+
+
 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
 
@@ -132,6 +146,14 @@ static uint32_t enabled_port_mask = 0;
 static int promiscuous_on = 0;
 /* NUMA is enabled by default. */
 static int numa_on = 1;
+/* emptypoll is disabled by default. */
+static bool empty_poll_on;
+static bool empty_poll_train;
+volatile bool empty_poll_stop;
+static struct  ep_params *ep_params;
+static struct  ep_policy policy;
+static long  ep_med_edpi, ep_hgh_edpi;
+
 static int parse_ptype; /**< Parse packet type using rx callback, and */
                        /**< disabled by default */
 
@@ -180,8 +202,7 @@ static struct rte_eth_conf port_conf = {
                .mq_mode        = ETH_MQ_RX_RSS,
                .max_rx_pkt_len = ETHER_MAX_LEN,
                .split_hdr_size = 0,
-               .offloads = (DEV_RX_OFFLOAD_CRC_STRIP |
-                            DEV_RX_OFFLOAD_CHECKSUM),
+               .offloads = DEV_RX_OFFLOAD_CHECKSUM,
        },
        .rx_adv_conf = {
                .rss_conf = {
@@ -331,6 +352,19 @@ static inline uint32_t power_idle_heuristic(uint32_t zero_rx_packet_count);
 static inline enum freq_scale_hint_t power_freq_scaleup_heuristic( \
                unsigned int lcore_id, uint16_t port_id, uint16_t queue_id);
 
+
+/*
+ * These defaults are using the max frequency index (1), a medium index (9)
+ * and a typical low frequency index (14). These can be adjusted to use
+ * different indexes using the relevant command line parameters.
+ */
+static uint8_t  freq_tlb[] = {14, 9, 1};
+
+static int is_done(void)
+{
+       return empty_poll_stop;
+}
+
 /* exit signal handler */
 static void
 signal_exit_now(int sigtype)
@@ -340,6 +374,10 @@ signal_exit_now(int sigtype)
        int ret;
 
        if (sigtype == SIGINT) {
+               if (empty_poll_on)
+                       empty_poll_stop = true;
+
+
                for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
                        if (rte_lcore_is_enabled(lcore_id) == 0)
                                continue;
@@ -352,16 +390,19 @@ signal_exit_now(int sigtype)
                                                        "core%u\n", lcore_id);
                }
 
-               RTE_ETH_FOREACH_DEV(portid) {
-                       if ((enabled_port_mask & (1 << portid)) == 0)
-                               continue;
+               if (!empty_poll_on) {
+                       RTE_ETH_FOREACH_DEV(portid) {
+                               if ((enabled_port_mask & (1 << portid)) == 0)
+                                       continue;
 
-                       rte_eth_dev_stop(portid);
-                       rte_eth_dev_close(portid);
+                               rte_eth_dev_stop(portid);
+                               rte_eth_dev_close(portid);
+                       }
                }
        }
 
-       rte_exit(EXIT_SUCCESS, "User forced exit\n");
+       if (!empty_poll_on)
+               rte_exit(EXIT_SUCCESS, "User forced exit\n");
 }
 
 /*  Freqency scale down timer callback */
@@ -826,7 +867,110 @@ static int event_register(struct lcore_conf *qconf)
 
        return 0;
 }
+/* main processing loop */
+static int
+main_empty_poll_loop(__attribute__((unused)) void *dummy)
+{
+       struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+       unsigned int lcore_id;
+       uint64_t prev_tsc, diff_tsc, cur_tsc;
+       int i, j, nb_rx;
+       uint8_t queueid;
+       uint16_t portid;
+       struct lcore_conf *qconf;
+       struct lcore_rx_queue *rx_queue;
+
+       const uint64_t drain_tsc =
+               (rte_get_tsc_hz() + US_PER_S - 1) /
+               US_PER_S * BURST_TX_DRAIN_US;
+
+       prev_tsc = 0;
+
+       lcore_id = rte_lcore_id();
+       qconf = &lcore_conf[lcore_id];
+
+       if (qconf->n_rx_queue == 0) {
+               RTE_LOG(INFO, L3FWD_POWER, "lcore %u has nothing to do\n",
+                       lcore_id);
+               return 0;
+       }
+
+       for (i = 0; i < qconf->n_rx_queue; i++) {
+               portid = qconf->rx_queue_list[i].port_id;
+               queueid = qconf->rx_queue_list[i].queue_id;
+               RTE_LOG(INFO, L3FWD_POWER, " -- lcoreid=%u portid=%u "
+                               "rxqueueid=%hhu\n", lcore_id, portid, queueid);
+       }
+
+       while (!is_done()) {
+               stats[lcore_id].nb_iteration_looped++;
+
+               cur_tsc = rte_rdtsc();
+               /*
+                * TX burst queue drain
+                */
+               diff_tsc = cur_tsc - prev_tsc;
+               if (unlikely(diff_tsc > drain_tsc)) {
+                       for (i = 0; i < qconf->n_tx_port; ++i) {
+                               portid = qconf->tx_port_id[i];
+                               rte_eth_tx_buffer_flush(portid,
+                                               qconf->tx_queue_id[portid],
+                                               qconf->tx_buffer[portid]);
+                       }
+                       prev_tsc = cur_tsc;
+               }
+
+               /*
+                * Read packet from RX queues
+                */
+               for (i = 0; i < qconf->n_rx_queue; ++i) {
+                       rx_queue = &(qconf->rx_queue_list[i]);
+                       rx_queue->idle_hint = 0;
+                       portid = rx_queue->port_id;
+                       queueid = rx_queue->queue_id;
+
+                       nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
+                                       MAX_PKT_BURST);
+
+                       stats[lcore_id].nb_rx_processed += nb_rx;
+
+                       if (nb_rx == 0) {
+
+                               rte_power_empty_poll_stat_update(lcore_id);
+
+                               continue;
+                       } else {
+                               rte_power_poll_stat_update(lcore_id, nb_rx);
+                       }
 
+
+                       /* Prefetch first packets */
+                       for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
+                               rte_prefetch0(rte_pktmbuf_mtod(
+                                                       pkts_burst[j], void *));
+                       }
+
+                       /* Prefetch and forward already prefetched packets */
+                       for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
+                               rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
+                                                       j + PREFETCH_OFFSET],
+                                                       void *));
+                               l3fwd_simple_forward(pkts_burst[j], portid,
+                                               qconf);
+                       }
+
+                       /* Forward remaining prefetched packets */
+                       for (; j < nb_rx; j++) {
+                               l3fwd_simple_forward(pkts_burst[j], portid,
+                                               qconf);
+                       }
+
+               }
+
+       }
+
+       return 0;
+}
 /* main processing loop */
 static int
 main_loop(__attribute__((unused)) void *dummy)
@@ -1128,7 +1272,9 @@ print_usage(const char *prgname)
                "  --no-numa: optional, disable numa awareness\n"
                "  --enable-jumbo: enable jumbo frame"
                " which max packet len is PKTLEN in decimal (64-9600)\n"
-               "  --parse-ptype: parse packet type by software\n",
+               "  --parse-ptype: parse packet type by software\n"
+               "  --empty-poll: enable empty poll detection"
+               " follow (training_flag, high_threshold, med_threshold)\n",
                prgname);
 }
 
@@ -1221,7 +1367,55 @@ parse_config(const char *q_arg)
 
        return 0;
 }
+static int
+parse_ep_config(const char *q_arg)
+{
+       char s[256];
+       const char *p = q_arg;
+       char *end;
+       int  num_arg;
+
+       char *str_fld[3];
+
+       int training_flag;
+       int med_edpi;
+       int hgh_edpi;
+
+       ep_med_edpi = EMPTY_POLL_MED_THRESHOLD;
+       ep_hgh_edpi = EMPTY_POLL_MED_THRESHOLD;
+
+       snprintf(s, sizeof(s), "%s", p);
+
+       num_arg = rte_strsplit(s, sizeof(s), str_fld, 3, ',');
+
+       empty_poll_train = false;
+
+       if (num_arg == 0)
+               return 0;
+
+       if (num_arg == 3) {
+
+               training_flag = strtoul(str_fld[0], &end, 0);
+               med_edpi = strtoul(str_fld[1], &end, 0);
+               hgh_edpi = strtoul(str_fld[2], &end, 0);
+
+               if (training_flag == 1)
+                       empty_poll_train = true;
+
+               if (med_edpi > 0)
+                       ep_med_edpi = med_edpi;
+
+               if (med_edpi > 0)
+                       ep_hgh_edpi = hgh_edpi;
+
+       } else {
+
+               return -1;
+       }
+
+       return 0;
 
+}
 #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
 
 /* Parse the argument given in the command line of the application */
@@ -1231,6 +1425,7 @@ parse_args(int argc, char **argv)
        int opt, ret;
        char **argvopt;
        int option_index;
+       uint32_t limit;
        char *prgname = argv[0];
        static struct option lgopts[] = {
                {"config", 1, 0, 0},
@@ -1238,13 +1433,14 @@ parse_args(int argc, char **argv)
                {"high-perf-cores", 1, 0, 0},
                {"no-numa", 0, 0, 0},
                {"enable-jumbo", 0, 0, 0},
+               {"empty-poll", 1, 0, 0},
                {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
                {NULL, 0, 0, 0}
        };
 
        argvopt = argv;
 
-       while ((opt = getopt_long(argc, argvopt, "p:P",
+       while ((opt = getopt_long(argc, argvopt, "p:l:m:h:P",
                                lgopts, &option_index)) != EOF) {
 
                switch (opt) {
@@ -1261,7 +1457,18 @@ parse_args(int argc, char **argv)
                        printf("Promiscuous mode selected\n");
                        promiscuous_on = 1;
                        break;
-
+               case 'l':
+                       limit = parse_max_pkt_len(optarg);
+                       freq_tlb[LOW] = limit;
+                       break;
+               case 'm':
+                       limit = parse_max_pkt_len(optarg);
+                       freq_tlb[MED] = limit;
+                       break;
+               case 'h':
+                       limit = parse_max_pkt_len(optarg);
+                       freq_tlb[HGH] = limit;
+                       break;
                /* long options */
                case 0:
                        if (!strncmp(lgopts[option_index].name, "config", 6)) {
@@ -1299,6 +1506,20 @@ parse_args(int argc, char **argv)
                                numa_on = 0;
                        }
 
+                       if (!strncmp(lgopts[option_index].name,
+                                               "empty-poll", 10)) {
+                               printf("empty-poll is enabled\n");
+                               empty_poll_on = true;
+                               ret = parse_ep_config(optarg);
+
+                               if (ret) {
+                                       printf("invalid empty poll config\n");
+                                       print_usage(prgname);
+                                       return -1;
+                               }
+
+                       }
+
                        if (!strncmp(lgopts[option_index].name,
                                        "enable-jumbo", 12)) {
                                struct option lenopts =
@@ -1647,6 +1868,59 @@ init_power_library(void)
        }
        return ret;
 }
+static void
+empty_poll_setup_timer(void)
+{
+       int lcore_id = rte_lcore_id();
+       uint64_t hz = rte_get_timer_hz();
+
+       struct  ep_params *ep_ptr = ep_params;
+
+       ep_ptr->interval_ticks = hz / INTERVALS_PER_SECOND;
+
+       rte_timer_reset_sync(&ep_ptr->timer0,
+                       ep_ptr->interval_ticks,
+                       PERIODICAL,
+                       lcore_id,
+                       rte_empty_poll_detection,
+                       (void *)ep_ptr);
+
+}
+static int
+launch_timer(unsigned int lcore_id)
+{
+       int64_t prev_tsc = 0, cur_tsc, diff_tsc, cycles_10ms;
+
+       RTE_SET_USED(lcore_id);
+
+
+       if (rte_get_master_lcore() != lcore_id) {
+               rte_panic("timer on lcore:%d which is not master core:%d\n",
+                               lcore_id,
+                               rte_get_master_lcore());
+       }
+
+       RTE_LOG(INFO, POWER, "Bring up the Timer\n");
+
+       empty_poll_setup_timer();
+
+       cycles_10ms = rte_get_timer_hz() / 100;
+
+       while (!is_done()) {
+               cur_tsc = rte_rdtsc();
+               diff_tsc = cur_tsc - prev_tsc;
+               if (diff_tsc > cycles_10ms) {
+                       rte_timer_manage();
+                       prev_tsc = cur_tsc;
+                       cycles_10ms = rte_get_timer_hz() / 100;
+               }
+       }
+
+       RTE_LOG(INFO, POWER, "Timer_subsystem is done\n");
+
+       return 0;
+}
+
 
 int
 main(int argc, char **argv)
@@ -1829,13 +2103,15 @@ main(int argc, char **argv)
                if (rte_lcore_is_enabled(lcore_id) == 0)
                        continue;
 
-               /* init timer structures for each enabled lcore */
-               rte_timer_init(&power_timers[lcore_id]);
-               hz = rte_get_timer_hz();
-               rte_timer_reset(&power_timers[lcore_id],
-                       hz/TIMER_NUMBER_PER_SECOND, SINGLE, lcore_id,
-                                               power_timer_cb, NULL);
-
+               if (empty_poll_on == false) {
+                       /* init timer structures for each enabled lcore */
+                       rte_timer_init(&power_timers[lcore_id]);
+                       hz = rte_get_timer_hz();
+                       rte_timer_reset(&power_timers[lcore_id],
+                                       hz/TIMER_NUMBER_PER_SECOND,
+                                       SINGLE, lcore_id,
+                                       power_timer_cb, NULL);
+               }
                qconf = &lcore_conf[lcore_id];
                printf("\nInitializing rx queues on lcore %u ... ", lcore_id );
                fflush(stdout);
@@ -1906,12 +2182,43 @@ main(int argc, char **argv)
 
        check_all_ports_link_status(enabled_port_mask);
 
+       if (empty_poll_on == true) {
+
+               if (empty_poll_train) {
+                       policy.state = TRAINING;
+               } else {
+                       policy.state = MED_NORMAL;
+                       policy.med_base_edpi = ep_med_edpi;
+                       policy.hgh_base_edpi = ep_hgh_edpi;
+               }
+
+               ret = rte_power_empty_poll_stat_init(&ep_params,
+                               freq_tlb,
+                               &policy);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE, "empty poll init failed");
+       }
+
+
        /* launch per-lcore init on every lcore */
-       rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
+       if (empty_poll_on == false) {
+               rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
+       } else {
+               empty_poll_stop = false;
+               rte_eal_mp_remote_launch(main_empty_poll_loop, NULL,
+                               SKIP_MASTER);
+       }
+
+       if (empty_poll_on == true)
+               launch_timer(rte_lcore_id());
+
        RTE_LCORE_FOREACH_SLAVE(lcore_id) {
                if (rte_eal_wait_lcore(lcore_id) < 0)
                        return -1;
        }
 
+       if (empty_poll_on)
+               rte_power_empty_poll_stat_free();
+
        return 0;
 }