Imported Upstream version 16.04
[deb_dpdk.git] / examples / l3fwd-vf / main.c
diff --git a/examples/l3fwd-vf/main.c b/examples/l3fwd-vf/main.c
new file mode 100644 (file)
index 0000000..034c22a
--- /dev/null
@@ -0,0 +1,1097 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <string.h>
+#include <sys/queue.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <getopt.h>
+#include <signal.h>
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_spinlock.h>
+#include <rte_cycles.h>
+#include <rte_prefetch.h>
+#include <rte_lcore.h>
+#include <rte_per_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_random.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_ip.h>
+#include <rte_tcp.h>
+#include <rte_udp.h>
+#include <rte_string_fns.h>
+
+#define APP_LOOKUP_EXACT_MATCH          0
+#define APP_LOOKUP_LPM                  1
+#define DO_RFC_1812_CHECKS
+
+//#define APP_LOOKUP_METHOD             APP_LOOKUP_EXACT_MATCH
+#ifndef APP_LOOKUP_METHOD
+#define APP_LOOKUP_METHOD             APP_LOOKUP_LPM
+#endif
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
+#include <rte_hash.h>
+#elif (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
+#include <rte_lpm.h>
+#else
+#error "APP_LOOKUP_METHOD set to incorrect value"
+#endif
+
+#define RTE_LOGTYPE_L3FWD RTE_LOGTYPE_USER1
+
+#define MEMPOOL_CACHE_SIZE 256
+
+/*
+ * This expression is used to calculate the number of mbufs needed depending on user input, taking
+ *  into account memory for rx and tx hardware rings, cache per lcore and mtable per port per lcore.
+ *  RTE_MAX is used to ensure that NB_MBUF never goes below a minimum value of 8192
+ */
+
+#define NB_MBUF RTE_MAX        (                                                                                                                                       \
+                               (nb_ports*nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT +                                                        \
+                               nb_ports*nb_lcores*MAX_PKT_BURST +                                                                                      \
+                               nb_ports*n_tx_queue*RTE_TEST_TX_DESC_DEFAULT +                                                          \
+                               nb_lcores*MEMPOOL_CACHE_SIZE),                                                                                          \
+                               (unsigned)8192)
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
+#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
+#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
+#define TX_HTHRESH 0  /**< Default values of TX host threshold reg. */
+#define TX_WTHRESH 0  /**< Default values of TX write-back threshold reg. */
+
+#define MAX_PKT_BURST 32
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+#define NB_SOCKETS 8
+
+#define SOCKET0 0
+
+/* Configure how many packets ahead to prefetch, when reading packets */
+#define PREFETCH_OFFSET        3
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 128
+#define RTE_TEST_TX_DESC_DEFAULT 512
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+
+/* ethernet addresses of ports */
+static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+static int numa_on = 1; /**< NUMA is enabled by default. */
+
+struct mbuf_table {
+       uint16_t len;
+       struct rte_mbuf *m_table[MAX_PKT_BURST];
+};
+
+struct lcore_rx_queue {
+       uint8_t port_id;
+       uint8_t queue_id;
+} __rte_cache_aligned;
+
+#define MAX_RX_QUEUE_PER_LCORE 16
+#define MAX_TX_QUEUE_PER_PORT 1
+#define MAX_RX_QUEUE_PER_PORT 1
+
+#define MAX_LCORE_PARAMS 1024
+struct lcore_params {
+       uint8_t port_id;
+       uint8_t queue_id;
+       uint8_t lcore_id;
+} __rte_cache_aligned;
+
+static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS];
+static struct lcore_params lcore_params_array_default[] = {
+       {0, 0, 2},
+       {0, 1, 2},
+       {0, 2, 2},
+       {1, 0, 2},
+       {1, 1, 2},
+       {1, 2, 2},
+       {2, 0, 2},
+       {3, 0, 3},
+       {3, 1, 3},
+};
+
+static struct lcore_params * lcore_params = lcore_params_array_default;
+static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
+                               sizeof(lcore_params_array_default[0]);
+
+static struct rte_eth_conf port_conf = {
+       .rxmode = {
+               .mq_mode        = ETH_MQ_RX_RSS,
+               .max_rx_pkt_len = ETHER_MAX_LEN,
+               .split_hdr_size = 0,
+               .header_split   = 0, /**< Header Split disabled */
+               .hw_ip_checksum = 1, /**< IP checksum offload enabled */
+               .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+               .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
+               .hw_strip_crc   = 0, /**< CRC stripped by hardware */
+       },
+       .rx_adv_conf = {
+               .rss_conf = {
+                       .rss_key = NULL,
+                       .rss_hf = ETH_RSS_IP,
+               },
+       },
+       .txmode = {
+               .mq_mode = ETH_MQ_TX_NONE,
+       },
+};
+
+static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
+
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
+
+#ifdef RTE_MACHINE_CPUFLAG_SSE4_2
+#include <rte_hash_crc.h>
+#define DEFAULT_HASH_FUNC       rte_hash_crc
+#else
+#include <rte_jhash.h>
+#define DEFAULT_HASH_FUNC       rte_jhash
+#endif
+
+struct ipv4_5tuple {
+       uint32_t ip_dst;
+       uint32_t ip_src;
+       uint16_t port_dst;
+       uint16_t port_src;
+       uint8_t proto;
+} __attribute__((__packed__));
+
+struct l3fwd_route {
+       struct ipv4_5tuple key;
+       uint8_t if_out;
+};
+
+static struct l3fwd_route l3fwd_route_array[] = {
+       {{IPv4(100,10,0,1), IPv4(200,10,0,1), 101, 11, IPPROTO_TCP}, 0},
+       {{IPv4(100,20,0,2), IPv4(200,20,0,2), 102, 12, IPPROTO_TCP}, 1},
+       {{IPv4(100,30,0,3), IPv4(200,30,0,3), 103, 13, IPPROTO_TCP}, 2},
+       {{IPv4(100,40,0,4), IPv4(200,40,0,4), 104, 14, IPPROTO_TCP}, 3},
+};
+
+typedef struct rte_hash lookup_struct_t;
+static lookup_struct_t *l3fwd_lookup_struct[NB_SOCKETS];
+
+#define L3FWD_HASH_ENTRIES     1024
+struct rte_hash_parameters l3fwd_hash_params = {
+       .name = "l3fwd_hash_0",
+       .entries = L3FWD_HASH_ENTRIES,
+       .key_len = sizeof(struct ipv4_5tuple),
+       .hash_func = DEFAULT_HASH_FUNC,
+       .hash_func_init_val = 0,
+       .socket_id = SOCKET0,
+};
+
+#define L3FWD_NUM_ROUTES \
+       (sizeof(l3fwd_route_array) / sizeof(l3fwd_route_array[0]))
+
+static uint8_t l3fwd_out_if[L3FWD_HASH_ENTRIES] __rte_cache_aligned;
+#endif
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
+struct l3fwd_route {
+       uint32_t ip;
+       uint8_t  depth;
+       uint8_t  if_out;
+};
+
+static struct l3fwd_route l3fwd_route_array[] = {
+       {IPv4(1,1,1,0), 24, 0},
+       {IPv4(2,1,1,0), 24, 1},
+       {IPv4(3,1,1,0), 24, 2},
+       {IPv4(4,1,1,0), 24, 3},
+       {IPv4(5,1,1,0), 24, 4},
+       {IPv4(6,1,1,0), 24, 5},
+       {IPv4(7,1,1,0), 24, 6},
+       {IPv4(8,1,1,0), 24, 7},
+};
+
+#define L3FWD_NUM_ROUTES \
+       (sizeof(l3fwd_route_array) / sizeof(l3fwd_route_array[0]))
+
+#define L3FWD_LPM_MAX_RULES     1024
+
+typedef struct rte_lpm lookup_struct_t;
+static lookup_struct_t *l3fwd_lookup_struct[NB_SOCKETS];
+#endif
+
+struct lcore_conf {
+       uint16_t n_rx_queue;
+       struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
+       uint16_t tx_queue_id;
+       struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
+       lookup_struct_t * lookup_struct;
+} __rte_cache_aligned;
+
+static struct lcore_conf lcore_conf[RTE_MAX_LCORE];
+static rte_spinlock_t spinlock_conf[RTE_MAX_ETHPORTS] = {RTE_SPINLOCK_INITIALIZER};
+/* Send burst of packets on an output interface */
+static inline int
+send_burst(struct lcore_conf *qconf, uint16_t n, uint8_t port)
+{
+       struct rte_mbuf **m_table;
+       int ret;
+       uint16_t queueid;
+
+       queueid = qconf->tx_queue_id;
+       m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
+
+       rte_spinlock_lock(&spinlock_conf[port]);
+       ret = rte_eth_tx_burst(port, queueid, m_table, n);
+       rte_spinlock_unlock(&spinlock_conf[port]);
+
+       if (unlikely(ret < n)) {
+               do {
+                       rte_pktmbuf_free(m_table[ret]);
+               } while (++ret < n);
+       }
+
+       return 0;
+}
+
+/* Enqueue a single packet, and send burst if queue is filled */
+static inline int
+send_single_packet(struct rte_mbuf *m, uint8_t port)
+{
+       uint32_t lcore_id;
+       uint16_t len;
+       struct lcore_conf *qconf;
+
+       lcore_id = rte_lcore_id();
+
+       qconf = &lcore_conf[lcore_id];
+       len = qconf->tx_mbufs[port].len;
+       qconf->tx_mbufs[port].m_table[len] = m;
+       len++;
+
+       /* enough pkts to be sent */
+       if (unlikely(len == MAX_PKT_BURST)) {
+               send_burst(qconf, MAX_PKT_BURST, port);
+               len = 0;
+       }
+
+       qconf->tx_mbufs[port].len = len;
+       return 0;
+}
+
+#ifdef DO_RFC_1812_CHECKS
+static inline int
+is_valid_ipv4_pkt(struct ipv4_hdr *pkt, uint32_t link_len)
+{
+       /* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2 */
+       /*
+        * 1. The packet length reported by the Link Layer must be large
+        * enough to hold the minimum length legal IP datagram (20 bytes).
+        */
+       if (link_len < sizeof(struct ipv4_hdr))
+               return -1;
+
+       /* 2. The IP checksum must be correct. */
+       /* this is checked in H/W */
+
+       /*
+        * 3. The IP version number must be 4. If the version number is not 4
+        * then the packet may be another version of IP, such as IPng or
+        * ST-II.
+        */
+       if (((pkt->version_ihl) >> 4) != 4)
+               return -3;
+       /*
+        * 4. The IP header length field must be large enough to hold the
+        * minimum length legal IP datagram (20 bytes = 5 words).
+        */
+       if ((pkt->version_ihl & 0xf) < 5)
+               return -4;
+
+       /*
+        * 5. The IP total length field must be large enough to hold the IP
+        * datagram header, whose length is specified in the IP header length
+        * field.
+        */
+       if (rte_cpu_to_be_16(pkt->total_length) < sizeof(struct ipv4_hdr))
+               return -5;
+
+       return 0;
+}
+#endif
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
+static void
+print_key(struct ipv4_5tuple key)
+{
+       printf("IP dst = %08x, IP src = %08x, port dst = %d, port src = %d, proto = %d\n",
+              (unsigned)key.ip_dst, (unsigned)key.ip_src, key.port_dst, key.port_src, key.proto);
+}
+
+static inline uint8_t
+get_dst_port(struct ipv4_hdr *ipv4_hdr,  uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
+{
+       struct ipv4_5tuple key;
+       struct tcp_hdr *tcp;
+       struct udp_hdr *udp;
+       int ret = 0;
+
+       key.ip_dst = rte_be_to_cpu_32(ipv4_hdr->dst_addr);
+       key.ip_src = rte_be_to_cpu_32(ipv4_hdr->src_addr);
+       key.proto = ipv4_hdr->next_proto_id;
+
+       switch (ipv4_hdr->next_proto_id) {
+       case IPPROTO_TCP:
+               tcp = (struct tcp_hdr *)((unsigned char *) ipv4_hdr +
+                                       sizeof(struct ipv4_hdr));
+               key.port_dst = rte_be_to_cpu_16(tcp->dst_port);
+               key.port_src = rte_be_to_cpu_16(tcp->src_port);
+               break;
+
+       case IPPROTO_UDP:
+               udp = (struct udp_hdr *)((unsigned char *) ipv4_hdr +
+                                       sizeof(struct ipv4_hdr));
+               key.port_dst = rte_be_to_cpu_16(udp->dst_port);
+               key.port_src = rte_be_to_cpu_16(udp->src_port);
+               break;
+
+       default:
+               key.port_dst = 0;
+               key.port_src = 0;
+       }
+
+       /* Find destination port */
+       ret = rte_hash_lookup(l3fwd_lookup_struct, (const void *)&key);
+       return (uint8_t)((ret < 0)? portid : l3fwd_out_if[ret]);
+}
+#endif
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
+static inline uint8_t
+get_dst_port(struct ipv4_hdr *ipv4_hdr,  uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
+{
+       uint32_t next_hop;
+
+       return (uint8_t) ((rte_lpm_lookup(l3fwd_lookup_struct,
+                       rte_be_to_cpu_32(ipv4_hdr->dst_addr), &next_hop) == 0)?
+                       next_hop : portid);
+}
+#endif
+
+static inline void
+l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid, lookup_struct_t * l3fwd_lookup_struct)
+{
+       struct ether_hdr *eth_hdr;
+       struct ipv4_hdr *ipv4_hdr;
+       void *tmp;
+       uint8_t dst_port;
+
+       eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+       ipv4_hdr = rte_pktmbuf_mtod_offset(m, struct ipv4_hdr *,
+                                          sizeof(struct ether_hdr));
+
+#ifdef DO_RFC_1812_CHECKS
+       /* Check to make sure the packet is valid (RFC1812) */
+       if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
+               rte_pktmbuf_free(m);
+               return;
+       }
+#endif
+
+       dst_port = get_dst_port(ipv4_hdr, portid, l3fwd_lookup_struct);
+       if (dst_port >= RTE_MAX_ETHPORTS || (enabled_port_mask & 1 << dst_port) == 0)
+               dst_port = portid;
+
+       /* 02:00:00:00:00:xx */
+       tmp = &eth_hdr->d_addr.addr_bytes[0];
+       *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dst_port << 40);
+
+#ifdef DO_RFC_1812_CHECKS
+       /* Update time to live and header checksum */
+       --(ipv4_hdr->time_to_live);
+       ++(ipv4_hdr->hdr_checksum);
+#endif
+
+       /* src addr */
+       ether_addr_copy(&ports_eth_addr[dst_port], &eth_hdr->s_addr);
+
+       send_single_packet(m, dst_port);
+
+}
+
+/* main processing loop */
+static int
+main_loop(__attribute__((unused)) void *dummy)
+{
+       struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+       unsigned lcore_id;
+       uint64_t prev_tsc, diff_tsc, cur_tsc;
+       int i, j, nb_rx;
+       uint8_t portid, queueid;
+       struct lcore_conf *qconf;
+       const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+
+       prev_tsc = 0;
+
+       lcore_id = rte_lcore_id();
+       qconf = &lcore_conf[lcore_id];
+
+       if (qconf->n_rx_queue == 0) {
+               RTE_LOG(INFO, L3FWD, "lcore %u has nothing to do\n", lcore_id);
+               return 0;
+       }
+
+       RTE_LOG(INFO, L3FWD, "entering main loop on lcore %u\n", lcore_id);
+
+       for (i = 0; i < qconf->n_rx_queue; i++) {
+
+               portid = qconf->rx_queue_list[i].port_id;
+               queueid = qconf->rx_queue_list[i].queue_id;
+               RTE_LOG(INFO, L3FWD, " -- lcoreid=%u portid=%hhu rxqueueid=%hhu\n", lcore_id,
+                       portid, queueid);
+       }
+
+       while (1) {
+
+               cur_tsc = rte_rdtsc();
+
+               /*
+                * TX burst queue drain
+                */
+               diff_tsc = cur_tsc - prev_tsc;
+               if (unlikely(diff_tsc > drain_tsc)) {
+
+                       /*
+                        * This could be optimized (use queueid instead of
+                        * portid), but it is not called so often
+                        */
+                       for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+                               if (qconf->tx_mbufs[portid].len == 0)
+                                       continue;
+                               send_burst(&lcore_conf[lcore_id],
+                                       qconf->tx_mbufs[portid].len,
+                                       portid);
+                               qconf->tx_mbufs[portid].len = 0;
+                       }
+
+                       prev_tsc = cur_tsc;
+               }
+
+               /*
+                * Read packet from RX queues
+                */
+               for (i = 0; i < qconf->n_rx_queue; ++i) {
+
+                       portid = qconf->rx_queue_list[i].port_id;
+                       queueid = qconf->rx_queue_list[i].queue_id;
+                       nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst, MAX_PKT_BURST);
+
+                       /* Prefetch first packets */
+                       for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
+                               rte_prefetch0(rte_pktmbuf_mtod(
+                                               pkts_burst[j], void *));
+                       }
+
+                       /* Prefetch and forward already prefetched packets */
+                       for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
+                               rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
+                                               j + PREFETCH_OFFSET], void *));
+                               l3fwd_simple_forward(pkts_burst[j], portid, qconf->lookup_struct);
+                       }
+
+                       /* Forward remaining prefetched packets */
+                       for (; j < nb_rx; j++) {
+                               l3fwd_simple_forward(pkts_burst[j], portid, qconf->lookup_struct);
+                       }
+               }
+       }
+}
+
+static int
+check_lcore_params(void)
+{
+       uint8_t queue, lcore;
+       uint16_t i;
+       int socketid;
+
+       for (i = 0; i < nb_lcore_params; ++i) {
+               queue = lcore_params[i].queue_id;
+               if (queue >= MAX_RX_QUEUE_PER_PORT) {
+                       printf("invalid queue number: %hhu\n", queue);
+                       return -1;
+               }
+               lcore = lcore_params[i].lcore_id;
+               if (!rte_lcore_is_enabled(lcore)) {
+                       printf("error: lcore %hhu is not enabled in lcore mask\n", lcore);
+                       return -1;
+               }
+               if ((socketid = rte_lcore_to_socket_id(lcore) != 0) &&
+                       (numa_on == 0)) {
+                       printf("warning: lcore %hhu is on socket %d with numa off \n",
+                               lcore, socketid);
+               }
+       }
+       return 0;
+}
+
+static int
+check_port_config(const unsigned nb_ports)
+{
+       unsigned portid;
+       uint16_t i;
+
+       for (i = 0; i < nb_lcore_params; ++i) {
+               portid = lcore_params[i].port_id;
+               if ((enabled_port_mask & (1 << portid)) == 0) {
+                       printf("port %u is not enabled in port mask\n", portid);
+                       return -1;
+               }
+               if (portid >= nb_ports) {
+                       printf("port %u is not present on the board\n", portid);
+                       return -1;
+               }
+       }
+       return 0;
+}
+
+static uint8_t
+get_port_n_rx_queues(const uint8_t port)
+{
+       int queue = -1;
+       uint16_t i;
+
+       for (i = 0; i < nb_lcore_params; ++i) {
+               if (lcore_params[i].port_id == port && lcore_params[i].queue_id > queue)
+                       queue = lcore_params[i].queue_id;
+       }
+       return (uint8_t)(++queue);
+}
+
+static int
+init_lcore_rx_queues(void)
+{
+       uint16_t i, nb_rx_queue;
+       uint8_t lcore;
+
+       for (i = 0; i < nb_lcore_params; ++i) {
+               lcore = lcore_params[i].lcore_id;
+               nb_rx_queue = lcore_conf[lcore].n_rx_queue;
+               if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) {
+                       printf("error: too many queues (%u) for lcore: %u\n",
+                               (unsigned)nb_rx_queue + 1, (unsigned)lcore);
+                       return -1;
+               } else {
+                       lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id =
+                               lcore_params[i].port_id;
+                       lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id =
+                               lcore_params[i].queue_id;
+                       lcore_conf[lcore].n_rx_queue++;
+               }
+       }
+       return 0;
+}
+
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+       printf ("%s [EAL options] -- -p PORTMASK"
+               "  [--config (port,queue,lcore)[,(port,queue,lcore]]\n"
+               "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
+               "  --config (port,queue,lcore): rx queues configuration\n"
+               "  --no-numa: optional, disable numa awareness\n",
+               prgname);
+}
+
+/* Custom handling of signals to handle process terminal */
+static void
+signal_handler(int signum)
+{
+       uint8_t portid;
+       uint8_t nb_ports = rte_eth_dev_count();
+
+       /* When we receive a SIGINT signal */
+       if (signum == SIGINT) {
+               for (portid = 0; portid < nb_ports; portid++) {
+                       /* skip ports that are not enabled */
+                       if ((enabled_port_mask & (1 << portid)) == 0)
+                               continue;
+                       rte_eth_dev_close(portid);
+               }
+       }
+       rte_exit(EXIT_SUCCESS, "\n User forced exit\n");
+}
+static int
+parse_portmask(const char *portmask)
+{
+       char *end = NULL;
+       unsigned long pm;
+
+       /* parse hexadecimal string */
+       pm = strtoul(portmask, &end, 16);
+       if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+               return -1;
+
+       if (pm == 0)
+               return -1;
+
+       return pm;
+}
+
+static int
+parse_config(const char *q_arg)
+{
+       char s[256];
+       const char *p, *p0 = q_arg;
+       char *end;
+       enum fieldnames {
+               FLD_PORT = 0,
+               FLD_QUEUE,
+               FLD_LCORE,
+               _NUM_FLD
+       };
+       unsigned long int_fld[_NUM_FLD];
+       char *str_fld[_NUM_FLD];
+       int i;
+       unsigned size;
+
+       nb_lcore_params = 0;
+
+       while ((p = strchr(p0,'(')) != NULL) {
+               ++p;
+               if((p0 = strchr(p,')')) == NULL)
+                       return -1;
+
+               size = p0 - p;
+               if(size >= sizeof(s))
+                       return -1;
+
+               snprintf(s, sizeof(s), "%.*s", size, p);
+               if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD)
+                       return -1;
+               for (i = 0; i < _NUM_FLD; i++){
+                       errno = 0;
+                       int_fld[i] = strtoul(str_fld[i], &end, 0);
+                       if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
+                               return -1;
+               }
+               if (nb_lcore_params >= MAX_LCORE_PARAMS) {
+                       printf("exceeded max number of lcore params: %hu\n",
+                               nb_lcore_params);
+                       return -1;
+               }
+               lcore_params_array[nb_lcore_params].port_id = (uint8_t)int_fld[FLD_PORT];
+               lcore_params_array[nb_lcore_params].queue_id = (uint8_t)int_fld[FLD_QUEUE];
+               lcore_params_array[nb_lcore_params].lcore_id = (uint8_t)int_fld[FLD_LCORE];
+               ++nb_lcore_params;
+       }
+       lcore_params = lcore_params_array;
+       return 0;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+parse_args(int argc, char **argv)
+{
+       int opt, ret;
+       char **argvopt;
+       int option_index;
+       char *prgname = argv[0];
+       static struct option lgopts[] = {
+               {"config", 1, 0, 0},
+               {"no-numa", 0, 0, 0},
+               {NULL, 0, 0, 0}
+       };
+
+       argvopt = argv;
+
+       while ((opt = getopt_long(argc, argvopt, "p:",
+                               lgopts, &option_index)) != EOF) {
+
+               switch (opt) {
+               /* portmask */
+               case 'p':
+                       enabled_port_mask = parse_portmask(optarg);
+                       if (enabled_port_mask == 0) {
+                               printf("invalid portmask\n");
+                               print_usage(prgname);
+                               return -1;
+                       }
+                       break;
+
+               /* long options */
+               case 0:
+                       if (!strcmp(lgopts[option_index].name, "config")) {
+                               ret = parse_config(optarg);
+                               if (ret) {
+                                       printf("invalid config\n");
+                                       print_usage(prgname);
+                                       return -1;
+                               }
+                       }
+
+                       if (!strcmp(lgopts[option_index].name, "no-numa")) {
+                               printf("numa is disabled \n");
+                               numa_on = 0;
+                       }
+                       break;
+
+               default:
+                       print_usage(prgname);
+                       return -1;
+               }
+       }
+
+       if (optind >= 0)
+               argv[optind-1] = prgname;
+
+       ret = optind-1;
+       optind = 0; /* reset getopt lib */
+       return ret;
+}
+
+static void
+print_ethaddr(const char *name, const struct ether_addr *eth_addr)
+{
+       char buf[ETHER_ADDR_FMT_SIZE];
+       ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
+       printf("%s%s", name, buf);
+}
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
+static void
+setup_hash(int socketid)
+{
+       unsigned i;
+       int ret;
+       char s[64];
+
+       /* create  hashes */
+       snprintf(s, sizeof(s), "l3fwd_hash_%d", socketid);
+       l3fwd_hash_params.name = s;
+       l3fwd_hash_params.socket_id = socketid;
+       l3fwd_lookup_struct[socketid] = rte_hash_create(&l3fwd_hash_params);
+       if (l3fwd_lookup_struct[socketid] == NULL)
+               rte_exit(EXIT_FAILURE, "Unable to create the l3fwd hash on "
+                               "socket %d\n", socketid);
+
+       /* populate the hash */
+       for (i = 0; i < L3FWD_NUM_ROUTES; i++) {
+               ret = rte_hash_add_key (l3fwd_lookup_struct[socketid],
+                               (void *) &l3fwd_route_array[i].key);
+               if (ret < 0) {
+                       rte_exit(EXIT_FAILURE, "Unable to add entry %u to the"
+                               "l3fwd hash on socket %d\n", i, socketid);
+               }
+               l3fwd_out_if[ret] = l3fwd_route_array[i].if_out;
+               printf("Hash: Adding key\n");
+               print_key(l3fwd_route_array[i].key);
+       }
+}
+#endif
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
+static void
+setup_lpm(int socketid)
+{
+       unsigned i;
+       int ret;
+       char s[64];
+
+       struct rte_lpm_config lpm_ipv4_config;
+
+       lpm_ipv4_config.max_rules = L3FWD_LPM_MAX_RULES;
+       lpm_ipv4_config.number_tbl8s = 256;
+       lpm_ipv4_config.flags = 0;
+
+       /* create the LPM table */
+       snprintf(s, sizeof(s), "L3FWD_LPM_%d", socketid);
+       l3fwd_lookup_struct[socketid] =
+                       rte_lpm_create(s, socketid, &lpm_ipv4_config);
+       if (l3fwd_lookup_struct[socketid] == NULL)
+               rte_exit(EXIT_FAILURE, "Unable to create the l3fwd LPM table"
+                               " on socket %d\n", socketid);
+
+       /* populate the LPM table */
+       for (i = 0; i < L3FWD_NUM_ROUTES; i++) {
+               ret = rte_lpm_add(l3fwd_lookup_struct[socketid],
+                       l3fwd_route_array[i].ip,
+                       l3fwd_route_array[i].depth,
+                       l3fwd_route_array[i].if_out);
+
+               if (ret < 0) {
+                       rte_exit(EXIT_FAILURE, "Unable to add entry %u to the "
+                               "l3fwd LPM table on socket %d\n",
+                               i, socketid);
+               }
+
+               printf("LPM: Adding route 0x%08x / %d (%d)\n",
+                       (unsigned)l3fwd_route_array[i].ip,
+                       l3fwd_route_array[i].depth,
+                       l3fwd_route_array[i].if_out);
+       }
+}
+#endif
+
+static int
+init_mem(unsigned nb_mbuf)
+{
+       struct lcore_conf *qconf;
+       int socketid;
+       unsigned lcore_id;
+       char s[64];
+
+       for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+               if (rte_lcore_is_enabled(lcore_id) == 0)
+                       continue;
+
+               if (numa_on)
+                       socketid = rte_lcore_to_socket_id(lcore_id);
+               else
+                       socketid = 0;
+
+               if (socketid >= NB_SOCKETS) {
+                       rte_exit(EXIT_FAILURE, "Socket %d of lcore %u is out of range %d\n",
+                               socketid, lcore_id, NB_SOCKETS);
+               }
+               if (pktmbuf_pool[socketid] == NULL) {
+                       snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
+                       pktmbuf_pool[socketid] = rte_pktmbuf_pool_create(s,
+                               nb_mbuf, MEMPOOL_CACHE_SIZE, 0,
+                               RTE_MBUF_DEFAULT_BUF_SIZE, socketid);
+                       if (pktmbuf_pool[socketid] == NULL)
+                               rte_exit(EXIT_FAILURE, "Cannot init mbuf pool on socket %d\n", socketid);
+                       else
+                               printf("Allocated mbuf pool on socket %d\n", socketid);
+
+#if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
+                       setup_lpm(socketid);
+#else
+                       setup_hash(socketid);
+#endif
+               }
+               qconf = &lcore_conf[lcore_id];
+               qconf->lookup_struct = l3fwd_lookup_struct[socketid];
+       }
+       return 0;
+}
+
+int
+main(int argc, char **argv)
+{
+       struct lcore_conf *qconf;
+       struct rte_eth_dev_info dev_info;
+       struct rte_eth_txconf *txconf;
+       int ret;
+       unsigned nb_ports;
+       uint16_t queueid;
+       unsigned lcore_id;
+       uint32_t nb_lcores;
+       uint16_t n_tx_queue;
+       uint8_t portid, nb_rx_queue, queue, socketid;
+
+       signal(SIGINT, signal_handler);
+       /* init EAL */
+       ret = rte_eal_init(argc, argv);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
+       argc -= ret;
+       argv += ret;
+
+       /* parse application arguments (after the EAL ones) */
+       ret = parse_args(argc, argv);
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "Invalid L3FWD-VF parameters\n");
+
+       if (check_lcore_params() < 0)
+               rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
+
+       ret = init_lcore_rx_queues();
+       if (ret < 0)
+               rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
+
+       nb_ports = rte_eth_dev_count();
+       if (nb_ports > RTE_MAX_ETHPORTS)
+               nb_ports = RTE_MAX_ETHPORTS;
+
+       if (check_port_config(nb_ports) < 0)
+               rte_exit(EXIT_FAILURE, "check_port_config failed\n");
+
+       nb_lcores = rte_lcore_count();
+
+       /* initialize all ports */
+       for (portid = 0; portid < nb_ports; portid++) {
+               /* skip ports that are not enabled */
+               if ((enabled_port_mask & (1 << portid)) == 0) {
+                       printf("\nSkipping disabled port %d\n", portid);
+                       continue;
+               }
+
+               /* init port */
+               printf("Initializing port %d ... ", portid );
+               fflush(stdout);
+
+               /* must always equal(=1) */
+               nb_rx_queue = get_port_n_rx_queues(portid);
+               n_tx_queue = MAX_TX_QUEUE_PER_PORT;
+
+               printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
+                       nb_rx_queue, (unsigned)1 );
+               ret = rte_eth_dev_configure(portid, nb_rx_queue, n_tx_queue, &port_conf);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n",
+                               ret, portid);
+
+               rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
+               print_ethaddr(" Address:", &ports_eth_addr[portid]);
+               printf(", ");
+
+               ret = init_mem(NB_MBUF);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE, "init_mem failed\n");
+
+               /* init one TX queue */
+               socketid = (uint8_t)rte_lcore_to_socket_id(rte_get_master_lcore());
+
+               printf("txq=%d,%d,%d ", portid, 0, socketid);
+               fflush(stdout);
+
+               rte_eth_dev_info_get(portid, &dev_info);
+               txconf = &dev_info.default_txconf;
+               if (port_conf.rxmode.jumbo_frame)
+                       txconf->txq_flags = 0;
+               ret = rte_eth_tx_queue_setup(portid, 0, nb_txd,
+                                                socketid, txconf);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, "
+                               "port=%d\n", ret, portid);
+
+               printf("\n");
+       }
+
+       for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+               if (rte_lcore_is_enabled(lcore_id) == 0)
+                       continue;
+               qconf = &lcore_conf[lcore_id];
+               qconf->tx_queue_id = 0;
+
+               printf("\nInitializing rx queues on lcore %u ... ", lcore_id );
+               fflush(stdout);
+               /* init RX queues */
+               for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
+                       portid = qconf->rx_queue_list[queue].port_id;
+                       queueid = qconf->rx_queue_list[queue].queue_id;
+
+                       if (numa_on)
+                               socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id);
+                       else
+                               socketid = 0;
+
+                       printf("rxq=%d,%d,%d ", portid, queueid, socketid);
+                       fflush(stdout);
+
+                       ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
+                                               socketid, NULL,
+                                               pktmbuf_pool[socketid]);
+                       if (ret < 0)
+                               rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d,"
+                                               "port=%d\n", ret, portid);
+               }
+       }
+       printf("\n");
+
+       /* start ports */
+       for (portid = 0; portid < nb_ports; portid++) {
+               if ((enabled_port_mask & (1 << portid)) == 0) {
+                       continue;
+               }
+               /* Start device */
+               ret = rte_eth_dev_start(portid);
+               if (ret < 0)
+                       rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, port=%d\n",
+                               ret, portid);
+
+               printf("done: Port %d\n", portid);
+
+       }
+
+       /* launch per-lcore init on every lcore */
+       rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
+       RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+               if (rte_eal_wait_lcore(lcore_id) < 0)
+                       return -1;
+       }
+
+       return 0;
+}