--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2015 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This application is a simple Layer 2 PTP v2 client. It shows delta values
+ * which are used to synchronize the PHC clock. if the "-T 1" parameter is
+ * passed to the application the Linux kernel clock is also synchronized.
+ */
+
+#include <stdint.h>
+#include <inttypes.h>
+#include <rte_eal.h>
+#include <rte_ethdev.h>
+#include <rte_cycles.h>
+#include <rte_lcore.h>
+#include <rte_mbuf.h>
+#include <rte_ip.h>
+#include <limits.h>
+#include <sys/time.h>
+#include <getopt.h>
+
+#define RX_RING_SIZE 128
+#define TX_RING_SIZE 512
+
+#define NUM_MBUFS 8191
+#define MBUF_CACHE_SIZE 250
+
+/* Values for the PTP messageType field. */
+#define SYNC 0x0
+#define DELAY_REQ 0x1
+#define PDELAY_REQ 0x2
+#define PDELAY_RESP 0x3
+#define FOLLOW_UP 0x8
+#define DELAY_RESP 0x9
+#define PDELAY_RESP_FOLLOW_UP 0xA
+#define ANNOUNCE 0xB
+#define SIGNALING 0xC
+#define MANAGEMENT 0xD
+
+#define NSEC_PER_SEC 1000000000L
+#define KERNEL_TIME_ADJUST_LIMIT 20000
+#define PTP_PROTOCOL 0x88F7
+
+struct rte_mempool *mbuf_pool;
+uint32_t ptp_enabled_port_mask;
+uint8_t ptp_enabled_port_nb;
+static uint8_t ptp_enabled_ports[RTE_MAX_ETHPORTS];
+
+static const struct rte_eth_conf port_conf_default = {
+ .rxmode = { .max_rx_pkt_len = ETHER_MAX_LEN }
+};
+
+static const struct ether_addr ether_multicast = {
+ .addr_bytes = {0x01, 0x1b, 0x19, 0x0, 0x0, 0x0}
+};
+
+/* Structs used for PTP handling. */
+struct tstamp {
+ uint16_t sec_msb;
+ uint32_t sec_lsb;
+ uint32_t ns;
+} __attribute__((packed));
+
+struct clock_id {
+ uint8_t id[8];
+};
+
+struct port_id {
+ struct clock_id clock_id;
+ uint16_t port_number;
+} __attribute__((packed));
+
+struct ptp_header {
+ uint8_t msg_type;
+ uint8_t ver;
+ uint16_t message_length;
+ uint8_t domain_number;
+ uint8_t reserved1;
+ uint8_t flag_field[2];
+ int64_t correction;
+ uint32_t reserved2;
+ struct port_id source_port_id;
+ uint16_t seq_id;
+ uint8_t control;
+ int8_t log_message_interval;
+} __attribute__((packed));
+
+struct sync_msg {
+ struct ptp_header hdr;
+ struct tstamp origin_tstamp;
+} __attribute__((packed));
+
+struct follow_up_msg {
+ struct ptp_header hdr;
+ struct tstamp precise_origin_tstamp;
+ uint8_t suffix[0];
+} __attribute__((packed));
+
+struct delay_req_msg {
+ struct ptp_header hdr;
+ struct tstamp origin_tstamp;
+} __attribute__((packed));
+
+struct delay_resp_msg {
+ struct ptp_header hdr;
+ struct tstamp rx_tstamp;
+ struct port_id req_port_id;
+ uint8_t suffix[0];
+} __attribute__((packed));
+
+struct ptp_message {
+ union {
+ struct ptp_header header;
+ struct sync_msg sync;
+ struct delay_req_msg delay_req;
+ struct follow_up_msg follow_up;
+ struct delay_resp_msg delay_resp;
+ } __attribute__((packed));
+};
+
+struct ptpv2_data_slave_ordinary {
+ struct rte_mbuf *m;
+ struct timespec tstamp1;
+ struct timespec tstamp2;
+ struct timespec tstamp3;
+ struct timespec tstamp4;
+ struct clock_id client_clock_id;
+ struct clock_id master_clock_id;
+ struct timeval new_adj;
+ int64_t delta;
+ uint8_t portid;
+ uint16_t seqID_SYNC;
+ uint16_t seqID_FOLLOWUP;
+ uint8_t ptpset;
+ uint8_t kernel_time_set;
+ uint8_t current_ptp_port;
+};
+
+static struct ptpv2_data_slave_ordinary ptp_data;
+
+static inline uint64_t timespec64_to_ns(const struct timespec *ts)
+{
+ return ((uint64_t) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec;
+}
+
+static struct timeval
+ns_to_timeval(int64_t nsec)
+{
+ struct timespec t_spec = {0, 0};
+ struct timeval t_eval = {0, 0};
+ int32_t rem;
+
+ if (nsec == 0)
+ return t_eval;
+ rem = nsec % NSEC_PER_SEC;
+ t_spec.tv_sec = nsec / NSEC_PER_SEC;
+
+ if (rem < 0) {
+ t_spec.tv_sec--;
+ rem += NSEC_PER_SEC;
+ }
+
+ t_spec.tv_nsec = rem;
+ t_eval.tv_sec = t_spec.tv_sec;
+ t_eval.tv_usec = t_spec.tv_nsec / 1000;
+
+ return t_eval;
+}
+
+/*
+ * Initializes a given port using global settings and with the RX buffers
+ * coming from the mbuf_pool passed as a parameter.
+ */
+static inline int
+port_init(uint8_t port, struct rte_mempool *mbuf_pool)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_conf port_conf = port_conf_default;
+ const uint16_t rx_rings = 1;
+ const uint16_t tx_rings = 1;
+ int retval;
+ uint16_t q;
+
+ if (port >= rte_eth_dev_count())
+ return -1;
+
+ /* Configure the Ethernet device. */
+ retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ /* Allocate and set up 1 RX queue per Ethernet port. */
+ for (q = 0; q < rx_rings; q++) {
+ retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
+ rte_eth_dev_socket_id(port), NULL, mbuf_pool);
+
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Allocate and set up 1 TX queue per Ethernet port. */
+ for (q = 0; q < tx_rings; q++) {
+ /* Setup txq_flags */
+ struct rte_eth_txconf *txconf;
+
+ rte_eth_dev_info_get(q, &dev_info);
+ txconf = &dev_info.default_txconf;
+ txconf->txq_flags = 0;
+
+ retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
+ rte_eth_dev_socket_id(port), txconf);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Start the Ethernet port. */
+ retval = rte_eth_dev_start(port);
+ if (retval < 0)
+ return retval;
+
+ /* Enable timesync timestamping for the Ethernet device */
+ rte_eth_timesync_enable(port);
+
+ /* Enable RX in promiscuous mode for the Ethernet device. */
+ rte_eth_promiscuous_enable(port);
+
+ return 0;
+}
+
+static void
+print_clock_info(struct ptpv2_data_slave_ordinary *ptp_data)
+{
+ int64_t nsec;
+ struct timespec net_time, sys_time;
+
+ printf("Master Clock id: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
+ ptp_data->master_clock_id.id[0],
+ ptp_data->master_clock_id.id[1],
+ ptp_data->master_clock_id.id[2],
+ ptp_data->master_clock_id.id[3],
+ ptp_data->master_clock_id.id[4],
+ ptp_data->master_clock_id.id[5],
+ ptp_data->master_clock_id.id[6],
+ ptp_data->master_clock_id.id[7]);
+
+ printf("\nT2 - Slave Clock. %lds %ldns",
+ (ptp_data->tstamp2.tv_sec),
+ (ptp_data->tstamp2.tv_nsec));
+
+ printf("\nT1 - Master Clock. %lds %ldns ",
+ ptp_data->tstamp1.tv_sec,
+ (ptp_data->tstamp1.tv_nsec));
+
+ printf("\nT3 - Slave Clock. %lds %ldns",
+ ptp_data->tstamp3.tv_sec,
+ (ptp_data->tstamp3.tv_nsec));
+
+ printf("\nT4 - Master Clock. %lds %ldns ",
+ ptp_data->tstamp4.tv_sec,
+ (ptp_data->tstamp4.tv_nsec));
+
+ printf("\nDelta between master and slave clocks:%"PRId64"ns\n",
+ ptp_data->delta);
+
+ clock_gettime(CLOCK_REALTIME, &sys_time);
+ rte_eth_timesync_read_time(ptp_data->current_ptp_port, &net_time);
+
+ time_t ts = net_time.tv_sec;
+
+ printf("\n\nComparison between Linux kernel Time and PTP:");
+
+ printf("\nCurrent PTP Time: %.24s %.9ld ns",
+ ctime(&ts), net_time.tv_nsec);
+
+ nsec = (int64_t)timespec64_to_ns(&net_time) -
+ (int64_t)timespec64_to_ns(&sys_time);
+ ptp_data->new_adj = ns_to_timeval(nsec);
+
+ gettimeofday(&ptp_data->new_adj, NULL);
+
+ time_t tp = ptp_data->new_adj.tv_sec;
+
+ printf("\nCurrent SYS Time: %.24s %.6ld ns",
+ ctime(&tp), ptp_data->new_adj.tv_usec);
+
+ printf("\nDelta between PTP and Linux Kernel time:%"PRId64"ns\n",
+ nsec);
+
+ printf("[Ctrl+C to quit]\n");
+
+ /* Clear screen and put cursor in column 1, row 1 */
+ printf("\033[2J\033[1;1H");
+}
+
+static int64_t
+delta_eval(struct ptpv2_data_slave_ordinary *ptp_data)
+{
+ int64_t delta;
+ uint64_t t1 = 0;
+ uint64_t t2 = 0;
+ uint64_t t3 = 0;
+ uint64_t t4 = 0;
+
+ t1 = timespec64_to_ns(&ptp_data->tstamp1);
+ t2 = timespec64_to_ns(&ptp_data->tstamp2);
+ t3 = timespec64_to_ns(&ptp_data->tstamp3);
+ t4 = timespec64_to_ns(&ptp_data->tstamp4);
+
+ delta = -((int64_t)((t2 - t1) - (t4 - t3))) / 2;
+
+ return delta;
+}
+
+/*
+ * Parse the PTP SYNC message.
+ */
+static void
+parse_sync(struct ptpv2_data_slave_ordinary *ptp_data, uint16_t rx_tstamp_idx)
+{
+ struct ptp_header *ptp_hdr;
+
+ ptp_hdr = (struct ptp_header *)(rte_pktmbuf_mtod(ptp_data->m, char *)
+ + sizeof(struct ether_hdr));
+ ptp_data->seqID_SYNC = rte_be_to_cpu_16(ptp_hdr->seq_id);
+
+ if (ptp_data->ptpset == 0) {
+ rte_memcpy(&ptp_data->master_clock_id,
+ &ptp_hdr->source_port_id.clock_id,
+ sizeof(struct clock_id));
+ ptp_data->ptpset = 1;
+ }
+
+ if (memcmp(&ptp_hdr->source_port_id.clock_id,
+ &ptp_hdr->source_port_id.clock_id,
+ sizeof(struct clock_id)) == 0) {
+
+ if (ptp_data->ptpset == 1)
+ rte_eth_timesync_read_rx_timestamp(ptp_data->portid,
+ &ptp_data->tstamp2, rx_tstamp_idx);
+ }
+
+}
+
+/*
+ * Parse the PTP FOLLOWUP message and send DELAY_REQ to the master clock.
+ */
+static void
+parse_fup(struct ptpv2_data_slave_ordinary *ptp_data)
+{
+ struct ether_hdr *eth_hdr;
+ struct ptp_header *ptp_hdr;
+ struct clock_id *client_clkid;
+ struct ptp_message *ptp_msg;
+ struct rte_mbuf *created_pkt;
+ struct tstamp *origin_tstamp;
+ struct ether_addr eth_multicast = ether_multicast;
+ size_t pkt_size;
+ int wait_us;
+ struct rte_mbuf *m = ptp_data->m;
+
+ eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ ptp_hdr = (struct ptp_header *)(rte_pktmbuf_mtod(m, char *)
+ + sizeof(struct ether_hdr));
+ if (memcmp(&ptp_data->master_clock_id,
+ &ptp_hdr->source_port_id.clock_id,
+ sizeof(struct clock_id)) != 0)
+ return;
+
+ ptp_data->seqID_FOLLOWUP = rte_be_to_cpu_16(ptp_hdr->seq_id);
+ ptp_msg = (struct ptp_message *) (rte_pktmbuf_mtod(m, char *) +
+ sizeof(struct ether_hdr));
+
+ origin_tstamp = &ptp_msg->follow_up.precise_origin_tstamp;
+ ptp_data->tstamp1.tv_nsec = ntohl(origin_tstamp->ns);
+ ptp_data->tstamp1.tv_sec =
+ ((uint64_t)ntohl(origin_tstamp->sec_lsb)) |
+ (((uint64_t)ntohs(origin_tstamp->sec_msb)) << 32);
+
+ if (ptp_data->seqID_FOLLOWUP == ptp_data->seqID_SYNC) {
+
+ created_pkt = rte_pktmbuf_alloc(mbuf_pool);
+ pkt_size = sizeof(struct ether_hdr) +
+ sizeof(struct ptp_message);
+ created_pkt->data_len = pkt_size;
+ created_pkt->pkt_len = pkt_size;
+ eth_hdr = rte_pktmbuf_mtod(created_pkt, struct ether_hdr *);
+ rte_eth_macaddr_get(ptp_data->portid, ð_hdr->s_addr);
+
+ /* Set multicast address 01-1B-19-00-00-00. */
+ ether_addr_copy(ð_multicast, ð_hdr->d_addr);
+
+ eth_hdr->ether_type = htons(PTP_PROTOCOL);
+ ptp_msg = (struct ptp_message *)
+ (rte_pktmbuf_mtod(created_pkt, char *) +
+ sizeof(struct ether_hdr));
+
+ ptp_msg->delay_req.hdr.seq_id = htons(ptp_data->seqID_SYNC);
+ ptp_msg->delay_req.hdr.msg_type = DELAY_REQ;
+ ptp_msg->delay_req.hdr.ver = 2;
+ ptp_msg->delay_req.hdr.control = 1;
+ ptp_msg->delay_req.hdr.log_message_interval = 127;
+
+ /* Set up clock id. */
+ client_clkid =
+ &ptp_msg->delay_req.hdr.source_port_id.clock_id;
+
+ client_clkid->id[0] = eth_hdr->s_addr.addr_bytes[0];
+ client_clkid->id[1] = eth_hdr->s_addr.addr_bytes[1];
+ client_clkid->id[2] = eth_hdr->s_addr.addr_bytes[2];
+ client_clkid->id[3] = 0xFF;
+ client_clkid->id[4] = 0xFE;
+ client_clkid->id[5] = eth_hdr->s_addr.addr_bytes[3];
+ client_clkid->id[6] = eth_hdr->s_addr.addr_bytes[4];
+ client_clkid->id[7] = eth_hdr->s_addr.addr_bytes[5];
+
+ rte_memcpy(&ptp_data->client_clock_id,
+ client_clkid,
+ sizeof(struct clock_id));
+
+ /* Enable flag for hardware timestamping. */
+ created_pkt->ol_flags |= PKT_TX_IEEE1588_TMST;
+
+ /*Read value from NIC to prevent latching with old value. */
+ rte_eth_timesync_read_tx_timestamp(ptp_data->portid,
+ &ptp_data->tstamp3);
+
+ /* Transmit the packet. */
+ rte_eth_tx_burst(ptp_data->portid, 0, &created_pkt, 1);
+
+ wait_us = 0;
+ ptp_data->tstamp3.tv_nsec = 0;
+ ptp_data->tstamp3.tv_sec = 0;
+
+ /* Wait at least 1 us to read TX timestamp. */
+ while ((rte_eth_timesync_read_tx_timestamp(ptp_data->portid,
+ &ptp_data->tstamp3) < 0) && (wait_us < 1000)) {
+ rte_delay_us(1);
+ wait_us++;
+ }
+ }
+}
+
+/*
+ * Update the kernel time with the difference between it and the current NIC
+ * time.
+ */
+static inline void
+update_kernel_time(void)
+{
+ int64_t nsec;
+ struct timespec net_time, sys_time;
+
+ clock_gettime(CLOCK_REALTIME, &sys_time);
+ rte_eth_timesync_read_time(ptp_data.current_ptp_port, &net_time);
+
+ nsec = (int64_t)timespec64_to_ns(&net_time) -
+ (int64_t)timespec64_to_ns(&sys_time);
+
+ ptp_data.new_adj = ns_to_timeval(nsec);
+
+ /*
+ * If difference between kernel time and system time in NIC is too big
+ * (more than +/- 20 microseconds), use clock_settime to set directly
+ * the kernel time, as adjtime is better for small adjustments (takes
+ * longer to adjust the time).
+ */
+
+ if (nsec > KERNEL_TIME_ADJUST_LIMIT || nsec < -KERNEL_TIME_ADJUST_LIMIT)
+ clock_settime(CLOCK_REALTIME, &net_time);
+ else
+ adjtime(&ptp_data.new_adj, 0);
+
+
+}
+
+/*
+ * Parse the DELAY_RESP message.
+ */
+static void
+parse_drsp(struct ptpv2_data_slave_ordinary *ptp_data)
+{
+ struct rte_mbuf *m = ptp_data->m;
+ struct ptp_message *ptp_msg;
+ struct tstamp *rx_tstamp;
+ uint16_t seq_id;
+
+ ptp_msg = (struct ptp_message *) (rte_pktmbuf_mtod(m, char *) +
+ sizeof(struct ether_hdr));
+ seq_id = rte_be_to_cpu_16(ptp_msg->delay_resp.hdr.seq_id);
+ if (memcmp(&ptp_data->client_clock_id,
+ &ptp_msg->delay_resp.req_port_id.clock_id,
+ sizeof(struct clock_id)) == 0) {
+ if (seq_id == ptp_data->seqID_FOLLOWUP) {
+ rx_tstamp = &ptp_msg->delay_resp.rx_tstamp;
+ ptp_data->tstamp4.tv_nsec = ntohl(rx_tstamp->ns);
+ ptp_data->tstamp4.tv_sec =
+ ((uint64_t)ntohl(rx_tstamp->sec_lsb)) |
+ (((uint64_t)ntohs(rx_tstamp->sec_msb)) << 32);
+
+ /* Evaluate the delta for adjustment. */
+ ptp_data->delta = delta_eval(ptp_data);
+
+ rte_eth_timesync_adjust_time(ptp_data->portid,
+ ptp_data->delta);
+
+ ptp_data->current_ptp_port = ptp_data->portid;
+
+ /* Update kernel time if enabled in app parameters. */
+ if (ptp_data->kernel_time_set == 1)
+ update_kernel_time();
+
+
+
+ }
+ }
+}
+
+/* This function processes PTP packets, implementing slave PTP IEEE1588 L2
+ * functionality.
+ */
+static void
+parse_ptp_frames(uint8_t portid, struct rte_mbuf *m) {
+ struct ptp_header *ptp_hdr;
+ struct ether_hdr *eth_hdr;
+ uint16_t eth_type;
+
+ eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ eth_type = rte_be_to_cpu_16(eth_hdr->ether_type);
+
+ if (eth_type == PTP_PROTOCOL) {
+ ptp_data.m = m;
+ ptp_data.portid = portid;
+ ptp_hdr = (struct ptp_header *)(rte_pktmbuf_mtod(m, char *)
+ + sizeof(struct ether_hdr));
+
+ switch (ptp_hdr->msg_type) {
+ case SYNC:
+ parse_sync(&ptp_data, m->timesync);
+ break;
+ case FOLLOW_UP:
+ parse_fup(&ptp_data);
+ break;
+ case DELAY_RESP:
+ parse_drsp(&ptp_data);
+ print_clock_info(&ptp_data);
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/*
+ * The lcore main. This is the main thread that does the work, reading from an
+ * input port and writing to an output port.
+ */
+static __attribute__((noreturn)) void
+lcore_main(void)
+{
+ uint8_t portid;
+ unsigned nb_rx;
+ struct rte_mbuf *m;
+
+ /*
+ * Check that the port is on the same NUMA node as the polling thread
+ * for best performance.
+ */
+ printf("\nCore %u Waiting for SYNC packets. [Ctrl+C to quit]\n",
+ rte_lcore_id());
+
+ /* Run until the application is quit or killed. */
+
+ while (1) {
+ /* Read packet from RX queues. */
+ for (portid = 0; portid < ptp_enabled_port_nb; portid++) {
+
+ portid = ptp_enabled_ports[portid];
+ nb_rx = rte_eth_rx_burst(portid, 0, &m, 1);
+
+ if (likely(nb_rx == 0))
+ continue;
+
+ if (m->ol_flags & PKT_RX_IEEE1588_PTP)
+ parse_ptp_frames(portid, m);
+
+ rte_pktmbuf_free(m);
+ }
+ }
+}
+
+static void
+print_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK -T VALUE\n"
+ " -T VALUE: 0 - Disable, 1 - Enable Linux Clock"
+ " Synchronization (0 default)\n"
+ " -p PORTMASK: hexadecimal bitmask of ports to configure\n",
+ prgname);
+}
+
+static int
+ptp_parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* Parse the hexadecimal string. */
+ pm = strtoul(portmask, &end, 16);
+
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+static int
+parse_ptp_kernel(const char *param)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* Parse the hexadecimal string. */
+ pm = strtoul(param, &end, 16);
+
+ if ((param[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+ if (pm == 0)
+ return 0;
+
+ return 1;
+}
+
+/* Parse the commandline arguments. */
+static int
+ptp_parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ char **argvopt;
+ int option_index;
+ char *prgname = argv[0];
+ static struct option lgopts[] = { {NULL, 0, 0, 0} };
+
+ argvopt = argv;
+
+ while ((opt = getopt_long(argc, argvopt, "p:T:",
+ lgopts, &option_index)) != EOF) {
+
+ switch (opt) {
+
+ /* Portmask. */
+ case 'p':
+ ptp_enabled_port_mask = ptp_parse_portmask(optarg);
+ if (ptp_enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+ /* Time synchronization. */
+ case 'T':
+ ret = parse_ptp_kernel(optarg);
+ if (ret < 0) {
+ print_usage(prgname);
+ return -1;
+ }
+
+ ptp_data.kernel_time_set = ret;
+ break;
+
+ default:
+ print_usage(prgname);
+ return -1;
+ }
+ }
+
+ argv[optind-1] = prgname;
+
+ optind = 0; /* Reset getopt lib. */
+
+ return 0;
+}
+
+/*
+ * The main function, which does initialization and calls the per-lcore
+ * functions.
+ */
+int
+main(int argc, char *argv[])
+{
+ unsigned nb_ports;
+
+ uint8_t portid;
+
+ /* Initialize the Environment Abstraction Layer (EAL). */
+ int ret = rte_eal_init(argc, argv);
+
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+
+ memset(&ptp_data, '\0', sizeof(struct ptpv2_data_slave_ordinary));
+
+ argc -= ret;
+ argv += ret;
+
+ ret = ptp_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with PTP initialization\n");
+
+ /* Check that there is an even number of ports to send/receive on. */
+ nb_ports = rte_eth_dev_count();
+
+ /* Creates a new mempool in memory to hold the mbufs. */
+ mbuf_pool = rte_pktmbuf_pool_create("MBUF_POOL", NUM_MBUFS * nb_ports,
+ MBUF_CACHE_SIZE, 0, RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ /* Initialize all ports. */
+ for (portid = 0; portid < nb_ports; portid++) {
+ if ((ptp_enabled_port_mask & (1 << portid)) != 0) {
+ if (port_init(portid, mbuf_pool) == 0) {
+ ptp_enabled_ports[ptp_enabled_port_nb] = portid;
+ ptp_enabled_port_nb++;
+ } else {
+ rte_exit(EXIT_FAILURE,
+ "Cannot init port %"PRIu8 "\n",
+ portid);
+ }
+ } else
+ printf("Skipping disabled port %u\n", portid);
+ }
+
+ if (ptp_enabled_port_nb == 0) {
+ rte_exit(EXIT_FAILURE,
+ "All available ports are disabled."
+ " Please set portmask.\n");
+ }
+
+ if (rte_lcore_count() > 1)
+ printf("\nWARNING: Too many lcores enabled. Only 1 used.\n");
+
+ /* Call lcore_main on the master core only. */
+ lcore_main();
+
+ return 0;
+}
Code Review / deb_dpdk.git / blobdiff