--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <unistd.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+#include <rte_memory.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_debug.h>
+#include <rte_cycles.h>
+
+/* allow application scheduling of the services */
+#include <rte_service.h>
+
+/* Allow application registration of its own services. An application does not
+ * have to register services, but it can be useful if it wishes to run a
+ * function on a core that is otherwise in use as a service core. In this
+ * example, all services are dummy services registered by the sample app itself.
+ */
+#include <rte_service_component.h>
+
+#define PROFILE_CORES_MAX 8
+#define PROFILE_SERVICE_PER_CORE 5
+
+/* dummy function to do "work" */
+static int32_t service_func(void *args)
+{
+ RTE_SET_USED(args);
+ rte_delay_us(2000);
+ return 0;
+}
+
+static struct rte_service_spec services[] = {
+ {"service_1", service_func, NULL, 0, 0},
+ {"service_2", service_func, NULL, 0, 0},
+ {"service_3", service_func, NULL, 0, 0},
+ {"service_4", service_func, NULL, 0, 0},
+ {"service_5", service_func, NULL, 0, 0},
+};
+#define NUM_SERVICES RTE_DIM(services)
+
+/* this struct holds the mapping of a particular core to all services */
+struct profile_for_core {
+ uint32_t mapped_services[PROFILE_SERVICE_PER_CORE];
+};
+
+/* struct that can be applied as the service core mapping. Items in this
+ * struct will be passed to the ordinary rte_service_* APIs to configure the
+ * service cores at runtime, based on the requirements.
+ *
+ * These profiles can be considered a "configuration" for the service cores,
+ * where switching profile just changes the number of cores and the mappings
+ * for each of them. As a result, the core requirements and performance of the
+ * application scales.
+ */
+struct profile {
+ char name[64];
+ uint32_t num_cores;
+ struct profile_for_core cores[PROFILE_CORES_MAX];
+};
+
+static struct profile profiles[] = {
+ /* profile 0: high performance */
+ {
+ .name = "High Performance",
+ .num_cores = 5,
+ .cores[0] = {.mapped_services = {1, 0, 0, 0, 0} },
+ .cores[1] = {.mapped_services = {0, 1, 0, 0, 0} },
+ .cores[2] = {.mapped_services = {0, 0, 1, 0, 0} },
+ .cores[3] = {.mapped_services = {0, 0, 0, 1, 0} },
+ .cores[4] = {.mapped_services = {0, 0, 0, 0, 1} },
+ },
+ /* profile 1: mid performance with single service priority */
+ {
+ .name = "Mid-High Performance",
+ .num_cores = 3,
+ .cores[0] = {.mapped_services = {1, 1, 0, 0, 0} },
+ .cores[1] = {.mapped_services = {0, 0, 1, 1, 0} },
+ .cores[2] = {.mapped_services = {0, 0, 0, 0, 1} },
+ .cores[3] = {.mapped_services = {0, 0, 0, 0, 0} },
+ .cores[4] = {.mapped_services = {0, 0, 0, 0, 0} },
+ },
+ /* profile 2: mid performance with single service priority */
+ {
+ .name = "Mid-Low Performance",
+ .num_cores = 2,
+ .cores[0] = {.mapped_services = {1, 1, 1, 0, 0} },
+ .cores[1] = {.mapped_services = {1, 1, 0, 1, 1} },
+ .cores[2] = {.mapped_services = {0, 0, 0, 0, 0} },
+ .cores[3] = {.mapped_services = {0, 0, 0, 0, 0} },
+ .cores[4] = {.mapped_services = {0, 0, 0, 0, 0} },
+ },
+ /* profile 3: scale down performance on single core */
+ {
+ .name = "Scale down performance",
+ .num_cores = 1,
+ .cores[0] = {.mapped_services = {1, 1, 1, 1, 1} },
+ .cores[1] = {.mapped_services = {0, 0, 0, 0, 0} },
+ .cores[2] = {.mapped_services = {0, 0, 0, 0, 0} },
+ .cores[3] = {.mapped_services = {0, 0, 0, 0, 0} },
+ .cores[4] = {.mapped_services = {0, 0, 0, 0, 0} },
+ },
+};
+#define NUM_PROFILES RTE_DIM(profiles)
+
+static void
+apply_profile(int profile_id)
+{
+ uint32_t i;
+ uint32_t s;
+ int ret;
+ struct profile *p = &profiles[profile_id];
+ const uint8_t core_off = 1;
+
+ for (i = 0; i < p->num_cores; i++) {
+ uint32_t core = i + core_off;
+ ret = rte_service_lcore_add(core);
+ if (ret && ret != -EALREADY)
+ printf("core %d added ret %d\n", core, ret);
+
+ ret = rte_service_lcore_start(core);
+ if (ret && ret != -EALREADY)
+ printf("core %d start ret %d\n", core, ret);
+
+ for (s = 0; s < NUM_SERVICES; s++) {
+ if (rte_service_map_lcore_set(s, core,
+ p->cores[i].mapped_services[s]))
+ printf("failed to map lcore %d\n", core);
+ }
+ }
+
+ for ( ; i < PROFILE_CORES_MAX; i++) {
+ uint32_t core = i + core_off;
+ for (s = 0; s < NUM_SERVICES; s++) {
+ ret = rte_service_map_lcore_set(s, core, 0);
+ if (ret && ret != -EINVAL) {
+ printf("%s %d: map lcore set = %d\n", __func__,
+ __LINE__, ret);
+ }
+ }
+ ret = rte_service_lcore_stop(core);
+ if (ret && ret != -EALREADY) {
+ printf("%s %d: lcore stop = %d\n", __func__,
+ __LINE__, ret);
+ }
+ ret = rte_service_lcore_del(core);
+ if (ret && ret != -EINVAL) {
+ printf("%s %d: lcore del = %d\n", __func__,
+ __LINE__, ret);
+ }
+ }
+}
+
+int
+main(int argc, char **argv)
+{
+ int ret;
+
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ uint32_t i;
+ for (i = 0; i < NUM_SERVICES; i++) {
+ services[i].callback_userdata = 0;
+ uint32_t id;
+ ret = rte_service_component_register(&services[i], &id);
+ if (ret)
+ rte_exit(-1, "service register() failed");
+
+ /* set the service itself to be ready to run. In the case of
+ * ethdev, eventdev etc PMDs, this will be set when the
+ * appropriate configure or setup function is called.
+ */
+ rte_service_component_runstate_set(id, 1);
+
+ /* Collect statistics for the service */
+ rte_service_set_stats_enable(id, 1);
+
+ /* the application sets the service to be active. Note that the
+ * previous component_runstate_set() is the PMD indicating
+ * ready, while this function is the application setting the
+ * service to run. Applications can choose to not run a service
+ * by setting runstate to 0 at any time.
+ */
+ ret = rte_service_runstate_set(id, 1);
+ if (ret)
+ return -ENOEXEC;
+ }
+
+ i = 0;
+ while (1) {
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char topLeft[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+ printf("%s%s", clr, topLeft);
+
+ apply_profile(i);
+ printf("\n==> Profile: %s\n\n", profiles[i].name);
+
+ sleep(1);
+ rte_service_dump(stdout, UINT32_MAX);
+
+ sleep(5);
+ rte_service_dump(stdout, UINT32_MAX);
+
+ i++;
+ if (i >= NUM_PROFILES)
+ i = 0;
+ }
+
+ return 0;
+}
Code Review / deb_dpdk.git / blobdiff