-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2010-2018 Intel Corporation
*/
#ifndef _RTE_EAL_H_
#include <stdint.h>
#include <sched.h>
+#include <time.h>
+#include <rte_config.h>
+#include <rte_compat.h>
#include <rte_per_lcore.h>
#include <rte_bus.h>
*/
int rte_eal_init(int argc, char **argv);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Clean up the Environment Abstraction Layer (EAL)
+ *
+ * This function must be called to release any internal resources that EAL has
+ * allocated during rte_eal_init(). After this call, no DPDK function calls may
+ * be made. It is expected that common usage of this function is to call it
+ * just before terminating the process.
+ *
+ * @return 0 Successfully released all internal EAL resources
+ * @return -EFAULT There was an error in releasing all resources.
+ */
+int __rte_experimental rte_eal_cleanup(void);
+
/**
* Check if a primary process is currently alive
*
*/
int rte_eal_primary_proc_alive(const char *config_file_path);
+#define RTE_MP_MAX_FD_NUM 8 /* The max amount of fds */
+#define RTE_MP_MAX_NAME_LEN 64 /* The max length of action name */
+#define RTE_MP_MAX_PARAM_LEN 256 /* The max length of param */
+struct rte_mp_msg {
+ char name[RTE_MP_MAX_NAME_LEN];
+ int len_param;
+ int num_fds;
+ uint8_t param[RTE_MP_MAX_PARAM_LEN];
+ int fds[RTE_MP_MAX_FD_NUM];
+};
+
+struct rte_mp_reply {
+ int nb_sent;
+ int nb_received;
+ struct rte_mp_msg *msgs; /* caller to free */
+};
+
+/**
+ * Action function typedef used by other components.
+ *
+ * As we create socket channel for primary/secondary communication, use
+ * this function typedef to register action for coming messages.
+ */
+typedef int (*rte_mp_t)(const struct rte_mp_msg *msg, const void *peer);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Register an action function for primary/secondary communication.
+ *
+ * Call this function to register an action, if the calling component wants
+ * to response the messages from the corresponding component in its primary
+ * process or secondary processes.
+ *
+ * @param name
+ * The name argument plays as the nonredundant key to find the action.
+ *
+ * @param action
+ * The action argument is the function pointer to the action function.
+ *
+ * @return
+ * - 0 on success.
+ * - (<0) on failure.
+ */
+int __rte_experimental
+rte_mp_action_register(const char *name, rte_mp_t action);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Unregister an action function for primary/secondary communication.
+ *
+ * Call this function to unregister an action if the calling component does
+ * not want to response the messages from the corresponding component in its
+ * primary process or secondary processes.
+ *
+ * @param name
+ * The name argument plays as the nonredundant key to find the action.
+ *
+ */
+void __rte_experimental
+rte_mp_action_unregister(const char *name);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Send a message to the peer process.
+ *
+ * This function will send a message which will be responsed by the action
+ * identified by name in the peer process.
+ *
+ * @param msg
+ * The msg argument contains the customized message.
+ *
+ * @return
+ * - On success, return 0.
+ * - On failure, return -1, and the reason will be stored in rte_errno.
+ */
+int __rte_experimental
+rte_mp_sendmsg(struct rte_mp_msg *msg);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Send a request to the peer process and expect a reply.
+ *
+ * This function sends a request message to the peer process, and will
+ * block until receiving reply message from the peer process.
+ *
+ * @note The caller is responsible to free reply->replies.
+ *
+ * @param req
+ * The req argument contains the customized request message.
+ *
+ * @param reply
+ * The reply argument will be for storing all the replied messages;
+ * the caller is responsible for free reply->replies.
+ *
+ * @param ts
+ * The ts argument specifies how long we can wait for the peer(s) to reply.
+ *
+ * @return
+ * - On success, return 0.
+ * - On failure, return -1, and the reason will be stored in rte_errno.
+ */
+int __rte_experimental
+rte_mp_request(struct rte_mp_msg *req, struct rte_mp_reply *reply,
+ const struct timespec *ts);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Send a reply to the peer process.
+ *
+ * This function will send a reply message in response to a request message
+ * received previously.
+ *
+ * @param msg
+ * The msg argument contains the customized message.
+ *
+ * @param peer
+ * The peer argument is the pointer to the peer socket path.
+ *
+ * @return
+ * - On success, return 0.
+ * - On failure, return -1, and the reason will be stored in rte_errno.
+ */
+int __rte_experimental
+rte_mp_reply(struct rte_mp_msg *msg, const char *peer);
+
/**
* Usage function typedef used by the application usage function.
*
*/
enum rte_iova_mode rte_eal_iova_mode(void);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Get user provided pool ops name for mbuf
+ *
+ * @return
+ * returns user provided pool ops name.
+ */
+const char * __rte_experimental
+rte_eal_mbuf_user_pool_ops(void);
+
/**
* Get default pool ops name for mbuf
*
Code Review / deb_dpdk.git / blobdiff