--- /dev/null
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETHDEV_H_
+#define _RTE_ETHDEV_H_
+
+/**
+ * @file
+ *
+ * RTE Ethernet Device API
+ *
+ * The Ethernet Device API is composed of two parts:
+ *
+ * - The application-oriented Ethernet API that includes functions to setup
+ * an Ethernet device (configure it, setup its RX and TX queues and start it),
+ * to get its MAC address, the speed and the status of its physical link,
+ * to receive and to transmit packets, and so on.
+ *
+ * - The driver-oriented Ethernet API that exports a function allowing
+ * an Ethernet Poll Mode Driver (PMD) to simultaneously register itself as
+ * an Ethernet device driver and as a PCI driver for a set of matching PCI
+ * [Ethernet] devices classes.
+ *
+ * By default, all the functions of the Ethernet Device API exported by a PMD
+ * are lock-free functions which assume to not be invoked in parallel on
+ * different logical cores to work on the same target object. For instance,
+ * the receive function of a PMD cannot be invoked in parallel on two logical
+ * cores to poll the same RX queue [of the same port]. Of course, this function
+ * can be invoked in parallel by different logical cores on different RX queues.
+ * It is the responsibility of the upper level application to enforce this rule.
+ *
+ * If needed, parallel accesses by multiple logical cores to shared queues
+ * shall be explicitly protected by dedicated inline lock-aware functions
+ * built on top of their corresponding lock-free functions of the PMD API.
+ *
+ * In all functions of the Ethernet API, the Ethernet device is
+ * designated by an integer >= 0 named the device port identifier.
+ *
+ * At the Ethernet driver level, Ethernet devices are represented by a generic
+ * data structure of type *rte_eth_dev*.
+ *
+ * Ethernet devices are dynamically registered during the PCI probing phase
+ * performed at EAL initialization time.
+ * When an Ethernet device is being probed, an *rte_eth_dev* structure and
+ * a new port identifier are allocated for that device. Then, the eth_dev_init()
+ * function supplied by the Ethernet driver matching the probed PCI
+ * device is invoked to properly initialize the device.
+ *
+ * The role of the device init function consists of resetting the hardware,
+ * checking access to Non-volatile Memory (NVM), reading the MAC address
+ * from NVM etc.
+ *
+ * If the device init operation is successful, the correspondence between
+ * the port identifier assigned to the new device and its associated
+ * *rte_eth_dev* structure is effectively registered.
+ * Otherwise, both the *rte_eth_dev* structure and the port identifier are
+ * freed.
+ *
+ * The functions exported by the application Ethernet API to setup a device
+ * designated by its port identifier must be invoked in the following order:
+ * - rte_eth_dev_configure()
+ * - rte_eth_tx_queue_setup()
+ * - rte_eth_rx_queue_setup()
+ * - rte_eth_dev_start()
+ *
+ * Then, the network application can invoke, in any order, the functions
+ * exported by the Ethernet API to get the MAC address of a given device, to
+ * get the speed and the status of a device physical link, to receive/transmit
+ * [burst of] packets, and so on.
+ *
+ * If the application wants to change the configuration (i.e. call
+ * rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or
+ * rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the
+ * device and then do the reconfiguration before calling rte_eth_dev_start()
+ * again. The tramsit and receive functions should not be invoked when the
+ * device is stopped.
+ *
+ * Please note that some configuration is not stored between calls to
+ * rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will
+ * be retained:
+ *
+ * - flow control settings
+ * - receive mode configuration (promiscuous mode, hardware checksum mode,
+ * RSS/VMDQ settings etc.)
+ * - VLAN filtering configuration
+ * - MAC addresses supplied to MAC address array
+ * - flow director filtering mode (but not filtering rules)
+ * - NIC queue statistics mappings
+ *
+ * Any other configuration will not be stored and will need to be re-entered
+ * after a call to rte_eth_dev_start().
+ *
+ * Finally, a network application can close an Ethernet device by invoking the
+ * rte_eth_dev_close() function.
+ *
+ * Each function of the application Ethernet API invokes a specific function
+ * of the PMD that controls the target device designated by its port
+ * identifier.
+ * For this purpose, all device-specific functions of an Ethernet driver are
+ * supplied through a set of pointers contained in a generic structure of type
+ * *eth_dev_ops*.
+ * The address of the *eth_dev_ops* structure is stored in the *rte_eth_dev*
+ * structure by the device init function of the Ethernet driver, which is
+ * invoked during the PCI probing phase, as explained earlier.
+ *
+ * In other words, each function of the Ethernet API simply retrieves the
+ * *rte_eth_dev* structure associated with the device port identifier and
+ * performs an indirect invocation of the corresponding driver function
+ * supplied in the *eth_dev_ops* structure of the *rte_eth_dev* structure.
+ *
+ * For performance reasons, the address of the burst-oriented RX and TX
+ * functions of the Ethernet driver are not contained in the *eth_dev_ops*
+ * structure. Instead, they are directly stored at the beginning of the
+ * *rte_eth_dev* structure to avoid an extra indirect memory access during
+ * their invocation.
+ *
+ * RTE ethernet device drivers do not use interrupts for transmitting or
+ * receiving. Instead, Ethernet drivers export Poll-Mode receive and transmit
+ * functions to applications.
+ * Both receive and transmit functions are packet-burst oriented to minimize
+ * their cost per packet through the following optimizations:
+ *
+ * - Sharing among multiple packets the incompressible cost of the
+ * invocation of receive/transmit functions.
+ *
+ * - Enabling receive/transmit functions to take advantage of burst-oriented
+ * hardware features (L1 cache, prefetch instructions, NIC head/tail
+ * registers) to minimize the number of CPU cycles per packet, for instance,
+ * by avoiding useless read memory accesses to ring descriptors, or by
+ * systematically using arrays of pointers that exactly fit L1 cache line
+ * boundaries and sizes.
+ *
+ * The burst-oriented receive function does not provide any error notification,
+ * to avoid the corresponding overhead. As a hint, the upper-level application
+ * might check the status of the device link once being systematically returned
+ * a 0 value by the receive function of the driver for a given number of tries.
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+
+#include <rte_dev.h>
+
+/* Use this macro to check if LRO API is supported */
+#define RTE_ETHDEV_HAS_LRO_SUPPORT
+
+#include <rte_log.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_dev.h>
+#include <rte_devargs.h>
+#include "rte_ether.h"
+#include "rte_eth_ctrl.h"
+#include "rte_dev_info.h"
+
+struct rte_mbuf;
+
+/**
+ * A structure used to retrieve statistics for an Ethernet port.
+ */
+struct rte_eth_stats {
+ uint64_t ipackets; /**< Total number of successfully received packets. */
+ uint64_t opackets; /**< Total number of successfully transmitted packets.*/
+ uint64_t ibytes; /**< Total number of successfully received bytes. */
+ uint64_t obytes; /**< Total number of successfully transmitted bytes. */
+ uint64_t imissed;
+ /**< Total of RX packets dropped by the HW,
+ * because there are no available mbufs (i.e. RX queues are full).
+ */
+ uint64_t ibadcrc __rte_deprecated;
+ /**< Deprecated; Total of RX packets with CRC error. */
+ uint64_t ibadlen __rte_deprecated;
+ /**< Deprecated; Total of RX packets with bad length. */
+ uint64_t ierrors; /**< Total number of erroneous received packets. */
+ uint64_t oerrors; /**< Total number of failed transmitted packets. */
+ uint64_t imcasts;
+ /**< Deprecated; Total number of multicast received packets. */
+ uint64_t rx_nombuf; /**< Total number of RX mbuf allocation failures. */
+ uint64_t fdirmatch __rte_deprecated;
+ /**< Deprecated; Total number of RX packets matching a filter. */
+ uint64_t fdirmiss __rte_deprecated;
+ /**< Deprecated; Total number of RX packets not matching any filter. */
+ uint64_t tx_pause_xon __rte_deprecated;
+ /**< Deprecated; Total nb. of XON pause frame sent. */
+ uint64_t rx_pause_xon __rte_deprecated;
+ /**< Deprecated; Total nb. of XON pause frame received. */
+ uint64_t tx_pause_xoff __rte_deprecated;
+ /**< Deprecated; Total nb. of XOFF pause frame sent. */
+ uint64_t rx_pause_xoff __rte_deprecated;
+ /**< Deprecated; Total nb. of XOFF pause frame received. */
+ uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of queue RX packets. */
+ uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of queue TX packets. */
+ uint64_t q_ibytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of successfully received queue bytes. */
+ uint64_t q_obytes[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of successfully transmitted queue bytes. */
+ uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS];
+ /**< Total number of queue packets received that are dropped. */
+ uint64_t ilbpackets;
+ /**< Total number of good packets received from loopback,VF Only */
+ uint64_t olbpackets;
+ /**< Total number of good packets transmitted to loopback,VF Only */
+ uint64_t ilbbytes;
+ /**< Total number of good bytes received from loopback,VF Only */
+ uint64_t olbbytes;
+ /**< Total number of good bytes transmitted to loopback,VF Only */
+};
+
+/**
+ * Device supported speeds bitmap flags
+ */
+#define ETH_LINK_SPEED_AUTONEG (0 << 0) /**< Autonegotiate (all speeds) */
+#define ETH_LINK_SPEED_FIXED (1 << 0) /**< Disable autoneg (fixed speed) */
+#define ETH_LINK_SPEED_10M_HD (1 << 1) /**< 10 Mbps half-duplex */
+#define ETH_LINK_SPEED_10M (1 << 2) /**< 10 Mbps full-duplex */
+#define ETH_LINK_SPEED_100M_HD (1 << 3) /**< 100 Mbps half-duplex */
+#define ETH_LINK_SPEED_100M (1 << 4) /**< 100 Mbps full-duplex */
+#define ETH_LINK_SPEED_1G (1 << 5) /**< 1 Gbps */
+#define ETH_LINK_SPEED_2_5G (1 << 6) /**< 2.5 Gbps */
+#define ETH_LINK_SPEED_5G (1 << 7) /**< 5 Gbps */
+#define ETH_LINK_SPEED_10G (1 << 8) /**< 10 Gbps */
+#define ETH_LINK_SPEED_20G (1 << 9) /**< 20 Gbps */
+#define ETH_LINK_SPEED_25G (1 << 10) /**< 25 Gbps */
+#define ETH_LINK_SPEED_40G (1 << 11) /**< 40 Gbps */
+#define ETH_LINK_SPEED_50G (1 << 12) /**< 50 Gbps */
+#define ETH_LINK_SPEED_56G (1 << 13) /**< 56 Gbps */
+#define ETH_LINK_SPEED_100G (1 << 14) /**< 100 Gbps */
+
+/**
+ * Ethernet numeric link speeds in Mbps
+ */
+#define ETH_SPEED_NUM_NONE 0 /**< Not defined */
+#define ETH_SPEED_NUM_10M 10 /**< 10 Mbps */
+#define ETH_SPEED_NUM_100M 100 /**< 100 Mbps */
+#define ETH_SPEED_NUM_1G 1000 /**< 1 Gbps */
+#define ETH_SPEED_NUM_2_5G 2500 /**< 2.5 Gbps */
+#define ETH_SPEED_NUM_5G 5000 /**< 5 Gbps */
+#define ETH_SPEED_NUM_10G 10000 /**< 10 Gbps */
+#define ETH_SPEED_NUM_20G 20000 /**< 20 Gbps */
+#define ETH_SPEED_NUM_25G 25000 /**< 25 Gbps */
+#define ETH_SPEED_NUM_40G 40000 /**< 40 Gbps */
+#define ETH_SPEED_NUM_50G 50000 /**< 50 Gbps */
+#define ETH_SPEED_NUM_56G 56000 /**< 56 Gbps */
+#define ETH_SPEED_NUM_100G 100000 /**< 100 Gbps */
+
+/**
+ * A structure used to retrieve link-level information of an Ethernet port.
+ */
+struct rte_eth_link {
+ uint32_t link_speed; /**< ETH_SPEED_NUM_ */
+ uint16_t link_duplex : 1; /**< ETH_LINK_[HALF/FULL]_DUPLEX */
+ uint16_t link_autoneg : 1; /**< ETH_LINK_SPEED_[AUTONEG/FIXED] */
+ uint16_t link_status : 1; /**< ETH_LINK_[DOWN/UP] */
+} __attribute__((aligned(8))); /**< aligned for atomic64 read/write */
+
+/* Utility constants */
+#define ETH_LINK_HALF_DUPLEX 0 /**< Half-duplex connection. */
+#define ETH_LINK_FULL_DUPLEX 1 /**< Full-duplex connection. */
+#define ETH_LINK_DOWN 0 /**< Link is down. */
+#define ETH_LINK_UP 1 /**< Link is up. */
+#define ETH_LINK_FIXED 0 /**< No autonegotiation. */
+#define ETH_LINK_AUTONEG 1 /**< Autonegotiated. */
+
+/**
+ * A structure used to configure the ring threshold registers of an RX/TX
+ * queue for an Ethernet port.
+ */
+struct rte_eth_thresh {
+ uint8_t pthresh; /**< Ring prefetch threshold. */
+ uint8_t hthresh; /**< Ring host threshold. */
+ uint8_t wthresh; /**< Ring writeback threshold. */
+};
+
+/**
+ * Simple flags are used for rte_eth_conf.rxmode.mq_mode.
+ */
+#define ETH_MQ_RX_RSS_FLAG 0x1
+#define ETH_MQ_RX_DCB_FLAG 0x2
+#define ETH_MQ_RX_VMDQ_FLAG 0x4
+
+/**
+ * A set of values to identify what method is to be used to route
+ * packets to multiple queues.
+ */
+enum rte_eth_rx_mq_mode {
+ /** None of DCB,RSS or VMDQ mode */
+ ETH_MQ_RX_NONE = 0,
+
+ /** For RX side, only RSS is on */
+ ETH_MQ_RX_RSS = ETH_MQ_RX_RSS_FLAG,
+ /** For RX side,only DCB is on. */
+ ETH_MQ_RX_DCB = ETH_MQ_RX_DCB_FLAG,
+ /** Both DCB and RSS enable */
+ ETH_MQ_RX_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG,
+
+ /** Only VMDQ, no RSS nor DCB */
+ ETH_MQ_RX_VMDQ_ONLY = ETH_MQ_RX_VMDQ_FLAG,
+ /** RSS mode with VMDQ */
+ ETH_MQ_RX_VMDQ_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_VMDQ_FLAG,
+ /** Use VMDQ+DCB to route traffic to queues */
+ ETH_MQ_RX_VMDQ_DCB = ETH_MQ_RX_VMDQ_FLAG | ETH_MQ_RX_DCB_FLAG,
+ /** Enable both VMDQ and DCB in VMDq */
+ ETH_MQ_RX_VMDQ_DCB_RSS = ETH_MQ_RX_RSS_FLAG | ETH_MQ_RX_DCB_FLAG |
+ ETH_MQ_RX_VMDQ_FLAG,
+};
+
+/**
+ * for rx mq mode backward compatible
+ */
+#define ETH_RSS ETH_MQ_RX_RSS
+#define VMDQ_DCB ETH_MQ_RX_VMDQ_DCB
+#define ETH_DCB_RX ETH_MQ_RX_DCB
+
+/**
+ * A set of values to identify what method is to be used to transmit
+ * packets using multi-TCs.
+ */
+enum rte_eth_tx_mq_mode {
+ ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */
+ ETH_MQ_TX_DCB, /**< For TX side,only DCB is on. */
+ ETH_MQ_TX_VMDQ_DCB, /**< For TX side,both DCB and VT is on. */
+ ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */
+};
+
+/**
+ * for tx mq mode backward compatible
+ */
+#define ETH_DCB_NONE ETH_MQ_TX_NONE
+#define ETH_VMDQ_DCB_TX ETH_MQ_TX_VMDQ_DCB
+#define ETH_DCB_TX ETH_MQ_TX_DCB
+
+/**
+ * A structure used to configure the RX features of an Ethernet port.
+ */
+struct rte_eth_rxmode {
+ /** The multi-queue packet distribution mode to be used, e.g. RSS. */
+ enum rte_eth_rx_mq_mode mq_mode;
+ uint32_t max_rx_pkt_len; /**< Only used if jumbo_frame enabled. */
+ uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
+ uint16_t header_split : 1, /**< Header Split enable. */
+ hw_ip_checksum : 1, /**< IP/UDP/TCP checksum offload enable. */
+ hw_vlan_filter : 1, /**< VLAN filter enable. */
+ hw_vlan_strip : 1, /**< VLAN strip enable. */
+ hw_vlan_extend : 1, /**< Extended VLAN enable. */
+ jumbo_frame : 1, /**< Jumbo Frame Receipt enable. */
+ hw_strip_crc : 1, /**< Enable CRC stripping by hardware. */
+ enable_scatter : 1, /**< Enable scatter packets rx handler */
+ enable_lro : 1; /**< Enable LRO */
+};
+
+/**
+ * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN.
+ * Note that single VLAN is treated the same as inner VLAN.
+ */
+enum rte_vlan_type {
+ ETH_VLAN_TYPE_UNKNOWN = 0,
+ ETH_VLAN_TYPE_INNER, /**< Single VLAN, or inner VLAN. */
+ ETH_VLAN_TYPE_OUTER, /**< Outer VLAN. */
+ ETH_VLAN_TYPE_MAX,
+};
+
+/**
+ * A structure used to configure the Receive Side Scaling (RSS) feature
+ * of an Ethernet port.
+ * If not NULL, the *rss_key* pointer of the *rss_conf* structure points
+ * to an array holding the RSS key to use for hashing specific header
+ * fields of received packets. The length of this array should be indicated
+ * by *rss_key_len* below. Otherwise, a default random hash key is used by
+ * the device driver.
+ *
+ * The *rss_key_len* field of the *rss_conf* structure indicates the length
+ * in bytes of the array pointed by *rss_key*. To be compatible, this length
+ * will be checked in i40e only. Others assume 40 bytes to be used as before.
+ *
+ * The *rss_hf* field of the *rss_conf* structure indicates the different
+ * types of IPv4/IPv6 packets to which the RSS hashing must be applied.
+ * Supplying an *rss_hf* equal to zero disables the RSS feature.
+ */
+struct rte_eth_rss_conf {
+ uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */
+ uint8_t rss_key_len; /**< hash key length in bytes. */
+ uint64_t rss_hf; /**< Hash functions to apply - see below. */
+};
+
+/*
+ * The RSS offload types are defined based on flow types which are defined
+ * in rte_eth_ctrl.h. Different NIC hardwares may support different RSS offload
+ * types. The supported flow types or RSS offload types can be queried by
+ * rte_eth_dev_info_get().
+ */
+#define ETH_RSS_IPV4 (1ULL << RTE_ETH_FLOW_IPV4)
+#define ETH_RSS_FRAG_IPV4 (1ULL << RTE_ETH_FLOW_FRAG_IPV4)
+#define ETH_RSS_NONFRAG_IPV4_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_TCP)
+#define ETH_RSS_NONFRAG_IPV4_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_UDP)
+#define ETH_RSS_NONFRAG_IPV4_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_SCTP)
+#define ETH_RSS_NONFRAG_IPV4_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV4_OTHER)
+#define ETH_RSS_IPV6 (1ULL << RTE_ETH_FLOW_IPV6)
+#define ETH_RSS_FRAG_IPV6 (1ULL << RTE_ETH_FLOW_FRAG_IPV6)
+#define ETH_RSS_NONFRAG_IPV6_TCP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_TCP)
+#define ETH_RSS_NONFRAG_IPV6_UDP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_UDP)
+#define ETH_RSS_NONFRAG_IPV6_SCTP (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_SCTP)
+#define ETH_RSS_NONFRAG_IPV6_OTHER (1ULL << RTE_ETH_FLOW_NONFRAG_IPV6_OTHER)
+#define ETH_RSS_L2_PAYLOAD (1ULL << RTE_ETH_FLOW_L2_PAYLOAD)
+#define ETH_RSS_IPV6_EX (1ULL << RTE_ETH_FLOW_IPV6_EX)
+#define ETH_RSS_IPV6_TCP_EX (1ULL << RTE_ETH_FLOW_IPV6_TCP_EX)
+#define ETH_RSS_IPV6_UDP_EX (1ULL << RTE_ETH_FLOW_IPV6_UDP_EX)
+
+#define ETH_RSS_IP ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_OTHER | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_FRAG_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_OTHER | \
+ ETH_RSS_IPV6_EX)
+
+#define ETH_RSS_UDP ( \
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_NONFRAG_IPV6_UDP | \
+ ETH_RSS_IPV6_UDP_EX)
+
+#define ETH_RSS_TCP ( \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_IPV6_TCP_EX)
+
+#define ETH_RSS_SCTP ( \
+ ETH_RSS_NONFRAG_IPV4_SCTP | \
+ ETH_RSS_NONFRAG_IPV6_SCTP)
+
+/**< Mask of valid RSS hash protocols */
+#define ETH_RSS_PROTO_MASK ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_FRAG_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_NONFRAG_IPV4_SCTP | \
+ ETH_RSS_NONFRAG_IPV4_OTHER | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_FRAG_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_NONFRAG_IPV6_UDP | \
+ ETH_RSS_NONFRAG_IPV6_SCTP | \
+ ETH_RSS_NONFRAG_IPV6_OTHER | \
+ ETH_RSS_L2_PAYLOAD | \
+ ETH_RSS_IPV6_EX | \
+ ETH_RSS_IPV6_TCP_EX | \
+ ETH_RSS_IPV6_UDP_EX)
+
+/*
+ * Definitions used for redirection table entry size.
+ * Some RSS RETA sizes may not be supported by some drivers, check the
+ * documentation or the description of relevant functions for more details.
+ */
+#define ETH_RSS_RETA_SIZE_64 64
+#define ETH_RSS_RETA_SIZE_128 128
+#define ETH_RSS_RETA_SIZE_512 512
+#define RTE_RETA_GROUP_SIZE 64
+
+/* Definitions used for VMDQ and DCB functionality */
+#define ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDQ vlan filters. */
+#define ETH_DCB_NUM_USER_PRIORITIES 8 /**< Maximum nb. of DCB priorities. */
+#define ETH_VMDQ_DCB_NUM_QUEUES 128 /**< Maximum nb. of VMDQ DCB queues. */
+#define ETH_DCB_NUM_QUEUES 128 /**< Maximum nb. of DCB queues. */
+
+/* DCB capability defines */
+#define ETH_DCB_PG_SUPPORT 0x00000001 /**< Priority Group(ETS) support. */
+#define ETH_DCB_PFC_SUPPORT 0x00000002 /**< Priority Flow Control support. */
+
+/* Definitions used for VLAN Offload functionality */
+#define ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */
+#define ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */
+#define ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */
+
+/* Definitions used for mask VLAN setting */
+#define ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */
+#define ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/
+#define ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/
+#define ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/
+
+/* Definitions used for receive MAC address */
+#define ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */
+
+/* Definitions used for unicast hash */
+#define ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */
+
+/* Definitions used for VMDQ pool rx mode setting */
+#define ETH_VMDQ_ACCEPT_UNTAG 0x0001 /**< accept untagged packets. */
+#define ETH_VMDQ_ACCEPT_HASH_MC 0x0002 /**< accept packets in multicast table . */
+#define ETH_VMDQ_ACCEPT_HASH_UC 0x0004 /**< accept packets in unicast table. */
+#define ETH_VMDQ_ACCEPT_BROADCAST 0x0008 /**< accept broadcast packets. */
+#define ETH_VMDQ_ACCEPT_MULTICAST 0x0010 /**< multicast promiscuous. */
+
+/** Maximum nb. of vlan per mirror rule */
+#define ETH_MIRROR_MAX_VLANS 64
+
+#define ETH_MIRROR_VIRTUAL_POOL_UP 0x01 /**< Virtual Pool uplink Mirroring. */
+#define ETH_MIRROR_UPLINK_PORT 0x02 /**< Uplink Port Mirroring. */
+#define ETH_MIRROR_DOWNLINK_PORT 0x04 /**< Downlink Port Mirroring. */
+#define ETH_MIRROR_VLAN 0x08 /**< VLAN Mirroring. */
+#define ETH_MIRROR_VIRTUAL_POOL_DOWN 0x10 /**< Virtual Pool downlink Mirroring. */
+
+/**
+ * A structure used to configure VLAN traffic mirror of an Ethernet port.
+ */
+struct rte_eth_vlan_mirror {
+ uint64_t vlan_mask; /**< mask for valid VLAN ID. */
+ /** VLAN ID list for vlan mirroring. */
+ uint16_t vlan_id[ETH_MIRROR_MAX_VLANS];
+};
+
+/**
+ * A structure used to configure traffic mirror of an Ethernet port.
+ */
+struct rte_eth_mirror_conf {
+ uint8_t rule_type; /**< Mirroring rule type */
+ uint8_t dst_pool; /**< Destination pool for this mirror rule. */
+ uint64_t pool_mask; /**< Bitmap of pool for pool mirroring */
+ /** VLAN ID setting for VLAN mirroring. */
+ struct rte_eth_vlan_mirror vlan;
+};
+
+/**
+ * A structure used to configure 64 entries of Redirection Table of the
+ * Receive Side Scaling (RSS) feature of an Ethernet port. To configure
+ * more than 64 entries supported by hardware, an array of this structure
+ * is needed.
+ */
+struct rte_eth_rss_reta_entry64 {
+ uint64_t mask;
+ /**< Mask bits indicate which entries need to be updated/queried. */
+ uint16_t reta[RTE_RETA_GROUP_SIZE];
+ /**< Group of 64 redirection table entries. */
+};
+
+/**
+ * This enum indicates the possible number of traffic classes
+ * in DCB configratioins
+ */
+enum rte_eth_nb_tcs {
+ ETH_4_TCS = 4, /**< 4 TCs with DCB. */
+ ETH_8_TCS = 8 /**< 8 TCs with DCB. */
+};
+
+/**
+ * This enum indicates the possible number of queue pools
+ * in VMDQ configurations.
+ */
+enum rte_eth_nb_pools {
+ ETH_8_POOLS = 8, /**< 8 VMDq pools. */
+ ETH_16_POOLS = 16, /**< 16 VMDq pools. */
+ ETH_32_POOLS = 32, /**< 32 VMDq pools. */
+ ETH_64_POOLS = 64 /**< 64 VMDq pools. */
+};
+
+/* This structure may be extended in future. */
+struct rte_eth_dcb_rx_conf {
+ enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */
+ /** Traffic class each UP mapped to. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_vmdq_dcb_tx_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */
+ /** Traffic class each UP mapped to. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_dcb_tx_conf {
+ enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */
+ /** Traffic class each UP mapped to. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+};
+
+struct rte_eth_vmdq_tx_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< VMDq mode, 64 pools. */
+};
+
+/**
+ * A structure used to configure the VMDQ+DCB feature
+ * of an Ethernet port.
+ *
+ * Using this feature, packets are routed to a pool of queues, based
+ * on the vlan id in the vlan tag, and then to a specific queue within
+ * that pool, using the user priority vlan tag field.
+ *
+ * A default pool may be used, if desired, to route all traffic which
+ * does not match the vlan filter rules.
+ */
+struct rte_eth_vmdq_dcb_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools */
+ uint8_t enable_default_pool; /**< If non-zero, use a default pool */
+ uint8_t default_pool; /**< The default pool, if applicable */
+ uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
+ struct {
+ uint16_t vlan_id; /**< The vlan id of the received frame */
+ uint64_t pools; /**< Bitmask of pools for packet rx */
+ } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
+ uint8_t dcb_tc[ETH_DCB_NUM_USER_PRIORITIES];
+ /**< Selects a queue in a pool */
+};
+
+struct rte_eth_vmdq_rx_conf {
+ enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */
+ uint8_t enable_default_pool; /**< If non-zero, use a default pool */
+ uint8_t default_pool; /**< The default pool, if applicable */
+ uint8_t enable_loop_back; /**< Enable VT loop back */
+ uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */
+ uint32_t rx_mode; /**< Flags from ETH_VMDQ_ACCEPT_* */
+ struct {
+ uint16_t vlan_id; /**< The vlan id of the received frame */
+ uint64_t pools; /**< Bitmask of pools for packet rx */
+ } pool_map[ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq vlan pool maps. */
+};
+
+/**
+ * A structure used to configure the TX features of an Ethernet port.
+ */
+struct rte_eth_txmode {
+ enum rte_eth_tx_mq_mode mq_mode; /**< TX multi-queues mode. */
+
+ /* For i40e specifically */
+ uint16_t pvid;
+ uint8_t hw_vlan_reject_tagged : 1,
+ /**< If set, reject sending out tagged pkts */
+ hw_vlan_reject_untagged : 1,
+ /**< If set, reject sending out untagged pkts */
+ hw_vlan_insert_pvid : 1;
+ /**< If set, enable port based VLAN insertion */
+};
+
+/**
+ * A structure used to configure an RX ring of an Ethernet port.
+ */
+struct rte_eth_rxconf {
+ struct rte_eth_thresh rx_thresh; /**< RX ring threshold registers. */
+ uint16_t rx_free_thresh; /**< Drives the freeing of RX descriptors. */
+ uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */
+ uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+};
+
+#define ETH_TXQ_FLAGS_NOMULTSEGS 0x0001 /**< nb_segs=1 for all mbufs */
+#define ETH_TXQ_FLAGS_NOREFCOUNT 0x0002 /**< refcnt can be ignored */
+#define ETH_TXQ_FLAGS_NOMULTMEMP 0x0004 /**< all bufs come from same mempool */
+#define ETH_TXQ_FLAGS_NOVLANOFFL 0x0100 /**< disable VLAN offload */
+#define ETH_TXQ_FLAGS_NOXSUMSCTP 0x0200 /**< disable SCTP checksum offload */
+#define ETH_TXQ_FLAGS_NOXSUMUDP 0x0400 /**< disable UDP checksum offload */
+#define ETH_TXQ_FLAGS_NOXSUMTCP 0x0800 /**< disable TCP checksum offload */
+#define ETH_TXQ_FLAGS_NOOFFLOADS \
+ (ETH_TXQ_FLAGS_NOVLANOFFL | ETH_TXQ_FLAGS_NOXSUMSCTP | \
+ ETH_TXQ_FLAGS_NOXSUMUDP | ETH_TXQ_FLAGS_NOXSUMTCP)
+#define ETH_TXQ_FLAGS_NOXSUMS \
+ (ETH_TXQ_FLAGS_NOXSUMSCTP | ETH_TXQ_FLAGS_NOXSUMUDP | \
+ ETH_TXQ_FLAGS_NOXSUMTCP)
+/**
+ * A structure used to configure a TX ring of an Ethernet port.
+ */
+struct rte_eth_txconf {
+ struct rte_eth_thresh tx_thresh; /**< TX ring threshold registers. */
+ uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */
+ uint16_t tx_free_thresh; /**< Start freeing TX buffers if there are
+ less free descriptors than this value. */
+
+ uint32_t txq_flags; /**< Set flags for the Tx queue */
+ uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */
+};
+
+/**
+ * A structure contains information about HW descriptor ring limitations.
+ */
+struct rte_eth_desc_lim {
+ uint16_t nb_max; /**< Max allowed number of descriptors. */
+ uint16_t nb_min; /**< Min allowed number of descriptors. */
+ uint16_t nb_align; /**< Number of descriptors should be aligned to. */
+};
+
+/**
+ * This enum indicates the flow control mode
+ */
+enum rte_eth_fc_mode {
+ RTE_FC_NONE = 0, /**< Disable flow control. */
+ RTE_FC_RX_PAUSE, /**< RX pause frame, enable flowctrl on TX side. */
+ RTE_FC_TX_PAUSE, /**< TX pause frame, enable flowctrl on RX side. */
+ RTE_FC_FULL /**< Enable flow control on both side. */
+};
+
+/**
+ * A structure used to configure Ethernet flow control parameter.
+ * These parameters will be configured into the register of the NIC.
+ * Please refer to the corresponding data sheet for proper value.
+ */
+struct rte_eth_fc_conf {
+ uint32_t high_water; /**< High threshold value to trigger XOFF */
+ uint32_t low_water; /**< Low threshold value to trigger XON */
+ uint16_t pause_time; /**< Pause quota in the Pause frame */
+ uint16_t send_xon; /**< Is XON frame need be sent */
+ enum rte_eth_fc_mode mode; /**< Link flow control mode */
+ uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */
+ uint8_t autoneg; /**< Use Pause autoneg */
+};
+
+/**
+ * A structure used to configure Ethernet priority flow control parameter.
+ * These parameters will be configured into the register of the NIC.
+ * Please refer to the corresponding data sheet for proper value.
+ */
+struct rte_eth_pfc_conf {
+ struct rte_eth_fc_conf fc; /**< General flow control parameter. */
+ uint8_t priority; /**< VLAN User Priority. */
+};
+
+/**
+ * Memory space that can be configured to store Flow Director filters
+ * in the board memory.
+ */
+enum rte_fdir_pballoc_type {
+ RTE_FDIR_PBALLOC_64K = 0, /**< 64k. */
+ RTE_FDIR_PBALLOC_128K, /**< 128k. */
+ RTE_FDIR_PBALLOC_256K, /**< 256k. */
+};
+
+/**
+ * Select report mode of FDIR hash information in RX descriptors.
+ */
+enum rte_fdir_status_mode {
+ RTE_FDIR_NO_REPORT_STATUS = 0, /**< Never report FDIR hash. */
+ RTE_FDIR_REPORT_STATUS, /**< Only report FDIR hash for matching pkts. */
+ RTE_FDIR_REPORT_STATUS_ALWAYS, /**< Always report FDIR hash. */
+};
+
+/**
+ * A structure used to configure the Flow Director (FDIR) feature
+ * of an Ethernet port.
+ *
+ * If mode is RTE_FDIR_DISABLE, the pballoc value is ignored.
+ */
+struct rte_fdir_conf {
+ enum rte_fdir_mode mode; /**< Flow Director mode. */
+ enum rte_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */
+ enum rte_fdir_status_mode status; /**< How to report FDIR hash. */
+ /** RX queue of packets matching a "drop" filter in perfect mode. */
+ uint8_t drop_queue;
+ struct rte_eth_fdir_masks mask;
+ struct rte_eth_fdir_flex_conf flex_conf;
+ /**< Flex payload configuration. */
+};
+
+/**
+ * UDP tunneling configuration.
+ * Used to config the UDP port for a type of tunnel.
+ * NICs need the UDP port to identify the tunnel type.
+ * Normally a type of tunnel has a default UDP port, this structure can be used
+ * in case if the users want to change or support more UDP port.
+ */
+struct rte_eth_udp_tunnel {
+ uint16_t udp_port; /**< UDP port used for the tunnel. */
+ uint8_t prot_type; /**< Tunnel type. Defined in rte_eth_tunnel_type. */
+};
+
+/**
+ * A structure used to enable/disable specific device interrupts.
+ */
+struct rte_intr_conf {
+ /** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */
+ uint16_t lsc;
+ /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */
+ uint16_t rxq;
+};
+
+/**
+ * A structure used to configure an Ethernet port.
+ * Depending upon the RX multi-queue mode, extra advanced
+ * configuration settings may be needed.
+ */
+struct rte_eth_conf {
+ uint32_t link_speeds; /**< bitmap of ETH_LINK_SPEED_XXX of speeds to be
+ used. ETH_LINK_SPEED_FIXED disables link
+ autonegotiation, and a unique speed shall be
+ set. Otherwise, the bitmap defines the set of
+ speeds to be advertised. If the special value
+ ETH_LINK_SPEED_AUTONEG (0) is used, all speeds
+ supported are advertised. */
+ struct rte_eth_rxmode rxmode; /**< Port RX configuration. */
+ struct rte_eth_txmode txmode; /**< Port TX configuration. */
+ uint32_t lpbk_mode; /**< Loopback operation mode. By default the value
+ is 0, meaning the loopback mode is disabled.
+ Read the datasheet of given ethernet controller
+ for details. The possible values of this field
+ are defined in implementation of each driver. */
+ struct {
+ struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */
+ struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf;
+ /**< Port vmdq+dcb configuration. */
+ struct rte_eth_dcb_rx_conf dcb_rx_conf;
+ /**< Port dcb RX configuration. */
+ struct rte_eth_vmdq_rx_conf vmdq_rx_conf;
+ /**< Port vmdq RX configuration. */
+ } rx_adv_conf; /**< Port RX filtering configuration (union). */
+ union {
+ struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf;
+ /**< Port vmdq+dcb TX configuration. */
+ struct rte_eth_dcb_tx_conf dcb_tx_conf;
+ /**< Port dcb TX configuration. */
+ struct rte_eth_vmdq_tx_conf vmdq_tx_conf;
+ /**< Port vmdq TX configuration. */
+ } tx_adv_conf; /**< Port TX DCB configuration (union). */
+ /** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC
+ is needed,and the variable must be set ETH_DCB_PFC_SUPPORT. */
+ uint32_t dcb_capability_en;
+ struct rte_fdir_conf fdir_conf; /**< FDIR configuration. */
+ struct rte_intr_conf intr_conf; /**< Interrupt mode configuration. */
+};
+
+/**
+ * A structure used to retrieve the contextual information of
+ * an Ethernet device, such as the controlling driver of the device,
+ * its PCI context, etc...
+ */
+
+/**
+ * RX offload capabilities of a device.
+ */
+#define DEV_RX_OFFLOAD_VLAN_STRIP 0x00000001
+#define DEV_RX_OFFLOAD_IPV4_CKSUM 0x00000002
+#define DEV_RX_OFFLOAD_UDP_CKSUM 0x00000004
+#define DEV_RX_OFFLOAD_TCP_CKSUM 0x00000008
+#define DEV_RX_OFFLOAD_TCP_LRO 0x00000010
+#define DEV_RX_OFFLOAD_QINQ_STRIP 0x00000020
+#define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000040
+
+/**
+ * TX offload capabilities of a device.
+ */
+#define DEV_TX_OFFLOAD_VLAN_INSERT 0x00000001
+#define DEV_TX_OFFLOAD_IPV4_CKSUM 0x00000002
+#define DEV_TX_OFFLOAD_UDP_CKSUM 0x00000004
+#define DEV_TX_OFFLOAD_TCP_CKSUM 0x00000008
+#define DEV_TX_OFFLOAD_SCTP_CKSUM 0x00000010
+#define DEV_TX_OFFLOAD_TCP_TSO 0x00000020
+#define DEV_TX_OFFLOAD_UDP_TSO 0x00000040
+#define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM 0x00000080 /**< Used for tunneling packet. */
+#define DEV_TX_OFFLOAD_QINQ_INSERT 0x00000100
+
+/**
+ * Ethernet device information
+ */
+struct rte_eth_dev_info {
+ struct rte_pci_device *pci_dev; /**< Device PCI information. */
+ const char *driver_name; /**< Device Driver name. */
+ unsigned int if_index; /**< Index to bound host interface, or 0 if none.
+ Use if_indextoname() to translate into an interface name. */
+ uint32_t min_rx_bufsize; /**< Minimum size of RX buffer. */
+ uint32_t max_rx_pktlen; /**< Maximum configurable length of RX pkt. */
+ uint16_t max_rx_queues; /**< Maximum number of RX queues. */
+ uint16_t max_tx_queues; /**< Maximum number of TX queues. */
+ uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */
+ uint32_t max_hash_mac_addrs;
+ /** Maximum number of hash MAC addresses for MTA and UTA. */
+ uint16_t max_vfs; /**< Maximum number of VFs. */
+ uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */
+ uint32_t rx_offload_capa; /**< Device RX offload capabilities. */
+ uint32_t tx_offload_capa; /**< Device TX offload capabilities. */
+ uint16_t reta_size;
+ /**< Device redirection table size, the total number of entries. */
+ uint8_t hash_key_size; /**< Hash key size in bytes */
+ /** Bit mask of RSS offloads, the bit offset also means flow type */
+ uint64_t flow_type_rss_offloads;
+ struct rte_eth_rxconf default_rxconf; /**< Default RX configuration */
+ struct rte_eth_txconf default_txconf; /**< Default TX configuration */
+ uint16_t vmdq_queue_base; /**< First queue ID for VMDQ pools. */
+ uint16_t vmdq_queue_num; /**< Queue number for VMDQ pools. */
+ uint16_t vmdq_pool_base; /**< First ID of VMDQ pools. */
+ struct rte_eth_desc_lim rx_desc_lim; /**< RX descriptors limits */
+ struct rte_eth_desc_lim tx_desc_lim; /**< TX descriptors limits */
+ uint32_t speed_capa; /**< Supported speeds bitmap (ETH_LINK_SPEED_). */
+};
+
+/**
+ * Ethernet device RX queue information structure.
+ * Used to retieve information about configured queue.
+ */
+struct rte_eth_rxq_info {
+ struct rte_mempool *mp; /**< mempool used by that queue. */
+ struct rte_eth_rxconf conf; /**< queue config parameters. */
+ uint8_t scattered_rx; /**< scattered packets RX supported. */
+ uint16_t nb_desc; /**< configured number of RXDs. */
+} __rte_cache_min_aligned;
+
+/**
+ * Ethernet device TX queue information structure.
+ * Used to retieve information about configured queue.
+ */
+struct rte_eth_txq_info {
+ struct rte_eth_txconf conf; /**< queue config parameters. */
+ uint16_t nb_desc; /**< configured number of TXDs. */
+} __rte_cache_min_aligned;
+
+/** Maximum name length for extended statistics counters */
+#define RTE_ETH_XSTATS_NAME_SIZE 64
+
+/**
+ * An Ethernet device extended statistic structure
+ *
+ * This structure is used by ethdev->eth_xstats_get() to provide
+ * statistics that are not provided in the generic rte_eth_stats
+ * structure.
+ */
+struct rte_eth_xstats {
+ char name[RTE_ETH_XSTATS_NAME_SIZE];
+ uint64_t value;
+};
+
+#define ETH_DCB_NUM_TCS 8
+#define ETH_MAX_VMDQ_POOL 64
+
+/**
+ * A structure used to get the information of queue and
+ * TC mapping on both TX and RX paths.
+ */
+struct rte_eth_dcb_tc_queue_mapping {
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_rxq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+ /** rx queues assigned to tc per Pool */
+ struct {
+ uint8_t base;
+ uint8_t nb_queue;
+ } tc_txq[ETH_MAX_VMDQ_POOL][ETH_DCB_NUM_TCS];
+};
+
+/**
+ * A structure used to get the information of DCB.
+ * It includes TC UP mapping and queue TC mapping.
+ */
+struct rte_eth_dcb_info {
+ uint8_t nb_tcs; /**< number of TCs */
+ uint8_t prio_tc[ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */
+ uint8_t tc_bws[ETH_DCB_NUM_TCS]; /**< TX BW percentage for each TC */
+ /** rx queues assigned to tc */
+ struct rte_eth_dcb_tc_queue_mapping tc_queue;
+};
+
+/**
+ * RX/TX queue states
+ */
+#define RTE_ETH_QUEUE_STATE_STOPPED 0
+#define RTE_ETH_QUEUE_STATE_STARTED 1
+
+struct rte_eth_dev;
+
+struct rte_eth_dev_callback;
+/** @internal Structure to keep track of registered callbacks */
+TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
+
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+#define RTE_PMD_DEBUG_TRACE(...) \
+ rte_pmd_debug_trace(__func__, __VA_ARGS__)
+#else
+#define RTE_PMD_DEBUG_TRACE(...)
+#endif
+
+
+/* Macros to check for valid port */
+#define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \
+ if (!rte_eth_dev_is_valid_port(port_id)) { \
+ RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
+ return retval; \
+ } \
+} while (0)
+
+#define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \
+ if (!rte_eth_dev_is_valid_port(port_id)) { \
+ RTE_PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id); \
+ return; \
+ } \
+} while (0)
+
+/**
+ * l2 tunnel configuration.
+ */
+
+/**< l2 tunnel enable mask */
+#define ETH_L2_TUNNEL_ENABLE_MASK 0x00000001
+/**< l2 tunnel insertion mask */
+#define ETH_L2_TUNNEL_INSERTION_MASK 0x00000002
+/**< l2 tunnel stripping mask */
+#define ETH_L2_TUNNEL_STRIPPING_MASK 0x00000004
+/**< l2 tunnel forwarding mask */
+#define ETH_L2_TUNNEL_FORWARDING_MASK 0x00000008
+
+/*
+ * Definitions of all functions exported by an Ethernet driver through the
+ * the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev*
+ * structure associated with an Ethernet device.
+ */
+
+typedef int (*eth_dev_configure_t)(struct rte_eth_dev *dev);
+/**< @internal Ethernet device configuration. */
+
+typedef int (*eth_dev_start_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to start a configured Ethernet device. */
+
+typedef void (*eth_dev_stop_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to stop a configured Ethernet device. */
+
+typedef int (*eth_dev_set_link_up_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to link up a configured Ethernet device. */
+
+typedef int (*eth_dev_set_link_down_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to link down a configured Ethernet device. */
+
+typedef void (*eth_dev_close_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to close a configured Ethernet device. */
+
+typedef void (*eth_promiscuous_enable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to enable the RX promiscuous mode of an Ethernet device. */
+
+typedef void (*eth_promiscuous_disable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to disable the RX promiscuous mode of an Ethernet device. */
+
+typedef void (*eth_allmulticast_enable_t)(struct rte_eth_dev *dev);
+/**< @internal Enable the receipt of all multicast packets by an Ethernet device. */
+
+typedef void (*eth_allmulticast_disable_t)(struct rte_eth_dev *dev);
+/**< @internal Disable the receipt of all multicast packets by an Ethernet device. */
+
+typedef int (*eth_link_update_t)(struct rte_eth_dev *dev,
+ int wait_to_complete);
+/**< @internal Get link speed, duplex mode and state (up/down) of an Ethernet device. */
+
+typedef void (*eth_stats_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_stats *igb_stats);
+/**< @internal Get global I/O statistics of an Ethernet device. */
+
+typedef void (*eth_stats_reset_t)(struct rte_eth_dev *dev);
+/**< @internal Reset global I/O statistics of an Ethernet device to 0. */
+
+typedef int (*eth_xstats_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_xstats *stats, unsigned n);
+/**< @internal Get extended stats of an Ethernet device. */
+
+typedef void (*eth_xstats_reset_t)(struct rte_eth_dev *dev);
+/**< @internal Reset extended stats of an Ethernet device. */
+
+typedef int (*eth_queue_stats_mapping_set_t)(struct rte_eth_dev *dev,
+ uint16_t queue_id,
+ uint8_t stat_idx,
+ uint8_t is_rx);
+/**< @internal Set a queue statistics mapping for a tx/rx queue of an Ethernet device. */
+
+typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_dev_info *dev_info);
+/**< @internal Get specific informations of an Ethernet device. */
+
+typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
+/**< @internal Get supported ptypes of an Ethernet device. */
+
+typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
+ uint16_t queue_id);
+/**< @internal Start rx and tx of a queue of an Ethernet device. */
+
+typedef int (*eth_queue_stop_t)(struct rte_eth_dev *dev,
+ uint16_t queue_id);
+/**< @internal Stop rx and tx of a queue of an Ethernet device. */
+
+typedef int (*eth_rx_queue_setup_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ uint16_t nb_rx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool);
+/**< @internal Set up a receive queue of an Ethernet device. */
+
+typedef int (*eth_tx_queue_setup_t)(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id,
+ uint16_t nb_tx_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf);
+/**< @internal Setup a transmit queue of an Ethernet device. */
+
+typedef int (*eth_rx_enable_intr_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id);
+/**< @internal Enable interrupt of a receive queue of an Ethernet device. */
+
+typedef int (*eth_rx_disable_intr_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id);
+/**< @internal Disable interrupt of a receive queue of an Ethernet device. */
+
+typedef void (*eth_queue_release_t)(void *queue);
+/**< @internal Release memory resources allocated by given RX/TX queue. */
+
+typedef uint32_t (*eth_rx_queue_count_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id);
+/**< @internal Get number of available descriptors on a receive queue of an Ethernet device. */
+
+typedef int (*eth_rx_descriptor_done_t)(void *rxq, uint16_t offset);
+/**< @internal Check DD bit of specific RX descriptor */
+
+typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id, struct rte_eth_rxq_info *qinfo);
+
+typedef void (*eth_txq_info_get_t)(struct rte_eth_dev *dev,
+ uint16_t tx_queue_id, struct rte_eth_txq_info *qinfo);
+
+typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
+/**< @internal Set MTU. */
+
+typedef int (*vlan_filter_set_t)(struct rte_eth_dev *dev,
+ uint16_t vlan_id,
+ int on);
+/**< @internal filtering of a VLAN Tag Identifier by an Ethernet device. */
+
+typedef int (*vlan_tpid_set_t)(struct rte_eth_dev *dev,
+ enum rte_vlan_type type, uint16_t tpid);
+/**< @internal set the outer VLAN-TPID by an Ethernet device. */
+
+typedef void (*vlan_offload_set_t)(struct rte_eth_dev *dev, int mask);
+/**< @internal set VLAN offload function by an Ethernet device. */
+
+typedef int (*vlan_pvid_set_t)(struct rte_eth_dev *dev,
+ uint16_t vlan_id,
+ int on);
+/**< @internal set port based TX VLAN insertion by an Ethernet device. */
+
+typedef void (*vlan_strip_queue_set_t)(struct rte_eth_dev *dev,
+ uint16_t rx_queue_id,
+ int on);
+/**< @internal VLAN stripping enable/disable by an queue of Ethernet device. */
+
+typedef uint16_t (*eth_rx_burst_t)(void *rxq,
+ struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts);
+/**< @internal Retrieve input packets from a receive queue of an Ethernet device. */
+
+typedef uint16_t (*eth_tx_burst_t)(void *txq,
+ struct rte_mbuf **tx_pkts,
+ uint16_t nb_pkts);
+/**< @internal Send output packets on a transmit queue of an Ethernet device. */
+
+typedef int (*flow_ctrl_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf);
+/**< @internal Get current flow control parameter on an Ethernet device */
+
+typedef int (*flow_ctrl_set_t)(struct rte_eth_dev *dev,
+ struct rte_eth_fc_conf *fc_conf);
+/**< @internal Setup flow control parameter on an Ethernet device */
+
+typedef int (*priority_flow_ctrl_set_t)(struct rte_eth_dev *dev,
+ struct rte_eth_pfc_conf *pfc_conf);
+/**< @internal Setup priority flow control parameter on an Ethernet device */
+
+typedef int (*reta_update_t)(struct rte_eth_dev *dev,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
+/**< @internal Update RSS redirection table on an Ethernet device */
+
+typedef int (*reta_query_t)(struct rte_eth_dev *dev,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
+/**< @internal Query RSS redirection table on an Ethernet device */
+
+typedef int (*rss_hash_update_t)(struct rte_eth_dev *dev,
+ struct rte_eth_rss_conf *rss_conf);
+/**< @internal Update RSS hash configuration of an Ethernet device */
+
+typedef int (*rss_hash_conf_get_t)(struct rte_eth_dev *dev,
+ struct rte_eth_rss_conf *rss_conf);
+/**< @internal Get current RSS hash configuration of an Ethernet device */
+
+typedef int (*eth_dev_led_on_t)(struct rte_eth_dev *dev);
+/**< @internal Turn on SW controllable LED on an Ethernet device */
+
+typedef int (*eth_dev_led_off_t)(struct rte_eth_dev *dev);
+/**< @internal Turn off SW controllable LED on an Ethernet device */
+
+typedef void (*eth_mac_addr_remove_t)(struct rte_eth_dev *dev, uint32_t index);
+/**< @internal Remove MAC address from receive address register */
+
+typedef void (*eth_mac_addr_add_t)(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint32_t index,
+ uint32_t vmdq);
+/**< @internal Set a MAC address into Receive Address Address Register */
+
+typedef void (*eth_mac_addr_set_t)(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr);
+/**< @internal Set a MAC address into Receive Address Address Register */
+
+typedef int (*eth_uc_hash_table_set_t)(struct rte_eth_dev *dev,
+ struct ether_addr *mac_addr,
+ uint8_t on);
+/**< @internal Set a Unicast Hash bitmap */
+
+typedef int (*eth_uc_all_hash_table_set_t)(struct rte_eth_dev *dev,
+ uint8_t on);
+/**< @internal Set all Unicast Hash bitmap */
+
+typedef int (*eth_set_vf_rx_mode_t)(struct rte_eth_dev *dev,
+ uint16_t vf,
+ uint16_t rx_mode,
+ uint8_t on);
+/**< @internal Set a VF receive mode */
+
+typedef int (*eth_set_vf_rx_t)(struct rte_eth_dev *dev,
+ uint16_t vf,
+ uint8_t on);
+/**< @internal Set a VF receive mode */
+
+typedef int (*eth_set_vf_tx_t)(struct rte_eth_dev *dev,
+ uint16_t vf,
+ uint8_t on);
+/**< @internal Enable or disable a VF transmit */
+
+typedef int (*eth_set_vf_vlan_filter_t)(struct rte_eth_dev *dev,
+ uint16_t vlan,
+ uint64_t vf_mask,
+ uint8_t vlan_on);
+/**< @internal Set VF VLAN pool filter */
+
+typedef int (*eth_set_queue_rate_limit_t)(struct rte_eth_dev *dev,
+ uint16_t queue_idx,
+ uint16_t tx_rate);
+/**< @internal Set queue TX rate */
+
+typedef int (*eth_set_vf_rate_limit_t)(struct rte_eth_dev *dev,
+ uint16_t vf,
+ uint16_t tx_rate,
+ uint64_t q_msk);
+/**< @internal Set VF TX rate */
+
+typedef int (*eth_mirror_rule_set_t)(struct rte_eth_dev *dev,
+ struct rte_eth_mirror_conf *mirror_conf,
+ uint8_t rule_id,
+ uint8_t on);
+/**< @internal Add a traffic mirroring rule on an Ethernet device */
+
+typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev,
+ uint8_t rule_id);
+/**< @internal Remove a traffic mirroring rule on an Ethernet device */
+
+typedef int (*eth_udp_tunnel_port_add_t)(struct rte_eth_dev *dev,
+ struct rte_eth_udp_tunnel *tunnel_udp);
+/**< @internal Add tunneling UDP port */
+
+typedef int (*eth_udp_tunnel_port_del_t)(struct rte_eth_dev *dev,
+ struct rte_eth_udp_tunnel *tunnel_udp);
+/**< @internal Delete tunneling UDP port */
+
+typedef int (*eth_set_mc_addr_list_t)(struct rte_eth_dev *dev,
+ struct ether_addr *mc_addr_set,
+ uint32_t nb_mc_addr);
+/**< @internal set the list of multicast addresses on an Ethernet device */
+
+typedef int (*eth_timesync_enable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to enable IEEE1588/802.1AS timestamping. */
+
+typedef int (*eth_timesync_disable_t)(struct rte_eth_dev *dev);
+/**< @internal Function used to disable IEEE1588/802.1AS timestamping. */
+
+typedef int (*eth_timesync_read_rx_timestamp_t)(struct rte_eth_dev *dev,
+ struct timespec *timestamp,
+ uint32_t flags);
+/**< @internal Function used to read an RX IEEE1588/802.1AS timestamp. */
+
+typedef int (*eth_timesync_read_tx_timestamp_t)(struct rte_eth_dev *dev,
+ struct timespec *timestamp);
+/**< @internal Function used to read a TX IEEE1588/802.1AS timestamp. */
+
+typedef int (*eth_timesync_adjust_time)(struct rte_eth_dev *dev, int64_t);
+/**< @internal Function used to adjust the device clock */
+
+typedef int (*eth_timesync_read_time)(struct rte_eth_dev *dev,
+ struct timespec *timestamp);
+/**< @internal Function used to get time from the device clock. */
+
+typedef int (*eth_timesync_write_time)(struct rte_eth_dev *dev,
+ const struct timespec *timestamp);
+/**< @internal Function used to get time from the device clock */
+
+typedef int (*eth_get_reg_length_t)(struct rte_eth_dev *dev);
+/**< @internal Retrieve device register count */
+
+typedef int (*eth_get_reg_t)(struct rte_eth_dev *dev,
+ struct rte_dev_reg_info *info);
+/**< @internal Retrieve registers */
+
+typedef int (*eth_get_eeprom_length_t)(struct rte_eth_dev *dev);
+/**< @internal Retrieve eeprom size */
+
+typedef int (*eth_get_eeprom_t)(struct rte_eth_dev *dev,
+ struct rte_dev_eeprom_info *info);
+/**< @internal Retrieve eeprom data */
+
+typedef int (*eth_set_eeprom_t)(struct rte_eth_dev *dev,
+ struct rte_dev_eeprom_info *info);
+/**< @internal Program eeprom data */
+
+typedef int (*eth_l2_tunnel_eth_type_conf_t)
+ (struct rte_eth_dev *dev, struct rte_eth_l2_tunnel_conf *l2_tunnel);
+/**< @internal config l2 tunnel ether type */
+
+typedef int (*eth_l2_tunnel_offload_set_t)
+ (struct rte_eth_dev *dev,
+ struct rte_eth_l2_tunnel_conf *l2_tunnel,
+ uint32_t mask,
+ uint8_t en);
+/**< @internal enable/disable the l2 tunnel offload functions */
+
+#ifdef RTE_NIC_BYPASS
+
+enum {
+ RTE_BYPASS_MODE_NONE,
+ RTE_BYPASS_MODE_NORMAL,
+ RTE_BYPASS_MODE_BYPASS,
+ RTE_BYPASS_MODE_ISOLATE,
+ RTE_BYPASS_MODE_NUM,
+};
+
+#define RTE_BYPASS_MODE_VALID(x) \
+ ((x) > RTE_BYPASS_MODE_NONE && (x) < RTE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_BYPASS_EVENT_NONE,
+ RTE_BYPASS_EVENT_START,
+ RTE_BYPASS_EVENT_OS_ON = RTE_BYPASS_EVENT_START,
+ RTE_BYPASS_EVENT_POWER_ON,
+ RTE_BYPASS_EVENT_OS_OFF,
+ RTE_BYPASS_EVENT_POWER_OFF,
+ RTE_BYPASS_EVENT_TIMEOUT,
+ RTE_BYPASS_EVENT_NUM
+};
+
+#define RTE_BYPASS_EVENT_VALID(x) \
+ ((x) > RTE_BYPASS_EVENT_NONE && (x) < RTE_BYPASS_MODE_NUM)
+
+enum {
+ RTE_BYPASS_TMT_OFF, /* timeout disabled. */
+ RTE_BYPASS_TMT_1_5_SEC, /* timeout for 1.5 seconds */
+ RTE_BYPASS_TMT_2_SEC, /* timeout for 2 seconds */
+ RTE_BYPASS_TMT_3_SEC, /* timeout for 3 seconds */
+ RTE_BYPASS_TMT_4_SEC, /* timeout for 4 seconds */
+ RTE_BYPASS_TMT_8_SEC, /* timeout for 8 seconds */
+ RTE_BYPASS_TMT_16_SEC, /* timeout for 16 seconds */
+ RTE_BYPASS_TMT_32_SEC, /* timeout for 32 seconds */
+ RTE_BYPASS_TMT_NUM
+};
+
+#define RTE_BYPASS_TMT_VALID(x) \
+ ((x) == RTE_BYPASS_TMT_OFF || \
+ ((x) > RTE_BYPASS_TMT_OFF && (x) < RTE_BYPASS_TMT_NUM))
+
+typedef void (*bypass_init_t)(struct rte_eth_dev *dev);
+typedef int32_t (*bypass_state_set_t)(struct rte_eth_dev *dev, uint32_t *new_state);
+typedef int32_t (*bypass_state_show_t)(struct rte_eth_dev *dev, uint32_t *state);
+typedef int32_t (*bypass_event_set_t)(struct rte_eth_dev *dev, uint32_t state, uint32_t event);
+typedef int32_t (*bypass_event_show_t)(struct rte_eth_dev *dev, uint32_t event_shift, uint32_t *event);
+typedef int32_t (*bypass_wd_timeout_set_t)(struct rte_eth_dev *dev, uint32_t timeout);
+typedef int32_t (*bypass_wd_timeout_show_t)(struct rte_eth_dev *dev, uint32_t *wd_timeout);
+typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
+typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
+#endif
+
+typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
+ enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op,
+ void *arg);
+/**< @internal Take operations to assigned filter type on an Ethernet device */
+
+typedef int (*eth_get_dcb_info)(struct rte_eth_dev *dev,
+ struct rte_eth_dcb_info *dcb_info);
+/**< @internal Get dcb information on an Ethernet device */
+
+/**
+ * @internal A structure containing the functions exported by an Ethernet driver.
+ */
+struct eth_dev_ops {
+ eth_dev_configure_t dev_configure; /**< Configure device. */
+ eth_dev_start_t dev_start; /**< Start device. */
+ eth_dev_stop_t dev_stop; /**< Stop device. */
+ eth_dev_set_link_up_t dev_set_link_up; /**< Device link up. */
+ eth_dev_set_link_down_t dev_set_link_down; /**< Device link down. */
+ eth_dev_close_t dev_close; /**< Close device. */
+ eth_promiscuous_enable_t promiscuous_enable; /**< Promiscuous ON. */
+ eth_promiscuous_disable_t promiscuous_disable;/**< Promiscuous OFF. */
+ eth_allmulticast_enable_t allmulticast_enable;/**< RX multicast ON. */
+ eth_allmulticast_disable_t allmulticast_disable;/**< RX multicast OF. */
+ eth_link_update_t link_update; /**< Get device link state. */
+ eth_stats_get_t stats_get; /**< Get generic device statistics. */
+ eth_stats_reset_t stats_reset; /**< Reset generic device statistics. */
+ eth_xstats_get_t xstats_get; /**< Get extended device statistics. */
+ eth_xstats_reset_t xstats_reset; /**< Reset extended device statistics. */
+ eth_queue_stats_mapping_set_t queue_stats_mapping_set;
+ /**< Configure per queue stat counter mapping. */
+ eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
+ eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
+ /**< Get packet types supported and identified by device*/
+ mtu_set_t mtu_set; /**< Set MTU. */
+ vlan_filter_set_t vlan_filter_set; /**< Filter VLAN Setup. */
+ vlan_tpid_set_t vlan_tpid_set; /**< Outer VLAN TPID Setup. */
+ vlan_strip_queue_set_t vlan_strip_queue_set; /**< VLAN Stripping on queue. */
+ vlan_offload_set_t vlan_offload_set; /**< Set VLAN Offload. */
+ vlan_pvid_set_t vlan_pvid_set; /**< Set port based TX VLAN insertion */
+ eth_queue_start_t rx_queue_start;/**< Start RX for a queue.*/
+ eth_queue_stop_t rx_queue_stop;/**< Stop RX for a queue.*/
+ eth_queue_start_t tx_queue_start;/**< Start TX for a queue.*/
+ eth_queue_stop_t tx_queue_stop;/**< Stop TX for a queue.*/
+ eth_rx_queue_setup_t rx_queue_setup;/**< Set up device RX queue.*/
+ eth_queue_release_t rx_queue_release;/**< Release RX queue.*/
+ eth_rx_queue_count_t rx_queue_count; /**< Get Rx queue count. */
+ eth_rx_descriptor_done_t rx_descriptor_done; /**< Check rxd DD bit */
+ /**< Enable Rx queue interrupt. */
+ eth_rx_enable_intr_t rx_queue_intr_enable;
+ /**< Disable Rx queue interrupt.*/
+ eth_rx_disable_intr_t rx_queue_intr_disable;
+ eth_tx_queue_setup_t tx_queue_setup;/**< Set up device TX queue.*/
+ eth_queue_release_t tx_queue_release;/**< Release TX queue.*/
+ eth_dev_led_on_t dev_led_on; /**< Turn on LED. */
+ eth_dev_led_off_t dev_led_off; /**< Turn off LED. */
+ flow_ctrl_get_t flow_ctrl_get; /**< Get flow control. */
+ flow_ctrl_set_t flow_ctrl_set; /**< Setup flow control. */
+ priority_flow_ctrl_set_t priority_flow_ctrl_set; /**< Setup priority flow control.*/
+ eth_mac_addr_remove_t mac_addr_remove; /**< Remove MAC address */
+ eth_mac_addr_add_t mac_addr_add; /**< Add a MAC address */
+ eth_mac_addr_set_t mac_addr_set; /**< Set a MAC address */
+ eth_uc_hash_table_set_t uc_hash_table_set; /**< Set Unicast Table Array */
+ eth_uc_all_hash_table_set_t uc_all_hash_table_set; /**< Set Unicast hash bitmap */
+ eth_mirror_rule_set_t mirror_rule_set; /**< Add a traffic mirror rule.*/
+ eth_mirror_rule_reset_t mirror_rule_reset; /**< reset a traffic mirror rule.*/
+ eth_set_vf_rx_mode_t set_vf_rx_mode; /**< Set VF RX mode */
+ eth_set_vf_rx_t set_vf_rx; /**< enable/disable a VF receive */
+ eth_set_vf_tx_t set_vf_tx; /**< enable/disable a VF transmit */
+ eth_set_vf_vlan_filter_t set_vf_vlan_filter; /**< Set VF VLAN filter */
+ /** Add UDP tunnel port. */
+ eth_udp_tunnel_port_add_t udp_tunnel_port_add;
+ /** Del UDP tunnel port. */
+ eth_udp_tunnel_port_del_t udp_tunnel_port_del;
+ eth_set_queue_rate_limit_t set_queue_rate_limit; /**< Set queue rate limit */
+ eth_set_vf_rate_limit_t set_vf_rate_limit; /**< Set VF rate limit */
+ /** Update redirection table. */
+ reta_update_t reta_update;
+ /** Query redirection table. */
+ reta_query_t reta_query;
+
+ eth_get_reg_length_t get_reg_length;
+ /**< Get # of registers */
+ eth_get_reg_t get_reg;
+ /**< Get registers */
+ eth_get_eeprom_length_t get_eeprom_length;
+ /**< Get eeprom length */
+ eth_get_eeprom_t get_eeprom;
+ /**< Get eeprom data */
+ eth_set_eeprom_t set_eeprom;
+ /**< Set eeprom */
+ /* bypass control */
+#ifdef RTE_NIC_BYPASS
+ bypass_init_t bypass_init;
+ bypass_state_set_t bypass_state_set;
+ bypass_state_show_t bypass_state_show;
+ bypass_event_set_t bypass_event_set;
+ bypass_event_show_t bypass_event_show;
+ bypass_wd_timeout_set_t bypass_wd_timeout_set;
+ bypass_wd_timeout_show_t bypass_wd_timeout_show;
+ bypass_ver_show_t bypass_ver_show;
+ bypass_wd_reset_t bypass_wd_reset;
+#endif
+
+ /** Configure RSS hash protocols. */
+ rss_hash_update_t rss_hash_update;
+ /** Get current RSS hash configuration. */
+ rss_hash_conf_get_t rss_hash_conf_get;
+ eth_filter_ctrl_t filter_ctrl;
+ /**< common filter control. */
+ eth_set_mc_addr_list_t set_mc_addr_list; /**< set list of mcast addrs */
+ eth_rxq_info_get_t rxq_info_get;
+ /**< retrieve RX queue information. */
+ eth_txq_info_get_t txq_info_get;
+ /**< retrieve TX queue information. */
+ /** Turn IEEE1588/802.1AS timestamping on. */
+ eth_timesync_enable_t timesync_enable;
+ /** Turn IEEE1588/802.1AS timestamping off. */
+ eth_timesync_disable_t timesync_disable;
+ /** Read the IEEE1588/802.1AS RX timestamp. */
+ eth_timesync_read_rx_timestamp_t timesync_read_rx_timestamp;
+ /** Read the IEEE1588/802.1AS TX timestamp. */
+ eth_timesync_read_tx_timestamp_t timesync_read_tx_timestamp;
+
+ /** Get DCB information */
+ eth_get_dcb_info get_dcb_info;
+ /** Adjust the device clock.*/
+ eth_timesync_adjust_time timesync_adjust_time;
+ /** Get the device clock time. */
+ eth_timesync_read_time timesync_read_time;
+ /** Set the device clock time. */
+ eth_timesync_write_time timesync_write_time;
+ /** Config ether type of l2 tunnel */
+ eth_l2_tunnel_eth_type_conf_t l2_tunnel_eth_type_conf;
+ /** Enable/disable l2 tunnel offload functions */
+ eth_l2_tunnel_offload_set_t l2_tunnel_offload_set;
+};
+
+/**
+ * Function type used for RX packet processing packet callbacks.
+ *
+ * The callback function is called on RX with a burst of packets that have
+ * been received on the given port and queue.
+ *
+ * @param port
+ * The Ethernet port on which RX is being performed.
+ * @param queue
+ * The queue on the Ethernet port which is being used to receive the packets.
+ * @param pkts
+ * The burst of packets that have just been received.
+ * @param nb_pkts
+ * The number of packets in the burst pointed to by "pkts".
+ * @param max_pkts
+ * The max number of packets that can be stored in the "pkts" array.
+ * @param user_param
+ * The arbitrary user parameter passed in by the application when the callback
+ * was originally configured.
+ * @return
+ * The number of packets returned to the user.
+ */
+typedef uint16_t (*rte_rx_callback_fn)(uint8_t port, uint16_t queue,
+ struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts,
+ void *user_param);
+
+/**
+ * Function type used for TX packet processing packet callbacks.
+ *
+ * The callback function is called on TX with a burst of packets immediately
+ * before the packets are put onto the hardware queue for transmission.
+ *
+ * @param port
+ * The Ethernet port on which TX is being performed.
+ * @param queue
+ * The queue on the Ethernet port which is being used to transmit the packets.
+ * @param pkts
+ * The burst of packets that are about to be transmitted.
+ * @param nb_pkts
+ * The number of packets in the burst pointed to by "pkts".
+ * @param user_param
+ * The arbitrary user parameter passed in by the application when the callback
+ * was originally configured.
+ * @return
+ * The number of packets to be written to the NIC.
+ */
+typedef uint16_t (*rte_tx_callback_fn)(uint8_t port, uint16_t queue,
+ struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param);
+
+/**
+ * @internal
+ * Structure used to hold information about the callbacks to be called for a
+ * queue on RX and TX.
+ */
+struct rte_eth_rxtx_callback {
+ struct rte_eth_rxtx_callback *next;
+ union{
+ rte_rx_callback_fn rx;
+ rte_tx_callback_fn tx;
+ } fn;
+ void *param;
+};
+
+/**
+ * The eth device type.
+ */
+enum rte_eth_dev_type {
+ RTE_ETH_DEV_UNKNOWN, /**< unknown device type */
+ RTE_ETH_DEV_PCI,
+ /**< Physical function and Virtual function of PCI devices */
+ RTE_ETH_DEV_VIRTUAL, /**< non hardware device */
+ RTE_ETH_DEV_MAX /**< max value of this enum */
+};
+
+/**
+ * @internal
+ * The generic data structure associated with each ethernet device.
+ *
+ * Pointers to burst-oriented packet receive and transmit functions are
+ * located at the beginning of the structure, along with the pointer to
+ * where all the data elements for the particular device are stored in shared
+ * memory. This split allows the function pointer and driver data to be per-
+ * process, while the actual configuration data for the device is shared.
+ */
+struct rte_eth_dev {
+ eth_rx_burst_t rx_pkt_burst; /**< Pointer to PMD receive function. */
+ eth_tx_burst_t tx_pkt_burst; /**< Pointer to PMD transmit function. */
+ struct rte_eth_dev_data *data; /**< Pointer to device data */
+ const struct eth_driver *driver;/**< Driver for this device */
+ const struct eth_dev_ops *dev_ops; /**< Functions exported by PMD */
+ struct rte_pci_device *pci_dev; /**< PCI info. supplied by probing */
+ /** User application callbacks for NIC interrupts */
+ struct rte_eth_dev_cb_list link_intr_cbs;
+ /**
+ * User-supplied functions called from rx_burst to post-process
+ * received packets before passing them to the user
+ */
+ struct rte_eth_rxtx_callback *post_rx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
+ /**
+ * User-supplied functions called from tx_burst to pre-process
+ * received packets before passing them to the driver for transmission.
+ */
+ struct rte_eth_rxtx_callback *pre_tx_burst_cbs[RTE_MAX_QUEUES_PER_PORT];
+ uint8_t attached; /**< Flag indicating the port is attached */
+ enum rte_eth_dev_type dev_type; /**< Flag indicating the device type */
+};
+
+struct rte_eth_dev_sriov {
+ uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */
+ uint8_t nb_q_per_pool; /**< rx queue number per pool */
+ uint16_t def_vmdq_idx; /**< Default pool num used for PF */
+ uint16_t def_pool_q_idx; /**< Default pool queue start reg index */
+};
+#define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov)
+
+#define RTE_ETH_NAME_MAX_LEN (32)
+
+/**
+ * @internal
+ * The data part, with no function pointers, associated with each ethernet device.
+ *
+ * This structure is safe to place in shared memory to be common among different
+ * processes in a multi-process configuration.
+ */
+struct rte_eth_dev_data {
+ char name[RTE_ETH_NAME_MAX_LEN]; /**< Unique identifier name */
+
+ void **rx_queues; /**< Array of pointers to RX queues. */
+ void **tx_queues; /**< Array of pointers to TX queues. */
+ uint16_t nb_rx_queues; /**< Number of RX queues. */
+ uint16_t nb_tx_queues; /**< Number of TX queues. */
+
+ struct rte_eth_dev_sriov sriov; /**< SRIOV data */
+
+ void *dev_private; /**< PMD-specific private data */
+
+ struct rte_eth_link dev_link;
+ /**< Link-level information & status */
+
+ struct rte_eth_conf dev_conf; /**< Configuration applied to device. */
+ uint16_t mtu; /**< Maximum Transmission Unit. */
+
+ uint32_t min_rx_buf_size;
+ /**< Common rx buffer size handled by all queues */
+
+ uint64_t rx_mbuf_alloc_failed; /**< RX ring mbuf allocation failures. */
+ struct ether_addr* mac_addrs;/**< Device Ethernet Link address. */
+ uint64_t mac_pool_sel[ETH_NUM_RECEIVE_MAC_ADDR];
+ /** bitmap array of associating Ethernet MAC addresses to pools */
+ struct ether_addr* hash_mac_addrs;
+ /** Device Ethernet MAC addresses of hash filtering. */
+ uint8_t port_id; /**< Device [external] port identifier. */
+ uint8_t promiscuous : 1, /**< RX promiscuous mode ON(1) / OFF(0). */
+ scattered_rx : 1, /**< RX of scattered packets is ON(1) / OFF(0) */
+ all_multicast : 1, /**< RX all multicast mode ON(1) / OFF(0). */
+ dev_started : 1, /**< Device state: STARTED(1) / STOPPED(0). */
+ lro : 1; /**< RX LRO is ON(1) / OFF(0) */
+ uint8_t rx_queue_state[RTE_MAX_QUEUES_PER_PORT];
+ /** Queues state: STARTED(1) / STOPPED(0) */
+ uint8_t tx_queue_state[RTE_MAX_QUEUES_PER_PORT];
+ /** Queues state: STARTED(1) / STOPPED(0) */
+ uint32_t dev_flags; /**< Capabilities */
+ enum rte_kernel_driver kdrv; /**< Kernel driver passthrough */
+ int numa_node; /**< NUMA node connection */
+ const char *drv_name; /**< Driver name */
+};
+
+/** Device supports hotplug detach */
+#define RTE_ETH_DEV_DETACHABLE 0x0001
+/** Device supports link state interrupt */
+#define RTE_ETH_DEV_INTR_LSC 0x0002
+/** Device is a bonded slave */
+#define RTE_ETH_DEV_BONDED_SLAVE 0x0004
+
+/**
+ * @internal
+ * The pool of *rte_eth_dev* structures. The size of the pool
+ * is configured at compile-time in the <rte_ethdev.c> file.
+ */
+extern struct rte_eth_dev rte_eth_devices[];
+
+/**
+ * Get the total number of Ethernet devices that have been successfully
+ * initialized by the [matching] Ethernet driver during the PCI probing phase.
+ * All devices whose port identifier is in the range
+ * [0, rte_eth_dev_count() - 1] can be operated on by network applications
+ * immediately after invoking rte_eal_init().
+ * If the application unplugs a port using hotplug function, The enabled port
+ * numbers may be noncontiguous. In the case, the applications need to manage
+ * enabled port by themselves.
+ *
+ * @return
+ * - The total number of usable Ethernet devices.
+ */
+uint8_t rte_eth_dev_count(void);
+
+/**
+ * @internal
+ * Returns a ethdev slot specified by the unique identifier name.
+ *
+ * @param name
+ * The pointer to the Unique identifier name for each Ethernet device
+ * @return
+ * - The pointer to the ethdev slot, on success. NULL on error
+ */
+struct rte_eth_dev *rte_eth_dev_allocated(const char *name);
+
+/**
+ * @internal
+ * Allocates a new ethdev slot for an ethernet device and returns the pointer
+ * to that slot for the driver to use.
+ *
+ * @param name Unique identifier name for each Ethernet device
+ * @param type Device type of this Ethernet device
+ * @return
+ * - Slot in the rte_dev_devices array for a new device;
+ */
+struct rte_eth_dev *rte_eth_dev_allocate(const char *name,
+ enum rte_eth_dev_type type);
+
+/**
+ * @internal
+ * Release the specified ethdev port.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @return
+ * - 0 on success, negative on error
+ */
+int rte_eth_dev_release_port(struct rte_eth_dev *eth_dev);
+
+/**
+ * Attach a new Ethernet device specified by aruguments.
+ *
+ * @param devargs
+ * A pointer to a strings array describing the new device
+ * to be attached. The strings should be a pci address like
+ * '0000:01:00.0' or virtual device name like 'eth_pcap0'.
+ * @param port_id
+ * A pointer to a port identifier actually attached.
+ * @return
+ * 0 on success and port_id is filled, negative on error
+ */
+int rte_eth_dev_attach(const char *devargs, uint8_t *port_id);
+
+/**
+ * Detach a Ethernet device specified by port identifier.
+ * This function must be called when the device is in the
+ * closed state.
+ *
+ * @param port_id
+ * The port identifier of the device to detach.
+ * @param devname
+ * A pointer to a device name actually detached.
+ * @return
+ * 0 on success and devname is filled, negative on error
+ */
+int rte_eth_dev_detach(uint8_t port_id, char *devname);
+
+struct eth_driver;
+/**
+ * @internal
+ * Initialization function of an Ethernet driver invoked for each matching
+ * Ethernet PCI device detected during the PCI probing phase.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ * associated with the matching device and which have been [automatically]
+ * allocated in the *rte_eth_devices* array.
+ * The *eth_dev* structure is supplied to the driver initialization function
+ * with the following fields already initialized:
+ *
+ * - *pci_dev*: Holds the pointers to the *rte_pci_device* structure which
+ * contains the generic PCI information of the matching device.
+ *
+ * - *driver*: Holds the pointer to the *eth_driver* structure.
+ *
+ * - *dev_private*: Holds a pointer to the device private data structure.
+ *
+ * - *mtu*: Contains the default Ethernet maximum frame length (1500).
+ *
+ * - *port_id*: Contains the port index of the device (actually the index
+ * of the *eth_dev* structure in the *rte_eth_devices* array).
+ *
+ * @return
+ * - 0: Success, the device is properly initialized by the driver.
+ * In particular, the driver MUST have set up the *dev_ops* pointer
+ * of the *eth_dev* structure.
+ * - <0: Error code of the device initialization failure.
+ */
+typedef int (*eth_dev_init_t)(struct rte_eth_dev *eth_dev);
+
+/**
+ * @internal
+ * Finalization function of an Ethernet driver invoked for each matching
+ * Ethernet PCI device detected during the PCI closing phase.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ * associated with the matching device and which have been [automatically]
+ * allocated in the *rte_eth_devices* array.
+ * @return
+ * - 0: Success, the device is properly finalized by the driver.
+ * In particular, the driver MUST free the *dev_ops* pointer
+ * of the *eth_dev* structure.
+ * - <0: Error code of the device initialization failure.
+ */
+typedef int (*eth_dev_uninit_t)(struct rte_eth_dev *eth_dev);
+
+/**
+ * @internal
+ * The structure associated with a PMD Ethernet driver.
+ *
+ * Each Ethernet driver acts as a PCI driver and is represented by a generic
+ * *eth_driver* structure that holds:
+ *
+ * - An *rte_pci_driver* structure (which must be the first field).
+ *
+ * - The *eth_dev_init* function invoked for each matching PCI device.
+ *
+ * - The *eth_dev_uninit* function invoked for each matching PCI device.
+ *
+ * - The size of the private data to allocate for each matching device.
+ */
+struct eth_driver {
+ struct rte_pci_driver pci_drv; /**< The PMD is also a PCI driver. */
+ eth_dev_init_t eth_dev_init; /**< Device init function. */
+ eth_dev_uninit_t eth_dev_uninit; /**< Device uninit function. */
+ unsigned int dev_private_size; /**< Size of device private data. */
+};
+
+/**
+ * @internal
+ * A function invoked by the initialization function of an Ethernet driver
+ * to simultaneously register itself as a PCI driver and as an Ethernet
+ * Poll Mode Driver (PMD).
+ *
+ * @param eth_drv
+ * The pointer to the *eth_driver* structure associated with
+ * the Ethernet driver.
+ */
+void rte_eth_driver_register(struct eth_driver *eth_drv);
+
+/**
+ * Convert a numerical speed in Mbps to a bitmap flag that can be used in
+ * the bitmap link_speeds of the struct rte_eth_conf
+ *
+ * @param speed
+ * Numerical speed value in Mbps
+ * @param duplex
+ * ETH_LINK_[HALF/FULL]_DUPLEX (only for 10/100M speeds)
+ * @return
+ * 0 if the speed cannot be mapped
+ */
+uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex);
+
+/**
+ * Configure an Ethernet device.
+ * This function must be invoked first before any other function in the
+ * Ethernet API. This function can also be re-invoked when a device is in the
+ * stopped state.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device to configure.
+ * @param nb_rx_queue
+ * The number of receive queues to set up for the Ethernet device.
+ * @param nb_tx_queue
+ * The number of transmit queues to set up for the Ethernet device.
+ * @param eth_conf
+ * The pointer to the configuration data to be used for the Ethernet device.
+ * The *rte_eth_conf* structure includes:
+ * - the hardware offload features to activate, with dedicated fields for
+ * each statically configurable offload hardware feature provided by
+ * Ethernet devices, such as IP checksum or VLAN tag stripping for
+ * example.
+ * - the Receive Side Scaling (RSS) configuration when using multiple RX
+ * queues per port.
+ *
+ * Embedding all configuration information in a single data structure
+ * is the more flexible method that allows the addition of new features
+ * without changing the syntax of the API.
+ * @return
+ * - 0: Success, device configured.
+ * - <0: Error code returned by the driver configuration function.
+ */
+int rte_eth_dev_configure(uint8_t port_id, uint16_t nb_rx_queue,
+ uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf);
+
+/**
+ * Allocate and set up a receive queue for an Ethernet device.
+ *
+ * The function allocates a contiguous block of memory for *nb_rx_desc*
+ * receive descriptors from a memory zone associated with *socket_id*
+ * and initializes each receive descriptor with a network buffer allocated
+ * from the memory pool *mb_pool*.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ * The index of the receive queue to set up.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param nb_rx_desc
+ * The number of receive descriptors to allocate for the receive ring.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in case of NUMA.
+ * The value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
+ * the DMA memory allocated for the receive descriptors of the ring.
+ * @param rx_conf
+ * The pointer to the configuration data to be used for the receive queue.
+ * NULL value is allowed, in which case default RX configuration
+ * will be used.
+ * The *rx_conf* structure contains an *rx_thresh* structure with the values
+ * of the Prefetch, Host, and Write-Back threshold registers of the receive
+ * ring.
+ * @param mb_pool
+ * The pointer to the memory pool from which to allocate *rte_mbuf* network
+ * memory buffers to populate each descriptor of the receive ring.
+ * @return
+ * - 0: Success, receive queue correctly set up.
+ * - -EINVAL: The size of network buffers which can be allocated from the
+ * memory pool does not fit the various buffer sizes allowed by the
+ * device controller.
+ * - -ENOMEM: Unable to allocate the receive ring descriptors or to
+ * allocate network memory buffers from the memory pool when
+ * initializing receive descriptors.
+ */
+int rte_eth_rx_queue_setup(uint8_t port_id, uint16_t rx_queue_id,
+ uint16_t nb_rx_desc, unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool);
+
+/**
+ * Allocate and set up a transmit queue for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tx_queue_id
+ * The index of the transmit queue to set up.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param nb_tx_desc
+ * The number of transmit descriptors to allocate for the transmit ring.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in case of NUMA.
+ * Its value can be *SOCKET_ID_ANY* if there is no NUMA constraint for
+ * the DMA memory allocated for the transmit descriptors of the ring.
+ * @param tx_conf
+ * The pointer to the configuration data to be used for the transmit queue.
+ * NULL value is allowed, in which case default RX configuration
+ * will be used.
+ * The *tx_conf* structure contains the following data:
+ * - The *tx_thresh* structure with the values of the Prefetch, Host, and
+ * Write-Back threshold registers of the transmit ring.
+ * When setting Write-Back threshold to the value greater then zero,
+ * *tx_rs_thresh* value should be explicitly set to one.
+ * - The *tx_free_thresh* value indicates the [minimum] number of network
+ * buffers that must be pending in the transmit ring to trigger their
+ * [implicit] freeing by the driver transmit function.
+ * - The *tx_rs_thresh* value indicates the [minimum] number of transmit
+ * descriptors that must be pending in the transmit ring before setting the
+ * RS bit on a descriptor by the driver transmit function.
+ * The *tx_rs_thresh* value should be less or equal then
+ * *tx_free_thresh* value, and both of them should be less then
+ * *nb_tx_desc* - 3.
+ * - The *txq_flags* member contains flags to pass to the TX queue setup
+ * function to configure the behavior of the TX queue. This should be set
+ * to 0 if no special configuration is required.
+ *
+ * Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces
+ * the transmit function to use default values.
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -ENOMEM: Unable to allocate the transmit ring descriptors.
+ */
+int rte_eth_tx_queue_setup(uint8_t port_id, uint16_t tx_queue_id,
+ uint16_t nb_tx_desc, unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf);
+
+/*
+ * Return the NUMA socket to which an Ethernet device is connected
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @return
+ * The NUMA socket id to which the Ethernet device is connected or
+ * a default of zero if the socket could not be determined.
+ * -1 is returned is the port_id value is out of range.
+ */
+int rte_eth_dev_socket_id(uint8_t port_id);
+
+/*
+ * Check if port_id of device is attached
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @return
+ * - 0 if port is out of range or not attached
+ * - 1 if device is attached
+ */
+int rte_eth_dev_is_valid_port(uint8_t port_id);
+
+/*
+ * Allocate mbuf from mempool, setup the DMA physical address
+ * and then start RX for specified queue of a port. It is used
+ * when rx_deferred_start flag of the specified queue is true.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param rx_queue_id
+ * The index of the rx queue to update the ring.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_rx_queue_start(uint8_t port_id, uint16_t rx_queue_id);
+
+/*
+ * Stop specified RX queue of a port
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param rx_queue_id
+ * The index of the rx queue to update the ring.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_rx_queue_stop(uint8_t port_id, uint16_t rx_queue_id);
+
+/*
+ * Start TX for specified queue of a port. It is used when tx_deferred_start
+ * flag of the specified queue is true.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param tx_queue_id
+ * The index of the tx queue to update the ring.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_tx_queue_start(uint8_t port_id, uint16_t tx_queue_id);
+
+/*
+ * Stop specified TX queue of a port
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device
+ * @param tx_queue_id
+ * The index of the tx queue to update the ring.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - 0: Success, the transmit queue is correctly set up.
+ * - -EINVAL: The port_id or the queue_id out of range.
+ * - -ENOTSUP: The function not supported in PMD driver.
+ */
+int rte_eth_dev_tx_queue_stop(uint8_t port_id, uint16_t tx_queue_id);
+
+
+
+/**
+ * Start an Ethernet device.
+ *
+ * The device start step is the last one and consists of setting the configured
+ * offload features and in starting the transmit and the receive units of the
+ * device.
+ * On success, all basic functions exported by the Ethernet API (link status,
+ * receive/transmit, and so on) can be invoked.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - 0: Success, Ethernet device started.
+ * - <0: Error code of the driver device start function.
+ */
+int rte_eth_dev_start(uint8_t port_id);
+
+/**
+ * Stop an Ethernet device. The device can be restarted with a call to
+ * rte_eth_dev_start()
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_dev_stop(uint8_t port_id);
+
+
+/**
+ * Link up an Ethernet device.
+ *
+ * Set device link up will re-enable the device rx/tx
+ * functionality after it is previously set device linked down.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - 0: Success, Ethernet device linked up.
+ * - <0: Error code of the driver device link up function.
+ */
+int rte_eth_dev_set_link_up(uint8_t port_id);
+
+/**
+ * Link down an Ethernet device.
+ * The device rx/tx functionality will be disabled if success,
+ * and it can be re-enabled with a call to
+ * rte_eth_dev_set_link_up()
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+int rte_eth_dev_set_link_down(uint8_t port_id);
+
+/**
+ * Close a stopped Ethernet device. The device cannot be restarted!
+ * The function frees all resources except for needed by the
+ * closed state. To free these resources, call rte_eth_dev_detach().
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_dev_close(uint8_t port_id);
+
+/**
+ * Enable receipt in promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_promiscuous_enable(uint8_t port_id);
+
+/**
+ * Disable receipt in promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_promiscuous_disable(uint8_t port_id);
+
+/**
+ * Return the value of promiscuous mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (1) if promiscuous is enabled
+ * - (0) if promiscuous is disabled.
+ * - (-1) on error
+ */
+int rte_eth_promiscuous_get(uint8_t port_id);
+
+/**
+ * Enable the receipt of any multicast frame by an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_allmulticast_enable(uint8_t port_id);
+
+/**
+ * Disable the receipt of all multicast frames by an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_allmulticast_disable(uint8_t port_id);
+
+/**
+ * Return the value of allmulticast mode for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (1) if allmulticast is enabled
+ * - (0) if allmulticast is disabled.
+ * - (-1) on error
+ */
+int rte_eth_allmulticast_get(uint8_t port_id);
+
+/**
+ * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
+ * or FULL-DUPLEX) of the physical link of an Ethernet device. It might need
+ * to wait up to 9 seconds in it.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param link
+ * A pointer to an *rte_eth_link* structure to be filled with
+ * the status, the speed and the mode of the Ethernet device link.
+ */
+void rte_eth_link_get(uint8_t port_id, struct rte_eth_link *link);
+
+/**
+ * Retrieve the status (ON/OFF), the speed (in Mbps) and the mode (HALF-DUPLEX
+ * or FULL-DUPLEX) of the physical link of an Ethernet device. It is a no-wait
+ * version of rte_eth_link_get().
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param link
+ * A pointer to an *rte_eth_link* structure to be filled with
+ * the status, the speed and the mode of the Ethernet device link.
+ */
+void rte_eth_link_get_nowait(uint8_t port_id, struct rte_eth_link *link);
+
+/**
+ * Retrieve the general I/O statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param stats
+ * A pointer to a structure of type *rte_eth_stats* to be filled with
+ * the values of device counters for the following set of statistics:
+ * - *ipackets* with the total of successfully received packets.
+ * - *opackets* with the total of successfully transmitted packets.
+ * - *ibytes* with the total of successfully received bytes.
+ * - *obytes* with the total of successfully transmitted bytes.
+ * - *ierrors* with the total of erroneous received packets.
+ * - *oerrors* with the total of failed transmitted packets.
+ * @return
+ * Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_stats_get(uint8_t port_id, struct rte_eth_stats *stats);
+
+/**
+ * Reset the general I/O statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_stats_reset(uint8_t port_id);
+
+/**
+ * Retrieve extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param xstats
+ * A pointer to a table of structure of type *rte_eth_xstats*
+ * to be filled with device statistics names and values.
+ * This parameter can be set to NULL if n is 0.
+ * @param n
+ * The size of the stats table, which should be large enough to store
+ * all the statistics of the device.
+ * @return
+ * - positive value lower or equal to n: success. The return value
+ * is the number of entries filled in the stats table.
+ * - positive value higher than n: error, the given statistics table
+ * is too small. The return value corresponds to the size that should
+ * be given to succeed. The entries in the table are not valid and
+ * shall not be used by the caller.
+ * - negative value on error (invalid port id)
+ */
+int rte_eth_xstats_get(uint8_t port_id, struct rte_eth_xstats *xstats,
+ unsigned n);
+
+/**
+ * Reset extended statistics of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ */
+void rte_eth_xstats_reset(uint8_t port_id);
+
+/**
+ * Set a mapping for the specified transmit queue to the specified per-queue
+ * statistics counter.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tx_queue_id
+ * The index of the transmit queue for which a queue stats mapping is required.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param stat_idx
+ * The per-queue packet statistics functionality number that the transmit
+ * queue is to be assigned.
+ * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
+ * @return
+ * Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_dev_set_tx_queue_stats_mapping(uint8_t port_id,
+ uint16_t tx_queue_id, uint8_t stat_idx);
+
+/**
+ * Set a mapping for the specified receive queue to the specified per-queue
+ * statistics counter.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ * The index of the receive queue for which a queue stats mapping is required.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param stat_idx
+ * The per-queue packet statistics functionality number that the receive
+ * queue is to be assigned.
+ * The value must be in the range [0, RTE_MAX_ETHPORT_QUEUE_STATS_MAPS - 1].
+ * @return
+ * Zero if successful. Non-zero otherwise.
+ */
+int rte_eth_dev_set_rx_queue_stats_mapping(uint8_t port_id,
+ uint16_t rx_queue_id,
+ uint8_t stat_idx);
+
+/**
+ * Retrieve the Ethernet address of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * A pointer to a structure of type *ether_addr* to be filled with
+ * the Ethernet address of the Ethernet device.
+ */
+void rte_eth_macaddr_get(uint8_t port_id, struct ether_addr *mac_addr);
+
+/**
+ * Retrieve the contextual information of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param dev_info
+ * A pointer to a structure of type *rte_eth_dev_info* to be filled with
+ * the contextual information of the Ethernet device.
+ */
+void rte_eth_dev_info_get(uint8_t port_id, struct rte_eth_dev_info *dev_info);
+
+/**
+ * Retrieve the supported packet types of an Ethernet device.
+ *
+ * @note
+ * Better to invoke this API after the device is already started or rx burst
+ * function is decided, to obtain correct supported ptypes.
+ * @note
+ * if a given PMD does not report what ptypes it supports, then the supported
+ * ptype count is reported as 0.
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param ptype_mask
+ * A hint of what kind of packet type which the caller is interested in.
+ * @param ptypes
+ * An array pointer to store adequent packet types, allocated by caller.
+ * @param num
+ * Size of the array pointed by param ptypes.
+ * @return
+ * - (>=0) Number of supported ptypes. If the number of types exceeds num,
+ * only num entries will be filled into the ptypes array, but the full
+ * count of supported ptypes will be returned.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_supported_ptypes(uint8_t port_id, uint32_t ptype_mask,
+ uint32_t *ptypes, int num);
+
+/**
+ * Retrieve the MTU of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mtu
+ * A pointer to a uint16_t where the retrieved MTU is to be stored.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_mtu(uint8_t port_id, uint16_t *mtu);
+
+/**
+ * Change the MTU of an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mtu
+ * A uint16_t for the MTU to be applied.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if operation is not supported.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *mtu* invalid.
+ */
+int rte_eth_dev_set_mtu(uint8_t port_id, uint16_t mtu);
+
+/**
+ * Enable/Disable hardware filtering by an Ethernet device of received
+ * VLAN packets tagged with a given VLAN Tag Identifier.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param vlan_id
+ * The VLAN Tag Identifier whose filtering must be enabled or disabled.
+ * @param on
+ * If > 0, enable VLAN filtering of VLAN packets tagged with *vlan_id*.
+ * Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*.
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-ENOSYS) if VLAN filtering on *port_id* disabled.
+ * - (-EINVAL) if *vlan_id* > 4095.
+ */
+int rte_eth_dev_vlan_filter(uint8_t port_id, uint16_t vlan_id, int on);
+
+/**
+ * Enable/Disable hardware VLAN Strip by a rx queue of an Ethernet device.
+ * 82599/X540/X550 can support VLAN stripping at the rx queue level
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rx_queue_id
+ * The index of the receive queue for which a queue stats mapping is required.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param on
+ * If 1, Enable VLAN Stripping of the receive queue of the Ethernet port.
+ * If 0, Disable VLAN Stripping of the receive queue of the Ethernet port.
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN stripping not configured.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if *rx_queue_id* invalid.
+ */
+int rte_eth_dev_set_vlan_strip_on_queue(uint8_t port_id, uint16_t rx_queue_id,
+ int on);
+
+/**
+ * Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to
+ * the VLAN Header. This is a register setup available on some Intel NIC, not
+ * but all, please check the data sheet for availability.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param vlan_type
+ * The vlan type.
+ * @param tag_type
+ * The Tag Protocol ID
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN TPID setup is not supported.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_set_vlan_ether_type(uint8_t port_id,
+ enum rte_vlan_type vlan_type,
+ uint16_t tag_type);
+
+/**
+ * Set VLAN offload configuration on an Ethernet device
+ * Enable/Disable Extended VLAN by an Ethernet device, This is a register setup
+ * available on some Intel NIC, not but all, please check the data sheet for
+ * availability.
+ * Enable/Disable VLAN Strip can be done on rx queue for certain NIC, but here
+ * the configuration is applied on the port level.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param offload_mask
+ * The VLAN Offload bit mask can be mixed use with "OR"
+ * ETH_VLAN_STRIP_OFFLOAD
+ * ETH_VLAN_FILTER_OFFLOAD
+ * ETH_VLAN_EXTEND_OFFLOAD
+ * @return
+ * - (0) if successful.
+ * - (-ENOSUP) if hardware-assisted VLAN filtering not configured.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_set_vlan_offload(uint8_t port_id, int offload_mask);
+
+/**
+ * Read VLAN Offload configuration from an Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (>0) if successful. Bit mask to indicate
+ * ETH_VLAN_STRIP_OFFLOAD
+ * ETH_VLAN_FILTER_OFFLOAD
+ * ETH_VLAN_EXTEND_OFFLOAD
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_get_vlan_offload(uint8_t port_id);
+
+/**
+ * Set port based TX VLAN insersion on or off.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param pvid
+ * Port based TX VLAN identifier togeth with user priority.
+ * @param on
+ * Turn on or off the port based TX VLAN insertion.
+ *
+ * @return
+ * - (0) if successful.
+ * - negative if failed.
+ */
+int rte_eth_dev_set_vlan_pvid(uint8_t port_id, uint16_t pvid, int on);
+
+/**
+ *
+ * Retrieve a burst of input packets from a receive queue of an Ethernet
+ * device. The retrieved packets are stored in *rte_mbuf* structures whose
+ * pointers are supplied in the *rx_pkts* array.
+ *
+ * The rte_eth_rx_burst() function loops, parsing the RX ring of the
+ * receive queue, up to *nb_pkts* packets, and for each completed RX
+ * descriptor in the ring, it performs the following operations:
+ *
+ * - Initialize the *rte_mbuf* data structure associated with the
+ * RX descriptor according to the information provided by the NIC into
+ * that RX descriptor.
+ *
+ * - Store the *rte_mbuf* data structure into the next entry of the
+ * *rx_pkts* array.
+ *
+ * - Replenish the RX descriptor with a new *rte_mbuf* buffer
+ * allocated from the memory pool associated with the receive queue at
+ * initialization time.
+ *
+ * When retrieving an input packet that was scattered by the controller
+ * into multiple receive descriptors, the rte_eth_rx_burst() function
+ * appends the associated *rte_mbuf* buffers to the first buffer of the
+ * packet.
+ *
+ * The rte_eth_rx_burst() function returns the number of packets
+ * actually retrieved, which is the number of *rte_mbuf* data structures
+ * effectively supplied into the *rx_pkts* array.
+ * A return value equal to *nb_pkts* indicates that the RX queue contained
+ * at least *rx_pkts* packets, and this is likely to signify that other
+ * received packets remain in the input queue. Applications implementing
+ * a "retrieve as much received packets as possible" policy can check this
+ * specific case and keep invoking the rte_eth_rx_burst() function until
+ * a value less than *nb_pkts* is returned.
+ *
+ * This receive method has the following advantages:
+ *
+ * - It allows a run-to-completion network stack engine to retrieve and
+ * to immediately process received packets in a fast burst-oriented
+ * approach, avoiding the overhead of unnecessary intermediate packet
+ * queue/dequeue operations.
+ *
+ * - Conversely, it also allows an asynchronous-oriented processing
+ * method to retrieve bursts of received packets and to immediately
+ * queue them for further parallel processing by another logical core,
+ * for instance. However, instead of having received packets being
+ * individually queued by the driver, this approach allows the invoker
+ * of the rte_eth_rx_burst() function to queue a burst of retrieved
+ * packets at a time and therefore dramatically reduce the cost of
+ * enqueue/dequeue operations per packet.
+ *
+ * - It allows the rte_eth_rx_burst() function of the driver to take
+ * advantage of burst-oriented hardware features (CPU cache,
+ * prefetch instructions, and so on) to minimize the number of CPU
+ * cycles per packet.
+ *
+ * To summarize, the proposed receive API enables many
+ * burst-oriented optimizations in both synchronous and asynchronous
+ * packet processing environments with no overhead in both cases.
+ *
+ * The rte_eth_rx_burst() function does not provide any error
+ * notification to avoid the corresponding overhead. As a hint, the
+ * upper-level application might check the status of the device link once
+ * being systematically returned a 0 value for a given number of tries.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param rx_pkts
+ * The address of an array of pointers to *rte_mbuf* structures that
+ * must be large enough to store *nb_pkts* pointers in it.
+ * @param nb_pkts
+ * The maximum number of packets to retrieve.
+ * @return
+ * The number of packets actually retrieved, which is the number
+ * of pointers to *rte_mbuf* structures effectively supplied to the
+ * *rx_pkts* array.
+ */
+static inline uint16_t
+rte_eth_rx_burst(uint8_t port_id, uint16_t queue_id,
+ struct rte_mbuf **rx_pkts, const uint16_t nb_pkts)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->rx_pkt_burst, 0);
+
+ if (queue_id >= dev->data->nb_rx_queues) {
+ RTE_PMD_DEBUG_TRACE("Invalid RX queue_id=%d\n", queue_id);
+ return 0;
+ }
+#endif
+ int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
+ rx_pkts, nb_pkts);
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+ struct rte_eth_rxtx_callback *cb = dev->post_rx_burst_cbs[queue_id];
+
+ if (unlikely(cb != NULL)) {
+ do {
+ nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
+ nb_pkts, cb->param);
+ cb = cb->next;
+ } while (cb != NULL);
+ }
+#endif
+
+ return nb_rx;
+}
+
+/**
+ * Get the number of used descriptors in a specific queue
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue id on the specific port.
+ * @return
+ * The number of used descriptors in the specific queue, or:
+ * (-EINVAL) if *port_id* is invalid
+ * (-ENOTSUP) if the device does not support this function
+ */
+static inline int
+rte_eth_rx_queue_count(uint8_t port_id, uint16_t queue_id)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -EINVAL);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_queue_count, -ENOTSUP);
+ return (*dev->dev_ops->rx_queue_count)(dev, queue_id);
+}
+
+/**
+ * Check if the DD bit of the specific RX descriptor in the queue has been set
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue id on the specific port.
+ * @param offset
+ * The offset of the descriptor ID from tail.
+ * @return
+ * - (1) if the specific DD bit is set.
+ * - (0) if the specific DD bit is not set.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-ENOTSUP) if the device does not support this function
+ */
+static inline int
+rte_eth_rx_descriptor_done(uint8_t port_id, uint16_t queue_id, uint16_t offset)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->rx_descriptor_done, -ENOTSUP);
+ return (*dev->dev_ops->rx_descriptor_done)( \
+ dev->data->rx_queues[queue_id], offset);
+}
+
+/**
+ * Send a burst of output packets on a transmit queue of an Ethernet device.
+ *
+ * The rte_eth_tx_burst() function is invoked to transmit output packets
+ * on the output queue *queue_id* of the Ethernet device designated by its
+ * *port_id*.
+ * The *nb_pkts* parameter is the number of packets to send which are
+ * supplied in the *tx_pkts* array of *rte_mbuf* structures.
+ * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets,
+ * up to the number of transmit descriptors available in the TX ring of the
+ * transmit queue.
+ * For each packet to send, the rte_eth_tx_burst() function performs
+ * the following operations:
+ *
+ * - Pick up the next available descriptor in the transmit ring.
+ *
+ * - Free the network buffer previously sent with that descriptor, if any.
+ *
+ * - Initialize the transmit descriptor with the information provided
+ * in the *rte_mbuf data structure.
+ *
+ * In the case of a segmented packet composed of a list of *rte_mbuf* buffers,
+ * the rte_eth_tx_burst() function uses several transmit descriptors
+ * of the ring.
+ *
+ * The rte_eth_tx_burst() function returns the number of packets it
+ * actually sent. A return value equal to *nb_pkts* means that all packets
+ * have been sent, and this is likely to signify that other output packets
+ * could be immediately transmitted again. Applications that implement a
+ * "send as many packets to transmit as possible" policy can check this
+ * specific case and keep invoking the rte_eth_tx_burst() function until
+ * a value less than *nb_pkts* is returned.
+ *
+ * It is the responsibility of the rte_eth_tx_burst() function to
+ * transparently free the memory buffers of packets previously sent.
+ * This feature is driven by the *tx_free_thresh* value supplied to the
+ * rte_eth_dev_configure() function at device configuration time.
+ * When the number of free TX descriptors drops below this threshold, the
+ * rte_eth_tx_burst() function must [attempt to] free the *rte_mbuf* buffers
+ * of those packets whose transmission was effectively completed.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param tx_pkts
+ * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures
+ * which contain the output packets.
+ * @param nb_pkts
+ * The maximum number of packets to transmit.
+ * @return
+ * The number of output packets actually stored in transmit descriptors of
+ * the transmit ring. The return value can be less than the value of the
+ * *tx_pkts* parameter when the transmit ring is full or has been filled up.
+ */
+static inline uint16_t
+rte_eth_tx_burst(uint8_t port_id, uint16_t queue_id,
+ struct rte_mbuf **tx_pkts, uint16_t nb_pkts)
+{
+ struct rte_eth_dev *dev = &rte_eth_devices[port_id];
+
+#ifdef RTE_LIBRTE_ETHDEV_DEBUG
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0);
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->tx_pkt_burst, 0);
+
+ if (queue_id >= dev->data->nb_tx_queues) {
+ RTE_PMD_DEBUG_TRACE("Invalid TX queue_id=%d\n", queue_id);
+ return 0;
+ }
+#endif
+
+#ifdef RTE_ETHDEV_RXTX_CALLBACKS
+ struct rte_eth_rxtx_callback *cb = dev->pre_tx_burst_cbs[queue_id];
+
+ if (unlikely(cb != NULL)) {
+ do {
+ nb_pkts = cb->fn.tx(port_id, queue_id, tx_pkts, nb_pkts,
+ cb->param);
+ cb = cb->next;
+ } while (cb != NULL);
+ }
+#endif
+
+ return (*dev->tx_pkt_burst)(dev->data->tx_queues[queue_id], tx_pkts, nb_pkts);
+}
+
+typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count,
+ void *userdata);
+
+/**
+ * Structure used to buffer packets for future TX
+ * Used by APIs rte_eth_tx_buffer and rte_eth_tx_buffer_flush
+ */
+struct rte_eth_dev_tx_buffer {
+ buffer_tx_error_fn error_callback;
+ void *error_userdata;
+ uint16_t size; /**< Size of buffer for buffered tx */
+ uint16_t length; /**< Number of packets in the array */
+ struct rte_mbuf *pkts[];
+ /**< Pending packets to be sent on explicit flush or when full */
+};
+
+/**
+ * Calculate the size of the tx buffer.
+ *
+ * @param sz
+ * Number of stored packets.
+ */
+#define RTE_ETH_TX_BUFFER_SIZE(sz) \
+ (sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *))
+
+/**
+ * Initialize default values for buffered transmitting
+ *
+ * @param buffer
+ * Tx buffer to be initialized.
+ * @param size
+ * Buffer size
+ * @return
+ * 0 if no error
+ */
+int
+rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size);
+
+/**
+ * Send any packets queued up for transmission on a port and HW queue
+ *
+ * This causes an explicit flush of packets previously buffered via the
+ * rte_eth_tx_buffer() function. It returns the number of packets successfully
+ * sent to the NIC, and calls the error callback for any unsent packets. Unless
+ * explicitly set up otherwise, the default callback simply frees the unsent
+ * packets back to the owning mempool.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param buffer
+ * Buffer of packets to be transmit.
+ * @return
+ * The number of packets successfully sent to the Ethernet device. The error
+ * callback is called for any packets which could not be sent.
+ */
+static inline uint16_t
+rte_eth_tx_buffer_flush(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_dev_tx_buffer *buffer)
+{
+ uint16_t sent;
+ uint16_t to_send = buffer->length;
+
+ if (to_send == 0)
+ return 0;
+
+ sent = rte_eth_tx_burst(port_id, queue_id, buffer->pkts, to_send);
+
+ buffer->length = 0;
+
+ /* All packets sent, or to be dealt with by callback below */
+ if (unlikely(sent != to_send))
+ buffer->error_callback(&buffer->pkts[sent], to_send - sent,
+ buffer->error_userdata);
+
+ return sent;
+}
+
+/**
+ * Buffer a single packet for future transmission on a port and queue
+ *
+ * This function takes a single mbuf/packet and buffers it for later
+ * transmission on the particular port and queue specified. Once the buffer is
+ * full of packets, an attempt will be made to transmit all the buffered
+ * packets. In case of error, where not all packets can be transmitted, a
+ * callback is called with the unsent packets as a parameter. If no callback
+ * is explicitly set up, the unsent packets are just freed back to the owning
+ * mempool. The function returns the number of packets actually sent i.e.
+ * 0 if no buffer flush occurred, otherwise the number of packets successfully
+ * flushed
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the transmit queue through which output packets must be
+ * sent.
+ * The value must be in the range [0, nb_tx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param buffer
+ * Buffer used to collect packets to be sent.
+ * @param tx_pkt
+ * Pointer to the packet mbuf to be sent.
+ * @return
+ * 0 = packet has been buffered for later transmission
+ * N > 0 = packet has been buffered, and the buffer was subsequently flushed,
+ * causing N packets to be sent, and the error callback to be called for
+ * the rest.
+ */
+static inline uint16_t __attribute__((always_inline))
+rte_eth_tx_buffer(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt)
+{
+ buffer->pkts[buffer->length++] = tx_pkt;
+ if (buffer->length < buffer->size)
+ return 0;
+
+ return rte_eth_tx_buffer_flush(port_id, queue_id, buffer);
+}
+
+/**
+ * Configure a callback for buffered packets which cannot be sent
+ *
+ * Register a specific callback to be called when an attempt is made to send
+ * all packets buffered on an ethernet port, but not all packets can
+ * successfully be sent. The callback registered here will be called only
+ * from calls to rte_eth_tx_buffer() and rte_eth_tx_buffer_flush() APIs.
+ * The default callback configured for each queue by default just frees the
+ * packets back to the calling mempool. If additional behaviour is required,
+ * for example, to count dropped packets, or to retry transmission of packets
+ * which cannot be sent, this function should be used to register a suitable
+ * callback function to implement the desired behaviour.
+ * The example callback "rte_eth_count_unsent_packet_callback()" is also
+ * provided as reference.
+ *
+ * @param buffer
+ * The port identifier of the Ethernet device.
+ * @param callback
+ * The function to be used as the callback.
+ * @param userdata
+ * Arbitrary parameter to be passed to the callback function
+ * @return
+ * 0 on success, or -1 on error with rte_errno set appropriately
+ */
+int
+rte_eth_tx_buffer_set_err_callback(struct rte_eth_dev_tx_buffer *buffer,
+ buffer_tx_error_fn callback, void *userdata);
+
+/**
+ * Callback function for silently dropping unsent buffered packets.
+ *
+ * This function can be passed to rte_eth_tx_buffer_set_err_callback() to
+ * adjust the default behavior when buffered packets cannot be sent. This
+ * function drops any unsent packets silently and is used by tx buffered
+ * operations as default behavior.
+ *
+ * NOTE: this function should not be called directly, instead it should be used
+ * as a callback for packet buffering.
+ *
+ * NOTE: when configuring this function as a callback with
+ * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter
+ * should point to an uint64_t value.
+ *
+ * @param pkts
+ * The previously buffered packets which could not be sent
+ * @param unsent
+ * The number of unsent packets in the pkts array
+ * @param userdata
+ * Not used
+ */
+void
+rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent,
+ void *userdata);
+
+/**
+ * Callback function for tracking unsent buffered packets.
+ *
+ * This function can be passed to rte_eth_tx_buffer_set_err_callback() to
+ * adjust the default behavior when buffered packets cannot be sent. This
+ * function drops any unsent packets, but also updates a user-supplied counter
+ * to track the overall number of packets dropped. The counter should be an
+ * uint64_t variable.
+ *
+ * NOTE: this function should not be called directly, instead it should be used
+ * as a callback for packet buffering.
+ *
+ * NOTE: when configuring this function as a callback with
+ * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter
+ * should point to an uint64_t value.
+ *
+ * @param pkts
+ * The previously buffered packets which could not be sent
+ * @param unsent
+ * The number of unsent packets in the pkts array
+ * @param userdata
+ * Pointer to an uint64_t value, which will be incremented by unsent
+ */
+void
+rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent,
+ void *userdata);
+
+/**
+ * The eth device event type for interrupt, and maybe others in the future.
+ */
+enum rte_eth_event_type {
+ RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */
+ RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */
+ RTE_ETH_EVENT_QUEUE_STATE,
+ /**< queue state event (enabled/disabled) */
+ RTE_ETH_EVENT_INTR_RESET,
+ /**< reset interrupt event, sent to VF on PF reset */
+ RTE_ETH_EVENT_MAX /**< max value of this enum */
+};
+
+typedef void (*rte_eth_dev_cb_fn)(uint8_t port_id, \
+ enum rte_eth_event_type event, void *cb_arg);
+/**< user application callback to be registered for interrupts */
+
+
+
+/**
+ * Register a callback function for specific port id.
+ *
+ * @param port_id
+ * Port id.
+ * @param event
+ * Event interested.
+ * @param cb_fn
+ * User supplied callback function to be called.
+ * @param cb_arg
+ * Pointer to the parameters for the registered callback.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_callback_register(uint8_t port_id,
+ enum rte_eth_event_type event,
+ rte_eth_dev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * Unregister a callback function for specific port id.
+ *
+ * @param port_id
+ * Port id.
+ * @param event
+ * Event interested.
+ * @param cb_fn
+ * User supplied callback function to be called.
+ * @param cb_arg
+ * Pointer to the parameters for the registered callback. -1 means to
+ * remove all for the same callback address and same event.
+ *
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_callback_unregister(uint8_t port_id,
+ enum rte_eth_event_type event,
+ rte_eth_dev_cb_fn cb_fn, void *cb_arg);
+
+/**
+ * @internal Executes all the user application registered callbacks for
+ * the specific device. It is for DPDK internal user only. User
+ * application should not call it directly.
+ *
+ * @param dev
+ * Pointer to struct rte_eth_dev.
+ * @param event
+ * Eth device interrupt event type.
+ *
+ * @return
+ * void
+ */
+void _rte_eth_dev_callback_process(struct rte_eth_dev *dev,
+ enum rte_eth_event_type event);
+
+/**
+ * When there is no rx packet coming in Rx Queue for a long time, we can
+ * sleep lcore related to RX Queue for power saving, and enable rx interrupt
+ * to be triggered when rx packect arrives.
+ *
+ * The rte_eth_dev_rx_intr_enable() function enables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_enable(uint8_t port_id, uint16_t queue_id);
+
+/**
+ * When lcore wakes up from rx interrupt indicating packet coming, disable rx
+ * interrupt and returns to polling mode.
+ *
+ * The rte_eth_dev_rx_intr_disable() function disables rx queue
+ * interrupt on specific rx queue of a port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_rx_intr_disable(uint8_t port_id, uint16_t queue_id);
+
+/**
+ * RX Interrupt control per port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param epfd
+ * Epoll instance fd which the intr vector associated to.
+ * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ * The operation be performed for the vector.
+ * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ * User raw data.
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl(uint8_t port_id, int epfd, int op, void *data);
+
+/**
+ * RX Interrupt control per queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The index of the receive queue from which to retrieve input packets.
+ * The value must be in the range [0, nb_rx_queue - 1] previously supplied
+ * to rte_eth_dev_configure().
+ * @param epfd
+ * Epoll instance fd which the intr vector associated to.
+ * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance.
+ * @param op
+ * The operation be performed for the vector.
+ * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}.
+ * @param data
+ * User raw data.
+ * @return
+ * - On success, zero.
+ * - On failure, a negative value.
+ */
+int rte_eth_dev_rx_intr_ctl_q(uint8_t port_id, uint16_t queue_id,
+ int epfd, int op, void *data);
+
+/**
+ * Turn on the LED on the Ethernet device.
+ * This function turns on the LED on the Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_led_on(uint8_t port_id);
+
+/**
+ * Turn off the LED on the Ethernet device.
+ * This function turns off the LED on the Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if underlying hardware OR driver doesn't support
+ * that operation.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_led_off(uint8_t port_id);
+
+/**
+ * Get current status of the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param fc_conf
+ * The pointer to the structure where to store the flow control parameters.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flow control.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_flow_ctrl_get(uint8_t port_id,
+ struct rte_eth_fc_conf *fc_conf);
+
+/**
+ * Configure the Ethernet link flow control for Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param fc_conf
+ * The pointer to the structure of the flow control parameters.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flow control mode.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter
+ * - (-EIO) if flow control setup failure
+ */
+int rte_eth_dev_flow_ctrl_set(uint8_t port_id,
+ struct rte_eth_fc_conf *fc_conf);
+
+/**
+ * Configure the Ethernet priority flow control under DCB environment
+ * for Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param pfc_conf
+ * The pointer to the structure of the priority flow control parameters.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support priority flow control mode.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter
+ * - (-EIO) if flow control setup failure
+ */
+int rte_eth_dev_priority_flow_ctrl_set(uint8_t port_id,
+ struct rte_eth_pfc_conf *pfc_conf);
+
+/**
+ * Add a MAC address to an internal array of addresses used to enable whitelist
+ * filtering to accept packets only if the destination MAC address matches.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * The MAC address to add.
+ * @param pool
+ * VMDq pool index to associate address with (if VMDq is enabled). If VMDq is
+ * not enabled, this should be set to 0.
+ * @return
+ * - (0) if successfully added or *mac_addr" was already added.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port* is invalid.
+ * - (-ENOSPC) if no more MAC addresses can be added.
+ * - (-EINVAL) if MAC address is invalid.
+ */
+int rte_eth_dev_mac_addr_add(uint8_t port, struct ether_addr *mac_addr,
+ uint32_t pool);
+
+/**
+ * Remove a MAC address from the internal array of addresses.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * MAC address to remove.
+ * @return
+ * - (0) if successful, or *mac_addr* didn't exist.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EADDRINUSE) if attempting to remove the default MAC address
+ */
+int rte_eth_dev_mac_addr_remove(uint8_t port, struct ether_addr *mac_addr);
+
+/**
+ * Set the default MAC address.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param mac_addr
+ * New default MAC address.
+ * @return
+ * - (0) if successful, or *mac_addr* didn't exist.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port* invalid.
+ * - (-EINVAL) if MAC address is invalid.
+ */
+int rte_eth_dev_default_mac_addr_set(uint8_t port, struct ether_addr *mac_addr);
+
+
+/**
+ * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param reta_conf
+ * RETA to update.
+ * @param reta_size
+ * Redirection table size. The table size can be queried by
+ * rte_eth_dev_info_get().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_rss_reta_update(uint8_t port,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
+
+ /**
+ * Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param reta_conf
+ * RETA to query.
+ * @param reta_size
+ * Redirection table size. The table size can be queried by
+ * rte_eth_dev_info_get().
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_rss_reta_query(uint8_t port,
+ struct rte_eth_rss_reta_entry64 *reta_conf,
+ uint16_t reta_size);
+
+ /**
+ * Updates unicast hash table for receiving packet with the given destination
+ * MAC address, and the packet is routed to all VFs for which the RX mode is
+ * accept packets that match the unicast hash table.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param addr
+ * Unicast MAC address.
+ * @param on
+ * 1 - Set an unicast hash bit for receiving packets with the MAC address.
+ * 0 - Clear an unicast hash bit.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_uc_hash_table_set(uint8_t port,struct ether_addr *addr,
+ uint8_t on);
+
+ /**
+ * Updates all unicast hash bitmaps for receiving packet with any Unicast
+ * Ethernet MAC addresses,the packet is routed to all VFs for which the RX
+ * mode is accept packets that match the unicast hash table.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param on
+ * 1 - Set all unicast hash bitmaps for receiving all the Ethernet
+ * MAC addresses
+ * 0 - Clear all unicast hash bitmaps
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_uc_all_hash_table_set(uint8_t port,uint8_t on);
+
+ /**
+ * Set RX L2 Filtering mode of a VF of an Ethernet device.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param rx_mode
+ * The RX mode mask, which is one or more of accepting Untagged Packets,
+ * packets that match the PFUTA table, Broadcast and Multicast Promiscuous.
+ * ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC,
+ * ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used
+ * in rx_mode.
+ * @param on
+ * 1 - Enable a VF RX mode.
+ * 0 - Disable a VF RX mode.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mode,
+ uint8_t on);
+
+/**
+* Enable or disable a VF traffic transmit of the Ethernet device.
+*
+* @param port
+* The port identifier of the Ethernet device.
+* @param vf
+* VF id.
+* @param on
+* 1 - Enable a VF traffic transmit.
+* 0 - Disable a VF traffic transmit.
+* @return
+* - (0) if successful.
+* - (-ENODEV) if *port_id* invalid.
+* - (-ENOTSUP) if hardware doesn't support.
+* - (-EINVAL) if bad parameter.
+*/
+int
+rte_eth_dev_set_vf_tx(uint8_t port,uint16_t vf, uint8_t on);
+
+/**
+* Enable or disable a VF traffic receive of an Ethernet device.
+*
+* @param port
+* The port identifier of the Ethernet device.
+* @param vf
+* VF id.
+* @param on
+* 1 - Enable a VF traffic receive.
+* 0 - Disable a VF traffic receive.
+* @return
+* - (0) if successful.
+* - (-ENOTSUP) if hardware doesn't support.
+* - (-ENODEV) if *port_id* invalid.
+* - (-EINVAL) if bad parameter.
+*/
+int
+rte_eth_dev_set_vf_rx(uint8_t port,uint16_t vf, uint8_t on);
+
+/**
+* Enable/Disable hardware VF VLAN filtering by an Ethernet device of
+* received VLAN packets tagged with a given VLAN Tag Identifier.
+*
+* @param port id
+* The port identifier of the Ethernet device.
+* @param vlan_id
+* The VLAN Tag Identifier whose filtering must be enabled or disabled.
+* @param vf_mask
+* Bitmap listing which VFs participate in the VLAN filtering.
+* @param vlan_on
+* 1 - Enable VFs VLAN filtering.
+* 0 - Disable VFs VLAN filtering.
+* @return
+* - (0) if successful.
+* - (-ENOTSUP) if hardware doesn't support.
+* - (-ENODEV) if *port_id* invalid.
+* - (-EINVAL) if bad parameter.
+*/
+int
+rte_eth_dev_set_vf_vlan_filter(uint8_t port, uint16_t vlan_id,
+ uint64_t vf_mask,
+ uint8_t vlan_on);
+
+/**
+ * Set a traffic mirroring rule on an Ethernet device
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mirror_conf
+ * The pointer to the traffic mirroring structure describing the mirroring rule.
+ * The *rte_eth_vm_mirror_conf* structure includes the type of mirroring rule,
+ * destination pool and the value of rule if enable vlan or pool mirroring.
+ *
+ * @param rule_id
+ * The index of traffic mirroring rule, we support four separated rules.
+ * @param on
+ * 1 - Enable a mirroring rule.
+ * 0 - Disable a mirroring rule.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the mr_conf information is not correct.
+ */
+int rte_eth_mirror_rule_set(uint8_t port_id,
+ struct rte_eth_mirror_conf *mirror_conf,
+ uint8_t rule_id,
+ uint8_t on);
+
+/**
+ * Reset a traffic mirroring rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rule_id
+ * The index of traffic mirroring rule, we support four separated rules.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_mirror_rule_reset(uint8_t port_id,
+ uint8_t rule_id);
+
+/**
+ * Set the rate limitation for a queue on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_idx
+ * The queue id.
+ * @param tx_rate
+ * The tx rate in Mbps. Allocated from the total port link speed.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_set_queue_rate_limit(uint8_t port_id, uint16_t queue_idx,
+ uint16_t tx_rate);
+
+/**
+ * Set the rate limitation for a vf on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param vf
+ * VF id.
+ * @param tx_rate
+ * The tx rate allocated from the total link speed for this VF id.
+ * @param q_msk
+ * The queue mask which need to set the rate.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this feature.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_set_vf_rate_limit(uint8_t port_id, uint16_t vf,
+ uint16_t tx_rate, uint64_t q_msk);
+
+/**
+ * Initialize bypass logic. This function needs to be called before
+ * executing any other bypass API.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_init(uint8_t port);
+
+/**
+ * Return bypass state.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param state
+ * The return bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_state_show(uint8_t port, uint32_t *state);
+
+/**
+ * Set bypass state
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param new_state
+ * The current bypass state.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_state_set(uint8_t port, uint32_t *new_state);
+
+/**
+ * Return bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The bypass state when given event occurred.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_event_show(uint8_t port, uint32_t event, uint32_t *state);
+
+/**
+ * Set bypass state when given event occurs.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param event
+ * The bypass event
+ * - (1) Main power on (power button is pushed)
+ * - (2) Auxiliary power on (power supply is being plugged)
+ * - (3) Main power off (system shutdown and power supply is left plugged in)
+ * - (4) Auxiliary power off (power supply is being unplugged)
+ * - (5) Display or set the watchdog timer
+ * @param state
+ * The assigned state when given event occurs.
+ * - (1) Normal mode
+ * - (2) Bypass mode
+ * - (3) Isolate mode
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_event_store(uint8_t port, uint32_t event, uint32_t state);
+
+/**
+ * Set bypass watchdog timeout count.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param timeout
+ * The timeout to be set.
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_wd_timeout_store(uint8_t port, uint32_t timeout);
+
+/**
+ * Get bypass firmware version.
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param ver
+ * The firmware version
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_ver_show(uint8_t port, uint32_t *ver);
+
+/**
+ * Return bypass watchdog timeout in seconds
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @param wd_timeout
+ * The return watchdog timeout. "0" represents timer expired
+ * - (0) 0 seconds (timer is off)
+ * - (1) 1.5 seconds
+ * - (2) 2 seconds
+ * - (3) 3 seconds
+ * - (4) 4 seconds
+ * - (5) 8 seconds
+ * - (6) 16 seconds
+ * - (7) 32 seconds
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
+
+/**
+ * Reset bypass watchdog timer
+ *
+ * @param port
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_bypass_wd_reset(uint8_t port);
+
+ /**
+ * Configuration of Receive Side Scaling hash computation of Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rss_conf
+ * The new configuration to use for RSS hash computation on the port.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_rss_hash_update(uint8_t port_id,
+ struct rte_eth_rss_conf *rss_conf);
+
+ /**
+ * Retrieve current configuration of Receive Side Scaling hash computation
+ * of Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rss_conf
+ * Where to store the current RSS hash configuration of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support RSS.
+ */
+int
+rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
+ struct rte_eth_rss_conf *rss_conf);
+
+ /**
+ * Add UDP tunneling port for a specific type of tunnel.
+ * The packets with this UDP port will be identified as this type of tunnel.
+ * Before enabling any offloading function for a tunnel, users can call this API
+ * to change or add more UDP port for the tunnel. So the offloading function
+ * can take effect on the packets with the sepcific UDP port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ * UDP tunneling configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_port_add(uint8_t port_id,
+ struct rte_eth_udp_tunnel *tunnel_udp);
+
+ /**
+ * Delete UDP tunneling port a specific type of tunnel.
+ * The packets with this UDP port will not be identified as this type of tunnel
+ * any more.
+ * Before enabling any offloading function for a tunnel, users can call this API
+ * to delete a UDP port for the tunnel. So the offloading function will not take
+ * effect on the packets with the sepcific UDP port.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ * UDP tunneling configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_port_delete(uint8_t port_id,
+ struct rte_eth_udp_tunnel *tunnel_udp);
+
+/**
+ * Check whether the filter type is supported on an Ethernet device.
+ * All the supported filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * Filter type.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this filter type.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
+
+/**
+ * Take operations to assigned filter type on an Ethernet device.
+ * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * Filter type.
+ * @param filter_op
+ * Type of operation.
+ * @param arg
+ * A pointer to arguments defined specifically for the operation.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg);
+
+/**
+ * Get DCB information on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param dcb_info
+ * dcb information.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support.
+ */
+int rte_eth_dev_get_dcb_info(uint8_t port_id,
+ struct rte_eth_dcb_info *dcb_info);
+
+/**
+ * Add a callback to be called on packet RX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets received on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_rx_callback().
+ *
+ * Multiple functions are called in the order that they are added.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ * The callback function
+ * @param user_param
+ * A generic pointer parameter which will be passed to each invocation of the
+ * callback function on this port and queue.
+ *
+ * @return
+ * NULL on error.
+ * On success, a pointer value which can later be used to remove the callback.
+ */
+void *rte_eth_add_rx_callback(uint8_t port_id, uint16_t queue_id,
+ rte_rx_callback_fn fn, void *user_param);
+
+/**
+ * Add a callback to be called on packet TX on a given port and queue.
+ *
+ * This API configures a function to be called for each burst of
+ * packets sent on a given NIC port queue. The return value is a pointer
+ * that can be used to later remove the callback using
+ * rte_eth_remove_tx_callback().
+ *
+ * Multiple functions are called in the order that they are added.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device on which the callback is to be added.
+ * @param fn
+ * The callback function
+ * @param user_param
+ * A generic pointer parameter which will be passed to each invocation of the
+ * callback function on this port and queue.
+ *
+ * @return
+ * NULL on error.
+ * On success, a pointer value which can later be used to remove the callback.
+ */
+void *rte_eth_add_tx_callback(uint8_t port_id, uint16_t queue_id,
+ rte_tx_callback_fn fn, void *user_param);
+
+/**
+ * Remove an RX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_rx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ * - Immediately - if the port is stopped, or the user knows that no
+ * callbacks are in flight e.g. if called from the thread doing RX/TX
+ * on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ * in-flight callbacks to complete.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ * User supplied callback created via rte_eth_add_rx_callback().
+ *
+ * @return
+ * - 0: Success. Callback was removed.
+ * - -ENOTSUP: Callback support is not available.
+ * - -EINVAL: The port_id or the queue_id is out of range, or the callback
+ * is NULL or not found for the port/queue.
+ */
+int rte_eth_remove_rx_callback(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_rxtx_callback *user_cb);
+
+/**
+ * Remove a TX packet callback from a given port and queue.
+ *
+ * This function is used to removed callbacks that were added to a NIC port
+ * queue using rte_eth_add_tx_callback().
+ *
+ * Note: the callback is removed from the callback list but it isn't freed
+ * since the it may still be in use. The memory for the callback can be
+ * subsequently freed back by the application by calling rte_free():
+ *
+ * - Immediately - if the port is stopped, or the user knows that no
+ * callbacks are in flight e.g. if called from the thread doing RX/TX
+ * on that queue.
+ *
+ * - After a short delay - where the delay is sufficient to allow any
+ * in-flight callbacks to complete.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The queue on the Ethernet device from which the callback is to be removed.
+ * @param user_cb
+ * User supplied callback created via rte_eth_add_tx_callback().
+ *
+ * @return
+ * - 0: Success. Callback was removed.
+ * - -ENOTSUP: Callback support is not available.
+ * - -EINVAL: The port_id or the queue_id is out of range, or the callback
+ * is NULL or not found for the port/queue.
+ */
+int rte_eth_remove_tx_callback(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_rxtx_callback *user_cb);
+
+/**
+ * Retrieve information about given port's RX queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The RX queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param qinfo
+ * A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with
+ * the information of the Ethernet device.
+ *
+ * @return
+ * - 0: Success
+ * - -ENOTSUP: routine is not supported by the device PMD.
+ * - -EINVAL: The port_id or the queue_id is out of range.
+ */
+int rte_eth_rx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_rxq_info *qinfo);
+
+/**
+ * Retrieve information about given port's TX queue.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param queue_id
+ * The TX queue on the Ethernet device for which information
+ * will be retrieved.
+ * @param qinfo
+ * A pointer to a structure of type *rte_eth_txq_info_info* to be filled with
+ * the information of the Ethernet device.
+ *
+ * @return
+ * - 0: Success
+ * - -ENOTSUP: routine is not supported by the device PMD.
+ * - -EINVAL: The port_id or the queue_id is out of range.
+ */
+int rte_eth_tx_queue_info_get(uint8_t port_id, uint16_t queue_id,
+ struct rte_eth_txq_info *qinfo);
+
+/*
+ * Retrieve number of available registers for access
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (>=0) number of registers if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_reg_length(uint8_t port_id);
+
+/**
+ * Retrieve device registers and register attributes
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * The template includes buffer for register data and attribute to be filled.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_reg_info(uint8_t port_id, struct rte_dev_reg_info *info);
+
+/**
+ * Retrieve size of device EEPROM
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (>=0) EEPROM size if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_eeprom_length(uint8_t port_id);
+
+/**
+ * Retrieve EEPROM and EEPROM attribute
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * The template includes buffer for return EEPROM data and
+ * EEPROM attributes to be filled.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_get_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
+
+/**
+ * Program EEPROM with provided data
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param info
+ * The template includes EEPROM data for programming and
+ * EEPROM attributes to be filled
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_set_eeprom(uint8_t port_id, struct rte_dev_eeprom_info *info);
+
+/**
+ * Set the list of multicast addresses to filter on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param mc_addr_set
+ * The array of multicast addresses to set. Equal to NULL when the function
+ * is invoked to flush the set of filtered addresses.
+ * @param nb_mc_addr
+ * The number of multicast addresses in the *mc_addr_set* array. Equal to 0
+ * when the function is invoked to flush the set of filtered addresses.
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering.
+ * - (-ENOSPC) if *port_id* has not enough multicast filtering resources.
+ */
+int rte_eth_dev_set_mc_addr_list(uint8_t port_id,
+ struct ether_addr *mc_addr_set,
+ uint32_t nb_mc_addr);
+
+/**
+ * Enable IEEE1588/802.1AS timestamping for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_enable(uint8_t port_id);
+
+/**
+ * Disable IEEE1588/802.1AS timestamping for an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_disable(uint8_t port_id);
+
+/**
+ * Read an IEEE1588/802.1AS RX timestamp from an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param timestamp
+ * Pointer to the timestamp struct.
+ * @param flags
+ * Device specific flags. Used to pass the RX timesync register index to
+ * i40e. Unused in igb/ixgbe, pass 0 instead.
+ *
+ * @return
+ * - 0: Success.
+ * - -EINVAL: No timestamp is available.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_read_rx_timestamp(uint8_t port_id,
+ struct timespec *timestamp, uint32_t flags);
+
+/**
+ * Read an IEEE1588/802.1AS TX timestamp from an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param timestamp
+ * Pointer to the timestamp struct.
+ *
+ * @return
+ * - 0: Success.
+ * - -EINVAL: No timestamp is available.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_read_tx_timestamp(uint8_t port_id,
+ struct timespec *timestamp);
+
+/**
+ * Adjust the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param delta
+ * The adjustment in nanoseconds.
+ *
+ * @return
+ * - 0: Success.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_adjust_time(uint8_t port_id, int64_t delta);
+
+/**
+ * Read the time from the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param time
+ * Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ * - 0: Success.
+ */
+int rte_eth_timesync_read_time(uint8_t port_id, struct timespec *time);
+
+/**
+ * Set the time of the timesync clock on an Ethernet device.
+ *
+ * This is usually used in conjunction with other Ethdev timesync functions to
+ * synchronize the device time using the IEEE1588/802.1AS protocol.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param time
+ * Pointer to the timespec struct that holds the time.
+ *
+ * @return
+ * - 0: Success.
+ * - -EINVAL: No timestamp is available.
+ * - -ENODEV: The port ID is invalid.
+ * - -ENOTSUP: The function is not supported by the Ethernet driver.
+ */
+int rte_eth_timesync_write_time(uint8_t port_id, const struct timespec *time);
+
+/**
+ * Copy pci device info to the Ethernet device data.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure.
+ * @param pci_dev
+ * The *pci_dev* pointer is the address of the *rte_pci_device* structure.
+ *
+ * @return
+ * - 0 on success, negative on error
+ */
+void rte_eth_copy_pci_info(struct rte_eth_dev *eth_dev,
+ struct rte_pci_device *pci_dev);
+
+/**
+ * Create memzone for HW rings.
+ * malloc can't be used as the physical address is needed.
+ * If the memzone is already created, then this function returns a ptr
+ * to the old one.
+ *
+ * @param eth_dev
+ * The *eth_dev* pointer is the address of the *rte_eth_dev* structure
+ * @param name
+ * The name of the memory zone
+ * @param queue_id
+ * The index of the queue to add to name
+ * @param size
+ * The sizeof of the memory area
+ * @param align
+ * Alignment for resulting memzone. Must be a power of 2.
+ * @param socket_id
+ * The *socket_id* argument is the socket identifier in case of NUMA.
+ */
+const struct rte_memzone *
+rte_eth_dma_zone_reserve(const struct rte_eth_dev *eth_dev, const char *name,
+ uint16_t queue_id, size_t size,
+ unsigned align, int socket_id);
+
+/**
+ * Config l2 tunnel ether type of an Ethernet device for filtering specific
+ * tunnel packets by ether type.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel configuration.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_eth_type_conf(uint8_t port_id,
+ struct rte_eth_l2_tunnel_conf *l2_tunnel);
+
+/**
+ * Enable/disable l2 tunnel offload functions. Include,
+ * 1, The ability of parsing a type of l2 tunnel of an Ethernet device.
+ * Filtering, forwarding and offloading this type of tunnel packets depend on
+ * this ability.
+ * 2, Stripping the l2 tunnel tag.
+ * 3, Insertion of the l2 tunnel tag.
+ * 4, Forwarding the packets based on the l2 tunnel tag.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param l2_tunnel
+ * l2 tunnel parameters.
+ * @param mask
+ * Indicate the offload function.
+ * @param en
+ * Enable or disable this function.
+ *
+ * @return
+ * - (0) if successful.
+ * - (-ENODEV) if port identifier is invalid.
+ * - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_l2_tunnel_offload_set(uint8_t port_id,
+ struct rte_eth_l2_tunnel_conf *l2_tunnel,
+ uint32_t mask,
+ uint8_t en);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETHDEV_H_ */
Code Review / deb_dpdk.git / blobdiff