* See struct rte_flow_item_gre.
*/
RTE_FLOW_ITEM_TYPE_GRE,
+
+ /**
+ * [META]
+ *
+ * Fuzzy pattern match, expect faster than default.
+ *
+ * This is for device that support fuzzy matching option.
+ * Usually a fuzzy matching is fast but the cost is accuracy.
+ *
+ * See struct rte_flow_item_fuzzy.
+ */
+ RTE_FLOW_ITEM_TYPE_FUZZY,
};
/**
struct rte_flow_item_eth {
struct ether_addr dst; /**< Destination MAC. */
struct ether_addr src; /**< Source MAC. */
- uint16_t type; /**< EtherType. */
+ rte_be16_t type; /**< EtherType. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_ETH. */
static const struct rte_flow_item_eth rte_flow_item_eth_mask = {
.dst.addr_bytes = "\xff\xff\xff\xff\xff\xff",
.src.addr_bytes = "\xff\xff\xff\xff\xff\xff",
- .type = 0x0000,
+ .type = RTE_BE16(0x0000),
};
#endif
* RTE_FLOW_ITEM_TYPE_VLAN.
*/
struct rte_flow_item_vlan {
- uint16_t tpid; /**< Tag protocol identifier. */
- uint16_t tci; /**< Tag control information. */
+ rte_be16_t tpid; /**< Tag protocol identifier. */
+ rte_be16_t tci; /**< Tag control information. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_VLAN. */
#ifndef __cplusplus
static const struct rte_flow_item_vlan rte_flow_item_vlan_mask = {
- .tpid = 0x0000,
- .tci = 0xffff,
+ .tpid = RTE_BE16(0x0000),
+ .tci = RTE_BE16(0xffff),
};
#endif
#ifndef __cplusplus
static const struct rte_flow_item_ipv4 rte_flow_item_ipv4_mask = {
.hdr = {
- .src_addr = 0xffffffff,
- .dst_addr = 0xffffffff,
+ .src_addr = RTE_BE32(0xffffffff),
+ .dst_addr = RTE_BE32(0xffffffff),
},
};
#endif
#ifndef __cplusplus
static const struct rte_flow_item_udp rte_flow_item_udp_mask = {
.hdr = {
- .src_port = 0xffff,
- .dst_port = 0xffff,
+ .src_port = RTE_BE16(0xffff),
+ .dst_port = RTE_BE16(0xffff),
},
};
#endif
#ifndef __cplusplus
static const struct rte_flow_item_tcp rte_flow_item_tcp_mask = {
.hdr = {
- .src_port = 0xffff,
- .dst_port = 0xffff,
+ .src_port = RTE_BE16(0xffff),
+ .dst_port = RTE_BE16(0xffff),
},
};
#endif
#ifndef __cplusplus
static const struct rte_flow_item_sctp rte_flow_item_sctp_mask = {
.hdr = {
- .src_port = 0xffff,
- .dst_port = 0xffff,
+ .src_port = RTE_BE16(0xffff),
+ .dst_port = RTE_BE16(0xffff),
},
};
#endif
* Matches a E-tag header.
*/
struct rte_flow_item_e_tag {
- uint16_t tpid; /**< Tag protocol identifier (0x893F). */
+ rte_be16_t tpid; /**< Tag protocol identifier (0x893F). */
/**
* E-Tag control information (E-TCI).
* E-PCP (3b), E-DEI (1b), ingress E-CID base (12b).
*/
- uint16_t epcp_edei_in_ecid_b;
+ rte_be16_t epcp_edei_in_ecid_b;
/** Reserved (2b), GRP (2b), E-CID base (12b). */
- uint16_t rsvd_grp_ecid_b;
+ rte_be16_t rsvd_grp_ecid_b;
uint8_t in_ecid_e; /**< Ingress E-CID ext. */
uint8_t ecid_e; /**< E-CID ext. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_E_TAG. */
#ifndef __cplusplus
static const struct rte_flow_item_e_tag rte_flow_item_e_tag_mask = {
-#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
- .rsvd_grp_ecid_b = 0x3fff,
-#elif RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
- .rsvd_grp_ecid_b = 0xff3f,
-#else
-#error Unsupported endianness.
-#endif
+ .rsvd_grp_ecid_b = RTE_BE16(0x3fff),
};
#endif
*
* c_k_s_rsvd0_ver must have value 0x2000 according to RFC 7637.
*/
- uint16_t c_k_s_rsvd0_ver;
- uint16_t protocol; /**< Protocol type (0x6558). */
+ rte_be16_t c_k_s_rsvd0_ver;
+ rte_be16_t protocol; /**< Protocol type (0x6558). */
uint8_t tni[3]; /**< Virtual subnet ID. */
uint8_t flow_id; /**< Flow ID. */
};
* Checksum (1b), reserved 0 (12b), version (3b).
* Refer to RFC 2784.
*/
- uint16_t c_rsvd0_ver;
- uint16_t protocol; /**< Protocol type. */
+ rte_be16_t c_rsvd0_ver;
+ rte_be16_t protocol; /**< Protocol type. */
};
/** Default mask for RTE_FLOW_ITEM_TYPE_GRE. */
#ifndef __cplusplus
static const struct rte_flow_item_gre rte_flow_item_gre_mask = {
- .protocol = 0xffff,
+ .protocol = RTE_BE16(0xffff),
+};
+#endif
+
+/**
+ * RTE_FLOW_ITEM_TYPE_FUZZY
+ *
+ * Fuzzy pattern match, expect faster than default.
+ *
+ * This is for device that support fuzzy match option.
+ * Usually a fuzzy match is fast but the cost is accuracy.
+ * i.e. Signature Match only match pattern's hash value, but it is
+ * possible two different patterns have the same hash value.
+ *
+ * Matching accuracy level can be configure by threshold.
+ * Driver can divide the range of threshold and map to different
+ * accuracy levels that device support.
+ *
+ * Threshold 0 means perfect match (no fuzziness), while threshold
+ * 0xffffffff means fuzziest match.
+ */
+struct rte_flow_item_fuzzy {
+ uint32_t thresh; /**< Accuracy threshold. */
+};
+
+/** Default mask for RTE_FLOW_ITEM_TYPE_FUZZY. */
+#ifndef __cplusplus
+static const struct rte_flow_item_fuzzy rte_flow_item_fuzzy_mask = {
+ .thresh = 0xffffffff,
};
#endif
void *data,
struct rte_flow_error *error);
+/**
+ * Restrict ingress traffic to the defined flow rules.
+ *
+ * Isolated mode guarantees that all ingress traffic comes from defined flow
+ * rules only (current and future).
+ *
+ * Besides making ingress more deterministic, it allows PMDs to safely reuse
+ * resources otherwise assigned to handle the remaining traffic, such as
+ * global RSS configuration settings, VLAN filters, MAC address entries,
+ * legacy filter API rules and so on in order to expand the set of possible
+ * flow rule types.
+ *
+ * Calling this function as soon as possible after device initialization,
+ * ideally before the first call to rte_eth_dev_configure(), is recommended
+ * to avoid possible failures due to conflicting settings.
+ *
+ * Once effective, leaving isolated mode may not be possible depending on
+ * PMD implementation.
+ *
+ * Additionally, the following functionality has no effect on the underlying
+ * port and may return errors such as ENOTSUP ("not supported"):
+ *
+ * - Toggling promiscuous mode.
+ * - Toggling allmulticast mode.
+ * - Configuring MAC addresses.
+ * - Configuring multicast addresses.
+ * - Configuring VLAN filters.
+ * - Configuring Rx filters through the legacy API (e.g. FDIR).
+ * - Configuring global RSS settings.
+ *
+ * @param port_id
+ * Port identifier of Ethernet device.
+ * @param set
+ * Nonzero to enter isolated mode, attempt to leave it otherwise.
+ * @param[out] error
+ * Perform verbose error reporting if not NULL. PMDs initialize this
+ * structure in case of error only.
+ *
+ * @return
+ * 0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+rte_flow_isolate(uint8_t port_id, int set, struct rte_flow_error *error);
+
+/**
+ * Generic flow representation.
+ *
+ * This form is sufficient to describe an rte_flow independently from any
+ * PMD implementation and allows for replayability and identification.
+ */
+struct rte_flow_desc {
+ size_t size; /**< Allocated space including data[]. */
+ struct rte_flow_attr attr; /**< Attributes. */
+ struct rte_flow_item *items; /**< Items. */
+ struct rte_flow_action *actions; /**< Actions. */
+ uint8_t data[]; /**< Storage for items/actions. */
+};
+
+/**
+ * Copy an rte_flow rule description.
+ *
+ * @param[in] fd
+ * Flow rule description.
+ * @param[in] len
+ * Total size of allocated data for the flow description.
+ * @param[in] attr
+ * Flow rule attributes.
+ * @param[in] items
+ * Pattern specification (list terminated by the END pattern item).
+ * @param[in] actions
+ * Associated actions (list terminated by the END action).
+ *
+ * @return
+ * If len is greater or equal to the size of the flow, the total size of the
+ * flow description and its data.
+ * If len is lower than the size of the flow, the number of bytes that would
+ * have been written to desc had it been sufficient. Nothing is written.
+ */
+size_t
+rte_flow_copy(struct rte_flow_desc *fd, size_t len,
+ const struct rte_flow_attr *attr,
+ const struct rte_flow_item *items,
+ const struct rte_flow_action *actions);
+
#ifdef __cplusplus
}
#endif
Code Review / deb_dpdk.git / blobdiff