* (each worker thread schedules events to its own port) or centralized
* (a dedicated thread schedules to all ports). Distributed software schedulers
* perform the scheduling in rte_event_dequeue_burst(), whereas centralized
- * scheduler logic is located in rte_event_schedule().
+ * scheduler logic need a dedicated service core for scheduling.
* The RTE_EVENT_DEV_CAP_DISTRIBUTED_SCHED capability flag is not set
* indicates the device is centralized and thus needs a dedicated scheduling
- * thread that repeatedly calls rte_event_schedule().
+ * thread that repeatedly calls software specific scheduling function.
*
* An event driven worker thread has following typical workflow on fastpath:
* \code{.c}
* In distributed scheduling mode, event scheduling happens in HW or
* rte_event_dequeue_burst() or the combination of these two.
* If the flag is not set then eventdev is centralized and thus needs a
- * dedicated scheduling thread that repeatedly calls rte_event_schedule().
+ * dedicated service core that acts as a scheduling thread .
*
- * @see rte_event_schedule(), rte_event_dequeue_burst()
+ * @see rte_event_dequeue_burst()
*/
#define RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES (1ULL << 3)
/**< Event device is capable of enqueuing events of any type to any queue.
* If this capability is not set, the queue only supports events of the
- * *RTE_EVENT_QUEUE_CFG_* type that it was created with.
+ * *RTE_SCHED_TYPE_* type that it was created with.
*
- * @see RTE_EVENT_QUEUE_CFG_* values
+ * @see RTE_SCHED_TYPE_* values
*/
#define RTE_EVENT_DEV_CAP_BURST_MODE (1ULL << 4)
/**< Event device is capable of operating in burst mode for enqueue(forward,
int
rte_event_dev_info_get(uint8_t dev_id, struct rte_event_dev_info *dev_info);
+/**
+ * The count of ports.
+ */
+#define RTE_EVENT_DEV_ATTR_PORT_COUNT 0
+/**
+ * The count of queues.
+ */
+#define RTE_EVENT_DEV_ATTR_QUEUE_COUNT 1
+/**
+ * The status of the device, zero for stopped, non-zero for started.
+ */
+#define RTE_EVENT_DEV_ATTR_STARTED 2
+
+/**
+ * Get an attribute from a device.
+ *
+ * @param dev_id Eventdev id
+ * @param attr_id The attribute ID to retrieve
+ * @param[out] attr_value A pointer that will be filled in with the attribute
+ * value if successful.
+ *
+ * @retval 0 Successfully retrieved attribute value
+ * -EINVAL Invalid device or *attr_id* provided, or *attr_value*
+ * is NULL
+ */
+int
+rte_event_dev_attr_get(uint8_t dev_id, uint32_t attr_id,
+ uint32_t *attr_value);
+
+
/* Event device configuration bitmap flags */
#define RTE_EVENT_DEV_CFG_PER_DEQUEUE_TIMEOUT (1ULL << 0)
/**< Override the global *dequeue_timeout_ns* and use per dequeue timeout in ns.
/* Event queue specific APIs */
/* Event queue configuration bitmap flags */
-#define RTE_EVENT_QUEUE_CFG_TYPE_MASK (3ULL << 0)
-/**< Mask for event queue schedule type configuration request */
-#define RTE_EVENT_QUEUE_CFG_ALL_TYPES (0ULL << 0)
+#define RTE_EVENT_QUEUE_CFG_ALL_TYPES (1ULL << 0)
/**< Allow ATOMIC,ORDERED,PARALLEL schedule type enqueue
*
* @see RTE_SCHED_TYPE_ORDERED, RTE_SCHED_TYPE_ATOMIC, RTE_SCHED_TYPE_PARALLEL
* @see rte_event_enqueue_burst()
*/
-#define RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY (1ULL << 0)
-/**< Allow only ATOMIC schedule type enqueue
- *
- * The rte_event_enqueue_burst() result is undefined if the queue configured
- * with ATOMIC only and sched_type != RTE_SCHED_TYPE_ATOMIC
- *
- * @see RTE_SCHED_TYPE_ATOMIC, rte_event_enqueue_burst()
- */
-#define RTE_EVENT_QUEUE_CFG_ORDERED_ONLY (2ULL << 0)
-/**< Allow only ORDERED schedule type enqueue
- *
- * The rte_event_enqueue_burst() result is undefined if the queue configured
- * with ORDERED only and sched_type != RTE_SCHED_TYPE_ORDERED
- *
- * @see RTE_SCHED_TYPE_ORDERED, rte_event_enqueue_burst()
- */
-#define RTE_EVENT_QUEUE_CFG_PARALLEL_ONLY (3ULL << 0)
-/**< Allow only PARALLEL schedule type enqueue
- *
- * The rte_event_enqueue_burst() result is undefined if the queue configured
- * with PARALLEL only and sched_type != RTE_SCHED_TYPE_PARALLEL
- *
- * @see RTE_SCHED_TYPE_PARALLEL, rte_event_enqueue_burst()
- */
-#define RTE_EVENT_QUEUE_CFG_SINGLE_LINK (1ULL << 2)
+#define RTE_EVENT_QUEUE_CFG_SINGLE_LINK (1ULL << 1)
/**< This event queue links only to a single event port.
*
* @see rte_event_port_setup(), rte_event_port_link()
uint32_t nb_atomic_flows;
/**< The maximum number of active flows this queue can track at any
* given time. If the queue is configured for atomic scheduling (by
- * applying the RTE_EVENT_QUEUE_CFG_ALL_TYPES or
- * RTE_EVENT_QUEUE_CFG_ATOMIC_ONLY flags to event_queue_cfg), then the
+ * applying the RTE_EVENT_QUEUE_CFG_ALL_TYPES flag to event_queue_cfg
+ * or RTE_SCHED_TYPE_ATOMIC flag to schedule_type), then the
* value must be in the range of [1, nb_event_queue_flows], which was
* previously provided in rte_event_dev_configure().
*/
* event will be returned from dequeue until one or more entries are
* freed up/released.
* If the queue is configured for ordered scheduling (by applying the
- * RTE_EVENT_QUEUE_CFG_ALL_TYPES or RTE_EVENT_QUEUE_CFG_ORDERED_ONLY
- * flags to event_queue_cfg), then the value must be in the range of
- * [1, nb_event_queue_flows], which was previously supplied to
- * rte_event_dev_configure().
+ * RTE_EVENT_QUEUE_CFG_ALL_TYPES flag to event_queue_cfg or
+ * RTE_SCHED_TYPE_ORDERED flag to schedule_type), then the value must
+ * be in the range of [1, nb_event_queue_flows], which was
+ * previously supplied to rte_event_dev_configure().
+ */
+ uint32_t event_queue_cfg;
+ /**< Queue cfg flags(EVENT_QUEUE_CFG_) */
+ uint8_t schedule_type;
+ /**< Queue schedule type(RTE_SCHED_TYPE_*).
+ * Valid when RTE_EVENT_QUEUE_CFG_ALL_TYPES bit is not set in
+ * event_queue_cfg.
*/
- uint32_t event_queue_cfg; /**< Queue cfg flags(EVENT_QUEUE_CFG_) */
uint8_t priority;
/**< Priority for this event queue relative to other event queues.
* The requested priority should in the range of
const struct rte_event_queue_conf *queue_conf);
/**
- * Get the number of event queues on a specific event device
- *
- * @param dev_id
- * Event device identifier.
- * @return
- * - The number of configured event queues
+ * The priority of the queue.
*/
-uint8_t
-rte_event_queue_count(uint8_t dev_id);
+#define RTE_EVENT_QUEUE_ATTR_PRIORITY 0
+/**
+ * The number of atomic flows configured for the queue.
+ */
+#define RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_FLOWS 1
+/**
+ * The number of atomic order sequences configured for the queue.
+ */
+#define RTE_EVENT_QUEUE_ATTR_NB_ATOMIC_ORDER_SEQUENCES 2
+/**
+ * The cfg flags for the queue.
+ */
+#define RTE_EVENT_QUEUE_ATTR_EVENT_QUEUE_CFG 3
+/**
+ * The schedule type of the queue.
+ */
+#define RTE_EVENT_QUEUE_ATTR_SCHEDULE_TYPE 4
/**
- * Get the priority of the event queue on a specific event device
- *
- * @param dev_id
- * Event device identifier.
- * @param queue_id
- * Event queue identifier.
- * @return
- * - If the device has RTE_EVENT_DEV_CAP_QUEUE_QOS capability then the
- * configured priority of the event queue in
- * [RTE_EVENT_DEV_PRIORITY_HIGHEST, RTE_EVENT_DEV_PRIORITY_LOWEST] range
- * else the value RTE_EVENT_DEV_PRIORITY_NORMAL
+ * Get an attribute from a queue.
+ *
+ * @param dev_id Eventdev id
+ * @param queue_id Eventdev queue id
+ * @param attr_id The attribute ID to retrieve
+ * @param[out] attr_value A pointer that will be filled in with the attribute
+ * value if successful
+ *
+ * @retval 0 Successfully returned value
+ * -EINVAL invalid device, queue or attr_id provided, or attr_value
+ * was NULL
+ * -EOVERFLOW returned when attr_id is set to
+ * RTE_EVENT_QUEUE_ATTR_SCHEDULE_TYPE and event_queue_cfg is set to
+ * RTE_EVENT_QUEUE_CFG_ALL_TYPES
*/
-uint8_t
-rte_event_queue_priority(uint8_t dev_id, uint8_t queue_id);
+int
+rte_event_queue_attr_get(uint8_t dev_id, uint8_t queue_id, uint32_t attr_id,
+ uint32_t *attr_value);
/* Event port specific APIs */
const struct rte_event_port_conf *port_conf);
/**
- * Get the number of dequeue queue depth configured for event port designated
- * by its *port_id* on a specific event device
- *
- * @param dev_id
- * Event device identifier.
- * @param port_id
- * Event port identifier.
- * @return
- * - The number of configured dequeue queue depth
- *
- * @see rte_event_dequeue_burst()
+ * The queue depth of the port on the enqueue side
*/
-uint8_t
-rte_event_port_dequeue_depth(uint8_t dev_id, uint8_t port_id);
-
+#define RTE_EVENT_PORT_ATTR_ENQ_DEPTH 0
/**
- * Get the number of enqueue queue depth configured for event port designated
- * by its *port_id* on a specific event device
- *
- * @param dev_id
- * Event device identifier.
- * @param port_id
- * Event port identifier.
- * @return
- * - The number of configured enqueue queue depth
- *
- * @see rte_event_enqueue_burst()
+ * The queue depth of the port on the dequeue side
*/
-uint8_t
-rte_event_port_enqueue_depth(uint8_t dev_id, uint8_t port_id);
+#define RTE_EVENT_PORT_ATTR_DEQ_DEPTH 1
+/**
+ * The new event threshold of the port
+ */
+#define RTE_EVENT_PORT_ATTR_NEW_EVENT_THRESHOLD 2
/**
- * Get the number of ports on a specific event device
+ * Get an attribute from a port.
*
- * @param dev_id
- * Event device identifier.
- * @return
- * - The number of configured ports
+ * @param dev_id Eventdev id
+ * @param port_id Eventdev port id
+ * @param attr_id The attribute ID to retrieve
+ * @param[out] attr_value A pointer that will be filled in with the attribute
+ * value if successful
+ *
+ * @retval 0 Successfully returned value
+ * -EINVAL Invalid device, port or attr_id, or attr_value was NULL
*/
-uint8_t
-rte_event_port_count(uint8_t dev_id);
+int
+rte_event_port_attr_get(uint8_t dev_id, uint8_t port_id, uint32_t attr_id,
+ uint32_t *attr_value);
/**
* Start an event device.
/**< The event generated from cpu for pipelining.
* Application may use *sub_event_type* to further classify the event
*/
+#define RTE_EVENT_TYPE_ETH_RX_ADAPTER 0x4
+/**< The event generated from event eth Rx adapter */
#define RTE_EVENT_TYPE_MAX 0x10
/**< Maximum number of event types */
#define RTE_EVENT_OP_FORWARD 1
/**< The CPU use this operation to forward the event to different event queue or
* change to new application specific flow or schedule type to enable
- * pipelining
+ * pipelining.
+ *
+ * This operation must only be enqueued to the same port that the
+ * event to be forwarded was dequeued from.
*/
#define RTE_EVENT_OP_RELEASE 2
/**< Release the flow context associated with the schedule type.
* or no scheduling context is held then this function may be an NOOP,
* depending on the implementation.
*
+ * This operation must only be enqueued to the same port that the
+ * event to be released was dequeued from.
+ *
*/
/**
};
};
+/* Ethdev Rx adapter capability bitmap flags */
+#define RTE_EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT 0x1
+/**< This flag is sent when the packet transfer mechanism is in HW.
+ * Ethdev can send packets to the event device using internal event port.
+ */
+#define RTE_EVENT_ETH_RX_ADAPTER_CAP_MULTI_EVENTQ 0x2
+/**< Adapter supports multiple event queues per ethdev. Every ethdev
+ * Rx queue can be connected to a unique event queue.
+ */
+#define RTE_EVENT_ETH_RX_ADAPTER_CAP_OVERRIDE_FLOW_ID 0x4
+/**< The application can override the adapter generated flow ID in the
+ * event. This flow ID can be specified when adding an ethdev Rx queue
+ * to the adapter using the ev member of struct rte_event_eth_rx_adapter
+ * @see struct rte_event_eth_rx_adapter_queue_conf::ev
+ * @see struct rte_event_eth_rx_adapter_queue_conf::rx_queue_flags
+ */
+
+/**
+ * Retrieve the event device's ethdev Rx adapter capabilities for the
+ * specified ethernet port
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param eth_port_id
+ * The identifier of the ethernet device.
+ *
+ * @param[out] caps
+ * A pointer to memory filled with Rx event adapter capabilities.
+ *
+ * @return
+ * - 0: Success, driver provides Rx event adapter capabilities for the
+ * ethernet device.
+ * - <0: Error code returned by the driver function.
+ *
+ */
+int
+rte_event_eth_rx_adapter_caps_get(uint8_t dev_id, uint8_t eth_port_id,
+ uint32_t *caps);
struct rte_eventdev_driver;
struct rte_eventdev_ops;
struct rte_eventdev;
-typedef void (*event_schedule_t)(struct rte_eventdev *dev);
-/**< @internal Schedule one or more events in the event dev. */
-
typedef uint16_t (*event_enqueue_t)(void *port, const struct rte_event *ev);
/**< @internal Enqueue event on port of a device */
/**< Number of event ports. */
void **ports;
/**< Array of pointers to ports. */
- uint8_t *ports_dequeue_depth;
- /**< Array of port dequeue depth. */
- uint8_t *ports_enqueue_depth;
- /**< Array of port enqueue depth. */
- uint8_t *queues_prio;
- /**< Array of queue priority. */
+ struct rte_event_port_conf *ports_cfg;
+ /**< Array of port configuration structures. */
+ struct rte_event_queue_conf *queues_cfg;
+ /**< Array of queue configuration structures. */
uint16_t *links_map;
/**< Memory to store queues to port connections. */
void *dev_private;
/**< Event device capabilities(RTE_EVENT_DEV_CAP_)*/
struct rte_event_dev_config dev_conf;
/**< Configuration applied to device. */
+ uint8_t service_inited;
+ /* Service initialization state */
+ uint32_t service_id;
+ /* Service ID*/
RTE_STD_C11
uint8_t dev_started : 1;
/** @internal The data structure associated with each event device. */
struct rte_eventdev {
- event_schedule_t schedule;
- /**< Pointer to PMD schedule function. */
event_enqueue_t enqueue;
/**< Pointer to PMD enqueue function. */
event_enqueue_burst_t enqueue_burst;
extern struct rte_eventdev *rte_eventdevs;
/** @internal The pool of rte_eventdev structures. */
-
-/**
- * Schedule one or more events in the event dev.
- *
- * An event dev implementation may define this is a NOOP, for instance if
- * the event dev performs its scheduling in hardware.
- *
- * @param dev_id
- * The identifier of the device.
- */
-static inline void
-rte_event_schedule(uint8_t dev_id)
-{
- struct rte_eventdev *dev = &rte_eventdevs[dev_id];
- if (*dev->schedule)
- (*dev->schedule)(dev);
-}
-
static __rte_always_inline uint16_t
__rte_event_enqueue_burst(uint8_t dev_id, uint8_t port_id,
const struct rte_event ev[], uint16_t nb_events,
* The *nb_events* parameter is the number of event objects to enqueue which are
* supplied in the *ev* array of *rte_event* structure.
*
+ * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be
+ * enqueued to the same port that their associated events were dequeued from.
+ *
* The rte_event_enqueue_burst() function returns the number of
* events objects it actually enqueued. A return value equal to *nb_events*
* means that all event objects have been enqueued.
* with RTE_EVENT_OP_RELEASE operation can be used to release the
* contexts early.
*
+ * Event operations RTE_EVENT_OP_FORWARD and RTE_EVENT_OP_RELEASE must only be
+ * enqueued to the same port that their associated events were dequeued from.
+ *
* @param dev_id
* The identifier of the device.
* @param port_id
rte_event_port_links_get(uint8_t dev_id, uint8_t port_id,
uint8_t queues[], uint8_t priorities[]);
+/**
+ * Retrieve the service ID of the event dev. If the adapter doesn't use
+ * a rte_service function, this function returns -ESRCH.
+ *
+ * @param dev_id
+ * The identifier of the device.
+ *
+ * @param [out] service_id
+ * A pointer to a uint32_t, to be filled in with the service id.
+ *
+ * @return
+ * - 0: Success
+ * - <0: Error code on failure, if the event dev doesn't use a rte_service
+ * function, this function returns -ESRCH.
+ */
+int
+rte_event_dev_service_id_get(uint8_t dev_id, uint32_t *service_id);
+
/**
* Dump internal information about *dev_id* to the FILE* provided in *f*.
*
Code Review / deb_dpdk.git / blobdiff