* buffers. The message buffers are stored in a mempool, using the
* RTE mempool library.
*
+ * The preferred way to create a mbuf pool is to use
+ * rte_pktmbuf_pool_create(). However, in some situations, an
+ * application may want to have more control (ex: populate the pool with
+ * specific memory), in this case it is possible to use functions from
+ * rte_mempool. See how rte_pktmbuf_pool_create() is implemented for
+ * details.
+ *
* This library provides an API to allocate/free packet mbufs, which are
* used to carry network packets.
*
*/
#define PKT_RX_LRO (1ULL << 16)
+/**
+ * Indicate that the timestamp field in the mbuf is valid.
+ */
+#define PKT_RX_TIMESTAMP (1ULL << 17)
+
/* add new RX flags here */
/* add new TX flags here */
+/**
+ * Offload the MACsec. This flag must be set by the application to enable
+ * this offload feature for a packet to be transmitted.
+ */
+#define PKT_TX_MACSEC (1ULL << 44)
+
/**
* Bits 45:48 used for the tunnel type.
* When doing Tx offload like TSO or checksum, the HW needs to configure the
*/
#define PKT_TX_OUTER_IPV6 (1ULL << 60)
+/**
+ * Bitmask of all supported packet Tx offload features flags,
+ * which can be set for packet.
+ */
+#define PKT_TX_OFFLOAD_MASK ( \
+ PKT_TX_IP_CKSUM | \
+ PKT_TX_L4_MASK | \
+ PKT_TX_OUTER_IP_CKSUM | \
+ PKT_TX_TCP_SEG | \
+ PKT_TX_IEEE1588_TMST | \
+ PKT_TX_QINQ_PKT | \
+ PKT_TX_VLAN_PKT | \
+ PKT_TX_TUNNEL_MASK | \
+ PKT_TX_MACSEC)
+
#define __RESERVED (1ULL << 61) /**< reserved for future mbuf use */
#define IND_ATTACHED_MBUF (1ULL << 62) /**< Indirect attached mbuf */
MARKER cacheline0;
void *buf_addr; /**< Virtual address of segment buffer. */
- phys_addr_t buf_physaddr; /**< Physical address of segment buffer. */
-
- uint16_t buf_len; /**< Length of segment buffer. */
+ /**
+ * Physical address of segment buffer.
+ * Force alignment to 8-bytes, so as to ensure we have the exact
+ * same mbuf cacheline0 layout for 32-bit and 64-bit. This makes
+ * working on vector drivers easier.
+ */
+ phys_addr_t buf_physaddr __rte_aligned(sizeof(phys_addr_t));
- /* next 6 bytes are initialised on RX descriptor rearm */
- MARKER8 rearm_data;
+ /* next 8 bytes are initialised on RX descriptor rearm */
+ MARKER64 rearm_data;
uint16_t data_off;
/**
- * 16-bit Reference counter.
+ * Reference counter. Its size should at least equal to the size
+ * of port field (16 bits), to support zero-copy broadcast.
* It should only be accessed using the following functions:
* rte_mbuf_refcnt_update(), rte_mbuf_refcnt_read(), and
* rte_mbuf_refcnt_set(). The functionality of these functions (atomic,
rte_atomic16_t refcnt_atomic; /**< Atomically accessed refcnt */
uint16_t refcnt; /**< Non-atomically accessed refcnt */
};
- uint8_t nb_segs; /**< Number of segments. */
- uint8_t port; /**< Input port. */
+ uint16_t nb_segs; /**< Number of segments. */
+
+ /** Input port (16 bits to support more than 256 virtual ports). */
+ uint16_t port;
uint64_t ol_flags; /**< Offload features. */
uint32_t usr; /**< User defined tags. See rte_distributor_process() */
} hash; /**< hash information */
- uint32_t seqn; /**< Sequence number. See also rte_reorder_insert() */
-
/** Outer VLAN TCI (CPU order), valid if PKT_RX_QINQ_STRIPPED is set. */
uint16_t vlan_tci_outer;
+ uint16_t buf_len; /**< Length of segment buffer. */
+
+ /** Valid if PKT_RX_TIMESTAMP is set. The unit and time reference
+ * are not normalized but are always the same for a given port.
+ */
+ uint64_t timestamp;
+
/* second cache line - fields only used in slow path or on TX */
MARKER cacheline1 __rte_cache_min_aligned;
/** Timesync flags for use with IEEE1588. */
uint16_t timesync;
+
+ /** Sequence number. See also rte_reorder_insert(). */
+ uint32_t seqn;
+
} __rte_cache_aligned;
/**
void
rte_mbuf_sanity_check(const struct rte_mbuf *m, int is_header);
+#define MBUF_RAW_ALLOC_CHECK(m) do { \
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1); \
+ RTE_ASSERT((m)->next == NULL); \
+ RTE_ASSERT((m)->nb_segs == 1); \
+ __rte_mbuf_sanity_check(m, 0); \
+} while (0)
+
/**
* Allocate an unitialized mbuf from mempool *mp*.
*
* initializing all the required fields. See rte_pktmbuf_reset().
* For standard needs, prefer rte_pktmbuf_alloc().
*
+ * The caller can expect that the following fields of the mbuf structure
+ * are initialized: buf_addr, buf_physaddr, buf_len, refcnt=1, nb_segs=1,
+ * next=NULL, pool, priv_size. The other fields must be initialized
+ * by the caller.
+ *
* @param mp
* The mempool from which mbuf is allocated.
* @return
if (rte_mempool_get(mp, &mb) < 0)
return NULL;
m = (struct rte_mbuf *)mb;
- RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
- rte_mbuf_refcnt_set(m, 1);
- __rte_mbuf_sanity_check(m, 0);
-
+ MBUF_RAW_ALLOC_CHECK(m);
return m;
}
/**
- * @internal Put mbuf back into its original mempool.
- * The use of that function is reserved for RTE internal needs.
- * Please use rte_pktmbuf_free().
+ * Put mbuf back into its original mempool.
+ *
+ * The caller must ensure that the mbuf is direct and properly
+ * reinitialized (refcnt=1, next=NULL, nb_segs=1), as done by
+ * rte_pktmbuf_prefree_seg().
+ *
+ * This function should be used with care, when optimization is
+ * required. For standard needs, prefer rte_pktmbuf_free() or
+ * rte_pktmbuf_free_seg().
*
* @param m
* The mbuf to be freed.
*/
static inline void __attribute__((always_inline))
-__rte_mbuf_raw_free(struct rte_mbuf *m)
+rte_mbuf_raw_free(struct rte_mbuf *m)
{
- RTE_ASSERT(rte_mbuf_refcnt_read(m) == 0);
+ RTE_ASSERT(RTE_MBUF_DIRECT(m));
+ RTE_ASSERT(rte_mbuf_refcnt_read(m) == 1);
+ RTE_ASSERT(m->next == NULL);
+ RTE_ASSERT(m->nb_segs == 1);
+ __rte_mbuf_sanity_check(m, 0);
rte_mempool_put(m->pool, m);
}
+/* compat with older versions */
+__rte_deprecated
+static inline void
+__rte_mbuf_raw_free(struct rte_mbuf *m)
+{
+ rte_mbuf_raw_free(m);
+}
+
/* Operations on ctrl mbuf */
/**
* This function initializes some fields in an mbuf structure that are
* not modified by the user once created (mbuf type, origin pool, buffer
* start address, and so on). This function is given as a callback function
- * to rte_mempool_create() at pool creation time.
+ * to rte_mempool_obj_iter() or rte_mempool_create() at pool creation time.
*
* @param mp
* The mempool from which the mbuf is allocated.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_obj_iter() or rte_mempool_create().
* @param m
* The mbuf to initialize.
* @param i
* This function initializes some fields in the mbuf structure that are
* not modified by the user once created (origin pool, buffer start
* address, and so on). This function is given as a callback function to
- * rte_mempool_create() at pool creation time.
+ * rte_mempool_obj_iter() or rte_mempool_create() at pool creation time.
*
* @param mp
* The mempool from which mbufs originate.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_obj_iter() or rte_mempool_create().
* @param m
* The mbuf to initialize.
* @param i
*
* This function initializes the mempool private data in the case of a
* pktmbuf pool. This private data is needed by the driver. The
- * function is given as a callback function to rte_mempool_create() at
+ * function must be called on the mempool before it is used, or it
+ * can be given as a callback function to rte_mempool_create() at
* pool creation. It can be extended by the user, for example, to
* provide another packet size.
*
* The mempool from which mbufs originate.
* @param opaque_arg
* A pointer that can be used by the user to retrieve useful information
- * for mbuf initialization. This pointer comes from the ``init_arg``
- * parameter of rte_mempool_create().
+ * for mbuf initialization. This pointer is the opaque argument passed to
+ * rte_mempool_create().
*/
void rte_pktmbuf_pool_init(struct rte_mempool *mp, void *opaque_arg);
* Create a mbuf pool.
*
* This function creates and initializes a packet mbuf pool. It is
- * a wrapper to rte_mempool_create() with the proper packet constructor
- * and mempool constructor.
+ * a wrapper to rte_mempool functions.
*
* @param name
* The name of the mbuf pool.
switch (count % 4) {
case 0:
while (idx != count) {
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
case 3:
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
case 2:
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
case 1:
- RTE_ASSERT(rte_mbuf_refcnt_read(mbufs[idx]) == 0);
- rte_mbuf_refcnt_set(mbufs[idx], 1);
+ MBUF_RAW_ALLOC_CHECK(mbufs[idx]);
rte_pktmbuf_reset(mbufs[idx]);
idx++;
+ /* fall-through */
}
}
return 0;
mi->buf_addr = m->buf_addr;
mi->buf_len = m->buf_len;
- mi->next = m->next;
mi->data_off = m->data_off;
mi->data_len = m->data_len;
mi->port = m->port;
mi->nb_segs = 1;
mi->ol_flags = m->ol_flags | IND_ATTACHED_MBUF;
mi->packet_type = m->packet_type;
+ mi->timestamp = m->timestamp;
__rte_mbuf_sanity_check(mi, 1);
__rte_mbuf_sanity_check(m, 0);
m->data_len = 0;
m->ol_flags = 0;
- if (rte_mbuf_refcnt_update(md, -1) == 0)
- __rte_mbuf_raw_free(md);
+ if (rte_mbuf_refcnt_update(md, -1) == 0) {
+ md->next = NULL;
+ md->nb_segs = 1;
+ rte_mbuf_refcnt_set(md, 1);
+ rte_mbuf_raw_free(md);
+ }
}
-static inline struct rte_mbuf* __attribute__((always_inline))
-__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+/**
+ * Decrease reference counter and unlink a mbuf segment
+ *
+ * This function does the same than a free, except that it does not
+ * return the segment to its pool.
+ * It decreases the reference counter, and if it reaches 0, it is
+ * detached from its parent for an indirect mbuf.
+ *
+ * @param m
+ * The mbuf to be unlinked
+ * @return
+ * - (m) if it is the last reference. It can be recycled or freed.
+ * - (NULL) if the mbuf still has remaining references on it.
+ */
+__attribute__((always_inline))
+static inline struct rte_mbuf *
+rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
{
__rte_mbuf_sanity_check(m, 0);
- if (likely(rte_mbuf_refcnt_update(m, -1) == 0)) {
- /* if this is an indirect mbuf, it is detached. */
+ if (likely(rte_mbuf_refcnt_read(m) == 1)) {
+
if (RTE_MBUF_INDIRECT(m))
rte_pktmbuf_detach(m);
+
+ if (m->next != NULL) {
+ m->next = NULL;
+ m->nb_segs = 1;
+ }
+
+ return m;
+
+ } else if (rte_atomic16_add_return(&m->refcnt_atomic, -1) == 0) {
+
+
+ if (RTE_MBUF_INDIRECT(m))
+ rte_pktmbuf_detach(m);
+
+ if (m->next != NULL) {
+ m->next = NULL;
+ m->nb_segs = 1;
+ }
+ rte_mbuf_refcnt_set(m, 1);
+
return m;
}
return NULL;
}
+/* deprecated, replaced by rte_pktmbuf_prefree_seg() */
+__rte_deprecated
+static inline struct rte_mbuf *
+__rte_pktmbuf_prefree_seg(struct rte_mbuf *m)
+{
+ return rte_pktmbuf_prefree_seg(m);
+}
+
/**
* Free a segment of a packet mbuf into its original mempool.
*
static inline void __attribute__((always_inline))
rte_pktmbuf_free_seg(struct rte_mbuf *m)
{
- if (likely(NULL != (m = __rte_pktmbuf_prefree_seg(m)))) {
- m->next = NULL;
- __rte_mbuf_raw_free(m);
- }
+ m = rte_pktmbuf_prefree_seg(m);
+ if (likely(m != NULL))
+ rte_mbuf_raw_free(m);
}
/**
return 0;
}
+/**
+ * Validate general requirements for Tx offload in mbuf.
+ *
+ * This function checks correctness and completeness of Tx offload settings.
+ *
+ * @param m
+ * The packet mbuf to be validated.
+ * @return
+ * 0 if packet is valid
+ */
+static inline int
+rte_validate_tx_offload(const struct rte_mbuf *m)
+{
+ uint64_t ol_flags = m->ol_flags;
+ uint64_t inner_l3_offset = m->l2_len;
+
+ /* Does packet set any of available offloads? */
+ if (!(ol_flags & PKT_TX_OFFLOAD_MASK))
+ return 0;
+
+ if (ol_flags & PKT_TX_OUTER_IP_CKSUM)
+ inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
+
+ /* Headers are fragmented */
+ if (rte_pktmbuf_data_len(m) < inner_l3_offset + m->l3_len + m->l4_len)
+ return -ENOTSUP;
+
+ /* IP checksum can be counted only for IPv4 packet */
+ if ((ol_flags & PKT_TX_IP_CKSUM) && (ol_flags & PKT_TX_IPV6))
+ return -EINVAL;
+
+ /* IP type not set when required */
+ if (ol_flags & (PKT_TX_L4_MASK | PKT_TX_TCP_SEG))
+ if (!(ol_flags & (PKT_TX_IPV4 | PKT_TX_IPV6)))
+ return -EINVAL;
+
+ /* Check requirements for TSO packet */
+ if (ol_flags & PKT_TX_TCP_SEG)
+ if ((m->tso_segsz == 0) ||
+ ((ol_flags & PKT_TX_IPV4) &&
+ !(ol_flags & PKT_TX_IP_CKSUM)))
+ return -EINVAL;
+
+ /* PKT_TX_OUTER_IP_CKSUM set for non outer IPv4 packet. */
+ if ((ol_flags & PKT_TX_OUTER_IP_CKSUM) &&
+ !(ol_flags & PKT_TX_OUTER_IPV4))
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * Linearize data in mbuf.
+ *
+ * This function moves the mbuf data in the first segment if there is enough
+ * tailroom. The subsequent segments are unchained and freed.
+ *
+ * @param mbuf
+ * mbuf to linearize
+ * @return
+ * - 0, on success
+ * - -1, on error
+ */
+static inline int
+rte_pktmbuf_linearize(struct rte_mbuf *mbuf)
+{
+ int seg_len, copy_len;
+ struct rte_mbuf *m;
+ struct rte_mbuf *m_next;
+ char *buffer;
+
+ if (rte_pktmbuf_is_contiguous(mbuf))
+ return 0;
+
+ /* Extend first segment to the total packet length */
+ copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
+
+ if (unlikely(copy_len > rte_pktmbuf_tailroom(mbuf)))
+ return -1;
+
+ buffer = rte_pktmbuf_mtod_offset(mbuf, char *, mbuf->data_len);
+ mbuf->data_len = (uint16_t)(mbuf->pkt_len);
+
+ /* Append data from next segments to the first one */
+ m = mbuf->next;
+ while (m != NULL) {
+ m_next = m->next;
+
+ seg_len = rte_pktmbuf_data_len(m);
+ rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
+ buffer += seg_len;
+
+ rte_pktmbuf_free_seg(m);
+ m = m_next;
+ }
+
+ mbuf->next = NULL;
+ mbuf->nb_segs = 1;
+
+ return 0;
+}
+
/**
* Dump an mbuf structure to a file.
*
Code Review / deb_dpdk.git / blobdiff