--- /dev/null
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# Copyright 2015 6WIND S.A.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Configuration, compilation and installation can be done at once
+# with make install T=<config>
+
+ifdef T # config, build and install combined
+# The build directory is T and may be prepended with O
+O ?= .
+RTE_OUTPUT := $O/$T
+else # standard install
+# Build directory is given with O=
+O ?= build
+RTE_OUTPUT := $O
+endif
+
+ifneq ($(MAKECMDGOALS),pre_install)
+include $(RTE_SDK)/mk/rte.vars.mk
+endif
+
+ifdef T # defaults with T= will install an almost flat staging tree
+export prefix ?=
+kerneldir ?= $(prefix)/kmod
+else
+ifeq ($(RTE_EXEC_ENV),linuxapp)
+kerneldir ?= /lib/modules/$(shell uname -r)/extra/dpdk
+else
+kerneldir ?= /boot/modules
+endif
+prefix ?= /usr/local
+endif
+exec_prefix ?= $(prefix)
+bindir ?= $(exec_prefix)/bin
+sbindir ?= $(exec_prefix)/sbin
+libdir ?= $(exec_prefix)/lib
+includedir ?= $(prefix)/include/dpdk
+datarootdir ?= $(prefix)/share
+docdir ?= $(datarootdir)/doc/dpdk
+datadir ?= $(datarootdir)/dpdk
+sdkdir ?= $(datadir)
+targetdir ?= $(datadir)/$(RTE_TARGET)
+
+# The install directories may be staged in DESTDIR
+
+# Create the directory $1 if not exists
+rte_mkdir = test -d $1 || mkdir -p $1
+
+# Create the relative symbolic link $2 -> $1
+# May be replaced with --relative option of ln from coreutils-8.16
+rte_symlink = ln -snf $$($(RTE_SDK)/scripts/relpath.sh $1 $(dir $2)) $2
+
+.PHONY: pre_install
+pre_install:
+ifdef T
+ $(Q)if [ ! -f $(RTE_OUTPUT)/.config ]; then \
+ $(MAKE) config O=$(RTE_OUTPUT); \
+ elif cmp -s $(RTE_OUTPUT)/.config.orig $(RTE_OUTPUT)/.config; then \
+ $(MAKE) config O=$(RTE_OUTPUT); \
+ else \
+ if [ -f $(RTE_OUTPUT)/.config.orig ] ; then \
+ tmp_build=$(RTE_OUTPUT)/.config.tmp; \
+ $(MAKE) config O=$$tmp_build; \
+ if ! cmp -s $(RTE_OUTPUT)/.config.orig $$tmp_build/.config ; then \
+ echo "Conflict: local config and template config have both changed"; \
+ exit 1; \
+ fi; \
+ fi; \
+ echo "Using local configuration"; \
+ fi
+ $(Q)$(MAKE) all O=$(RTE_OUTPUT)
+endif
+
+.PHONY: install
+install:
+ifeq ($(DESTDIR)$(if $T,,+),)
+ @echo Installation cannot run with T defined and DESTDIR undefined
+else
+ @echo ================== Installing $(DESTDIR)$(prefix)/
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-runtime
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-kmod
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-sdk
+ $(Q)$(MAKE) O=$(RTE_OUTPUT) T= install-doc
+ @echo Installation in $(DESTDIR)$(prefix)/ complete
+endif
+
+install-runtime:
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(libdir))
+ $(Q)cp -a $O/lib/* $(DESTDIR)$(libdir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(bindir))
+ $(Q)tar -cf - -C $O app --exclude 'app/*.map' \
+ --exclude 'app/cmdline*' --exclude app/test \
+ --exclude app/testacl --exclude app/testpipeline | \
+ tar -xf - -C $(DESTDIR)$(bindir) --strip-components=1 \
+ --keep-newer-files --warning=no-ignore-newer
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(datadir))
+ $(Q)cp -a $(RTE_SDK)/tools $(DESTDIR)$(datadir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(sbindir))
+ $(Q)$(call rte_symlink, $(DESTDIR)$(datadir)/tools/dpdk_nic_bind.py, \
+ $(DESTDIR)$(sbindir)/dpdk_nic_bind)
+
+install-kmod:
+ifneq ($(wildcard $O/kmod/*),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(kerneldir))
+ $(Q)cp -a $O/kmod/* $(DESTDIR)$(kerneldir)
+endif
+
+install-sdk:
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(includedir))
+ $(Q)tar -chf - -C $O include | \
+ tar -xf - -C $(DESTDIR)$(includedir) --strip-components=1 \
+ --keep-newer-files --warning=no-ignore-newer
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(sdkdir))
+ $(Q)cp -a $(RTE_SDK)/mk $(DESTDIR)$(sdkdir)
+ $(Q)cp -a $(RTE_SDK)/scripts $(DESTDIR)$(sdkdir)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(targetdir))
+ $(Q)cp -a $O/.config $(DESTDIR)$(targetdir)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(includedir), $(DESTDIR)$(targetdir)/include)
+ $(Q)$(call rte_symlink, $(DESTDIR)$(libdir), $(DESTDIR)$(targetdir)/lib)
+
+install-doc:
+ifneq ($(wildcard $O/doc),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(docdir))
+ $(Q)tar -cf - -C $O/doc html --exclude 'html/guides/.*' | \
+ tar -xf - -C $(DESTDIR)$(docdir) --strip-components=1 \
+ --keep-newer-files --warning=no-ignore-newer
+endif
+ifneq ($(wildcard $O/doc/*/*/*pdf),)
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(docdir)/guides)
+ $(Q)cp -a $O/doc/*/*/*pdf $(DESTDIR)$(docdir)/guides
+endif
+ $(Q)$(call rte_mkdir, $(DESTDIR)$(datadir))
+ $(Q)cp -a $(RTE_SDK)/examples $(DESTDIR)$(datadir)
Code Review / deb_dpdk.git / blobdiff