--- /dev/null
+#! /bin/sh -e
+
+# BSD LICENSE
+#
+# Copyright 2015 6WIND S.A.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+default_path=$PATH
+
+# Load config options:
+# - AESNI_MULTI_BUFFER_LIB_PATH
+# - DPDK_BUILD_TEST_CONFIGS (defconfig1+option1+option2 defconfig2)
+# - DPDK_DEP_CFLAGS
+# - DPDK_DEP_LDFLAGS
+# - DPDK_DEP_MOFED (y/[n])
+# - DPDK_DEP_PCAP (y/[n])
+# - DPDK_DEP_SSL (y/[n])
+# - DPDK_DEP_SZE (y/[n])
+# - DPDK_DEP_ZLIB (y/[n])
+# - DPDK_MAKE_JOBS (int)
+# - DPDK_NOTIFY (notify-send)
+# - LIBSSO_PATH
+. $(dirname $(readlink -e $0))/load-devel-config.sh
+
+print_usage () {
+ echo "usage: $(basename $0) [-h] [-jX] [-s] [config1 [config2] ...]]"
+}
+
+print_help () {
+ echo 'Test building several targets with different options'
+ echo
+ print_usage
+ cat <<- END_OF_HELP
+
+ options:
+ -h this help
+ -jX use X parallel jobs in "make"
+ -s short test with only first config without examples/doc
+
+ config: defconfig[[~][+]option1[[~][+]option2...]]
+ Example: x86_64-native-linuxapp-gcc+debug~RXTX_CALLBACKS
+ The lowercase options are defined inside $(basename $0).
+ The uppercase options can be the end of a defconfig option
+ to enable if prefixed with '+' or to disable if prefixed with '~'.
+ Default is to automatically enable most of the options.
+ The external dependencies are setup with DPDK_DEP_* variables.
+ If no config on command line, DPDK_BUILD_TEST_CONFIGS is used.
+ END_OF_HELP
+}
+
+J=$DPDK_MAKE_JOBS
+short=false
+unset verbose
+maxerr=-Wfatal-errors
+while getopts hj:sv ARG ; do
+ case $ARG in
+ j ) J=$OPTARG ;;
+ s ) short=true ;;
+ v ) verbose='V=1' ;;
+ h ) print_help ; exit 0 ;;
+ ? ) print_usage ; exit 1 ;;
+ esac
+done
+shift $(($OPTIND - 1))
+configs=${*:-$DPDK_BUILD_TEST_CONFIGS}
+
+success=false
+on_exit ()
+{
+ if [ "$DPDK_NOTIFY" = notify-send ] ; then
+ if $success ; then
+ notify-send -u low --icon=dialog-information 'DPDK build' 'finished'
+ elif [ -z "$signal" ] ; then
+ notify-send -u low --icon=dialog-error 'DPDK build' 'failed'
+ fi
+ fi
+}
+# catch manual interrupt to ignore notification
+trap "signal=INT ; trap - INT ; kill -INT $$" INT
+# notify result on exit
+trap on_exit EXIT
+
+cd $(dirname $(readlink -m $0))/..
+
+reset_env ()
+{
+ export PATH=$default_path
+ unset CROSS
+ unset DPDK_DEP_CFLAGS
+ unset DPDK_DEP_LDFLAGS
+ unset DPDK_DEP_MOFED
+ unset DPDK_DEP_PCAP
+ unset DPDK_DEP_SSL
+ unset DPDK_DEP_SZE
+ unset DPDK_DEP_ZLIB
+ unset AESNI_MULTI_BUFFER_LIB_PATH
+ unset LIBSSO_PATH
+ unset PQOS_INSTALL_PATH
+}
+
+config () # <directory> <target> <options>
+{
+ if [ ! -e $1/.config ] ; then
+ echo "================== Configure $1"
+ make T=$2 O=$1 config
+
+ echo 'Customize configuration'
+ # Built-in options (lowercase)
+ ! echo $3 | grep -q '+default' || \
+ sed -ri 's,(RTE_MACHINE=")native,\1default,' $1/.config
+ echo $3 | grep -q '+next' || \
+ sed -ri 's,(NEXT_ABI=)y,\1n,' $1/.config
+ ! echo $3 | grep -q '+shared' || \
+ sed -ri 's,(SHARED_LIB=)n,\1y,' $1/.config
+ ! echo $3 | grep -q '+debug' || ( \
+ sed -ri 's,(_DEBUG.*=)n,\1y,' $1/.config
+ sed -ri 's,(_STAT.*=)n,\1y,' $1/.config
+ sed -ri 's,(TEST_PMD_RECORD_.*=)n,\1y,' $1/.config )
+
+ # Automatic configuration
+ ! echo $2 | grep -q '^x86_64' || \
+ sed -ri 's,(NUMA=)n,\1y,' $1/.config
+ sed -ri 's,(PCI_CONFIG=)n,\1y,' $1/.config
+ sed -ri 's,(LIBRTE_IEEE1588=)n,\1y,' $1/.config
+ sed -ri 's,(BYPASS=)n,\1y,' $1/.config
+ test "$DPDK_DEP_MOFED" != y || \
+ sed -ri 's,(MLX._PMD=)n,\1y,' $1/.config
+ test "$DPDK_DEP_SZE" != y || \
+ sed -ri 's,(PMD_SZEDATA2=)n,\1y,' $1/.config
+ test "$DPDK_DEP_ZLIB" != y || \
+ sed -ri 's,(BNX2X_PMD=)n,\1y,' $1/.config
+ sed -ri 's,(NFP_PMD=)n,\1y,' $1/.config
+ test "$DPDK_DEP_PCAP" != y || \
+ sed -ri 's,(PCAP=)n,\1y,' $1/.config
+ test -z "$AESNI_MULTI_BUFFER_LIB_PATH" || \
+ sed -ri 's,(PMD_AESNI_MB=)n,\1y,' $1/.config
+ test -z "$AESNI_MULTI_BUFFER_LIB_PATH" || \
+ sed -ri 's,(PMD_AESNI_GCM=)n,\1y,' $1/.config
+ test -z "$LIBSSO_PATH" || \
+ sed -ri 's,(PMD_SNOW3G=)n,\1y,' $1/.config
+ test "$DPDK_DEP_SSL" != y || \
+ sed -ri 's,(PMD_QAT=)n,\1y,' $1/.config
+ sed -ri 's,(KNI_VHOST.*=)n,\1y,' $1/.config
+ sed -ri 's,(SCHED_.*=)n,\1y,' $1/.config
+ build_config_hook $1 $2 $3
+
+ # Explicit enabler/disabler (uppercase)
+ for option in $(echo $3 | sed 's,[~+], &,g') ; do
+ pattern=$(echo $option | cut -c2-)
+ if echo $option | grep -q '^~' ; then
+ sed -ri "s,($pattern=)y,\1n," $1/.config
+ elif echo $option | grep -q '^+' ; then
+ sed -ri "s,($pattern=)n,\1y," $1/.config
+ fi
+ done
+ fi
+}
+
+# default empty hook to override in devel config
+build_config_hook () # <directory> <target> <options>
+{
+ :
+}
+
+for conf in $configs ; do
+ target=$(echo $conf | sed 's,[~+].*,,')
+ # reload config with DPDK_TARGET set
+ DPDK_TARGET=$target
+ reset_env
+ . $(dirname $(readlink -e $0))/load-devel-config.sh
+
+ options=$(echo $conf | sed 's,[^~+]*,,')
+ dir=$conf
+ config $dir $target $options
+
+ echo "================== Build $dir"
+ make -j$J EXTRA_CFLAGS="$maxerr $DPDK_DEP_CFLAGS" \
+ EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose O=$dir
+ ! $short || break
+ echo "================== Build examples for $dir"
+ export RTE_SDK=$(pwd)
+ export RTE_TARGET=$dir
+ make -j$J -sC examples \
+ EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose \
+ O=$(readlink -m $dir/examples)
+ ! echo $target | grep -q '^x86_64' || \
+ make -j$J -sC examples/performance-thread \
+ EXTRA_LDFLAGS="$DPDK_DEP_LDFLAGS" $verbose \
+ O=$(readlink -m $dir/examples/performance-thread)
+ unset RTE_TARGET
+ echo "################## $dir done."
+done
+
+if ! $short ; then
+ mkdir -p .check
+ echo "================== Build doxygen HTML API"
+ make doc-api-html >/dev/null 2>.check/doc.txt
+ echo "================== Build sphinx HTML guides"
+ make doc-guides-html >/dev/null 2>>.check/doc.txt
+ echo "================== Check docs"
+ diff -u /dev/null .check/doc.txt
+fi
+
+success=true
Code Review / deb_dpdk.git / blobdiff